Hse alert 11 2017 lack of ppe enforcement
•Download as DOCX, PDF•
0 likes•35 views
LACK OF PPE ENFORCEMENT During the past four project site visits by QHSE Manager, it was observed that: • A total of 103 Company workers were not wearing high visibility vests • Foreman, Supervisors, engineers and HSE staff were in the vicinity on each occasion • Site security staff were permitting workers to enter the site without PPE Company have HSE Policies of “Zero Tolerance”, “Don’t Walk By” and “No PPE-No Work”. All Project HSE Managers are required to: 1. Provide re-induction to all foremen, supervisors, site engineers and HSE about PPE requirements and their responsibility to enforce the rules. 2. Instruct site security not to permit any worker on to the site without PPE. 3. Place one HSE Staff at the site entrance at start of the day and end, and at break periods. 4. Issue Don’t Walk By with yellow card warning to the supervisor, foreman or engineer where workers under their responsibility are not wearing PPE. 5. Place pictorial notices at site entrances, canteens, toilets and lifts warning “No PPE-No Work”. 6. All sites to have emergency/surplus PPE for visitors and workers. 7. Conduct at least one fire drill per month, segregate all workers not wearing PPE, take their details and submit report to Project Manager and c.c Umair Haider. 8. Any worker who arrives on site, or who is found on site without PPE, must not be allowed to work on site until he has all appropriate PPE. “Provide PPE or send them back to camp”.
Report
Share
Report
Share
Recommended
ehs
The document outlines the objectives and policies of an EHS (Environment, Health and Safety) department for a construction company. The key objectives are to determine EHS parameters, establish command structure for hazard prevention, define responsibilities, identify hazardous operations, and focus on performance improvement. It also details general EHS rules and regulations for workers, applicable legal requirements, and an overview of available personal protective equipment including safety helmets, shoes, ear and eye protection, gloves, harnesses, and safety nets.
SAFETY INSPECTOR
This document is a resume for Muhammad Nadeem Sheikh, who is seeking a position as a safety inspector in the United Arab Emirates. It summarizes his 20 years of experience in education and working as an HSE (health, safety, and environment) officer on various construction projects. It also lists his qualifications, which include international certifications in safety management and first aid.
Construction Site Hazards & Safety Equipment
This PPT consist of construction site hazards and safety equipment. Which really important for site engineering and project manager. Because they are responsible for there labors safety.
5 basic safety tips for construction workers
This document provides 5 basic safety tips for construction workers:
1. Wear proper protective equipment like hard hats, safety glasses, gloves, boots, and fall protection harnesses.
2. Inspect work areas like ladders and scaffolds for safety issues before using.
3. Use electrical tools and heavy equipment safely and only after proper training.
4. Keep a first aid kit accessible on site in case of minor injuries.
5. Maintain fencing, be aware of fire hazards, and know emergency procedures.
Worker safety hand book
This document provides a summary of health and safety guidelines for employees. It begins by emphasizing that accidents can cause suffering and that safety should not be compromised for any reason. The document then outlines various safety policies and procedures for employees to follow, including proper use of personal protective equipment, working at heights, electrical safety, fire prevention, plant and machinery operation, and more. Employees are asked to acknowledge receiving the handbook and agreeing to comply with all health and safety requirements.
Construction Site Safety
The document outlines 9 steps to ensure safety at a construction site as described by Sailesh Mahimtura. The steps are: 1) know the site thoroughly, 2) train all personnel about site safety, 3) mark unsafe and hazardous materials, 4) inspect equipment to ensure it is working properly, 5) use harnesses and safety equipment for roof and scaffold work, 6) provide personal protective equipment, 7) ensure Occupational Safety and Health Administration standards are met, 8) prepare for emergencies, and 9) barricade the site after working hours. Following these steps can help maintain safety at the risky construction environment.
CV-HSE sayed abdallah
Sayed Abdallah has over 14 years of experience as a Senior HSE Engineer in Egypt. He has extensive experience developing and implementing HSE management systems according to international standards like OHSAS 18001 and ISO 14001. He is certified in several health and safety programs and has provided training through various training centers in the Middle East region. He is seeking a new position as a Senior HSE Engineer or Instructor in the oil, gas, or petrochemical industries in the Middle East or Gulf area.
SITE INDUCTION Version 2
This induction provides information to new workers about a photovoltaic plant project, including installing security fencing, mounting solar panels, and trenching for cables. It outlines key personnel such as the project manager and site manager, as well as contractors working on the project. The induction details health and safety responsibilities and requirements like using proper personal protective equipment. It also describes site rules, welfare facilities, emergency procedures, accident reporting, and environmental protection protocols. Hazards addressed include overhead power lines and moving vehicles and heavy machinery.
Recommended
ehs
The document outlines the objectives and policies of an EHS (Environment, Health and Safety) department for a construction company. The key objectives are to determine EHS parameters, establish command structure for hazard prevention, define responsibilities, identify hazardous operations, and focus on performance improvement. It also details general EHS rules and regulations for workers, applicable legal requirements, and an overview of available personal protective equipment including safety helmets, shoes, ear and eye protection, gloves, harnesses, and safety nets.
SAFETY INSPECTOR
This document is a resume for Muhammad Nadeem Sheikh, who is seeking a position as a safety inspector in the United Arab Emirates. It summarizes his 20 years of experience in education and working as an HSE (health, safety, and environment) officer on various construction projects. It also lists his qualifications, which include international certifications in safety management and first aid.
Construction Site Hazards & Safety Equipment
This PPT consist of construction site hazards and safety equipment. Which really important for site engineering and project manager. Because they are responsible for there labors safety.
5 basic safety tips for construction workers
This document provides 5 basic safety tips for construction workers:
1. Wear proper protective equipment like hard hats, safety glasses, gloves, boots, and fall protection harnesses.
2. Inspect work areas like ladders and scaffolds for safety issues before using.
3. Use electrical tools and heavy equipment safely and only after proper training.
4. Keep a first aid kit accessible on site in case of minor injuries.
5. Maintain fencing, be aware of fire hazards, and know emergency procedures.
Worker safety hand book
This document provides a summary of health and safety guidelines for employees. It begins by emphasizing that accidents can cause suffering and that safety should not be compromised for any reason. The document then outlines various safety policies and procedures for employees to follow, including proper use of personal protective equipment, working at heights, electrical safety, fire prevention, plant and machinery operation, and more. Employees are asked to acknowledge receiving the handbook and agreeing to comply with all health and safety requirements.
Construction Site Safety
The document outlines 9 steps to ensure safety at a construction site as described by Sailesh Mahimtura. The steps are: 1) know the site thoroughly, 2) train all personnel about site safety, 3) mark unsafe and hazardous materials, 4) inspect equipment to ensure it is working properly, 5) use harnesses and safety equipment for roof and scaffold work, 6) provide personal protective equipment, 7) ensure Occupational Safety and Health Administration standards are met, 8) prepare for emergencies, and 9) barricade the site after working hours. Following these steps can help maintain safety at the risky construction environment.
CV-HSE sayed abdallah
Sayed Abdallah has over 14 years of experience as a Senior HSE Engineer in Egypt. He has extensive experience developing and implementing HSE management systems according to international standards like OHSAS 18001 and ISO 14001. He is certified in several health and safety programs and has provided training through various training centers in the Middle East region. He is seeking a new position as a Senior HSE Engineer or Instructor in the oil, gas, or petrochemical industries in the Middle East or Gulf area.
SITE INDUCTION Version 2
This induction provides information to new workers about a photovoltaic plant project, including installing security fencing, mounting solar panels, and trenching for cables. It outlines key personnel such as the project manager and site manager, as well as contractors working on the project. The induction details health and safety responsibilities and requirements like using proper personal protective equipment. It also describes site rules, welfare facilities, emergency procedures, accident reporting, and environmental protection protocols. Hazards addressed include overhead power lines and moving vehicles and heavy machinery.
All important 10 health and safety guidelines
Clearly, there are some industries and roles that are deemed more ‘risky’ than others.
The best that can happen is good practices being implemented across all arenas so that employees do not face unnecessary or uncontrolled risks while performing their jobs.
Standard Safety Instructions 2012
Standardised Safety Instructions being implemented effective 01.01.2012 covering all jobs executed in Company towards ready reckoner for Supervisors.
cpwd training
The document provides details about the author's summer training project at the Central Public Works Department (CPWD) construction site at the National Institute of Technology in Durgapur, India. It acknowledges and thanks various CPWD officials and others who supported the project. The preface explains that the report gives a detailed description of site visits, interactions with engineers, and lessons learned about construction principles and machinery. It provides background about CPWD, an overview of the hostel construction project, and covers topics like site location, safety procedures, formwork, sequencing of structural work, project monitoring, quality control, and conclusions.
CONFINED SPACES
This document contains a risk assessment for confined space entry. It identifies hazards such as explosion, fire, oxygen deficiency, combustible atmospheres, chemical exposure, and heat stress. The consequences are listed as serious or fatal injuries from explosion, fire, or cave-ins. Control measures outlined include permitting, isolation, cleaning, gas testing, use of breathing apparatus, rescue equipment, communication procedures, and training for all involved personnel.
AHU.pdf
This document provides a method statement for installing an air handling unit (AHU). It outlines the responsibilities of the project manager, quality engineer, site engineer, surveyor, and safety officer to ensure installation is completed safely according to approved plans and specifications. Equipment like mechanical hand tools, a mobile crane, and forklift will be used. The AHU will be stored properly and transported to the installation site using a crane or forklift. It will then be set in place, connected to ductwork and electrical lines. Personal protective equipment and safety measures will be implemented during installation to protect worker health and safety.
Site_Safety_Induction on Health, Safety and Environment .pdf
Welcome to the definitive guide on site safety induction. In this comprehensive article, we delve into the critical aspects of ensuring safety on construction sites and beyond. This guide is designed to equip both employers and employees with the knowledge and tools necessary to create a secure work environment.
We kick off by establishing the importance of site safety, emphasizing its role in protecting lives, minimizing accidents, and adhering to legal requirements. From there, we navigate through the maze of regulations, shedding light on the legal obligations that govern safety practices.
Moving forward, we explore the shared responsibilities of employers and employees in maintaining a safe workplace. We delve into the intricacies of hazard identification and risk assessment, providing practical tips on spotting potential dangers and implementing effective risk mitigation strategies.
Personal Protective Equipment (PPE) takes center stage as we outline its significance in safeguarding against various hazards. We provide a comprehensive overview of different types of PPE, their proper usage, and maintenance protocols.
No stone is left unturned as we delve into safety procedures and protocols, arming readers with the knowledge to navigate emergency situations with confidence. From fire emergencies to medical incidents, we offer step-by-step guidance on handling crises effectively.
But safety induction isn't a one-size-fits-all approach. We recognize the importance of addressing site-specific hazards, tailoring safety measures to suit the unique challenges of different work environments.
Training and education emerge as cornerstones of a robust safety culture. We emphasize the importance of ongoing training initiatives, empowering workers with the skills and knowledge needed to stay safe on the job.
Drawing from real-life examples and case studies, we illustrate the tangible impact of safety practices on construction sites. From success stories to cautionary tales, these anecdotes serve as powerful reminders of the stakes at hand.
In conclusion, this article serves as a comprehensive roadmap to site safety induction, offering invaluable insights and practical advice for fostering a culture of safety in the workplace. Whether you're a seasoned professional or a newcomer to the industry, this guide is your ultimate companion in the journey towards a safer tomorrow."
Nurse Onboard Training Lesson 2: Work Safety and Policies
The document outlines workplace safety policies and procedures related to COVID-19. It discusses monitoring employee temperatures, encouraging distancing and working from home when sick. Visitors must complete forms, wear masks and meetings should be spaced at least 1.5m apart. Upon returning to work, risk assessments and training are required. Employees diagnosed with COVID-19 should isolate, notify authorities and be tested, and exposed coworkers may be referred for screening.
AMA 2A SHE Induction 2022....pdf
This document provides a safety induction for a brewery extension project. It outlines training topics such as site entry procedures, emergency procedures, hazards and controls, permits for high risk work, and personal protective equipment requirements. Specific hazards covered include working at heights, hot works, electricity, excavations, confined spaces, and chemicals. The document details emergency contacts and response procedures. It establishes disciplinary actions for safety violations and lists general site safety rules. Important safety signs on site are also noted.
008-SWMS-GENERAL-ONSITE-ACTIVITIES-AND-REPAIRS.pdf
This document provides a safe work method statement for general activities and onsite service and repairs to earthmoving machinery and equipment. It outlines 24 steps for common tasks involved and identifies potential hazards at each step. It then provides controls and safe work procedures to minimize risks. Responsibilities are identified for each step. The purpose is to ensure work is performed safely in accordance with the identified procedures and controls.
DPL-SP - Safety Induction Presentation 00.pptx
This document provides safety guidelines for a construction project. It outlines various safety procedures and requirements, including:
- Requiring the use of personal protective equipment (PPE) like helmets and safety shoes.
- Emergency procedures like emergency contact numbers and evacuation plans in case of an emergency.
- Permit requirements for hazardous work like working at heights or in confined spaces.
- General safety guidelines around hazards like electricity, lifting equipment, ladders, scaffolds, excavations, hand tools, and vehicle operation.
General Safety Protocols on Manufacturing Plant
PS I do not own any of the pictures.
Sources:
•http://www.worksafebc.com/publications/health_and_safety/by_topic/assets/pdf/manufacturing_safety.pdf
•http://www2.dupont.com/Supplier_Center/en_US/library/Pencader_RJScholl_051010rev02.pdf
•http://www.safeworkaustralia.gov.au/sites/SWA/about/Publications/Documents/695/Managing-Risks-Plant-V2.pdf
3220 warehouse
This document discusses common warehouse hazards and solutions to improve worker safety. The top 10 OSHA standards that warehouses are cited for include forklifts, hazard communication, electrical wiring methods, electrical system design, guarding floor and wall openings, exits, mechanical power transmission, respiratory protection, lockout/tagout, and portable fire extinguishers. Potential warehouse hazards include unsafe forklift use, improper stacking, lack of personal protective equipment, improper lockout/tagout procedures, inadequate fire safety, and repetitive motion injuries. Solutions provided for various hazards include proper training, equipment maintenance, safety signage, lockout/tagout programs, and use of personal protective equipment.
update 20feb1
This document provides a summary of Rickie Gerard Christie's qualifications and experience for an oil and gas position. It outlines his 14 years of experience operating casing/tubing tongs and tubular handling equipment. It also details his education in Bachelor of Arts and skills in mechanical aptitude, QHSE procedures, communication, and computer software. Finally, it lists his extensive experience with various tongs, power units, elevators, and other oilfield equipment from his roles as a floorman, roustabout pusher, crane operator, and trainee marine engineer over his career.
Site Induction
This document provides an induction for a construction site. It summarizes site layout, parking, entry and sign in procedures. It outlines required personal protective equipment and site rules regarding safety certification, vehicle operation, emergencies, fire equipment, signage, working at heights, ladders, manual handling and noise levels. The induction is intended to provide essential safety information to all workers on the site.
Form on1
This document provides safety guidelines for productions in Ontario. It outlines requirements for personal protective equipment, training, inspections, incident reporting, and enforcement of safe practices. Crew must read safety materials and be trained on any equipment, activities or chemicals requiring specialized instruction. Supervisors are responsible for safety compliance and reporting hazards. All crew must follow safe practices, attend safety meetings, and report any unsafe conditions. Specific guidelines address clothing, confined spaces, firearms, stunts, special effects, and vehicle safety.
Form on1
1) This document outlines safety guidelines for a general production, including requirements for personal protective equipment, training, duties of supervisors, and safe work practices.
2) It requires that all employees read and understand the safety guidelines, attend safety meetings, and report any unsafe conditions.
3) Supervisors are responsible for ensuring their subordinates are appropriately trained and following all safety rules. Failure to comply could result in delays or shutdowns enforced by regulators.
HSE O-CV
This document is the curriculum vitae of Sanjay P. Gunge, who is applying for the position of HSE Officer/Manager. It summarizes his educational qualifications including a B.Sc in Industrial Chemistry and diploma in Industrial Safety Management. It also outlines his 12 years of experience in health, safety and environment roles. Currently, he works as an HSE Officer in Kuwait where his responsibilities include outlining safe practices, conducting risk assessments, ensuring compliance with management standards, and investigating incidents. Previously he held similar HSE roles in Kuwait and Saudi Arabia.
irfan cv
This document contains the resume of Irfan Ullah, who has 1 year of experience as an HSE Officer at Al Naboodah Contracting Company in Dubai. He holds certifications in Occupational Health and Safety from the UK as well as fire safety training. As an HSE Officer, his responsibilities include ensuring workplace safety, conducting inspections, developing safety procedures, investigating accidents, and ensuring subcontractors comply with health and safety standards. He seeks to promote a safety-focused work culture and aims to complete tasks safely while meeting deadlines.
Site Induction
This document provides an induction for contractors working on the site of the World Meeting of Families Solemn Eucharistic Celebration event in Phoenix Park. It outlines the site layout, safety rules and procedures, potential hazards, required personal protective equipment, emergency procedures, and other important information to ensure the health and safety of all workers.
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB
More Related Content
Similar to Hse alert 11 2017 lack of ppe enforcement
All important 10 health and safety guidelines
Clearly, there are some industries and roles that are deemed more ‘risky’ than others.
The best that can happen is good practices being implemented across all arenas so that employees do not face unnecessary or uncontrolled risks while performing their jobs.
Standard Safety Instructions 2012
Standardised Safety Instructions being implemented effective 01.01.2012 covering all jobs executed in Company towards ready reckoner for Supervisors.
cpwd training
The document provides details about the author's summer training project at the Central Public Works Department (CPWD) construction site at the National Institute of Technology in Durgapur, India. It acknowledges and thanks various CPWD officials and others who supported the project. The preface explains that the report gives a detailed description of site visits, interactions with engineers, and lessons learned about construction principles and machinery. It provides background about CPWD, an overview of the hostel construction project, and covers topics like site location, safety procedures, formwork, sequencing of structural work, project monitoring, quality control, and conclusions.
CONFINED SPACES
This document contains a risk assessment for confined space entry. It identifies hazards such as explosion, fire, oxygen deficiency, combustible atmospheres, chemical exposure, and heat stress. The consequences are listed as serious or fatal injuries from explosion, fire, or cave-ins. Control measures outlined include permitting, isolation, cleaning, gas testing, use of breathing apparatus, rescue equipment, communication procedures, and training for all involved personnel.
AHU.pdf
This document provides a method statement for installing an air handling unit (AHU). It outlines the responsibilities of the project manager, quality engineer, site engineer, surveyor, and safety officer to ensure installation is completed safely according to approved plans and specifications. Equipment like mechanical hand tools, a mobile crane, and forklift will be used. The AHU will be stored properly and transported to the installation site using a crane or forklift. It will then be set in place, connected to ductwork and electrical lines. Personal protective equipment and safety measures will be implemented during installation to protect worker health and safety.
Site_Safety_Induction on Health, Safety and Environment .pdf
Welcome to the definitive guide on site safety induction. In this comprehensive article, we delve into the critical aspects of ensuring safety on construction sites and beyond. This guide is designed to equip both employers and employees with the knowledge and tools necessary to create a secure work environment.
We kick off by establishing the importance of site safety, emphasizing its role in protecting lives, minimizing accidents, and adhering to legal requirements. From there, we navigate through the maze of regulations, shedding light on the legal obligations that govern safety practices.
Moving forward, we explore the shared responsibilities of employers and employees in maintaining a safe workplace. We delve into the intricacies of hazard identification and risk assessment, providing practical tips on spotting potential dangers and implementing effective risk mitigation strategies.
Personal Protective Equipment (PPE) takes center stage as we outline its significance in safeguarding against various hazards. We provide a comprehensive overview of different types of PPE, their proper usage, and maintenance protocols.
No stone is left unturned as we delve into safety procedures and protocols, arming readers with the knowledge to navigate emergency situations with confidence. From fire emergencies to medical incidents, we offer step-by-step guidance on handling crises effectively.
But safety induction isn't a one-size-fits-all approach. We recognize the importance of addressing site-specific hazards, tailoring safety measures to suit the unique challenges of different work environments.
Training and education emerge as cornerstones of a robust safety culture. We emphasize the importance of ongoing training initiatives, empowering workers with the skills and knowledge needed to stay safe on the job.
Drawing from real-life examples and case studies, we illustrate the tangible impact of safety practices on construction sites. From success stories to cautionary tales, these anecdotes serve as powerful reminders of the stakes at hand.
In conclusion, this article serves as a comprehensive roadmap to site safety induction, offering invaluable insights and practical advice for fostering a culture of safety in the workplace. Whether you're a seasoned professional or a newcomer to the industry, this guide is your ultimate companion in the journey towards a safer tomorrow."
Nurse Onboard Training Lesson 2: Work Safety and Policies
The document outlines workplace safety policies and procedures related to COVID-19. It discusses monitoring employee temperatures, encouraging distancing and working from home when sick. Visitors must complete forms, wear masks and meetings should be spaced at least 1.5m apart. Upon returning to work, risk assessments and training are required. Employees diagnosed with COVID-19 should isolate, notify authorities and be tested, and exposed coworkers may be referred for screening.
AMA 2A SHE Induction 2022....pdf
This document provides a safety induction for a brewery extension project. It outlines training topics such as site entry procedures, emergency procedures, hazards and controls, permits for high risk work, and personal protective equipment requirements. Specific hazards covered include working at heights, hot works, electricity, excavations, confined spaces, and chemicals. The document details emergency contacts and response procedures. It establishes disciplinary actions for safety violations and lists general site safety rules. Important safety signs on site are also noted.
008-SWMS-GENERAL-ONSITE-ACTIVITIES-AND-REPAIRS.pdf
This document provides a safe work method statement for general activities and onsite service and repairs to earthmoving machinery and equipment. It outlines 24 steps for common tasks involved and identifies potential hazards at each step. It then provides controls and safe work procedures to minimize risks. Responsibilities are identified for each step. The purpose is to ensure work is performed safely in accordance with the identified procedures and controls.
DPL-SP - Safety Induction Presentation 00.pptx
This document provides safety guidelines for a construction project. It outlines various safety procedures and requirements, including:
- Requiring the use of personal protective equipment (PPE) like helmets and safety shoes.
- Emergency procedures like emergency contact numbers and evacuation plans in case of an emergency.
- Permit requirements for hazardous work like working at heights or in confined spaces.
- General safety guidelines around hazards like electricity, lifting equipment, ladders, scaffolds, excavations, hand tools, and vehicle operation.
General Safety Protocols on Manufacturing Plant
PS I do not own any of the pictures.
Sources:
•http://www.worksafebc.com/publications/health_and_safety/by_topic/assets/pdf/manufacturing_safety.pdf
•http://www2.dupont.com/Supplier_Center/en_US/library/Pencader_RJScholl_051010rev02.pdf
•http://www.safeworkaustralia.gov.au/sites/SWA/about/Publications/Documents/695/Managing-Risks-Plant-V2.pdf
3220 warehouse
This document discusses common warehouse hazards and solutions to improve worker safety. The top 10 OSHA standards that warehouses are cited for include forklifts, hazard communication, electrical wiring methods, electrical system design, guarding floor and wall openings, exits, mechanical power transmission, respiratory protection, lockout/tagout, and portable fire extinguishers. Potential warehouse hazards include unsafe forklift use, improper stacking, lack of personal protective equipment, improper lockout/tagout procedures, inadequate fire safety, and repetitive motion injuries. Solutions provided for various hazards include proper training, equipment maintenance, safety signage, lockout/tagout programs, and use of personal protective equipment.
update 20feb1
This document provides a summary of Rickie Gerard Christie's qualifications and experience for an oil and gas position. It outlines his 14 years of experience operating casing/tubing tongs and tubular handling equipment. It also details his education in Bachelor of Arts and skills in mechanical aptitude, QHSE procedures, communication, and computer software. Finally, it lists his extensive experience with various tongs, power units, elevators, and other oilfield equipment from his roles as a floorman, roustabout pusher, crane operator, and trainee marine engineer over his career.
Site Induction
This document provides an induction for a construction site. It summarizes site layout, parking, entry and sign in procedures. It outlines required personal protective equipment and site rules regarding safety certification, vehicle operation, emergencies, fire equipment, signage, working at heights, ladders, manual handling and noise levels. The induction is intended to provide essential safety information to all workers on the site.
Form on1
This document provides safety guidelines for productions in Ontario. It outlines requirements for personal protective equipment, training, inspections, incident reporting, and enforcement of safe practices. Crew must read safety materials and be trained on any equipment, activities or chemicals requiring specialized instruction. Supervisors are responsible for safety compliance and reporting hazards. All crew must follow safe practices, attend safety meetings, and report any unsafe conditions. Specific guidelines address clothing, confined spaces, firearms, stunts, special effects, and vehicle safety.
Form on1
1) This document outlines safety guidelines for a general production, including requirements for personal protective equipment, training, duties of supervisors, and safe work practices.
2) It requires that all employees read and understand the safety guidelines, attend safety meetings, and report any unsafe conditions.
3) Supervisors are responsible for ensuring their subordinates are appropriately trained and following all safety rules. Failure to comply could result in delays or shutdowns enforced by regulators.
HSE O-CV
This document is the curriculum vitae of Sanjay P. Gunge, who is applying for the position of HSE Officer/Manager. It summarizes his educational qualifications including a B.Sc in Industrial Chemistry and diploma in Industrial Safety Management. It also outlines his 12 years of experience in health, safety and environment roles. Currently, he works as an HSE Officer in Kuwait where his responsibilities include outlining safe practices, conducting risk assessments, ensuring compliance with management standards, and investigating incidents. Previously he held similar HSE roles in Kuwait and Saudi Arabia.
irfan cv
This document contains the resume of Irfan Ullah, who has 1 year of experience as an HSE Officer at Al Naboodah Contracting Company in Dubai. He holds certifications in Occupational Health and Safety from the UK as well as fire safety training. As an HSE Officer, his responsibilities include ensuring workplace safety, conducting inspections, developing safety procedures, investigating accidents, and ensuring subcontractors comply with health and safety standards. He seeks to promote a safety-focused work culture and aims to complete tasks safely while meeting deadlines.
Site Induction
This document provides an induction for contractors working on the site of the World Meeting of Families Solemn Eucharistic Celebration event in Phoenix Park. It outlines the site layout, safety rules and procedures, potential hazards, required personal protective equipment, emergency procedures, and other important information to ensure the health and safety of all workers.
Similar to Hse alert 11 2017 lack of ppe enforcement (20)
Site_Safety_Induction on Health, Safety and Environment .pdf
Site_Safety_Induction on Health, Safety and Environment .pdf
Nurse Onboard Training Lesson 2: Work Safety and Policies
Nurse Onboard Training Lesson 2: Work Safety and Policies
008-SWMS-GENERAL-ONSITE-ACTIVITIES-AND-REPAIRS.pdf
008-SWMS-GENERAL-ONSITE-ACTIVITIES-AND-REPAIRS.pdf
More from Dwarika Bhushan Sharma
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB
3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP.pdf
3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP-STOP FALLS, CLEAN UP, PICK UP, WIPE UP
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK 2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK
1-HAZARDOUS CHEMICALS.pdf
This document provides the name of a company but no other details. It contains only the words "Company Name" with no other context or information provided. In just two words, the document states the name of a company without any other descriptive text.
PRE-START BRIEFING Form # HSEQ - PSB Rev 2 -.docx
Project Information:
Project Name:
Location: Supervisor :
Company name : Date:
Task Description:
Before work starts, the following must be in place
Induction Supervision Test Certificates Communication in same language Method Statement Risk Assessment Permit To Work Area Lighting
SELECT HAZARDS SELECT CONTROLS
( Tick to identify the controls in place)
Fall from height Training Access Ladder Access Handrail Edge Protection Secure Ladder Adequate Work Platform Guards for Openings Safety Harness Life Lines
Others( Specify)
Manual Handling Training Check Weight Mechanical Aids Access Route Team Lifting Wrong method Right Method
Power tools Training Color code inspection tag Check Cable Wheel guards Safe plug & sockets Cable Protection Proper Scaffold Cable Overhead Rotatory part guards
Scaffold Scaffold Tag Edge Protection Check Overhead works Access Ladder Adequate Work Platform Weather condition Out riggers Ladder 3 feet above platform Safety Harness
SELECT HAZARDS SELECT CONTROLS
( Tick to identify the controls in place)
Risk Assessment
Lifting Plan Tag Lines Lifting points / hooks Banks man Load stability Check Lifting gear Examination /Inspection Sharp edges protected
Lifting operations Weather/ Wind Speed Ground conditions Exclusion zone Communication Loading/ unloading vehicles Spreader Beams Check Ground conditions Check outriggers Others
Fire Fire Extinguisher Fire Hose Fire Exit Assembly point others
Slip/Trip Clean before you go Barricade the waste Waste Management Clean Access Housekeeping Clean liquid spillage Access signs Maintain access/ Egress
PPE
Safety Harness
Safety Helmet Coveralls Hi vis Jacket Safety Shoe Face Shield Ear Protection
Dust mask Respiratory Equipment Life line/ harness anchorage Hand Gloves Goggles/ Glass
Pre start Briefing done by: Signature:
Reviewed By HSE Manager/ In charge: Signature:
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
Code of Practice
C.O.P # 01
Fire Prevention Requirements
(Management of Combustible Materials & Electrical Inspections)
Rev. 01, Mar 23
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
This document is a sub-contractor pre-start HSE checklist that must be filled out daily before starting any activity. It collects project information, task details including description, location, workers and duration. It also checks that various HSE prerequisites are in place such as safety inductions, risk assessments, PPE availability, inspection of tools and equipment, and that unsafe conditions have been rectified. The sub-contractor must acknowledge that all precautions and control measures have been taken and the workers have been deemed competent to perform the task safely.
STORE INSPECTION Form # HSEQ - Form 2 Rev 2.docx
Project Information
Project Name: Store No.
Location: Contact Person:
Company Name: Arabtec Construction LLC. Date:
Sr. Description Yes No N/A Comments
1. Is access to stores are restricted to authorized personnel only?
2. Are there clear spaces around racks and stacks of stored materials and are adequate gangways provided between them?
3. Are stacks and storage kept clear of light fittings and hot surfaces?
4. Are all stocks of flammable liquids kept in purpose-built flammable storage liquid stores?
5. Are storage areas generally cleaned and tidy?
6. Are flammable liquids kept away from all possible sources of ignition?
7. Emergency exit signs are available in right locations
8. Smoke detectors/fire alarm are visible and accessible.
9. Fire extinguishers are available are serviced regularly
10. Are free standing shelves and cupboards secured for stability?
11. Are heavy items stored at a suitable height?
12. Are chemical containers used for storage suitable and clearly labelled?
13. Is there adequate light in the storage area?
14. Are all small loose items secured in appropriate storage?
15. Are warning notices, prohibiting smoking and naked lights prominently displayed?
16. Others if any:
Remarks:
Inspected by: Signature:
Reviewed by Project Manager/HSE Manager Signature:
WITNESS STATEMENT FORM.docx
This document records a statement for a project located at an unspecified location. The statement is provided and written by an individual who acknowledges that the information is true to the best of their recollection. The individual provides their name, signature, position and date at the end of the statement.
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
1. Project Information:
Project Name: Click here to enter text.
Report No.: Click here to enter text.
Project Location: Click here to enter text.
Property No.: Click here to enter text.
☐ Fatality ☐ Major Injury ☐ Minor Injury ☐ Property Damage ☐ Environmental ☐ Other
2. Describe the Incident in detail:
Answer who, what, why, where, when & how in this section: (Attach additional pages if required)
3. Incident Root Causes:
Describe direct, indirect & root cause: (Attach additional pages if required)
4. Key Corrections Taken Immediately after the Incident:
Attach additional pages if more space is required:
5. Key Corrective Actions to Prevent Recurrence:
Describe the corrective actions with timeframe: (Attach additional pages if required)
Corporate Office Remarks:
HSE FORMS (COVER PAGE)2 Form # HSEQ - Rev 2.docx
This document pertains to health, safety, environment, and quality forms from an HSEQ department. The HSEQ department handles forms related to health, safety, environment, and quality assurance. No other details are provided about the specific forms or purpose of the HSEQ department.
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Control Measures: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement & Risk assessment developed, approved & communicated? ☐ ☐ ☐
Availability of rescue procedure and equipment? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Workplace appropriately illuminated ☐ ☐ ☐
Any high risk activity associated that requires PTW (i.e. hot work, CSE)? ☐ ☐ ☐
Forced ventilation provided? ☐ ☐ ☐
Are all necessary Permit approved and displayed at work location? ☐ ☐ ☐
Means of communication available? (Mobile, radio etc.) ☐ ☐ ☐
Safe access / Working Platform provided? ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
Availability of barricades/protection to prevent unauthorized or accidental entry? ☐ ☐ ☐
Life Line provided? ☐ ☐ ☐
Warning signs posted? ☐ ☐ ☐
Fall Protection equipment (e.g. full body harness) available? ☐ ☐ ☐
Availability of Fall protection arrangement? ☐ ☐ ☐
Other(s): ☐ ☐ ☐
Adequate Lighting provided? ☐ ☐ ☐
☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Location / Area :
Panel No : Voltage:
Permit Validity:
Time (from): _______Hrs.
Time (To): __________Hrs.
Date:
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
No: Checks Yes-No-NA Checks Yes-No-NA
ENERGIZATION (“Power On”) ISOLATION (“Power Off”)
1. Safety tool box briefing done. ☐ ☐ ☐
Method statement/Risk assessment in place. ☐ ☐ ☐
2. Authorized personnel / operators available. ☐ ☐ ☐
Authorized personnel / operators available. ☐ ☐ ☐
3. Method statement/Risk assessment in place. ☐ ☐ ☐
Adjacent live areas protected. ☐ ☐ ☐
4. Safety Barriers in place and safety signage Displayed. ☐ ☐ ☐
PPE available, high voltage rubber gloves, Safety goggles and floor mat. ☐ ☐ ☐
5. Working area is well lighted. ☐ ☐ ☐
Isolation/Lock-out in place. ☐ ☐ ☐
6. Electrical instruments are available for any Purpose. ☐ ☐ ☐
Electrical circuits “proved” by calibrated Instrument and found out to be no power. ☐ ☐ ☐
7. Correct PPE available, high voltage rubber Gloves, safety goggles and floor mat. ☐ ☐ ☐
Unauthorized workers are cleared from the Area. ☐ ☐ ☐
8. Approved WIR for installation, testing and Termination are attached to the permit. ☐ ☐ ☐
Standby operatives in the event of contact With live circuits. ☐ ☐ ☐
9. Emergency light (Flashlight) available. ☐ ☐ ☐
Emergency light (Flashlight) available. ☐ ☐ ☐
10. Is live work absolutely necessary? ☐ ☐ ☐
Emergency response plan available ☐ ☐ ☐
11. Unauthorized workers are cleared from the area.
☐ ☐ ☐
Other ( Specify): ☒ ☐ ☐
12. Power cable route from panel board to plant & equipment has been checked ☐ ☐ ☐
13 Emergency response plan available ☐ ☐ ☐
14 Other ( Specify): ☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
Project Information
Project Name:
Date: Location:
Sr. Equipment type / Name Registration No & Exp Date Company Name
Operator Name / Mb. No Operator Third party competency certificate expiry date Operator License expiry date Equipment & Plant 3rd Party Inspection Certificate expiry date SWL / Capacity Signalman /Rigger name & TPC Exp Comment
1
2
3
4
5
6
7
8
9
10.
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge: Signature:
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
This 5-page document is a checklist for inspecting labour accommodation on a weekly basis. It contains over 100 questions across various categories including access/egress, housekeeping, septic tanks, food preparation, living quarters, firefighting, emergency procedures, first aid, record keeping, environment, and civil defence requirements. Inspectors are to verify that accommodation meets standards for safety, sanitation, emergency preparedness and regulatory compliance by completing the checklist and noting any needed corrective actions or due dates.
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
INCIDENT INVESTIGATION REPORT
(To be submitted to the HSEQ Corporate Office within 7 days of incident.)
1. Project Information:
Project Name: Click here to enter text.
Report No.: Click here to enter text.
Project Location: Click here to enter text.
Property No.: Click here to enter text.
☐ Fatality ☐ Major Incident ☐ Minor Incident
2. Describe the Incident in detail:
Answer who, what, why, where, when & how in this section: (Attach additional pages if required)
Click here to enter text.
☐ Photos Attached
3. Incident Root Causes:
Describe direct, indirect & root cause: (Attach additional pages if required)
Click here to enter text.
4. Key Corrective Actions to Prevent Recurrence:
Describe the corrective actions with timeframe: (Attach additional pages if required)
Click here to enter text.
5. Key Corrections Taken Immediately after the Incident:
Attach additional pages if more space is required:
Click here to enter text.
6. Witnesses:
I declare that I witnessed the incident and the information provided above is true, correct and complete.
No. Name Designation Signature Date
1. Click here to enter text.
Click here to enter text.
Click here to enter text.
2. Click here to enter text.
Click here to enter text.
Click here to enter text.
7. Incident Information:
Initial Incident Report No.: Click here to enter text.
Date Reported: Click here to enter text.
Date of Incident: Click here to enter text.
Time of Incident: Click here to enter text.
Type of Incident: ☐ Near Miss
☐ Major Environmental Incident
☐ Serious Dangerous Occurrence
☐ Equipment / Property Damage
☐ Medical Treatment Case (MTC)
☐ Restricted Work Case (RWC)
☐ Lost Workday Case (LWC)
☐ Serious Occupational Illness/Disease
☐ Class 1 Injuries
☐ Permanent Partial Disability (PPD)
☐ Permanent Total Disability (PTD)
☐ Fatality (F)
Recordkeeping: ☐ Reportable ☐ Recordable
Incident Location on Site: Click here to enter text.
Applicable Reports: ☐ Police
☐ Medical
☐ Other (Specify)
Click here to enter text.
Attached: ☐ Yes ☐ No
☐ Yes ☐ No
☐ Yes ☐ No
8. Injured Person’s Personal Details:
In case of an incident with more than one injured person, complete the information for each person using separate forms.
Name: Click here to enter text.
Occupation: Click here to enter text.
Company: Click here to enter text.
MB / Oracle No.: Click here to enter text.
Nationality: Click here to enter text.
Date of Birth: Click here to enter text.
Passport Number: Click here to enter text.
Length of Service: Click here to enter text.
Gender: ☐ Male ☐ Female
Labour Card No.: Click here to enter text.
9. Incident Causes Details: To be supported with factual evidence
Immediate Cause
(Unsafe Acts) ☐ Failure to secure
☐ Failure to warn
☐ Removing / Defeating Safety Devices
☐
HSE INDUCTION Form # HSEQ - HSEI Rev 2 -.doc
HSE INDUCTION
(Workers)
Name: _________________________________ Trade: ____________________________
M.B. No./Company Name : ________________
Date of Joining: __________________________
SL. N SUBJECT ON INDUCTION PREVIOUS SAFETY EXPOSURE FURTHER SAFETY TRAINING NEED ANALYSIS
1. Introduction Safety Requirements
2. Working Safety is of Primary Importance
3. General Safety Rules
4. Basic Safety Requirements
5. House Keeping
6. Health, Hygiene & Welfare Facilities
7. Fire Extinguisher / Fire Fighting
8. Emergency Procedure
9. Safety Violations & Penalty
10. Safety Award
11. Manual Handling
Induction Given By: Name: ___________________________
Designation: ___________________________
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
1st Warning 0 Ref. No. ______________
2nd Warning 0
3rd Warning 0
4th Warning 0 Date: ________________
Employee’s Name : ______________________________________ M.B No. : __________
Occupation : _____________________________________________________________________
Location / Project Site: _____________________________________________________________________
You have committed the following HSE violation/s:
………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….….
The employee is hereby warned that if the violation is repeated further disciplinary action can be
taken as per the company Code of Conduct.
ORIGINATOR APPROVED BY (MANAGER IN CHARGE / ARABTEC HSEQ & ORG. RISK Manager)
Name: _______________________________ Name: _____________________________
Designation: _______________________________ Designation: _____________________________
Signature:
_______________________________ Signature:
_____________________________
Employee Acknowledgement:
I the undersigned have received this Safety warning letter / disciplinary notice and I admit that I have understood the contents.
0 Received on: ………………………….. (Date) Signature: ………………………………..…..
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
Project Information
Project Name: Porta Cabin No:
Location: Contact Person:
Company Name: Date :
Sr. Description Yes No N/A Comments
1. Emergency exit signs are available in right locations
2. Fire alarms and fire extinguishers are visible and accessible.
3. Fire doors (e.g. in stairways) are kept closed unless equipped with automatic closing device
4. Fire extinguishers are serviced regularly
5. Corridors and stairways are kept free of obstruction
6. Fire escape/ evacuation plan available and posted
7. First aid box available
8. Floor surfaces are kept dry and free of slip hazards
9. Electrical cords and plugs are in good condition with proper Grounding
10. Kitchen equipment checked
11. Fire blanket available in the pantry
12. Heat detector available in the pantry
13. Toilets floor clean and dry
14. Are staff trained to use Fire Extinguishers
15. Hand wash/ soap solution available in the toilet
16. Civil Defense or Authority approval
17. Others if any:
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
More from Dwarika Bhushan Sharma (20)
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
Recently uploaded
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Recently uploaded (20)
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Hse alert 11 2017 lack of ppe enforcement
- 1. LACK OF PPE ENFORCEMENT During the past four project site visits by QHSE Manager, it was observed that: A total of 103 Company workers were not wearing high visibility vests Foreman, Supervisors, engineers and HSE staff were in the vicinity on each occasion Site security staff were permitting workers to enter the site without PPE Company have HSE Policies of “ZeroTolerance”, “Don’t Walk By”and “NoPPE-No Work”. All Project HSE Managers are required to: 1. Provide re-induction to all foremen, supervisors, site engineers and HSE about PPE requirements and their responsibility to enforce the rules. 2. Instruct site security not to permit any worker on to the site without PPE. 3. Place one HSE Staff at the site entrance at start of the day and end, and at break periods. 4. Issue Don’t Walk By with yellow card warning to the supervisor, foreman or engineer where workers under their responsibility are not wearing PPE. 5. Place pictorial notices at site entrances, canteens, toilets and lifts warning “No PPE-No Work”. 6. All sites to have emergency/surplus PPE for visitors and workers. 7. Conduct at least one fire drill per month, segregate all workers not wearing PPE, take their details and submit report to Project Manager and c.c Umair Haider. 8. Any worker who arrives on site, or who is found on site without PPE, mustnot be allowed to work on site until he has all appropriate PPE. “Provide PPE or send them back to camp”. HSE ALERT # 11