HOME AUTOMATION CUM BUILDING SECUIRITY SYSTEM ELECTRONICS PROJECT
•Download as PPT, PDF•
1 like•285 views
This document describes a home security and automation system that uses a microcontroller to control and monitor various functions. The system has two main sections: home automation and home security. The home automation section controls the water pump based on tank and pond water levels and timers. It also controls garden watering and porch lighting schedules. The home security section detects intruders on four sides using sensors, monitors the area with a rotating camera, detects door breaking, and includes an electronic siren and telephone dialer. The heart of the project is an AT89C51 microcontroller that handles all the functions.
Report
Share
Report
Share
Recommended
temperature controller
Automation becomes a very basic need in any industry. Every available sensors are used to detect desired physical quantity and it must be control. In this presentation, how the temperature is measured using sensor and control using micro controller is described.
EMS Presentation
This document describes Class Two Electrical & EMS's energy management solutions and real-time energy monitoring products. It provides an overview of their standard and customizable solutions for utilities, businesses, schools, and residential properties. Their product line includes ZigBee-enabled local servers, smart thermostats, smart plugs, load control modules, and various sensors that allow for automated control, load control, energy tracking, and security. The GridRabbit system forms a wireless mesh network to remotely control and monitor energy usage and HVAC performance in real-time. Alarms can also be configured to detect inefficiencies, equipment faults, unexpected temperature changes, and more.
Overheat and smoke detection with gsm
Major Project Report on overheat and smoke detection with GSM module in final year of Undergraduate course in Electronics and Communication Engineering
Neomitis rt0 rt1-rt7-rf
This digital room thermostat has been designed for easy operation and installation. It has a large LCD display, rotary dial, and simple programming to help save energy. Models include basic on/off (RT0 RF) or daily/weekly scheduling (RT1 RF, RT7 RF). They install on walls or table stands, have a wireless receiver, and 2-year battery life. This thermostat range offers flexible, efficient temperature control for heating systems.
FMS intro
The document describes a fuel monitoring system that can monitor fuel stock in tanks and fuel flow in pipes. It monitors power generated by diesel generators (DG). The system provides benefits such as controlling operating expenses, timely notification of alarms, and planning resources in advance. Key features of the system include precise and continuous measurement using pressure sensors and monitoring fuel theft. The system allows for effective logistics, service level assurance for customers, stopping fraud, and identifying technical faults. It uses GPRS or SMS for control and communication and can log data with battery backup. The central software system provides alarms, action scenarios, analytics, customization and APIs. It provides online information on fuel levels, generator activity, fuel and electricity consumption, and environmental parameters.
Micronics Portaflow PF440IP - Portable Ultrasonic Clamp On Flow Meter
The Portaflow PF440IP is a portable flow meter from Micronics for non-invasive liquid flow measurement from outside pipes. It offers quick, accurate flow readings through an easy menu and setup, with results within minutes. The PF440IP is compact, rugged, and reliable with an IP67 case and IP68 sensors, designed to perform sustained measurements in harsh environments, including external pipe and submerged applications for up to 4 months with 1-hour interval logging. It uses Doppler ultrasound technology and has a wide flow velocity and temperature range along with data logging and output capabilities.
Energy Eye -save 35%of your energy costs
Smart Hotel Solutions is an Australian company that provides energy saving solutions to hotels. Their energy management system, called Energy Eye, uses wireless sensors and controllers to automatically shut off HVAC systems in unoccupied guest rooms to reduce energy costs and carbon emissions. Hotels can save 25-35% on utility expenses with Energy Eye, which has a quick return on investment of 2-3 years. The system is easy to install and program without disrupting hotel operations or guest comfort.
Temperature Monitoring System with 4 Sensors
The TV2 stores over 80,000 temperatures for each sensors, which means that it will store over 1.5 year of temperature history if you are sampling temperature once every 10 minutes. If you are logging temperature and humidity it will store nine months of history for each of the four sensors. Although the TV2 can store and display temperature from absolute zero to thousands of degrees, the actual temperatures collected depends on the type of sensors being used.
Recommended
temperature controller
Automation becomes a very basic need in any industry. Every available sensors are used to detect desired physical quantity and it must be control. In this presentation, how the temperature is measured using sensor and control using micro controller is described.
EMS Presentation
This document describes Class Two Electrical & EMS's energy management solutions and real-time energy monitoring products. It provides an overview of their standard and customizable solutions for utilities, businesses, schools, and residential properties. Their product line includes ZigBee-enabled local servers, smart thermostats, smart plugs, load control modules, and various sensors that allow for automated control, load control, energy tracking, and security. The GridRabbit system forms a wireless mesh network to remotely control and monitor energy usage and HVAC performance in real-time. Alarms can also be configured to detect inefficiencies, equipment faults, unexpected temperature changes, and more.
Overheat and smoke detection with gsm
Major Project Report on overheat and smoke detection with GSM module in final year of Undergraduate course in Electronics and Communication Engineering
Neomitis rt0 rt1-rt7-rf
This digital room thermostat has been designed for easy operation and installation. It has a large LCD display, rotary dial, and simple programming to help save energy. Models include basic on/off (RT0 RF) or daily/weekly scheduling (RT1 RF, RT7 RF). They install on walls or table stands, have a wireless receiver, and 2-year battery life. This thermostat range offers flexible, efficient temperature control for heating systems.
FMS intro
The document describes a fuel monitoring system that can monitor fuel stock in tanks and fuel flow in pipes. It monitors power generated by diesel generators (DG). The system provides benefits such as controlling operating expenses, timely notification of alarms, and planning resources in advance. Key features of the system include precise and continuous measurement using pressure sensors and monitoring fuel theft. The system allows for effective logistics, service level assurance for customers, stopping fraud, and identifying technical faults. It uses GPRS or SMS for control and communication and can log data with battery backup. The central software system provides alarms, action scenarios, analytics, customization and APIs. It provides online information on fuel levels, generator activity, fuel and electricity consumption, and environmental parameters.
Micronics Portaflow PF440IP - Portable Ultrasonic Clamp On Flow Meter
The Portaflow PF440IP is a portable flow meter from Micronics for non-invasive liquid flow measurement from outside pipes. It offers quick, accurate flow readings through an easy menu and setup, with results within minutes. The PF440IP is compact, rugged, and reliable with an IP67 case and IP68 sensors, designed to perform sustained measurements in harsh environments, including external pipe and submerged applications for up to 4 months with 1-hour interval logging. It uses Doppler ultrasound technology and has a wide flow velocity and temperature range along with data logging and output capabilities.
Energy Eye -save 35%of your energy costs
Smart Hotel Solutions is an Australian company that provides energy saving solutions to hotels. Their energy management system, called Energy Eye, uses wireless sensors and controllers to automatically shut off HVAC systems in unoccupied guest rooms to reduce energy costs and carbon emissions. Hotels can save 25-35% on utility expenses with Energy Eye, which has a quick return on investment of 2-3 years. The system is easy to install and program without disrupting hotel operations or guest comfort.
Temperature Monitoring System with 4 Sensors
The TV2 stores over 80,000 temperatures for each sensors, which means that it will store over 1.5 year of temperature history if you are sampling temperature once every 10 minutes. If you are logging temperature and humidity it will store nine months of history for each of the four sensors. Although the TV2 can store and display temperature from absolute zero to thousands of degrees, the actual temperatures collected depends on the type of sensors being used.
Centralized Cooling System1
The document summarizes a proposal for a centralized monitored cooling system for a Dubai project. It includes:
- Details on the refrigeration units and compressors needed, with a total cooling capacity requirement of 84kW.
- Descriptions of the physical systems including vibration isolation, electrical boards meeting standards, and refrigeration pipes made of copper.
- An overview of the electronic monitoring system which allows remote control and monitoring of parameters, alarms, and historical data filing for maintenance.
- An 18-month warranty on refrigeration plant parts, excluding some damages and wear items.
A brief about building management system
A Building Management System is a computer-based control system that is installed in the buildings in order to control and monitor the mechanical and electrical equipment of the building including lighting, fire systems, ventilation, security systems etc.
1314 datasheet 0
The Innova 1314 Photoacoustic Monitor is a highly accurate and reliable system for quantitatively monitoring gas concentrations. It uses photoacoustic infrared detection to measure up to five gases and water vapor with detection limits in the ppb range. The monitor compensates for environmental factors to ensure accurate measurements and performs self-tests to ensure reliability. It has easy-to-use interfaces and requires minimal maintenance, needing recalibration only one to two times per year.
TemperatureRecorder
The document outlines a temperature recorder project for Varian Medical Systems that involves connecting to multiple temperature sensors placed throughout a factory to record and log temperatures to a database on an ongoing basis. It will monitor temperatures and send alert notifications if any temperatures fall outside a preset range, as well as sending weekly status emails. Screenshots are included showing the proposed home screen, temperature graph, and message log interfaces.
Office automation system front
This document is a project report for an office automation system created by Md. Ashfaqul Haque. The system uses various sensors and components like Arduino, servo motor, flame sensor, RFID, PIR motion sensor and LCD to automate door opening/closing, fire detection, light control and more. It aims to create a safe and energy efficient automated office environment. The report describes the components used, circuit operation with block and schematic diagrams, and advantages like energy savings. It concludes the system achieves its goals of automating the office while increasing safety and efficiency.
VOICE CALL AND SMS CALL ALERT SYSTEM FOR MONITORING TEMPERATURE, HUMIDITY, WA...
The system works with SIM card and has a battery backup for 48 hours. The system will make phone calls and SMS to 8 operators and will deliver a voice message and SMS indicating the type of failure occurred. The phone calls will be made until the problem is rectified (This can be
Programmed to set a delay) In case of power failure, an SMS will be sent immediately. All programming can be done by sending SMS One authorized person can activate or deactivate the device by sending SMS
B. S. K. Technologies, Secunderabad, Humidity Meters
Suppliers and Exporter of professional Test and Measuring Instruments such as Humidity Meters, Hygro Meter BSK Technologies, Thermo Hygro Meters, Thermo Meters, Temperature Meter, Infra thermo meters, Temperature Meters, Temperature Indicator, Infra Red Thermometer, Temperature Data Loggers, A Datalogger Low Cost Model, Humidity Logger, Temperature Data Logger, A Digital Flow meters, Environment Meters, Transmitters.
Equilab al 204 aluminum metal analyzer
The AL-204 has been specially designed to quickly and accurately determine the concentration of aluminium in slags. Via the analysis of the gases resulting from the attack to the sample with Sodium Hydroxide (NaOH) you can quickly obtain – in just ten minutes – and accurately – a precision of >99% - the percentage of aluminium contained in the sample.
Development of on line monitoring system of substation power equipment based ...
The document proposes developing an online monitoring system for substation power equipment based on the IEEE1588 standard. This system would use a PIC microcontroller to sense temperature, current and voltage from sensors, store the data in EEPROM, and upload it to the internet via Ethernet. By implementing precise time synchronization between master and slave clocks over Ethernet using IEEE1588, the system allows real-time remote monitoring of substation status from anywhere.
4byte2fg
This document describes a home system that controls and communicates with various home devices and appliances. It consists of a settop box that runs a scriptable software core to manage queues, process data and activate signals to influence connected devices. A patented junction box hardware allows control of all home consumers via standard communication. The system provides energy consumption data, peripheral data and maintenance reminders while controlling temperature, lighting, shutters and more through an event-driven software interface.
Technician Training: Safety basics
This document provides an overview of safety basics for technician training, including general safety, electrical safety, mechanical safety, and preventing spills and overfills. It outlines key safety requirements such as following detailed lockout/tagout procedures, checking that equipment is de-energized before working on it, making sure piping and tanks are properly isolated and drained before work, wearing appropriate protective equipment, attending safety meetings, and being aware of electrical area classifications and their implications. Compliance with comprehensive jobsite safety programs is critical.
POSTER PRESENTATION ZARIF 2016
This document describes a student project to design and implement a wireless sensor system for monitoring temperature and humidity in a greenhouse growing Typhonium Flagelliforme plants. Sensor circuits using a DHT11 temperature and humidity sensor and an ESP8266 WiFi module were developed to acquire environmental data and transmit it to a website for monitoring. The sensors were installed in a greenhouse and successfully measured and transmitted the temperature and humidity levels to improve control of the greenhouse conditions and reduce human error in management.
Temperature Control System Using Pid Controller
This document describes a temperature control system using a PID controller. It includes a block diagram and overall circuit diagram of the system. The system works by using a temperature sensor to provide feedback on the current temperature, which is compared to the setpoint temperature and used by the PID controller to regulate a heating element or fan to maintain the desired temperature. The document also discusses the PID tuning methods, applications of microcontrollers in temperature control, and concludes the system is able to accurately sense and maintain temperature using an LM35 temperature sensor and PIC16F873A microcontroller.
Wireless irrigation System
This is a wireless irrigation control system including main controller, pump controller and valve controller. Main controller is to connect with your Hunter/Toro irrigation unit. Pump controller is to connect with the main pump, when there is valve on, pump will be on. Valve controller is to connect each solenoid valve, when Hunter asked the valve ON, related valve will be ON
IoT Smart System Technology 2020
This document discusses an IoT smart utility system solution for a private utility company. It aims to address problems with manual meter reading, business processes, usage control and billing, and customer complaints. The solution involves implementing an end-to-end IoT solution using devices, gateways, networks and applications to connect smart meters and sensors. This allows for automated remote monitoring of utility usage, billing and payments. It provides benefits like reduced costs, disputes and risks for the company as well as more transparency, payment options and usage monitoring for customers. Several clients have implemented solutions successfully.
Semi-Real Time Inclinometer readings using Wireless Technologies
This document describes a new method for taking semi-real time inclinometer readings using wireless technologies. The current practice of downloading data from inclinometers to a PC on site and then transporting the PC back to the office takes over 13 hours for readings from 10 boreholes. The new method uses a battery-powered device with Bluetooth to transmit readings from the inclinometer to a worker's mobile phone. The data is then sent via GPRS to a central server where it is automatically processed, plotted, and emailed to stakeholders, taking only 70 minutes total. This provides an 11-fold improvement in throughput time and allows stakeholders to immediately discuss unexpected readings and monitor critical sites more safely and effectively. Feedback from users has been
PID - Temperature Controller
This document discusses PID (proportional-integral-derivative) control and feedback control systems. It describes how feedback loops work using a microphone and speaker system as an example. It then discusses different types of PID controllers including those with relay, current, and voltage outputs. The document outlines various control modes like on-off control, manual control, basic PID control, and ramp/soak control. It also mentions PID alarms. The goal is to control systems using feedback to achieve the desired output.
M.e paper.ppt new (1)
This document presents a project on 3 element control of a boiler system using a programmable logic controller (PLC), proportional-integral-derivative (PID) controller, and supervisory control and data acquisition (SCADA) interface. The proposed system aims to overcome limitations of previous control systems by automating control of parameters like temperature, pressure, and water level using various sensors connected to a PLC. The PLC is configured to control actuators based on input from sensors and PID logic. A SCADA interface is used to monitor parameters. Experimental results showed the system could effectively control water level and pressure based on defined setpoints and alarm thresholds.
The design and implementation of remote real time monitor system for embedded...
for btech, mtech, ece, eee , projecs on domains embedded, matlab, vlsi, image processing, signal processing, communication,fpga please contact @src embedded solution
web:www.srcembedded.com
mail:srcembedded@gmail.com
ph: 8297 313 858
Chinmay pandya
This document provides an overview of programmable logic controllers (PLCs) and automation. It discusses that PLCs were introduced in 1968 to automate industrial processes. A PLC uses sensors as inputs to monitor conditions and uses programming to automate outputs that control machines. Common sensors described are for pressure, temperature, light, humidity, and water level. PLC programming is done using ladder logic and other languages. Supervisory control and data acquisition (SCADA) systems are also discussed, which allow monitoring and controlling automated processes from a central location. The document outlines several applications of PLCs and notes their advantages in increasing consistency, accuracy, and production while reducing labor costs and accidents. Disadvantages include high initial costs
Project ppt
This document summarizes a student project to design a highly secured automatic door control and power control system. The system uses a PIC microcontroller to control components like a PIR sensor for motion detection, door sensors, call buttons, relays for light/fan control, and a GSM modem for communication. It allows for automated and remote control of doors and electric appliances with features like gas leakage detection for security. The project aims to provide low-cost security and automation for homes and offices with benefits like remote access and power savings. Future work may include expanding the gas detection and power control capabilities.
YSI aquaculture monitoring & control w24 02 0712
The YSI aquaculture monitoring and control instrumentation measures water quality continuously to allow for complete control of water quality in aquaculture facilities or aquariums.
More Related Content
What's hot
Centralized Cooling System1
The document summarizes a proposal for a centralized monitored cooling system for a Dubai project. It includes:
- Details on the refrigeration units and compressors needed, with a total cooling capacity requirement of 84kW.
- Descriptions of the physical systems including vibration isolation, electrical boards meeting standards, and refrigeration pipes made of copper.
- An overview of the electronic monitoring system which allows remote control and monitoring of parameters, alarms, and historical data filing for maintenance.
- An 18-month warranty on refrigeration plant parts, excluding some damages and wear items.
A brief about building management system
A Building Management System is a computer-based control system that is installed in the buildings in order to control and monitor the mechanical and electrical equipment of the building including lighting, fire systems, ventilation, security systems etc.
1314 datasheet 0
The Innova 1314 Photoacoustic Monitor is a highly accurate and reliable system for quantitatively monitoring gas concentrations. It uses photoacoustic infrared detection to measure up to five gases and water vapor with detection limits in the ppb range. The monitor compensates for environmental factors to ensure accurate measurements and performs self-tests to ensure reliability. It has easy-to-use interfaces and requires minimal maintenance, needing recalibration only one to two times per year.
TemperatureRecorder
The document outlines a temperature recorder project for Varian Medical Systems that involves connecting to multiple temperature sensors placed throughout a factory to record and log temperatures to a database on an ongoing basis. It will monitor temperatures and send alert notifications if any temperatures fall outside a preset range, as well as sending weekly status emails. Screenshots are included showing the proposed home screen, temperature graph, and message log interfaces.
Office automation system front
This document is a project report for an office automation system created by Md. Ashfaqul Haque. The system uses various sensors and components like Arduino, servo motor, flame sensor, RFID, PIR motion sensor and LCD to automate door opening/closing, fire detection, light control and more. It aims to create a safe and energy efficient automated office environment. The report describes the components used, circuit operation with block and schematic diagrams, and advantages like energy savings. It concludes the system achieves its goals of automating the office while increasing safety and efficiency.
VOICE CALL AND SMS CALL ALERT SYSTEM FOR MONITORING TEMPERATURE, HUMIDITY, WA...
The system works with SIM card and has a battery backup for 48 hours. The system will make phone calls and SMS to 8 operators and will deliver a voice message and SMS indicating the type of failure occurred. The phone calls will be made until the problem is rectified (This can be
Programmed to set a delay) In case of power failure, an SMS will be sent immediately. All programming can be done by sending SMS One authorized person can activate or deactivate the device by sending SMS
B. S. K. Technologies, Secunderabad, Humidity Meters
Suppliers and Exporter of professional Test and Measuring Instruments such as Humidity Meters, Hygro Meter BSK Technologies, Thermo Hygro Meters, Thermo Meters, Temperature Meter, Infra thermo meters, Temperature Meters, Temperature Indicator, Infra Red Thermometer, Temperature Data Loggers, A Datalogger Low Cost Model, Humidity Logger, Temperature Data Logger, A Digital Flow meters, Environment Meters, Transmitters.
Equilab al 204 aluminum metal analyzer
The AL-204 has been specially designed to quickly and accurately determine the concentration of aluminium in slags. Via the analysis of the gases resulting from the attack to the sample with Sodium Hydroxide (NaOH) you can quickly obtain – in just ten minutes – and accurately – a precision of >99% - the percentage of aluminium contained in the sample.
Development of on line monitoring system of substation power equipment based ...
The document proposes developing an online monitoring system for substation power equipment based on the IEEE1588 standard. This system would use a PIC microcontroller to sense temperature, current and voltage from sensors, store the data in EEPROM, and upload it to the internet via Ethernet. By implementing precise time synchronization between master and slave clocks over Ethernet using IEEE1588, the system allows real-time remote monitoring of substation status from anywhere.
4byte2fg
This document describes a home system that controls and communicates with various home devices and appliances. It consists of a settop box that runs a scriptable software core to manage queues, process data and activate signals to influence connected devices. A patented junction box hardware allows control of all home consumers via standard communication. The system provides energy consumption data, peripheral data and maintenance reminders while controlling temperature, lighting, shutters and more through an event-driven software interface.
Technician Training: Safety basics
This document provides an overview of safety basics for technician training, including general safety, electrical safety, mechanical safety, and preventing spills and overfills. It outlines key safety requirements such as following detailed lockout/tagout procedures, checking that equipment is de-energized before working on it, making sure piping and tanks are properly isolated and drained before work, wearing appropriate protective equipment, attending safety meetings, and being aware of electrical area classifications and their implications. Compliance with comprehensive jobsite safety programs is critical.
POSTER PRESENTATION ZARIF 2016
This document describes a student project to design and implement a wireless sensor system for monitoring temperature and humidity in a greenhouse growing Typhonium Flagelliforme plants. Sensor circuits using a DHT11 temperature and humidity sensor and an ESP8266 WiFi module were developed to acquire environmental data and transmit it to a website for monitoring. The sensors were installed in a greenhouse and successfully measured and transmitted the temperature and humidity levels to improve control of the greenhouse conditions and reduce human error in management.
Temperature Control System Using Pid Controller
This document describes a temperature control system using a PID controller. It includes a block diagram and overall circuit diagram of the system. The system works by using a temperature sensor to provide feedback on the current temperature, which is compared to the setpoint temperature and used by the PID controller to regulate a heating element or fan to maintain the desired temperature. The document also discusses the PID tuning methods, applications of microcontrollers in temperature control, and concludes the system is able to accurately sense and maintain temperature using an LM35 temperature sensor and PIC16F873A microcontroller.
Wireless irrigation System
This is a wireless irrigation control system including main controller, pump controller and valve controller. Main controller is to connect with your Hunter/Toro irrigation unit. Pump controller is to connect with the main pump, when there is valve on, pump will be on. Valve controller is to connect each solenoid valve, when Hunter asked the valve ON, related valve will be ON
IoT Smart System Technology 2020
This document discusses an IoT smart utility system solution for a private utility company. It aims to address problems with manual meter reading, business processes, usage control and billing, and customer complaints. The solution involves implementing an end-to-end IoT solution using devices, gateways, networks and applications to connect smart meters and sensors. This allows for automated remote monitoring of utility usage, billing and payments. It provides benefits like reduced costs, disputes and risks for the company as well as more transparency, payment options and usage monitoring for customers. Several clients have implemented solutions successfully.
Semi-Real Time Inclinometer readings using Wireless Technologies
This document describes a new method for taking semi-real time inclinometer readings using wireless technologies. The current practice of downloading data from inclinometers to a PC on site and then transporting the PC back to the office takes over 13 hours for readings from 10 boreholes. The new method uses a battery-powered device with Bluetooth to transmit readings from the inclinometer to a worker's mobile phone. The data is then sent via GPRS to a central server where it is automatically processed, plotted, and emailed to stakeholders, taking only 70 minutes total. This provides an 11-fold improvement in throughput time and allows stakeholders to immediately discuss unexpected readings and monitor critical sites more safely and effectively. Feedback from users has been
PID - Temperature Controller
This document discusses PID (proportional-integral-derivative) control and feedback control systems. It describes how feedback loops work using a microphone and speaker system as an example. It then discusses different types of PID controllers including those with relay, current, and voltage outputs. The document outlines various control modes like on-off control, manual control, basic PID control, and ramp/soak control. It also mentions PID alarms. The goal is to control systems using feedback to achieve the desired output.
M.e paper.ppt new (1)
This document presents a project on 3 element control of a boiler system using a programmable logic controller (PLC), proportional-integral-derivative (PID) controller, and supervisory control and data acquisition (SCADA) interface. The proposed system aims to overcome limitations of previous control systems by automating control of parameters like temperature, pressure, and water level using various sensors connected to a PLC. The PLC is configured to control actuators based on input from sensors and PID logic. A SCADA interface is used to monitor parameters. Experimental results showed the system could effectively control water level and pressure based on defined setpoints and alarm thresholds.
The design and implementation of remote real time monitor system for embedded...
for btech, mtech, ece, eee , projecs on domains embedded, matlab, vlsi, image processing, signal processing, communication,fpga please contact @src embedded solution
web:www.srcembedded.com
mail:srcembedded@gmail.com
ph: 8297 313 858
Chinmay pandya
This document provides an overview of programmable logic controllers (PLCs) and automation. It discusses that PLCs were introduced in 1968 to automate industrial processes. A PLC uses sensors as inputs to monitor conditions and uses programming to automate outputs that control machines. Common sensors described are for pressure, temperature, light, humidity, and water level. PLC programming is done using ladder logic and other languages. Supervisory control and data acquisition (SCADA) systems are also discussed, which allow monitoring and controlling automated processes from a central location. The document outlines several applications of PLCs and notes their advantages in increasing consistency, accuracy, and production while reducing labor costs and accidents. Disadvantages include high initial costs
What's hot (20)
VOICE CALL AND SMS CALL ALERT SYSTEM FOR MONITORING TEMPERATURE, HUMIDITY, WA...
VOICE CALL AND SMS CALL ALERT SYSTEM FOR MONITORING TEMPERATURE, HUMIDITY, WA...
B. S. K. Technologies, Secunderabad, Humidity Meters
B. S. K. Technologies, Secunderabad, Humidity Meters
Development of on line monitoring system of substation power equipment based ...
Development of on line monitoring system of substation power equipment based ...
Semi-Real Time Inclinometer readings using Wireless Technologies
Semi-Real Time Inclinometer readings using Wireless Technologies
The design and implementation of remote real time monitor system for embedded...
The design and implementation of remote real time monitor system for embedded...
Viewers also liked
Project ppt
This document summarizes a student project to design a highly secured automatic door control and power control system. The system uses a PIC microcontroller to control components like a PIR sensor for motion detection, door sensors, call buttons, relays for light/fan control, and a GSM modem for communication. It allows for automated and remote control of doors and electric appliances with features like gas leakage detection for security. The project aims to provide low-cost security and automation for homes and offices with benefits like remote access and power savings. Future work may include expanding the gas detection and power control capabilities.
YSI aquaculture monitoring & control w24 02 0712
The YSI aquaculture monitoring and control instrumentation measures water quality continuously to allow for complete control of water quality in aquaculture facilities or aquariums.
Building automation-energy-efficiency
The document summarizes a case study on building automation for a new office building in Rome, Italy. It presents the building specifications, energy usage breakdown for lighting and HVAC systems, and an overview of the EN 15232 standard for evaluating the impact of building automation and controls on energy performance. The standard defines efficiency classes for building automation and control systems (BACS) and criteria for assigning classes based on control functions. It also describes the calculation procedure for determining the BACS efficiency factor to quantify potential energy savings.
Shiv smart door ppt
This document presents a smart door system that uses a passive infrared (PIR) sensor to automatically open and close doors. The system includes a microcontroller, PIR sensor, relay driver, voltage regulator, relay, and other components. When a person is detected near the door by the PIR sensor, the microcontroller signals the relay driver to open the door. The door automatically closes after a set time delay if no further movement is detected. Automatic doors provide benefits for disabled individuals and help improve safety and efficiency in places like hospitals, warehouses, and commercial buildings.
Design of alarm using pir sensor for
An alarm device or system of alarm devices gives an audible, visual or other form of alarm signal about a problem or condition. Alarm devices are often outfitted with a siren.
Alarms in an operation and maintenance (O&M) monitoring system, which informs the bad working state of (a particular part of) the system under monitoring. First-out alarm safety alarms, which go off if a dangerous condition occurs.
Human Detection Robot
The advent of new high-speed technology and the growing computer capacity provided realistic opportunity for new robot controls and realization of new methods of control theory. This technical improvement together with the need for high performance robots created faster, more accurate and more intelligent robots using new robots control devices, new drives and advanced control algorithms. This Project deals with live personal detection robot is based on 8 bit Microcontroller. This Robot follows which is drawn over the surface. Here we are using PIR sensor for detect the which are detect human. The project is mainly used in the DEBRIS for Earth quake rescue. Internally it consists of IR sensors. The infrared sensors are used to sense the live persons. All the above systems are controlled by the Microcontroller. In our project we are using the popular 8 bit microcontroller. The Microcontroller is used to control the motors. It gets the signals from the PIR sensors and it drives the motors according to the sensor inputs. Two DC Garemotors are used to drive the robot.
Pir based lighting control
This project presentation summarizes the design and development of a PIR-based lighting control system. The system uses a PIR sensor to detect motion and trigger lights. When no motion is detected, the lights will turn off to save energy. PIR sensors detect infrared radiation emitted from surrounding objects and can be used to control lights in areas that only require occasional illumination, such as pathways, driveways, and gardens. The presentation provides details on PIR sensor components and working, the application circuit design including a power supply, sensor interface, microcontroller, and relay to control lights. It explains how the system can be used to automatically turn lights on when motion is detected and off again after a period of inactivity to provide energy-
Pir sensor based security alarm system using um 3561 (2)
This document describes a PIR sensor-based security alarm system that uses a PIR sensor and UM3561 siren IC. The system detects infrared radiation emitted from humans using a PIR sensor and triggers the UM3561 IC to produce an alarm siren. It uses low-power, inexpensive components like a PIR sensor, UM3561 siren IC, transistors, resistors, speaker and battery. When the PIR sensor detects human infrared radiation within its 5m range, it sends a signal to the UM3561 IC to generate an alarm siren through the speaker. This provides a low-cost solution for security and other applications.
Home Automation Using RPI
This document discusses the Raspberry Pi single board computer. It provides details on the Raspberry Pi's specifications including its ARM processor, RAM, and Linux operating system. It describes possible uses for Raspberry Pi like home servers, web servers, and prototyping. The document outlines how to set up networking, install Java, and deploy web applications to a Raspberry Pi remotely. It also covers connecting hardware like reading analog sensors and controlling devices with digital outputs.
Energy saving using pir sensor
This document describes an energy saving project using a PIR sensor. The project aims to automatically turn lights and fans on when motion is detected and off when no motion is present, saving energy. The main components are a PIR sensor to detect motion, a microcontroller, an LDR sensor to detect light levels, dimmers to control light brightness, and an LCD display to show the system status. When motion is detected, the lights and fans turn on. When no motion is detected, the lights and fans automatically turn off. This helps save energy by avoiding wasted power when a space is unoccupied.
Monitoring & Controlling of Devices using GSM
This document describes a system to remotely monitor and control devices using GSM technology. The system uses a microcontroller to receive SMS commands from a mobile phone via a GSM modem and control devices connected to relays. It allows devices like fans and lamps to be turned on and off from a distance. The system provides advantages like remote control from anywhere using basic phone operation and potential applications in home, office, and industrial automation.
Automatic Wireless Health Monitoring System In Hospitals For Patients
This ppt provides the abstract of a wireless system used for remote patients monitoring in hospitals using microcontroller.
GSM BASED DEVICES CONTROL SYSTEM PROJECT REPORT
The document is a project report for an SMS based device control system using GSM technology. It was submitted by 5 students for their Bachelor of Technology degree. The project involved designing a printed circuit board to control devices remotely via SMS using a GSM modem and microcontroller. The report describes the equipment used, including the GSM modem, microcontroller, LCD display, relays, and driver IC. It also covers the PCB design and layout, programming code, working of the system, advantages and applications.
Home automation & security system
The Home Automation & Security system is a basic model created using Arduino, Raspberry Pi and Relays to Automate the house. It is very basic in nature and is completed as a part of my internship project
Final Year Project Presentation
The document compares the cost of designing a building using different structural systems, including a dual system without beams, building frame system with beams, and other options. It finds that the dual system without beams has the lowest total cost at $80 million, while the most expensive is the moment resisting system with beams at $120 million. Charts and tables show the cost breakdown by structural element and comparisons of total costs for each system.
Final Year Project
This project presents an overhead bridge electromagnetic crane that can automatically measure and place objects on a conveyor belt based on their length and height. The crane uses sensors to detect objects, a microcontroller to process the measurements and control the electromagnet and motors, and can operate either automatically or manually via joystick. It is intended to help automate material handling in industries like shipping, steel mills, and petroleum refineries.
Automatic Light Control using LDR and PIR Sensor
The main purpose of designing this project is to prevent loss of current unnecessarily during day time.
During night the bulb will automatically glow .
COMPONENTS REQUIRED :
RELAY
LIGHT EMITTING DIODE (LED)
LIGHT DEPENDENT RESISTOR (LDR)
PASSIVE INFRARED SENSOR (PIR)
RESISTOR (1k ohm)
DIODE
TRANSISTOR (BC547)
BATTERY (POWER SOURCE)
Final Year Project Presentation
The document describes a final year project to develop a mobile and web application called SpringsVision Events for planning and managing social events. A team of 4 students - Syed Absar Karim, Umair Ahmed, Shafaq Yameen, and Zaid Hussain - presented their project to create an online platform for scheduling events, adding social networking features, and mobile support to the supervisor Mr. Nadeem Mahmood. The project aims to provide a useful tool for personal event management and sharing on social media.
RF Based Hoome Security System
This document describes an RF-based home security system consisting of various sensors, an encoder, transmitter, receiver, and decoder. The system detects intruders via PIR, gas, fire, and light sensors and transmits encoded signals to a receiver using a 433MHz RF transmitter. When the receiver detects intruder signals, it triggers an alarm to alert users and can activate additional security systems through a relay switch. The wireless system provides an affordable way to monitor a home and deter crime without wires.
Ppt
This document describes a remote home security system using a wireless sensor network and GSM technology. The system aims to detect theft, gas leaks, and temperature changes and send alarm messages remotely. It uses an ARM or AT89S52 controller, GSM module, smoke sensor, LPG sensor, temperature/PIR sensor, infrared sensor, LCD, and MAX232 IC. The system's block diagram shows sensors connecting to an embedded controller that communicates via GSM to authorized mobile phones. It allows monitoring a home security system remotely.
Viewers also liked (20)
Pir sensor based security alarm system using um 3561 (2)
Pir sensor based security alarm system using um 3561 (2)
Automatic Wireless Health Monitoring System In Hospitals For Patients
Automatic Wireless Health Monitoring System In Hospitals For Patients
Similar to HOME AUTOMATION CUM BUILDING SECUIRITY SYSTEM ELECTRONICS PROJECT
Atm Monitoring & Control System
Provide with uninterrupted ATM services at the optimum cost, and lead to increased Customer satisfaction & increased profitability.
Smart Home Automation - An Overview
Luxury home automation wasn’t a face of everyday life. Today it is, though gradually! Directly controlling and seamlessly staying connected with the home systems you use every day via a mobile device would significantly enhance your quality of life. It is not only about remotely controlling the lights, AC, fan, audio systems, curtains, television, kitchen appliances, garage doors, sprinklers from your smartphone from anywhere. Again it is not merely about regularly monitoring the security of your home and your kids from your workplace miles away. It is all about convenience and safety. It is about exploiting the latest of what technology has on offer. It is about saving energy significantly and contributing to the creation of a greener earth through use of energy efficient systems. A smart home offers all of these – comfort, convenience, monetary savings, and safety. Smart Automation has emerged as a reliable and leading service provider in this segment.
Presentation
This document describes the development of a microcontroller-based temperature control system for educational purposes. The system uses a temperature sensor to measure the temperature and a microcontroller to implement ON/OFF and PID control algorithms to control a fan and maintain the temperature at a set point. The PID controller provided better control with a smoother, non-oscillating response compared to the ON/OFF controller. The temperature control system can be used by students to learn practical applications of control engineering concepts.
ScadaProject.com
ScadaProject is an automation company that provides industrial control system design, implementation, and support services. They have over 100 years of combined experience working with leading automation vendors on projects in various industries. Their services include consulting, system design, programming, installation, training, and remote support. They currently employ 12 specialists and have worked on projects ranging from small SCADA systems to large turnkey solutions.
11901621030_Digital control System_Priyashree Nandi.pdf
A digital controller receives input signals measuring properties like impedance, compares the actual values to targets, and sends control signals to adjust components accordingly. It works by measuring the actual state of a device, comparing it to the target state, and taking action to stop or allow heating as needed. Digital controllers offer advantages like flexibility, inexpensive implementation using microcontrollers, and resistance to environmental impacts compared to analog controllers. They are commonly used in industrial heating systems to stably control temperature within safety limits.
Elitech Controls HVAC refrigeration company overview
This document provides information about Elitech, a Chinese company that produces intelligent instruments and tools, as well as automation equipment for cold chain monitoring and control. It discusses Elitech's product lines, customers, certifications, research and development processes, honors received, and new factory project. Elitech aims to become a global leader in the Internet of Things industry for cold chain through innovation in science and technology.
Servotech overview
Three case studies are summarized:
1. A company saved thousands of pounds by having an obsolete digital engine management unit reverse engineered and its components replaced.
2. A wiring harness for a gas engine was replaced within three days after being destroyed in a fire, compared to a two week delivery time from the OEM.
3. A power supply failure taking six gas engines offline for five days was collected, repaired, and returned within 24 hours, restoring the engines to operation.
ABC of BMS.pdf
A Building Management System (BMS) is a blend of hardware and software that is used to control and monitor a building's mechanical, electrical, and other systems. It collects operating information to analyze building systems and present the data visually. A BMS can automate control strategies, allow remote monitoring and control of equipment, maintain operational records, and alert operators to conditions outside normal ranges. BMS protocols include BACnet and Lonworks. System architecture may involve different tiers with controllers connected to an HMI or to each other in a daisy chain configuration. BMS software handles functions like alarms, energy management, maintenance records, control logic, and historical data storage. A typical BMS includes controllers, field devices, integration
TPMS- Theft Prevention Management System
Shroti Telecom Pvt. Ltd. is an ISO-certified Indian company established in 2012 that provides energy and security management solutions for the telecommunications industry. It has developed products like the Theft Prevention Management System and Intelligent Alarm Monitoring System to remotely monitor sites and generate alarms. The company has a presence across 22 Indian states and over 300 employees working in R&D, operations, field services, and commercial roles. It aims to provide innovative, integrated, and cost-effective solutions with a focus on quality and 100% Made in India products.
Home automation
This document presents a home automation project that aims to develop a home automation system controlled by an Android application. The project was completed by Ayan Mondal for their diploma in ECE. The objectives are to create a centralized wireless control system for a smart home. A feasibility study found the technical risks to be moderate and related to security and software. The total estimated cost is Rs. 1,207. The system will use an Android app, BLYNK, and IFTTT for remote control of lights, appliances, and security through a Node MCU and relays. Future applications could include refrigerator communication and home robotics.
Empowered surveillance
This document describes portable, battery-powered video security systems manufactured by RSI Video Technologies. It provides details on their MotionViewer system, which uses motion sensors and night vision to detect intruders and send video clips to monitoring stations. The document outlines the system components, specifications, and applications. It highlights the system's ability to enhance security for commercial and industrial facilities, construction sites, vacant buildings, and more without wires or AC power connections.
HygroNet presentation - ChemDry
The HygroNet and HygroNetSoLo are remote monitoring systems that measure temperature and humidity at water damaged properties to track the drying process. The HygroNet uses a base station and wireless sensors while the HygroNetSoLo uses a single battery-powered unit. Data from the systems provides visibility into the drying process, allows for targeted drying procedures, and helps minimize costs by optimizing equipment usage and site visits.
HygroNet Presentation - ChemDry
The HygroNet and HygroNetSoLo are remote monitoring systems that measure temperature and humidity at water damaged properties to track the drying process. The HygroNet uses a base station and wireless sensors while the HygroNetSoLo uses a single battery-powered unit. Data from the systems provides visibility into the drying process, allows for targeted drying procedures, and helps minimize costs by optimizing equipment usage and site management.
ECU_Mechatronics_Presentation_Ready.ppt
This document provides an overview of mechatronics and discusses several mechatronics applications. Mechatronics is defined as the integration of mechanical engineering, electronics, and intelligent digital control in the design of smart products and processes. The document then discusses sensors, actuators, control systems, and feedback control. It provides examples of mechatronics applications in areas like robotics, automotive systems, manufacturing, medical devices, sanitation, smart homes, and more.
Autoclaves Steam Sterilizer WAC-80 Daihan
The document describes an autoclave steam sterilizer called the WAC-80 Daihan. It has a top-loading design for easy loading of large volumes, digital fuzzy controller, LCD display, and safety features like over-temperature, over-pressure, and over-current protection. It has a capacity of 80 liters, operates at temperatures up to 132°C, and includes two wire baskets.
Alcohol monitoring scram iid fuel cell devices 2015
This document provides information about ignition interlock devices (IIDs) and mobile alcohol monitoring. It defines IIDs, describes how they work and their components. It discusses the purpose of IIDs, specifications for common models, anti-circumvention features, installation, and the 2013 NHTSA standards. Reporting features of IID management software are summarized. Terminology used in IID logs is defined. The document also introduces mobile alcohol monitoring as a less intrusive alternative to SCRAM, describing its basic functioning and potential advantages.
Alcohol monitoring scram iid fuel cell devices 2015
This document provides information about ignition interlock devices (IIDs) and mobile alcohol monitoring. It defines IIDs, describes how they work and their components. It discusses the purpose of IIDs, specifications for common models, anti-circumvention features, installation, and the 2013 NHTSA standards. Reporting features of IID management software are summarized. Terminology used in IID logs is defined. The document also introduces mobile alcohol monitoring as a less intrusive alternative to SCRAM, describing its basic functioning and potential advantages.
Thermohook: tool for parabolic trough collectors maintenance.
This tool enhances parabolic trough collectors maintenance Solar Thermal Electricity plants, measuring, at the same time the temperature of the outer and inner tube.
Similar to HOME AUTOMATION CUM BUILDING SECUIRITY SYSTEM ELECTRONICS PROJECT (18)
11901621030_Digital control System_Priyashree Nandi.pdf
11901621030_Digital control System_Priyashree Nandi.pdf
Elitech Controls HVAC refrigeration company overview
Elitech Controls HVAC refrigeration company overview
Alcohol monitoring scram iid fuel cell devices 2015
Alcohol monitoring scram iid fuel cell devices 2015
Alcohol monitoring scram iid fuel cell devices 2015
Alcohol monitoring scram iid fuel cell devices 2015
Thermohook: tool for parabolic trough collectors maintenance.
Thermohook: tool for parabolic trough collectors maintenance.
Recently uploaded
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneChapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Recently uploaded (20)
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
HOME AUTOMATION CUM BUILDING SECUIRITY SYSTEM ELECTRONICS PROJECT
- 1. CPTC,Trivandrum Home Security cum Automation System Work Presented by eldhose Guided by
- 2. CPTC,Trivandrum HSAS Home Security Home Automation Intruder Detection Camera Monitoring Water Pump Control Garden Watering System Lighting Control Electronic Siren Door Breaking Monitor Telephone Dialer Alms. Indicator Basic Blocks of Home Security cum Automation System
- 3. Home Security cum Automation Sy The Project is divided into two major section Home Automation Home Security
- 4. Home Security cum Automation Sy Home Automation i. Water Pump control ii. Garden watering iii. ON & OFF Certain Porch lights on pre defined timings iv. 24 Hr. Clock Home Security i. Intruder Detection from four side (East,West,South and North) ii. A camera rotates 360 degree to monitor entire boundary iii. Door breaking detection iv. Electronic siren v. Telephone dialer for a stored number (additional future planed)
- 5. Home Security cum Automation Sy Features of Pump control i. Over head tank water level – Low(25%) and High(100%) ii. Pond water level – Low and Normal iii. Voltage level – Low(180) and High(240) iv. Time delay
- 7. Home Security cum Automation Sy The Heart of our Project is a micro controller AT89C51 Features • Compatible with MCS-51™ Products • 4K Bytes of In-System Reprogrammable Flash Memory – Endurance: 1,000 Write/Erase Cycles • Fully Static Operation: 0 Hz to 24 MHz • Three-Level Program Memory Lock • 128 x 8-Bit Internal RAM • 32 Programmable I/O Lines • Two 16-Bit Timer/Counters • Six Interrupt Sources • Programmable Serial Channel • Low Power Idle and Power Down Modes