High Range Pressure Switches DT Series
•
0 likes•17 views
DT series pressure switches have a cast aluminum enclosure and are recommended for panel or line mounted hydraulic and pneumatic applications. They have a repeat accuracy better than ±2% FSR and connect via a DIN 43650 electrical connector. Ranges include 1-10 bar and 2-15 bar, with maximum working pressures up to 15 bar. They can switch currents up to 15A and are used in high pressure power packs, presses, aerospace, and defense applications. The ordering code specifies the model, range, microswitch type, wetted parts, and optional protective lock.
Report
Share
Report
Share
Download to read offline
Recommended
Hydraulic Range Pressure Switch DT Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
Hydraulic range Pressure Switches DN series
DT hydraulic pressure switches have a cast aluminum enclosure and are recommended for panel or line mounted hydraulic applications. They have a repeat accuracy better than ±2% FSR and connect via a DIN 43650 electrical connector. A variety of pressure ranges, electrical ratings, and wetted part materials are available. Customers should specify the full model number when ordering to avoid ambiguity.
Vfd l m-en_20030522
This document provides instructions for installing and operating a Variable Frequency Drive (VFD) motor controller. It describes receiving and inspecting the unit, installation requirements including wiring diagrams, switch settings for operation modes and parameters, and communication protocols for remote control via RS-485. Safety guidelines and technical specifications are also included to ensure proper use of the device.
CN Series Solid State Relay
The document introduces CN Series Solid State Relays and DRACN assemblies. It provides an overview of key features of CN Series SSRs, including that they are designed for socket or PCB mounting and offer performance and reliability. It lists target applications such as medical equipment and industrial automation. It also describes DRACN Series Assemblies which combine CN series SSRs and sockets in ready to use configurations.
Ls catalog thiet bi tu dong ss7 e_110530_dienhathe.vn
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Specifying VCXOs (Voltage Controlled Crystal Oscillators)
This document specifies parameters for voltage-controlled crystal oscillators (VCXOs). It describes key specifications like frequency, frequency stability over operating temperature range, frequency pullability with voltage control, and operating temperature range. It also covers additional details like packaging, outline drawings, and ordering information. VCXOs provide a stable output waveform that can be tuned via an analog voltage to precisely control oscillator frequency.
Bellow operated Paddle type Flow Switch with Triclamp T Fitting Series WFSPT
Bellow operated Paddle type Flow Switch with Triclamp T Fitting Series WFSPTNK Instruments Pvt. Ltd.
WFSPT -General purpose
WP-FSPT -Weatherproof Flow Switches
EP-FSPT -Explosion proof Flow Switches to group IIA/IIB
GFP-FSPT -Flameproof Flow Switches to group IIC
WPFS -10R & WPFS-15R -Low Flow Paddle type Flow Switches
MFSPT -Magnetic Repulsion type Flow Switches
AFSPT -Air Flow Switches
AFSPT -Mini Air Flow Switches
Service : Liquids, Slurries, Air and Gases
Mounting : On Vertical or Horizontal Mounted pipe line
Line Size : For any pipe line size above 1/2"
Flow set point : Prefixed or, Field Adjustable
Paddle Material : SS
Sealing type : With SS Bellow or, without Bellow
Switch type : SPDT Micro switch (5A or, 15 A)
Repeatability : Better than +/- 1%
Accuracy : +/-2.0 %
Max. Working Pressure : 10 bar
Max. Working Temperature : 100 degree CPlasma Etch / RIE AW-901eR AW-903eR
The AW-901eR & AW-903eR single-wafer dry etchers are automated tools designed as a flexible 13.56MHz RF Parallel Plate plasma etching systems for high-volume wafer fabrication. AW-901eR & AW-903eR are in direct response to manufacturer’s concerns for wafer breakage, Uniformity, Uptime, Reliability, and Production-Proven technology
Recommended
Hydraulic Range Pressure Switch DT Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
Hydraulic range Pressure Switches DN series
DT hydraulic pressure switches have a cast aluminum enclosure and are recommended for panel or line mounted hydraulic applications. They have a repeat accuracy better than ±2% FSR and connect via a DIN 43650 electrical connector. A variety of pressure ranges, electrical ratings, and wetted part materials are available. Customers should specify the full model number when ordering to avoid ambiguity.
Vfd l m-en_20030522
This document provides instructions for installing and operating a Variable Frequency Drive (VFD) motor controller. It describes receiving and inspecting the unit, installation requirements including wiring diagrams, switch settings for operation modes and parameters, and communication protocols for remote control via RS-485. Safety guidelines and technical specifications are also included to ensure proper use of the device.
CN Series Solid State Relay
The document introduces CN Series Solid State Relays and DRACN assemblies. It provides an overview of key features of CN Series SSRs, including that they are designed for socket or PCB mounting and offer performance and reliability. It lists target applications such as medical equipment and industrial automation. It also describes DRACN Series Assemblies which combine CN series SSRs and sockets in ready to use configurations.
Ls catalog thiet bi tu dong ss7 e_110530_dienhathe.vn
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Specifying VCXOs (Voltage Controlled Crystal Oscillators)
This document specifies parameters for voltage-controlled crystal oscillators (VCXOs). It describes key specifications like frequency, frequency stability over operating temperature range, frequency pullability with voltage control, and operating temperature range. It also covers additional details like packaging, outline drawings, and ordering information. VCXOs provide a stable output waveform that can be tuned via an analog voltage to precisely control oscillator frequency.
Bellow operated Paddle type Flow Switch with Triclamp T Fitting Series WFSPT
Bellow operated Paddle type Flow Switch with Triclamp T Fitting Series WFSPTNK Instruments Pvt. Ltd.
WFSPT -General purpose
WP-FSPT -Weatherproof Flow Switches
EP-FSPT -Explosion proof Flow Switches to group IIA/IIB
GFP-FSPT -Flameproof Flow Switches to group IIC
WPFS -10R & WPFS-15R -Low Flow Paddle type Flow Switches
MFSPT -Magnetic Repulsion type Flow Switches
AFSPT -Air Flow Switches
AFSPT -Mini Air Flow Switches
Service : Liquids, Slurries, Air and Gases
Mounting : On Vertical or Horizontal Mounted pipe line
Line Size : For any pipe line size above 1/2"
Flow set point : Prefixed or, Field Adjustable
Paddle Material : SS
Sealing type : With SS Bellow or, without Bellow
Switch type : SPDT Micro switch (5A or, 15 A)
Repeatability : Better than +/- 1%
Accuracy : +/-2.0 %
Max. Working Pressure : 10 bar
Max. Working Temperature : 100 degree CPlasma Etch / RIE AW-901eR AW-903eR
The AW-901eR & AW-903eR single-wafer dry etchers are automated tools designed as a flexible 13.56MHz RF Parallel Plate plasma etching systems for high-volume wafer fabrication. AW-901eR & AW-903eR are in direct response to manufacturer’s concerns for wafer breakage, Uniformity, Uptime, Reliability, and Production-Proven technology
4188 855 mac
This document summarizes the manual call point (MCP) products that are compatible with Gent analogue addressable fire alarm systems. It includes MCP models with glass or resettable elements, as well as optional protective covers and surface back boxes. Instructions are provided on assembly, installation, testing and resetting the MCPs.
Sicop datasheet
The document provides information on Siemens 3TH30 contactor relays:
1) 3TH30 contactor relays are air break contactors suitable for 10A at 240V AC and 10A at 24V DC that provide reliability and safety in control circuits.
2) They have flexible configurations with up to 8 contacts and mounting options.
3) Features include double break parallel bridge contacts, captive screws, and lugless terminations for improved safety and ease of use.
Datasheet foxboro eckardt srd991 18463765
The SRD991 intelligent positioner can operate pneumatic valve actuators and is available with different communication protocols or without communication. It features auto-start calibration, self-diagnostics, a multi-lingual LCD interface, and optional pressure sensors and input/output modules. Accessories include manifolds, boosters, and mounting kits to interface with various actuator types.
Tps3306 18 (1)
The TPS3306 family is a series of dual supervisory circuits that monitor two independent supply voltages for DSP and processor-based systems. They monitor supply voltages like 3.3V/1.5V, 3.3V/1.8V, or 3.3V/2.5V. The circuits assert a reset signal when supply voltages drop below threshold levels and include a watchdog timer and power-fail comparator. They are available in 8-pin packages and operate over a temperature range of -40°C to 85°C.
MT Low Range Pressure Switches Supplier in India
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
Impulse valve
The document provides information on the Impulse Valve Operator (IVO) kit, which electrically or manually activates a Fike impulse valve to release clean agent from a container.
The IVO can be activated electrically via a signal from a Fike control panel or manually via a red strike button. An Impulse Releasing Module supervises the agent release circuit wiring.
Specifications include a 24VDC normal supply voltage and stainless steel/brass materials. Installation instructions describe connecting the IVO to the valve and control panel wiring. Reset instructions explain retracting the firing pin.
Limitorque WG Series Installation, Operation, and Maintenance
The Flowserve Limitorque WG series of worm gearboxes is designed for quarter-turn butterfly, ball, and plug valve applications as well as quarter-turn and multi-turn dampers and offers unsurpassed quality and longevity in a wide variety of weatherproof, submersible and buried-service applications.
Ed3 & ed4 sm installation & calibration v101
The document provides installation and calibration instructions for the ED3 & ED4-SM SkidWeigh Plus on-board check weighing system. It describes how to install the pressure transducer and digital indicator, make electrical connections, perform a quick test, calibrate the system by lifting empty and loaded forks, and set up an overload warning. The system weighs loads by measuring hydraulic pressure when forks are lifted and provides the operator with load weight readings.
Limitorque QX Electronic Actuator User Instructions
The Flowserve Limitorque QX quarter-turn smart electronic valve actuator continues the legacy of the industry’s state-of-the-art, non-intrusive, multi-turn MX actuator by including an absolute encoder for tracking position without the use of troublesome batteries. The QX design provides enhanced safety and reduced downtime through improved diagnostics, built-in self-test (BIST) features and LimiGard™ fault protection.
The QX design builds on more than 10 years of experience with proven Limitorque MX technology - the first generation double-sealed electronic valve actuator from Flowserve designed to provide control, ease of use and accuracy. The QX includes all the user-preferred features of the MX in a quarter-turn smart actuator package. It is the only non-intrusive, double-sealed quarter-turn actuator to display the Limitorque brand.
TC end High Range Pressure Switches MG Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
Siemens Contactors LP
This document provides pricing information for Siemens LV Switchgear motor control products, including contactor relays, power contactors, overload relays, circuit breakers and other devices. It lists product codes, descriptions, unit prices and standard packaging quantities for various sizes and configurations. Key products mentioned include contactor relays, power contactors, overload relays, motor protection circuit breakers and soft starters. The price list is effective from October 1st, 2014.
312742 ds
This document describes the TPS31xx family of ultra-low supply current/voltage supervisory circuits. The circuits provide power on reset and voltage monitoring functions for systems powered from 0.9V to 3.3V. They have precision voltage thresholds as low as 0.9V, supply currents of 1.2uA, and reset outputs that can be open drain or push pull. The devices monitor the supply voltage and provide a reset output if the voltage drops below the threshold. They are available in a small SOT-23 package and are suitable for use in low power applications.
Advanced motion controls s30a8
The document describes the S30A series of three-phase brushless servo amplifiers manufactured by Electromate. The amplifiers are small surface-mount devices that provide sinusoidal drive and current control to three-phase brushless motors. They require two sinusoidal command signals with 120 degree phase shift for external commutation and control motor torque based on signal amplitude. The amplifiers protect the motor from over-voltage, under-voltage, over-current, over-heating and short-circuits.
Advanced motion controls s25a20
The document describes the S30A series of three-phase brushless servo amplifiers manufactured by Electromate. The amplifiers are small surface-mount devices that provide sinusoidal drive and current control to three-phase brushless motors. They require two sinusoidal command signals with 120 degree phase shift for external commutation and control motor torque based on signal amplitude. The amplifiers protect the motor from over-voltage, under-voltage, over-current, over-heating and short-circuits.
Dm74 ls164
Dm74 ls164LITS IT Ltd,LASRC.SPACE,SAWDAGOR BD,FREELANCE BD,iREV,BD LAW ACADEMY,SMART AVI,HEA,HFSAC LTD.
This document provides information on the DM74LS164 8-Bit Serial In/Parallel Out Shift Register integrated circuit from Fairchild Semiconductor. It has gated serial inputs, asynchronous clear, fully buffered clock and inputs, and can operate at clock frequencies up to 36 MHz while dissipating around 80 mW of power. The device is available in either a 14-pin Small Outline Integrated Circuit package or a 14-pin Plastic Dual-In-Line package. Electrical characteristics, switching characteristics, and physical dimension drawings are also included.thông số kĩ thuật siemens contactor 3 tf2
thông số kĩ thuật siemens contactor 3 tf2Công ty cổ phần OKS | Tổng thầu thi công Nhà máy GMP, Tổng thầu thi công Nhà kho GSP
This document provides an overview and selection guide for 3RT, 3TB, and 3TF contactors for switching motors. It describes the contactors' suitability for AC and DC operation under IEC 60947 standards in any climate. Tables list contactor types, rated currents, motor power ratings, auxiliary contact configurations, order numbers, and prices for contactors with various terminal types (screw, plug, solder) and mounting options (rail, diagonal). Notes sections provide information on rated control supply voltages.Dienhathe.com monitoring devices
The document discusses various monitoring devices from Siemens, including:
- 5TT3 46 fault signaling units that monitor fault alarms and signals with centralized fault displays.
- 7LQ2 1 and 5TT3 3 dusk switches that switch lighting installations based on daylight levels to save energy.
- Monitoring devices like fuse monitors, voltage and current relays, insulation monitors, and level and motor protection relays that monitor various electrical parameters.
VR-8 step voltage regulator
The document provides information on the VR-8 single phase voltage regulator from Farady Electric. It describes the regulator as a tap-changing autotransformer that can regulate distribution line voltages from 10% higher to 10% lower in 32 steps. It lists available voltage ratings from 2400V to 34500V for 50Hz and 60Hz systems. It also outlines standard features such as an SEL control box, tap changer motor, potential indicator, nameplates, and mounting provisions. Optional accessories and two controller box options - the SEL-2431 and ICMI UVR-1 - are also summarized.
Flameproof High Range Pressure Switches with Scale FC series
Flameproof Pressure Switches are designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Various Ranges : from 0 to 150 mm Wc upto 0 to 400 Bar
Differential (Dead Band) : Fixed (Within 10% of set value) Or, Adjustable
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316) or Piston
Enclosure : Flameproof to group IIC
Welded reduced tip socket weld end thermowell
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
Highproof High Range Pressure Switches Mz Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
High Range Pressure Switches MD Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
More Related Content
What's hot
4188 855 mac
This document summarizes the manual call point (MCP) products that are compatible with Gent analogue addressable fire alarm systems. It includes MCP models with glass or resettable elements, as well as optional protective covers and surface back boxes. Instructions are provided on assembly, installation, testing and resetting the MCPs.
Sicop datasheet
The document provides information on Siemens 3TH30 contactor relays:
1) 3TH30 contactor relays are air break contactors suitable for 10A at 240V AC and 10A at 24V DC that provide reliability and safety in control circuits.
2) They have flexible configurations with up to 8 contacts and mounting options.
3) Features include double break parallel bridge contacts, captive screws, and lugless terminations for improved safety and ease of use.
Datasheet foxboro eckardt srd991 18463765
The SRD991 intelligent positioner can operate pneumatic valve actuators and is available with different communication protocols or without communication. It features auto-start calibration, self-diagnostics, a multi-lingual LCD interface, and optional pressure sensors and input/output modules. Accessories include manifolds, boosters, and mounting kits to interface with various actuator types.
Tps3306 18 (1)
The TPS3306 family is a series of dual supervisory circuits that monitor two independent supply voltages for DSP and processor-based systems. They monitor supply voltages like 3.3V/1.5V, 3.3V/1.8V, or 3.3V/2.5V. The circuits assert a reset signal when supply voltages drop below threshold levels and include a watchdog timer and power-fail comparator. They are available in 8-pin packages and operate over a temperature range of -40°C to 85°C.
MT Low Range Pressure Switches Supplier in India
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
Impulse valve
The document provides information on the Impulse Valve Operator (IVO) kit, which electrically or manually activates a Fike impulse valve to release clean agent from a container.
The IVO can be activated electrically via a signal from a Fike control panel or manually via a red strike button. An Impulse Releasing Module supervises the agent release circuit wiring.
Specifications include a 24VDC normal supply voltage and stainless steel/brass materials. Installation instructions describe connecting the IVO to the valve and control panel wiring. Reset instructions explain retracting the firing pin.
Limitorque WG Series Installation, Operation, and Maintenance
The Flowserve Limitorque WG series of worm gearboxes is designed for quarter-turn butterfly, ball, and plug valve applications as well as quarter-turn and multi-turn dampers and offers unsurpassed quality and longevity in a wide variety of weatherproof, submersible and buried-service applications.
Ed3 & ed4 sm installation & calibration v101
The document provides installation and calibration instructions for the ED3 & ED4-SM SkidWeigh Plus on-board check weighing system. It describes how to install the pressure transducer and digital indicator, make electrical connections, perform a quick test, calibrate the system by lifting empty and loaded forks, and set up an overload warning. The system weighs loads by measuring hydraulic pressure when forks are lifted and provides the operator with load weight readings.
Limitorque QX Electronic Actuator User Instructions
The Flowserve Limitorque QX quarter-turn smart electronic valve actuator continues the legacy of the industry’s state-of-the-art, non-intrusive, multi-turn MX actuator by including an absolute encoder for tracking position without the use of troublesome batteries. The QX design provides enhanced safety and reduced downtime through improved diagnostics, built-in self-test (BIST) features and LimiGard™ fault protection.
The QX design builds on more than 10 years of experience with proven Limitorque MX technology - the first generation double-sealed electronic valve actuator from Flowserve designed to provide control, ease of use and accuracy. The QX includes all the user-preferred features of the MX in a quarter-turn smart actuator package. It is the only non-intrusive, double-sealed quarter-turn actuator to display the Limitorque brand.
TC end High Range Pressure Switches MG Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
Siemens Contactors LP
This document provides pricing information for Siemens LV Switchgear motor control products, including contactor relays, power contactors, overload relays, circuit breakers and other devices. It lists product codes, descriptions, unit prices and standard packaging quantities for various sizes and configurations. Key products mentioned include contactor relays, power contactors, overload relays, motor protection circuit breakers and soft starters. The price list is effective from October 1st, 2014.
312742 ds
This document describes the TPS31xx family of ultra-low supply current/voltage supervisory circuits. The circuits provide power on reset and voltage monitoring functions for systems powered from 0.9V to 3.3V. They have precision voltage thresholds as low as 0.9V, supply currents of 1.2uA, and reset outputs that can be open drain or push pull. The devices monitor the supply voltage and provide a reset output if the voltage drops below the threshold. They are available in a small SOT-23 package and are suitable for use in low power applications.
Advanced motion controls s30a8
The document describes the S30A series of three-phase brushless servo amplifiers manufactured by Electromate. The amplifiers are small surface-mount devices that provide sinusoidal drive and current control to three-phase brushless motors. They require two sinusoidal command signals with 120 degree phase shift for external commutation and control motor torque based on signal amplitude. The amplifiers protect the motor from over-voltage, under-voltage, over-current, over-heating and short-circuits.
Advanced motion controls s25a20
The document describes the S30A series of three-phase brushless servo amplifiers manufactured by Electromate. The amplifiers are small surface-mount devices that provide sinusoidal drive and current control to three-phase brushless motors. They require two sinusoidal command signals with 120 degree phase shift for external commutation and control motor torque based on signal amplitude. The amplifiers protect the motor from over-voltage, under-voltage, over-current, over-heating and short-circuits.
Dm74 ls164
Dm74 ls164LITS IT Ltd,LASRC.SPACE,SAWDAGOR BD,FREELANCE BD,iREV,BD LAW ACADEMY,SMART AVI,HEA,HFSAC LTD.
This document provides information on the DM74LS164 8-Bit Serial In/Parallel Out Shift Register integrated circuit from Fairchild Semiconductor. It has gated serial inputs, asynchronous clear, fully buffered clock and inputs, and can operate at clock frequencies up to 36 MHz while dissipating around 80 mW of power. The device is available in either a 14-pin Small Outline Integrated Circuit package or a 14-pin Plastic Dual-In-Line package. Electrical characteristics, switching characteristics, and physical dimension drawings are also included.thông số kĩ thuật siemens contactor 3 tf2
thông số kĩ thuật siemens contactor 3 tf2Công ty cổ phần OKS | Tổng thầu thi công Nhà máy GMP, Tổng thầu thi công Nhà kho GSP
This document provides an overview and selection guide for 3RT, 3TB, and 3TF contactors for switching motors. It describes the contactors' suitability for AC and DC operation under IEC 60947 standards in any climate. Tables list contactor types, rated currents, motor power ratings, auxiliary contact configurations, order numbers, and prices for contactors with various terminal types (screw, plug, solder) and mounting options (rail, diagonal). Notes sections provide information on rated control supply voltages.Dienhathe.com monitoring devices
The document discusses various monitoring devices from Siemens, including:
- 5TT3 46 fault signaling units that monitor fault alarms and signals with centralized fault displays.
- 7LQ2 1 and 5TT3 3 dusk switches that switch lighting installations based on daylight levels to save energy.
- Monitoring devices like fuse monitors, voltage and current relays, insulation monitors, and level and motor protection relays that monitor various electrical parameters.
VR-8 step voltage regulator
The document provides information on the VR-8 single phase voltage regulator from Farady Electric. It describes the regulator as a tap-changing autotransformer that can regulate distribution line voltages from 10% higher to 10% lower in 32 steps. It lists available voltage ratings from 2400V to 34500V for 50Hz and 60Hz systems. It also outlines standard features such as an SEL control box, tap changer motor, potential indicator, nameplates, and mounting provisions. Optional accessories and two controller box options - the SEL-2431 and ICMI UVR-1 - are also summarized.
What's hot (18)
Limitorque WG Series Installation, Operation, and Maintenance
Limitorque WG Series Installation, Operation, and Maintenance
Limitorque QX Electronic Actuator User Instructions
Limitorque QX Electronic Actuator User Instructions
Viewers also liked
Flameproof High Range Pressure Switches with Scale FC series
Flameproof Pressure Switches are designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Various Ranges : from 0 to 150 mm Wc upto 0 to 400 Bar
Differential (Dead Band) : Fixed (Within 10% of set value) Or, Adjustable
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316) or Piston
Enclosure : Flameproof to group IIC
Welded reduced tip socket weld end thermowell
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
Highproof High Range Pressure Switches Mz Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
High Range Pressure Switches MD Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
Flameproof High Range Bellow type Pressure Switches FC series
Flameproof Pressure Switches are designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Various Ranges : from 0 to 150 mm Wc upto 0 to 400 Bar
Differential (Dead Band) : Fixed (Within 10% of set value) Or, Adjustable
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316) or Piston
Enclosure : Flameproof to group IIC
Bar Stock Compact Threaded End Thermowell
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
High Range Pressure Switches MG Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
Welded sanitary connect thermowell
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
Flameproof Flanged Pressure Switches FC series
Flameproof Pressure Switches are designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Various Ranges : from 0 to 150 mm Wc upto 0 to 400 Bar
Differential (Dead Band) : Fixed (Within 10% of set value) Or, Adjustable
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316) or Piston
Enclosure : Flameproof to group IIC
Bar stock with lag threaded end thermowell
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
Welded sanitary weld in thermowell
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
Flameproof Low Range Pressure Switches FC series
Flameproof Pressure Switches are designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Various Ranges : from 0 to 150 mm Wc upto 0 to 400 Bar
Differential (Dead Band) : Fixed (Within 10% of set value) Or, Adjustable
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316) or Piston
Enclosure : Flameproof to group IIC
Bar Stock Sanitary Weld in Thermowell
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
Flanged end Pressure Switches MZ Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
High Range Pressure Switches SA Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
High Range Pressure Switches MN Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
Welded reduced tip sanitary connect thermowell
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
High Range Pressure Switches Ez Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
High Range Pressure Switch Mz series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
Bar stock weld in thermowell
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
Viewers also liked (20)
Flameproof High Range Pressure Switches with Scale FC series
Flameproof High Range Pressure Switches with Scale FC series
Flameproof High Range Bellow type Pressure Switches FC series
Flameproof High Range Bellow type Pressure Switches FC series
Similar to High Range Pressure Switches DT Series
High range DP Switch PD series
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
Flameproof Highproof Low Range DP Switch FC Series
We have Orion brand DP Switches. The DP Switches are also known as PD Switches, Differential Pressure Switches, Pressure Difference Switches.
Flameproof Low Range DP Switches FC series
We have Orion brand DP Switches. The DP Switches are also known as PD Switches, Differential Pressure Switches, Pressure Difference Switches.
Catalog PX5R IDEC - www.haophuong.com
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
Sw low pressure
This document provides information on the 20 and 25 Series Pressure SWICHGAGE®, which are combination indicating gauges and limit switches. They have a dial gauge to indicate pressure and built-in electrical switches that can trigger alarms or shut downs when the pressure reaches an adjustable limit. The gauges come in various pressure ranges and models with different switch configurations. They are designed to monitor systems like engine lubrication pressure to protect equipment.
Hydraulic Range Pressure Switches HM Series
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
High range DP Switch DP series
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
Flameproof Ultra Low range DP Switches series FP
This document provides information on FP Ultra Low Range Pressure Difference Switches. The switches have a user adjustable knob to set the switching point in pascals without needing a pressure gauge. They have an IP66 rated die cast aluminum housing and can withstand up to 10 million switching operations. The switches have operating ranges from 20 to 4000 pascals and can be used with air or non-aggressive gases at temperatures up to 80°C. Installation instructions are also provided.
transmitter
The document summarizes the specifications of the EJA120E differential pressure transmitter from Yokogawa Electric Corporation. It provides details on the transmitter's measurement range of 0.1 to 1 kPa, accuracy of ±0.2% of span or better, 4-20mA output, digital communication protocols, wetted materials including silicone oil, housing materials, and certifications including SIL 2. The transmitter is suitable for measuring flow, level, density and pressure using its single crystal silicon resonant sensor.
PLC: Slimline PCB Relay PCN(H)
This document provides specifications for TE Connectivity's slimline PCN and PCNH series general purpose low power PCB relays. The PCN relay has a 1 pole 5A normally open contact, operates at 120mW, and is only 5mm wide, allowing for high packing density. The PCNH has a single contact and higher performance 180mW coil. Both comply with RoHS and offer cadmium-free contacts. The document provides detailed contact, coil, insulation, mechanical, and other technical data for the relays.
Advanced motion controls az6a8
The AZ6A8 analog servo drive is designed to drive DC motors from a single power supply. It has a peak current of 6A, continuous current of 3A, and operates from 20-80VDC. The drive provides protection from overloads and faults, and interfaces with digital controllers using analog +/-10V signals. It is intended for direct mounting on PCBs.
Advanced motion controls bdc30a8
The document describes the Analog Servo Drive BDC30A8. It is designed to drive brushless DC motors with a peak current of 30A and continuous current of 15A. It has inputs for PWM, direction and inhibits. It is fully protected against overloads and short circuits. It is compliant with safety and EMC standards including UL, CE and RoHS.
Advanced motion controls azxb25a8
The document describes an analog servo drive that is designed to drive brushless and brushed DC motors. It can provide up to 25 amps of peak current and 12.5 amps of continuous current. It has protections against overvoltage, undervoltage, overcurrent and other faults. It is designed for direct integration into PCBs and has a compact size and wide operating temperature range.
Advanced motion controls sx30a8
The SX30A8 analog servo drive:
- Is designed to drive 3-phase brushless motors with sinusoidal current control. It requires two 120° phase shifted sine wave command signals.
- Has a peak current of 30A and continuous current of 15A RMS. It operates from a 20-80VDC power supply.
- Provides optical isolation, regenerative braking, adjustable current limits, and fault protection. Status is indicated by an LED and digital outputs.
Advanced motion controls s60a40
The S60A40 PWM servo drive is designed to drive 3-phase brushless motors with sinusoidal current. It interfaces with digital controllers and requires 2 sinusoidal command signals with 120° phase shift for motor commutation. The drive is fully protected and requires only a single DC power supply. It provides optical isolation between high and low power signals.
Advanced motion controls s60a8
The S60A8 analog servo drive is designed to drive 3-phase brushless motors with sinusoidal current. It requires 2 sinusoidal command signals 120 degrees out of phase to control motor position and torque. The drive interfaces with digital controllers, has overvoltage, overcurrent, and overheating protections, and operates from a single DC power supply. It provides optical isolation between high and low power signals.
Advanced motion controls s100a8
The S100A8 analog servo drive is designed to drive 3-phase brushless motors with sinusoidal current. It interfaces with digital controllers and requires 2 sinusoidal command signals 120 degrees out of phase. It has protection against overvoltage, overcurrent, and short circuits. Key features include optical isolation, regenerative braking, adjustable current limits, and a high switching frequency.
Advanced motion controls avb125a200
This document provides specifications for the M/VTM Series Servo Drive AVB125A200. It is designed to drive brushless DC motors for vehicle applications with a peak current of 125A and continuous current of 80A. It accepts analog and potentiometer command inputs and feedback from Hall sensors, encoders, or tachometers. Modes of operation include current, voltage, velocity control and more which are selected using onboard DIP switches and potentiometers.
Pressure-Control-Brochure
This document provides product information for Argus Pressure Switches, Isolation Valves, and related pressure control products. It summarizes the products' specifications, certifications, materials, dimensions, and applications. The products conform to various industry standards and are designed for reliable and safe pressure monitoring and control in oil and gas well sites and other industrial processes.
Advanced motion controls azxbdc25a8
The document provides specifications for the Analog Servo Drive AZXBDC25A8, which is designed to drive brushless and brushed DC motors. It can deliver up to 25A of peak current and 12.5A of continuous current from a 10-80V DC power supply. The drive has overcurrent, overvoltage, and thermal protection. It interfaces with digital controllers using PWM and direction inputs and includes status and current monitoring outputs.
Similar to High Range Pressure Switches DT Series (20)
Flameproof Highproof Low Range DP Switch FC Series
Flameproof Highproof Low Range DP Switch FC Series
More from NK Instruments Pvt. Ltd.
Vibrating fork Level Switches Aqua fork Swift Supplier and Manufacturer in In...
Vibrating fork Level Switches Aqua fork Swift Supplier and Manufacturer in In...NK Instruments Pvt. Ltd.
Vibrating Fork type Level Switches are single point level switches. Vibrating Fork type Level Switches are also known as Tuning Fork Level Switches. The electronics control unit is integral with the sensing probe. Fail safe logic is field selectable.
There ate two type of Vibraing Fork Level Switches - Vibraing Fork for Solids
Vibrating Fork for Low Density material & Liquids
Housing : Cast Aluminium Weatherproof
Mains : : 230 V AC, 110 V AC or, 24 V DC
Output : : 2 set of C/O contacts rated at 5 amps, 230 V AC for resistive loads.
or. PNP NO
Switching Delay: : 2 sec to 20 Sec ( adj.) for probe covered and uncovered (OPTIONAL)MT Low Range DP Switches Supplier in India
We have Diaphragm type Differential Pressure Switches. These gauges are more in demand for DP control applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Control applications in pressurized tanks,
Ranges : from 0 to 150 mm WC up to 0 to 7 bar
Differential : Fixed
Accuracy : +/- 1% FS
Temperature Range : -10 to 80 Degree C (for high-temperature use of impulse tube is advisable)
Migration : Impossible
No. of Switches : One or, Two.
Type of Switches : Micro Switches - SPDT, 5 A 250 V AC
Enclosure class : IP 54, IP 65, IP 66 or, Flameproof
Pressure Housing : MS or, SS
Sensing Diaphragm : Neoprene or, Teflon
Process Connection : ¼” BSP-F (Standard)
MT Large Bore High Range Pressure Switches Supplier in India
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
MT Hydraulic Range Pressure Switches Supplier in India
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
MT High Proof High Range Pressure Switches Supplier in India
NK Instruments Pvt. Ltd. has 2 SPDT type Pressure Switches also. Those are used when 2 contacts are to be used at a time when switch operates. We have DJ & MJ series switches with Adjustable Stage Differential Switches and MK & DK series switches are available with 2 SPDT Fixed Stage Differential Switches. These switches are available in Weatherproof model IP 54 & IP 65. We also have 2 SPDT Flameproof Pressure Switches.
MT Flanged Pressure Switches Supplier in India
"NK Instruments Pvt. Ltd. has 2 SPDT type Pressure Switches also. Those are used when 2 contacts are to be used at a time when switch operates. We have DJ & MJ series switches with Adjustable Stage Differential Switches and MK & DK series switches are available with 2 SPDT Fixed Stage Differential Switches. These switches are available in Weatherproof model IP 54 & IP 65. We also have 2 SPDT Flameproof Pressure Switches.
MT Dual Pressure switches
Various Pressure Ranges : from 0 to 1 Bar up to 0 to 400 Bar
Stage Difference (Dead Band between two switches) : Fixed Stage Differential or, Adjustable Stage Differential
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : Two nos.
Type of Switches : Micro Switches - 2 SPDT (5A 250 V AC or, 0.2 A 250 V DC.)
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316:L) OR, Piston
Enclosure : Weatherproof (IP 54), Weatherproof (IP 65), Weatherproof (IP 66), Flameproof
Pressure Housing : Aluminium, Brass, SS 316 or, special on request
Process Connection : ¼” BSP (F) or, special on request
MT Hydraulic Diaphragm Pressure Switches Supplier in India
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
High Range Pressure Switch KU Series
General information:
KU series pressure switches are housed in pressed steel
powder coated enclosure and are recommended for
panel mounting or indoor service. The repeat accuracy is
better than +/-1.5 % FSR, Pressure port is 1/4” BSPM
standard.
Features:
Compact
SS316 & Teflon as standard wetted parts
Electrical Rating : 15A, 125/250 VAC
Pressure port : 1/4” BSPM
Range Selection Table
Model + Range Bar (psi)
0.5 - 7.0
(7.25 - 101.50)
1.0 - 15.0
(14.5 - 217.5)
5.0 - 25.0
(72.5 - 362.5)
*Adjustable Differential bar (psi)
1.2 –
Flameproof High Range Pressure Switches FE Series
Flameproof Pressure Switches are designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Various Ranges : from 0 to 150 mm Wc upto 0 to 400 Bar
Differential (Dead Band) : Fixed (Within 10% of set value) Or, Adjustable
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316) or Piston
Enclosure : Flameproof to group IIC
Dp Transmitter Smart Series
We have Smart type DP Transmitters with magnetic key. These Smart Differential Pressure Transmitters are available in wide range from Absolute till 1000 bar in IP 67 enclosure. SMART DP Transmitters has LCD display for local indication for measured DP value.
Vibration meter | Vibration sensors | Transducers Vibration Sensors
Vibration Switches are used to keep a watch on Vibrations in the industrial application. For excessive Vibrations this switch operates. Vibration is a Safety Switch. We have FFE make Vibration Switches, which works on Acceleration. We have Flameproof Vibration Switches and Weatherproof Vibration Switches. We have Manual reset Vibration Switches and Remote Reset Vibration Switches also.
www.vibrationinstruments.net
Level Sensors | Level Gauges | Level Indicators, Thane, Mumbai, Maharashtra, ...
Level Sensors | Level Gauges | Level Indicators, Thane, Mumbai, Maharashtra, ...NK Instruments Pvt. Ltd.
Level Measuring instruments are like Mechanical Level gauges, Digital Level Indicators, Level Transmitters & Level Switches. We have Float type Level Switches, Conductivity Level Switches, RF Admittance Level Switches, Vibrating Fork Level Switches, Rotating Paddle Level Switches, Capacitance Level Switches. In Level Gauges we have Tubular Level Gauges, Reflex Level Gauges, Bi-color Level Gauges, Follower Pointer Level Gauges. We also have Magnetic Flow Level Transmitters, Capacitance Level Transmitters, Submersible Level Transmitters, Ultrasonic Level Transmitters and Radar Level Transmitters.Vibration Switch with Remote Reset
Series 3171-MR are Vibration Switches with options as Manual Reset type and Remote Reset type .
Enclosure : Sealed Ingress Protection to IP 67 to BS EN60947-1 or,
Ingress Protection IP 67 to BS 5420
Set level range : 1 to 9g Peak (Horizontal Vibrations)
Contacts : Silver or, Gold
Mounting : Fix to vertical face with Reset Button at bottom.
NOTE : ac solenoids normally continuously rated
dc solenoids intermittent 25% rated i.e. (1 min. ON & 3 mins OFF)
Electrical Reset : Solenoid rating 48 watts maximum intermittent rating
Solenoid voltages 110, 240 ac or 24 dc
Vibration Switch with Manual Reset
Series 3171-MR are Vibration Switches with options as Manual Reset type and Remote Reset type .
Enclosure : Sealed Ingress Protection to IP 67 to BS EN60947-1 or,
Ingress Protection IP 67 to BS 5420
Set level range : 1 to 9g Peak (Horizontal Vibrations)
Contacts : Silver or, Gold
Mounting : Fix to vertical face with Reset Button at bottom.
NOTE : ac solenoids normally continuously rated
dc solenoids intermittent 25% rated i.e. (1 min. ON & 3 mins OFF)
Electrical Reset : Solenoid rating 48 watts maximum intermittent rating
Solenoid voltages 110, 240 ac or 24 dc
Vacuum Transmitter
Vacuum Transmitter senses the Vacuum in the process and gives the output in current or, voltage in proportion to the change in Vacuum.
Indication : without
Output options : 4 to 20 mA, 0 to 10 Vdc, 1 to 5 Vdc or, 0.5 to 4.5 V dc under 5 V dc
Accuracy : +/- 0.25%, 0.5% or, 1% of FS
Enclosure type : IP 65, IP 67, IP 68, Exproof
Zero and Span Adjustment : With or, Without
Process connection options : 1/4" BSP threaded end
Ranges : various ranges from 0 to 760 mm Hg
Max. pressure : Full Vacuum up to 2 bar pressure
Operating Temperature: 0 to 60 degree C
Flameproof Vacuum Switch series FC
Flameproof Vacuum Switch is designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
Vacuum Switch MZ Series
Varieties of Vacuum Switches are available on the basis of the Enclosure like IP 54, IP 54, IP 65 or, IP 66
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
Vacuum Switch MN Series
Varieties of Vacuum Switches are available on the basis of the Enclosure like IP 54, IP 54, IP 65 or, IP 66
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
Vacuum Switch MD Series
Varieties of Vacuum Switches are available on the basis of the Enclosure like IP 54, IP 54, IP 65 or, IP 66
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
More from NK Instruments Pvt. Ltd. (20)
Vibrating fork Level Switches Aqua fork Swift Supplier and Manufacturer in In...
Vibrating fork Level Switches Aqua fork Swift Supplier and Manufacturer in In...
MT Large Bore High Range Pressure Switches Supplier in India
MT Large Bore High Range Pressure Switches Supplier in India
MT Hydraulic Range Pressure Switches Supplier in India
MT Hydraulic Range Pressure Switches Supplier in India
MT High Proof High Range Pressure Switches Supplier in India
MT High Proof High Range Pressure Switches Supplier in India
MT Hydraulic Diaphragm Pressure Switches Supplier in India
MT Hydraulic Diaphragm Pressure Switches Supplier in India
Vibration meter | Vibration sensors | Transducers Vibration Sensors
Vibration meter | Vibration sensors | Transducers Vibration Sensors
Level Sensors | Level Gauges | Level Indicators, Thane, Mumbai, Maharashtra, ...
Level Sensors | Level Gauges | Level Indicators, Thane, Mumbai, Maharashtra, ...
Recently uploaded
Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Top mailing list providers in the USA.pptx
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Part 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Understanding User Needs and Satisfying Them
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Income Tax exemption for Start up : Section 80 IAC
A presentation on the concept of Exemption of Profits of Start ups from Income Tax
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-inspired to the data-driven praxis (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
CALL 8867766396 SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA | DPBOSS GUESSING | TARA MATKA | KALYAN CHART | MATKA BOSS
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership at Agile Tour Geneve 2024
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Recently uploaded (20)
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Income Tax exemption for Start up : Section 80 IAC
Income Tax exemption for Start up : Section 80 IAC
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
LA HUG - Video Testimonials with Chynna Morgan - June 2024
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership Agile Tour Geneve 2024
High Range Pressure Switches DT Series
- 1. DT HIGH RANGE PRESSURE SWITCH
- 2. DT General informa on: DT series pressure switches have a cast aluminum enclosure (IP54) and are recommended for panel / line mounted hydraulic / pneuma c applica ons. The repeat accuracy is be er than ±2 % FSR. An electrical connector to DIN 43650 is provided for wiring. Pressure port is ¼ " BSPF standard. Features: · Robust construc on · 15 A switching possible (op onal) Panel moun ng · Protec ve lock to avoid tampering (op onal) · Electrical ra ng : 5A,250VAC;0.2A,250VDC(RES.) (op onally 15 A, 250 VA C) Some Applica ons : Used in high pressure power packs, press applica on, space and defence, etc. Range Selec on Table Range Code Range (rising pressure) bar (psi) *Approximate Maximum Differential bar (psi) Maximum Working Pressure bar (psi) 10 1 - 10 (14.50 - 145.04) 1 (14.50) 15 (217.71) 15 2 - 15 (29.00 - 217.71) 2 (29.00) 15 (217.71) *differential rises with setpoint (Graphs available on request) How to order DT high range pressure switches. Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Model Range Code Microswitch Wetted Parts Protective Lock DT - High Range Pressure Switch Please select as per range code table C -rated at 5A, 250 VAC (res.) H -rated at 15A, 250 VAC (res.) S -Standard U -without any lock P -with a protective lock Reserved for non standard modifications. Code will be given by company eg. A hydraulic pressure switch, pressure range from 1 to 10 bar, with a standard 5 A,250 VAC microswitch, standard wetted parts and a protective lock shall be specified by Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 DT 10 C S P - Please specify full model number to avoid ambiguity. If only the first two groups are specified while ordering, pressure switches without a protective lock & with standard wetted parts will be supplied. HIGH RANGE PRESSURE SWITCH NK Instruments Pvt. Ltd.B-501/504, 5th floor, Raunak Arcade, Near THC Hospital, Gokhale Road, Naupada, Thane(W) 400602. Maharashtra INDIA Telefax Nos.: 91-22-25301330 / 31 / 32 E-Mail: sales@nkinstruments.com Web: http://www.nkinstruments.com Skype: nitinkelkarskype Gtalk: nkinstruments2006 Authorised Dealer