SlideShare a Scribd company logo
Analog Servo Drive AZXB25A8 
Description 
Power Range 
The AZXB25A8 PWM servo drive is designed to drive brushless and brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is designed for direct integration into your PCB. The AZXB30A8 is fully protected against over-voltage, under-voltage, over-current, over- heating and short-circuits. A single digital output indicates operating status. The drive interfaces with digital controllers that have analog ±10V output. This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS (Reduction of Hazardous Substances) compliant. 
The AZXB25A8 conforms to the following specifications and is designed to the Environmental Engineering Considerations as defined in MIL-STD-810F. 
Extended Environment Performance 
Ambient Temperature 
-40°C to +85°C (-40°F to +185°F) 
Storage Temperature 
-50°C to +100°C (-58°F to +212°F) 
Thermal Shock 
-40°C to +85°C (-40°F to +185°F) in 2 min. 
Relative Humidity 
0 to 95% Non-Condensing 
Vibration 
30 Grms for 5 min. in 3 axes 
See Part Numbering Information on last page of datasheet for additional ordering options. 
Peak Current 25 A 
Continuous Current 12.5 A 
Supply Voltage 10 - 80 VDC 
Features 
 High Power Density 
 Compact Size 
 Direct Board-to-Board Integration 
 Lightweight 
 High Switching Frequency 
 Four Quadrant Regenerative Operation 
 Wide Temperature Range 
 High Performance Thermal Dissipation 
 Differential Input Command 
 Current Monitor Output 
 Digital Fault Output Monitor 
 12VDC Operation 
HARDWARE PROTECTION 
 Over-Voltage 
 Under-Voltage 
 Over-Current 
 Over-Temperature 
 Short-circuit (phase-phase) 
 Short-circuit (phase-ground) 
INPUTS/OUTPUTS 
 Digital Fault Output 
 Digital Inhibit Input 
 Analog Current Monitor 
 Analog Command Input 
 Analog Current Reference 
FEEDBACK SUPPORTED 
 Hall Sensors 
MODES OF OPERATION 
 Current 
COMMUTATION 
 Trapezoidal 
MOTORS SUPPORTED 
 Three Phase (Brushless) 
 Single Phase (Brushed, Voice Coil, Inductive Load) 
COMMAND SOURCE 
 ±10 V Analog 
COMPLIANCES & AGENCY APPROVALS 
 UL 
 cUL 
 CE Class A (LVD) 
 CE Class A (EMC) 
 RoHS 
 MIL-STD-810F (as stated) 
 MIL-STD-1275D (optional) 
 MIL-STD-461E (optional) 
 MIL-STD-704F (optional) 
 MIL-HDBK-217 (optional) 
ELECTROMATE 
Toll Free Phone (877) SERVO98 
Toll Free Fax (877) SERV099 
www.electromate.com 
sales@electromate.com 
Sold & Serviced By:
Analog Servo Drive AZXB25A8 
BLOCK DIAGRAM 
Information on Approvals and Compliances 
US and Canadian safety compliance with UL 508c, the industrial standard for power conversion electronics. UL registered under file number E140173. Note that machine components compliant with UL are considered UL registered as opposed to UL listed as would be the case for commercial products. 
Compliant with European CE for both the Class A EMC Directive 2004/108/EC on Electromagnetic Compatibility (specifically EN 61000-6-4:2007 and EN 61000-6-2:2005) and LVD requirements of directive 2006/95/EC (specifically EN 60204-1:2006), a low voltage directive to protect users from electrical shock. 
MIL-STD-810F 
Environmental Engineering Considerations and Laboratory Tests – (as stated) 
MIL-STD-1275D 
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles – (optional) 
MIL-STD-461E 
Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment – (optional) 
MIL-STD-704F 
Aircraft Electric Power Characteristics – (optional) 
MIL-HDBK-217 
Reliability Prediction of Electronic Equipment (MTBF) – (optional) 
RoHS (Reduction of Hazardous Substances) is intended to prevent hazardous substances such as lead from being manufactured in electrical and electronic equipment. – (optional) 
ELECTROMATE 
Toll Free Phone (877) SERVO98 
Toll Free Fax (877) SERV099 
www.electromate.com 
sales@electromate.com 
Sold & Serviced By:
Analog Servo Drive AZXB25A8 
SPECIFICATIONS 
Power Specifications 
Description 
Units 
Value 
DC Supply Voltage Range 
VDC 
10 - 80 
DC Bus Under Voltage Limit 
VDC 
9 
DC Bus Over Voltage Limit 
VDC 
88 
Maximum Peak Output Current1 
A 
25 
Maximum Continuous Output Current 
A 
12.5 
Maximum Continuous Output Power 
W 
950 
Maximum Power Dissipation at Continuous Current 
W 
50 
Minimum Load Inductance (Line-To-Line)2 
μH 
100 
Internal Bus Capacitance3 
μF 
30 
Low Voltage Supply Outputs 
- 
+6 VDC (30 mA) 
Switching Frequency 
kHz 
31 
Control Specifications 
Description 
Units 
Value 
Command Sources 
- 
±10 V Analog 
Feedback Supported 
- 
Halls 
Commutation Methods 
- 
Trapezoidal 
Modes of Operation 
- 
Current 
Motors Supported 
- 
Three Phase (Brushless), Single Phase (Brushed, Voice Coil, Inductive Load) 
Hardware Protection 
- 
Invalid Commutation Feedback, Over Current, Over Temperature, Over Voltage, Under Voltage, Short Circuit (Phase-Phase & Phase-Ground) 
Mechanical Specifications 
Description 
Units 
Value 
Agency Approvals 
- 
UL, cUL, CE Class A (EMC), CE Class A (LVD), RoHS, MIL-STD-810F (as stated), MIL-STD-1275D (optional), MIL-STD-461E (optional), MIL-STD-704F (optional), MIL-HDBK-217 (optional) 
Size (H x W x D) 
mm (in) 
76.2 x 50.8 x 22.86 (3 x 2 x 0.9) 
Weight 
g (oz) 
119.7 (4.2) 
Baseplate Operating Temperature Range4 
°C (°F) 
-40 - 105 (-40 - 221) 
Ambient Temperature Range 
°C (°F) 
-40 - 85 (-40 - 185) 
Storage Temperature Range 
°C (°F) 
-50 - 100 (-58 - 212) 
Thermal Shock 
°C (°F) 
-40 - 85 (-40 - 185) in 2 minutes 
Vibration 
Grms 
30 for 5 minutes in 3 axes 
Relative Humidity 
- 
0 - 95% Non-Condensing 
Form Factor 
- 
PCB Mounted 
P1 Connector 
- 
16-pin, 2.54 mm spaced header 
P2 Connector 
- 
22-pin, 2.54 mm spaced, dual-row header 
P3 Connector 
- 
22-pin, 2.54 mm spaced, dual-row header 
Notes 
1. Maximum duration of peak current is ~2 seconds. Peak RMS value must not exceed continuous current rating of the drive. 
2. Lower inductance is acceptable for bus voltages well below maximum. Use external inductance to meet requirements. 
3. It is recommended to connect a 100 μF / 100 V external bus capacitor between High Voltage and Power Ground. 
4. Additional cooling and/or heatsink may be required to achieve rated performance. 
ELECTROMATE 
Toll Free Phone (877) SERVO98 
Toll Free Fax (877) SERV099 
www.electromate.com 
sales@electromate.com 
Sold & Serviced By:
Analog Servo Drive AZXB25A8 
PIN FUNCTIONS 
P1 - Signal Connector 
Pin 
Name 
Description / Notes 
I/O 
1 
+REF IN 
Differential Reference Input (±10 V Operating Range, ±15 V Maximum Input) 
I 
2 
SIGNAL GND 
Signal Ground 
GND 
3 
-REF IN 
Differential Reference Input (±10 V Operating Range, ±15 V Maximum Input) 
I 
4 
CURRENT MONITOR 
Current Monitor. Analog output signal proportional to the actual current output. Scaling is 13.5 A/V. Measure relative to signal ground. 
O 
5 
INHIBIT IN 
TTL level (+5 V) inhibit/enable input. Leave open to enable drive. Pull to ground to inhibit drive. Inhibit turns off all power devices. 
I 
6 
+V HALL OUT 
Low Power Supply For Hall Sensors (+6 V @ 30 mA). Referenced to signal ground. Short circuit protected. 
O 
7 
SIGNAL GND 
Signal Ground 
GND 
8 
HALL 1 
Single-ended Hall/Commutation Sensor Inputs (+5 V logic level) 
I 
9 
HALL 2* 
I 
10 
HALL 3 
I 
11 
CURRENT REFERENCE 
Measures the command signal to the internal current-loop. This pin has a maximum output of ±7.3 V when the drive outputs maximum peak current. Measure relative to signal ground. 
O 
12 
FAULT OUT 
TTL level (+5 V) output becomes high when power devices are disabled due to at least one of the following conditions: inhibit, invalid Hall state, output short circuit, over voltage, over temperature, power-up reset. 
O 
13 
RESERVED 
Reserved 
- 
14 
RESERVED 
- 
15 
RESERVED 
- 
16 
RESERVED 
- 
P2 and P3 - Power Connector 
Pin 
Name 
Description / Notes 
I/O 
1b 
1a 
HIGH VOLTAGE 
DC Power Input. 3A Continuous Current Rating Per Pin. It is recommended to connect a 100 μF / 100 V external capacitor between High Voltage and Power Ground. 
I 
2b 
2a 
HIGH VOLTAGE 
I 
3b 
NC 
Not Connected (Reserved) 
- 
3a 
NC (KEY) 
Key: No Connection (pin removed) for P2. Not Connected (Reserved) for P3. 
- 
4b 
4a 
PWR GND 
Power Ground (Common With Signal Ground). 3A Continuous Current Rating Per Pin. 
GND 
5b 
5a 
PWR GND 
GND 
6b 
6a 
MOTOR C 
Motor Phase Outputs. Current output distributed equally across both P2 and P3 connectors – 8 pins per motor phase, 3A continuous current carrying capacity per pin. 
O 
7b 
7a 
MOTOR C 
O 
8b 
8a 
MOTOR B 
O 
9b 
9a 
MOTOR B 
O 
10b 
10a 
MOTOR A 
O 
11b 
11a 
MOTOR A 
O 
*For use with Single Phase (Brushed) motors, ground Hall 2 and only connect motor leads to Motor A and Motor B. 
HARDWARE SETTINGS 
Jumper Settings 
The drive PCB is conformal coated, thereby making it difficult to change jumper settings. Jumpers are SMT 0 ohm resistors located on the underside of the drive PCB. By default, the drive is configured with the jumpers installed. Typical drive operation will not require the jumpers to be removed. Please contact the factory before jumper removal. 
Jumper 
Description 
Configuration 
SMT Jumper (0Ω Resistor) 
Not Installed 
Installed 
JE1 
Inhibit logic. Sets the logic level of inhibit pins. Labeled JE1 on the PCB of the drive. 
Low Enable 
Low Inhibit 
JE2 
Hall sensor phasing. Selects 120 or 60 degree commutation phasing. Labeled JE2 on the PCB of the drive. 
60 degree 
120 degree 
ELECTROMATE 
Toll Free Phone (877) SERVO98 
Toll Free Fax (877) SERV099 
www.electromate.com 
sales@electromate.com 
Sold & Serviced By:
Analog Servo Drive AZXB25A8 
MECHANICAL INFORMATION 
P1 - Signal Connector 
Connector Information 
16-pin, 2.54 mm spaced header 
Mating Connector 
Details 
Samtec: BCS-116-L-S-PE 
Included with Drive 
No 
+REF IN1SIGNAL GND2-REF IN3CURRENT MONITOR4INHIBIT IN5+V HALL OUT6SIGNAL GND7HALL 18HALL 29HALL 310CURRENT REFERENCE11FAULT OUT12 
P2 - Power Connector 
Connector Information 
22-pin, 2.54 mm spaced, dual-row header 
Mating Connector 
Details 
Samtec: SSM-111-L-DV 
Included with Drive 
No 
MOTOR A11aMOTOR A11bMOTOR A10aMOTOR A10bMOTOR B9aMOTOR B9bMOTOR B8aMOTOR B8bMOTOR C7aMOTOR C7bMOTOR C6aMOTOR C6bPWR GND5aPWR GND4aPWR GND5bNC3bPWR GND4bHIGH VOLTAGE2bHIGH VOLTAGE1bHIGH VOLTAGE1aHIGH VOLTAGE2aNC (KEY)3a 
P3 - Power Connector 
Connector Information 
22-pin, 2.54 mm spaced, dual-row header 
Mating Connector 
Details 
Samtec: SSM-111-L-DV 
Included with Drive 
No 
MOTOR A11aMOTOR A11bMOTOR A10aMOTOR A10bMOTOR B9aMOTOR B9bMOTOR B8aMOTOR B8bMOTOR C7aMOTOR C7bMOTOR C6aMOTOR C6bPWR GND5aPWR GND4aPWR GND5bNC3bPWR GND4bHIGH VOLTAGE2bHIGH VOLTAGE1bHIGH VOLTAGE1aHIGH VOLTAGE2aNC3a 
ELECTROMATE 
Toll Free Phone (877) SERVO98 
Toll Free Fax (877) SERV099 
www.electromate.com 
sales@electromate.com 
Sold & Serviced By:
Analog Servo Drive AZXB25A8 
MOUNTING DIMENSIONS 
ELECTROMATE 
Toll Free Phone (877) SERVO98 
Toll Free Fax (877) SERV099 
www.electromate.com 
sales@electromate.com 
Sold & Serviced By:
Analog Servo Drive AZXB25A8 
PART NUMBERING INFORMATION 
AMax DC Bus Voltage (1:10 in Volts) 825- Additional Options* Blank:Current Mode onlyE:Encoder Velocity Mode AvailableH:Hall velocity Mode AvailableBAZ Analog Drive SeriesAZDrive TypeB:Brushless/BrushedBDC:Brushless/Brushed, PWM CommandFeedback Supported8:80XX:EXTended Environmental RatingsInverted Inhibit LogicINV: *Options available for orders with sufficient volume. Contact ADVANCED Motion Controls for more information. 8:8 Peak, 4 Continuous15:15 Peak, 7.5 ContinuousPeak Current (Amps) 25:25 Peak, 12.5 ContinuousEnvironment Option 
ADVANCED Motion Controls AZ series of servo drives are available in many configurations. Note that not all possible part number combinations are offered as standard drives. All models listed in the selection tables of the website are readily available, standard product offerings. 
ADVANCED Motion Controls also has the capability to promptly develop and deliver specified products for OEMs with volume requests. Our Applications and Engineering Departments will work closely with your design team through all stages of development in order to provide the best servo drive solution for your system. Equipped with on-site manufacturing for quick- turn customs capabilities, ADVANCED Motion Controls utilizes our years of engineering and manufacturing expertise to decrease your costs and time-to-market while increasing system quality and reliability. 
Examples of Modifications and Customized Products 
 Integration of Drive into Motor Housing 
 Integrate OEM Circuitry onto Drive PCB 
 Mount OEM PCB onto Drive Without Cables 
 Custom Control Loop Tuned to Motor Characteristics 
 Multi-axis Configuration for Compact System 
 Custom I/O Interface for System Compatibility 
 Custom PCB and Baseplate for Optimized Footprint 
 Preset Switches and Pots to Reduce User Setup 
 RTV/Epoxy Components for High Vibration 
 Optimized Switching Frequency 
 OEM Specified Connectors for Instant Compatibility 
 Ramped Velocity Command for Smooth Acceleration 
 OEM Specified Silkscreen for Custom Appearance 
 Remove Unused Features to Reduce OEM Cost 
 Increased Thermal Limits for High Temp. Operation 
 Application Specific Current and Voltage Limits 
Feel free to contact Applications Engineering for further information and details. 
Available Accessories 
ADVANCED Motion Controls offers a variety of accessories designed to facilitate drive integration into a servo system. 
Visit www.a-m-c.com to see which accessories will assist with your application design and implementation. Power Supplies 
Shunt Regulators 
Mounting Card 
MC1XAZ01 
Filter Cards 
To Motor 
Drive(s) 
All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document. 
ELECTROMATE 
Toll Free Phone (877) SERVO98 
Toll Free Fax (877) SERV099 
www.electromate.com 
sales@electromate.com 
Sold & Serviced By:

More Related Content

What's hot

Advanced motion controls az40a8ddc
Advanced motion controls az40a8ddcAdvanced motion controls az40a8ddc
Advanced motion controls az40a8ddc
Electromate
 
Advanced motion controls az25a20ddc
Advanced motion controls az25a20ddcAdvanced motion controls az25a20ddc
Advanced motion controls az25a20ddc
Electromate
 
Advanced motion controls az60a8ddc
Advanced motion controls az60a8ddcAdvanced motion controls az60a8ddc
Advanced motion controls az60a8ddc
Electromate
 
Advanced motion controls azbh10a20
Advanced motion controls azbh10a20Advanced motion controls azbh10a20
Advanced motion controls azbh10a20
Electromate
 
Advanced motion controls az10a20ddc
Advanced motion controls az10a20ddcAdvanced motion controls az10a20ddc
Advanced motion controls az10a20ddc
Electromate
 
Advanced motion controls az10a20
Advanced motion controls az10a20Advanced motion controls az10a20
Advanced motion controls az10a20
Electromate
 
Advanced motion controls azbdc60a8
Advanced motion controls azbdc60a8Advanced motion controls azbdc60a8
Advanced motion controls azbdc60a8
Electromate
 
Advanced motion controls azxbh8a8
Advanced motion controls azxbh8a8Advanced motion controls azxbh8a8
Advanced motion controls azxbh8a8
Electromate
 
Advanced motion controls azbdc10a20
Advanced motion controls azbdc10a20Advanced motion controls azbdc10a20
Advanced motion controls azbdc10a20
Electromate
 
Advanced motion controls azb60a8
Advanced motion controls azb60a8Advanced motion controls azb60a8
Advanced motion controls azb60a8
Electromate
 
Advanced motion controls azb40a8
Advanced motion controls azb40a8Advanced motion controls azb40a8
Advanced motion controls azb40a8
Electromate
 
Advanced motion controls azbdc20a8
Advanced motion controls azbdc20a8Advanced motion controls azbdc20a8
Advanced motion controls azbdc20a8
Electromate
 
Advanced motion controls azbdc40a8
Advanced motion controls azbdc40a8Advanced motion controls azbdc40a8
Advanced motion controls azbdc40a8
Electromate
 
Advanced motion controls azb25a20
Advanced motion controls azb25a20Advanced motion controls azb25a20
Advanced motion controls azb25a20
Electromate
 
Advanced motion controls azxbh15a8
Advanced motion controls azxbh15a8Advanced motion controls azxbh15a8
Advanced motion controls azxbh15a8
Electromate
 
Advanced motion controls azbdc25a20
Advanced motion controls azbdc25a20Advanced motion controls azbdc25a20
Advanced motion controls azbdc25a20
Electromate
 
Advanced motion controls azb10a20
Advanced motion controls azb10a20Advanced motion controls azb10a20
Advanced motion controls azb10a20
Electromate
 
Advanced motion controls azb20a20
Advanced motion controls azb20a20Advanced motion controls azb20a20
Advanced motion controls azb20a20
Electromate
 
Advanced motion controls azb12a8
Advanced motion controls azb12a8Advanced motion controls azb12a8
Advanced motion controls azb12a8
Electromate
 
Advanced motion controls azbdc10a4
Advanced motion controls azbdc10a4Advanced motion controls azbdc10a4
Advanced motion controls azbdc10a4
Electromate
 

What's hot (20)

Advanced motion controls az40a8ddc
Advanced motion controls az40a8ddcAdvanced motion controls az40a8ddc
Advanced motion controls az40a8ddc
 
Advanced motion controls az25a20ddc
Advanced motion controls az25a20ddcAdvanced motion controls az25a20ddc
Advanced motion controls az25a20ddc
 
Advanced motion controls az60a8ddc
Advanced motion controls az60a8ddcAdvanced motion controls az60a8ddc
Advanced motion controls az60a8ddc
 
Advanced motion controls azbh10a20
Advanced motion controls azbh10a20Advanced motion controls azbh10a20
Advanced motion controls azbh10a20
 
Advanced motion controls az10a20ddc
Advanced motion controls az10a20ddcAdvanced motion controls az10a20ddc
Advanced motion controls az10a20ddc
 
Advanced motion controls az10a20
Advanced motion controls az10a20Advanced motion controls az10a20
Advanced motion controls az10a20
 
Advanced motion controls azbdc60a8
Advanced motion controls azbdc60a8Advanced motion controls azbdc60a8
Advanced motion controls azbdc60a8
 
Advanced motion controls azxbh8a8
Advanced motion controls azxbh8a8Advanced motion controls azxbh8a8
Advanced motion controls azxbh8a8
 
Advanced motion controls azbdc10a20
Advanced motion controls azbdc10a20Advanced motion controls azbdc10a20
Advanced motion controls azbdc10a20
 
Advanced motion controls azb60a8
Advanced motion controls azb60a8Advanced motion controls azb60a8
Advanced motion controls azb60a8
 
Advanced motion controls azb40a8
Advanced motion controls azb40a8Advanced motion controls azb40a8
Advanced motion controls azb40a8
 
Advanced motion controls azbdc20a8
Advanced motion controls azbdc20a8Advanced motion controls azbdc20a8
Advanced motion controls azbdc20a8
 
Advanced motion controls azbdc40a8
Advanced motion controls azbdc40a8Advanced motion controls azbdc40a8
Advanced motion controls azbdc40a8
 
Advanced motion controls azb25a20
Advanced motion controls azb25a20Advanced motion controls azb25a20
Advanced motion controls azb25a20
 
Advanced motion controls azxbh15a8
Advanced motion controls azxbh15a8Advanced motion controls azxbh15a8
Advanced motion controls azxbh15a8
 
Advanced motion controls azbdc25a20
Advanced motion controls azbdc25a20Advanced motion controls azbdc25a20
Advanced motion controls azbdc25a20
 
Advanced motion controls azb10a20
Advanced motion controls azb10a20Advanced motion controls azb10a20
Advanced motion controls azb10a20
 
Advanced motion controls azb20a20
Advanced motion controls azb20a20Advanced motion controls azb20a20
Advanced motion controls azb20a20
 
Advanced motion controls azb12a8
Advanced motion controls azb12a8Advanced motion controls azb12a8
Advanced motion controls azb12a8
 
Advanced motion controls azbdc10a4
Advanced motion controls azbdc10a4Advanced motion controls azbdc10a4
Advanced motion controls azbdc10a4
 

Similar to Advanced motion controls azxb25a8

Advanced motion controls azxbe15a8
Advanced motion controls azxbe15a8Advanced motion controls azxbe15a8
Advanced motion controls azxbe15a8
Electromate
 
Advanced motion controls azxbe8a8
Advanced motion controls azxbe8a8Advanced motion controls azxbe8a8
Advanced motion controls azxbe8a8
Electromate
 
Advanced motion controls az20a8ddc
Advanced motion controls az20a8ddcAdvanced motion controls az20a8ddc
Advanced motion controls az20a8ddc
Electromate
 
Advanced motion controls az20a8
Advanced motion controls az20a8Advanced motion controls az20a8
Advanced motion controls az20a8
Electromate
 
Advanced motion controls azbdc12a8
Advanced motion controls azbdc12a8Advanced motion controls azbdc12a8
Advanced motion controls azbdc12a8
Electromate
 
Advanced motion controls azbdc20a20
Advanced motion controls azbdc20a20Advanced motion controls azbdc20a20
Advanced motion controls azbdc20a20
Electromate
 
Advanced motion controls azbh40a8
Advanced motion controls azbh40a8Advanced motion controls azbh40a8
Advanced motion controls azbh40a8
Electromate
 
Advanced motion controls azbdc6a8
Advanced motion controls azbdc6a8Advanced motion controls azbdc6a8
Advanced motion controls azbdc6a8
Electromate
 
Advanced motion controls az12a8ddc
Advanced motion controls az12a8ddcAdvanced motion controls az12a8ddc
Advanced motion controls az12a8ddc
Electromate
 
Advanced motion controls az20a8i
Advanced motion controls az20a8iAdvanced motion controls az20a8i
Advanced motion controls az20a8i
Electromate
 
Advanced motion controls az20a8i final
Advanced motion controls az20a8i finalAdvanced motion controls az20a8i final
Advanced motion controls az20a8i final
Electromate
 
Advanced motion controls azbh25a20
Advanced motion controls azbh25a20Advanced motion controls azbh25a20
Advanced motion controls azbh25a20
Electromate
 

Similar to Advanced motion controls azxb25a8 (12)

Advanced motion controls azxbe15a8
Advanced motion controls azxbe15a8Advanced motion controls azxbe15a8
Advanced motion controls azxbe15a8
 
Advanced motion controls azxbe8a8
Advanced motion controls azxbe8a8Advanced motion controls azxbe8a8
Advanced motion controls azxbe8a8
 
Advanced motion controls az20a8ddc
Advanced motion controls az20a8ddcAdvanced motion controls az20a8ddc
Advanced motion controls az20a8ddc
 
Advanced motion controls az20a8
Advanced motion controls az20a8Advanced motion controls az20a8
Advanced motion controls az20a8
 
Advanced motion controls azbdc12a8
Advanced motion controls azbdc12a8Advanced motion controls azbdc12a8
Advanced motion controls azbdc12a8
 
Advanced motion controls azbdc20a20
Advanced motion controls azbdc20a20Advanced motion controls azbdc20a20
Advanced motion controls azbdc20a20
 
Advanced motion controls azbh40a8
Advanced motion controls azbh40a8Advanced motion controls azbh40a8
Advanced motion controls azbh40a8
 
Advanced motion controls azbdc6a8
Advanced motion controls azbdc6a8Advanced motion controls azbdc6a8
Advanced motion controls azbdc6a8
 
Advanced motion controls az12a8ddc
Advanced motion controls az12a8ddcAdvanced motion controls az12a8ddc
Advanced motion controls az12a8ddc
 
Advanced motion controls az20a8i
Advanced motion controls az20a8iAdvanced motion controls az20a8i
Advanced motion controls az20a8i
 
Advanced motion controls az20a8i final
Advanced motion controls az20a8i finalAdvanced motion controls az20a8i final
Advanced motion controls az20a8i final
 
Advanced motion controls azbh25a20
Advanced motion controls azbh25a20Advanced motion controls azbh25a20
Advanced motion controls azbh25a20
 

More from Electromate

Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator  new produc...Automated screw thread quality checking using SMAC LAR55 actuator  new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Electromate
 
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Electromate
 
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Electromate
 
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Electromate
 
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Electromate
 
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Electromate
 
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Electromate
 
Thomson Linear Dual Shaft Rail 2DA Modular Specs
Thomson Linear Dual Shaft Rail 2DA Modular SpecsThomson Linear Dual Shaft Rail 2DA Modular Specs
Thomson Linear Dual Shaft Rail 2DA Modular Specs
Electromate
 
Thomson Linear 2DA QuickSlide System with Brake
Thomson Linear 2DA QuickSlide System with BrakeThomson Linear 2DA QuickSlide System with Brake
Thomson Linear 2DA QuickSlide System with Brake
Electromate
 
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage SpecsThomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Electromate
 
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported SpecsThomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Electromate
 
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage SpecsThomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Electromate
 
Thomson Linear RoundRail Twin Shaft Web 2CA
Thomson Linear RoundRail Twin Shaft Web 2CAThomson Linear RoundRail Twin Shaft Web 2CA
Thomson Linear RoundRail Twin Shaft Web 2CA
Electromate
 
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported SpecsThomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Electromate
 
Thomson Linear WhisperTrak Actuators
Thomson Linear WhisperTrak ActuatorsThomson Linear WhisperTrak Actuators
Thomson Linear WhisperTrak Actuators
Electromate
 
Thomson T-Series Profile Rail
Thomson T-Series Profile RailThomson T-Series Profile Rail
Thomson T-Series Profile Rail
Electromate
 
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows SpecsThomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Electromate
 
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA SpecsThomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Electromate
 
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC SpecsThomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Electromate
 
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB SpecsThomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Electromate
 

More from Electromate (20)

Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator  new produc...Automated screw thread quality checking using SMAC LAR55 actuator  new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
 
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
 
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
 
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
 
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
 
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
 
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
 
Thomson Linear Dual Shaft Rail 2DA Modular Specs
Thomson Linear Dual Shaft Rail 2DA Modular SpecsThomson Linear Dual Shaft Rail 2DA Modular Specs
Thomson Linear Dual Shaft Rail 2DA Modular Specs
 
Thomson Linear 2DA QuickSlide System with Brake
Thomson Linear 2DA QuickSlide System with BrakeThomson Linear 2DA QuickSlide System with Brake
Thomson Linear 2DA QuickSlide System with Brake
 
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage SpecsThomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
 
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported SpecsThomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
 
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage SpecsThomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
 
Thomson Linear RoundRail Twin Shaft Web 2CA
Thomson Linear RoundRail Twin Shaft Web 2CAThomson Linear RoundRail Twin Shaft Web 2CA
Thomson Linear RoundRail Twin Shaft Web 2CA
 
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported SpecsThomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
 
Thomson Linear WhisperTrak Actuators
Thomson Linear WhisperTrak ActuatorsThomson Linear WhisperTrak Actuators
Thomson Linear WhisperTrak Actuators
 
Thomson T-Series Profile Rail
Thomson T-Series Profile RailThomson T-Series Profile Rail
Thomson T-Series Profile Rail
 
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows SpecsThomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
 
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA SpecsThomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
 
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC SpecsThomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
 
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB SpecsThomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
 

Recently uploaded

Using LLM Agents with Llama 3, LangGraph and Milvus
Using LLM Agents with Llama 3, LangGraph and MilvusUsing LLM Agents with Llama 3, LangGraph and Milvus
Using LLM Agents with Llama 3, LangGraph and Milvus
Zilliz
 
Uncharted Together- Navigating AI's New Frontiers in Libraries
Uncharted Together- Navigating AI's New Frontiers in LibrariesUncharted Together- Navigating AI's New Frontiers in Libraries
Uncharted Together- Navigating AI's New Frontiers in Libraries
Brian Pichman
 
TrustArc Webinar - 2024 Data Privacy Trends: A Mid-Year Check-In
TrustArc Webinar - 2024 Data Privacy Trends: A Mid-Year Check-InTrustArc Webinar - 2024 Data Privacy Trends: A Mid-Year Check-In
TrustArc Webinar - 2024 Data Privacy Trends: A Mid-Year Check-In
TrustArc
 
Evolution of iPaaS - simplify IT workloads to provide a unified view of data...
Evolution of iPaaS - simplify IT workloads to provide a unified view of  data...Evolution of iPaaS - simplify IT workloads to provide a unified view of  data...
Evolution of iPaaS - simplify IT workloads to provide a unified view of data...
Torry Harris
 
BLOCKCHAIN TECHNOLOGY - Advantages and Disadvantages
BLOCKCHAIN TECHNOLOGY - Advantages and DisadvantagesBLOCKCHAIN TECHNOLOGY - Advantages and Disadvantages
BLOCKCHAIN TECHNOLOGY - Advantages and Disadvantages
SAI KAILASH R
 
Girls Call Churchgate 9910780858 Provide Best And Top Girl Service And No1 in...
Girls Call Churchgate 9910780858 Provide Best And Top Girl Service And No1 in...Girls Call Churchgate 9910780858 Provide Best And Top Girl Service And No1 in...
Girls Call Churchgate 9910780858 Provide Best And Top Girl Service And No1 in...
maigasapphire
 
The importance of Quality Assurance for ICT Standardization
The importance of Quality Assurance for ICT StandardizationThe importance of Quality Assurance for ICT Standardization
The importance of Quality Assurance for ICT Standardization
Axel Rennoch
 
(CISOPlatform Summit & SACON 2024) Digital Personal Data Protection Act.pdf
(CISOPlatform Summit & SACON 2024) Digital Personal Data Protection Act.pdf(CISOPlatform Summit & SACON 2024) Digital Personal Data Protection Act.pdf
(CISOPlatform Summit & SACON 2024) Digital Personal Data Protection Act.pdf
Priyanka Aash
 
“Deploying Large Language Models on a Raspberry Pi,” a Presentation from Usef...
“Deploying Large Language Models on a Raspberry Pi,” a Presentation from Usef...“Deploying Large Language Models on a Raspberry Pi,” a Presentation from Usef...
“Deploying Large Language Models on a Raspberry Pi,” a Presentation from Usef...
Edge AI and Vision Alliance
 
High Profile Girls Call ServiCe Hyderabad 0000000000 Tanisha Best High Class ...
High Profile Girls Call ServiCe Hyderabad 0000000000 Tanisha Best High Class ...High Profile Girls Call ServiCe Hyderabad 0000000000 Tanisha Best High Class ...
High Profile Girls Call ServiCe Hyderabad 0000000000 Tanisha Best High Class ...
aslasdfmkhan4750
 
The Rise of AI in Cybersecurity How Machine Learning Will Shape Threat Detect...
The Rise of AI in Cybersecurity How Machine Learning Will Shape Threat Detect...The Rise of AI in Cybersecurity How Machine Learning Will Shape Threat Detect...
The Rise of AI in Cybersecurity How Machine Learning Will Shape Threat Detect...
digitalxplive
 
The Role of IoT in Australian Mobile App Development - PDF Guide
The Role of IoT in Australian Mobile App Development - PDF GuideThe Role of IoT in Australian Mobile App Development - PDF Guide
The Role of IoT in Australian Mobile App Development - PDF Guide
Shiv Technolabs
 
Premium Girls Call Mumbai 9920725232 Unlimited Short Providing Girls Service ...
Premium Girls Call Mumbai 9920725232 Unlimited Short Providing Girls Service ...Premium Girls Call Mumbai 9920725232 Unlimited Short Providing Girls Service ...
Premium Girls Call Mumbai 9920725232 Unlimited Short Providing Girls Service ...
shanihomely
 
Litestack talk at Brighton 2024 (Unleashing the power of SQLite for Ruby apps)
Litestack talk at Brighton 2024 (Unleashing the power of SQLite for Ruby apps)Litestack talk at Brighton 2024 (Unleashing the power of SQLite for Ruby apps)
Litestack talk at Brighton 2024 (Unleashing the power of SQLite for Ruby apps)
Muhammad Ali
 
Vertex AI Agent Builder - GDG Alicante - Julio 2024
Vertex AI Agent Builder - GDG Alicante - Julio 2024Vertex AI Agent Builder - GDG Alicante - Julio 2024
Vertex AI Agent Builder - GDG Alicante - Julio 2024
Nicolás Lopéz
 
Integrating Kafka with MuleSoft 4 and usecase
Integrating Kafka with MuleSoft 4 and usecaseIntegrating Kafka with MuleSoft 4 and usecase
Integrating Kafka with MuleSoft 4 and usecase
shyamraj55
 
Best Practices for Effectively Running dbt in Airflow.pdf
Best Practices for Effectively Running dbt in Airflow.pdfBest Practices for Effectively Running dbt in Airflow.pdf
Best Practices for Effectively Running dbt in Airflow.pdf
Tatiana Al-Chueyr
 
Salesforce AI & Einstein Copilot Workshop
Salesforce AI & Einstein Copilot WorkshopSalesforce AI & Einstein Copilot Workshop
Salesforce AI & Einstein Copilot Workshop
CEPTES Software Inc
 
High Profile Girls call Service Pune 000XX00000 Provide Best And Top Girl Ser...
High Profile Girls call Service Pune 000XX00000 Provide Best And Top Girl Ser...High Profile Girls call Service Pune 000XX00000 Provide Best And Top Girl Ser...
High Profile Girls call Service Pune 000XX00000 Provide Best And Top Girl Ser...
bhumivarma35300
 
Introduction-to-the-IAM-Platform-Implementation-Plan.pptx
Introduction-to-the-IAM-Platform-Implementation-Plan.pptxIntroduction-to-the-IAM-Platform-Implementation-Plan.pptx
Introduction-to-the-IAM-Platform-Implementation-Plan.pptx
313mohammedarshad
 

Recently uploaded (20)

Using LLM Agents with Llama 3, LangGraph and Milvus
Using LLM Agents with Llama 3, LangGraph and MilvusUsing LLM Agents with Llama 3, LangGraph and Milvus
Using LLM Agents with Llama 3, LangGraph and Milvus
 
Uncharted Together- Navigating AI's New Frontiers in Libraries
Uncharted Together- Navigating AI's New Frontiers in LibrariesUncharted Together- Navigating AI's New Frontiers in Libraries
Uncharted Together- Navigating AI's New Frontiers in Libraries
 
TrustArc Webinar - 2024 Data Privacy Trends: A Mid-Year Check-In
TrustArc Webinar - 2024 Data Privacy Trends: A Mid-Year Check-InTrustArc Webinar - 2024 Data Privacy Trends: A Mid-Year Check-In
TrustArc Webinar - 2024 Data Privacy Trends: A Mid-Year Check-In
 
Evolution of iPaaS - simplify IT workloads to provide a unified view of data...
Evolution of iPaaS - simplify IT workloads to provide a unified view of  data...Evolution of iPaaS - simplify IT workloads to provide a unified view of  data...
Evolution of iPaaS - simplify IT workloads to provide a unified view of data...
 
BLOCKCHAIN TECHNOLOGY - Advantages and Disadvantages
BLOCKCHAIN TECHNOLOGY - Advantages and DisadvantagesBLOCKCHAIN TECHNOLOGY - Advantages and Disadvantages
BLOCKCHAIN TECHNOLOGY - Advantages and Disadvantages
 
Girls Call Churchgate 9910780858 Provide Best And Top Girl Service And No1 in...
Girls Call Churchgate 9910780858 Provide Best And Top Girl Service And No1 in...Girls Call Churchgate 9910780858 Provide Best And Top Girl Service And No1 in...
Girls Call Churchgate 9910780858 Provide Best And Top Girl Service And No1 in...
 
The importance of Quality Assurance for ICT Standardization
The importance of Quality Assurance for ICT StandardizationThe importance of Quality Assurance for ICT Standardization
The importance of Quality Assurance for ICT Standardization
 
(CISOPlatform Summit & SACON 2024) Digital Personal Data Protection Act.pdf
(CISOPlatform Summit & SACON 2024) Digital Personal Data Protection Act.pdf(CISOPlatform Summit & SACON 2024) Digital Personal Data Protection Act.pdf
(CISOPlatform Summit & SACON 2024) Digital Personal Data Protection Act.pdf
 
“Deploying Large Language Models on a Raspberry Pi,” a Presentation from Usef...
“Deploying Large Language Models on a Raspberry Pi,” a Presentation from Usef...“Deploying Large Language Models on a Raspberry Pi,” a Presentation from Usef...
“Deploying Large Language Models on a Raspberry Pi,” a Presentation from Usef...
 
High Profile Girls Call ServiCe Hyderabad 0000000000 Tanisha Best High Class ...
High Profile Girls Call ServiCe Hyderabad 0000000000 Tanisha Best High Class ...High Profile Girls Call ServiCe Hyderabad 0000000000 Tanisha Best High Class ...
High Profile Girls Call ServiCe Hyderabad 0000000000 Tanisha Best High Class ...
 
The Rise of AI in Cybersecurity How Machine Learning Will Shape Threat Detect...
The Rise of AI in Cybersecurity How Machine Learning Will Shape Threat Detect...The Rise of AI in Cybersecurity How Machine Learning Will Shape Threat Detect...
The Rise of AI in Cybersecurity How Machine Learning Will Shape Threat Detect...
 
The Role of IoT in Australian Mobile App Development - PDF Guide
The Role of IoT in Australian Mobile App Development - PDF GuideThe Role of IoT in Australian Mobile App Development - PDF Guide
The Role of IoT in Australian Mobile App Development - PDF Guide
 
Premium Girls Call Mumbai 9920725232 Unlimited Short Providing Girls Service ...
Premium Girls Call Mumbai 9920725232 Unlimited Short Providing Girls Service ...Premium Girls Call Mumbai 9920725232 Unlimited Short Providing Girls Service ...
Premium Girls Call Mumbai 9920725232 Unlimited Short Providing Girls Service ...
 
Litestack talk at Brighton 2024 (Unleashing the power of SQLite for Ruby apps)
Litestack talk at Brighton 2024 (Unleashing the power of SQLite for Ruby apps)Litestack talk at Brighton 2024 (Unleashing the power of SQLite for Ruby apps)
Litestack talk at Brighton 2024 (Unleashing the power of SQLite for Ruby apps)
 
Vertex AI Agent Builder - GDG Alicante - Julio 2024
Vertex AI Agent Builder - GDG Alicante - Julio 2024Vertex AI Agent Builder - GDG Alicante - Julio 2024
Vertex AI Agent Builder - GDG Alicante - Julio 2024
 
Integrating Kafka with MuleSoft 4 and usecase
Integrating Kafka with MuleSoft 4 and usecaseIntegrating Kafka with MuleSoft 4 and usecase
Integrating Kafka with MuleSoft 4 and usecase
 
Best Practices for Effectively Running dbt in Airflow.pdf
Best Practices for Effectively Running dbt in Airflow.pdfBest Practices for Effectively Running dbt in Airflow.pdf
Best Practices for Effectively Running dbt in Airflow.pdf
 
Salesforce AI & Einstein Copilot Workshop
Salesforce AI & Einstein Copilot WorkshopSalesforce AI & Einstein Copilot Workshop
Salesforce AI & Einstein Copilot Workshop
 
High Profile Girls call Service Pune 000XX00000 Provide Best And Top Girl Ser...
High Profile Girls call Service Pune 000XX00000 Provide Best And Top Girl Ser...High Profile Girls call Service Pune 000XX00000 Provide Best And Top Girl Ser...
High Profile Girls call Service Pune 000XX00000 Provide Best And Top Girl Ser...
 
Introduction-to-the-IAM-Platform-Implementation-Plan.pptx
Introduction-to-the-IAM-Platform-Implementation-Plan.pptxIntroduction-to-the-IAM-Platform-Implementation-Plan.pptx
Introduction-to-the-IAM-Platform-Implementation-Plan.pptx
 

Advanced motion controls azxb25a8

  • 1. Analog Servo Drive AZXB25A8 Description Power Range The AZXB25A8 PWM servo drive is designed to drive brushless and brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is designed for direct integration into your PCB. The AZXB30A8 is fully protected against over-voltage, under-voltage, over-current, over- heating and short-circuits. A single digital output indicates operating status. The drive interfaces with digital controllers that have analog ±10V output. This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS (Reduction of Hazardous Substances) compliant. The AZXB25A8 conforms to the following specifications and is designed to the Environmental Engineering Considerations as defined in MIL-STD-810F. Extended Environment Performance Ambient Temperature -40°C to +85°C (-40°F to +185°F) Storage Temperature -50°C to +100°C (-58°F to +212°F) Thermal Shock -40°C to +85°C (-40°F to +185°F) in 2 min. Relative Humidity 0 to 95% Non-Condensing Vibration 30 Grms for 5 min. in 3 axes See Part Numbering Information on last page of datasheet for additional ordering options. Peak Current 25 A Continuous Current 12.5 A Supply Voltage 10 - 80 VDC Features  High Power Density  Compact Size  Direct Board-to-Board Integration  Lightweight  High Switching Frequency  Four Quadrant Regenerative Operation  Wide Temperature Range  High Performance Thermal Dissipation  Differential Input Command  Current Monitor Output  Digital Fault Output Monitor  12VDC Operation HARDWARE PROTECTION  Over-Voltage  Under-Voltage  Over-Current  Over-Temperature  Short-circuit (phase-phase)  Short-circuit (phase-ground) INPUTS/OUTPUTS  Digital Fault Output  Digital Inhibit Input  Analog Current Monitor  Analog Command Input  Analog Current Reference FEEDBACK SUPPORTED  Hall Sensors MODES OF OPERATION  Current COMMUTATION  Trapezoidal MOTORS SUPPORTED  Three Phase (Brushless)  Single Phase (Brushed, Voice Coil, Inductive Load) COMMAND SOURCE  ±10 V Analog COMPLIANCES & AGENCY APPROVALS  UL  cUL  CE Class A (LVD)  CE Class A (EMC)  RoHS  MIL-STD-810F (as stated)  MIL-STD-1275D (optional)  MIL-STD-461E (optional)  MIL-STD-704F (optional)  MIL-HDBK-217 (optional) ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
  • 2. Analog Servo Drive AZXB25A8 BLOCK DIAGRAM Information on Approvals and Compliances US and Canadian safety compliance with UL 508c, the industrial standard for power conversion electronics. UL registered under file number E140173. Note that machine components compliant with UL are considered UL registered as opposed to UL listed as would be the case for commercial products. Compliant with European CE for both the Class A EMC Directive 2004/108/EC on Electromagnetic Compatibility (specifically EN 61000-6-4:2007 and EN 61000-6-2:2005) and LVD requirements of directive 2006/95/EC (specifically EN 60204-1:2006), a low voltage directive to protect users from electrical shock. MIL-STD-810F Environmental Engineering Considerations and Laboratory Tests – (as stated) MIL-STD-1275D Characteristics of 28 Volt DC Electrical Systems in Military Vehicles – (optional) MIL-STD-461E Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment – (optional) MIL-STD-704F Aircraft Electric Power Characteristics – (optional) MIL-HDBK-217 Reliability Prediction of Electronic Equipment (MTBF) – (optional) RoHS (Reduction of Hazardous Substances) is intended to prevent hazardous substances such as lead from being manufactured in electrical and electronic equipment. – (optional) ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
  • 3. Analog Servo Drive AZXB25A8 SPECIFICATIONS Power Specifications Description Units Value DC Supply Voltage Range VDC 10 - 80 DC Bus Under Voltage Limit VDC 9 DC Bus Over Voltage Limit VDC 88 Maximum Peak Output Current1 A 25 Maximum Continuous Output Current A 12.5 Maximum Continuous Output Power W 950 Maximum Power Dissipation at Continuous Current W 50 Minimum Load Inductance (Line-To-Line)2 μH 100 Internal Bus Capacitance3 μF 30 Low Voltage Supply Outputs - +6 VDC (30 mA) Switching Frequency kHz 31 Control Specifications Description Units Value Command Sources - ±10 V Analog Feedback Supported - Halls Commutation Methods - Trapezoidal Modes of Operation - Current Motors Supported - Three Phase (Brushless), Single Phase (Brushed, Voice Coil, Inductive Load) Hardware Protection - Invalid Commutation Feedback, Over Current, Over Temperature, Over Voltage, Under Voltage, Short Circuit (Phase-Phase & Phase-Ground) Mechanical Specifications Description Units Value Agency Approvals - UL, cUL, CE Class A (EMC), CE Class A (LVD), RoHS, MIL-STD-810F (as stated), MIL-STD-1275D (optional), MIL-STD-461E (optional), MIL-STD-704F (optional), MIL-HDBK-217 (optional) Size (H x W x D) mm (in) 76.2 x 50.8 x 22.86 (3 x 2 x 0.9) Weight g (oz) 119.7 (4.2) Baseplate Operating Temperature Range4 °C (°F) -40 - 105 (-40 - 221) Ambient Temperature Range °C (°F) -40 - 85 (-40 - 185) Storage Temperature Range °C (°F) -50 - 100 (-58 - 212) Thermal Shock °C (°F) -40 - 85 (-40 - 185) in 2 minutes Vibration Grms 30 for 5 minutes in 3 axes Relative Humidity - 0 - 95% Non-Condensing Form Factor - PCB Mounted P1 Connector - 16-pin, 2.54 mm spaced header P2 Connector - 22-pin, 2.54 mm spaced, dual-row header P3 Connector - 22-pin, 2.54 mm spaced, dual-row header Notes 1. Maximum duration of peak current is ~2 seconds. Peak RMS value must not exceed continuous current rating of the drive. 2. Lower inductance is acceptable for bus voltages well below maximum. Use external inductance to meet requirements. 3. It is recommended to connect a 100 μF / 100 V external bus capacitor between High Voltage and Power Ground. 4. Additional cooling and/or heatsink may be required to achieve rated performance. ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
  • 4. Analog Servo Drive AZXB25A8 PIN FUNCTIONS P1 - Signal Connector Pin Name Description / Notes I/O 1 +REF IN Differential Reference Input (±10 V Operating Range, ±15 V Maximum Input) I 2 SIGNAL GND Signal Ground GND 3 -REF IN Differential Reference Input (±10 V Operating Range, ±15 V Maximum Input) I 4 CURRENT MONITOR Current Monitor. Analog output signal proportional to the actual current output. Scaling is 13.5 A/V. Measure relative to signal ground. O 5 INHIBIT IN TTL level (+5 V) inhibit/enable input. Leave open to enable drive. Pull to ground to inhibit drive. Inhibit turns off all power devices. I 6 +V HALL OUT Low Power Supply For Hall Sensors (+6 V @ 30 mA). Referenced to signal ground. Short circuit protected. O 7 SIGNAL GND Signal Ground GND 8 HALL 1 Single-ended Hall/Commutation Sensor Inputs (+5 V logic level) I 9 HALL 2* I 10 HALL 3 I 11 CURRENT REFERENCE Measures the command signal to the internal current-loop. This pin has a maximum output of ±7.3 V when the drive outputs maximum peak current. Measure relative to signal ground. O 12 FAULT OUT TTL level (+5 V) output becomes high when power devices are disabled due to at least one of the following conditions: inhibit, invalid Hall state, output short circuit, over voltage, over temperature, power-up reset. O 13 RESERVED Reserved - 14 RESERVED - 15 RESERVED - 16 RESERVED - P2 and P3 - Power Connector Pin Name Description / Notes I/O 1b 1a HIGH VOLTAGE DC Power Input. 3A Continuous Current Rating Per Pin. It is recommended to connect a 100 μF / 100 V external capacitor between High Voltage and Power Ground. I 2b 2a HIGH VOLTAGE I 3b NC Not Connected (Reserved) - 3a NC (KEY) Key: No Connection (pin removed) for P2. Not Connected (Reserved) for P3. - 4b 4a PWR GND Power Ground (Common With Signal Ground). 3A Continuous Current Rating Per Pin. GND 5b 5a PWR GND GND 6b 6a MOTOR C Motor Phase Outputs. Current output distributed equally across both P2 and P3 connectors – 8 pins per motor phase, 3A continuous current carrying capacity per pin. O 7b 7a MOTOR C O 8b 8a MOTOR B O 9b 9a MOTOR B O 10b 10a MOTOR A O 11b 11a MOTOR A O *For use with Single Phase (Brushed) motors, ground Hall 2 and only connect motor leads to Motor A and Motor B. HARDWARE SETTINGS Jumper Settings The drive PCB is conformal coated, thereby making it difficult to change jumper settings. Jumpers are SMT 0 ohm resistors located on the underside of the drive PCB. By default, the drive is configured with the jumpers installed. Typical drive operation will not require the jumpers to be removed. Please contact the factory before jumper removal. Jumper Description Configuration SMT Jumper (0Ω Resistor) Not Installed Installed JE1 Inhibit logic. Sets the logic level of inhibit pins. Labeled JE1 on the PCB of the drive. Low Enable Low Inhibit JE2 Hall sensor phasing. Selects 120 or 60 degree commutation phasing. Labeled JE2 on the PCB of the drive. 60 degree 120 degree ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
  • 5. Analog Servo Drive AZXB25A8 MECHANICAL INFORMATION P1 - Signal Connector Connector Information 16-pin, 2.54 mm spaced header Mating Connector Details Samtec: BCS-116-L-S-PE Included with Drive No +REF IN1SIGNAL GND2-REF IN3CURRENT MONITOR4INHIBIT IN5+V HALL OUT6SIGNAL GND7HALL 18HALL 29HALL 310CURRENT REFERENCE11FAULT OUT12 P2 - Power Connector Connector Information 22-pin, 2.54 mm spaced, dual-row header Mating Connector Details Samtec: SSM-111-L-DV Included with Drive No MOTOR A11aMOTOR A11bMOTOR A10aMOTOR A10bMOTOR B9aMOTOR B9bMOTOR B8aMOTOR B8bMOTOR C7aMOTOR C7bMOTOR C6aMOTOR C6bPWR GND5aPWR GND4aPWR GND5bNC3bPWR GND4bHIGH VOLTAGE2bHIGH VOLTAGE1bHIGH VOLTAGE1aHIGH VOLTAGE2aNC (KEY)3a P3 - Power Connector Connector Information 22-pin, 2.54 mm spaced, dual-row header Mating Connector Details Samtec: SSM-111-L-DV Included with Drive No MOTOR A11aMOTOR A11bMOTOR A10aMOTOR A10bMOTOR B9aMOTOR B9bMOTOR B8aMOTOR B8bMOTOR C7aMOTOR C7bMOTOR C6aMOTOR C6bPWR GND5aPWR GND4aPWR GND5bNC3bPWR GND4bHIGH VOLTAGE2bHIGH VOLTAGE1bHIGH VOLTAGE1aHIGH VOLTAGE2aNC3a ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
  • 6. Analog Servo Drive AZXB25A8 MOUNTING DIMENSIONS ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
  • 7. Analog Servo Drive AZXB25A8 PART NUMBERING INFORMATION AMax DC Bus Voltage (1:10 in Volts) 825- Additional Options* Blank:Current Mode onlyE:Encoder Velocity Mode AvailableH:Hall velocity Mode AvailableBAZ Analog Drive SeriesAZDrive TypeB:Brushless/BrushedBDC:Brushless/Brushed, PWM CommandFeedback Supported8:80XX:EXTended Environmental RatingsInverted Inhibit LogicINV: *Options available for orders with sufficient volume. Contact ADVANCED Motion Controls for more information. 8:8 Peak, 4 Continuous15:15 Peak, 7.5 ContinuousPeak Current (Amps) 25:25 Peak, 12.5 ContinuousEnvironment Option ADVANCED Motion Controls AZ series of servo drives are available in many configurations. Note that not all possible part number combinations are offered as standard drives. All models listed in the selection tables of the website are readily available, standard product offerings. ADVANCED Motion Controls also has the capability to promptly develop and deliver specified products for OEMs with volume requests. Our Applications and Engineering Departments will work closely with your design team through all stages of development in order to provide the best servo drive solution for your system. Equipped with on-site manufacturing for quick- turn customs capabilities, ADVANCED Motion Controls utilizes our years of engineering and manufacturing expertise to decrease your costs and time-to-market while increasing system quality and reliability. Examples of Modifications and Customized Products  Integration of Drive into Motor Housing  Integrate OEM Circuitry onto Drive PCB  Mount OEM PCB onto Drive Without Cables  Custom Control Loop Tuned to Motor Characteristics  Multi-axis Configuration for Compact System  Custom I/O Interface for System Compatibility  Custom PCB and Baseplate for Optimized Footprint  Preset Switches and Pots to Reduce User Setup  RTV/Epoxy Components for High Vibration  Optimized Switching Frequency  OEM Specified Connectors for Instant Compatibility  Ramped Velocity Command for Smooth Acceleration  OEM Specified Silkscreen for Custom Appearance  Remove Unused Features to Reduce OEM Cost  Increased Thermal Limits for High Temp. Operation  Application Specific Current and Voltage Limits Feel free to contact Applications Engineering for further information and details. Available Accessories ADVANCED Motion Controls offers a variety of accessories designed to facilitate drive integration into a servo system. Visit www.a-m-c.com to see which accessories will assist with your application design and implementation. Power Supplies Shunt Regulators Mounting Card MC1XAZ01 Filter Cards To Motor Drive(s) All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document. ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By: