Hi Voltage Shock
•Download as PPS, PDF•
0 likes•450 views
Working with high voltage electricity can result in electrocution if the proper safety equipment is not used. Only qualified electrical workers using approved high voltage hotsticks with voltage-rated gloves should perform high voltage work, as using wire cutters can cause cables to blow away and result in electric shock entering and exiting the body at various points if an arc occurs to a grounded conduit.
Report
Share
Report
Share
![High Voltage Shock Effects ,[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Electrical work genral safety precautions
1) Before working on any electrical circuit or apparatus, switches must be opened and locked and safety precautions taken to ensure the circuit is dead.
2) Never work on live circuits without authorization. Treat all circuits as live until proven dead.
3) Wear appropriate protective equipment like rubber gloves and avoid loose clothing when working with electricity. Maintain a safe distance from energized equipment.
Electro-Chemical Machining Process
Electro-Chemical Machining Process, Diploma, Mechanical Engineering, Final Year, Fifth Sem, Advanced Manufacturing Process, Unit-I,
Presentation sop welding machine group 2
This document discusses welding, including its definition, purpose, equipment, use, dangers, and safety cautions. Welding is used to permanently connect two metal parts using thermal power. The primary purpose of a welding machine is to supply electrical power to a welding gun to create an arc that melts metal and produces a weld. Proper personal protective equipment should be worn and flammable materials kept at a safe distance during welding due to risks such as electric shock, radiation, fire, and burns.
Anti pinch power window
1) The document discusses anti-pinch devices for power windows in vehicles. It describes how existing devices can pinch limbs and aims to develop a safer mechanism.
2) It outlines 4 categories of anti-pinch technologies: indirect pressure sensing, direct pressure sensing, photoelectric obstacle detection, and capacitive human proximity detection.
3) The proposed project will develop an anti-pinch system using an Arduino, motor, sensors and switches. It aims to safely reverse the window if an object is detected without fully opening.
DIY automatic solar charger controller
Presentation of DIY automatic solar charger controller making by Vikram Kant kumar reference by instractable
Taller ingles 4 test7
This document contains a safety test with 21 true/false questions about the proper use and safety precautions for various power tools and hand tools. The majority of the answers are true, indicating safe practices like examining tools for damage before use, wearing appropriate protective equipment like safety glasses, keeping cords away from heat sources, only using tools in good condition, reporting any broken tools, and keeping a safe distance from moving parts. A few answers are false, showing unsafe actions to avoid like making adjustments while a power tool is running, pushing an adjustable wrench away, using wire cutters on live wires, or using a screwdriver improperly.
Electromagnetic Clutch - Principle of Operation
This presentation gives an overview of Electromagnetic clutches. It describes the main components and how clutches operate.
For more information, visit: http://kebblog.com/electromagnetic-clutch/
4. case studies on electrical maintanance
This case study examines electrical maintenance accidents and identifies common causes. It describes several real incidents where workers were injured or killed by electric shocks. Many accidents occurred because workers lacked adequate training, supervision, or risk assessment. Other contributing factors included unsafe work procedures, lack of equipment isolation, improper live working, unsuitable test equipment, and failure to properly manage or control electrical work activities.
Recommended
Electrical work genral safety precautions
1) Before working on any electrical circuit or apparatus, switches must be opened and locked and safety precautions taken to ensure the circuit is dead.
2) Never work on live circuits without authorization. Treat all circuits as live until proven dead.
3) Wear appropriate protective equipment like rubber gloves and avoid loose clothing when working with electricity. Maintain a safe distance from energized equipment.
Electro-Chemical Machining Process
Electro-Chemical Machining Process, Diploma, Mechanical Engineering, Final Year, Fifth Sem, Advanced Manufacturing Process, Unit-I,
Presentation sop welding machine group 2
This document discusses welding, including its definition, purpose, equipment, use, dangers, and safety cautions. Welding is used to permanently connect two metal parts using thermal power. The primary purpose of a welding machine is to supply electrical power to a welding gun to create an arc that melts metal and produces a weld. Proper personal protective equipment should be worn and flammable materials kept at a safe distance during welding due to risks such as electric shock, radiation, fire, and burns.
Anti pinch power window
1) The document discusses anti-pinch devices for power windows in vehicles. It describes how existing devices can pinch limbs and aims to develop a safer mechanism.
2) It outlines 4 categories of anti-pinch technologies: indirect pressure sensing, direct pressure sensing, photoelectric obstacle detection, and capacitive human proximity detection.
3) The proposed project will develop an anti-pinch system using an Arduino, motor, sensors and switches. It aims to safely reverse the window if an object is detected without fully opening.
DIY automatic solar charger controller
Presentation of DIY automatic solar charger controller making by Vikram Kant kumar reference by instractable
Taller ingles 4 test7
This document contains a safety test with 21 true/false questions about the proper use and safety precautions for various power tools and hand tools. The majority of the answers are true, indicating safe practices like examining tools for damage before use, wearing appropriate protective equipment like safety glasses, keeping cords away from heat sources, only using tools in good condition, reporting any broken tools, and keeping a safe distance from moving parts. A few answers are false, showing unsafe actions to avoid like making adjustments while a power tool is running, pushing an adjustable wrench away, using wire cutters on live wires, or using a screwdriver improperly.
Electromagnetic Clutch - Principle of Operation
This presentation gives an overview of Electromagnetic clutches. It describes the main components and how clutches operate.
For more information, visit: http://kebblog.com/electromagnetic-clutch/
4. case studies on electrical maintanance
This case study examines electrical maintenance accidents and identifies common causes. It describes several real incidents where workers were injured or killed by electric shocks. Many accidents occurred because workers lacked adequate training, supervision, or risk assessment. Other contributing factors included unsafe work procedures, lack of equipment isolation, improper live working, unsuitable test equipment, and failure to properly manage or control electrical work activities.
saftey
This document discusses electrical safety hazards in the office and provides solutions to address them. It identifies hazards such as damaged extension leads, inserting objects into office machines, faulty appliances, and overloading outlets. To address these, it recommends securing extension leads, following safe procedures for clearing jams, inspecting and tagging appliances, and discouraging the overuse of adapters. The document also lists general electrical hazards like currents being invisible, unqualified work, and working in wet or confined spaces.
Self protective stun gun in delhi
This document discusses stun guns available for purchase in Delhi, India. It introduces stun guns as electrical self-defense devices that use high voltage to immobilize attackers for a period of time without causing serious injury. It then lists the varieties of stun guns available and their key features, such as different shapes, colors, fast and easy operation, and attractive designs. Finally, it emphasizes that stun guns are a best option for women's safety given rising crime rates and their ease of use and carry.
Robot Sensing System-4
A magnetostrictive sensor uses magnetostriction, the change in shape of a ferromagnetic material when placed in a magnetic field, to measure linear position. It senses the position of a permanent magnet along a magnetostrictive waveguide. Applying a current pulse generates an ultrasonic wave at the magnet's location via the Wiedemann effect. As the wave travels, it is detected using the reverse Villari effect to measure the time of flight and determine the distance to the magnet. Magnetostrictive sensors provide non-contact linear measurement without wear limitations.
Mobile charging Using Ratio
This document describes a mobile charging system that uses a ratio (wheel) to generate electricity from kinetic energy and charge a mobile phone. The main components are a ratio, wire, dynamo, pulley, diverter, and cable. As the ratio spins, it causes the dynamo to rotate within a magnetic field to produce alternating current that travels through the wires and charges a connected mobile phone. The advantages are mobile charging without electricity and no damage during charging or reversing. Future improvements could allow multiple phones to charge simultaneously.
Fluke India - Clamp Meters
The presentation explains all that you need to know about Clamp Meters.
Fluke India is a leader in the manufacture, distribution and service of electronic test tools and software.
L42 instruments
The document discusses moving iron type instruments, which have attraction and repulsion types. They work by having a soft iron vane that moves when current flows through a coil, with the attraction type moving towards the stronger magnetic field and the repulsion type having two soft iron rods that repel each other. Moving iron type instruments are cheap, sturdy, and reliable but have less precision for DC measurements due to iron hysteresis. Dynamo type wattmeters also measure power by having the torque produced by the current proportional to the voltage times the cosine of the phase angle.
WORKING OF PMMC INSTRUMENTS
This document describes the construction and working of a permanent magnet moving coil (PMMC) instrument. It consists of a fixed magnet and a movable coil mounted on a frame. Current passing through the coil experiences a torque due to the magnetic field, causing it to deflect. The coil is connected to a pointer and scale to display measurements. PMMC instruments can be used as ammeters or voltmeters and have advantages like high accuracy, uniform scale, and efficient damping. Their main disadvantage is that they can only be used for DC circuits.
Ohm's law
The document provides information about Ohm's Law and electrical circuits. It includes:
1) An explanation of Ohm's Law which states that current is directly proportional to voltage and inversely proportional to resistance.
2) Examples of calculating current, voltage, and resistance using Ohm's Law.
3) A discussion of how resistance affects current and the relationship between electric current and its effects on the human body.
Electrical engineering
Electromagnetic relays automatically sense faults and isolate faulty sections by opening circuit breaker contacts. There are two main types of electromagnetic relays: attracted armature and solenoid/plunger. Attracted armature relays use a counterweighted armature that bridges contacts when a fault increases current enough to attract the armature. Solenoid/plunger relays use a solenoid to attract a plunger that closes trip contacts when current exceeds the pickup value. Induction relays use electromagnetic induction to rotate a disc between electromagnets producing torque from alternating fluxes. Thermal relays use a bimetallic strip heated by overcurrent in a coil; the different expansion rates of the metals cause the strip to
EEG Artefact
This document discusses different types of artifacts that can occur during an EEG recording, including physiological, electrical, and environmental artifacts. Physiological artifacts are those generated from the patient's body and can include eye movement, muscle activity, ECG interference, swallowing, sweating, pulse, and respiration. Electrical artifacts may result from poor electrode connections or equipment issues. Environmental artifacts are caused by external sources like fluorescent lights, fans, or air conditioners that can induce 50Hz noise. The document provides examples of each type and recommends techniques for eliminating or reducing artifacts, such as proper grounding, shielding, electrode placement and impedance checks.
Protective stun gun in mudari
Stun Gun is an electric device which immobilize the attacker for a time. Stun gun works very fast. Latest Store deals original and branded gadgets.
Robot Sensing Systems - 1
This document summarizes three transducers: a potentiometer, LVDT, and resolver. A potentiometer converts rotational or linear displacement into a potential difference based on the position of a wiper along a resistor. An LVDT translates linear motion into electrical signals using a movable core within primary and secondary coils. It determines displacement by measuring the induced voltage. A resolver measures rotational degrees using a rotating shaft to induce voltages on stationary coils, producing sine and cosine feedback currents whose magnitudes indicate the shaft angle.
moving iron instrument
Moving iron instruments are the most common type of ammeter and voltmeter used for laboratory or switchboard applications involving power frequencies. They can measure current and voltage with accuracy needed for most engineering works, and are cheaper than other types of AC instruments providing the same level of accuracy. Moving iron instruments are classified as either attraction type or repulsion type based on how the moving iron component moves within the instrument's coil in response to the magnetic field produced by the measured current or voltage.
Measuring instrumentsppt2
In this presentation, i have explain the role of instruments, its working principle with suitable examples.
its application and how a student can learn more about instruments.
Faraday's experiment report
This experiment report details an experiment demonstrating Faraday's Law of Induced Electromotive Force. The experiment used a socket, generator, two solenoids, a U-shaped magnet, and voltmeter connected in a circuit. When the generator was turned on and off, creating a changing magnetic field, a brief induced current was observed on the voltmeter, supporting Faraday's Law that a changing magnetic flux induces a current.
Lunchontheskyscraper
1) The document presents several historical photographs taken in the 1930s depicting workers during the construction of skyscrapers in New York City between 1920-1935.
2) The first photograph is titled "Lunch atop a Skyscraper" and was taken by photographer Charles Ebbets on September 29, 1932 on the 69th floor of the GE Building in Rockefeller Center.
3) Many of the images are part of the Bettmann collection, which contains over 11 million photographs including important historical photos of the United States, and is now owned by Corbis which is owned by Bill Gates.
Therapythorugh Love
This 3 sentence summary provides the high-level information from the document:
The document is a slide show produced by Patrick Notley, a German photographer who is autistic, to share beauty with the world and help overcome stigma by sending the slide show around the globe.
Bestpictures
The document lists the winners of the 2007 Best Pictures on the Internet Awards as voted on by users of the website www.whatatop.com, including the top rated pictures for categories like best natural scenery both open and closed spaces, best urban landscape, best wildlife photo, and best street painting, with the overall best global picture for 2007 receiving a rating of 92.6 out of 100.
Russian Cakes
Ruske svadbene torte are wedding cakes made by Zhanna from St. Petersburg that use no plastics or artificial ingredients, with everything in the cakes being edible.
My New Car
The document introduces the Bugatti Veyron, a unique automobile produced by Volkswagen. It has a W16 engine configuration producing 1001 horsepower. It can accelerate from 0-100 km/h in 2.5 seconds, and reach a top speed of 405 km/h, making it one of the fastest production cars ever made. At top speed, it travels 113 meters in one second. While expensive at €1.23 million, it far surpasses the performance of even ultra-high performance sports cars from competitors like McLaren and Koenigsegg.
Momentsofreason
Old age can be a fruitful time of harvest for those who remain wise and optimistic, rather than seeing it as a winter. Staying amazed allows one to delay growing old. The most important decisions in life are made in one's late teens and early twenties. Old age arrives suddenly like snow, and one learns to remain young by growing old. While abilities decline with age, old age also embellishes life experiences. People tend to shed negative traits in old age if they no longer serve a purpose. There are four periods in a man's life defined by his relationship to Santa Claus, and being older also means one is younger than they will ever be again.
More Related Content
What's hot
saftey
This document discusses electrical safety hazards in the office and provides solutions to address them. It identifies hazards such as damaged extension leads, inserting objects into office machines, faulty appliances, and overloading outlets. To address these, it recommends securing extension leads, following safe procedures for clearing jams, inspecting and tagging appliances, and discouraging the overuse of adapters. The document also lists general electrical hazards like currents being invisible, unqualified work, and working in wet or confined spaces.
Self protective stun gun in delhi
This document discusses stun guns available for purchase in Delhi, India. It introduces stun guns as electrical self-defense devices that use high voltage to immobilize attackers for a period of time without causing serious injury. It then lists the varieties of stun guns available and their key features, such as different shapes, colors, fast and easy operation, and attractive designs. Finally, it emphasizes that stun guns are a best option for women's safety given rising crime rates and their ease of use and carry.
Robot Sensing System-4
A magnetostrictive sensor uses magnetostriction, the change in shape of a ferromagnetic material when placed in a magnetic field, to measure linear position. It senses the position of a permanent magnet along a magnetostrictive waveguide. Applying a current pulse generates an ultrasonic wave at the magnet's location via the Wiedemann effect. As the wave travels, it is detected using the reverse Villari effect to measure the time of flight and determine the distance to the magnet. Magnetostrictive sensors provide non-contact linear measurement without wear limitations.
Mobile charging Using Ratio
This document describes a mobile charging system that uses a ratio (wheel) to generate electricity from kinetic energy and charge a mobile phone. The main components are a ratio, wire, dynamo, pulley, diverter, and cable. As the ratio spins, it causes the dynamo to rotate within a magnetic field to produce alternating current that travels through the wires and charges a connected mobile phone. The advantages are mobile charging without electricity and no damage during charging or reversing. Future improvements could allow multiple phones to charge simultaneously.
Fluke India - Clamp Meters
The presentation explains all that you need to know about Clamp Meters.
Fluke India is a leader in the manufacture, distribution and service of electronic test tools and software.
L42 instruments
The document discusses moving iron type instruments, which have attraction and repulsion types. They work by having a soft iron vane that moves when current flows through a coil, with the attraction type moving towards the stronger magnetic field and the repulsion type having two soft iron rods that repel each other. Moving iron type instruments are cheap, sturdy, and reliable but have less precision for DC measurements due to iron hysteresis. Dynamo type wattmeters also measure power by having the torque produced by the current proportional to the voltage times the cosine of the phase angle.
WORKING OF PMMC INSTRUMENTS
This document describes the construction and working of a permanent magnet moving coil (PMMC) instrument. It consists of a fixed magnet and a movable coil mounted on a frame. Current passing through the coil experiences a torque due to the magnetic field, causing it to deflect. The coil is connected to a pointer and scale to display measurements. PMMC instruments can be used as ammeters or voltmeters and have advantages like high accuracy, uniform scale, and efficient damping. Their main disadvantage is that they can only be used for DC circuits.
Ohm's law
The document provides information about Ohm's Law and electrical circuits. It includes:
1) An explanation of Ohm's Law which states that current is directly proportional to voltage and inversely proportional to resistance.
2) Examples of calculating current, voltage, and resistance using Ohm's Law.
3) A discussion of how resistance affects current and the relationship between electric current and its effects on the human body.
Electrical engineering
Electromagnetic relays automatically sense faults and isolate faulty sections by opening circuit breaker contacts. There are two main types of electromagnetic relays: attracted armature and solenoid/plunger. Attracted armature relays use a counterweighted armature that bridges contacts when a fault increases current enough to attract the armature. Solenoid/plunger relays use a solenoid to attract a plunger that closes trip contacts when current exceeds the pickup value. Induction relays use electromagnetic induction to rotate a disc between electromagnets producing torque from alternating fluxes. Thermal relays use a bimetallic strip heated by overcurrent in a coil; the different expansion rates of the metals cause the strip to
EEG Artefact
This document discusses different types of artifacts that can occur during an EEG recording, including physiological, electrical, and environmental artifacts. Physiological artifacts are those generated from the patient's body and can include eye movement, muscle activity, ECG interference, swallowing, sweating, pulse, and respiration. Electrical artifacts may result from poor electrode connections or equipment issues. Environmental artifacts are caused by external sources like fluorescent lights, fans, or air conditioners that can induce 50Hz noise. The document provides examples of each type and recommends techniques for eliminating or reducing artifacts, such as proper grounding, shielding, electrode placement and impedance checks.
Protective stun gun in mudari
Stun Gun is an electric device which immobilize the attacker for a time. Stun gun works very fast. Latest Store deals original and branded gadgets.
Robot Sensing Systems - 1
This document summarizes three transducers: a potentiometer, LVDT, and resolver. A potentiometer converts rotational or linear displacement into a potential difference based on the position of a wiper along a resistor. An LVDT translates linear motion into electrical signals using a movable core within primary and secondary coils. It determines displacement by measuring the induced voltage. A resolver measures rotational degrees using a rotating shaft to induce voltages on stationary coils, producing sine and cosine feedback currents whose magnitudes indicate the shaft angle.
moving iron instrument
Moving iron instruments are the most common type of ammeter and voltmeter used for laboratory or switchboard applications involving power frequencies. They can measure current and voltage with accuracy needed for most engineering works, and are cheaper than other types of AC instruments providing the same level of accuracy. Moving iron instruments are classified as either attraction type or repulsion type based on how the moving iron component moves within the instrument's coil in response to the magnetic field produced by the measured current or voltage.
Measuring instrumentsppt2
In this presentation, i have explain the role of instruments, its working principle with suitable examples.
its application and how a student can learn more about instruments.
Faraday's experiment report
This experiment report details an experiment demonstrating Faraday's Law of Induced Electromotive Force. The experiment used a socket, generator, two solenoids, a U-shaped magnet, and voltmeter connected in a circuit. When the generator was turned on and off, creating a changing magnetic field, a brief induced current was observed on the voltmeter, supporting Faraday's Law that a changing magnetic flux induces a current.
What's hot (15)
Viewers also liked
Lunchontheskyscraper
1) The document presents several historical photographs taken in the 1930s depicting workers during the construction of skyscrapers in New York City between 1920-1935.
2) The first photograph is titled "Lunch atop a Skyscraper" and was taken by photographer Charles Ebbets on September 29, 1932 on the 69th floor of the GE Building in Rockefeller Center.
3) Many of the images are part of the Bettmann collection, which contains over 11 million photographs including important historical photos of the United States, and is now owned by Corbis which is owned by Bill Gates.
Therapythorugh Love
This 3 sentence summary provides the high-level information from the document:
The document is a slide show produced by Patrick Notley, a German photographer who is autistic, to share beauty with the world and help overcome stigma by sending the slide show around the globe.
Bestpictures
The document lists the winners of the 2007 Best Pictures on the Internet Awards as voted on by users of the website www.whatatop.com, including the top rated pictures for categories like best natural scenery both open and closed spaces, best urban landscape, best wildlife photo, and best street painting, with the overall best global picture for 2007 receiving a rating of 92.6 out of 100.
Russian Cakes
Ruske svadbene torte are wedding cakes made by Zhanna from St. Petersburg that use no plastics or artificial ingredients, with everything in the cakes being edible.
My New Car
The document introduces the Bugatti Veyron, a unique automobile produced by Volkswagen. It has a W16 engine configuration producing 1001 horsepower. It can accelerate from 0-100 km/h in 2.5 seconds, and reach a top speed of 405 km/h, making it one of the fastest production cars ever made. At top speed, it travels 113 meters in one second. While expensive at €1.23 million, it far surpasses the performance of even ultra-high performance sports cars from competitors like McLaren and Koenigsegg.
Momentsofreason
Old age can be a fruitful time of harvest for those who remain wise and optimistic, rather than seeing it as a winter. Staying amazed allows one to delay growing old. The most important decisions in life are made in one's late teens and early twenties. Old age arrives suddenly like snow, and one learns to remain young by growing old. While abilities decline with age, old age also embellishes life experiences. People tend to shed negative traits in old age if they no longer serve a purpose. There are four periods in a man's life defined by his relationship to Santa Claus, and being older also means one is younger than they will ever be again.
When Autos Were Art
The short document is written in a language I do not understand. It appears to be a foreign language title or phrase, but I am unable to determine the topic or main ideas being conveyed due to the language barrier.
Viewers also liked (8)
Similar to Hi Voltage Shock
Controlling Electrical Hazards 03
This document discusses controlling electrical hazards in the workplace. It begins by outlining some electrical hazards like electric shock, static electricity hazards, and how to protect against them. It then discusses what can cause electrical shocks and their effects on the human body depending on voltage and current. Next, it covers static electricity hazards and some protections against electrical hazards like insulation, guarding, grounding, circuit protection devices, safe work practices, and common dos and don'ts. Overall, the document provides guidance on identifying and preventing electrical hazards.
Electrical Shock.
This document discusses electrical safety. It notes that both current and voltage play a role in how dangerous electricity can be, with current being the main factor in bodily effects. It provides information on current thresholds and their associated effects on the human body. It also discusses safety considerations like ensuring proper insulation when working with electricity, avoiding contact with exposed wires, using protective equipment, establishing safety boundaries, and treating electrical burns. The key message is that electricity can be hazardous if safety protocols are not followed.
Lv arc-flash-paper
1) Arc flashes occur when there is a loss of insulation between energized electrical conductors, causing a flashover. They produce extremely high temperatures, loud sounds, and pressure waves that can cause serious injury.
2) The document discusses standards for analyzing and mitigating arc flash hazards, including defining flash protection boundaries and determining appropriate personal protective equipment based on potential incident energy levels.
3) ABB offers solutions for minimizing arc flash effects through selective coordination of circuit breakers and other protective devices to rapidly clear faults, reducing exposure to arc flash hazards for electrical workers.
Protection Devices and the Lightning
POWER SYSTEM PROTECTION
Protection Devices and the Lightning,. protection,
Lightning protection, Introduction
Air Break Switches
Disconnect switches
Grounding switches
Current limiting reactors
Grounding transformers
Co-ordination of protective devices
Grounding of electrical installations
Electric shock
Lightning protection
Lightning Arrestor
electrical safety_lecture.pdf
The document discusses electrical safety topics including physiological effects of electricity, susceptibility parameters, distribution of electrical power, isolated power systems, macroshock and microshock hazards, electrical safety codes and standards, ground fault circuit interrupters, equipment design, and electrical safety testing. It covers electrical hazards in clinical environments, thresholds for electrical stimulation and injury, factors that influence susceptibility to electrical currents, and mechanisms for protecting against macroshocks and conducting leakage currents safely.
ELECTRICAL SAFETY AWARENES.pdf
The document discusses electrical safety hazards and precautions in construction. It notes that electrocutions are a leading cause of death in construction, accounting for 12% of fatalities annually. Over 30,000 non-fatal shocks also occur each year. It then defines various electrical terms and describes the types of burns, shocks, and electrocutions that can result from electrical accidents. The document outlines safety practices like lockout/tagout procedures, proper use of ground fault circuit interrupters and personal protective equipment, and safe operation of electrical tools to prevent injuries and fatalities from electricity on work sites.
ELECTRICAL HAZARD.pptx
An electrical hazard is a dangerous condition where a worker could make contact with energized equipment and be injured. Some common electrical hazards include overhead power lines, damaged tools and equipment, exposed electrical parts, improper grounding, inadequate wiring, damaged insulation, and wet conditions. Exposure to electrical hazards can cause electric shock, arc flash burns, and death. Workers must use protective equipment like gloves, shields and flame resistant clothing to protect themselves from electrical injuries.
electricity and human body
The document discusses the basics of electricity including definitions of ampere, volt, ohm, conductor, insulator, and dielectric. It then covers the harmful effects electricity can have on the human body, including burns, shocks, and internal injuries. Different types of burns are examined such as entrance and exit wounds, arc burns, and thermal contact burns. Electrical safety practices are also mentioned such as grounding and safety equipment.
ENERGY DEVICES IN SURGERY
Electrosurgery devices use electrical energy to cut, coagulate, and ablate tissue. Common devices include monopolar and bipolar electrosurgery, which use radiofrequency energy. Ultrasonic devices like the Harmonic scalpel use ultrasonic vibrations for cutting and coagulation without electricity. Other technologies for tissue effects include vessel sealing devices, lasers which use light energy, cryosurgery using extreme cold, and microwave ablation. Proper use and monitoring of electrosurgical devices is important to prevent unintended tissue damage and burns.
Electrical_Safety_1711951651ruehdnejdjrjdjeke
The document discusses electrical hazards and safety. It describes the risks of electrical shock and how the effects on the body depend on factors like current pathway and amount. Electrical shock can occur when a worker comes into contact with both an energized conductor and a grounded object. The document also discusses types of electrical burns, arc flash hazards, battery hazards, safe distances from power lines, and the use of ground fault circuit interrupters to prevent electric shock.
Lightning Arrester Working Principle & Types
Lightning Arrester Working Principle & Types Lightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester WorkingLightning Arrester Working
Lightning arrester
The document discusses lightning arresters, including their working principle, types, and advantages/disadvantages. Lightning arresters protect electrical equipment by diverting high voltage surges from lightning strikes or nearby objects to ground. They break down at a preset voltage to provide a path of least resistance to ground. Common types include rod gap, sphere gap, horn gap, and metal oxide arresters. Lightning arresters help reduce property damage and protect outdoor substation equipment and power lines from damage from lightning strikes. However, they require more space and have a higher installation cost than some alternatives.
Electrical safety13
Electrical safety is an important issue that can prevent fatalities and injuries. Each year, contact with overhead power lines results in deaths and property damage. Working near electricity puts many workers at risk, including equipment operators, emergency responders, and those on ladders or scaffolds. Even small amounts of electricity can cause harm, with just 75mA potentially causing death. Proper safety training and coordinating work with utilities can help prevent electrical accidents.
Electrical safety
This document discusses electrical safety and hazards. It defines key electrical terms and outlines major causes of electrical accidents such as work on live circuits and damaged power cables. Electrical hazards like shock and burns are explained along with minimizing risks through grounding, locking out equipment, and using personal protective equipment. Precautions for portable generators and avoiding unsafe acts are also covered.
ELECTRICAL SAFETY LINTEX
This document provides an outline for an electrical safety awareness training for employees of Lintex International Limited in Lagos, Nigeria. The training covers basic concepts of electricity, hazard recognition, effects of electricity on the human body, electrical hazard protections, how to respond to problems, and responsibilities of supervisors and employees. It aims to raise awareness of potential electrical hazards and instruct employees on recognizing hazards and preventing them in the workplace.
Electrical safety slideshare
This document discusses electrical safety and the causes of electrical accidents. It notes that 15-16 people die every day in India due to electrocution. The major causes of electrical accidents are listed as carelessness, misuse, lack of training, and negligence. The document explains what causes electrical shock and the effects of electric current passing through the human body, such as muscular contraction, breathing difficulty, cardiac arrest, and death. It provides safety guidelines and regulations to prevent electrical accidents.
Electrical shock.ppt
Electrical safety is paramount when working with electricity. Proper lockout/tagout procedures must be followed to de-energize equipment before inspection or repair. Electrical shock can occur when a person provides a path for current to flow through their body, and even small currents above 8mA can be dangerous. It is not the voltage but the current that determines the severity of shock. Following safe work practices like using GFCIs, proper grounding and wiring, insulating tools, and wearing PPE can help prevent electrical injuries and fatalities. Planning, inspection, and training are also critical aspects of electrical safety.
Elect. presentation (04).ppt
This document discusses electrical safety hazards and prevention methods. It summarizes the primary hazards of electricity as electric shock, fire, explosion and burns. It then discusses the severity of electric shock depending on duration, current, path of flow and body resistance. Methods to prevent shock include isolation, current limitation using ELCBs, low voltage systems, double insulation, and proper earthing. Regular inspection and maintenance of electrical installations is important to prevent accidents from shock, fire or burns. Proper safety equipment, training and procedures are required when working with electricity.
eee
This document discusses electrical safety and protection. It begins by outlining electrical injuries and their classification. Electrocutions have decreased from the 1970s but remain a leading cause of occupational fatalities. The document then classifies electrical exposures as high voltage (>600V) or low voltage (<600V) and describes various electrical hazards like shock, burns, falls and fires. It provides examples of accidents caused by these hazards. Finally, it discusses controlling electrical hazards through proper grounding, using GFCIs, avoiding overloads, inspecting cords and replacing damaged equipment.
1728511503435_Electrical Safety Analyzer.ppt
The document discusses various topics related to electrical safety. It covers physiological effects of electricity, susceptibility parameters, distribution of electrical power including isolated power systems, macroshock and microshock hazards, electrical safety codes and standards, and protection methods like grounding systems, isolated power distribution, and ground fault circuit interrupters. It provides details on thresholds for electrical stimulation, respiratory paralysis, ventricular fibrillation and burns based on current levels.
Similar to Hi Voltage Shock (20)
More from George Martin
Old Memories
This document discusses how many famous Hollywood actors from the 1940s-1960s served in World War 2, including Clark Gable who flew bombing missions for the Army Air Force and Audie Murphy who received numerous medals for his service as a U.S. soldier. In contrast, it notes that today's celebrities often criticize the U.S. and its leaders. It lists over a dozen classic Hollywood stars who fought in WWII rather than protest the country, and commends them for their patriotism and valor compared to modern celebrities.
Theworldlargestaircraft
The document provides information about the Antonov An-225 Mriya aircraft, including its specifications and dimensions. It is the largest aircraft ever built, with a length of 84 meters and wingspan of 88.4 meters. It has a maximum takeoff weight of 600,000 kg and is powered by 6 turbofan engines, each producing over 50,000 pounds of thrust. The An-225 was designed as a strategic airlift cargo carrier and can carry payloads of up to 250,000 kg.
The+most+stunning+photos+of+2012!
The document presents a collection of the most beautiful and breathtaking photos taken in 2012. It includes photos of a seahorse inspecting a diver's watch, an illuminated snow tunnel in Russia, street art in Poland, Mount Rainier casting shadows on clouds, meditating monks at a waterfall, the southern lights from space, a pod of sleeping sperm whales, and more stunning natural landscapes and wildlife photos from around the world.
Photos historic
This document contains a collection of historical photographs from various time periods showcasing people and events from around the world, including images of Mary Smith waking workers before clocks, traffic in Berlin after the fall of the wall, and the construction of landmarks like the Christ The Redeemer statue and Eiffel Tower. The photographs provide a glimpse into life, culture, and history over the past few centuries.
Men and their_bb_qs
The document discusses grilling and cooking with natural gas. It encourages men to start grilling and provides tips on what to do with old computers and BBQs. The main focus is on men enjoying cooking outdoors with gas grills.
Marine photos1
David Doubilet was born in 1946 and began diving at age 8, spending 13 years photographing the New Jersey coast. His first photo was published by National Geographic in 1972, since then he has authored over 50 ocean life articles. In 2003, over 15,000 people visited his underwater photography exhibition in Lisbon, where he was considered the most famous underwater photographer, showcasing over 100 photos including a National Geographic story from 2002. Doubilet received his first prize, the Underwater Sara Prize from an Italian magazine, and honorable mentions from the American National Press Photographers Association.
Marina bay sands_hotel,_singapore
El Marina Bay Sands en Singapur es un complejo hotelero y de casino compuesto por tres torres unidas en la azotea. Tiene 2560 habitaciones que cuestan alrededor de $520 por noche, un casino con entrada de $60, y se espera que atraiga 18 millones de visitantes anualmente. Una de sus principales atracciones es el Skypark de 200 metros de altura con piscina, jardines y vistas panorámicas de 360 grados de Singapur.
Mans best friend
This presentation is about dogs and man's relationship with dogs. It contains several quotes that express how dogs are man's best friend and provide unconditional love and companionship. Dogs are always happy to see their owners and know their moods without words being said. They are joyful, loyal companions who make people's lives richer.
Man inspacesjb
SamsChoice Productions is presenting a new production called "Man in space...the impossible dream...". The production is being proudly presented by SamsChoice Productions.
Lovemewithallyourheart
The document is a short story or poem about an ending performance or show. It repeats that "that's all there is" and "no more" to emphasize that the show is over. It instructs the reader to "click the mouse" to close or finish the show.
Louis+armstrong
The document contains the lyrics to the song "What a Wonderful World" by Louis Armstrong. The song describes the natural beauty of the world from the perspective of the singer, mentioning blue skies, white clouds, trees of green and red roses. It discusses the colors of the rainbow in the sky and on people's faces. The singer observes friends greeting each other and babies learning and growing. The song expresses gratitude for the wonderful world.
Mil hist wwii the long patrol
The 2nd Marine Raider Battalion, led by Lieutenant Colonel Evans Carlson, conducted a month-long patrol through the jungle of Guadalcanal from November 6th to December 3rd, 1944. Their goal was to locate and destroy Japanese forces under Colonel Shoji that were threatening the American perimeter. During intense firefights, the Raiders killed hundreds of Japanese soldiers while suffering 16 killed and 17 wounded themselves. They also captured weapons and discovered enemy positions. Though many Raiders contracted malaria and other diseases, they completed their mission and felt they had performed well as a unit despite the hardships endured.
London eye
The London Eye is a 443-foot tall Ferris wheel located in central London along the River Thames, consisting of 32 air-conditioned capsules that hold 32 people each and provide 30-minute trips offering panoramic views of London. On clear days, passengers can see as far as Heathrow Airport and Windsor Castle from the rotating capsules. At night, landmarks like Big Ben, Westminster Abbey, and Tower Bridge are illuminated against the darkened city landscape.
La terre-vue-du-ciel
The Yann Arthus-Bertrand project titled "Earth seen from the Sky" documented aerial photographs of landscapes and human settlements around the world. It has been hugely successful, selling over 3 million copies in 24 countries. The book features stunning aerial photographs capturing scenes from unusual angles, showing the symmetry and colors of the Earth.
Las joyas de_la_corona_britanica_marta
Este documento presenta una lista de las joyas reales que pertenecen a la familia real británica, incluyendo coronas, tiaras, collares, pendientes, brazaletes y anillos. Muchas de estas joyas históricas han sido usadas por monarcas británicos a lo largo de los siglos y ahora se mantienen en la Torre de Londres.
Lake superior
Lake Superior is the largest of the Great Lakes by surface area, containing 10% of the earth's fresh surface water. Named Gichigami by the Ojibwe Indians meaning "big water", it has a surface area greater than several U.S. states combined and contains 3 quadrillion gallons of water. With underwater visibility up to 100 feet and waves reaching 30 feet, Lake Superior is renowned for its clarity, size, and power.
More from George Martin (20)
Recently uploaded
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Recently uploaded (20)
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Hi Voltage Shock
- 1. High Voltage Shock & Arc Cable blown away when wire cutters make contact with conductor
- 3. High Voltage Shock Physical Effects of Electrocution
- 4. High Voltage Shock Entry point of High Voltage
- 5. High Voltage Shock Effects ~ Arcing to Grounded Conduits (2)
- 6. High Voltage Shock Arcing Effects ~ Body to Grounded Conduits (2)
- 7. High Voltage Shock Arcing Effects ~ Body to Grounded Conduit
- 9. High Voltage Shock Entry and Exit Wounds