The document outlines a two-day hands-on workshop on data communication, networking, and TCP/IP troubleshooting scheduled in Perth on May 18-19, 2015, and Brisbane on May 21-22, 2015. Participants will receive practical training in setting up and troubleshooting various communication systems, and early bird registration offers discounts and free ebooks. The workshop is suitable for engineers and technicians in industrial communication fields, providing substantial knowledge and skills to enhance their technical capabilities.

1. Register NOW: Email the registration form to us at idc@idc-online.com
For more information contact 1300 138 522 or visit www.idc-online.com
Hands-On
Data Communication,
Networking and TCP/IP
Troubleshooting
Perth
18 & 19 May 2015
BRISBANE
21 & 22 May 2015
Been to an IDC workshop before?
- Attend this workshop and you’ll receive 5% off the registration price!
TechnologyTraining that Works
Edwin Wright
B.Sc B.E. (Hons) (Elec) MIPENZ
Consulting Engineer
A 2-day practical workshop presented by:
AUSTRALIA • CANADA • india • IRELAND
Malaysia • NEW ZEALAND • SINGAPORE • SOUTH AFRICA
UNITED KINGDOM • UNITED STATES • VIETNAM
EARLY BIRD
BOOKING OFFER
TOTAL VALUE TO YOU - $835
Book by 20 April 2015 and
you will receive 20% off the full
registration price + 4 ebooks
each with hundreds of pages of
engineering knowledge
4-for-3
BOOKING OFFER
plus
our
Only
$
1995 per person
including GST
You will learn how to:
• Set up, configure and troubleshoot RS-232 and 2-wire as well as 4-wire
RS-485 links
• Set up and configure basic Ethernet networks containing hubs, switches
and routers, and troubleshoot these networks down to the packet level
• Configure IP parameters, and do basic TCP/IP troubleshooting down to the
packet level by means of DOS and Windows utilities such as IP address
and port scanners as well as protocol analysers
• Troubleshoot Modbus serial and Modbus TCP systems down to byte level
• Set up IEEE802.11 access points in infrastructure and point-to-point mode,
do site surveys and ‘sniff’ packets
• Implement authentication and encryption on IEEE 802.11 wireless LANs
who should attend:
This workshop is designed for personnel with a need to understand the
techniques required to use and apply industrial communications technology as
productively and economically as possible. This includes engineers and
technicians involved with:
• Consulting
• Control and instrumentation
• Control systems
• Design
• Electrical installations
• Instrumentation
• Maintenance supervisors
• Process control
• Process development
• Project management
• SCADA and telemetry systems
• Practical Industrial Networking
Engineers and Technicians
• Practical Troubleshooting and
Problem Solving of Ethernet
Networks
• Practical TCP/IP and Ethernet
Networking for Industry
• Practical Fieldbus, DeviceNet and
Ethernet for Industry

2. Edwin has over 40 years of practical experience in the planning, design,
construction and operation of telecommunications systems, data
networks, SCADA and Ethernet systems. He has also been involved as
Project Manager on many projects and has a passion for technology
topics.
Edwin has published numerous papers and consulted widely on Ethernet, data communications
and telecommunications issues in the USA, Canada, UK, Australia and New Zealand. Over the
past 19 years more than 20,000 engineers and technicians have attended his workshops
worldwide. Delegates attending his workshop will benefit from his tremendous knowledge and
enthusiasm for the topics and his entertaining instructing style. When not working in the
communications world, Edwin relaxes by reading and writing on technology issues at his
beachside home.
Hands-On Data Communication,
An intensive, practical 2-day workshop presented by
Edwin Wright B.Sc B.E. (Hons) (Elec) MIPENZ
Consulting Engineer
Free reference manual
as a hard-copy and eBook (Valued at $223.90)
Our delegates don’t just receive photocopied notes!
You will receive the comprehensive fully illustrated reference manual,
as a hard-copy and eBook version, filled with hundreds of pages of
tables, charts, figures and handy hints.
Discount Offer
SAVE $1995
* discounted and free registration to be
used for the same workshop
in the same venue
Book four delegates
pay for three!
Register three people on a
public two-day workshop and
receive your fourth registration
FREE
About IDC Technologies
Visit our WEB SITE
www.idc-online.com to download
FREE software and technical information
With a portfolio of over 300 workshops
specialising in the fields of industrial data
communications, electrical and mechanical
engineering, automation and control, we have
trained over 500,000 engineers, technicians
and technologists over the last 20 years.
Wehaveanenthusiasticteamofprofessionals
in offices conveniently located around the
world, who are committed to providing the
highest quality of engineering and technical
training.
On-Site Training
All IDC Technologies training workshops are
available on an on-site basis, presented at
the venue of your choice, saving delegates
travel time and expenses, thus providing
your company with even greater savings.
SAVE MORE THAN 50% OFF
the per person cost!
2-day courses start from $6,000
FOR UP TO 6 PEOPLE and can be
customised to your needs.
Have the training delivered
WHEN AND WHERE you need it!
For more information or a FREE detailed
proposal contact:
Kevin Baker on 1300 138 522 or
email: training@idc-online.com
PLUS 5 eBooks of
your choice!
Every delegate will also receive
5 eBooks of their choice
from IDC’s technical library
– valued at $420!
the workshop
Data communication is given high priority in today’s industrial environment. This workshop is
designed to be hands-on, providing the participants with essential knowledge and helping
them to understand and troubleshoot systems.
This is a comprehensive two-day hands-on workshop that covers practical aspects of data
communication such as serial communications, Ethernet networking, TCP/IP, Modbus,
wireless communications and security.
This workshop is for enthusiastic engineers and technicians who wish to develop and enhance
their practical knowledge in the field of data communications and networking. It will help them
to understand the concepts behind data transmission, the various protocols involved, and the
topologies that govern data exchange among various systems in industry. It will also equip
them with the skills and tools to design and/or maintain these systems on an ongoing basis.
Pre-requisites
A basic working knowledge of industrial communications and applications will be useful.
Real-life experience with equipment and hands-on testing will enable the workshop to be
placed in context.
practical sessions
This is a practical, hands-on workshop enabling you to work through exercises which reinforce
the concepts discussed.
This workshop is heavily (~90%) hands-on – students will work in pairs with a
computer.
To gain full value from this workshop, please bring your laptop/notebook computer.

3. Networking and TCP/IP Troubleshooting
The program
Day ONE
SERIAL DATA COMMUNICATIONS
• Asynchronous serial communication basics
PRACTICAL EXERCISES
• RS-232, RS-485 basics
- Setting up the software
- RS-232 basics
- RS-232 point-to-point communication
- RS-232 via virtual null modem
- RS-485 basics (2W and 4W) using
Listen 32 software, voltmeter and
oscilloscope (if available)
ETHERNET AND TCP/IP NETWORKING
NETWORKING BASICS (BRIEF REVIEW)
• Ethernet
• TCP/IP protocol suite
• Internet layer (OSI layer 3) protocols: IP,
ARP, ICMP
• Host-host layer (OSI layer 4) protocols: TCP,
UDP
• Application layer (OSI layer 5/6/7)
protocols: FTP, HTTP, Telnet
• Utilities
• Network components
NETWORK CONSTRUCTION
PRACTICAL EXERCISES
• Constructing a simulated Wide Area
Network simulation with hubs/switches
and pre-configured Cisco 2500 routers
• IP configuration (IP addresses, subnet
masks, default gateways) of hosts
BASIC SYSTEM CHECKS
PRACTICAL EXERCISES
• IP configuration checks (ipconfig, wntipcfg)
• Router configuration checks using IOS
commands via Telnet
• Switch configuration checks using browser
• Connectivity checks (ping, arp, tracert)
• Name resolution (hosts file, Lmhosts file)
TROUBLESHOOTING THE MEDIUM
PRACTICAL EXERCISES
• Fiber connectivity – basic checks
• Cat5 connectivity (damaged and mis-wired
cabling, with cable tester)
TROUBLESHOOTING AT LAYER 2
PRACTICAL EXERCISES
• Ethernet packet analysis with Wireshark
• Checking Ethernet NIC driver configuration
TROUBLESHOOTING AT LAYER 3
PRACTICAL EXERCISES
• Checking stack operation with loop-back
test
• Tracing Ethernet packet contents between
subnets with Wireshark
• Detecting duplicate IP addresses
• Automatic IP address allocation (DHCP
server down)
Day TWO
ETHERNET AND TCP/IP NETWORKING
(cont.)
TROUBLESHOOTING AT LAYER 4
PRACTICAL EXERCISES
• Checking TCP connections, observing TCP
sequence numbers and
acknowledgements with Wireshark
• Scanning ports on hosts with advanced
ports scanner
• Scanning ports on hosts with NMap
• Checking TCP/UDP delay and data rate
between hosts on WAN with IXIA
QuickCheck
INDUSTRIAL PROTOCOLS: MODBUS
MODBUS SERIAL
• Basic client/server concept
• Addressing scheme
• Message structure
PRACTICAL EXERCISES
• Master/slave simulation over null modem
MODBUS TCP
• Basic concept
• Message structure
PRACTICAL EXERCISES
• Master/slave simulation over Ethernet and
TCP/IP
• Modbus Serial/TCP gateway (Moxa Nport
6110)
WIRELESS
• IEEE802.11 wireless LAN overview
PRACTICAL EXERCISES
• Setting up Cisco Aeronet access point
• Configuring an access point as workgroup
bridge to establish a point-to-point link
(wireless bridge) with two Cisco Aeronet
access points
• Sniffing wireless packets with Wireshark
• Quick site survey
• Measuring signal-to-noise ratio with
Netstumbler
SECURITY
• Basic security issues
• WPA2 encryption (AES)
• WPA2 authentication
- Personal mode
- Enterprise mode
PRACTICAL EXERCISES
• Enabling encryption (AES) on a wireless
LAN
• Authentication via RADIUS server
SUMMARY, OPEN FORUM
AND CLOSING
The fee for each workshop covers all materials
including workshop manual, lunches
and refreshments

4. ABN 78 003 263 189
Web Site:
www.idc-online.com
Email:
idc@idc-online.com
Mail:
IDC Technologies
PO Box 1093
West Perth WA 6872
Fax:
1300 138 533
Register
Now:
Enquiries:
Phone:
1300 138 522
Hands-on Data Communication, Networking and TCP/IP Troubleshooting
Workshop details
• Workshops start at 8:30am and finish at 5:00pm daily.
• Registration is from 8:00am on the first day.
• Theworkshopfeesareperdelegateandincludeareference
manual, handouts, lunches and all refreshments.
• Fullpaymentisrequiredpriortothecommencementofthe
workshop.
Early Bird BOOKING Offer
Please note that the Early Bird Booking Offer is only available
to those registrations received by 20 April 2015 and paid
prior to the commencement of the workshop.
Confirmation
Confirmation of receiving your registration will be sent within
48 hours. Official confirmation and details of the workshop
will be sent to you prior to the workshop date. Please wait for
official confirmation before making accommodation and/or
travel arrangements.
Cancellation
A fee of 20% will apply for written cancellations received
7-14 days prior to the commencement of the workshop.
Cancellations received less than 7 days prior to the workshop
are not refundable however substitutes are welcome.
Please Note
Venuestobeconfirmeduponregistration.Venuesaresubject
to change. Instructors may change without notice.
IDC Technologies has no affiliation with suppliers or
manufacturersandthereforepresentsacompletelyunbiased
factual view of the industry.
100% MONEY BACK GUARANTEE
IDC Technologies’ engineers have put considerable time and
experience into ensuring that you derive the maximum value
from each workshop. If you feel by lunch time of the first day
that the workshop is not appropriate, please let us know so
that we can arrange a 100% refund of your fee.
Privacy Information
If your address details are incorrect, or you wish to remove
your name from our mailing list, please contact us by phone,
fax or email.
At times we make use of lists that cannot be cross-checked
against our own database and you may receive a duplicate.
If so, please pass this on to an interested colleague.
Continuing Professional Development (CPD)
This program is designed to meet your continuing
professional development requirements. A certificate
documenting your attendance will be awarded at the
end of the workshop. This serves as important evidence
of your continuing professional commitment to your
career. This workshop may count towards fulfilling
your Engineers Australia CPD obligations – Engineers
Australia’s CPD Policy can be found at their website:
http://www.engineersaustralia.org.au/
Contact: Company Name:
Company Address:
Suburb: State: Post Code:
Phone: Fax: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Should you have more people interested in attending this workshop, please contact us via email: idc@idc-online.com
Delegate Details
Attendees:
Perth - 18 & 19 May 2015
IDC Technologies, West Perth
Brisbane - 21 & 22 May 2015
Hotel George Williams, Brisbane
Please register by 27 April
to avoid disappointment
Workshop Details
Register three people on a public two-day workshop and
receive your fourth registration FREE
* discounted and free registration to be used for the same
workshop in the same venue.
Discount offer - save $1995
- book 4 delegates, pay for 3!
Received a brochure in the mail
Received an email from IDC
Searched online (Google, Yahoo etc)
Recommended by a friend/colleague
Other (please specify) ________________________
______________________________________________
How did you hear about this
workshop? (PLEASE TICK)
1
3
BOOKING FOR ONE DELEGATE: $1995 x ______ delegates = $______________
BOOKING FOR four DELEGATES: $1995 x ______ delegates = $______________
The fourth participant is FREE
Early bird booking offer: (if booking on or before 20 April 2015)
YES, I qualify and would like to receive my 4 FREE eBooks
PLUS 20% OFF the registration price less 20% = $______________
Total = $______________
On the reverse of your card, above the signature,
is a security number. In order to authorise your
card transaction, we require the last 3 digits:
If the Cardholder's address
is not the same as shown
above please tick this box:
Please Note: Full payment is required prior to the commencement of the workshop.
Payment Details Note: Prices are INCLUSIVE of GST
I wish to pay by Cheque, made payable to IDC Technologies
Company Order Number: __________________________________
Please charge my Mastercard Visa Expiry Date: ____/_____
______________________________________________________________
Cardholder’s Name:
Cardholder’s Signature
My billing information is the same as above in 'DELEGATE DETAILS'
Please send invoice to: Company Name:
Company Address:
Suburb: State: Post Code:
billing information (PLEASE invoice to)
1
3