COPY THIS LINK INTO YOUR BROWSER FOR MORE INFORMATION: bit.ly/1Htp9ZC For project managers and engineers involved with hazardous processes, this workshop focuses on the management, planning and execution of automatic safety systems in accordance with IEC 61511, the newly released international standard for process industry safety controls. IEC 61511 has been recognised by European safety authorities and by USA based process companies as representing the best practices available for the provision of automatic safety systems. The new standard captures many of the well established project and design techniques that have been described since 1996 in ANSI/ISA standard S84 whilst introducing many newer principles based on the master standard IEC 615108. The newly released standard IEC 61511 (published in 3 parts) combines the principles of IEC 61508 and S84 into a practical and easily understood code of practice specifically for end users in the process industries. This workshop is structured into two major parts to ensure that both managers and engineering staff are trained in the fundamentals of safety system practices. The first part of the workshop, approx the first third, provides an overview of the critical issues involved in managing and implementing safety systems. WHO SHOULD ATTEND? Automation/machinery design engineers Control systems engineers Chemical or energy process engineers Instrument/electrical engineers and technicians Instrument suppliers technical staff Maintenance supervisors Project engineers and project managers COPY THIS LINK INTO YOUR BROWSER FOR MORE INFORMATION: bit.ly/1Htp9ZC

1. Technology Training that Works
Practical
Safety Instrumentation &
Emergency Shutdown Systems
for Process Industries
manchester
17 & 18 March 2015
Only £995 per person
excluding VAT
BOOKING OFFER
• Practical SCADA Systems for
Industry
• Practical Programmable Logic
Controller's (PLCs) for Automation
and Process Control
• Installation, Calibration and
Maintenance of Electronic
Instruments
• Best Practice in Process, Electrical
and Instrumentation Drawings and
Documentation
4-for-3
plus
our
BOOKING OFFER
Harvey T. Dearden
BSc CEng FIET FInstMC
MIMechE AFIChemE
A 2-day practical workshop presented by:
4 for 3 discount Offer - see registration form for details
EARLY BIRD
TOTAL VALUE TO YOU - £355
Book by 17 February 2015 and
you will receive 25% off the full
registration price + 4 eBooks
each with hundreds of pages of
engineering knowledge
what You will learn:
• What your company should be doing to manage safety control projects in
accordance with the international standards IEC 61508 and IEC 61511
• The meaning and tasks of "The Safety Life Cycle"
• How HAZOPS are done and how they are used to define safety functions
• To understand Safety Integrity Levels (SILs) and to set target values using
the methods described in IEC 61511
• How to identify what kind of instruments and PLCs must be used in
safety controls
• How networks can be safely used for protection systems
• How to design safety systems to meet SIL targets and avoid spurious trips
• How to calculate SIS failure rates and verify SIL performance
• To identify where your safety instrumentation practices may need
upgrading
who should attend:
• Automation design engineers
• Chemical or energy process engineers
• Control systems engineers
• Electrical engineers and technicians
• Instrument engineers and technicians
• Instrument suppliers technical staff
• Machinery design engineers
• Maintenance supervisors
• Project engineers and managers
AUSTRALIA • CANADA • india • IRELAND
Malaysia • NEW ZEALAND • SINGAPORE • SOUTH AFRICA
UNITED KINGDOM • UNITED STATES • VIETNAM
Register NOW: Email the registration form to us at uk@idc-online.com
For more information contact (020) 8335 4014 or visit www.idc-online.com

2. Practical Safety Instrumentation and Emergency discount Offer
Harvey has over 35 years’ experience in the process industries, having
worked for end users, contractors, vendors and consultants, and is
known for his expertise in process control and protection and related
risk assessment and management concerns. Latterly he worked as site
engineering manager for a major chemical company in the UK and now
has an independent consulting practice.
Harvey combines these varying perspectives with a real passion for the engineering discipline
and is the author of ‘Professional Engineering Practice: Reflections on the Role of the
Professional Engineer’. He is known to many through his involvement with the Institution of
Measurement and Control and his numerous articles in the technical press.
An engaging speaker, Harvey strives not to simply convey information, but to establish real
understanding of lasting value to the audience. With his extensive experience and excellent
communication skills, you will walk away from this workshop with valuable know-how that you
can apply immediately to your work.
the workshop
SAVE
£995
BUY Three
GET ONE FRE!
Register three people on a
public two-day workshop and
receive your fourth registration
FRE
* discounted and free registration to be
used for the same workshop
in the same venue
An intensive, practical 2-day workshop presented by
Harvey T. Dearden
BSc CEng FIET FInstMC MIMechE AFIChemE
About IDC Technologies
With a portfolio of over 300 workshops
specialising in the fields of industrial
data communications, telecommunications,
automation and control we have trained over
500,000 engineers, scientists and
technicians over the last 20 years.
We have an enthusiastic team of professionals
in offices conveniently located around the
world, who are committed to providing the
highest quality of engineering and technical
training.
Visit our WEB SITE
www.idc-online.com to download
FRE software and technical information
On-Site Training
All IDC Technologies training workshops are
available on an on-site basis, presented at
the venue of your choice, saving delegates
travel time and expenses, thus providing
your company with even greater savings.
SAVE MORE THAN 50% OFF
the per person cost!
2-day courses start from <£3,000
for up to 6 people, and can be
customised to your needs.
Have the training delivered
WHEN AND WHERE you need it!
For more information or a FRE detailed
proposal contact:
Kevin Baker on (020) 8335 4014 or
e-mail: training@idc-online.com
For project managers and engineers involved with hazardous processes, this workshop focuses
on the management, planning and execution of automatic safety systems in accordance with IEC
61511, the newly released international standard for process industry safety controls. (See over
for background to IEC 61511)
IEC 61511 has been recognised by European safety authorities and by USA based process
companies as representing the best practices available for the provision of automatic safety
systems. The new standard captures many of the well established project and design techniques
that have been described since 1996 in ANSI/ISA standard S84 whilst introducing many newer
principles based on the master standard IEC 615108. The newly released standard IEC 61511
(published in 3 parts) combines the principles of IEC 61508 and S84 into a practical and easily
understood code of practice specifically for end users in the process industries.
This new IDC workshop is structured into two major parts to ensure that both managers and
engineering staff are trained in the fundamentals of safety system practices. The first part of the
workshop, approx the first third, provides an overview of the critical issues involved in managing
and implementing safety systems.
Section 2
Selected detail topics
• Role of HAZOP studies and hazard
analysis
• Understanding SILs and their impact on
capital and operating costs
• SIL determination methods presented in
IEC 61511 with practical exercises
• Principles of safety PLCs and the types
available
• Planning and implementing the
application software
• Selecting instruments for SIS. The
meaning of safety-certified instruments
• Principles of fault tolerance and voting
architectures such as 1oo2 and 2oo3
• Using smart positioners to improve
testing performance
• Reliability analysis and sources of failure
rate data
• The benefits of diagnostic systems in
reducing test frequencies
• Installation, testing and modification of
the SIS
• Documentation and software tools
Section 1
A wide-ranging overview of the subject
• Risk management principles applied to
protection systems
• An introduction to IEC 61508 and
61511
• Principles and stages of the safety life
cycle
• The basics of an SIS and the meaning of
Safety Integrity Levels (SILs)
• The importance of setting SIL targets
and how this is done
• How to design the SIS to meet SIL
targets
• Why regular PLCs are not suitable for
safety duties
• Qualifying instruments for safety duties
• How to reduce spurious trips
• Essentials of maintenance and proof
testing
• Planning for compliance with IEC 61511

3. Shutdown Systems for Process Industries
Day ONE
Module 1
• Overview of safety instrumented systems
for managers
Module 2
• Introduction to IEC 61511 and the safety
lifecycle
Module 3
• Hazop methods and hazard analysis for
defining risk reduction requirements
Module 4
• Principles of risk reduction and safety
allocation
Module 5
• Practical SIL determination methods
based on IEC 61511
Day TWO
Module 6
• Practical SIS configurations for both
safety and availability targets
Module 7
• Practical selection of sensors and
actuators for safety duties
Module 8
• Practical reliability analysis methods and
programs to IEC 61511
Module 9
• Practical selection of safety controllers
Module 10
• Practical system integration and
application software for safety controllers
Module 11
• Practical documentation and validation of
SIS systems
Module 12
• Practical diagnostics and proof testing of
safety instrumentation
summary, open forum
and closing
The fee for each workshop covers all materials
including workshop manual, lunches
and refreshments
the program
free reference manual
as a hard-copy and eBook (Valued at £79.95)
Our delegates don’t just receive photocopied notes!
You will receive a comprehensive fully illustrated reference manual filled
with hundreds of pages of tables, charts, figures and handy hints.

4. Practical Safety Instrumentation and Emergency Shutdown Systems for Process Industries
Delegate Details
Contact: Company Name:
Company Address:
City: County: Post Code:
Phone: Fax: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Attendees:
Should you have more people interested in attending this workshop, please contact Carol or Alison on (020) 8335 4014 or e-mail: uk@idc-online.com
workshop Details
Manchester - 17 & 18 March 2015
Contact us for venue details
Please register by 24 February
to avoid disappointment
how did you hear about this
workshop?
BOOKInG cODe: SM
discount offer - save £995 - BUY Three, GET ONE FREE!
Register three people on a public two-day workshop and receive your fourth registration FREE
* discounted and free registration to be used for the same workshop in the same venue.
payment Details Note: Prices are EXCLUSIVE of VAT
Please Note: Full payment is required prior to the commencement of the workshop.
BOKING FOR ONE DELEGATE: £995 x ______ delegates = £______________
BOKING FOR four DELEGATES: £995 x ______ delegates = £______________
The fourth participant is FREE
early bird booking offer: (if booking on or before 17 February 2015)
YES, I qualify and would like to receive my 4 FREE eBooks
PLUS 25% OFF the registration price less 25% = £______________
+ VAT = £______________
total = £______________
I wish to pay by Cheque, made payable to IDC Technologies
Company Order Number: __________________________________
Please charge my Mastercard Visa Expiry Date: ____/_____
______________________________________________________________
Cardholder’s Name:
Cardholder’s Signature
On the reverse of your card, above the signature,
is a security number. In order to authorise your
card transaction, we require the last 3 digits:
If the Cardholder's address
is not the same as shown
above please tick this box:
1
3
WAeBbN S 7it8e 0: 03 263 189
www.idc-online.com
E-mail:
uk@idc-online.com
Mail:
IDC Technologies, Suite 18,
Fitzroy House, Lynwood Drive,
Worcester Park, Surrey, KT4 7AT
Fax:
(020) 8335 4120
register
now:
enquiries:
Phone:
(020) 8335 4014
Received a brochure in the mail
Received an email from IDC
Searched online (Google, Yahoo etc)
Recommended by a friend/colleague
Other (please specify) ________________________
______________________________________________
______________________________________________
______________________________________________
workshop details
• Workshops start at 8:30am and finish at 5:00pm daily.
• Registration is from 8:00am on the first day.
• The workshop fees are per delegate and include a reference
manual, handouts, lunches and all refreshments.
• Full payment is required prior to the commencement of the
workshop.
Early Bird BOOKING Offer
Please note that the Early Bird Booking Offer is only available
to those registrations received by 17 February 2015 and paid
prior to the commencement of the workshop.
Cancellation
A fee of 20% will apply for written cancellations received
7-14 days prior to the commencement of the workshop.
Cancellations received less than 7 days prior to the workshop
are not refundable however substitutes are welcome.
Confirmation
Confirmation will be sent upon receipt of registration. Full
details and workshop instructions will be sent to you prior to
the workshop date.
Please Note
Venues to be confirmed upon registration. Venues are subject
to change. Instructors may change without notice.
IDC Technologies has no affiliation with suppliers or
manufacturers and therefore presents a completely unbiased
factual view of the industry.
100% MONEY BACK GUARANTE
IDC Technologies’ engineers have put considerable time and
experience into ensuring that you derive the maximum value
from each workshop. If you feel by lunch time of the first day
that the workshop is not appropriate, please let us know so
that we can arrange a 100% refund of your fee.
Privacy Information
If your address details are incorrect, or you wish to remove
your name from our mailing list, please contact us by phone,
fax or e-mail.
At times we make use of lists that cannot be cross-checked
against our own database and you may receive a duplicate.
If so, please pass this on to an interested colleague.
Continuing Professional Development (CPD)
This program is designed to meet your continuing professional
development requirements. A certificate documenting your
attendance will be awarded at the end of the workshop. This
serves as important evidence of your continuing professional
commitment to your career.
www.idc-online.com