Metcraft Engineering manufactures and supplies hot dipped galvanized steel scaffolding systems, including cup lock, ring lock, and frame systems. The scaffolding is used in construction, industrial processes, and other industries. Metcraft also produces other hot dipped galvanized steel structures. It has fabrication and galvanizing facilities near Bangalore with modern machinery and a capacity of 1000 tons per month of fabrication and 1400 tons per month of galvanizing. Metcraft provides customized scaffolding solutions for various projects.
We are steel structure fabrication manufactory,
In our factory, we own two of 10 tons hoists work over a zinc kettle 13 meters long 3.5 meters deep and 2.8 meters wide. which boasts “North Zhejiang's largest operating kettle”• Guoxing products such as strucutural steel,wind tower,light poles, signal poles, high school and stadium bleachers, boat docks and boat trailers, bridge railing and retaining wall steel use Hot galvanizing anti-corrosion treatment.
For all construction purposes in RCC, TMT Rebar is the material that helps to strengthen the structure. Here are the important questions that often comes to our mind when we think selecting the Best Quality TMT Rebar.
We are steel structure fabrication manufactory,
In our factory, we own two of 10 tons hoists work over a zinc kettle 13 meters long 3.5 meters deep and 2.8 meters wide. which boasts “North Zhejiang's largest operating kettle”• Guoxing products such as strucutural steel,wind tower,light poles, signal poles, high school and stadium bleachers, boat docks and boat trailers, bridge railing and retaining wall steel use Hot galvanizing anti-corrosion treatment.
For all construction purposes in RCC, TMT Rebar is the material that helps to strengthen the structure. Here are the important questions that often comes to our mind when we think selecting the Best Quality TMT Rebar.
TMT Steel Bar (Saria/Rod) Manufacturing Industry. Production of TMT Rebars (Reinforced Bars), TMT Rods. TMT Steel
TMT bars or Thermo-Mechanically Treated bars are high-strength reinforcement bars having a tough outer core and a soft inner core. Thermo-Mechanically Treated bars or TMT bars are widely used for different construction projects. Made from high strength steel, TMT bars possess several qualities that make them the most preferred material for various construction projects.
With a unique metallurgical process that combines work hardening along with heat-treatment to create robust and high strength bars from low-carbon steel, TMT bars have a great demand.
See more
https://goo.gl/DEzMSW
https://goo.gl/CK36eB
https://goo.gl/z7pquN
Contact us:
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
#TMT_Bars_Manufacturing_Process, TMT Bar Manufacturing, TMT Bar Manufacturing Business in India, #What_is_the_Manufacturing_Process_of_TMT_Steel_bars? #TMT_Bars_Manufacturing_Plant, TMT Bars Manufacturing Process Pdf, TMT Bar Manufacturing Process PPT, TMT Bars Manufacturing Plant Cost, TMT Bar Manufacturing Process Flow Chart, TMT Bar Production in India, TMT Bars Manufacture, TMT Bars, #Thermo_Mechanically_Treated_(TMT)_Bars, TMT Steel Rods, Steel Bars, Steel TMT, TMT Saria Manufacture, TMT Steel Bar Manufacture, Thermo Mechanically Treated Bars, TMT Saria, Steel Bar Manufacture, #TMT_Saria_&_Steel_Bar_Manufacture, Production of TMT Rebars, TMT Rebar Production, Steel Bar Production, TMT Steel Bars Manufacturing Industry, TMT Bars Manufacture in India, #How_to_Start_TMT_Bar_Manufacturing_Business, Setting up TMT Bars Manufacturing Unit, Project Report for Setting Up TMT Bars Manufacturing Unit, Production Unit of TMT Bars, Manufacturing of TMT Bars, #Project_Report_on_TMT_Bars_Pdf, TMT Bars Manufacturing Plant Cost In India, TMT Bars (Sariya) Manufacturing Plant, Building Material, Project Report on TMT Bar Manufacturing Industry, Detailed Project Report on TMT Bar Production, #Project_Report_on_TMT_Bar_Production, Pre-Investment Feasibility Study on TMT Bars (Sariya) Manufacturing, Techno-Economic feasibility study on TMT Steel Bars Manufacturing Industry, Feasibility report on TMT Steel Bars Manufacturing Industry, #Free_Project_Profile_on_TMT_Bar_Production, Project profile on TMT Steel Bars Manufacturing Industry, Download free project profile on TMT Bars (Sariya) Manufacturing, TMT Steel Bars Manufacturing Process, TMT Bar Production, #TMT_Bar_Industry, TMT Bars Rolling Mill
TMT Bar manufacturing process is a critical application to understand. This presentation will help to understand the manufacturing process that stated in the graphical form.
TMT Steel Bar is the main component in RCC that determines the strength of the structure.
The TMT Rebar are highly ductile in nature for which it helps the structure to hold during natural calamities such as an earthquake, Flood as well.
To know more in detail you can visit
https://shyamsteel.com/blogs/difference-between-fe500-and-fe500d-tmt-rebar/
An insight into the Steel Plant at Durgapur, WB (INDIA) which is specialise to produce special steels (iron products not meant for construction purposes), from the eyes of a Vocational Trainee.
Engineering-Design-Manufacturing-Assembly of all kind of equipments and services from a single spare parts to complete LF or complete meltshop. Ladles, ladle cars, gas purging stations, emergency lance stirrers, wire feeders, material handling systems, Slab Turnover Device, etc. Training and advisory services. Complete turnkey projects for Mini Steel Plant and rolling mills.
Steel industries have been an integral addition to India’s economic scenario as they have not only added gross profit to the national fund but also have enhanced employment options significantly. There are many steels rolling mills manufacturers, steel plants suppliers and steel melting plants in India that makes up this particular industry. These steel rolling mill plants have become an important part of any steel industry. As steel is the most widely used metal in today’s world, it is an integral manufacturing material in number of industries.
Process optimization of pressure die casting to eliminate defect using cae so...eSAT Journals
Abstract
Die Casting is the manufacturing process by which a liquid material is pressurized in to the mould, which contains a hallow
cavity of the desired shape, and then molten metal is allowed to solidify. The solidified part is known as casting which is ejected
or broken out to complete the process. Objective in this project is to develop tools, dies and gating system. Identify defects such as
gas defects, shrinkage cavities, and mould material defects, pouring material defects, metallurgical defects etc. and take measures
to reduce flaws by using CAE software. To reduce the amount airs entrapped in the mould by changing the gating system, runner
and overflow location and optimize the gating system and process parameters for best quality product and improved productivity.
Defects can be formed easily at critical location during pressure die casting of aluminium alloy part. It has defective effect on the
casting. Mould filling and solidification process of a part was simulated using Z-cast software.
Key Words: Casting, HPDC, Z-cast, CAE Software, Simulation.
This lecture gives an overview about the possibilities to produce aluminium foilstock and wire-bar in a continuous way. Continuous casting is the preferred casting method in modern plants because it offers higher productivity. But there are limitations in the use of this technology because not all alloys can be cast. The product shows properties that can differ from conventional material. This lecture demonstrates the principal of operation; technologies for continuous casting; types of casters; areas of application; properties of the products; behaviour of the products in further processing. General knowledge in materials engineering, some knowledge about aluminium alloy constitution and heat treatment, engineering background in manufacturing processes and basic knowledge of foundry practice is assumed.
Friction-stir welding is an advanced solid-state joining process (the metal is not melted) which involves the use of a third body tool to join two facing surfaces. Heat is generated between the tool and material which leads to a very soft region near the FSW tool. It then mechanically intermixes the two pieces of metal at the place of the joint, then the softened metal (due to the elevated temperature) can be joined using mechanical pressure (which is applied by the tool), much like joining clay, or dough. It is primarily used on aluminium, and most often on extruded aluminium (non-heat treatable alloys), and on structures which need superior weld strength without a post weld heat treatment.
It was invented and experimentally proven at The Welding Institute UK in December 1991.
Waste Minimization and Cost Reduction in Process Industriesijsrd.com
The complete process of iron angles processing; machining and coating by Kalpataru Power Transmission Ltd. has been studied in detail. The different phases of production of the iron/steel angles include automation, CNC machines, Robo arms, overhead cranes and other mechanical equipments. After the straightening, shearing, punching, stamping, heating & bending operations are performed upon the different sections; each set of parts follow a sequence of processes. Once the sections are done with the machining processes, they follow the hot dip galvanization process. Surface Fluxing is the primary stage; followed by Steel Galvanizing and finally dichromate quenching. All the sections are arranged in their respective jigs. These structures or frames are handled by the overhead cranes and dipped in various tubs and lifted from them. Initially, the sections perform hot caustic degreasing followed by Hydrochloric acid pickling. Now these sections are rinsed in water and then soaked in a hot pre-flux. Before dipping into the Zinc tub, these sections are dried in the oven so that wet sections do not splash zinc off the tub. After taking out from the zinc tub, it is quenched in warm water. In the final step of this phase, all these sections are submerged into the dichromate solution to emboss a glossy texture. Here, in the whole coating process, it happens that the sections are to be immersed into various liquid tubs. So, when removing them out, many of the sections fail to be retrieved and remain inside the tub. So this decreases the production though negligible but with a feasible solution, it appears to be worth practicing. The objective of the project is to reduce the loss of iron angles and molten zinc during the coating of iron angles before dispatching.
TMT Steel Bar (Saria/Rod) Manufacturing Industry. Production of TMT Rebars (Reinforced Bars), TMT Rods. TMT Steel
TMT bars or Thermo-Mechanically Treated bars are high-strength reinforcement bars having a tough outer core and a soft inner core. Thermo-Mechanically Treated bars or TMT bars are widely used for different construction projects. Made from high strength steel, TMT bars possess several qualities that make them the most preferred material for various construction projects.
With a unique metallurgical process that combines work hardening along with heat-treatment to create robust and high strength bars from low-carbon steel, TMT bars have a great demand.
See more
https://goo.gl/DEzMSW
https://goo.gl/CK36eB
https://goo.gl/z7pquN
Contact us:
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
#TMT_Bars_Manufacturing_Process, TMT Bar Manufacturing, TMT Bar Manufacturing Business in India, #What_is_the_Manufacturing_Process_of_TMT_Steel_bars? #TMT_Bars_Manufacturing_Plant, TMT Bars Manufacturing Process Pdf, TMT Bar Manufacturing Process PPT, TMT Bars Manufacturing Plant Cost, TMT Bar Manufacturing Process Flow Chart, TMT Bar Production in India, TMT Bars Manufacture, TMT Bars, #Thermo_Mechanically_Treated_(TMT)_Bars, TMT Steel Rods, Steel Bars, Steel TMT, TMT Saria Manufacture, TMT Steel Bar Manufacture, Thermo Mechanically Treated Bars, TMT Saria, Steel Bar Manufacture, #TMT_Saria_&_Steel_Bar_Manufacture, Production of TMT Rebars, TMT Rebar Production, Steel Bar Production, TMT Steel Bars Manufacturing Industry, TMT Bars Manufacture in India, #How_to_Start_TMT_Bar_Manufacturing_Business, Setting up TMT Bars Manufacturing Unit, Project Report for Setting Up TMT Bars Manufacturing Unit, Production Unit of TMT Bars, Manufacturing of TMT Bars, #Project_Report_on_TMT_Bars_Pdf, TMT Bars Manufacturing Plant Cost In India, TMT Bars (Sariya) Manufacturing Plant, Building Material, Project Report on TMT Bar Manufacturing Industry, Detailed Project Report on TMT Bar Production, #Project_Report_on_TMT_Bar_Production, Pre-Investment Feasibility Study on TMT Bars (Sariya) Manufacturing, Techno-Economic feasibility study on TMT Steel Bars Manufacturing Industry, Feasibility report on TMT Steel Bars Manufacturing Industry, #Free_Project_Profile_on_TMT_Bar_Production, Project profile on TMT Steel Bars Manufacturing Industry, Download free project profile on TMT Bars (Sariya) Manufacturing, TMT Steel Bars Manufacturing Process, TMT Bar Production, #TMT_Bar_Industry, TMT Bars Rolling Mill
TMT Bar manufacturing process is a critical application to understand. This presentation will help to understand the manufacturing process that stated in the graphical form.
TMT Steel Bar is the main component in RCC that determines the strength of the structure.
The TMT Rebar are highly ductile in nature for which it helps the structure to hold during natural calamities such as an earthquake, Flood as well.
To know more in detail you can visit
https://shyamsteel.com/blogs/difference-between-fe500-and-fe500d-tmt-rebar/
An insight into the Steel Plant at Durgapur, WB (INDIA) which is specialise to produce special steels (iron products not meant for construction purposes), from the eyes of a Vocational Trainee.
Engineering-Design-Manufacturing-Assembly of all kind of equipments and services from a single spare parts to complete LF or complete meltshop. Ladles, ladle cars, gas purging stations, emergency lance stirrers, wire feeders, material handling systems, Slab Turnover Device, etc. Training and advisory services. Complete turnkey projects for Mini Steel Plant and rolling mills.
Steel industries have been an integral addition to India’s economic scenario as they have not only added gross profit to the national fund but also have enhanced employment options significantly. There are many steels rolling mills manufacturers, steel plants suppliers and steel melting plants in India that makes up this particular industry. These steel rolling mill plants have become an important part of any steel industry. As steel is the most widely used metal in today’s world, it is an integral manufacturing material in number of industries.
Process optimization of pressure die casting to eliminate defect using cae so...eSAT Journals
Abstract
Die Casting is the manufacturing process by which a liquid material is pressurized in to the mould, which contains a hallow
cavity of the desired shape, and then molten metal is allowed to solidify. The solidified part is known as casting which is ejected
or broken out to complete the process. Objective in this project is to develop tools, dies and gating system. Identify defects such as
gas defects, shrinkage cavities, and mould material defects, pouring material defects, metallurgical defects etc. and take measures
to reduce flaws by using CAE software. To reduce the amount airs entrapped in the mould by changing the gating system, runner
and overflow location and optimize the gating system and process parameters for best quality product and improved productivity.
Defects can be formed easily at critical location during pressure die casting of aluminium alloy part. It has defective effect on the
casting. Mould filling and solidification process of a part was simulated using Z-cast software.
Key Words: Casting, HPDC, Z-cast, CAE Software, Simulation.
This lecture gives an overview about the possibilities to produce aluminium foilstock and wire-bar in a continuous way. Continuous casting is the preferred casting method in modern plants because it offers higher productivity. But there are limitations in the use of this technology because not all alloys can be cast. The product shows properties that can differ from conventional material. This lecture demonstrates the principal of operation; technologies for continuous casting; types of casters; areas of application; properties of the products; behaviour of the products in further processing. General knowledge in materials engineering, some knowledge about aluminium alloy constitution and heat treatment, engineering background in manufacturing processes and basic knowledge of foundry practice is assumed.
Friction-stir welding is an advanced solid-state joining process (the metal is not melted) which involves the use of a third body tool to join two facing surfaces. Heat is generated between the tool and material which leads to a very soft region near the FSW tool. It then mechanically intermixes the two pieces of metal at the place of the joint, then the softened metal (due to the elevated temperature) can be joined using mechanical pressure (which is applied by the tool), much like joining clay, or dough. It is primarily used on aluminium, and most often on extruded aluminium (non-heat treatable alloys), and on structures which need superior weld strength without a post weld heat treatment.
It was invented and experimentally proven at The Welding Institute UK in December 1991.
Waste Minimization and Cost Reduction in Process Industriesijsrd.com
The complete process of iron angles processing; machining and coating by Kalpataru Power Transmission Ltd. has been studied in detail. The different phases of production of the iron/steel angles include automation, CNC machines, Robo arms, overhead cranes and other mechanical equipments. After the straightening, shearing, punching, stamping, heating & bending operations are performed upon the different sections; each set of parts follow a sequence of processes. Once the sections are done with the machining processes, they follow the hot dip galvanization process. Surface Fluxing is the primary stage; followed by Steel Galvanizing and finally dichromate quenching. All the sections are arranged in their respective jigs. These structures or frames are handled by the overhead cranes and dipped in various tubs and lifted from them. Initially, the sections perform hot caustic degreasing followed by Hydrochloric acid pickling. Now these sections are rinsed in water and then soaked in a hot pre-flux. Before dipping into the Zinc tub, these sections are dried in the oven so that wet sections do not splash zinc off the tub. After taking out from the zinc tub, it is quenched in warm water. In the final step of this phase, all these sections are submerged into the dichromate solution to emboss a glossy texture. Here, in the whole coating process, it happens that the sections are to be immersed into various liquid tubs. So, when removing them out, many of the sections fail to be retrieved and remain inside the tub. So this decreases the production though negligible but with a feasible solution, it appears to be worth practicing. The objective of the project is to reduce the loss of iron angles and molten zinc during the coating of iron angles before dispatching.
The PPT is prepared to create awareness in practicing civil engineers to minimize the mistakes in construction so as to enhance the stability and durability of structures
Steel fibers vs steel mesh in concrete reinforcementBekaert
Want to know all the benefits of steel fiber concrete reinforcement, as compared to traditional steel mesh concrete reinforcement? This presentation offers a full overview of its unique characteristics.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Interra presentation for mechanical activities Ayman bolty
the ppt describe briefley how INTERRA operates its activities in Egypt, and other sectors also how it define the sort of failure to activate the proper repair condition by variety of techniques & skilled labours
Ceramic and Hybrid bearings have been used widely throughout a host of nuclear, vacuum, cryogenic, high speed, insulating and non-magnetic applications. Please get in touch so that our team can help you select the right materials.
Visit: http://www.carterbearings.co.uk/unasis/hybrid-and-ceramic-bearings/
Colourmet Infratech Pvt. Ltd. is one of the India’;s fastest growing steel building solution company, situated in Pune. We design, manufacture, supply and erect Pre-Engineering Building Systems, complete roofing and wall cladding solutions. Colourmet Infratech Pvt. Ltd.is one of the few manufacturers in India to have a fully Integrated plant for Pre Engineered Building, Roof & Wall Panels, Z & C Purlin, Floor Deck Sheets etc. Colourmet has production capacity to produce total of 3000 tons/month of steel building. Adherence to the internationally accepted engineering practices in production, planning and control helps to keep up the delivery dates, products quality and efficient implementation. The experience, expertise and exposure that had been acquired over the years has enabled COLOURMET to diversify into providing turnkey contracting services to construction industries and offering single source responsibility involving complete pre-engineered building systems and solutions. COLOURMET is committed to provide the customer with the quality products and services. The COLOURMET excellence is reflected in the long list of satisfied customers.
Why Colourmet Infratech Pvt. Ltd.?
At COLOURMET, we ask this question at every stage of business execution and define all our actions to match, positively to the spirit of this question. This enables us to offer the best possible solution to our clients. The client-satisfaction helps COLOURMET to grow from the present level and enter the future with a head start.
Vision - Speed, Quality and Value
That, COLOURMET’;s a one-stop-shop solution for all roofing needs;
COLOURMET -strives always to establish and maintain the market leadership;
COLOURMET is committed to provide the best and the cost-effective solution to give customers value for their money;
That, COLOURMET is devoted to continuously update its material and process technologies to the international standards.
Superior Technology
Fastest Delivery
Site Service
Quality Materials
Fast Quotation
International Quality Standards
Proven Track Record.
2. Metcraft Engineering is one of the leading Manufacturers and
Suppliers of Hot Dipped Galvanized Steel Scaffolding systems in
various types
1.CupLock Scaffolding System
2.Ring Lock Scaffolding System
3.Frame Scaffolding System
Such Scaffolding Systems are used in various kinds of Industries
like Construction Industries, Process Industries, Power Industries,
Ship Building Sector,Houskeeping ,Slab Laying, Restoration
Sector,Interior Design Sector, Set Designing Industries, Air
Conditioners Ducting ,Overhead Electrical Cabling,ETC.
Also Metcraft Engineering is recognized in the industry as a leading
Manufacturer of Hot Dip Galvanized Structures, Pre-Engineered Building
Structures, Equipment Support Structures, Process Plant Structures,
Pipe Racks, Solar PV Panel Mounting Structures, Transmission Line
Towers Beam Crash barriers and Galvanized TMT Bar. We make only Hot
Dip Galvanized Steel products because of its superior characteristics.
Metcraft Engineering, is a part of Steel Centre group of companies
which engaged in Trading of steel for more than 27 years. We have state
of the art Steel Fabrication and Hot Dip Galvanizing Unit near Bangalore
at KIADB Industrial Area Spread across 90,000 sq.ft. of Plot Area and
35,000 sq.ft. of built up area,
Our manufacturing Unit is located at KIADB Industrial Area, Harohalli
which is 40Kms away from Bangalore on Kanakapura Road
spread across 90,000 sq.ft. of Plot Area.
Systems and Functionality of Organization :
We are ISO 9001:2008 Company and use Latest ERP systems on all
areas of our Organization to achieve our Quality Standards.
Human Resource :
Experience personnel in various departments have hands on experience in
various departments and Processes of manufacturing.
Capacity :
1000 Tons per Month of fabrication and 1400 Tons per Month of
galvanizing
Area :
25000 sq.ft. Finished Goods Storage: 20,000 sq.ft.
10,000 sq.ft. fabrication 25000 sq.ft.
Main Fabrication Machinery:
10 New Generation Hydraulic Presses of various capacities, 2 No’s radial
Drilling Machines, 8 No’s Welding Machines, Profile Cutting Machine,
Shearing and Press Brake machines, Variety of machine enables us to
take up any kind of Steel fabrication.
Hot Dip Galvanizing:
Latest Automatic Furnace oil Furnace with Bath size of 8 meters Length x
0.8 meters width and 1.2 meter Height.
Material Handling Equipments:
2 no’s Class III duty double Girder Crane for galvanizing and 1 single girder
for fabrication, Pick and carry crane of 12 Tons capacity, 100 Tons weigh
Bridge.
Testing Equipments:
Latest UTM (universal Testing Machine) for testing the Physical properties
of Steel and Well equipped Lab for testing various materials and
Galvanizing specifications
Introduction:
3. 1. Lowest Lifetime Cost-Long life make Hot Dip Galvanizing the most
versatile and economic way of protecting steel for long periods
(25+years).
The life of a zinc layer is between 40 and 100 years when in contact
with clean air at a humidity of approx 70%, zinc corrodes at low
speed in
comparison to Paint, henceforth maintaining the advantage in the
case of non-ventilated, aggressive and releasing gas atmospheres.
2. Reliability - The process is simple, straightforward and closely
controlled. The coating thicknesses are regular, predictable and
easily specified and are
defined by I.S. EN ISO 1461 : 2009.
3. Speed of Application - A fully galvanized protective coating can be
applied in a few hours. A proper four coat paint system requires
approximately one week.
4. Complete Coverage - Because it is dipped in molten zinc, all parts
of the surfaces are coated - inside and out - including awkward
corners and narrow gaps.
5. Coating Toughness - Hot Dip Galvanizing is unique the coating
bonds metallurgic ally with the steel giving a much greater resistance
to damage than other coatings.
6. Three Way Protection - Hot Dip Galvanizing protects in three ways.
It weathers at a slow rate giving a long and predictable life. The
coating sacrifices itself to any small areas exposed through drilling,
cutting or accidental damage. If large areas get damaged it prevents
the sideways creep of rust.
7. Ease of Inspection - Hot Dip Galvanizing is an honest coating - if it
looks continuous and sound, it is so. Coating thickness can be
checked easily with the use of magnetic probe (Elco Meter).
8. Faster Construction - Hot Dip Galvanized steel is ready for use. No
further site preparation, painting or inspection is necessary. Once
erected, cladding can begin immediately, thus accelerating the
construction program.
Advantages of Hot Dip Galvanizing:
4. Hot Dip Galvanized Cup Lock Type Scaffolding System
This type of lock system is quite versatile in its use and can be seen in construction,
demolition or maintenance projects. This type of cup-lock system allows quick
fastening of horizontals scaffolding. With the use of our impeccable Cup-lock
system, four horizontals can be easily fastened at one time with firm clamping action
of top cup thereby making the joint rigid. We have appointed some of the highly
skilled personnel who have engineered these cup-lock systems in such a manner
that it ensures quick erection and dismantling thus reducing on time and labor work
8. Hot Dip Galvanized-Customized Scaffolding parts and Steel
Ladders Side Brackets Davit Arm
Steel Plank is designed to span the bay
by hooking to the horizontal members
of the bay providing a safe work
platform, Made using Pre Galvanized
Formed Steel
STEEL PLANKS
9. Accessories-Screw Jack, base Plates, Coupler
ME - 601
ADJUSTABLE BASE JACK
(Pipe OD 38 mm) (Pipe OD 34 mm) (Solid ø 32 mm)
Code TL/AL (m) Wt. (kg) Code TL/AL (m) Wt. (kg) Code TL/AL (m) Wt. (kg)
6011
0.450/0.3
50 2.6 6021b
0.450/0.3
50 2.45 6031b
0.500/0.4
00 4.6
6012
0.550/0.4
50 2.95 6022b
0.550/0.4
50 2.75 6032b
0.600/0.5
00 5.35
6013
0.650/0.5
50 3.3 6023b
0.650/0.5
50 3.1 6033b
0.800/0.7
00 6.7
6014
0.750/0.6
50 5.7 6024b
0.750/0.6
50 3.4 6034b
1.00/0.80
0 8.12
All Varieties of Forged and Presses Couplers Base Plate-150mmx 150mm x6 mm
Thick, 100mm Height