Ceramic and Hybrid bearings have been used widely throughout a host of nuclear, vacuum, cryogenic, high speed, insulating and non-magnetic applications. Please get in touch so that our team can help you select the right materials.
Visit: http://www.carterbearings.co.uk/unasis/hybrid-and-ceramic-bearings/
The Technological advancements have driven up temperature and pressure serviced in the
petroleum, chemical, pulp, and environmental protection. Industries have increased the possibility of
severe corrosion and wear in process pressure vessels. The industries must upgrade the corrosion and
wear performance of these main important parts .Economic features as a rule will not allow fabricating
components from solid high alloyed materials. As a result it is essential to surface non-alloyed or low
alloy base materials with high-alloy cladding. The submerged arc welding(SAW) and electroslag welding
(ESW) process are appropriate for applying welded deposits over large surface areas by means of strip
electrodes .Both processes are using a granular flux material. A strip electrode, fed continuously, is
liquefied and fused to the substrate. In contrast with other processes it is very effective in spite of the
same equipments used but due to the wide strip used it procures a magnetic flow effect within to rectify it
a magnetic steering device is exercised. After the welding to examine the defects NDT's are carried upon it
Presentation by
Primary Information Services
www.primaryinfo.com
mailto:primaryinfo@gmail.com
Download PDF Version at
https://www.slideshare.net/thorapadi/presentations
See Youtube Channel
https://www.youtube.com/user/ch600091/videos?view_as=subscriber
ED Copper Foil for Lithium-ion Battery ManufacturingTargray
Targray ED copper foil is an anode material for secondary li-ion battery production. This anode current collector provides battery manufacturers with high adhesiveness and excellent tensile strength.
Bear the Wear: Optimizing ESP Efficiency and Run Life with Technical Ceramic ...CoorsTek, Inc.
Optimizing electrical submersible pumps (ESP) for efficiency and a longer run life can be done by using technical ceramic bearing systems for your operations. Most oil wells require artificial lift at some point to enhance production. As an oil well matures, it is not unusual for it to produce increasing amounts of water, abrasive solids, and gas. Shale oil wells produce these materials as well, sometimes starting immediately. ESP systems are ideal for lifting large volumes, but abrasive solids and gas pose major challenges for these types of pumps.
Abrasive solids in the pump or intake may introduce a three-body wear process. This type of wear is frequently referred to as abrasion and is defined as the removal of material by particles sliding, rolling, or crushing between two surfaces, as illustrated on slide 9. Or, by particles embedded in one surface sliding against a second surface (Wilson, 1990). This type of wear most frequently affects the pump’s radial bearings, impeller-diffuser seal areas, and thrust bearings (Beck et al., 2019).
When a pump’s radial bearings wear, the resulting increased clearance between the sliding bearing surfaces causes increasing shaft instability, or whipping, which can compromise the mechanical seal in the seal chamber section and allow wellbore fluids into the motor to cause an electrical failure. This shaft instability also stresses the motor bearings.
For bearing systems to have a long run-life and be reliable, the ESP industry has responded with design and material improvements. Manufacturers’ have implemented different bearing approaches with the biggest step-change coming from incorporating technical ceramics and cermets, a ceramic/metal composite material like tungsten carbide, into these systems.
This presentation discusses the benefits technical ceramics and cermets bring to electrical submersible pumps for oil pumps.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
MI cables are used for various industrial applications and to make thermocouples and RTDs.
Different types of MI Cables are MI thermocouple cables, MI RTD cables, MI Power cables, MI Heating cables, triaxial cables, coaxial cables and SPNDS.
basic structure of MI Cables comprises of conductors, insulating material and Metal sheath.
The Technological advancements have driven up temperature and pressure serviced in the
petroleum, chemical, pulp, and environmental protection. Industries have increased the possibility of
severe corrosion and wear in process pressure vessels. The industries must upgrade the corrosion and
wear performance of these main important parts .Economic features as a rule will not allow fabricating
components from solid high alloyed materials. As a result it is essential to surface non-alloyed or low
alloy base materials with high-alloy cladding. The submerged arc welding(SAW) and electroslag welding
(ESW) process are appropriate for applying welded deposits over large surface areas by means of strip
electrodes .Both processes are using a granular flux material. A strip electrode, fed continuously, is
liquefied and fused to the substrate. In contrast with other processes it is very effective in spite of the
same equipments used but due to the wide strip used it procures a magnetic flow effect within to rectify it
a magnetic steering device is exercised. After the welding to examine the defects NDT's are carried upon it
Presentation by
Primary Information Services
www.primaryinfo.com
mailto:primaryinfo@gmail.com
Download PDF Version at
https://www.slideshare.net/thorapadi/presentations
See Youtube Channel
https://www.youtube.com/user/ch600091/videos?view_as=subscriber
ED Copper Foil for Lithium-ion Battery ManufacturingTargray
Targray ED copper foil is an anode material for secondary li-ion battery production. This anode current collector provides battery manufacturers with high adhesiveness and excellent tensile strength.
Bear the Wear: Optimizing ESP Efficiency and Run Life with Technical Ceramic ...CoorsTek, Inc.
Optimizing electrical submersible pumps (ESP) for efficiency and a longer run life can be done by using technical ceramic bearing systems for your operations. Most oil wells require artificial lift at some point to enhance production. As an oil well matures, it is not unusual for it to produce increasing amounts of water, abrasive solids, and gas. Shale oil wells produce these materials as well, sometimes starting immediately. ESP systems are ideal for lifting large volumes, but abrasive solids and gas pose major challenges for these types of pumps.
Abrasive solids in the pump or intake may introduce a three-body wear process. This type of wear is frequently referred to as abrasion and is defined as the removal of material by particles sliding, rolling, or crushing between two surfaces, as illustrated on slide 9. Or, by particles embedded in one surface sliding against a second surface (Wilson, 1990). This type of wear most frequently affects the pump’s radial bearings, impeller-diffuser seal areas, and thrust bearings (Beck et al., 2019).
When a pump’s radial bearings wear, the resulting increased clearance between the sliding bearing surfaces causes increasing shaft instability, or whipping, which can compromise the mechanical seal in the seal chamber section and allow wellbore fluids into the motor to cause an electrical failure. This shaft instability also stresses the motor bearings.
For bearing systems to have a long run-life and be reliable, the ESP industry has responded with design and material improvements. Manufacturers’ have implemented different bearing approaches with the biggest step-change coming from incorporating technical ceramics and cermets, a ceramic/metal composite material like tungsten carbide, into these systems.
This presentation discusses the benefits technical ceramics and cermets bring to electrical submersible pumps for oil pumps.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
MI cables are used for various industrial applications and to make thermocouples and RTDs.
Different types of MI Cables are MI thermocouple cables, MI RTD cables, MI Power cables, MI Heating cables, triaxial cables, coaxial cables and SPNDS.
basic structure of MI Cables comprises of conductors, insulating material and Metal sheath.
Low Cost & High Performance “Refractories & Insulation Boards
manufacturing company many years of Expertise in manufacturing and supplying High Temperature Refractory Insulation Boards, Gaskets, Insulation Rollers, and Hitech Advanced Materials for Steel Industry, Aluminium Industry, Power Plant.
Steel Industry/Aluminium Industry/Cryogenic Application/Casting/Boiler/ Power Plant etc.
PAN INDIA / IMPORT/EXPORT
Manufacturer and supplier of Titanium pipe fittings, Inconel alloys and Incoloy alloys in United States. We are able to supply customized pipe&tube products made of high efficiency alloys with great features in quite a lot of countries.
Manufacturer and supplier of Titanium pipe fittings, Inconel alloys and Incoloy alloys in United States. We are able to supply customized pipe&tube products made of high efficiency alloys with great features in quite a lot of countries.
Most ceramics are made up of two or more elements. ... The two most common chemical bonds for ceramic materials are covalent and ionic. F.) cube root of five The bonding of atoms together is much stronger in covalent and ionic bonding than in metallic.
Zuudee BYD Titanium custom-made products brochure for subsea and offshore ind...ZhuDaniel1
Our product range includes titanium bars, sheets, plates, tubes, wires, and custom-designed components. We also offer a range of services, including CNC machining, welding, and fabrication, to provide you with a complete solution for your titanium product needs.
Similar to Special environment, hybrid and ceramic bearings (20)
The Unasis split bearings offer a revolutionary thin section bearing design. The split inner and outer ring design of the bearing allows the bearing preload to be determined by the shaft and the housing fits enabling the clearance or preload settings to be set in the design stage of the application.To know more visit: http://www.carterbearings.co.uk/unasis/split-thin-section-bearings/
Silverthin precision thin section bearings are manufactured in standard configurations, and are available as either sealed or unsealed units depending on requirements.To know more visit: http://www.carterbearings.co.uk/silverthin/thinsection-bearings/
Carter Manufacturing Inc specializes in prototyping and manufacturing high precision bearings for both standard and specialized applicationsin industries such as chemical, food processing and industrial.To know more visit: http://www.carterbearings.co.uk/carter/cam-followers/
Tri-roller or roll stake swaging tools have developed as an improvement to the traditional methods of Anvil or 2 wheel swaging. The Tri Roller or Roll Stake swaging tool offers the advantage of allowing the 3 rolling elements in the tool to better contact the V Groove surface of the bearing at the correct angle allowing the V Groove to fold over into the housing. To Know More Visit: http://www.carterbearings.co.uk/aerospace-bearing-tools/
Portable proof loading tools take the form of an electronic handheld display, receiver cups,load cell and DTi gauge. These are highly mobile units that enable, if required, proof loading of newly installed bearings without the need to full remove the component from its assembly. To Know More Visit: http://www.carterbearings.co.uk/aerospace-bearing-tools/
Install removal tools are design to insert and position bearing accurately prior to swaging and to carefully remove the bearing once the swaged lip has been removed. The install / removal tool keeps the bearing perpendicular to the housing ensuring that the housing is not damaged during the installation or removal. If bearings are just pressed into the housing the sharp edges of the bearing could score the housing bore. Care should always be taken when installing or removing bearings. To Know More Visit: http://www.carterbearings.co.uk/aerospace-bearing-tools/
Cylindrical roller bearings for radial, axial or combined loads, with cage or full complement; self-aligning bearings. To Know More Visit: http://www.carterbearings.co.uk/wp-content/themes/default/downloads/unitec/unitec_ci.pdf
UNITEC, leading company in the design and manufacturing of special precision cylindrical roller bearings for machine tools and general industry, delivers high quality service and support to customers world-wide. To Know More Visit: http://www.carterbearings.co.uk/wp-content/themes/default/downloads/unitec/unitec.pdf
Range of IBC Precision Products for Support of Ball Screws
Fields of application of 60° super precision angular contact ball bearings and units: Rigid but fairly low-friction assembly of ball screws or satellite screws for conversion of rotary movement into linear movement (among others, also in worm gears for rotating tables or in tailstocks). To Know More Visit:http://www.carterbearings.co.uk/wp-content/themes/default/downloads/ibc/IBC_Ball_Screw_Support_Bearings.pdf
UNASIS precision bearing cam followers and yoke rollers offer a great alternative to the mainstream brands, coupled with greater flexibility in terms of range, pecification and size which allows you to design with the freedom of knowing there is a bearing size to suit.
For more details visit: http://www.carterbearings.co.uk/unasis/
With an ever increasing number of applications demanding more from less, the Unasis split thin section range of bearings aims to bridge the gap providing a highly capable bearing in applications with restricted mass, cost and size. Applicable to all most all industries imaginable, the table below offers just a snapshot of the some industries where Unasis bearings can be successfully implemented. For More Information please Visit: http://www.carterbearings.co.uk/pdfs/Unasis_Thin_Section_Bearings.pdf
Carter’s Xtenda Series stainless steel needle bearings are available in both standard and custom sizes. You can order Cam Followers from stock in sizes 1/2 thru 2 1/2 and cam yoke rollers from 3/4 thru 2 1/2,with custom designs available for virtually any special application. For More Information please Visit: http://www.carterbearings.co.uk/wp-content/themes/default/downloads/carter/Carter_catalogue.pdf
IBC offers an exceptionally high quality range of precision and super precision bearings from
their production plants in Germany and Switzerland. For More Information please Visit:
http://www.carterbearings.co.uk/wp-content/themes/default/downloads/ibc/IBC%20Product%20Range.pdf
The Unasis range of high temperature bearings provide a high quality solution to applications which are normally beyond the range of standard bearing products.
Visit: http://www.carterbearings.co.uk/unasis/high-temperature-bearings/
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
4. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
High Vacuum Optical
Rotary Positioning Tables Guided Sights
Rotary Drives Focus Rings
Valves Security Camera Mounts
Sputter Coating Equipment Optical Drivers
Chemical Vapour Deposition Equipment Airborne Camera Mounts
Vacuum Evaporation Equipment Electron Microscopes
Turbo Molecular Pumps Manufacturing
Ferofluid Seals Bottling & Canning Equipment
Metal Film Deposition Equipment Food Processing
Nuclear Research Pharmaceutical Production Line Machinery
X-Ray Tubes Welding Equipment
Electron Beam Equipment Labelling Machines
Magnetic Seals Kiln Conveyors
Viewing Ports Tube Annealing Equipment
Fusion Research Equipment Steel Manufacturing
Synchrotron Applications Furnaces Bogies
Photoemission Electron Microscopy Research Corrugated Cardboard Manufacturing
Vacuum Furnaces Photographic Film Production Equipment
Electron Beam Welding Equipment Electric Motors
Electromagnetic Plasma Manipulation Drives Machine Tool Spindle
Semi-conductor Production Machines Switched Reluctance Motors
Space Satellites Renewable Energy
Hard Disk Manufacture Wind Power Generation
Clean Environment Tidal Power & Wave Energy
Pharmaceutical Equipment Solar Panel Rotary Actuation
Clean Room Hydro Electric Power Equipment
Blood Analytical Instruments Geothermal Equipment
Centrifugal Blood Separators Oil & Gas
Transfer Robots Downhole Pumps
Surgical Drills & Saws Valves
Liquid Crystal Panel Manufacture Gas Turbines
Etching Machines Orbital Welding Equipment
Cryogenic Pipe Inspection
Cryogenic Pumps Drilling & Casing Machinery
LOX Compatible Valves Remote Undersea Exploration
Dewar Rotary Neck Joints Blow Out Equipment
Cryogenic Valves Inline Flow Meters
Cryostats Motorsport
Non Magnetic Turbo Chargers
MRI Machines Car Wheel Bearings
Magnetic Couplings Fuel Injection Systems
Tesla Magnet Research Suspension
Waste Recycling Equipment Transmission Mounts
Ceramic materials have proved to be an invaluable resource when conventional bearings are unable to do the job. Whether it an issue with
lubrication, speed or incompatibility of material, there is a ceramic or hybrid bearing capable of providing a solution.
With their unique properties ceramics can be used in a variety of applications where conventional materials reach their limits. They have been
used widely in a host of nuclear, vacuum, cryogenic, high speed, insulating and non-magnetic applications.
5. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
Density 3.2 g/cm3
Linear expansion coefficient 3.1x10-6/oC
Hardness 1450Kg/mm2
Elastic modulus 310GPa
Poisson's Ratio 0.27
Electrical Resistance 1016 cm
Density 6.05 g/cm3
Linear expansion coefficient 10.3x10-6/oC
Hardness 1300Kg/mm2
Elastic modulus 220GPa
Poisson's Ratio 0.31
Electrical Resistance 1013 cm
Density 3.1g/cm3
Linear expansion coefficient 3.9x10-6/oC
Hardness 2200Kg/mm2
Elastic modulus 380GPa
Poisson's Ratio 0.16
Electrical Resistance 108 cm
Density 7.6g/cm3
Linear expansion coefficient 12.5x10-6/oC
Hardness 750Kg/mm2
Elastic modulus 200GPa
Poisson's Ratio 0.3
Electrical Resistance 10-5 cm
There are a variety of different ceramic materials, each with their own capabilities, advantages and disadvantages; their use in
bearing and rolling element applications was pioneered by many of the space agencies and continues to be at the forefront of
engineering technology.
The most common ceramic materials
and their properties are listed to the left along
with 440C stainless steel as a comparison to a
conventional material.
Components made of ceramic
materials have a number of special properties
such as being strong electrical insulators and
highly resistant to temperatures opening a
wider range of application than was thought
possible prior to their utilisation.
Aspects such as lower density gives a
weight saving and an increased life. This is
because centripetal force acting upon the
bearing is less, therefore reducing the wear on
the rolling elements.
6. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
Silicon Nitride (SI3N4) has better high temperature capabilities than most metals, combining retention of high strength and creep
resistance with oxidation resistance. In addition, its low thermal expansion coefficient gives good thermal shock resistance compared
with most ceramic materials.
Silicon Nitride is the material of choice for vacuum and high speed rolling
element applications. 58% lighter than traditional steel, Silicon Nitride
provides a weight saving benefit. Due to reduction in weight, there is a
reduction in centripetal force generated by the rolling elements. When used in
similar applications and compared to bearing steel, Silicon Nitride offers a
significantly increased fatigue life time.
Unlike other ceramic materials Silicon Nitride has the ability to carry similar
loads to that of bearing steel. Due to the hardness of the material any
application with shock loading is unsuitable for use of Silicon Nitride or any
other ceramic materials for bearing races.
Zirconia (ZrO2) was developed in the 1960s and '70s and was used to produce the external thermal barrier tiles on the space shuttle.
These tiles allowed the shuttle to re-enter the earth's atmosphere
without burning up. Zirconia is the material of choice for high
temperature applications. The thermal expansion and density of
Zirconia is closer to steel than that of any other ceramic material so it
does not have the same weight saving and thermal shock resistance
that are found in other ceramic materials.
Best used under low loads and moderate speeds, zirconia bearings are
used in high temperature and highly corrosive applications.
Less frequently used than other ceramic materials due to its raw material costs and difficulty to machine, silicon carbide offers
the best heat and corrosion resistance of all the ceramic materials.
Silicon Carbide is best used under low loads, low to moderate speeds and in highly corrosive environments.
7. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
good hot hardness and excellent rolling fatigue characteristics. It has been a natural choice for critical aircraft engine bearings used
in temperatures up to 500°C
These properties, combined with its superior fatigue resistance make it ideal for high temperature, high load bearing applications
where high precision and stability are paramount. Typical applications include gas turbines and semiconductor assemblies.
Beryllium Copper is a high strength alloy comparable to steel with non-magnetic properties that can be heat treated for use in
bearings.
The use of this material in bearings offers many advantages in extreme environments, excellent heat dissipation with a thermal
conductivity between that of steel and aluminium. The material structure makes it suitable for situations of occasional overload,
impact, high temperature, low temperature and marginal lubrication.
environments as well as certain corrosive applications.
CRONIDUR® 30 is a martensitic through hardened steel that has a similar corrosion resistance to 316L stainless steel. It offers a
significant improvement over 440C stainless steel which is typically used in standard stainless steel bearings.
Other properties that have defined it as the material of choice for high speed spindle bearings, includes high compressive strength,
extreme durability, high and low temperature stability.
CRONIDUR® 30 has been developed to provide solutions in applications such as down hole oil exploration equipment, cryogenic
pumps and super precision optical equipment. When combined with ceramic balls to form a hybrid bearing life will also be
significantly increased.
Stellite is a material that consists of complex carbides in an alloy matrix; it offers a combination of extremely resilient properties that
can be used for components of a rolling element bearing.
Advantages include resistance to wear, galling and corrosion (even at extremely high temperatures of 500°C) while retaining its
hardness of 45HRC and non magnetic properties.
Stellite has been extensively used in aerospace applications such as inline jet engine valves, landing gear and actuation
equipment. This has driven engineers to turn to this material when other exotic alloys and ceramics have not been suitable. Stellite
is extensively used in applications such as high temperatures valves, equipment operating within range of Tesla magnets,
semiconductor applications and cryogenic pumps.
8. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
Due to the diversity of environments where engineers & designers are now expecting bearings to operate many speciality materials
& metal and alloy combinations can be used to produce specific solutions.
Bearings can be offered from the following speciality materials: Inconel, Titanium, Monel, XD15NW, BG42 VIM-VAR, and M48
Powder Metal High Speed Steel.
Additional speciality ball options are: Ruby, Glass, PEEK, NYLON, Toloron, Titanium,
The above list is not exhaustive as new materials are constantly becoming available.
It is important when considering ceramic and hybrid bearings to define the correct material for use as a separator or cage. Whether
it is metal, plastic or a composite, each has its own advantages and disadvantages depending on whether the application requires
it to be non-magnetic, lightweight or vacuum compatible. Selection of the correct cage or separator material is important so please
contact us if you need assistance.
Available as either machined or moulded, Nylon/polyamide represents a low
cost, light weight cage option that is suitable for applications below 100°C.
Nylon/polyamide however, does not represent a good choice of cage in a
-
environment. The lightweight and insulating properties make them a suitable
choice for hybrid electrical or high speed bearing applications.
Polyether Ether Ketone, more commonly known as PEEK is a preferred material for use in clean and ultra-high vacuum
environments as it has low particle generation and will not out-gas in a vacuum. It is temperature resistant and stable to
approximately 200°C but is incompatible with acids and corrosive solutions. It can be used with both fully ceramic and hybrid
bearings.
9. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
Chemically resistant, insulating and non-magnetic PTFE is a widely used
polymer throughout a number of industries. Due to the strong covalent bonding
of the fluorine and carbon, PTFE has strong chemical resistance and is
completely hydrophobic. PTFE does not have a high load bearing capacity and
is not suitable for high temperature applications. PTFE can be used in both full
ceramic and hybrid bearings for cages or separators.
A metal ribbon cage is a standard choice for many applications with high temperature, vacuum or clean requirements. Metal cages
can take many forms such as: folded tab, riveted or machined. Steel or 440C Stainless Steel cage material is common in many
hybrid bearings as it matches the material used for the races and provides a low cost option that will survive many applications.
Exotic alloys can be used in special circumstances. The use of Beryllium Copper in non-magnetic applications is possible but these
would not be a low cost option. Needless to say carbon steels are not the ideal choice for non-magnetic or electrical applications
due to their conductive behaviours. Metal cages are prevalent in hybrid bearings and more unusual in ceramic bearings.
Full compliment (no cage) construction is a possibility for applications including ultra clean, vacuum, high temperature, non-
magnetic, corrosive and electrical applications. The principle function of a cage or separator is to ensure the balls do not have
contact with one another. Contact from the rolling elements increase friction and wear within the bearing. The opposing ball
rotational direction will cause high contact stress and consequent abrasion will cause residual wear to the elements and races. A
further result would be an increased torque and increased fatigue life.
Full compliment bearings are suitable for radial loading applications only. Axial capacity is considered ZERO.
Brass cages can be crowned, ball pocket and riveted styles; they offer a very durable, heavy duty solution particularly at elevated
running temperatures. A brass cage is not typically suitable for high speed applications and is more often found in larger bearing
assemblies.
Phenolic resin cages are light weight and strong making them ideal for high speed applications. They can be supplied as crowned,
ball pocket and two part riveted versions.
Phenolic cages are produced by impregnating textile with a thermo-setting resin. The resulting component when machined to
required sizes offers a very low coefficient of friction. The material is also able to absorb lubricants and maintain dimensional rigidity
while offering a high strength to weight ratio.
10. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
Bearing cages can also be produced from speciality materials specifically to suit applications. Ceramic, Vespel®, Meldin® Moly
Disulphide impregnated PEEK, Aluminium, Delrin® and Graphite are examples that can be considered.
There is also the option to replace a traditional cage with spacer slugs, tolroid or spacer balls. These options replace the cage with
a separator that floats between each of the balls.
These options are most suited to applications that have low torque and low speed for slow moving oscillating applications.
-
- -
-
-
-
-
Unasis XtrMD coating is a Molybdenum Disulphide based
coating that can be applied to a variety of components.
Molybdenum Disulphide (MoS2) is a naturally mined inorganic
material that has become extremely popular as a dry film
lubricant due to its availability, price and advantages over
comparable dry film lubricants. By reducing the coefficient of
friction, moly disulphide can increase the speed capacity and
increase the bearing life by acting as a sacrificial lubricant. In
ultra high vacuum applications where bearings are running at
high speed the XtrMD coating may create small particulate
that may contaminate the vacuum. Molybdenum Disulphide
coating can be applied to stainless steel hybrid bearings.
Heavier and more stable than Molybdenum Disulphide, Tungsten Disulphide has been extensively used throughout a number of
NASA, military and aerospace applications. With an even lower friction coefficient than Molybdenum Disulphide and the ability to
slow corrosion in some materials, Tungsten Disulphide has been the coating of choice for a number of high-end applications. It can
be used as a solution to problems such as excessive wear, seizing, galling and fretting. The coating itself is only 0.5 micron thick
and will not bond to itself, negating build up. Tungsten Disulphide is inert, non-toxic and nonmagnetic but unlike Molybdenum
Disulphide it will not cause particulate contamination of an ultra high vacuum. Tungsten Disulphide can be used to coat hybrid and
standard bearings.
11. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
Grease and Oils are lubricants applied to the majority of bearings in order to decrease wear on rolling elements but can be altered
in order to meet the demands of various applications.
All Unasis Hybrid Bearings can be greased to suit specific application requirements. High temperature, high load or high speed
applications would require specialist lubricants. Please contact us for assistance in specifying your lubrication. Grease and oil
lubricants can be added to full ceramic bearings as well as hybrid bearings in order to change performance characteristics such as
increase speed, reduce ball skidding or reducing noise.
XtrPoly is a polymer that is injected and cured to fill the volume between rolling elements and races in a bearing. The polymer is
filled with lubrication that is excreted under load. This provides constant and consistent lubrication in the bearing system. There is
no need for additional lubrication during the life of a XtrPoly filled bearing.
Because it is a solid, XtrPoly can help block debris and reduce ingress of foreign contamination into the bearing. Reducing the
incursion of debris into the bearing can significantly extend the bearing's life. The solid structure of XtrPoly also makes it suitable for
environments where grease and oil leakage cannot be tolerated, as it will not drip out of the bearing and contaminate the
environment.
XtrPoly filled bearings have speed limitations lower than standard oil or grease lubricated.
Filling bearings with XtrPoly does not change the dimensional tolerances of the bearing in any way, it simply fills the spaces
between the rolling elements and the cage. Any standard or non standard bearing can be filled.
12. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
XtrChrome is a nodular thin dense chrome coating applied to the bearing components in a process that ensures precise coating
deposition. The process offers many advantages including corrosion resistance, increased surface hardness, increased bearing
life, cost reduction, reduced production lead time and energy saving properties due to reduced surface friction.
XtrChrome is used across a variety of industries including aerospace,
naval, oil & gas, semiconductor, chemical, pharmaceutical and food
processing. It is particularly useful as a coating for bearings and bearing
surfaces made of 52100, M-50, M-50 NIL, BG-42. 440C, and all pH
basis metals. XtrChrome enables bearing surfaces to run longer and
cooler. US Air force tests have shown that XtrChrome enhances both
ball and roller bearings and does not affect or induce fatigue or change
base metal characteristics.
The surface texture gives exceptional performance in extreme
environments especially if used in conjunction with ceramic rolling
elements. The nodular microscopic surface holds lubrication within the
surface structure giving advantages in the following environments: fast acceleration without full ball loading, oscillating movements
which do not complete a full revolution, emergency rundown due to loss of lubrication, low rotational speeds and environments
which do not allow for lubrication. Speed capabilities at lower operating temperatures are significantly increased. Fretting corrosion
that is caused by micro displacement of the bearing rings can be greatly reduced.
XtrChrome Coating Benefits:
Corrosion resistance exceeding 440C stainless
steel, with additional chemical resistance
Increased wear resistance due to 78HRC surface
hardness
Reducing wear and friction in application
Absolute adhesion to basis metal: no chipping,
cracking, flaking or peeling
Reduced maintenance and part replacement costs
Longer running capabilities with lower coefficient of
friction
FDA approved for product contact
Nodular surface gives better adhesion strength of
lubrication film
Reduction of micro weld adhesion
XtrChrome coated components are more economic
and readily available the 440C Stainless Steel
13. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
UNASIS provide a wide range of ceramic ball options across a variety of sizes. Material options include Silicon Nitride (Si3N4),
Zirconia (ZRO2) and Silicon Carbide (SIC) from 0.4mm to just over 115mm in diameter with the most common sizes in between.
Precision grades provided are Grades 5, 10, 16, 25 and 100.
Ceramic balls have excellent resistance to wear and seizure. They offer solutions for high temperature environments (Up to 800°C
for Si3N4) high rigidity, light weight and are non magnetic with insulating properties.
Applications include high speed spindle bearings, solenoid valves, down hole pumps, vacuum equipment, gas monitoring devices
and turbo chargers.
14. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
Many of the modern bearing materials that are common place today have their origins from space technology. The same can be
said for many of the advanced ceramic materials used in bearings. Ceramic bearings can be found in a number of space
applications from space flight to satellites to unmanned exploration vehicles.
Space normally poses many problems for bearings due to the high stress and atmospheric environment. A number of benefits can
be found in the use ceramic bearings, light weight and vacuum compatible ceramic bearings provide a reduction in weight and are
able to withstand space flight. Additionally ceramic bearings, unlike their steel equivalents, are able to run unlubricated providing an
added weight saving without the need for heavy greases or oils that will also may contaminate delicate components in the
surrounding application.
Whether it is mixing chemicals or being used in medical equipment, ceramic bearings provide the best solutions to applications
where contamination can be life threatening. Standard steels, when washed with solutions can rust. Even stainless steels can
succumb to the effect of strong acids or alkali. The resulting corrosion can lead to particulate contamination. Standard bearings
also must have some form of lubrication, whether it is grease or oil, which can act as a breeding ground for bacteria and be
troublesome to clean.
Ceramic bearings however are inert, meaning they do not suffer the same problems of reacting with corrosive materials and will not
let off particulates or react with chemically harmful by-products. Furthermore, ceramic bearings can be run dry and free of
additional lubrication so will not harbour any microbiology and can be cleaned more easily with strong clean agents without worry.
Due to the extremely corrosive nature of the chemicals being mixed, Silicon
Nitride fully ceramic angular contact bearings are used inside the vessel with
drive being provided through a magnetic coupling keeping the motor
completely separate from the corrosive environment.
17. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
When speed is of paramount importance hybrid ceramic bearings hold the solution. Hybrid machine tool spindle bearings have
proved popular throughout industry. Due to the lower density of silicon nitride rolling elements in comparison to traditional steel
equivalent, Silicon Nitride rolling elements experience a reduction in centripetal force which acts upon them at high speeds. This
reduction in centripetal force means the rolling elements suffer less slipping and, in turn, a reduction in wear.
These properties result in two key benefits of hybrid ceramic bearings over traditional bearings, a 30%-50% increase in speed and
an increase in the fatigue life of the bearings. The direct benefit to the end user is that fewer breakages mean less machine down-
time, increasing output and fewer replacements.
Hybrid bearings have proved to be exceedingly popular in the electric motor applications. In particular the emerging wind energy
market has seen major benefit in the use of hybrid bearings. Issues arise in electric motor bearings when an electrical current is
passed through the bearing causing electrical pitting. The current will cause micro-welds to occur between the race and ball leading
to dramatically increased wear, noise and lubricant ageing. Once this has occurred the bearing has to be replaced.
Due to the insulating properties of ceramic materials, hybrid bearings do not allow the current to be passed between the races, thus
overcoming all the electrical pitting issues found with traditional steel bearings. This coupled with the additional benefits such as
longer life and higher speed capacity of hybrid bearings, means that electrical motors have been revolutionised.
Manufacturers of Turbo Chargers have always aspired to replace bushes
for ball bearings. This reduces turbo lag and increases performance
significantly. UNASIS has successfully assisted our customer by designing
a custom pair of hybrid ball bearings to enable them to achieve turbine
speeds in excess of 220 000 rpm whilst boosting pressures of up to 4 Bar.
The shaft temperature sees 300°C while the housing sits at around 200°C.
Contact your UNASIS representative to discuss your turbo charger
application.
18. UNASIS International Limited
www.unasisbearings.com
sales@unasisbearings.com Tel: +44 (0) 1235 527 770
At extreme temperatures, cryogenic applications demand the most of all their
components including bearings. At -196°C liquid nitrogen will freeze water in the
air blowing past. If a standard bearing were to be used all the clearance would be
pinched out of it rendering the bearing unable to rotate and it would lock up.
Due to the significantly lower thermal expansion coefficient of ceramic materials,
ceramic rolling elements will not contract as significantly as their steel
counterparts and as such will work under the coldest cryogenic temperatures. In
addition, ceramic bearings are able to withstand thermal shock of being flooded
with cryogenic fluid and the considerable instantaneous temperature drop results.
The high stresses this places on materials would cause 52100 steel bearings to fail.
Unasis cryogenic pump bearings have been used to great success in an inline submerged pump. The pump works in a vertical
orientation immersed in a cryogenic liquid such as liquid
Argon or Nitrogen at operating temperatures of between
155° to -196°C. An angular contact bearing pair was
designed with Stainless Steel Races, Silicon Nitride
Ceramic Balls and a custom PEEK Cage. The UNASIS
XTRTD dry film lubrication was also applied to meet with
the demand of extreme low temperature, extremely high
loading and speed conditions.
The very stringent requirements of high accuracy and light weight means that a
completely custom bearing had to be designed for an airborne actuation device.
The accuracy requirement meant that ABEC 7 precision race tolerances were
required while limited space meant that a special fully ceramic bearing with
separable inner race and stainless steel locking adaptor sleeve was designed to
interact with the mating components. The inner ring and outer ring are separable
to enable the bearing could be assembled with greater ease.