Grainsizeanalysis1 140815030613-phpapp01
•
0 likes•98 views
This document provides information on sieve analysis testing of soils based on IS 2720 Part 4. It discusses the objectives of classification of soils, coefficient of curvature, uniformity coefficient, and fineness modulus. It outlines applications in gradation of soils, mix design, and filter design. The theory section defines coefficients and formulas used. It describes the apparatus and sieves used and the procedure, precautions, observations, calculations, and results of the test. The goal is to characterize properties of a soil sample through separating particles by size.
Report
Share
Report
Share
Download to read offline
Recommended
Roadway condition survey
The document summarizes a study of the road conditions of the Panthapath-Russell Square region in Dhaka, Bangladesh. It describes the objectives, scope, and methodology of the study, which involved manual data collection through walking surveys. The analysis section describes issues found at intersections like traffic control problems, and conditions of the roadway like potholes and cracks. It notes problems like illegal parking reducing road widths and recommends improvements like removing potholes and enforcing traffic laws. The study had limitations like unskilled surveyors and relying only on manual data collection methods.
Circular Curves - Surveying - Civil Engineering
Surveying is the technique of determining the relative position of different features on, above or beneath the surface of the earth by means of direct or indirect measurements and finally representing them on a sheet of paper known as plan or map. Please refer this pdf to learn about Circular Curves.
Index properties of soil
Index properties of soil provide information about engineering properties like permeability and shear strength without requiring expensive testing. For coarse-grained soils, key index properties are particle size distribution and relative density, while for fine-grained soils they are consistency and Atterberg limits. Particle size distribution is determined through sieve analysis for coarser particles and sedimentation analysis for finer particles. It is presented as a grading curve showing the percentage of particles finer than each size. Well-graded soils have a wide range of particle sizes while poorly-graded soils are mostly one size.
Non Destructive test
This document summarizes several non-destructive testing methods for concrete, including:
- Rebound hammer testing, which measures surface hardness to estimate strength. Factors like surface smoothness and moisture affect results.
- Ultrasonic pulse velocity testing, which times pulse transmission through concrete to determine strength. Transducers can be placed on different faces.
- Penetration and pull-out tests, which measure hardness by probe penetration depth or pull-out force, respectively, and correlate to strength. Surface damage occurs.
- Acoustic, radioactive, and nuclear methods have also been used to study crack initiation and location defects, though radioactive techniques risk safety issues.
Design of super elevation :- A case study
The document discusses the design of super elevation for haul roads in opencast mines. It explains that super elevation is used to counter the centrifugal force experienced by vehicles turning at curves, preventing them from toppling over. The appropriate super elevation depends on the radius of curvature and vehicle speed, with smaller radii and higher speeds requiring greater super elevation. An equation is provided to calculate the exact super elevation based on these factors. Tables show example super elevations for different radii and speeds. Designers can use this information to determine the minimum radii that require super elevation at specific speeds. The document aims to help ensure haul road safety by providing guidance on super elevation design.
PERMANANT WAY
This document discusses various aspects of railway track design and maintenance. It covers topics like alignment surveys, track gauges, stresses in tracks, rail selection, wear testing, corrugation and creep of rails, rail joints, welding of rails, and types of rail sections. Permanent way requirements include uniform gauge, proper rail leveling, strength against lateral forces, well-designed curves and gradients, minimum tractive resistance, and facilities for drainage and repairs. Coning of wheels is described as well as different rail gauges used in India like broad, meter and narrow gauge. Rail functions and requirements for an ideal section are also outlined.
Electronic distance measurement (EDM)
Edm is a surveying instrument used to measure the distance electronically. This Surveying Instrument is used in triangulation to measure the length of Base line because more accuracy is required to measure the length of base line.
Grain size analysis
Soil Tests:
Grain size analysis:
Sieves Analysis
introduction:
Apparatus:
Procedure:
Calculations
Recommended
Roadway condition survey
The document summarizes a study of the road conditions of the Panthapath-Russell Square region in Dhaka, Bangladesh. It describes the objectives, scope, and methodology of the study, which involved manual data collection through walking surveys. The analysis section describes issues found at intersections like traffic control problems, and conditions of the roadway like potholes and cracks. It notes problems like illegal parking reducing road widths and recommends improvements like removing potholes and enforcing traffic laws. The study had limitations like unskilled surveyors and relying only on manual data collection methods.
Circular Curves - Surveying - Civil Engineering
Surveying is the technique of determining the relative position of different features on, above or beneath the surface of the earth by means of direct or indirect measurements and finally representing them on a sheet of paper known as plan or map. Please refer this pdf to learn about Circular Curves.
Index properties of soil
Index properties of soil provide information about engineering properties like permeability and shear strength without requiring expensive testing. For coarse-grained soils, key index properties are particle size distribution and relative density, while for fine-grained soils they are consistency and Atterberg limits. Particle size distribution is determined through sieve analysis for coarser particles and sedimentation analysis for finer particles. It is presented as a grading curve showing the percentage of particles finer than each size. Well-graded soils have a wide range of particle sizes while poorly-graded soils are mostly one size.
Non Destructive test
This document summarizes several non-destructive testing methods for concrete, including:
- Rebound hammer testing, which measures surface hardness to estimate strength. Factors like surface smoothness and moisture affect results.
- Ultrasonic pulse velocity testing, which times pulse transmission through concrete to determine strength. Transducers can be placed on different faces.
- Penetration and pull-out tests, which measure hardness by probe penetration depth or pull-out force, respectively, and correlate to strength. Surface damage occurs.
- Acoustic, radioactive, and nuclear methods have also been used to study crack initiation and location defects, though radioactive techniques risk safety issues.
Design of super elevation :- A case study
The document discusses the design of super elevation for haul roads in opencast mines. It explains that super elevation is used to counter the centrifugal force experienced by vehicles turning at curves, preventing them from toppling over. The appropriate super elevation depends on the radius of curvature and vehicle speed, with smaller radii and higher speeds requiring greater super elevation. An equation is provided to calculate the exact super elevation based on these factors. Tables show example super elevations for different radii and speeds. Designers can use this information to determine the minimum radii that require super elevation at specific speeds. The document aims to help ensure haul road safety by providing guidance on super elevation design.
PERMANANT WAY
This document discusses various aspects of railway track design and maintenance. It covers topics like alignment surveys, track gauges, stresses in tracks, rail selection, wear testing, corrugation and creep of rails, rail joints, welding of rails, and types of rail sections. Permanent way requirements include uniform gauge, proper rail leveling, strength against lateral forces, well-designed curves and gradients, minimum tractive resistance, and facilities for drainage and repairs. Coning of wheels is described as well as different rail gauges used in India like broad, meter and narrow gauge. Rail functions and requirements for an ideal section are also outlined.
Electronic distance measurement (EDM)
Edm is a surveying instrument used to measure the distance electronically. This Surveying Instrument is used in triangulation to measure the length of Base line because more accuracy is required to measure the length of base line.
Grain size analysis
Soil Tests:
Grain size analysis:
Sieves Analysis
introduction:
Apparatus:
Procedure:
Calculations
Grain size analysis
Soil Tests:
Grain size analysis:
Sieve Analysis
Introduction;
Apparatus:
Procedure:
Calculations:
Sieve analysis.pdf all
This document presents information on sieve analysis, which is used to determine the grain size distribution of soils. Sieve analysis involves shaking a stack of sieves with different sized meshes to separate soil particles. Coarser particles are analyzed using larger sieves while finer particles use smaller sieves. The procedure involves weighing each sieve and pan before and after to determine the mass of soil retained. From this, the percentage of soil passing and retained on each sieve can be calculated. The distribution of grain sizes affects important engineering properties of soils like classification.
Site Investigation and Example of Soil Sampling
The document provides information on various soil testing methods conducted as part of a site investigation study. It discusses procedures for collecting undisturbed and disturbed soil samples, and conducting tests such as grain size analysis, Atterberg limits tests, relative density tests, and compaction tests. The purpose of the site investigation and specific laboratory tests are explained. Sample collection and testing is performed to obtain properties of the soil and understand its suitability for construction purposes.
Sieve & Hydrometer Analysis
This document provides information about sieve analysis and hydrometer analysis for determining the grain size distribution of soils. Sieve analysis is used to analyze the distribution of gravel and sand size particles, while hydrometer analysis is used for silt and clay size particles too small to be analyzed by sieves. The document describes the basic procedures and equipment used for each type of analysis, including stacking sieves of decreasing size and agitating soil-water suspensions to measure particle sedimentation rates. Combined sieve and hydrometer analysis can determine the full grain size distribution of soils containing particles of various sizes.
SOIL ANALYSIS CLASSIFICATION AND CATEGORIES
If you’re stressed because of a lack of success
The way to fix it (and become successful) is to harness that stress
It’s a god given signal that your actions and habits don’t line up with that success
If you’re truly dialed in, stress leaves and you love the process regardless of success
Sieve analysis of fine aggregates student experiment
The document summarizes the results of a sieve analysis test performed on fine aggregates to determine particle size distribution. The test involved sieving 1000g of fine aggregate samples through a series of sieves and weighing the material retained on each sieve. This allowed calculating the percentage of material passing through each sieve. The distribution was found to be uneven, indicating the aggregates were not suitable for concrete mixing. The sieve analysis procedure and results are important for construction quality control and acceptance.
Sample soil and analyze results pptx
This document provides information on soil sampling and analysis. It discusses three learning outcomes: preparing for soil sampling, determining soil characteristics through sampling, and interpreting soil analysis results. Key points covered include selecting sampling tools, identifying homogeneous soil types, sampling methods, determining physical properties like texture, structure, color, and calculating values like bulk density and porosity. The document aims to guide students in properly conducting soil sampling and analysis.
Soil Enginnering.pptx
This document provides instructions and results for several experiments analyzing soil properties:
1. Grain size distribution was analyzed using sieve analysis, finding the soil to be well graded with a uniformity coefficient of 11.52 and curvature coefficient of 1.12.
2. Oven drying and core cutter methods determined the moisture content, bulk unit weight, and dry unit weight of soil samples. Average moisture content was 23.05%, bulk density was 1.774 g/cm3, and dry density was 1.593 g/cm3.
3. Additional experiments analyzed liquid limit, plastic limit, and replaced sand to determine in-field densities, finding bulk density of 1.415 g/cm3 and
Mekanika Tanah - Sieve Analysis
The document discusses procedures for determining soil particle size distribution through sieve and hydrometer tests. It provides definitions of soil, outlines sieve and hydrometer test procedures, and discusses relevant concepts like soil texture classes and particle shape. Sample calculations are shown for a sieve test involving determining particle sizes retained on various sieves, calculating percentages, and deriving distribution and uniformity coefficients. Practice problems are also provided to calculate coefficients based on given particle size data.
Index Properties of Soil Part II
The document discusses various index properties of soils including specific gravity, particle size distribution, and methods for determining these properties. Specific gravity can be determined through density bottle, flask, or pycnometer methods. Particle size distribution is analyzed through sieve analysis for coarse-grained soils and sedimentation analysis for fine-grained soils. Sedimentation analysis involves allowing soil particles in suspension to settle out of water over time based on particle size.
Soil investigation jda_13_194
This soil investigation report summarizes subsurface exploration and laboratory testing conducted for a proposed wind turbine foundation project. One borehole was drilled to a depth of 10 meters and standard penetration and sampling tests were performed. Undisturbed and disturbed soil samples were collected and subjected to various laboratory tests to determine physical and engineering properties. These included dry density, particle size analysis, Atterberg limits, shear strength, consolidation, and free swell tests. The results were analyzed to evaluate the subsurface conditions and provide a safe bearing capacity for foundation design of the wind turbine.
Understanding sieve analysis of sand
This document provides instructions for performing a sieve analysis test to determine the particle size distribution of fine aggregates or sand. The key steps include: 1) preparing a representative sample, 2) arranging sieves in order of decreasing size, 3) sieving the sample and weighing the material retained on each sieve, 4) calculating the percentage retained, cumulative percentage retained, and cumulative percentage passing through each sieve. The results are used to evaluate whether the sand is well graded or poorly graded and to calculate metrics like the uniformity coefficient.
Sieve Analysis
This document discusses grain size analysis of soils, which determines the size distribution of particles in a soil sample. It describes two common methods: sieve analysis for particles larger than 0.075 mm and hydrometer analysis for smaller particles. Sieve analysis involves shaking a soil sample through a nested set of sieves to separate particles by size. A particle size distribution curve shows the percentage of particles finer than each size cutoff. Soil properties like effective size, uniformity, and gradation can be determined from this curve. Sieve analysis data is collected and a particle size distribution curve can be generated to classify the soil and assess its engineering properties.
soil classification lab
This document provides information on procedures for determining soil classification parameters through laboratory tests. It describes the liquid limit test, plastic limit test, and sieve analysis test. The liquid limit test determines the water content at which a soil behaves as a liquid. The plastic limit test finds the water content where a soil rod crumbles. Sieve analysis involves separating soil into grain sizes to determine classifications. The results of these tests are used to classify soils based on standards like the Unified Soil Classification System.
Sieve analysis class task presentation By Engr. Syed Abdullah
This document presents the results of a sieve analysis test performed on soil samples from 4 locations at Comsat University. The test aimed to determine the grain size distribution of the samples. The procedure involved collecting, drying, and sieving the soil through a series of sieves. The mass of soil retained on each sieve was measured and used to construct a gradation curve. Based on the results, the soil was classified as a well-graded sandy loam, which has appropriate properties for gardening.
Soil Classification & Systems
This presentation covers the topic of particle size classification, dry sieve analysis, wet sieve analysis, sedimentation analysis, stokes law, methods of sedimentation analysis, Indian Standard Soil classification system.
SUMMER TRAINING REPORTS OF SOIL TESTING
This document is a summer training report submitted by Mohd Raish Ansari to fulfill the requirements for a Bachelor of Technology degree in Civil Engineering from Babu Banarasidas University. It details a 4-week training conducted at the Geotechnical Engineering Directorate of RDSO, where the student learned various soil testing procedures as outlined in the Indian Standards for soil classification and compaction testing. The report includes an introduction, acknowledgements, procedures for common tests like moisture content, dry density, particle size distribution, liquid limit, plastic limit, and compaction. It emphasizes the importance of standardized testing for quality control on railway projects.
Aashto t 87 80
This document provides procedures for preparing soil and soil aggregate samples for various tests, including:
- Drying the sample and breaking up aggregations without reducing grain size
- Separating the sample using sieves into fractions for particle size analysis, physical tests, and moisture-density relations tests
- Obtaining representative portions of each fraction for testing through proportional splitting or quartering
- Specific requirements for sample sizes and preparation for particle size analysis, physical tests, specific gravity tests, and moisture-density relations tests
Grain size analysis of soil by sieve and hydrometer
This document describes procedures for performing a grain size analysis of soil using sieve and hydrometer methods. The sieve analysis is used to determine the distribution of coarser particles, while the hydrometer method analyzes finer particles. The sample soil was found to have a uniformity coefficient of 2.5 and curvature coefficient of 1.62, classifying it as a poorly graded gravel soil. The analysis involves separating the soil into fractions using sieves, measuring particle sizes below 0.075mm using a hydrometer, and calculating coefficients to characterize the soil gradation and type.
一比一原版美国南加州大学毕业证（usc学位证）如何办理
原件一模一样【微信：WP101A】【美国南加州大学毕业证（usc学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国南加州大学毕业证（usc学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国南加州大学毕业证（usc学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国南加州大学毕业证（usc学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国南加州大学毕业证（usc学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Exploring low emissions development opportunities in food systems
Presented by Christopher Martius (CIFOR-ICRAF) at "Side event 60th sessions of the UNFCCC Subsidiary Bodies - Sustainable Bites: Innovating Low Emission Food Systems One Country at a Time" on 13 June 2024
More Related Content
Similar to Grainsizeanalysis1 140815030613-phpapp01
Grain size analysis
Soil Tests:
Grain size analysis:
Sieve Analysis
Introduction;
Apparatus:
Procedure:
Calculations:
Sieve analysis.pdf all
This document presents information on sieve analysis, which is used to determine the grain size distribution of soils. Sieve analysis involves shaking a stack of sieves with different sized meshes to separate soil particles. Coarser particles are analyzed using larger sieves while finer particles use smaller sieves. The procedure involves weighing each sieve and pan before and after to determine the mass of soil retained. From this, the percentage of soil passing and retained on each sieve can be calculated. The distribution of grain sizes affects important engineering properties of soils like classification.
Site Investigation and Example of Soil Sampling
The document provides information on various soil testing methods conducted as part of a site investigation study. It discusses procedures for collecting undisturbed and disturbed soil samples, and conducting tests such as grain size analysis, Atterberg limits tests, relative density tests, and compaction tests. The purpose of the site investigation and specific laboratory tests are explained. Sample collection and testing is performed to obtain properties of the soil and understand its suitability for construction purposes.
Sieve & Hydrometer Analysis
This document provides information about sieve analysis and hydrometer analysis for determining the grain size distribution of soils. Sieve analysis is used to analyze the distribution of gravel and sand size particles, while hydrometer analysis is used for silt and clay size particles too small to be analyzed by sieves. The document describes the basic procedures and equipment used for each type of analysis, including stacking sieves of decreasing size and agitating soil-water suspensions to measure particle sedimentation rates. Combined sieve and hydrometer analysis can determine the full grain size distribution of soils containing particles of various sizes.
SOIL ANALYSIS CLASSIFICATION AND CATEGORIES
If you’re stressed because of a lack of success
The way to fix it (and become successful) is to harness that stress
It’s a god given signal that your actions and habits don’t line up with that success
If you’re truly dialed in, stress leaves and you love the process regardless of success
Sieve analysis of fine aggregates student experiment
The document summarizes the results of a sieve analysis test performed on fine aggregates to determine particle size distribution. The test involved sieving 1000g of fine aggregate samples through a series of sieves and weighing the material retained on each sieve. This allowed calculating the percentage of material passing through each sieve. The distribution was found to be uneven, indicating the aggregates were not suitable for concrete mixing. The sieve analysis procedure and results are important for construction quality control and acceptance.
Sample soil and analyze results pptx
This document provides information on soil sampling and analysis. It discusses three learning outcomes: preparing for soil sampling, determining soil characteristics through sampling, and interpreting soil analysis results. Key points covered include selecting sampling tools, identifying homogeneous soil types, sampling methods, determining physical properties like texture, structure, color, and calculating values like bulk density and porosity. The document aims to guide students in properly conducting soil sampling and analysis.
Soil Enginnering.pptx
This document provides instructions and results for several experiments analyzing soil properties:
1. Grain size distribution was analyzed using sieve analysis, finding the soil to be well graded with a uniformity coefficient of 11.52 and curvature coefficient of 1.12.
2. Oven drying and core cutter methods determined the moisture content, bulk unit weight, and dry unit weight of soil samples. Average moisture content was 23.05%, bulk density was 1.774 g/cm3, and dry density was 1.593 g/cm3.
3. Additional experiments analyzed liquid limit, plastic limit, and replaced sand to determine in-field densities, finding bulk density of 1.415 g/cm3 and
Mekanika Tanah - Sieve Analysis
The document discusses procedures for determining soil particle size distribution through sieve and hydrometer tests. It provides definitions of soil, outlines sieve and hydrometer test procedures, and discusses relevant concepts like soil texture classes and particle shape. Sample calculations are shown for a sieve test involving determining particle sizes retained on various sieves, calculating percentages, and deriving distribution and uniformity coefficients. Practice problems are also provided to calculate coefficients based on given particle size data.
Index Properties of Soil Part II
The document discusses various index properties of soils including specific gravity, particle size distribution, and methods for determining these properties. Specific gravity can be determined through density bottle, flask, or pycnometer methods. Particle size distribution is analyzed through sieve analysis for coarse-grained soils and sedimentation analysis for fine-grained soils. Sedimentation analysis involves allowing soil particles in suspension to settle out of water over time based on particle size.
Soil investigation jda_13_194
This soil investigation report summarizes subsurface exploration and laboratory testing conducted for a proposed wind turbine foundation project. One borehole was drilled to a depth of 10 meters and standard penetration and sampling tests were performed. Undisturbed and disturbed soil samples were collected and subjected to various laboratory tests to determine physical and engineering properties. These included dry density, particle size analysis, Atterberg limits, shear strength, consolidation, and free swell tests. The results were analyzed to evaluate the subsurface conditions and provide a safe bearing capacity for foundation design of the wind turbine.
Understanding sieve analysis of sand
This document provides instructions for performing a sieve analysis test to determine the particle size distribution of fine aggregates or sand. The key steps include: 1) preparing a representative sample, 2) arranging sieves in order of decreasing size, 3) sieving the sample and weighing the material retained on each sieve, 4) calculating the percentage retained, cumulative percentage retained, and cumulative percentage passing through each sieve. The results are used to evaluate whether the sand is well graded or poorly graded and to calculate metrics like the uniformity coefficient.
Sieve Analysis
This document discusses grain size analysis of soils, which determines the size distribution of particles in a soil sample. It describes two common methods: sieve analysis for particles larger than 0.075 mm and hydrometer analysis for smaller particles. Sieve analysis involves shaking a soil sample through a nested set of sieves to separate particles by size. A particle size distribution curve shows the percentage of particles finer than each size cutoff. Soil properties like effective size, uniformity, and gradation can be determined from this curve. Sieve analysis data is collected and a particle size distribution curve can be generated to classify the soil and assess its engineering properties.
soil classification lab
This document provides information on procedures for determining soil classification parameters through laboratory tests. It describes the liquid limit test, plastic limit test, and sieve analysis test. The liquid limit test determines the water content at which a soil behaves as a liquid. The plastic limit test finds the water content where a soil rod crumbles. Sieve analysis involves separating soil into grain sizes to determine classifications. The results of these tests are used to classify soils based on standards like the Unified Soil Classification System.
Sieve analysis class task presentation By Engr. Syed Abdullah
This document presents the results of a sieve analysis test performed on soil samples from 4 locations at Comsat University. The test aimed to determine the grain size distribution of the samples. The procedure involved collecting, drying, and sieving the soil through a series of sieves. The mass of soil retained on each sieve was measured and used to construct a gradation curve. Based on the results, the soil was classified as a well-graded sandy loam, which has appropriate properties for gardening.
Soil Classification & Systems
This presentation covers the topic of particle size classification, dry sieve analysis, wet sieve analysis, sedimentation analysis, stokes law, methods of sedimentation analysis, Indian Standard Soil classification system.
SUMMER TRAINING REPORTS OF SOIL TESTING
This document is a summer training report submitted by Mohd Raish Ansari to fulfill the requirements for a Bachelor of Technology degree in Civil Engineering from Babu Banarasidas University. It details a 4-week training conducted at the Geotechnical Engineering Directorate of RDSO, where the student learned various soil testing procedures as outlined in the Indian Standards for soil classification and compaction testing. The report includes an introduction, acknowledgements, procedures for common tests like moisture content, dry density, particle size distribution, liquid limit, plastic limit, and compaction. It emphasizes the importance of standardized testing for quality control on railway projects.
Aashto t 87 80
This document provides procedures for preparing soil and soil aggregate samples for various tests, including:
- Drying the sample and breaking up aggregations without reducing grain size
- Separating the sample using sieves into fractions for particle size analysis, physical tests, and moisture-density relations tests
- Obtaining representative portions of each fraction for testing through proportional splitting or quartering
- Specific requirements for sample sizes and preparation for particle size analysis, physical tests, specific gravity tests, and moisture-density relations tests
Grain size analysis of soil by sieve and hydrometer
This document describes procedures for performing a grain size analysis of soil using sieve and hydrometer methods. The sieve analysis is used to determine the distribution of coarser particles, while the hydrometer method analyzes finer particles. The sample soil was found to have a uniformity coefficient of 2.5 and curvature coefficient of 1.62, classifying it as a poorly graded gravel soil. The analysis involves separating the soil into fractions using sieves, measuring particle sizes below 0.075mm using a hydrometer, and calculating coefficients to characterize the soil gradation and type.
Similar to Grainsizeanalysis1 140815030613-phpapp01 (20)
Sieve analysis of fine aggregates student experiment
Sieve analysis of fine aggregates student experiment
Sieve analysis class task presentation By Engr. Syed Abdullah
Sieve analysis class task presentation By Engr. Syed Abdullah
Grain size analysis of soil by sieve and hydrometer
Grain size analysis of soil by sieve and hydrometer
Recently uploaded
一比一原版美国南加州大学毕业证（usc学位证）如何办理
原件一模一样【微信：WP101A】【美国南加州大学毕业证（usc学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国南加州大学毕业证（usc学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国南加州大学毕业证（usc学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国南加州大学毕业证（usc学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国南加州大学毕业证（usc学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Exploring low emissions development opportunities in food systems
Presented by Christopher Martius (CIFOR-ICRAF) at "Side event 60th sessions of the UNFCCC Subsidiary Bodies - Sustainable Bites: Innovating Low Emission Food Systems One Country at a Time" on 13 June 2024
原版制作(UPSaclay毕业证书)巴黎萨克雷大学毕业证PDF成绩单一模一样
原件一模一样【微信：bwp0011】《(UPSaclay毕业证书)巴黎萨克雷大学毕业证PDF成绩单》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Monitor indicators of genetic diversity from space using Earth Observation data
Genetic diversity within and among populations is essential for species persistence. While targets and indicators for genetic diversity are captured in the Kunming-Montreal Global Biodiversity Framework, assessing genetic diversity across many species at national and regional scales remains challenging. Parties to the Convention on Biological Diversity (CBD) need accessible tools for reliable and efficient monitoring at relevant scales. Here, we describe how Earth Observation satellites (EO) make essential contributions to enable, accelerate, and improve genetic diversity monitoring and preservation. Specifically, we introduce a workflow integrating EO into existing genetic diversity monitoring strategies and present a set of examples where EO data is or can be integrated to improve assessment, monitoring, and conservation. We describe how available EO data can be integrated in innovative ways to support calculation of the genetic diversity indicators of the GBF monitoring framework and to inform management and monitoring decisions, especially in areas with limited research infrastructure or access. We also describe novel, integrative approaches to improve the indicators that can be implemented with the coming generation of EO data, and new capabilities that will provide unprecedented detail to characterize the changes to Earth’s surface and their implications for biodiversity, on a global scale.
Mass Production of Trichogramma sp..pptx
Trichogramma spp. is an efficient egg parasitoids that potentially assist to manage the insect-pests from the field condition by parasiting the host eggs. To mass culture this egg parasitoids effectively, we need to culture another stored grain pest- Rice Meal Moth (Corcyra Cephalonica). After rearing this pest, the eggs of Corcyra will carry the potential Trichogramma spp., which is an Hymenopteran Wasp. The detailed Methodologies of rearing both Corcyra Cephalonica and Trichogramma spp. have described on this ppt.
学校原版(unuk学位证书)英国牛津布鲁克斯大学毕业证硕士文凭原版一模一样
原版定制【微信:bwp0011】《(unuk学位证书)英国牛津布鲁克斯大学毕业证硕士文凭》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
REPORT-PRESENTATION BY CHIEF SECRETARY, ANDAMAN NICOBAR ADMINISTRATION IN OA ...
Green Tribunal Andaman
Welcoming Wolves Back Home and the Effects of Manifest Destiny
Explore ideas based on manifest destiny, why we don't own the land, and how ranchers can learn to live with wolves.
一比一原版美国堪萨斯大学毕业证（KU学位证）如何办理
原件一模一样【微信：WP101A】【美国堪萨斯大学毕业证（KU学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国堪萨斯大学毕业证（KU学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国堪萨斯大学毕业证（KU学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国堪萨斯大学毕业证（KU学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国堪萨斯大学毕业证（KU学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Notes on National Green Tribunal, Environmental laws
Notes on National Green Tribunal, Environmental laws
GFW Office Hours: How to Use Planet Imagery on Global Forest Watch_June 11, 2024
Earlier this year, we hosted a webinar on Deforestation Exposed: Using High Resolution Satellite Imagery to Investigate Forest Clearing.
If you missed this webinar or have any questions about Norway’s International Climate & Forests Initiative (NICFI) Satellite Data Program and Planet’s high-resolution mosaics, please join our expert-led office hours for an overview of how to use Planet’s satellite imagery on GFW, including how to access and analyze the data.
一比一原版(unuk毕业证书)英国诺丁汉大学毕业证如何办理
原版一模一样【微信：741003700 】【(unuk毕业证书)英国诺丁汉大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(unuk毕业证书)英国诺丁汉大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(unuk毕业证书)英国诺丁汉大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(unuk毕业证书)英国诺丁汉大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(unuk毕业证书)英国诺丁汉大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Emerging Earth Observation methods for monitoring sustainable food production
Presented by Daniela Requena Suarez, Helmholtz GeoResearch Center Potsdam (GFZ) at "Side event 60th sessions of the UNFCCC Subsidiary Bodies - Sustainable Bites: Innovating Low Emission Food Systems One Country at a Time" on 13 June 2024
按照学校原版(UAL文凭证书)伦敦艺术大学毕业证快速办理
挂科购买【(UAL毕业证书)伦敦艺术大学毕业证】【176555708微信号】留学假毕业证成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Republic of Ethiopia EPA (2003) Ambient Environment Standards for Ethiopia.pdf
Republic of Ethiopia EPA (2003) Ambient Environment Standards for Ethiopia.pdf
一比一原版美国加州大学欧文分校毕业证（uci学位证）如何办理
原件一模一样【微信：WP101A】【美国加州大学欧文分校毕业证（uci学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国加州大学欧文分校毕业证（uci学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国加州大学欧文分校毕业证（uci学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国加州大学欧文分校毕业证（uci学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国加州大学欧文分校毕业证（uci学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
Exploring low emissions development opportunities in food systems
Exploring low emissions development opportunities in food systems
Monitor indicators of genetic diversity from space using Earth Observation data
Monitor indicators of genetic diversity from space using Earth Observation data
BASIC CONCEPT OF ENVIRONMENT AND DIFFERENT CONSTITUTENET OF ENVIRONMENT
BASIC CONCEPT OF ENVIRONMENT AND DIFFERENT CONSTITUTENET OF ENVIRONMENT
REPORT-PRESENTATION BY CHIEF SECRETARY, ANDAMAN NICOBAR ADMINISTRATION IN OA ...
REPORT-PRESENTATION BY CHIEF SECRETARY, ANDAMAN NICOBAR ADMINISTRATION IN OA ...
Welcoming Wolves Back Home and the Effects of Manifest Destiny
Welcoming Wolves Back Home and the Effects of Manifest Destiny
Notes on National Green Tribunal, Environmental laws
Notes on National Green Tribunal, Environmental laws
GFW Office Hours: How to Use Planet Imagery on Global Forest Watch_June 11, 2024
GFW Office Hours: How to Use Planet Imagery on Global Forest Watch_June 11, 2024
Green Wealth Management - UBS A world of access and opportunuty
Green Wealth Management - UBS A world of access and opportunuty
Emerging Earth Observation methods for monitoring sustainable food production
Emerging Earth Observation methods for monitoring sustainable food production
Republic of Ethiopia EPA (2003) Ambient Environment Standards for Ethiopia.pdf
Republic of Ethiopia EPA (2003) Ambient Environment Standards for Ethiopia.pdf
Grainsizeanalysis1 140815030613-phpapp01
- 1. SIEVE ANALYSIS (IS 2720 PART4) Sawanpreet Singh Anoop Singh Engineering Soil Testing
- 2. Objectives Classification of Soil Coefficient of curvature Uniformity coefficient Fineness Modulus
- 3. Applications Gradation of soil: Well graded Poorly graded Proportioning of soil for mix design Design of filters
- 4. Theory If more than 50% of sample is retained on IS Sieve 4.75mm, sample is gravel If more than 50% of sample passes through IS Sieve
- 5. Theory Coefficient of Curvature : Cc = D30 2 D10 x D60 Between 1 -3 : Well graded gravel and sand
- 6. Theory Uniformity Coefficient : Cu = D60 D10 More than 4 - Well graded gravel More than 6 – Well graded sand (IS 1498 - 1970)
- 7. Theory Fineness modulus (FM) : sum of total percentage of the FM = sample retained on each sieve 100 2 – 4 : fine soil
- 8. Apparatus Two set of sieves: Set1: IS sieves of size 300mm, 80mm, 40mm, 20mm, 10mm, 4.75mm Set 2 : IS sieves of size 2mm,0.85mm,0.425mm,0.15mm,0.075mm Mechanical Shaker Brush Oven
- 9. Procedure For sample retaining on 4.75mm sieve , Use set 1 – 5kg sample For sample passing through 4.75mm sieve, Use set 2 – 1kg sample
- 10. Procedure Clean all the sieves and pan properly with brush. Arrange the sieves according to size, with pan at bottom and size increasing upwards. Put the sample in top sieve and Place it in the shaker. Ensure that the sieves are held tightly in the shaker.
- 11. Procedure Operate the shaker for 5-10 minutes. Weight the material retained on each sieve to nearest 1 gram.
- 13. Precautions While drying, the temperature of oven should not be more than 105°C because higher temperature may cause permanent change in 0.075mm material. During shaking, soil sample should not be allowed to come out. For plotting, percent finer should be determined with respect to total soil taken for
- 16. Observations and Calculations IS Sieve 0.600m m
- 17. Observations and Calculations IS Sieve 0.300mm
- 18. Observations and Calculations IS Sieve 0.150mm
- 19. Observations and Calculations IS Sieve 0.075mm
- 23. Result
- 25. Thank You!!