dearness allowance. In the context of a changing pattern of prices and consumption, real wages of the workmen are likely to fluctuate greatly. Ultimately, it is the good
The Second World War, too, repeated the same economic inflation and again the demand for increased D.A. was made by the industrial workers. It is to be noted here that the main reason for keeping the D.A. as a separate component and not merging it in the wages, was due to the fact that the employers always considered the D.A. increase as a temporary feature and expected such allowance to be adjusted downward, if the cost of living restored. But their hope was never fulfilled and the D.A. continued to remain as a separate component which could be raised with the rise in the price index number. This element of D.A. is also found in some of the early reports like the Report of Rau Court of Inquiry which was constituted in the year 1940 under the provisions of the Trade Disputes Act, 1929 to investigate the dearness allowance of railway employees. Subsequently, Justice Rajadhyaksha Award given in 1946 in the trade dispute between the Post Telegraph Department and its non-gazetted employees, the Central Pay Commission 1947, the Committee on Fair Wages, 1948, the Bank Award Commission, 1955, the Second Pay Commission, 1959, the Dass Commission, 1965 and the Gajendragatkar Commission, 1967, all approved and recommended payment of D.A. as a separate component of the earning of the workers. The Wage-Boards also generally sought to keep the D.A. as a separate component although some of them recommended the merger of D.A. with the basic wage.
Foreign Countries Experience
It is interesting to note that the practice of paying D.A. as a separate component appears to he confined only to India and some Asian countries and similar concept is not found elsewhere in other industrial countries. However in other countries to meet the demand of the increase cost of living, the real wages themselves are revised to provide for the desired level of standard of living. Some wage agreements contain ‘escalator clause’ to provide for the review of wages in the event of increase in price index. Such
practice is common in USA, Italy and Scandinavian countries. In Japan cost of living allowance and rent allowance is comprised in the wages. In some countries the wage agreements provided for the increase in wage as a separate component linked with the increase in the price index. In India such increase is referred as ‘Dearness Allowance’ keeping it as 3 component distinct from the wages. There are different pros and cons of retaining D.A. as a separate component in India as it would give flexibility in the determination of the quantum of D.A. corresponding to the increase in the Price Index number and to achieve desirable level of neutralisation.
Overtime Payment
Working overtime in industry is possibly as old as the industrial revolution. The necessity of the managements’ seeking overtime working from employees
The detailed synopsis of QMS. It will definitely surpass, your desire to streamline, implement and brainstorm Quality Management in your organization. Perhaps, the 8 core principles of QMS is applicable for everyone and everywhere .
Quality Management System awareness for all ANUPAM RAY
I covered benefit and utilization ISO 9001:2015 standard, 8 quality principle, Root cause analysis, what is ISO, and basic auditing principle. Kindly comment and let me know how I can improve this.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
More Related Content
Similar to GE8077 Total Quality Management UNIT 5 Notes.pdf
The detailed synopsis of QMS. It will definitely surpass, your desire to streamline, implement and brainstorm Quality Management in your organization. Perhaps, the 8 core principles of QMS is applicable for everyone and everywhere .
Quality Management System awareness for all ANUPAM RAY
I covered benefit and utilization ISO 9001:2015 standard, 8 quality principle, Root cause analysis, what is ISO, and basic auditing principle. Kindly comment and let me know how I can improve this.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
1. UNIT 5 QUALITY SYSTEMS
Need for ISO 9000 and Other Quality
Systems, ISO 9000:2000 Quality
System – Elements, Implementation
of Quality System, Documentation,
Quality Auditing, QS 9000, ISO 14000
– Concept, Requirements and
Benefits.
.
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
2. WHAT IS ISO
• ISO- The International Organization for
Standardization was established in 1946 in Geneva,
Switzerland.
• ISO is a non- governmental organization have an
association of National standards Bodies of more
than 150 countries.
• ISO is a specialized agency of maintaining the
quality standards internationally.
• The set of rules and procedures are developed by a
system of technical committees, sub- committees
and working team to an international standards.
• In India, the Bureau of Indian Standards (BIS) is the
national standard body represented on ISO.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
3. THE OBJECTIVE OF ISO
• The objective of ISO is to promote the development of
standardization and related activities in the world with a view
to facilitating international exchange of goods and services,
and to developing cooperation in the spheres of intellectual,
scientific, technological and economic activity.
• The results of ISO technical work are published as
International Standards.
• Bureau of Indian Standards (BIS) is the Indian representative
of ISO.
• ISO is the world‟s largest developer of standards that makes a
positive difference, not just to engineers and manufacturers for
whom they solve basic problems in production and
distribution, but to society as a whole.
• ISO provide governments with a technical base for health,
safety and environmental legislation.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
4. • ISO – 9000 is mainly concerned with “Quality
management”. This means what the organisation
takes an initiative to achieve:
– Customer’s quality requirements.
– Continuous improvement of the quality performance.
– Effective involvement of employees.
• ISO – 14000 is mainly concerned with the
“Environment management”. This means what
the organisation takes an initiative to:
– Minimize harmful development effect on the
environment caused by the several activities involved in
an organisation.
– Maintain sustain development in order to reduce the
environmental degradation.
– Achieve continuous improvement in the environment
system in order to protect the environment.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
5. ISO 9000 STANDARDS
ISO 9000
Guidelines on selection and use of quality management and
quality assurance standard
ISO 9001 Applicable for the industries which are doing their own design and
development, production, installation and servicing. It has 20
elements. (Design, Development, Production, Installation &
Servicing )
ISO 9002 Applicable for the units excluding R & D functions. It has 18
elements. (Production, Installation & Servicing )
ISO 9003 It covers the final inspection and testing for laboratories and
warehouses etc., it has 12 elements(
Inspection & Testing )
ISO 9004 It provides guidelines to interpret the quality management and
quality assurance. (Provides guidelines on the technical,
administrative and human factors affecting the product or
services. )
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
6. BENEFITS OF ISO 9000 STANDARDS
• Achievement of international standard of quality.
• Higher productivity.
• Value for money.
• Customer satisfaction.
• Growth of the organization
• Competitive advantage in the global market.
• Increased profitability
• Improved corporate image
• Access to global market.
• Consistency in quality.
• Higher morale of employees
• Increased job satisfaction.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
7. ISO 9004:2000
• The title Quality Management Systems is ISO 9004:2000-
Guidance for Performance Improvement.
• It provides guidance on quality management systems as a
means for continual improvement of processes that contribute
to the satisfaction of an organization‟s customers and other
interested parties.
• The eight quality management principles are defined in ISO
9000:2000, Quality management systems Fundamentals and
vocabulary, and in ISO 9004:2000, Quality management
systems guidelines for performance improvements.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
8. GUIDELINES FOR PERFORMANCE
MEASUREMENT ISO 9000:2000
1. Customer Focus
Organizations depends on their customers and therefore should understand current
and future customer needs, should meet customer requirements and strive to
exceed customer expectations.
KEY BENEFITS
• Increased revenue.
• Increased customer satisfaction
• Improved customer loyalty.
2 . Leadership
• Leaders establish unity of purpose and direction of the organization. They should
create and maintain the internal environment in which people can become fully
involved in achieving the organization‟s objectives
KEY BENEFITS
• Employee motivation
• Minimization in miscommunication between the levels of organization.
• Activities are evaluated, aligned and implemented.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
9. 3. People involvement
People at all levels are the essence of an essence of
organization and their full involvement enables their
abilities to be used for the organization‟s benefit.
KEY BENEFITS
• People involvement, commitment and motivation within
organization.
• Innovation and creativity in furthering the organization‟s
objectives.
• People performance being accounted.
• People‟s participation.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
10. 4.Process approach
A desired result is achieved more efficiently when activities
and related resources are managed as a process.
KEY BENEFITS
• Lower cost and shorter cycle times through use of
resources.
• Improved, consistent and predictable results.
• Focused and prioritized improvement opportunities.
5. System approach to management
Identifying, understanding and managing interrelated
processes as a system contributed to the organization‟s
effectiveness and efficiency in achieving its objectives
KEY BENEFITS
• Integration and alignment of the process.
• Ability to focus on the key process.
• Provide confidence to interested parties.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
11. 6. Continuous improvement
Continual improvement of the organization‟s overall performance should be a permanent
objective of the organization.
KEY BENEFITS
• Performance advantage.
• Alignment of improvement activities at all levels
• Flexibility to react quickly to opportunities.
7. Factual approach to decision making
Effective decisions are based on the analysis of data and information
KEY BENEFITS
• Informed decisions.
• Increased ability to demonstrate the effectiveness of past decisions through reference to
factual records.
• Increased ability to review, challenge, and change opinions and decisions.
8. Mutually beneficial supplier relationship
An organization and its suppliers are interdependent and a mutually beneficial relationship
enhances the ability of both to create value.
KEY BENEFITS
• Increased ability to
• Flexibility and speed of joint responses.
• Optimization of costs and resources
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
12. ELEMENT OF THE QUALITY SYSTEM
ISO – 9001 : 2000 standard has eight elements. These elements (clause) are listed below.
1. Scope
2. Normative reference
3. Terms and definitions
4. Quality management system (QMS)
a. General requirements
b. Documentation
5. Management responsibility
a. Management Commitment
b. Customer focus
c. Quality policy
d. Planning
e. Responsibility, Authority and communication
f. Management Review
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
13. 6. Resource management
a. Provision of management
b. Human resources
c. Infrastructure
d. Work environment
7. Product or service realization
a. Planning of product realization
b. Customer- related processes
c. Design and Development
d. Purchasing
e. Production and service provision
f. Control of monitoring and measuring devices
8. Measurement, Analysis and improvement
a. General
b. Monitoring and measurement
c. Controls of Non- conforming product
d. Analysis of Data
e. Improvement
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
14. Process based Quality Management System
5. Management
Responsibility
8.
Measurement,
Analysis and
improvement
6. Resource
Management
4. QMS continual
improvement
OUTPUT
product/ service
7. Product
realization
INPUT customer
requirement
Customer
Satisfaction
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
15. IMPLEMENTATION A QUALITY SYSTEM
1. Top Management Commitment
2. Appoint the Management Representative
3. Awareness
4. Appoint an Implementation Team
5. Training
6. Time Schedule
7. Select Element Owners
8. Review the Present System
9. Write the Documents
10. Install the New System
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
16. 11. Internal Audit
12. Management Review
13. Pre-assessment
14. Registration
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
17. DOCUMENTATION OF QUALITY SYSTEM
The required document for an organisation are:
1. Quality policy manual
2. Quality system
3. Work instructions or practices
4. Records.
Policy
Procedure
Work Instruction or
Practices
Records or proof
HOW
Records or proof
Evidence
WHO ,WHEN &
WHERE
WHY stated once
The Documentation pyramid
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
18. 1. Quality policy manual
– Quality policy manual is the top level of documentation. This document
defines ‘What will be done’ and ‘Why’.
– The ‘Why’ part can be stated just once as a quality policy statement. This
statement should be a short, clear, practical, easy to understand and
simple definition of the organisation’s quality intention.
– The policy manual state the quality policy and objective of an organisation.
Each part of the policy should be written within one page or less and
addressed individually.
2. Quality system
– The second level of documentation is the quality procedures. These
procedures describe the methods that will be adopted to obtain the policy that
has been already stated.
– These procedure are the confidential documents and therefore it can be used
in all area of organisation in order to ensure the quality of the system.
– The procedures include the following:
✓ Who should perform the specific task?
✓ When the task should be done?
✓ What task has been completed?
✓ Where the documentation is done?
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
19. 3. Work instructions or practices
– Work instruction are the third level of documentation. It gives about “How a task
should be done ?” “Who should undertake the task ?” and“ What records are to be
maintained ?”
– These instructions are written for the department, task, machine and product
activities.
– The work instructions are :
✓ Detailed drawing
✓ Route sheet
✓ Process sheet
✓ Photographs
✓ Video
✓ Specific job instruction
✓ Sample comparison of Non- conformity
4. Records
– Records are the bottom level of documentation that are used to show the policies,
procedures and work instructions stated before are being followed
– Records may be forms that are filled up, stamps of approval, signature and date on
the document etc.
– Records are evidence that are used to identify “ What activity has completed ?” and
“ Who has done it ?”. UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
20. BENEFITS OF DOCUMENTATION
1. It provides guidelines for managing the quality
system.
2. It provide formats and procedures for
standardizing practices.
3. It gives information for taking corrective action if
anything goes wrong.
4. It create confidence among the employees.
5. It satisfies the customer requirements.
6. It demonstrate the ISO quality system
certification.
7. It provide the basis for continual improvement.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
21. QUALITY AUDITING
• The term audit refers to a regular examination
and periodical checking of accounts or
adjustment of financial accounts and settlement
etc.
• It is also refers to checking, inspection and
verification of production processes.
• Definition - “ A Systematic and independent
examination to determine whether quality
activities and related results comply with planned
arrangements and whether these planned
arrangements are implemented effectively and
are suitable to achieve objective.”
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
22. FEATURES OF QUALITY AUDITING
i. The quality audit applies to quality systems or quality
elements such as product, processes and service etc. Such
audits are often called ‘Quality system’, ‘process quality
audits’, and ‘service quality audits’ respectively.
ii. Quality audits are carried by staff who are not directly
responsible in the areas being audited, but preferably
they should work in cooperation with relevant personnel.
iii. Quality audits may be conducted for internal or external
purposes. It is not necessary to cover the whole quality
system, at once, but may cover its elements.
iv. Quality audit is an information gathering activity but it is
not finding the mistake.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
23. OBJECTIVE OF QUALITY AUDITING
i. To establish a good quality system.
ii. To establish the conformity of the quality system
elements with regards to specified requirement.
iii. To determine the effectiveness of the implemented
quality system with regards to the specific quality
objective.
iv. To meet regularity requirements, if applicable.
v. To permit the listing of the audited organisation’s quality
system in a register for outside agency certification.
vi. To evaluate the organisation’s present quality system
against a standard quality system.
vii. To help the organisation for decision making purposes.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
24. TYPES OF QUALITY AUDITING
I. According to the nature of audit.
a. Internal Audit (or) First party audit
b. External Audit (or)
i. Second – party audit.
ii. Third – party audit.
II. According to the areas selected in an
organisation.
a. System Audit
b. Process Audit
c. Product Audit
d. Adequate Audit
e. Compliance Audit
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
25. i. Internal Audit (or) First party audit:
– The audit is carried out by the personnel within
the organisation. The personnel conducting the
audit is not directly connected with the process.
ii. Second – party audit:
– The audit is conducted by one organisation on
another organisation. The audit is performed by
customer on the supplier.
iii. Third – party audit:
– The audit is generally conducted by an
independent organisation or recognised certified
agencies for the purpose of accreditation
certification. UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
26. a. System Audit:
– The System audit is carried out in order to check all the activities of the
organisation (performance) according to the documented procedure.
– This audit can be performed either internally or externally. This audit is to
be conducted before a contract is given to a supplier.
– The audit should be done in order to evaluate the ability of the potential
supplier for providing the quality products.
b. Process Audit:
– Process audit checks that the manufacturing processes and testing
operations are performing according to the prescribed standards.
– This can be performed either can internally or externally. This involves
auditing processes such as turning, welding, brazing, coil winding,
painting etc.
c. Product Audit:
– The product audit is carried out to measure the level of conformity of the
product to a specified quality standards.
– This audit verifies the accuracy of the equipment and calibration process.
It may be conducted by the customer before delivering to their
requirementd. UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
27. d. Adequacy Audit (or) System management audit:
– To determine the extent to which the document system
represented by quality manual and the associated procedures
adequately meets the requirement of the customers.
e. Compliance Audit:
– It seeks to establish the extent to which the documented
system is implemented and observed by the work force of the
organisation in their various activities.
THE STAGES OFAN AUDIT
1. Information gathering 2. Preparation
3. Opening meeting 4. The audit process
5. The closing meeting 6. Audit report and completion
7. Corrective action and follow- up.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
28. QS 9000 QUALITY SYSTEM
• QS 9000 quality system was developed by the three
big U.S. automobile manufacturers – chrysler, Ford
and General motors in 1994.
• It is extension an extension of ISO – 9000 system
and has been developed specifically for automobile
industry.
• QS – 9000 replace the separate systems followed by
each of the automobile company and it makes the
suppliers to adopt one quality system that is
acceptable to all the automobile manufacturers.
• Thus QS – 9000 lays down a common set of
requirements for all automotive industries.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
29. Objectives of QS – 9000
– The goal of QS – 9000 is to develop fundamental quality system that provided
for continuous improvement, defect prevention, reduction in variations,
reduction in cycle time, waste eliminate, improved utilization of materials,
machines and man – power and man power, and customer satisfaction.
Clauses of QS – 9000
• Section I: ISO 9000 based requirement
• Section II: Automobile sector specific
requirement
• Section III: Customer specific requirement
Benefits of QS – 9000
1. It prevents the defects and thus reduction in variations.
2. It reduce the cycle time.
3. Improvement utilization of materials, machines and man power.
4. The company achieves the credibility as a high quality supplier of automotive
products.
5. Increased customer satisfaction.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
30. ISO 14000 – THE ENVIRONMENT
MANAGEMENT SYSTEM
• The International organisation for standards (ISO) has been
designed a comprehensive set of standards for environment
management (ISO 14000 series of standards) in 1992.
• The ISO 14000 standards aims a world wide focus on environment
and encouraging a cleaner, safer and healthier world for all.
• It allows the organisation to achieve the internationally criteria
with respect to environment.
• This standards build a global management system that allows the
organisation to effectively manage the environment
responsibilities, reduce liabilities, save costs and promotes the
organisation for the public.
• To compete with global market, it is very essential to get
environmental management certification.
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
31. Terminology used in ISO 14000 standards
1. Environment
2. Environment aspect
3. Environment impact
4. Environment objective
5. Environment target
ISO 14000 series of standards
1. Organisation evaluation standards
a. Environment Management systems (EMS)
b. Environment Auditing (EA)
c. Environment Performance Evaluation (EPS)
2. Product evaluation standards
a. Environment Aspects in product standards (EAPS)
b. Environment Labels and declarations (ELD)
c. Life Cycle Assessment (LCA)
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
32. CONCEPT OF ISO 14000
• The ISO 14000 series of standards can be applicable to all types
and sizes of organisations are designed to take into account of
diverse geographical, culture and social conditions.
• It is to be noted that the requirements of the standard are based on
the process but not on the product.
• The overall aim of the system is to provide continuous,
improvement, protection to the environment and to prevent
pollution.
Stages of EMS model:
1. Environment policy
2. 2. Planning
3. Implementation and operation
4. Checking and correction action
5. Management review UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
34. Requirement of ISO 14000
1. General requirement
2. Environment policy
3. Planning
a. Environment aspects
b. Legal and other requirements
c. Objective and targets
d. Environment management programs
4. Implementation and operation
a. Structure and responsibility
b. Training, awareness and competency
c. Communication
d. EMS documentation
e. Document control
f. Operation control and
g. Emergency preparedness and response.
5. Checking and correction action
a. Monitoring and measuring
b. Non – conformance, correction and prevention action
c. Records and
d. EMS audit
6. Management review
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360
35. BENEFITS of ISO 14000
GLOBAL BENEFITS
• Facilitate trade & remove trade barrier
• Improve environmental performance of planet earth
• Build consensus that there is a need for environmental management and a
common terminology for EMS
ORGANIZATIONAL BENEFITS
• Assuring customers of a commitment to environmental management
• Meeting customer requirement
• Improve public relation
• Increase investor satisfaction
• Market share increase
• Conserving input material & energy
• Better industry/government relation
• Low cost insurance, easy attainment of permits & authorization
UNIT V – QUALITY SYSTEMS
www.edubuzz360.com
https://play.google.com/store/apps/details?id=com.sss.edubuzz360