Flight Dental Systems Class B Autoclave - Clave BFLIGHT DENTAL
The document describes the Flight Class B Autoclave, a compact Class B steam sterilizer manufactured by Flight Dental Systems. It provides specifications for the autoclave, an overview of its features such as programmed sterilization cycles and safety mechanisms, and details on its technical components and maintenance requirements. The autoclave uses a vacuum pump and steam generator to perform fast sterilization cycles for unwrapped and wrapped instruments.
Flight Dental Systems Mobile Cart with CompressorFLIGHT DENTAL
Fully integrated Mobile Cat with built in compressor. Makes it a easy to use portable delivery unit that you can use for any application whether for dental, medical, veterinary uses. The ultra-quiet compressor can be used a smaller room having the noise of the unit overwhelm the patient.
This document discusses cleanrooms, including their features, standards, stages of cleanliness, and subsystems. Cleanrooms are controlled environments used in scientific research and lithography to control contamination. They maintain very low levels of environmental pollutants and particles through filtered air, temperature/humidity control, laminar airflow, and other subsystems like water, gas, and construction standards. Cleanrooms are classified based on particle counts using Federal and ISO standards for different stages of static, operational and as-built cleanliness.
20 economical ways to improve baghouse performancemkpq pasha
The document discusses 20 cost-effective ways to improve the performance of baghouse dust collectors. It outlines solutions that can provide immediate impact to performance without requiring a full rebuild. These include optimizing differential pressure through proper use of gauges, utilizing clean-on-demand systems, improving inlet design through baffling to reduce turbulence, and avoiding using the hopper for material storage which can cause re-entrainment issues negatively impacting filter bag life. Understanding these affordable modification options can help decision makers maximize performance at low cost.
This document provides information about services offered by 3 Tiger Industrial Services and their partners. 3 Tiger Industrial Services offers services such as refurbishing burners, supplying lighting, and fabricating boiler liner plates. They work with partners that provide air cooled condenser cleaning systems, internal heat exchanger cleaning, and manufacture air cooled condensers. The document describes the cleaning technologies and equipment offered by their partners AX Systems and KROK-EILAF for cleaning condensers and heat exchangers. It also provides an overview of air cooled condenser manufacturer Hamon Group.
Flight Dental Systems Class B Autoclave - Clave BFLIGHT DENTAL
The document describes the Flight Class B Autoclave, a compact Class B steam sterilizer manufactured by Flight Dental Systems. It provides specifications for the autoclave, an overview of its features such as programmed sterilization cycles and safety mechanisms, and details on its technical components and maintenance requirements. The autoclave uses a vacuum pump and steam generator to perform fast sterilization cycles for unwrapped and wrapped instruments.
Flight Dental Systems Mobile Cart with CompressorFLIGHT DENTAL
Fully integrated Mobile Cat with built in compressor. Makes it a easy to use portable delivery unit that you can use for any application whether for dental, medical, veterinary uses. The ultra-quiet compressor can be used a smaller room having the noise of the unit overwhelm the patient.
This document discusses cleanrooms, including their features, standards, stages of cleanliness, and subsystems. Cleanrooms are controlled environments used in scientific research and lithography to control contamination. They maintain very low levels of environmental pollutants and particles through filtered air, temperature/humidity control, laminar airflow, and other subsystems like water, gas, and construction standards. Cleanrooms are classified based on particle counts using Federal and ISO standards for different stages of static, operational and as-built cleanliness.
20 economical ways to improve baghouse performancemkpq pasha
The document discusses 20 cost-effective ways to improve the performance of baghouse dust collectors. It outlines solutions that can provide immediate impact to performance without requiring a full rebuild. These include optimizing differential pressure through proper use of gauges, utilizing clean-on-demand systems, improving inlet design through baffling to reduce turbulence, and avoiding using the hopper for material storage which can cause re-entrainment issues negatively impacting filter bag life. Understanding these affordable modification options can help decision makers maximize performance at low cost.
This document provides information about services offered by 3 Tiger Industrial Services and their partners. 3 Tiger Industrial Services offers services such as refurbishing burners, supplying lighting, and fabricating boiler liner plates. They work with partners that provide air cooled condenser cleaning systems, internal heat exchanger cleaning, and manufacture air cooled condensers. The document describes the cleaning technologies and equipment offered by their partners AX Systems and KROK-EILAF for cleaning condensers and heat exchangers. It also provides an overview of air cooled condenser manufacturer Hamon Group.
This document provides a procedure for conducting an air velocity test. The test is performed to determine airflow velocity, volume, and uniformity in a clean room, as well as to determine air supply flow rate. It outlines measuring air velocity for both unidirectional and non-unidirectional airflow, calculating air changes per hour, and recording measurement readings. Responsibilities and principles are defined, and the test procedure is described in steps.
This document provides an overview and introduction to HVAC systems for oral solid dosage manufacturing. It discusses the need for HVAC to protect products, personnel, and the environment. Proper HVAC system design and components are important for controlling temperature, humidity, and preventing contamination and cross-contamination. The document focuses on air filtration, airflow patterns like unidirectional and turbulent flow, and pressure differentials to prevent infiltration and cross-contamination between areas. Maintaining appropriate cleanroom classifications through HVAC in both operational and non-operational states is also covered.
ODM specialist, Olansi Healthcare Co.,Ltd, one of the leading supplier for MLM company in China, and focus on healthcare products of smart air purifier, high CADR air purifier, hydrogen water maker, hydrogen mini spray, and ODM project of disinfect water machine, household fruit and vegetable disinfectio machine,hypothermia treatment, etc.
This document provides information on Ecodair Microfilters and moisture separators that provide dry air for machine tools. Ecodair offers 10 standard models of dry air compressors to meet various needs, with features like long life, anti-corrosion coating, and low maintenance. Machine manufacturers prefer Ecodair because it offers important safety features to protect machines from issues caused by dirty air like downtime and product defects. Ecodair dryers remove moisture and contaminants from compressed air to provide clean, dry air required for precise machining.
In this 4-part series, AM Technical Solution’s very own Emil Bordelon, a NEBB Certified Professional, outlines the four main elements of a cleanroom that are considered during the design, certification and maintenance phases.
http://amcleanroombuild.com/
This document provides guidance on selecting the appropriate tank cleaning device. It discusses the differences between rotary spray cleaners and rotary jet cleaners, with jet cleaners providing higher mechanical force using less water. The document describes various models of rotary spray cleaners and jet cleaners from Alfa Laval for different sized tanks, including their recommended pressures, temperatures, and certifications. It concludes by introducing Central States Industrial as a distributor of sanitary processing equipment.
This document provides an overview of cleanroom design and HVAC system design for controlling the internal environment in cleanrooms. It discusses cleanroom standards and classifications, sources of contamination, types of clean areas, key HVAC design parameters, and recommendations for design parameters for different cleanroom classes according to ISO and federal standards. The document contains tables outlining particle size standards, applications for different cleanroom classes, required testing procedures, and recommended air changes per hour, filter types and efficiencies for ISO classes 1 through 8.
Dentists know that a functional sterilizer is essential to a safe, productive dental practice. Instruments need to be processed safely, correctly, and quickly so that you can serve your patients without interruption. But with the hectic hustle and bustle of a typical day at the office, it's easy to forget to give your sterilizer the attention it deserves.
Sterilizers, like cars, need preventative care and regular maintenance, and this becomes more important the older they get. Neglecting to care for and maintain your sterilizer and expecting it to chug along without issue will result in frustration, lost time (and money), and costly repairs.
But there's no need to beat yourself up yet or worry too much. Start treating your dental sterilizer right today by reviewing these operation and maintenance guidelines for three popular autoclave sterilizers: STATIM 2000 and 5000 units, Midmark Ultraclave units, and Pelton & Crane units.
One way AMTS is “Constructing an Intelligent Tomorrow” is through the work of our Cleanroom Performance Solutions group. In this 4-part series, our very own Emil Bordelon, a NEBB Certified Professional, outlines the four main elements of a cleanroom that are considered during the design, certification and maintenance phases.
http://amcleanroombuild.com/
Important of clean room and hvac systemRonak654321
This document discusses the importance of clean rooms and HVAC systems in pharmaceutical industries. It provides definitions of clean rooms, describes different clean room classifications according to ISO and FS209E standards, and lists various contamination sources and methods to control contamination. It also explains the key components and functions of HVAC systems used to provide controlled environmental conditions like temperature, humidity and airflow in clean rooms.
The document provides an overview of clean rooms, including their purpose, key components, classification standards, and importance in the pharmaceutical industry. A clean room is a controlled environment designed and maintained to reduce contamination through strict control of particulate matter and other pollutants. Clean rooms are classified based on standards like ISO and use HEPA filters to purify air circulation. Proper clean room certification and validation is important for ensuring safety and quality in pharmaceutical manufacturing as required by cGMP guidelines.
TSE Two Square Ecotechnologies provides air pollution control and management systems for industrial applications. It designs and manufactures systems like dust extraction, fume scrubbing, and ventilation using fabric filter bag houses. Bag houses remove dust from industrial processes in sectors like cement, steel, and mining. TSE bag houses use pulse jet or reverse air cleaning and come in online, offline, and insertable configurations for applications across industries. TSE has successfully installed systems for many Indian companies.
This document outlines the validation process for an HVAC system used in a pharmaceutical plant. It discusses the need for HVAC systems to control contamination and provide comfortable working conditions. The validation process includes creating a validation master plan, writing user requirement specifications, designing and qualifying the system, installing and qualifying it, operating and performance qualifications, and requalification. Key validation parameters that are measured include air flow, room air changes, filter integrity, pressure differentials, particulate counts, temperature and humidity controls, and air flow patterns.
This document provides a performance qualification protocol for a compressed air with drier system. It outlines objectives, responsibilities, prerequisites, safety precautions, and describes the system. The validation methodology section details tests that will be performed to qualify the system, including oil content, water vapor, carbon monoxide, non-viable particle count, and viable particle count tests. Acceptance criteria for each test are provided. The validation plan matrix lists sampling points. Documentation and record keeping requirements are also described. The protocol is intended to validate that the compressed air system generates and distributes air meeting specified quality attributes.
The document provides an overview of cleanroom and cleanzone protocols. It discusses cleanroom basics like definitions, components, construction stages, apparel requirements and other protocols. The key aspects covered are preventing dust entry, minimizing dust generation, removing dust, and not accumulating or scattering dust. Cleaning protocols like daily and regular cleaning are also summarized. The document aims to educate people on cleanroom requirements and practices to maintain cleanliness.
This document provides information about kitchen ventilation systems. It discusses the types of buildings that require kitchen ventilation such as hotels, restaurants, hospitals, etc. It covers the design of kitchen ventilation systems including components like exhaust hoods, exhaust fans, ductwork, filters and makeup air systems. The document provides guidelines for calculating exhaust air flow rates based on the type of cooking equipment. It also discusses best practices for installation and maintenance of kitchen ventilation systems for effective capture and removal of heat, effluents and grease from commercial kitchens.
Refrigeration air dryers remove moisture from compressed air to prevent damage. Using dryers results in higher product quality, lower maintenance costs, energy savings, and longer life for pneumatic equipment. Dryers require low maintenance and have few components subject to stress. They provide quality air drying through efficient components and automatic operation.
This document discusses environmental control and air handling systems in pharmaceutical manufacturing. It covers factors like temperature, humidity, air movement and contamination that can impact product quality. Uncontrolled environments can lead to product degradation or contamination. Cross-contamination can be minimized through personnel procedures, adequate facilities, cleaning and protection of products. Proper heating, ventilation and air conditioning (HVAC) systems are important to control airborne particles and microbes and maintain room conditions. Monitoring of HVAC systems includes testing for particulates, filter integrity, air changes and microbiological levels.
The document provides guidelines on good manufacturing practices for heating, ventilation and air conditioning (HVAC) systems for non-sterile oral solid dosage facilities. It discusses various aspects of HVAC system design including product protection, personnel protection, and environmental protection. Some key points include:
- HVAC systems should be designed to prevent contamination and cross-contamination through control of air filtration levels, air flows, pressures differentials between rooms and other methods.
- Areas are classified based on levels of protection from Level 1 to Level 3. Level 3 areas require the strictest controls on environmental conditions.
- Uni-directional air flows and positive or negative pressure cascades between areas help control contamination risks.
LAE comfort space 6-7 man towable welfare unitConor Ellison
The LAE Comfort Space is a compact, lightweight, 6-person welfare unit that meets HSE standards. It features a canteen area, toilet/washroom, and generator/drying room. Power is provided by an integrated 6KVA diesel generator. Additional features include a rotational jockey wheel, toilet skylight, and ram props. It is designed for easy transport and setup with a single axle and low towing weight of 1740kg.
This is our air conditioning spare parts catalog for global market in 2017.
Any info please contact kenny@dukeplus.com or 0086 156 9208 0195.
Thanks for your reading.
This document provides a procedure for conducting an air velocity test. The test is performed to determine airflow velocity, volume, and uniformity in a clean room, as well as to determine air supply flow rate. It outlines measuring air velocity for both unidirectional and non-unidirectional airflow, calculating air changes per hour, and recording measurement readings. Responsibilities and principles are defined, and the test procedure is described in steps.
This document provides an overview and introduction to HVAC systems for oral solid dosage manufacturing. It discusses the need for HVAC to protect products, personnel, and the environment. Proper HVAC system design and components are important for controlling temperature, humidity, and preventing contamination and cross-contamination. The document focuses on air filtration, airflow patterns like unidirectional and turbulent flow, and pressure differentials to prevent infiltration and cross-contamination between areas. Maintaining appropriate cleanroom classifications through HVAC in both operational and non-operational states is also covered.
ODM specialist, Olansi Healthcare Co.,Ltd, one of the leading supplier for MLM company in China, and focus on healthcare products of smart air purifier, high CADR air purifier, hydrogen water maker, hydrogen mini spray, and ODM project of disinfect water machine, household fruit and vegetable disinfectio machine,hypothermia treatment, etc.
This document provides information on Ecodair Microfilters and moisture separators that provide dry air for machine tools. Ecodair offers 10 standard models of dry air compressors to meet various needs, with features like long life, anti-corrosion coating, and low maintenance. Machine manufacturers prefer Ecodair because it offers important safety features to protect machines from issues caused by dirty air like downtime and product defects. Ecodair dryers remove moisture and contaminants from compressed air to provide clean, dry air required for precise machining.
In this 4-part series, AM Technical Solution’s very own Emil Bordelon, a NEBB Certified Professional, outlines the four main elements of a cleanroom that are considered during the design, certification and maintenance phases.
http://amcleanroombuild.com/
This document provides guidance on selecting the appropriate tank cleaning device. It discusses the differences between rotary spray cleaners and rotary jet cleaners, with jet cleaners providing higher mechanical force using less water. The document describes various models of rotary spray cleaners and jet cleaners from Alfa Laval for different sized tanks, including their recommended pressures, temperatures, and certifications. It concludes by introducing Central States Industrial as a distributor of sanitary processing equipment.
This document provides an overview of cleanroom design and HVAC system design for controlling the internal environment in cleanrooms. It discusses cleanroom standards and classifications, sources of contamination, types of clean areas, key HVAC design parameters, and recommendations for design parameters for different cleanroom classes according to ISO and federal standards. The document contains tables outlining particle size standards, applications for different cleanroom classes, required testing procedures, and recommended air changes per hour, filter types and efficiencies for ISO classes 1 through 8.
Dentists know that a functional sterilizer is essential to a safe, productive dental practice. Instruments need to be processed safely, correctly, and quickly so that you can serve your patients without interruption. But with the hectic hustle and bustle of a typical day at the office, it's easy to forget to give your sterilizer the attention it deserves.
Sterilizers, like cars, need preventative care and regular maintenance, and this becomes more important the older they get. Neglecting to care for and maintain your sterilizer and expecting it to chug along without issue will result in frustration, lost time (and money), and costly repairs.
But there's no need to beat yourself up yet or worry too much. Start treating your dental sterilizer right today by reviewing these operation and maintenance guidelines for three popular autoclave sterilizers: STATIM 2000 and 5000 units, Midmark Ultraclave units, and Pelton & Crane units.
One way AMTS is “Constructing an Intelligent Tomorrow” is through the work of our Cleanroom Performance Solutions group. In this 4-part series, our very own Emil Bordelon, a NEBB Certified Professional, outlines the four main elements of a cleanroom that are considered during the design, certification and maintenance phases.
http://amcleanroombuild.com/
Important of clean room and hvac systemRonak654321
This document discusses the importance of clean rooms and HVAC systems in pharmaceutical industries. It provides definitions of clean rooms, describes different clean room classifications according to ISO and FS209E standards, and lists various contamination sources and methods to control contamination. It also explains the key components and functions of HVAC systems used to provide controlled environmental conditions like temperature, humidity and airflow in clean rooms.
The document provides an overview of clean rooms, including their purpose, key components, classification standards, and importance in the pharmaceutical industry. A clean room is a controlled environment designed and maintained to reduce contamination through strict control of particulate matter and other pollutants. Clean rooms are classified based on standards like ISO and use HEPA filters to purify air circulation. Proper clean room certification and validation is important for ensuring safety and quality in pharmaceutical manufacturing as required by cGMP guidelines.
TSE Two Square Ecotechnologies provides air pollution control and management systems for industrial applications. It designs and manufactures systems like dust extraction, fume scrubbing, and ventilation using fabric filter bag houses. Bag houses remove dust from industrial processes in sectors like cement, steel, and mining. TSE bag houses use pulse jet or reverse air cleaning and come in online, offline, and insertable configurations for applications across industries. TSE has successfully installed systems for many Indian companies.
This document outlines the validation process for an HVAC system used in a pharmaceutical plant. It discusses the need for HVAC systems to control contamination and provide comfortable working conditions. The validation process includes creating a validation master plan, writing user requirement specifications, designing and qualifying the system, installing and qualifying it, operating and performance qualifications, and requalification. Key validation parameters that are measured include air flow, room air changes, filter integrity, pressure differentials, particulate counts, temperature and humidity controls, and air flow patterns.
This document provides a performance qualification protocol for a compressed air with drier system. It outlines objectives, responsibilities, prerequisites, safety precautions, and describes the system. The validation methodology section details tests that will be performed to qualify the system, including oil content, water vapor, carbon monoxide, non-viable particle count, and viable particle count tests. Acceptance criteria for each test are provided. The validation plan matrix lists sampling points. Documentation and record keeping requirements are also described. The protocol is intended to validate that the compressed air system generates and distributes air meeting specified quality attributes.
The document provides an overview of cleanroom and cleanzone protocols. It discusses cleanroom basics like definitions, components, construction stages, apparel requirements and other protocols. The key aspects covered are preventing dust entry, minimizing dust generation, removing dust, and not accumulating or scattering dust. Cleaning protocols like daily and regular cleaning are also summarized. The document aims to educate people on cleanroom requirements and practices to maintain cleanliness.
This document provides information about kitchen ventilation systems. It discusses the types of buildings that require kitchen ventilation such as hotels, restaurants, hospitals, etc. It covers the design of kitchen ventilation systems including components like exhaust hoods, exhaust fans, ductwork, filters and makeup air systems. The document provides guidelines for calculating exhaust air flow rates based on the type of cooking equipment. It also discusses best practices for installation and maintenance of kitchen ventilation systems for effective capture and removal of heat, effluents and grease from commercial kitchens.
Refrigeration air dryers remove moisture from compressed air to prevent damage. Using dryers results in higher product quality, lower maintenance costs, energy savings, and longer life for pneumatic equipment. Dryers require low maintenance and have few components subject to stress. They provide quality air drying through efficient components and automatic operation.
This document discusses environmental control and air handling systems in pharmaceutical manufacturing. It covers factors like temperature, humidity, air movement and contamination that can impact product quality. Uncontrolled environments can lead to product degradation or contamination. Cross-contamination can be minimized through personnel procedures, adequate facilities, cleaning and protection of products. Proper heating, ventilation and air conditioning (HVAC) systems are important to control airborne particles and microbes and maintain room conditions. Monitoring of HVAC systems includes testing for particulates, filter integrity, air changes and microbiological levels.
The document provides guidelines on good manufacturing practices for heating, ventilation and air conditioning (HVAC) systems for non-sterile oral solid dosage facilities. It discusses various aspects of HVAC system design including product protection, personnel protection, and environmental protection. Some key points include:
- HVAC systems should be designed to prevent contamination and cross-contamination through control of air filtration levels, air flows, pressures differentials between rooms and other methods.
- Areas are classified based on levels of protection from Level 1 to Level 3. Level 3 areas require the strictest controls on environmental conditions.
- Uni-directional air flows and positive or negative pressure cascades between areas help control contamination risks.
LAE comfort space 6-7 man towable welfare unitConor Ellison
The LAE Comfort Space is a compact, lightweight, 6-person welfare unit that meets HSE standards. It features a canteen area, toilet/washroom, and generator/drying room. Power is provided by an integrated 6KVA diesel generator. Additional features include a rotational jockey wheel, toilet skylight, and ram props. It is designed for easy transport and setup with a single axle and low towing weight of 1740kg.
This is our air conditioning spare parts catalog for global market in 2017.
Any info please contact kenny@dukeplus.com or 0086 156 9208 0195.
Thanks for your reading.
AirSept Aftermarket Training Presentation 1-24-11 PDFMyron Stein
This document provides information about AirSept, Inc., a company that offers products for odor abatement and repair of vehicle air conditioning, transmission, and other systems. It lists AirSept's headquarters and offices around the world, its product offerings which include solutions for A/C repair and odor removal, and its accomplishments including awards and patents held. It also provides details on some of AirSept's proprietary product lines like Line Splice, Compressor Guard, and Cooling Coil Coating.
There is abundant fresh water in the air according to
the test. Each cube air has 5qram fresh water when the
relative humidity is 50%.It can’t be used up and can fully
satisfy people’s request of drinking water.
The technology of taking out water from the air is used
for dealing with the drinking water problems of some
places where are short of fresh water or in water pollution.
The document provides information on HiCOP heat pump products, including their showcase products, qualification certificates, working principle, heating price performance ratio compared to other systems, use of high-efficiency heat pump technology, and air to water heat pump models. Key details include the heat pump's high COP of up to 4, ability to heat water to 60°C, use of renowned compressor and fan brands for quiet operation, and working in environments as cold as -10°C.
Catálogo sobre a clarificadora da SPX.
SPX Seital hermetic separators remove residual yeast and other non-soluble solids quickly and efficiently without impacting the flavor and aroma of the beer.
Current and evolving customer needs always come first at Seital Separation Technology. Via close collaboration with our customers, an innovative approach and cutting-edge R&D we design, evelop and deliver best-in-class separation solutions for the brewing industry that deliver
superior quality and efficiency at the lowest possible cost.
ELGi, established in 1960, designs and manufactures a wide range of air compressors. The company has gained its reputation for design and
manufacture of screw compressors through strategic partnerships and continuous research and development.Over the years, it has emerged as a
multi-product,multi-market enterprise providing total compressed air solutions in all segments. ELGi’s design capabilities translated into a wide
range of products ranging from oil-lubricated and oil-free rotary screw compressors,reciprocating compressors and centrifugal compressors. ELGi
has its own manufacturing operations in India, Italy and USA with subsidiaries in Australia, Brazil, UAE and Indonesia. The company is fast
expanding its global footprint attracting distributors and customers with its latest generation products.
The document describes the T17 high-performing battery rider scrubber. It highlights key features such as large battery capacity for extended runtime, durable construction to withstand harsh environments, and ec-H2O technology for effective cleaning. The scrubber aims to reduce cleaning costs through productivity and durability while also improving safety and facility image. It provides easy operation and maintenance through features like intuitive controls and yellow touch points. Optional configurations allow customization to meet different customer needs.
Horne OPTITHERM Thermostatic Mixing Tap - Specification ManualThorne & Derrick UK
This document is a 2012 specification manual for the OPTITHERM thermostatic tap produced by Horne Engineering Ltd. It includes product specifications, dimensioned drawings, images and 3D animations that explain how the tap operates, is cleaned, maintained and improves water quality. The manual provides information on the tap's design for safe hot water delivery, infection control, installation, commissioning, performance testing, maintenance, water system management and options. Accessories for maintenance and compliance with water quality standards are also detailed.
Esco Evidence Drying Cabinet is a negative pressure cabinet designed to provide security, tamper proof, and prevent loss of integrity and credibility and possible cross-contamination of evidence and impede any harmful airborne pathogens, putrid odors, and other gases from escape that may harm or infect employees/technicians.
Pneumatics – Choose the Best Valve for Optimum PerformanceDesign World
Every application has unique requirements and functionality. Choosing the best pneumatic valve for the best performance requires knowing how to select based on specifications. The specifications are based on many factors from the type of valve design to the flow of the flow of the valve. This webinar covers the basic valve designs and the best applications for their design. You will learn when an air piloted valve is used versus a solenoid piloted valve, the difference between direct acting solenoid valves from indirect acting solenoid valves and when they are best applied in a project and how quality of air, size and speed contribute to the valve selection. What is Cv? How do response times and fill and exhaust help with valve specifications? Lastly, you will learn how to determine valve failure issues. Overall, this webinar provides technical and practical ways to properly specify a valve and how to troubleshoot in the event one should fail. You will learn:
Design types features & benefits
Types of actuation
Sizing/Flow rates (speed)
Fail safe
The SenseTek automatic purge unit is designed to automatically clean the pipes of Stratos aspirating fire detection systems on a programmed schedule. It uses compressed air to blow through the pipes to remove pollutants. It has a PLC controller with 7 cleaning programs of varying intervals and can be powered by the detector's power supply. It is suitable for heavy polluted environments like warehouses, production facilities, and stables to prevent the pipes from clogging and extend the life of the detector's filter.
Foshan Oslon Electrical Appliance Technology co., LTD is a Chinese company located in Foshan City, Guangdong Province that specializes in designing, manufacturing, and selling consumer electronics and household appliances. It has over 100 employees with over 17 years of experience in product design, research and development, prototyping, tooling, and production. The company's main product lines include humidifiers, DC fans, air coolers, and heaters.
The document describes the Midmark M9 and M11 UltraClave® automatic sterilizers. It discusses that the sterilizers make sterilization reliable and efficient with intuitive displays and simple cycle selection. Once sterilization is complete, the door automatically opens to dry instruments quickly. The M9 and M11 offer different capacities and features to meet sterilization needs.
The document discusses lubrication systems for blanks and coils. It describes the components, advantages, and customization options of DieTronic lubrication machines, including controlled dosing systems, effective aspiration to reduce oil mist, modular manifolds with close-spaced nozzles, and adjustable software parameters. Customer feedback noted reduced downtime and scrap by 30-40% after installing new lubrication systems.
The right pressure transmitter can enhance production. The key to maximizing the return on oil and gas development projects rests with the maintenance and safety of your—sometimes—aging equipment.
Biteman Technology, the leading supplier and manufacturer of modular unit desiccant air dryer and filter in China, with patents in its easier replace modular unit, perfectly solve the problems what traditional air dryers have, widely applied in many industries all over the world.
The document discusses Gerni's NEPTUNE line of hot water pressure washers. It describes several models - the NEPTUNE 7 for industrial tasks, NEPTUNE 5 as a professional solution, NEPTUNE 4 for reliable cleaning, and NEPTUNE 2 for compact use. All models feature an EcoPower boiler for low fuel consumption, SilentPower pumps for quiet operation, and durability. Specifications and technical details are provided for each model.
This document provides an overview of clean-in-place (CIP) systems for cleaning process equipment. It discusses what CIP is, the advantages it provides over manual cleaning, and the key factors to consider in CIP system design including temperature, time, chemicals, mechanics, water quality, and monitoring systems. It also covers different types of CIP systems such as boil out, total loss, single use recirculation, and re-use systems. Design of the process equipment and piping is also discussed to enable effective cleaning.
Similar to Flight Dental Systems Autoclave- Sterilizer - Class N rev. 2.0 (20)
Flight x vision powerpoint presentationFLIGHT DENTAL
The Flight X-Vision Portable Handheld Dental X-Ray uses a state of the art X-Ray Generator made by Canon in Japan, that is compact and ultra safe. This allows the X-Vision to be a powerful unit but remain lightweight and portable. The ergonomic design allows the x-ray to be comfortably held in your hands and with one of the most intuitive and easy to use interfaces it makes doing a full mouth series easier and more efficient. In addition, the X-Vision features one of the longest lasting batteries on the market for handheld dental x-rays with a high quality Panasonic Lithium Ion Battery that is able to produce up to 800+ exposures in one charge. The X-Vision is safe, effective, lightweight and will make traditional wall mounted intraoral x-rays obsolete in the coming years.
Flight Dental MK Dent Handpieces - Low Speed and High SpeedFLIGHT DENTAL
Highspeed Handpiece from MK Dent Germany. High quality affordable High speed handpieces with ceramic bearings. Compatible with Kavo. Sold exclusively by Flight Dental Systems in Canada.
Flight Defender Aerosol Evacuator features a high powered suction that can evacuate aerosols created during a dental procedure. The aerosols are captured and filtered through a 3 Layer HEPA Filtration system and a UV-C Light for Disinfection. This device is a vital part of the dental operatory to eliminate aerosols and purify he air in the operatory at a fast rate.
Flight Dental Systems A6 Radius Presentation 2019FLIGHT DENTAL
Flight Dental Systems manufactures dental equipment including the A6 Radius Package. The package includes a hydraulic lift electric tilt patient chair, mounted delivery unit and LED light, and touchpad controls. Optional upgrades are available. The delivery unit uses DCI compatible components and pneumatic handpieces. An assistant instrumentation package with a touchpad is also included. The LED light provides a rectangular shadowless pattern. Flight Dental Systems is committed to providing high quality affordable dental equipment.
The document describes the Exorvision 24" Denclarity medical grade monitor. It features a low-voltage LED screen with a brightness of 440 nits that is easy to disinfect, has a water-sealed front, and includes inputs for HDMI, VGA, audio, and a TV tuner. The monitor has a 1920x1080 resolution display, 1000:1 contrast ratio, 5ms response time, and ports for power, audio, USB, and mounting via VESA standard. It is intended for use in medical and dental settings like operating rooms and examination areas.
Flight dental systems a12 presentation 2016 rev. 3.0FLIGHT DENTAL
A12 Hydraulic Dental Chair - Flight Dental Systems, Ambidextrous, LED Light, - Very reliable - Similar in design to Adec, Thin Backrest, Thin Seatrest, Ergonomic and comfortable for long procedures. Available and sold through all major distributors and dealers in USA and Canada
Flight dental systems a6 operatory presentation 2016 r.3FLIGHT DENTAL
A6 Hybrid Dental Chair - Hydraulic Base for Great Lift Capacity. Electric Backrest for superior positioning and faster positioning. Excellent dental chair for Canadian and USA market. Affordable and Reliable.
Flight dental systems a2 operatory presentation 2016 r.2FLIGHT DENTAL
This document provides information about Flight Dental Systems and their A2 operatory system. Flight Dental Systems is a Canadian manufacturer and distributor of dental equipment with over 25 years of experience. Their A2 operatory system offers an affordable, reliable, and easy to use solution for dental offices, including an electro-mechanical patient chair, LED light, delivery unit, and touchpad controls.
Flight dental systems i view led camera presentation FLIGHT DENTAL
Flight Dental Systems is happy to introduce the new iView Camera and Light. The LED Light incorporates a Full HD Camera for recording, live Streaming and capturing pictures. The Dental light and Camera offers the best technology in the industry and can be used in universities, dental schools, hospitals and private practices. It can be used to magnify and enhance images or simply to document and record procedures. The applications are limitless. They can be used in implantology, endodontics, Ortho, periodontics and many more.
Flight Dental Systems - Gcomm iView Camera and LED LIght Installation InfoFLIGHT DENTAL
Flight introduces the Gcomm iView light and Camera system featuring a Full HD Camera and a 90 CRI Reflected LED light. Includes a touchpad control and also a iPad app for light and Camera control. Use the system as a stand alone recording and imaging device or connect it to your computer for superior and stunning Full HD Camera Capture to your server or hard Drive.
Flight dental systems single and dual track light presentation 2015FLIGHT DENTAL
Single and Dual Track Light - Dental Operatory - Medical - Hospital - Made in Canada - Parallel Track Light System - Unobstructed Track Mount - Patent Pending Dual Trolley System - Option for Light and Monitor and Dual LIght Options - Excellent for patient comfort - Smoothest and Most Reliable Track Light System
Flight Dental Systems - A2 Operatory PresentationFLIGHT DENTAL
A2 Operatory Presentation - Flight Dental Systems- Canadian owned and Operated Dental Chair and Delivery Unit Manufacturer - With sales in over 25 countries and growing. Licensed to sell in Europe, Canada, USA, Mexico, Australia and Saudi Arabia. Contact us for more details if you have any inquires
Flight Dental Systems Sales Presentation 2015 rev. 2.0FLIGHT DENTAL
Flight Dental Systems features an extensive product line that includes, dental chairs , dental lights, dental led curing lights, LED Curing Lights, LED Operating Lights, Delivery Units, Ceiling Mounted lights, track lights and scalers. We are a trusted and well recognized dental chair manufacturer base in Brampton Canada.
Flight Dental Systems A12 Presentation 2015 rev. 2.0FLIGHT DENTAL
Flight Dental Systems - New and Improved A12 Operatory Systems - Featuring a Fully Hydraulic Dental unit and Radius Delivery Unit. - Most ergonomically designed dental chair. comfortable and reliable
Flight Dental Systems A6 Operatory Presentation 2015 rev. 2.0FLIGHT DENTAL
This document describes the A6 Operatory System, including its features and benefits. The system includes a hybrid dental chair with hydraulic base and electro-mechanical backrest, touchpad controls, LED light, and ceramic cuspidor. It also has a delivery system with assistant instruments, touchpad control, and rotating cuspidor. Key features are noted for the chair, light, delivery system, and new optional upgrades. A five-year warranty and simple, durable design are highlighted as benefits.
Flight dental systems mobile cart presentation 2013FLIGHT DENTAL
This document summarizes the specifications and features of a mobile dental cart. The cart has an adjustable height steel U-frame from 24 to 31.5 inches. It features twin casters, a beige baked paint finish, and components for delivering air, water, and power to dental handpieces. The delivery system includes individual pressure controls for three handpieces, a foot pedal control, syringe, and DCI compatible components like tubing and blocks to control water flow to each handpiece. Installation instructions are also provided.
Flight dental systems handpiece presentation websiteFLIGHT DENTAL
This document describes the Bold Series handpiece collection from Flight Dental Systems. It has a push button chuck, works at 350,000 RPM, and has an LED light that is 25,000 lux and 5,500K temperature. Key features include a patented electric generator to power the direct LED, superior chuck strength from 35-45N, anti-retraction functionality, and Barden bearings. The handpiece saves costs long-term versus fiber optic models due to avoiding replacement of bulbs, rods, and downtime. It comes with a 1-year warranty and 6-month turbine warranty.
Flight dental systems a12 presentation uk jan 2014FLIGHT DENTAL
Flight Dental Systems is a Canadian manufacturer and distributor of dental equipment operating in over 25 countries. Their mission is to provide high quality, affordable dental products along with excellent customer service. Their A12 operatory system features an adjustable hydraulic patient chair, delivery systems compatible with DCI components, and customizable assistant instrumentation. The system is designed for operator ergonomics and comfort. Installation of the A12 system includes assembling parts, testing chair functions, and adjusting settings like air pressure and soft limits.
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptxHolistified Wellness
We’re talking about Vedic Meditation, a form of meditation that has been around for at least 5,000 years. Back then, the people who lived in the Indus Valley, now known as India and Pakistan, practised meditation as a fundamental part of daily life. This knowledge that has given us yoga and Ayurveda, was known as Veda, hence the name Vedic. And though there are some written records, the practice has been passed down verbally from generation to generation.
Rasamanikya is a excellent preparation in the field of Rasashastra, it is used in various Kushtha Roga, Shwasa, Vicharchika, Bhagandara, Vatarakta, and Phiranga Roga. In this article Preparation& Comparative analytical profile for both Formulationon i.e Rasamanikya prepared by Kushmanda swarasa & Churnodhaka Shodita Haratala. The study aims to provide insights into the comparative efficacy and analytical aspects of these formulations for enhanced therapeutic outcomes.
Local Advanced Lung Cancer: Artificial Intelligence, Synergetics, Complex Sys...Oleg Kshivets
Overall life span (LS) was 1671.7±1721.6 days and cumulative 5YS reached 62.4%, 10 years – 50.4%, 20 years – 44.6%. 94 LCP lived more than 5 years without cancer (LS=2958.6±1723.6 days), 22 – more than 10 years (LS=5571±1841.8 days). 67 LCP died because of LC (LS=471.9±344 days). AT significantly improved 5YS (68% vs. 53.7%) (P=0.028 by log-rank test). Cox modeling displayed that 5YS of LCP significantly depended on: N0-N12, T3-4, blood cell circuit, cell ratio factors (ratio between cancer cells-CC and blood cells subpopulations), LC cell dynamics, recalcification time, heparin tolerance, prothrombin index, protein, AT, procedure type (P=0.000-0.031). Neural networks, genetic algorithm selection and bootstrap simulation revealed relationships between 5YS and N0-12 (rank=1), thrombocytes/CC (rank=2), segmented neutrophils/CC (3), eosinophils/CC (4), erythrocytes/CC (5), healthy cells/CC (6), lymphocytes/CC (7), stick neutrophils/CC (8), leucocytes/CC (9), monocytes/CC (10). Correct prediction of 5YS was 100% by neural networks computing (error=0.000; area under ROC curve=1.0).
Cell Therapy Expansion and Challenges in Autoimmune DiseaseHealth Advances
There is increasing confidence that cell therapies will soon play a role in the treatment of autoimmune disorders, but the extent of this impact remains to be seen. Early readouts on autologous CAR-Ts in lupus are encouraging, but manufacturing and cost limitations are likely to restrict access to highly refractory patients. Allogeneic CAR-Ts have the potential to broaden access to earlier lines of treatment due to their inherent cost benefits, however they will need to demonstrate comparable or improved efficacy to established modalities.
In addition to infrastructure and capacity constraints, CAR-Ts face a very different risk-benefit dynamic in autoimmune compared to oncology, highlighting the need for tolerable therapies with low adverse event risk. CAR-NK and Treg-based therapies are also being developed in certain autoimmune disorders and may demonstrate favorable safety profiles. Several novel non-cell therapies such as bispecific antibodies, nanobodies, and RNAi drugs, may also offer future alternative competitive solutions with variable value propositions.
Widespread adoption of cell therapies will not only require strong efficacy and safety data, but also adapted pricing and access strategies. At oncology-based price points, CAR-Ts are unlikely to achieve broad market access in autoimmune disorders, with eligible patient populations that are potentially orders of magnitude greater than the number of currently addressable cancer patients. Developers have made strides towards reducing cell therapy COGS while improving manufacturing efficiency, but payors will inevitably restrict access until more sustainable pricing is achieved.
Despite these headwinds, industry leaders and investors remain confident that cell therapies are poised to address significant unmet need in patients suffering from autoimmune disorders. However, the extent of this impact on the treatment landscape remains to be seen, as the industry rapidly approaches an inflection point.
Adhd Medication Shortage Uk - trinexpharmacy.comreignlana06
The UK is currently facing a Adhd Medication Shortage Uk, which has left many patients and their families grappling with uncertainty and frustration. ADHD, or Attention Deficit Hyperactivity Disorder, is a chronic condition that requires consistent medication to manage effectively. This shortage has highlighted the critical role these medications play in the daily lives of those affected by ADHD. Contact : +1 (747) 209 – 3649 E-mail : sales@trinexpharmacy.com
These lecture slides, by Dr Sidra Arshad, offer a quick overview of the physiological basis of a normal electrocardiogram.
Learning objectives:
1. Define an electrocardiogram (ECG) and electrocardiography
2. Describe how dipoles generated by the heart produce the waveforms of the ECG
3. Describe the components of a normal electrocardiogram of a typical bipolar lead (limb II)
4. Differentiate between intervals and segments
5. Enlist some common indications for obtaining an ECG
6. Describe the flow of current around the heart during the cardiac cycle
7. Discuss the placement and polarity of the leads of electrocardiograph
8. Describe the normal electrocardiograms recorded from the limb leads and explain the physiological basis of the different records that are obtained
9. Define mean electrical vector (axis) of the heart and give the normal range
10. Define the mean QRS vector
11. Describe the axes of leads (hexagonal reference system)
12. Comprehend the vectorial analysis of the normal ECG
13. Determine the mean electrical axis of the ventricular QRS and appreciate the mean axis deviation
14. Explain the concepts of current of injury, J point, and their significance
Study Resources:
1. Chapter 11, Guyton and Hall Textbook of Medical Physiology, 14th edition
2. Chapter 9, Human Physiology - From Cells to Systems, Lauralee Sherwood, 9th edition
3. Chapter 29, Ganong’s Review of Medical Physiology, 26th edition
4. Electrocardiogram, StatPearls - https://www.ncbi.nlm.nih.gov/books/NBK549803/
5. ECG in Medical Practice by ABM Abdullah, 4th edition
6. Chapter 3, Cardiology Explained, https://www.ncbi.nlm.nih.gov/books/NBK2214/
7. ECG Basics, http://www.nataliescasebook.com/tag/e-c-g-basics
Basavarajeeyam is an important text for ayurvedic physician belonging to andhra pradehs. It is a popular compendium in various parts of our country as well as in andhra pradesh. The content of the text was presented in sanskrit and telugu language (Bilingual). One of the most famous book in ayurvedic pharmaceutics and therapeutics. This book contains 25 chapters called as prakaranas. Many rasaoushadis were explained, pioneer of dhatu druti, nadi pareeksha, mutra pareeksha etc. Belongs to the period of 15-16 century. New diseases like upadamsha, phiranga rogas are explained.
Basavarajeeyam is a Sreshta Sangraha grantha (Compiled book ), written by Neelkanta kotturu Basavaraja Virachita. It contains 25 Prakaranas, First 24 Chapters related to Rogas& 25th to Rasadravyas.
- Video recording of this lecture in English language: https://youtu.be/kqbnxVAZs-0
- Video recording of this lecture in Arabic language: https://youtu.be/SINlygW1Mpc
- Link to download the book free: https://nephrotube.blogspot.com/p/nephrotube-nephrology-books.html
- Link to NephroTube website: www.NephroTube.com
- Link to NephroTube social media accounts: https://nephrotube.blogspot.com/p/join-nephrotube-on-social-media.html
TEST BANK For Community Health Nursing A Canadian Perspective, 5th Edition by...Donc Test
TEST BANK For Community Health Nursing A Canadian Perspective, 5th Edition by Stamler, Verified Chapters 1 - 33, Complete Newest Version Community Health Nursing A Canadian Perspective, 5th Edition by Stamler, Verified Chapters 1 - 33, Complete Newest Version Community Health Nursing A Canadian Perspective, 5th Edition by Stamler Community Health Nursing A Canadian Perspective, 5th Edition TEST BANK by Stamler Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Pdf Chapters Download Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Pdf Download Stuvia Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Study Guide Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Ebook Download Stuvia Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Questions and Answers Quizlet Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Studocu Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Quizlet Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Stuvia Community Health Nursing A Canadian Perspective, 5th Edition Pdf Chapters Download Community Health Nursing A Canadian Perspective, 5th Edition Pdf Download Course Hero Community Health Nursing A Canadian Perspective, 5th Edition Answers Quizlet Community Health Nursing A Canadian Perspective, 5th Edition Ebook Download Course hero Community Health Nursing A Canadian Perspective, 5th Edition Questions and Answers Community Health Nursing A Canadian Perspective, 5th Edition Studocu Community Health Nursing A Canadian Perspective, 5th Edition Quizlet Community Health Nursing A Canadian Perspective, 5th Edition Stuvia Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Pdf Chapters Download Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Pdf Download Stuvia Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Study Guide Questions and Answers Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Ebook Download Stuvia Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Questions Quizlet Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Studocu Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Quizlet Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Stuvia
2. Flight Dental Systems
History
Flight Dental Systems is a Canadian owned and managed dental equipment
manufacturer and distributor with operations in over 25 countries around the world.
Our company was founded on a commitment to deliver high quality products that
provide the design, function and durability demanded by today's dental professionals
at an affordable price.
Mission
To provide our customers with high quality products designed and engineered in
Canada at an affordable price. Along with our excellent customer service and expert
knowledge of the product from the top to bottom makes for better support for our
products globally.
Designed to make sit down dentistry even easier and more ergonomic for the
operator.
Motto
Quality and reliability meets affordability. First Class has never been so affordable.
3. OUR LOCATION:
Flight Dental Systems
21 Kenview Blvd, Unit 9
Brampton, ON L6T 5G7
Canada
Tel: 1 905 799 0517
Fax: 1 905 793 2406
Email: info@flightdentalsystems.com
Website: www.flightdentalsystems.com
5. What is Class N
Steam Sterilizers?
A Class N Sterilizer or also known as a positive pressure
displacement autoclave uses steam to displace all of the air in
the sterilization chamber before sterilization. The steam is
released into a chamber using an independent steam generator
in a pressurized blast, forcing the air out through the drain hole
and starting the sterilization process. This results in a more
accurate displacement of air than a downward displacement
unit which uses a heating element that is submerged in
water.
6. Key Differences with
Traditional Sterilizers
Traditional Sterilizers use a Heating Element the heats up
water to create the steam for a downward displacement of air
Example – Midmark M9 and M11, Tuttanauer EZ9 and EZ11
Drawbacks: Not 100% accurate as air may not be
completely removed
Results in improper sterilization
Additional Maintenance to clean chamber, heating
elements and other parts due to mineral build-up
Results: Reduced heating efficiency, easily blocked
or clogged pipes
8. Flight Steam Sterilizers
Faster Heating Time with Immediate Steam Generation
More complete removal of air with small bursts of steam injected into
chamber
Less maintenance then sterilizers using a heating element
This is an Example Only.
9. Clave16
Manual Door with
Safety Locking
Switch
LCD Screen with
Easy Program
Selection
USB Key
Printer Connection
Waste Water Drain
Distilled Water
Reservoir
Power Switch
10. Clave16
Key Features:
Class N Steam Sterilizer
5 Programmed Sterilizations Cycles: Solid/Unwrapped, Wrapped,
Liquid, Textile, Prions
Solid Steel Construction
Independent Steam Generator for positive pressure displacement
Easy to repair – Quality Parts Made in Europe
Optional Printer
USB Port for Recording Cycles
Double Door Protection System – Prevents door from opening during
Cycles
Pressure Safety valve
11. Model: Clave16
Chamber Size 16L (9” x 14.2”)
Number of Trays 3
Voltage 110v 50/60 Hz
Power (W) 2200
Overall Dimensions (WxHxD) 17.5” x 16.1” x 23.8”
Programmed Cycle Solid/Unwrapped: 4 Min Sterilization
@ 134C, 20 min Sterilization @121C
Total Time: 14 min
Wrapped: 10 Min @134C, 30 min @
121C
Total Time: 30min
Liquid/Textile/Rubbers: 10 min @
134C, 30 min @ 121C
Total Time: 30 min
14. Clave16
Chamber Size:
Volume: 16L
Dimensions: 9” x 14.2”
Trays: 3 Stainless Steel Trays
Distilled Water Reservoir
Easily accessible and easy
to fill
Water Level Sensor
Capacity to run 5-6 Cycles
Before Adding water
15. Clave16
Key Selling Points:
Fast Sterilization Cycles Unwrapped: 4min, Wrapped: 10
min, Rubber/Textiles: 10min
Local Inventory, Technical Support and Spare Parts
Inventory
Larger Chamber compared to Statim with Similar
Sterilization Time
2 Year Parts Warranty
16. Clave23
Manual Door with
Safety Locking
Switch
LCD Display
Touchpad Control
Distilled Water
Drain
Waste Water
Drain
Distilled Water
Reservoir
Power Switch
USB Port
Optional Printer
Connection
17. Clave23
Key Features:
Class N Steam Sterilizer
5 Programmed Sterilizations Cycles: Solid/Unwrapped, Wrapped,
Liquid, Textile, Prions
Solid Steel Construction
Independent Steam Generator for positive pressure displacement
Easy to repair – Quality Parts Made in Europe
Optional Printer
USB Port for Recording Cycles
Double Door Protection System – Prevents door from opening during
Cycles
Pressure Safety valve
18. Model: Clave23
Chamber Size 23L (9.72”x 23.6”)
Number of Trays 3 or 4
Voltage 110V 50/60Hz
Power (W) 2200
Overall Dimensions (WxHxD) 18.9” x 18.3” x 27.6”
Programmed Cycle Solid/Unwrapped: 4 Min Sterilization
@ 134C, 20 min Sterilization @121C
Total Time: 24 min
Wrapped: 10 Min @134C
30 min @ 121C
Total Time: 45min
Liquid/Textile/Rubbers: 10 min @
134C, 30 min @ 121C
Total Time: 35 min
21. Key Selling Points:
Fast Sterilization Cycles Unwrapped: 4min, Wrapped: 10
min, Rubber/Textiles: 10min
Local Inventory, Technical Support and Spare Parts
Inventory
Larger Chamber compared to Statim with Similar
Sterilization Time
2 Year Parts Warranty
Clave23
22. Quality Control
Strict Testing and Quality Control at Each stage of Assembly
Each Device is Loop Tested using a computer operated
monitoring system
Problem Analysis
25. Technical Info
Compact Class N Steam Sterilizer
Lots of space for easy servicing of
parts
Independent water pump, steam
generator, Heat Exchanger,
Solenoid Valves
Chamber made with High Quality
Stainless Steel
28. Technical Info
Heat Exchanger
Able to rapidly cool exhausted
steam for ventilation
Solenoid Valves
Quality Solenoid Valves for
controlling water and pressure
release
29. Technical Info
Distilled Water Reservoir
Distilled water reservoir with filter
Water Level Sensor
Waste Water Reservoir
Waste water Reservoir with filter
Water Level Sensor
30. Technical Info
Door Lock Safety Mechanism
Dual Safety Door Lock Sensor
Prevents door from opening during
Cycle
Will not allow cycle to start if door
not closed
Power Safety Prevention
Power shuts off automatically if
there is a surge
34. Flight Clave16 Tuttnauer
EZ9Plus
Midmark M9 Statim 2000 G4
Chamber Size
(Diameter x
Length)
9” x 14.2”
Volume: 16L
9” x 18” 9” x 15” 11.1”L x 7.1”W
x 1.4” H
Volume: 1.8L
Sterilization
Time
Unwrapped @134C:4 min
Total: 14 min
Wrapped@134C: 4 min
Total: 20 min
Rubber/Plastics
@134C:10 min
Total: 30 min
Unwrapped @134C:3 min
Total: 20 min
Wrapped@134C: 4 min
Total: 17 min
Rubber/Plastics @134C:?
min
Total: ? min
Unwrapped @134C:3 min
Total: 14 min
Wrapped@134C: 5 min
Total: 17 min
Packs @121C:30 min
Total: 40 min
Unwrapped @134C:3.5
min
Total: 6 min
Wrapped@134C: 10 min
Total: 14 min
Rubber/Plastics
@134C:15 min
Total: 20 min
Warranty 2 Year 2 Year 1 Year 1 Year
MSRP MSRP:$4500.00 Sale: $7295.00
MSRP:$8400.00
Schein: $7615
MSRP:$8136.00
Sale: $6145.00
MSRP:
$6428.00
35. Flight Clave23 Tuttnauer
EZ11Plus
Midmark M11 Statim 5000
G4
Chamber Size
(Diameter x
Length)
9.75” x 23.6”
Volume: 23L
11” x 19.8” 11” x 18” 15”L x 7.1”W x
3”H
Volume: 5.1L
Sterilization
Time
Unwrapped @134C:4 min
Total: 14 min
Wrapped@134C: 4 min
Total: 20 min
Rubber/Plastics @134C:10
min
Total: 30 min
Unwrapped @134C:3 min
Total: 24 min
Wrapped@134C: 4 min
Total: 21 min
Rubber/Plastics @134C:?
min
Total: ? min
Unwrapped @134C:3 min
Total: 18 min
Wrapped@134C: 5 min
Total: 22 min
Rubber/Plastics @121C:30
min
Total: 44 min
Unwrapped @134C:3.5
min
Total: 9 min
Wrapped@134C: 6 min
Total: 17.5 min
Rubber/Plastics
@134C:15 min
Total: 24 min
Warranty 2 Year 2 Year 1 Year 1 Year
MSRP MSRP:$5500.00 Schein:8295.00
MSRP: $8867.00
Sale: $9055.00
MSRP:$9673
Schein:
$6995.00
MSRP:
$7317.00
36. Comparison
Key Comparisons:
Fast Sterilization for Larger Chamber Tabletop Autoclave
3x Larger Chamber size compared to Statim
Industry Leading 2 Year Warranty
Uses Steam Generator therefore less distilled water requirement
and more complete elimination of air inside chamber with a
steam generator
Tuttnauer and Midmark use a heating element to heat water to
create the downward displacement to force air out of chamber
Drawbacks: Mineral Build-up and blockage, Reduced
efficiency of heating element over time, more maintenance
required
Chance that not all the air is evacuated, resulting in
ineffectiveness of sterilization
37. Maintenance
Frequency Maintenance Required
Daily Clean Door Seal
Clean the External Surface
Weekly Clean Distilled Water Reservoir
Clean Sterilization Chamber
Monthly Clean Filter inside Chamber and Tank
Every 3/6 Months Replace Door Seal
Every Year Replace Silicone Tubing, filters and door Seal
Every 2 Years Replace Battery on Main PCB that Controls Timer