This document provides guidance on selecting the appropriate tank cleaning device. It discusses the differences between rotary spray cleaners and rotary jet cleaners, with jet cleaners providing higher mechanical force using less water. The document describes various models of rotary spray cleaners and jet cleaners from Alfa Laval for different sized tanks, including their recommended pressures, temperatures, and certifications. It concludes by introducing Central States Industrial as a distributor of sanitary processing equipment.
Validation of Tangential Flow Filtration in Biotech ProcessesMerck Life Sciences
Watch the presentation of this webinar here: https://bit.ly/3hUKfd7
The objective of validation of a unit operation is to demonstrate with a high degree of confidence that the process performs consistently. The present seminar will focus on the validation of the unit operation of TFF and will provide an overview of the regulatory landscape, the validation master plan, approaches to membrane re-use, cleaning validation, and best practices.
In this webinar, you will learn:
• Validation of TFF
• Validation master plan
• Membrane reuse and cleaning
• TFF scale down models
Speaker: Dr. Subhasis Banerjee,
Principal Technical Application Expert, Bioprocessing APAC
NeoSeal Adhesive is manufacturer and supplier of the finest quality solvent cement for PVC, UPVC (PVC-U), CPVC and ABS piping system. NeoSeal products are used for potable water, irrigation, SWR, conduit, sewer, drain, waste and vent system in agriculture, residential, commercial and industrial plumbing applications. We offer a complete line of solvent cement in the industry with products specifically formulated for a wide variety of applications.
Validation of Tangential Flow Filtration in Biotech ProcessesMerck Life Sciences
Watch the presentation of this webinar here: https://bit.ly/3hUKfd7
The objective of validation of a unit operation is to demonstrate with a high degree of confidence that the process performs consistently. The present seminar will focus on the validation of the unit operation of TFF and will provide an overview of the regulatory landscape, the validation master plan, approaches to membrane re-use, cleaning validation, and best practices.
In this webinar, you will learn:
• Validation of TFF
• Validation master plan
• Membrane reuse and cleaning
• TFF scale down models
Speaker: Dr. Subhasis Banerjee,
Principal Technical Application Expert, Bioprocessing APAC
NeoSeal Adhesive is manufacturer and supplier of the finest quality solvent cement for PVC, UPVC (PVC-U), CPVC and ABS piping system. NeoSeal products are used for potable water, irrigation, SWR, conduit, sewer, drain, waste and vent system in agriculture, residential, commercial and industrial plumbing applications. We offer a complete line of solvent cement in the industry with products specifically formulated for a wide variety of applications.
Scalability of a Single-use Bioreactor Platform for Biopharmaceutical Manufac...KBI Biopharma
Increasing adoption of single-use technologies for bioprocessing along with higher titers from cell culture bioreactor processes has allowed clinical and even commercial manufacturing to be successfully performed in 2000 L-scale single-use bioreactors. Several biopharmaceutical manufacturers have successfully adopted single-use bioreactors for production. However, information about process scalability from glass bioreactors to 2000 L single-use bioreactors for different types of CHO cell lines is not widely available. Here we provide an overview of the key
differences between single-use and conventional stainless steel bioreactors, and highlight factors that are employed while scaling-up from small-scale glass bioreactors to 2000 L-scale single-use bioreactors. Several case studies focusing on process performance across scales into single-use bioreactors are provided. This analysis confirms that the 2000 L-scale single-use bioreactorsystem can be robustly employed for biopharmaceutical manufacturing.
Process Intensification for future bioprocessingMilliporeSigma
Watch the interactive recording here: https://bit.ly/2OdLYwX
Process optimization and upstream intensification led to smaller, more efficient biomanufacturing facilities becoming more commonplace, with smaller facilities comprised primarily of single use or hybrid technology capable of producing significant amounts of drug product. Such changes, however, bring new challenges, like managing the supply of huge amounts of cell culture media or buffers within smaller footprints. In this webinar two topics will be addressed that help to intensify upstream and downstream processes and address the challenges of future facilities.
Bulk powders of cell culture media (CCM) or single chemicals often show physical disadvantages. CCM powders with fine particles show high dust formation and poor flowability. In addition, dissolution is time consuming due to floating of light particles on the water surface. For the pursued intensification of upstream processing, media preparation times are becoming a serious bottleneck. This mainly accounts for the much higher media consumption or higher concentrated media formulations for future continuous upstream processes. Granulated material can overcome limitations with CCM powder, while additionally being a viable option to reduce caking of bulk chemicals like buffers.
Buffer production for downstream processing remains a significant portion of the facility footprint, labor needs and equipment cost. As downstream operations are essentially product-mass-based, increased productivity in upstream will lead to a proportional increase in demand for downstream buffers. Merck KGaA Darmstadt, Germanty R&D has their expertise in concentration of buffers to improve and streamline buffer management.
Selection, sizing, and operation of bioprocess filtration trains for optimal ...Merck Life Sciences
To increase filter lifetime and improve the economics of filtering bioprocess streams, a prefilter is often installed upstream of a final sterilizing-grade filter. However, determining the economic optimum prefilter and final filter configuration can be challenging. Numerous prefilter options are available, the prefilter to final filter area ratio must be determined, and operating conditions must be selected that will both satisfy the filtration requirements and provide for an economical process that minimizes the filtration system footprint.
One approach towards achieving an optimal filtration system design is to test the bioprocess fluid with several filter configuration combinations and at a range of operating conditions. However, this can be a daunting task and even impractical given the high cost and limited availability of valuable bioprocess fluids. A better approach is to run a limited filtration trial and use a mathematical model that can accurately predict the behavior of the prefilter and final filter under different conditions.
In this webinar we describe a filtration model and test methodology to rapidly and efficiently design an optimal dual-stage filtration process. The model and methodology were applied to Milligard® PES filters, a new class of autoclavable and gamma sterilizable PES membrane prefilters that are designed to protect microfiltration and nanofiltration final filters in bioprocess streams. We show how a model fit to the data from one set of filtration conditions can be used to predict filtration performance at other prefilter to final filter area ratios and operating conditions, and to determine the economic optimum filtration configuration.
In this webinar, you will learn:
- How filters for microfiltration of biological fluids work.
- The effect of operating conditions on filtration performance.
- How to design an optimal series filtration (prefilter and final filter) process.
Single-Use Tangential Flow Filtration for Closed ProcessingMerck Life Sciences
Watch the presentation of this webinar here: https://bit.ly/3b7vD60
Closed processing involves use of physical barriers to separate processing fluid from the external environment. This approach reduces capital expenditures and clean room classification while accelerating time to market. This webinar will present a TFF process run in a closed mode.
Closed processing with single-use technologies is a critical enabler for efficient and robust manufacturing for novel modalities as well as continuous biomanufacturing processing. It can also reduce the dependence on classified clean rooms for traditional modalities. This approach helps to mitigate the risk of contamination by adventitious agents while enhancing operator safety.
In this presentation, we discuss the implementation of closed processing for downstream applications and present the design and performance testing of a single use manufacturing-scale tangential flow filtration system to be able to operate in both functionally and fully closed mode.
In this webinar, you will learn:
• The context of closed processing
• Differences between closed and functionally closed processing
• The drivers for adoption
• Its practical implementation to a TFF step
Modern BioManufacturing: Single-Use Technologies in Configurable, Prefabricat...Merck Life Sciences
A co-webinar describing a solution to biopharma's challenge of rapidly and rationally expanding capacity by employing single-use technologies, a templated process train, and pre-fabricated mobile/modular cleanrooms.
Biopharmaceutical companies on the verge of investing into manufacturing or facilities expansion face many questions and challenges. Speed, agility, and flexibility are becoming more critical to executing their changing production and distribution strategies. Platform facility designs which integrate the latest process technologies within innovative pre-fabricated cleanrooms are critical for addressing the trending desire to implement 'clonable' modular facilities that can be delivered in a timely fashion across multiple locations. Companies like Merck KGaA, Darmstadt, Germany and G-CON Manufacturing are working together to combine their technologies and develop simple yet robust platform solutions for industry.
As bioprocessing technologies intensify performance, volumetric requirements become less. As such, 2000L single-use bioreactors - or multiple bioreactors of similar or less volumes - now suffice for the production of novel or biosimilar recombinant proteins. Such a shift in the industry enables the development of more mobile, modular facility designs. We will describe the rationale for this collaboration and its result: a turn-key solution that integrates a templated process train with a rapidly-deployable facility platform. By combining the unique advantages found with the G-CON POD construction and the bioprocess technology expertise from within Merck KGaA, Darmstadt, Germany, the goal of creating a cost-effective, pre-fabricated alternative to historical 'stick built' facilities is being achieved. Additionally, the flexibility inherent to our approach provides for a greater configurability that confers more user-specified choice into the selection of options. Simple in concept, this solution is also robust, cost-effective, and conducive to tight timelines for implementation.
In this webinar you will learn:
- Basic options for facilities/capacity expansion
- The value of templated process trains employing single-use equipment
- How modular, prefabricated PODs® outfitted with such single-use bioprocessing equipment represent an attractive, cost-effective strategy for capacity expansion
POD® is a registered trademark of G-CON Manufacturing, Inc.
Endotoxin Control and Clearance in BiomanufacturingMilliporeSigma
In this webinar, you will learn:
Sources of endotoxin contamination
Contamination control strategy
Endotoxin removal strategies
Detailed description:
Endotoxin, a lipopolysaccharide (LPS), is a type of pyrogen and is a component of the exterior cell wall of Gram-negative bacteria. To ensure safety on patient’s endotoxin content in the drug should always be controlled. In a biological processing it may emanate from facility, utility, raw materials, process, and personnel. In this webinar we discuss the regulatory norms, strategies for prevention & removal of endotoxin to ensure that the final drug product is safe.
Heating, ventilation, and air conditioning is the technology of indoor and vehicular environmental comfort. Its goal is to provide thermal comfort and acceptable indoor air quality.
Are you looking for an unparalleled solution to reduce in-process volumes within DSP, reach concentrations and yields unachievable with batch TFF, and enable continuous processes? Download the white paper to learn more about SPTFF, a versatile ultrafiltration solution for volume reduction.
Part of the BioContinuum™ Ultrafiltration Platform: www.merckmillipore.com/biocontinuum
Contamination Control in Cleanrooms_Dr.A. AmsavelDr. Amsavel A
Basic’s of Contamination
Sources of Contamination
Environment Specification
Elements of Cleanroom Design and Qualification
Definitions
Control of Contaminations
People, Cleaning, Environment & Material
Operation, Monitoring and Control
Documents and Records
Normal Flow Filtration: Design and Scale UpMilliporeSigma
This presentation explores bioprocessing filtration best practices, including design and scale up methods. You will learn:
• What is filtration?
• Filter capacity and fouling models
• Filter sizing approaches
• Scale up considerations
To learn more about this topic or collaborate with our technical experts, schedule a remote visit at our M Lab™ Collaboration Centers: www.emdmillipore.com/remotevisit
The difference between sbr, mbr and mbbr-sewage treatment plantsCleantechwater_19
Cleantech is a leading name when it comes to sewage treatment plants in India. We provide advanced and reliable wastewater treatment plants, including MBR, MBBR & SBR plants.
Scalability of a Single-use Bioreactor Platform for Biopharmaceutical Manufac...KBI Biopharma
Increasing adoption of single-use technologies for bioprocessing along with higher titers from cell culture bioreactor processes has allowed clinical and even commercial manufacturing to be successfully performed in 2000 L-scale single-use bioreactors. Several biopharmaceutical manufacturers have successfully adopted single-use bioreactors for production. However, information about process scalability from glass bioreactors to 2000 L single-use bioreactors for different types of CHO cell lines is not widely available. Here we provide an overview of the key
differences between single-use and conventional stainless steel bioreactors, and highlight factors that are employed while scaling-up from small-scale glass bioreactors to 2000 L-scale single-use bioreactors. Several case studies focusing on process performance across scales into single-use bioreactors are provided. This analysis confirms that the 2000 L-scale single-use bioreactorsystem can be robustly employed for biopharmaceutical manufacturing.
Process Intensification for future bioprocessingMilliporeSigma
Watch the interactive recording here: https://bit.ly/2OdLYwX
Process optimization and upstream intensification led to smaller, more efficient biomanufacturing facilities becoming more commonplace, with smaller facilities comprised primarily of single use or hybrid technology capable of producing significant amounts of drug product. Such changes, however, bring new challenges, like managing the supply of huge amounts of cell culture media or buffers within smaller footprints. In this webinar two topics will be addressed that help to intensify upstream and downstream processes and address the challenges of future facilities.
Bulk powders of cell culture media (CCM) or single chemicals often show physical disadvantages. CCM powders with fine particles show high dust formation and poor flowability. In addition, dissolution is time consuming due to floating of light particles on the water surface. For the pursued intensification of upstream processing, media preparation times are becoming a serious bottleneck. This mainly accounts for the much higher media consumption or higher concentrated media formulations for future continuous upstream processes. Granulated material can overcome limitations with CCM powder, while additionally being a viable option to reduce caking of bulk chemicals like buffers.
Buffer production for downstream processing remains a significant portion of the facility footprint, labor needs and equipment cost. As downstream operations are essentially product-mass-based, increased productivity in upstream will lead to a proportional increase in demand for downstream buffers. Merck KGaA Darmstadt, Germanty R&D has their expertise in concentration of buffers to improve and streamline buffer management.
Selection, sizing, and operation of bioprocess filtration trains for optimal ...Merck Life Sciences
To increase filter lifetime and improve the economics of filtering bioprocess streams, a prefilter is often installed upstream of a final sterilizing-grade filter. However, determining the economic optimum prefilter and final filter configuration can be challenging. Numerous prefilter options are available, the prefilter to final filter area ratio must be determined, and operating conditions must be selected that will both satisfy the filtration requirements and provide for an economical process that minimizes the filtration system footprint.
One approach towards achieving an optimal filtration system design is to test the bioprocess fluid with several filter configuration combinations and at a range of operating conditions. However, this can be a daunting task and even impractical given the high cost and limited availability of valuable bioprocess fluids. A better approach is to run a limited filtration trial and use a mathematical model that can accurately predict the behavior of the prefilter and final filter under different conditions.
In this webinar we describe a filtration model and test methodology to rapidly and efficiently design an optimal dual-stage filtration process. The model and methodology were applied to Milligard® PES filters, a new class of autoclavable and gamma sterilizable PES membrane prefilters that are designed to protect microfiltration and nanofiltration final filters in bioprocess streams. We show how a model fit to the data from one set of filtration conditions can be used to predict filtration performance at other prefilter to final filter area ratios and operating conditions, and to determine the economic optimum filtration configuration.
In this webinar, you will learn:
- How filters for microfiltration of biological fluids work.
- The effect of operating conditions on filtration performance.
- How to design an optimal series filtration (prefilter and final filter) process.
Single-Use Tangential Flow Filtration for Closed ProcessingMerck Life Sciences
Watch the presentation of this webinar here: https://bit.ly/3b7vD60
Closed processing involves use of physical barriers to separate processing fluid from the external environment. This approach reduces capital expenditures and clean room classification while accelerating time to market. This webinar will present a TFF process run in a closed mode.
Closed processing with single-use technologies is a critical enabler for efficient and robust manufacturing for novel modalities as well as continuous biomanufacturing processing. It can also reduce the dependence on classified clean rooms for traditional modalities. This approach helps to mitigate the risk of contamination by adventitious agents while enhancing operator safety.
In this presentation, we discuss the implementation of closed processing for downstream applications and present the design and performance testing of a single use manufacturing-scale tangential flow filtration system to be able to operate in both functionally and fully closed mode.
In this webinar, you will learn:
• The context of closed processing
• Differences between closed and functionally closed processing
• The drivers for adoption
• Its practical implementation to a TFF step
Modern BioManufacturing: Single-Use Technologies in Configurable, Prefabricat...Merck Life Sciences
A co-webinar describing a solution to biopharma's challenge of rapidly and rationally expanding capacity by employing single-use technologies, a templated process train, and pre-fabricated mobile/modular cleanrooms.
Biopharmaceutical companies on the verge of investing into manufacturing or facilities expansion face many questions and challenges. Speed, agility, and flexibility are becoming more critical to executing their changing production and distribution strategies. Platform facility designs which integrate the latest process technologies within innovative pre-fabricated cleanrooms are critical for addressing the trending desire to implement 'clonable' modular facilities that can be delivered in a timely fashion across multiple locations. Companies like Merck KGaA, Darmstadt, Germany and G-CON Manufacturing are working together to combine their technologies and develop simple yet robust platform solutions for industry.
As bioprocessing technologies intensify performance, volumetric requirements become less. As such, 2000L single-use bioreactors - or multiple bioreactors of similar or less volumes - now suffice for the production of novel or biosimilar recombinant proteins. Such a shift in the industry enables the development of more mobile, modular facility designs. We will describe the rationale for this collaboration and its result: a turn-key solution that integrates a templated process train with a rapidly-deployable facility platform. By combining the unique advantages found with the G-CON POD construction and the bioprocess technology expertise from within Merck KGaA, Darmstadt, Germany, the goal of creating a cost-effective, pre-fabricated alternative to historical 'stick built' facilities is being achieved. Additionally, the flexibility inherent to our approach provides for a greater configurability that confers more user-specified choice into the selection of options. Simple in concept, this solution is also robust, cost-effective, and conducive to tight timelines for implementation.
In this webinar you will learn:
- Basic options for facilities/capacity expansion
- The value of templated process trains employing single-use equipment
- How modular, prefabricated PODs® outfitted with such single-use bioprocessing equipment represent an attractive, cost-effective strategy for capacity expansion
POD® is a registered trademark of G-CON Manufacturing, Inc.
Endotoxin Control and Clearance in BiomanufacturingMilliporeSigma
In this webinar, you will learn:
Sources of endotoxin contamination
Contamination control strategy
Endotoxin removal strategies
Detailed description:
Endotoxin, a lipopolysaccharide (LPS), is a type of pyrogen and is a component of the exterior cell wall of Gram-negative bacteria. To ensure safety on patient’s endotoxin content in the drug should always be controlled. In a biological processing it may emanate from facility, utility, raw materials, process, and personnel. In this webinar we discuss the regulatory norms, strategies for prevention & removal of endotoxin to ensure that the final drug product is safe.
Heating, ventilation, and air conditioning is the technology of indoor and vehicular environmental comfort. Its goal is to provide thermal comfort and acceptable indoor air quality.
Are you looking for an unparalleled solution to reduce in-process volumes within DSP, reach concentrations and yields unachievable with batch TFF, and enable continuous processes? Download the white paper to learn more about SPTFF, a versatile ultrafiltration solution for volume reduction.
Part of the BioContinuum™ Ultrafiltration Platform: www.merckmillipore.com/biocontinuum
Contamination Control in Cleanrooms_Dr.A. AmsavelDr. Amsavel A
Basic’s of Contamination
Sources of Contamination
Environment Specification
Elements of Cleanroom Design and Qualification
Definitions
Control of Contaminations
People, Cleaning, Environment & Material
Operation, Monitoring and Control
Documents and Records
Normal Flow Filtration: Design and Scale UpMilliporeSigma
This presentation explores bioprocessing filtration best practices, including design and scale up methods. You will learn:
• What is filtration?
• Filter capacity and fouling models
• Filter sizing approaches
• Scale up considerations
To learn more about this topic or collaborate with our technical experts, schedule a remote visit at our M Lab™ Collaboration Centers: www.emdmillipore.com/remotevisit
The difference between sbr, mbr and mbbr-sewage treatment plantsCleantechwater_19
Cleantech is a leading name when it comes to sewage treatment plants in India. We provide advanced and reliable wastewater treatment plants, including MBR, MBBR & SBR plants.
IDEF develops and builds industrial crate washers, Food Processing Machineries & Material Handling systems. IDEF has a large range of crate washing machines capable of washing crates from 100 crates to 5000 crates per hour. IDEF Crate Washers are made of stainless steel and have an open design.
In our product range, you will find many types of crate washing machines, for small or large crates. IDEF also develops tailor-made industrial crate washers that are fully customized to suit your needs. For many companies, the ability to provide a cleaning solution for their specific needs is the main reason for choosing IDEF.
IDEF Crate Washers is an expert in hygiene and operates in different sectors. These advantages ensure that our industrial crate washers are sustainable, environmentally friendly, and cost-saving machines. The smallest model in our industrial crate washer range is 100 crates per hour.
Advantages
• Washing of Crates, Trays, Molds, Utensils, and assorted parts.
• Low maintenance costs
• Hygienic design
• Custom-made solutions
• Easy to use
• High-quality materials and technology
• Low investment with high efficiency
Features
• Different types of filter systems are applicable according to your situation.
• Material handling for turn-key solutions.
• Nozzles are easy to adjust and easy to clean
• Powerful nozzles to remove contaminants
• Small production series: 100 ~ 500 Crates/hour.
• Different washing phases for complete cleaning, according to specific needs of hygiene.
• Effective crate cleaning can remove harmful bacteria and allergens, which can travel on crates.
• There is a water level switch that helps cut back on water waste, preventing the pumps from running dry and burning out the machine.
IDEF, Crate Washer, Double Track, Crate Washer Double Track, Bin Washer, IDEF Washer, Cleaning Systems, Crate Cleaning, Bin Washing, Crate Washing, Industrial Crate Washer, High-Pressure Crate Washer, Tray Washer, Tub Washer, Utensil Washer, Rajahmundry
The IDEF TRAY WASHER is an efficient way to wash Trays. IDEF Tray Washer is suitable to clean hard plastic trays, expanded polystyrene trays, and more. If you need to clean a variety of sizes of crates or trays, this machine will be very suitable for you.
IDEF is the leading manufacturer of tray washers in Rajahmundry, chakradwarabandham, Andhra Pradesh. IDEF has developed a wide range of industrial tray washers. IDEF Tray washer enables customers to handle the whole tray cleaning process efficiently and with a high continuous output of as much as 100 to 2000 trays of washing per hour. Our Plastic tray clean machine has widely have a good satisfactory record with our existing clients for its performance.
IDEF Tray Washer has adjustable guidelines (rails), it can be adjusted according to different sizes of trays, to ensure that the trays will not move during the 360-degree washing. Foreign materials such as dirt, grease, oils, and other contaminants are left on the trays and this should be efficiently cleaned to avoid contamination.
Started to create milestones, we Sawant High Vac Industries Mumbai marked our presence in the year 2010 and operates in the manufacturing/servicing of Vacuum Pumps, Vacuum Pumps Accessories, Liquid Ring Vacuum Pump System, Cavity Pumps Slicer since 2 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Vacuum Pumps, Vacuum Pumps Accessories, Liquid Ring Vacuum Pump System, Cavity Pumps that has made us to deepen our roots in the market. We Sawant High Vac Industries Mumbai breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
We are offer Industrial Bin OR Crate Cleaning Machine with advanced filtration and oil remove coalsing system for increasing component efficiency, work performance and working life which reduces cost.
Pressure Jet Systems Pvt. Ltd., a leading manufacturer of high pressure reciprocating triplex plunger pumps and complete systems, used for High Pressure Cleaning, Hydro Jetting, Hydro Blasting, Hydro static Pressure Test, Sewer Jetting, Fire Fighting, Misting-Fogging, Paint & Rust removal and many other industrial applications.
We manufacture pumps having pressure up to 1400 bar, flow rate up to 445 lpm and power up to 180 hp, supplying to corporate giants such as NTPC, BHEL, Reliance and many other.
SAIZONER Mixer Granulator is designed to meet special needs of tablet manufacturing technology. Tapasya Engineering offers rapid mixer, oscillating & high shear mixer granulator, planetary and plough shear mixer.
Visit : http://www.tapasyaindia.net
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
3. CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | SALES@CSIDESIGNS.COM | 417.831.1411
IMPORTANCE OF ROTARY IMPINGEMENT TANK CLEANING
Alfa Laval rotary tank cleaning machines project cleaning fluid, such as water, in an
engineered stream pattern that strikes the tank surface with precise pressure and angles to
provide the most efficient and effective cleaning.
Unlike a static spray ball, which creates a weak and inexact spray, due to the large number
of holes needed to clean the tank, a rotary spray head from Alfa Laval has only 2 or 3
nozzles, which ensures the highest impact and reach when cleaning a surface.
Since Alfa Laval tank cleaners are calibrated to deliver a specific cleaning force to the
tank surface, understanding your operating conditions is necessary to deliver the required
cleaning performance for your application. It is, therefore, very important to know at what
pressure and flow rate you plan to operate.
SPRAY VS. JET CLEANERS
The choice between a Rotary Spray Cleaner and a Rotary Jet Cleaner will depend on your
application requirements. Jet Cleaners provide much higher impingement — impact or
mechanical force — than Spray Cleaners and are designed to offer the optimal output of
force with the least flow and pressure to create the most effective and efficient cleaning.
Rotary Spray Cleaner Rotary Jet Cleaner
4. Rotary spray cleaners from Alfa Laval deliver tank coverage, using a revolving flat fan spray delivering
moderate-level impact in a repeatable pattern. Specifically designed for a variety of applications,
these devices are available in various sizes and different configurations covering most tank sizes.
Cleaning Method
• Revolving flat fan spray effect
• Repeated moderate impact
• Penetrates films
• Dislodges soils
Water Consumption
• 12-73 GPM
• Medium (70%)
ROTARY SPRAY CLEANERS
Mechanical Force
• Medium
Pressure
• 15 to 40 PSI
ROTARY JET CLEANERS
Rotary jet heads from Alfa Laval enable manufacturing and process companies to achieve the most
effective tank clean while using the least amount of resources. An automated, fluid-driven device
optimizes the pressure and flow to create high impact cleaning jets. These devices maximize
mechanical force, which saves on cleaning solution and time needed to effectively clean your tanks.
Cleaning Method
• Impact and resulting force blast
contaminants from surface
• Rotates in a repeatable,
reliable 360° pattern for
whole-tank coverage.
Water Consumption
• 3-160 GPM
• Water and wash fluid savings
estimated between 50-90%
Mechanical Force
• High
Pressure
• 30-800 PSI
5
5. CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | SALES@CSIDESIGNS.COM | 417.831.1411
ROTARY SPRAY CLEANERS FROM ALFA LAVAL
SaniMicro SaniMidget SaniMagnum
Tank Size
Small ranging from
0.05m3 to 1m3
Small ranging from
0.1m3 to 10 m3
Mid-sized ranging from
5m3 to 50m3
Recommended
Pressure
30PSI 30PSI 30PSI
Working
Temperature (max)
203°F 203°F 203°F
Ambient
Temperature (max)
284°F 284°F 284°F
Spray Pattern
360°
180° Down
270° Up
360°
180° Down
270° Up
360°
180° Down
270° Up
3-A Standard No No No
TofteJorg Sani Series
Cleans with a rotating
fan generating impact
and coverage. This
results in lower liquid
consumption and
shorter runtime.
6. TofteJorg SaniMidget Retractor
The distribution pattern of
the cleaner head generates
a vibrating impact as well as
cascading flow coverage of all
internal surfaces of the tank.
TofteJorg Sani SB 3-A Series
The 3-A compliant spray
heads clean with a rotating fan
generating impact and coverage.
This results in lower liquid
consumption and shorter runtime.
SaniMidget
Retractor
SaniMidget SB SaniMagnum SB SaniMega SB
Larger ducts,
channels, chambers,
vent lines, etc.
Small ranging from
0.1m3 to 10 m3
Mid-sized ranging from
5m3 to 50m3
Large ranging from
50m3 to 350 m3
43PSI 30PSI 30PSI 30-45PSI
203°F 203°F 203°F 203°F
302°F 302°F 302°F 302°F
270° Up
360°
270° Up
360°
270° Up
360°
270° Up
No Yes Yes Yes
7
7. CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | SALES@CSIDESIGNS.COM | 417.831.1411
ROTARY JET CLEANERS FROM ALFA LAVAL
GJ 4 GJ 5 GJ 7 GJ 8
Tank Size
Large with over
15ft diameter
Small to mid-sized
Ideal for barrels,
drums, and
small vessels
Large
Throw Length
(max)
100FT 4-24FT 8FT 85FT
Cycle Time 10-25Min 8-11Min 2-5Min 8-12Min
Working Pressure 40-300PSI 40-1,000PSI 44-1,200PSI 40-400+PSI
Recommended
Pressure
50-200PSI 50-600PSI 80-797PSI 50-300PSI
Working
Temperature (max)
203°F 203°F 203°F 203°F
Ambient
Temperature (max)
284°F 284°F 284°F 284°F
Standards
2.1 material certificate
upon request
2.1 material certificate
upon request
2.1 material certificate
upon request
2.1 & 3.1 material
certificate upon
request
Designed to
remove the
toughest residues
and is highly
customizable.
Compact size allows it
to readily pass through
a three-inch opening,
making it ideal for
cleaning small tanks,
vats, and vessels.
Easily fits through
a 1 ½ inch access
hole and capable of
operating at both high
and low pressures.
Provides the same
high impact clean as
traditional, larger tank
cleaners but is lighter,
shorter, and narrower.
8. GJ 9 GJ A6 GJ A8 GJ BB
Small and mid-sized Mid-sized Mid to large-sized Small
30FT 19FT 45-85FT 8FT
4-12Min 10-14Min 8-12Min 1-2Min
44-1,000PSI 30-400+PSI 40-400+PSI 80-1,200PSI
58-580PSI 30-150PSI 50-300PSI 80-795PSI
203°F 203°F 203°F 203°F
284°F 284°F 284°F 284°F
2.1 material
certificate upon request
2.1 & 3.1 material
certificate upon request
2.1 material
certificate upon request
2.1 material
certificate upon request
Designed for permanent
installation and to
provide true germ and
bacteria-free cleaning.
Engineered to minimize
physical effort and
maximize efficiency.
Remains outside
the barrel during
cleaning, to provide
exceptional durability.
Offers compact cleaning
for small tanks, totes,
and intermediate bulk
containers (IBCs).
9
9. CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | SALES@CSIDESIGNS.COM | 417.831.1411
ROTARY JET CLEANERS FROM ALFA LAVAL
TJ SaniJet 25 TJ 20G TZ-67 TJ40G
Tank Size Mid-sized Mid-sized
Large ranging from
50m3 to 500m3
Large ranging from
50m3 to 500m3
Throw Length (max) 56FT 46FT 56FT 70FT
Cycle Time 2-8Min 6-10Min 11-19Min 2-16Min
Working Pressure 44-116PSI 44-116PSI 44-174PSI 44-174PSI
Recommended
Pressure
73-94PSI 73-94PSI 73-94PSI 73-102PSI
Working
Temperature (max)
203°F 203°F 203°F 203°F
Ambient
Temperature (max)
284°F 284°F 284°F 284°F
Standards
2.2 material upon
request, FAT & SAT,
ATEX and EHEDG
USDA, USFDA, 3.1
material upon
request, and ATEX
2.1 material
certificate upon
request and ATEX
3.1 material
certificate upon
request and ATEX
Provides 3D
indexed impact
cleaning over a
defined time period.
Well-suited to
portable applications
where high impact
is required.
Provides automated
3D-indexed impact
cleaning over a
defined time period for
large tanks & vessels.
The jet pressure
efficiently removes
residue to provide
the hygienic
conditions required
for batch production.
10. GJ PF GJ 10 GJ A2 SaniJet 20
Large Large Mid-sized Mid-sized
65FT 35FT 14FT 13FT
8-20Min 10-28Min 4-20Min 5-10Min
40-400PSI 40-300PSI 40-200PSI 44-188PSI
50-300PSI 50-270PSI 50-150PSI 73-116PSI
195°F 203°F 203°F 194°F
284°F 284°F 284°F 284°F
2.1 material
certificate upon request
2.1 material
certificate upon request
2.1 & 3.1 material
certificate upon request
2.2 & 3.1 material
certificate upon request,
FAT & SAT and ATEX
Created as a solution
for pharmaceutical
cleaning needs, but
works cohesively in any
sanitary environment.
For processing highly
viscous, foaming, or
thixotropic products and
chemical applications where
product cross-contamination
is unacceptable.
Designed to fit through
standard underground
storage tank (UST) inlets.
Specifically engineered
to offer the most efficient
and effective cleaning for
vessels with capacities of
5,000 to 25,000 gallons.
11
11. CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | SALES@CSIDESIGNS.COM | 417.831.1411
Central States Industrial Equipment (CSI) is a leader in detail design and
execution for hygienic process systems in the food, dairy, beverage,
pharmaceutical, biotechnology, and personal care industries. Specializing
in process piping, system start-ups, equipment testing, and cleaning
systems, CSI leverages technology, intellectual property, and industry
expertise to deliver solutions to processing problems.
CSI also distributes a wide range of sanitary processing equipment along
with installation materials including fittings, pumps, valves, tubing, and
instrumentation.
We also stock complete lines of corrosion-resistant Super Alloys AL-6XN®
and Hastelloy® C-22.
Customers ranging from processors, OEM’s mechanical and electrical
contractors to engineering firms and resellers in the processing industry
turn to Central States Industrial Equipment for its breadth of experience,
depth of expertise, and innovation.
How to Choose the Right Tank Cleaning Device REV 06/19
CENTRAL STATES INDUSTRIAL
SPRINGFIELD, MO
GRAND PRAIRIE, TX | DURHAM, NC
FRESNO, CA | KNOXVILLE, TN
CSIDESIGNS.COM
SALES@CSIDESIGNS.COM
800.654.5635 | 417.831.1411
