The document presents a senior design project to convert a prototype dynamometer design into a marketable product. A dynamometer measures engine power. The team aims to make the design affordable enough for more auto shops to purchase. They discuss market research of existing brands, forecasting demand, a conceptual design, and plans for production, personnel needs, and ensuring quality. The objective is to take the single prototype and turn it into a large-scale manufacturable product and business strategy.
Life Insurance industry has been witnessing low persistency (a policy's ability to be active and sustained premium payment)rate hence the proactive need for customer retention and maximizing renewal premium collection and need for monitoring the performance of intermediaries and agents could gain immense value from deriving highly usable recommendations.
The need for such inferences, importantly in a timely basis can't be more important than now as the rightful and the revised guidelines by the regulator ensures the need to minimize wrong selling, increased persistency and performance of all the stakeholders in Life Insurance to make business a flourishing one.
How did the evolving need of the industry coupled with constant change in market and competitive landscape was married and focused approaches were espoused through with tangible benefits on Customer Value Retention and Maximization & agent's performance improvement were met.
What are the recommendations from Sameer to individuals & enterprises who intend to devise their Analytical Vision for their respective organization, what are the areas to be considered before embarking such a journey
.
Life Insurance industry has been witnessing low persistency (a policy's ability to be active and sustained premium payment)rate hence the proactive need for customer retention and maximizing renewal premium collection and need for monitoring the performance of intermediaries and agents could gain immense value from deriving highly usable recommendations.
The need for such inferences, importantly in a timely basis can't be more important than now as the rightful and the revised guidelines by the regulator ensures the need to minimize wrong selling, increased persistency and performance of all the stakeholders in Life Insurance to make business a flourishing one.
How did the evolving need of the industry coupled with constant change in market and competitive landscape was married and focused approaches were espoused through with tangible benefits on Customer Value Retention and Maximization & agent's performance improvement were met.
What are the recommendations from Sameer to individuals & enterprises who intend to devise their Analytical Vision for their respective organization, what are the areas to be considered before embarking such a journey
.
Business in Indonesia may have emerged from the global financial crisis more or less unscathed, but companies in the country cannot escape the higher expectations of corporate accountability that have come in its wake. Indeed according to the results of the 2010 Edelman Trust Barometer, informed publics in Indonesia have higher expectations of corporate accountability than any other country in Asia Pacific.
The results of this year’s study indicate that business in Indonesia cannot afford to relax, despite the strong performance of the local economy,” said Chadd McLisky, chairman of IndoPacific Edelman. “Trust has evolved from being a welcome side effect of corporate activity to a distinct line of business that companies must monitor closely and manage effectively in order to maintain a license to operate.”
Visit http://www.indopacedelman.com/ for more info.
Business in Indonesia may have emerged from the global financial crisis more or less unscathed, but companies in the country cannot escape the higher expectations of corporate accountability that have come in its wake. Indeed according to the results of the 2010 Edelman Trust Barometer, informed publics in Indonesia have higher expectations of corporate accountability than any other country in Asia Pacific.
The results of this year’s study indicate that business in Indonesia cannot afford to relax, despite the strong performance of the local economy,” said Chadd McLisky, chairman of IndoPacific Edelman. “Trust has evolved from being a welcome side effect of corporate activity to a distinct line of business that companies must monitor closely and manage effectively in order to maintain a license to operate.”
Visit http://www.indopacedelman.com/ for more info.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
1. Presented By: Erica Miller, Eray Ozturk, Paul Jansen, and Jared Schneider
SENIOR DESIGN 2012
2. What is a dynamometer?
Problem statement
Cost prevents many shops
from investing in the tool
ME conceptual design
Objective:
To convert a single prototype
design to a marketable
product and production
strategy suitable for large scale
manufacturing
2 8/22/2012 SCHOOL OF ENGINEERING
3. Team Leader:
Erica Miller
Enterprise:
Design: Production:
Eray Ozturk*
Paul Jansen* Jared Schneider*
Serra Akyol
Furkan Enderer Burcu Demir
Emre Ulugol
Ryan Alberter Miray Kaya
Selin Kanli
3 8/22/2012 SCHOOL OF ENGINEERING
4. Market Research
Forecasting
Production Redesign
Personnel Requirements
Facility Design
Quality
Cost Analysis
Conclusions
4 8/22/2012 SCHOOL OF ENGINEERING
5. Market Research
Existing Brands
▪ DynoJet
▪ Mustang
▪ Land and Sea
Market Forecast
Market Share
Forecasting the Demand
5 8/22/2012 SCHOOL OF ENGINEERING
6. Customer: Motorcycle Mechanics
Surveys
Influencing factors on number of mechanics
▪ Number of repair facilities
▪ Number of bike shops
▪ World Price of Crude Oil
▪ Per Capita Disposable Income
6 8/22/2012 SCHOOL OF ENGINEERING
7. Heuristic Approach – Non-Linear
Correlation analysis of influencing factors using
Pearson Product Method
Determination of weights by minimizing error
Used forecast values by professionals
Facilities which Employee Motorcycle Mechanics:
Potential Dynomometer Customers
8000
Number of Potential Dynomometer
7534 7700
7500 7061 7176 7373
7000 7158
Customers
6500 Actual Demand
6000 Forecasted Demand
5500 Connection
5000
2000 2005 2010 2015 2020
Year
7 8/22/2012 Source: IBIS World Industry Report SCHOOL OF ENGINEERING
8. Market Share Indices for initial demand
Purchase
75%
Available
100%
Price OK Not Purchase
90% 25%
Attractive Not Available
55% 0%
Marketing
Sales and
Aware High Price
30% 10%
Not Attractive
45%
Not Aware
70%
Would You Purchase a Dynamometer?
Yes
13%
Possibly
No 27%
60%
8 8/22/2012 SCHOOL OF ENGINEERING
9. Preliminary Data Source Pessimistic Neutral Optimistic
Definitely will buy Customer Survey 13% 13% 13%
Probably will buy Customer Survey 13% 27% 27%
Likely buyers
Buyers form definites = Definitely buy * 80.00% 10.67% 10.67% 10.67%
Buyers form probables = Probably buy * 30.00% 4.00% 8.00% 8.00%
Trial Rate Total of likely Buyers 14.67% 18.67% 18.67%
Marketing Adjustments
Market Share Index Estimated from
Marketing Plan 7.50% 11.14% 13.16%
(MSI)
Adjusted Trial Rate = Trial Rate*MSI 1.10% 2.08% 2.46%
2012 Target Population Marketing Plan Data 7158 7158 7158
=Target Pop*Adjusted Trial
Trial Population Rate
79 149 176
9 8/22/2012 SCHOOL OF ENGINEERING
10. Normal distribution and influencing factors
Start-up / S-Curve
Adjusted yearly
Production Level
450
400 390
350
286 330
Number of Dynos
300
250 210
242
200 176 180
150
177 175
149 153 128
100 94
79 81
50
0
2011 2012 2013 2014 2015 2016 2017
Optimistic Neutral Pessimistic
10 8/22/2012 SCHOOL OF ENGINEERING
11. Inertia Dynamometer
4 Major Components
Drum Assembly
Frame Assembly
Front Wheel Plate
Loading Ramp
209 individual
parts, 1532 pounds
11 8/22/2012 SCHOOL OF ENGINEERING
12. Reduce cost
Maintain mass moment of inertia
Lead vs Water
A500 structural casing
AISI 4340 mount shafts
12 8/22/2012 SCHOOL OF ENGINEERING
13. Minimal vibration
Worst case scenario calculation
Steel pipe has bend in center
Offset center of mass creates vibration
Absolute worst case
2500 RPM Drum Speed
1,759 lbf due to normal acceleration
≈ 1,400 lbf dynamic load on each bearing
13 8/22/2012 SCHOOL OF ENGINEERING
14. Tire Speed (MPH) vs Drum RPM
Size Tire Speed Rating MPH Limit Tire OD (inch) Tire RPM at Limit
Motorcycle tire 500S16 S 112 26.4 1426
MT90H16 H 130 25.3 1727
max speed ratings 130/90H16
130/90H16
H
H
130
130
25.4
25.6
1720
1707
Converted to 140/90H16
140/90H16
H
H
130
130
25.6
25.8
1707
1694
drum RPM 160/80H16
160/80H16
H
H
130
130
26.1
26.1
1674
1674
Sized bearing 120/90H16
120/80V16
H
V
130
150
26.3
23.8
1662
2118
140/80VB16 V 150 24.8 2033
above max RPM 130/90V16 V 150 25 2017
150/80V16 V 150 25.4 1985
Life ≈100,000 hrs 130/70VB18 V 150 25.4 1985
140/70V18 V 150 25.7 1962
200/60VB16 V 150 25.9 1947
120/80V18 V 150 25.9 1947
170/60VB18 V 150 26 1939
150/70VB18 V 150 26.2 1924
130/80V18 V 150 26.3 1917
180/55VB18 V 150 26.3 1917
120/90V18 V 150 26.4 1910
14 8/22/2012 SCHOOL OF ENGINEERING
15. Square steel tubing
1x1x0.065 inch
2x2x0.125 inch
Optimized cutting layouts
1D Cut Optimizer – Nikita Yurchenko
Welded and annealed
15 8/22/2012 SCHOOL OF ENGINEERING
16. Anti-vibration mounts
Mount shaft press fit
Bearing attachment
SAE Grade 5 nuts/bolts
Electronics mount
Sandwiched between anti-vibe
and bottom of bearing
16 8/22/2012 SCHOOL OF ENGINEERING
17. Electronics
Programmable System on Chip (PSoC)
Rotary Encoder
Direct Serial connection to PC (RS232 protocol)
Ramp Assembly
Ease load/unload of motorcycles
Basic construction
D-Link strap points
Secure motorcycle while running test
17 8/22/2012 SCHOOL OF ENGINEERING
18. Material/Component Units/dyno Units
1x1x0.0625 Square Steel Tube* 1680 INCH
MAKE 18x0.375 Steel Pipe* 1 FEET
Lead* 986 LB
1/2" x 72" X 144" HR Plate - ASTM A-36 Steel* 324 IN2
2x2x0.25 Square Steel Tube* 140.8 IN
Floor Plate - 1/8" x 48"X144“* 6384 IN2
2x2x0.125 Steel Angle Iron* 4 FT
AISI 4340 Steel - HR Q & T Rounds* 9.64 IN
Black HDPE Sheet* 1.67 SHEETS
Material/Component Units/dyno Units
7/16"-20 x 7/8" Black Oxide Alloy Steel Socket Cap Screw 12 PARTS
5/8"-11 x 5" Plain Finish SAE J429 Grade 8 Hex Cap Screw 4 PARTS
5/8"-11 Yellow Zinc Finish Grade 8 Finished Hex Nut 4 PARTS
Blind Rivets 1/8" Dia.—For Hole Size: 0.129"-0.133" 100 PARTS
US Digital E2 Rotary Encoder 1 PART
PSoC 1 PART
BUY
Vibration Isolation 4 PARTS
Hammerite 43180 Red Hammered Metal Finish Size Quart 1 PARTS
1" D-Ring Tie down with mounting bracket 6 PARTS
1/2"x1" Plain Finish Clevis Pin 4 PARTS
Zinc Hitch Pin Clip (for 1/2"-5/8" Shaft) 4 PARTS
Antivibration Foot Mounts (Part No. - V41C01M10012X075) 10 PARTS
Timken Type E Tapered Roller Bearing E-P2B-TRB-65MM 2 PARTS
18 8/22/2012 SCHOOL OF ENGINEERING
19. Drilling Chop Saw 1x1 Square Steel Tube
Frame Assembly
(Welding)
Chop Saw 1x1 Square Steel Tube
Chop Saw 2x2 Square Steel Tube
AISI 4340 Steel HR
Drilling Machining Bandsaw Q&T Rounds
1/2" x 72" HR Plate -
Tapping Drilling Plasma Cut ASTM A-36 Steel
Drum Assembly
(Welding)
Plasma Cut 18 x 0.375 Steel Pipe
Final Assembly
Casting Melting Lead
Chop Saw 1x1 Square Steel
Ramp Assembly
(Welding) Floor Plate - 1/8" x
Plasma Cut 48"X144"
Front Wheel Lock 2x2x0.125 Steel Angle
Assembly
Drilling Chop Saw Iron
Floor Plate - 1/8" x
Front Wheel Plate Plasma Cut 48"X144"
Assembly
(Welding) Chop Saw 1x1 Square Steel Tube
Side Walls Table Saw Black HDPE Sheet
Floor Plate - 1/8" x
Deck Surface Plasma Cut 48"X144"
19 8/22/2012 SCHOOL OF ENGINEERING
20. Basic metal fabrication
Chop saw
Plasma cutter
Welder
Annealing torch
Drill press
NC machining
High precision needed for drum mount shaft
▪ Press fit into bearings
Machine size calculations
20 8/22/2012 SCHOOL OF ENGINEERING
21. Office Workers
• Manufacturing Engineer
• Secretary
• Sales Representative
• Contract Programmer
Laborers
Material Handlers
Skilled Workers
21 8/22/2012 SCHOOL OF ENGINEERING
22. 24.7 labor hours required per dyno
One 8 hour shift – 250 days/year
Optimal worker quantities for production
rate, wages, and hiring/firing costs
Number of Laborers
10
8
6
4 Material Handlers
2 Skilled Workers
0
22 8/22/2012 SCHOOL OF ENGINEERING
23.
EOQ for Dyno Inventory
35
31
30
26
25 22
21 21
20
15
10
5
0
2012 2013 2014 2015 2016
23 8/22/2012 SCHOOL OF ENGINEERING
24. Material Handling Decisions
Cherry Picker vs. Gantry Crane
Roller Dolly
Pallet Truck
Racking
Three Main Types of Material
o Steel Pipe (Drum)
o Square Tubing
o Sheet Metal
24 8/22/2012 SCHOOL OF ENGINEERING
26. II. Weighted From-To Matrix
III. Relationship Diagram
IV. Activity Relationship Diagram
Symbol Definition Score
A Absolutely Necessary 46 to 60
E Especially Important 31 to 45
I Important 16 to 30
O Ordinary 1 to 15
U Unimportant 0
X Undesirable -
26 8/22/2012 SCHOOL OF ENGINEERING
27. V. Department Sizing
• Machine/Table Space and Workspace
5,100 ft2
27 8/22/2012 SCHOOL OF ENGINEERING
28. Geographic midpoint of customers
6 possible counties in KS, MO, OK
Hybrid approach to account for
Tax rate Unemployment rate
Right to Work Energy Prices
Minimum Wage Land Value
1245 North Santa Fe, Wichita, Kansas
Wichita, KS
28 8/22/2012 SCHOOL OF ENGINEERING
29. Drum and Lead Casting
• Clearance of 0.050 in
Weight of Drum
Straightness of Frame
Straight edge and feeler gauge
Horsepower and Torque Curves
• Use electric motor to run tests
• Calibrate
29 8/22/2012 SCHOOL OF ENGINEERING
30. Packaging Material
• Extended Pallets
• Shrink Wrap
• Plastic Bands
Shipping
Option Carrier Estimated Transit Cost
Longest Distance YRC Freight 4 business days $668
Shortest Distance Lakeville Motor Express 1 business days $177
Source: www.freightquote.com
30 8/22/2012 SCHOOL OF ENGINEERING
31. Start-Up Cost (Equipment)
Machinery $ 56,685.47 Malstrom’s Estimates
Supplemental Items
Material Handling
$
$
24,569.00
4,239.90 Selling Price
Warehousing $ 1,763.64
Total Start-Up Cost $ 87,258.01 Survey & Competitors
Fixed Cost ▪ $6,500
Building Rent $ 22,488.00
Management Salaries $ 171,150.00 ▪ 41% Markup
Total Fixed Cost $ 193,638.00
▪ $5,000 less expensive
Variable Cost
Materials $3,279.00 than closest competitor
Mechanical Labor $395.00
Material Handling Labor $110.00
Packaging $99.00
Shipping $375.00
Total Variable Cost/Dyno $4,258.00
31 8/22/2012 SCHOOL OF ENGINEERING
32. Demand taken constant after 2016
Optimistic: 482 Units – July 2014
Neutral: 655 Units– August 2015
Pessimistic: In year 2030
Break-Even Analysis for Neutral Scenario
$12,000,000.00
$10,000,000.00
$8,000,000.00 Cost
Dollars
$6,000,000.00 Income
$4,000,000.00
655
$2,000,000.00
$-
0 200 400 600 800 1000 1200 1400 1600
Quantity
32 8/22/2012 SCHOOL OF ENGINEERING
34. Decision Analysis
Net Present Values over next 6 years
Optimistic Neutral Pessimistic
$1,345,600 $875,600 -$346,500
EMV = $687,600
CougarDyno has potential to succeed
Establish new market share
Production redesign
Efficient facility
34 8/22/2012 SCHOOL OF ENGINEERING
35. Questions?
35 8/22/2012 SCHOOL OF ENGINEERING
37. What could be the most
Would you be willing Is portability
Why would like to important attributes for Why have not you How much would you like to
Store Location to invest in a Do you need a dyno? important feature for Other features to include
get one? a dynamometer bought one before? pay for the dynamometer?
dynomometer you?
needed?
Action cooling something expensive, not not sure, cheaper than whats
817 West Union Avenue, Litchfield, IL Possibly yes maybe yes, have a small shop cooling feature
Powersports rather? enough room on market
Chesterfield
expensive, not a
Valley Power 17501 N Outer 40, Chesterfield, MO possibly yes tuning good software,
demand
6-7 k yes atv/motorcycle
Sports
doesn't matter what
Southern Illinois type - inertia etc, ease
not really, wants to warranty, updates,
Choppers & Power 304 North Van Buren Street, New Athens, IL yes yes tuning of use, software can be price less than 10,000
just put it in his shop memberships
complicated, does it
Sports
come with software
oh yeah, definitely,
they would have to have g sensor can mount on
Lincoln Power fuel to air ratio,
100 Raceway Park Drive, Moscow Mills, MO yes sure
bragging rights
accuracy, cost not sure, build a room to house there, can hook up things to the
Sports it and an exhaust bike now
system
PMC Super Tuners portability would help,
174 Kings Drive, Florissant, MO no
especially racing
n/a n/a n/a n/a n/a n/a
Inc.
Knebel's
mainly do
Autobody Center 2702 Illinois 160, Highland, IL possibly if it was cheap enough n/a Portability not an issue
automotive repairs
doesn't know no n/a
& Towing
if it was not
Ritter Cycle Racing 11202 Ellis Road, St. Jacob, IL possibly possibly n/a portability not an issue electric and a n/a n/a n/a
water brake dyno
Donelson Cycles not into
9851 Saint Charles Rock Road, St Ann, MO no no n/a portability not an issue n/a n/a n/a
Inc performance
Royalty Racing 920 Dock Street, Saint Louis, MO no no n/a portability not an issue n/a n/a n/a
the demand is
Black Diamond Williamson County Pkwy, Marion, Illinois 62959 no no n/a portability not an issue declining, people n/a n/a n/a
are afraid
They don't have,
Bier Brothers 1921 East Terra Lane O'Fallon, MO 63366 no no n/a portability not an issue it's too expensive, n/a n/a n/a
they don't need
JMP Cycle 1490 E Edwardsville Rd, Wood River, IL no no n/a portability not an issue n/a n/a n/a n/a
AMT Fergonson 715 South Florissant Road, Ferguson, MO 63135-2949 no no n/a portability not an issue n/a n/a n/a n/a
Matt Johnson St.
3326 Woodson Road, Saint Louis, MO no no n/a portability not an issue n/a n/a n/a n/a
Johns
West County
956 S Highway Dr, Fenton, MO no no n/a portability not an issue n/a n/a n/a n/a
Power Sports
37 8/22/2012 SCHOOL OF ENGINEERING
38. Preliminary Data Source Pessimistic Neutral Optimistic
Definitely will buy Customer Survey 13% 13% 13%
Probably will buy Customer Survey 13% 27% 27%
Likely buyers
Buyers form definites = Definitely buy * 80.00% 10.67% 10.67% 10.67%
Buyers form probables = Probably buy * 30.00% 4.00% 8.00% 8.00%
Trial Rate Total of likely Buyers 14.67% 18.67% 18.67%
Marketing Adjustments
Market Share Index Estimated from
Marketing Plan 7.50% 11.14% 13.16%
(MSI)
Adjusted Trial Rate = Trial Rate*MSI 1.10% 2.08% 2.46%
2012 Target Population Marketing Plan Data 7158 7158 7158
Trial Population =Target Pop*Adjusted Trial 79 149 176
Rate
38 8/22/2012 SCHOOL OF ENGINEERING
39. Scenario Pessimistic Neutral Optimistic
Productio Productio Productio
Cum Market Cum Market Cum Market
Year n n n
Penetration Penetration Penetration
Level Level Level
2012 1.10% 79 2.08% 149 2.46% 176
2013 2.23% 81 4.19% 152 4.96% 180
2014 3.44% 94 6.49% 177 7.67% 210
2015 5.07% 128 9.56% 242 11.30% 286
2016 7.24% 175 13.64% 330 16.12% 390
39 8/22/2012 SCHOOL OF ENGINEERING
40. Units for Regular Workforce Units with OT
Worker Starting Ending Starting Ending
s Quantity Quantity Quantity Quantity
1 1 64 65 66
2 67 129 130 130
3 131 194 195 195
4 196 259 260 260
5 261 323 324 325
6 326 388 389 390
7 391 453 454 454
40 8/22/2012 SCHOOL OF ENGINEERING
Editor's Notes
The following report summarizes the collaborative effort put forth by the Spring 2012 Industrial and Manufacturing Engineering Senior Design Team to create a strategy for the design of a motorcycle dynamometer manufacturing enterprise entitled Cougar Dyno. By implementing tools and strategies learned throughout upper division IME the team was able to effectively convert a single prototype design to a marketable product and resulting production strategy, facility design, and costing required for large scale manufacturing. Talk about responsibilities of each group
MEAN 4 & ST 18 YEAR TO MATURE MARKET FORESEEN !