We are the best provider of customized FCT Test Fixtures, fixture design and build and the test probe for the effective solution of the demand. Visit http://equip-test.com
Vijay Persaud has over 20 years of experience in electronic system testing and engineering. He has worked as an engineering technician for Harris Corporation testing F-35 communication systems and other wireless products. Prior to that, he worked as an engineering technician for DRS Tactical Systems building prototypes, testing systems, and providing field support. He has a background in cellular technologies and experience testing systems for vibration and temperature.
This resume summarizes Sumit Suresh Kulkarni's experience as an electronic engineer and senior test engineer specializing in testing life safety products. He has over 5 years of experience in roles at Honeywell Technology Solutions and other companies developing skills in software testing, test automation, defect tracking, and testing industrial automation tools and protocols. He holds an ISTQB certification and Six Sigma Green Belt and has led testing on projects involving fire and gas detection controllers.
Carl Joseph Cygan has over 15 years of experience in electrical engineering and systems engineering. He has worked on developing radio communications equipment for public safety and defense industries. Some of his responsibilities have included circuit simulation and design, automating testing equipment using LabView, evaluating medical device batteries and thermal performance, and collaborating on engineering requirements in DOORS. He is skilled in RF circuitry, modeling, debugging, manufacturing, and documentation.
Electrical Engineer with experience in mobile radio product development serving the Public Safety and defense industries. Adept at circuit simulations, design and optimization of various subsystems used in communications equipment. Proven medical devices verification and validation test plan experience.
This document contains contact information and a resume for Mark Geiger, a senior electronics failure analysis technician. Geiger has over 16 years of experience performing failure analysis on custom power supplies, inverters, and frequency changers at the component level. He is proficient in using various test equipment and programming microcontrollers, and has education and certifications in electronics technology. Geiger also has experience implementing Lean manufacturing practices and supervising other technicians.
Glenn McGee has over 30 years of experience as an RF and electronic technician, currently working at Lockheed Martin Commercial Space Systems testing and tuning microwave modules and flight hardware from 2-60 GHz for commercial and government satellites. He has experience setting up test benches and performing environmental testing. McGee also has a background in testing microwave amplifiers, mixers, oscillators and switches at GE Aerospace and building electronic circuit boards for NASA at RCA Astro Space. He has an Associate's Degree in Electronic Technology and maintains several certifications.
This resume is for Robert Vavra, an electrical engineering technician with over 4 years of experience in technical and product delivery roles. He has expertise in embedded microprocessors, control systems, product testing and evaluation, and regulatory compatibility testing. His education includes a Bachelor's degree in Electrical Engineering Technologies from SUNY Institute of Technology and Associate's degrees from Onondaga Community College. Currently he works as a Test Engineer at Kelly Engineering/Welch Allyn performing hardware and electrical testing for medical devices and has held previous roles in machine operation, return material analysis, and as a technician.
This document provides a summary of a professional technician with over 30 years of experience in the electronic industry, including extensive experience testing and repairing circuit boards, working closely with engineering teams, and training other technicians. They have a history of self-motivated work as a team player with strong mechanical and problem-solving skills.
Vijay Persaud has over 20 years of experience in electronic system testing and engineering. He has worked as an engineering technician for Harris Corporation testing F-35 communication systems and other wireless products. Prior to that, he worked as an engineering technician for DRS Tactical Systems building prototypes, testing systems, and providing field support. He has a background in cellular technologies and experience testing systems for vibration and temperature.
This resume summarizes Sumit Suresh Kulkarni's experience as an electronic engineer and senior test engineer specializing in testing life safety products. He has over 5 years of experience in roles at Honeywell Technology Solutions and other companies developing skills in software testing, test automation, defect tracking, and testing industrial automation tools and protocols. He holds an ISTQB certification and Six Sigma Green Belt and has led testing on projects involving fire and gas detection controllers.
Carl Joseph Cygan has over 15 years of experience in electrical engineering and systems engineering. He has worked on developing radio communications equipment for public safety and defense industries. Some of his responsibilities have included circuit simulation and design, automating testing equipment using LabView, evaluating medical device batteries and thermal performance, and collaborating on engineering requirements in DOORS. He is skilled in RF circuitry, modeling, debugging, manufacturing, and documentation.
Electrical Engineer with experience in mobile radio product development serving the Public Safety and defense industries. Adept at circuit simulations, design and optimization of various subsystems used in communications equipment. Proven medical devices verification and validation test plan experience.
This document contains contact information and a resume for Mark Geiger, a senior electronics failure analysis technician. Geiger has over 16 years of experience performing failure analysis on custom power supplies, inverters, and frequency changers at the component level. He is proficient in using various test equipment and programming microcontrollers, and has education and certifications in electronics technology. Geiger also has experience implementing Lean manufacturing practices and supervising other technicians.
Glenn McGee has over 30 years of experience as an RF and electronic technician, currently working at Lockheed Martin Commercial Space Systems testing and tuning microwave modules and flight hardware from 2-60 GHz for commercial and government satellites. He has experience setting up test benches and performing environmental testing. McGee also has a background in testing microwave amplifiers, mixers, oscillators and switches at GE Aerospace and building electronic circuit boards for NASA at RCA Astro Space. He has an Associate's Degree in Electronic Technology and maintains several certifications.
This resume is for Robert Vavra, an electrical engineering technician with over 4 years of experience in technical and product delivery roles. He has expertise in embedded microprocessors, control systems, product testing and evaluation, and regulatory compatibility testing. His education includes a Bachelor's degree in Electrical Engineering Technologies from SUNY Institute of Technology and Associate's degrees from Onondaga Community College. Currently he works as a Test Engineer at Kelly Engineering/Welch Allyn performing hardware and electrical testing for medical devices and has held previous roles in machine operation, return material analysis, and as a technician.
This document provides a summary of a professional technician with over 30 years of experience in the electronic industry, including extensive experience testing and repairing circuit boards, working closely with engineering teams, and training other technicians. They have a history of self-motivated work as a team player with strong mechanical and problem-solving skills.
Robert Parcon is seeking a job in electrical engineering technology that utilizes his education and experience. He has over 9 years of experience in production, manufacturing, and calibration roles. He is skilled in testing circuitry, reading schematics, and troubleshooting electrical equipment. His experience includes roles at WMATA, Transcat, Alstom Signaling, MKS Instruments, and other companies. He has a strong technical background and multiple professional references.
INSPECTION AND TEST PROCEDURES FOR SWITCHGEAR AND SWITCHBOARDhussein ibrahim
The document outlines inspection and test procedures for switchgear and switchboard assemblies. It details various visual and mechanical inspections such as checking equipment nameplates, physical condition, anchorage and clearances. It also specifies electrical tests including insulation resistance tests, dielectric withstand tests and current injection tests. Test values are provided for comparing insulation resistance values, bolt torque levels and more. The purpose is to verify equipment is in good working order and installed according to design specifications and manufacturer recommendations.
FAST is a test system developed by Benetel that automates wireless product compliance testing to save time and costs. It tests 3G devices against 3GPP specifications for transmitter and receiver characteristics. The FAST system controls test instruments using customized software and a test set with integrated filters. It provides automated testing over various parameters, stores results in a database, and generates test reports. Key benefits include reduced verification times, improved quality through extensive testing, and freeing up engineers for more productive work.
The document discusses testing functional requirements using B model specifications. It proposes an approach to generate test cases from requirements specifications written in B. The key advantages are that B specifications remove inconsistencies and ambiguity from natural language requirements. The approach annotates requirements with identifiers to help track requirement coverage during testing. Test cases are generated from the formal B specifications that can then be used to test the system and ensure requirements are met.
The document describes the Sea-Bird Test Set DOSTS-1000, which was designed to automate testing of Sea-Bird Electronics' SBE 43 and SBE 43F Dissolved Oxygen sensors. The test set streamlines the testing process for technicians and reduces turnover times for sensor maintenance and repairs. It was designed with isolated circuitry to test the sensors' isolated circuitry and includes signal conditioning, a capacitor/resistor selector, power supplies, and a microcontroller. The hardware design includes a 4-layer PCB that controls automated testing through firmware, and the completed project deliverables include the prototype test set hardware and documentation.
SK.Abbas has over 3 years of experience in project engineering and quality roles in the solar energy industry. He is currently a Project Engineer in Quality at Maharishi Solar Technology, where he designs solar PV systems, performs inspections and testing, and ensures technical specifications are met. Previously, he worked as an Assistant Engineer in Quality at Voltech Engineer, where he helped coordinate quality management systems, inspections, certifications, and vendor evaluations and management. He holds a B.Tech in Electronic and Instrumentation Engineering.
2008 Asts Technical Paper Protocol Aware Ate SubmittedEric Larson
1. Modern semiconductor devices often behave in a non-deterministic manner during testing on automatic test equipment (ATE) due to the use of asynchronous IP blocks and industry standard protocols.
2. Current ATE architectures assume deterministic behavior and have difficulty handling variations in timing and output order, resulting in long test times and inadequate fault coverage.
3. A proposed solution is a protocol aware ATE that can natively emulate real-time chip I/O at the protocol level, enabling more complete functional testing similar to "mission mode" operation.
Wuderlich Malec Engineering - Modular ConstructionJoel Gil
The document discusses the advantages of modular construction for reducing construction costs and schedules. It presents a case study showing that modular construction using prefabricated, pre-tested electrical control enclosures can reduce total project costs by 48% and shorten the project schedule by 16 working days compared to traditional on-site construction methods. The modular approach improves quality, increases safety, and reduces risks by performing complex integration and testing off-site in a controlled factory environment before delivery.
This document defines failure and outlines a failure analysis process. It defines failure as the inability of a system or component to perform its required functions under stated conditions for a specified period of time. It then lists potential causes of failure such as production issues, out of specification operating environments, component flaws, design flaws, wear out, software issues, and mechanical issues. Finally, it outlines a failure analysis process that involves receiving components from the production line, performing visual inspections, analyzing date codes, mapping component locations, and investigating various potential root causes through testing, data analysis, and component inspections.
Rachand N. C. has over 9 years of experience as an electrical quality control inspector, including more than 2.5 years of experience on Gulf projects. He has a diploma in electronics and communication and has worked on projects in the UAE and Qatar. His responsibilities include performing inspections, approving materials, issuing non-compliance reports, ensuring work meets specifications and standards, and coordinating with contractors, subcontractors, and clients. He is proficient in inspection and quality control software and has experience across various electrical systems including power distribution, lighting, earthing, and ELV systems.
Qiang Han has over 13 years of experience as a senior engineer specializing in power system planning, analysis, modeling and simulation. He has a proven track record of leading large, complex projects for utilities and completing them on time and within budget. His areas of expertise include transmission planning, dynamic and transient stability analysis, power flow simulation tools, generator testing, and software development.
Marcus Meadows has over 20 years of experience in electronics assembly, testing, and repair. He has an associate's degree in electronic engineering technology and certifications in soldering. His experience includes positions as a technician performing assembly, testing, and repair of electronic equipment such as servers, networking devices, and industrial control systems.
This document provides a summary of qualifications and work experience for Ken F. Evans, an electronics engineer with a B.S. in electronics engineering and pursuing a PMP certificate. He has over 20 years of experience in systems engineering roles on various defense programs, including experience with requirements development and verification, testing, and project management. His most recent roles include supporting the KC-46A tanker program and P-8 multi-mission aircraft program at Boeing.
Mohammed Obaidullah Mujahed is seeking a position as a QA/QC Communication Engineer with 9 years of experience in low current systems and telecommunications. He has a Bachelor's degree in Electronics and Communication Engineering and has worked on projects in Saudi Arabia and India, including petrochemical plants and high rise buildings. His responsibilities have included reviewing engineering drawings, inspecting installations, testing cables, and ensuring work is completed according to specifications.
Printed circuit board (PCB) functional tester performs critical validation process performed on manufactured PCBs to verify the board’s functionality meets the original design requirements and specifications. Thorough functional testing helps ensure the reliability and performance of PCBs before deployment.
Testing coverage-
Validate continuity and isolation: Verify electrical connectivity and isolation between traces using in-circuit testing (ICT) and flying probe testing to check for opens and shorts.
Confirm impedance: Match measured impedance of traces and interconnects to design values to prevent signal degradation.
Verify power integrity: Check PCB operation under different power conditions to avoid errors from insufficient power delivery.
Assess signal integrity: Examine signal quality under high-speed conditions to prevent distortion and interference.
Test functionality: Stimulate the PCB with input signals and power to check outputs match expected responses based on design.
Confirm robustness: Subject PCB to temperature cycling, vibration, shock to validate resilience and durability.
Execute regression testing: Retest functionality after modifications to ensure no side effects.
Michael A. Leeper is an electrical engineer with experience in electronic systems design, printed circuit board design, and troubleshooting. He has a BS in Electrical Engineering from New Mexico State University and post-graduate coursework from UC Berkeley. His experience includes work as an engineer at several companies developing electronic systems for industries such as semiconductor manufacturing and disk drives.
PCB Assembly Testing and Inspection, from Hitech Circuits Co., Limited.pdfCynthia HitechPCB
PCB Assembly Testing and Inspection
PCBA testing refers to the test of electrical conductivity and input-output value based on PCBA board with electronic components.
Why PCBA testing?
In the design of PCB, there is a numerical relationship between different test points, such as voltage and current. However, the process flow of PCBA production and processing is very complex, including many important processes such as the PCB manufacturing process, component procurement, and inspection, SMT patch assembly, dip plug-in PCBA test. In the process of production and processing, various problems may occur due to improper equipment or operation. Therefore, it is necessary to use professional test equipment or a manual multimeter to test the test points, To verify whether the actual PCBA Board meets the design requirements and ensure that each product will not have quality problems.
PCBA testing is a key step to ensure the quality of production and delivery. FCT test fixture is made according to the test point program and test steps designed by customers, and then the PCBA board is placed on the FCT test rack to complete the test.
Testing is crucial to ensure high quality products are delivered to customers. Thankfully board assemblers offer multiple layers of testing and inspection to ensure high-quality, assembled Circuit boards are produced and delivered to customers. Despite all efforts to prevent errors, printed circuit board assembly is a complex process and defects sometimes occur relating to a variety of issues from incorrect component loading to failures in SMT equipment. Thorough testing and inspection occurs throughout the production process to ensure problems are captured early on, ensuring high quality and yield.
https://www.hitechpcba.com
PCBA testing refers to the test of electrical conductivity and input-output value based on PCBA board with electronic components.
PCBA SMT processing is very complicated and includes multiple important processes, such as PCB board manufacturing process, component procurement and inspection, SMT assembly, DIP, and PCBA testing. Among them, PCBA testing is the most critical quality control step in the entire PCBA processing process. The testing determines the final performance of the product.
Radio Frequency Test Stands for Remote ControllersUjjal Dutt, PMP
The document describes the development of four test stands for testing radio frequency remote control components using LabVIEW and LabVIEW Test Executive. Key challenges included the complexity of tests, parallel product and test stand development, and managing a large team. Test stands were developed for transmitter PCB, receiver PCB, receiver assembly, and transmitter assembly. LabVIEW Test Executive provided an easily customizable solution that met requirements like automatic test sequencing and configurable security levels. Individual tests were developed as LabVIEW VIs and integrated into the test sequence using state queues.
This presentation is designed as per Unit V - Electronic Product Design (Elective II)-SPPU Syllabus. This Study material is useful for BE E & TC students.
Craig Bushman is an upcoming graduate with experience as a technician, engineer, and project manager. He has worked for several electronics companies since 2012, performing tasks like circuit board assembly, testing, repair, and quality assurance. Bushman has a bachelor's degree in electrical engineering and is proficient with various software tools and electronics equipment. He is seeking a position where he can apply his engineering and technical skills.
Testing strategies for electronic componentsDepEd-Bataan
This document discusses different types of testing strategies for electronic components, including passive electronic components, dynamic testing, and in-circuit testing. It defines passive electronic components as those that cannot control electric current with another signal, such as capacitors, resistors, and inductors. Dynamic testing evaluates the mechanical endurance and integrity of electronics under static, dynamic and fatigue conditions. In-circuit testing uses a tester with drivers and sensors to check that components are correctly placed and valued on printed circuit boards by performing simple resistance, capacitance and inductance measurements between points.
Robert Parcon is seeking a job in electrical engineering technology that utilizes his education and experience. He has over 9 years of experience in production, manufacturing, and calibration roles. He is skilled in testing circuitry, reading schematics, and troubleshooting electrical equipment. His experience includes roles at WMATA, Transcat, Alstom Signaling, MKS Instruments, and other companies. He has a strong technical background and multiple professional references.
INSPECTION AND TEST PROCEDURES FOR SWITCHGEAR AND SWITCHBOARDhussein ibrahim
The document outlines inspection and test procedures for switchgear and switchboard assemblies. It details various visual and mechanical inspections such as checking equipment nameplates, physical condition, anchorage and clearances. It also specifies electrical tests including insulation resistance tests, dielectric withstand tests and current injection tests. Test values are provided for comparing insulation resistance values, bolt torque levels and more. The purpose is to verify equipment is in good working order and installed according to design specifications and manufacturer recommendations.
FAST is a test system developed by Benetel that automates wireless product compliance testing to save time and costs. It tests 3G devices against 3GPP specifications for transmitter and receiver characteristics. The FAST system controls test instruments using customized software and a test set with integrated filters. It provides automated testing over various parameters, stores results in a database, and generates test reports. Key benefits include reduced verification times, improved quality through extensive testing, and freeing up engineers for more productive work.
The document discusses testing functional requirements using B model specifications. It proposes an approach to generate test cases from requirements specifications written in B. The key advantages are that B specifications remove inconsistencies and ambiguity from natural language requirements. The approach annotates requirements with identifiers to help track requirement coverage during testing. Test cases are generated from the formal B specifications that can then be used to test the system and ensure requirements are met.
The document describes the Sea-Bird Test Set DOSTS-1000, which was designed to automate testing of Sea-Bird Electronics' SBE 43 and SBE 43F Dissolved Oxygen sensors. The test set streamlines the testing process for technicians and reduces turnover times for sensor maintenance and repairs. It was designed with isolated circuitry to test the sensors' isolated circuitry and includes signal conditioning, a capacitor/resistor selector, power supplies, and a microcontroller. The hardware design includes a 4-layer PCB that controls automated testing through firmware, and the completed project deliverables include the prototype test set hardware and documentation.
SK.Abbas has over 3 years of experience in project engineering and quality roles in the solar energy industry. He is currently a Project Engineer in Quality at Maharishi Solar Technology, where he designs solar PV systems, performs inspections and testing, and ensures technical specifications are met. Previously, he worked as an Assistant Engineer in Quality at Voltech Engineer, where he helped coordinate quality management systems, inspections, certifications, and vendor evaluations and management. He holds a B.Tech in Electronic and Instrumentation Engineering.
2008 Asts Technical Paper Protocol Aware Ate SubmittedEric Larson
1. Modern semiconductor devices often behave in a non-deterministic manner during testing on automatic test equipment (ATE) due to the use of asynchronous IP blocks and industry standard protocols.
2. Current ATE architectures assume deterministic behavior and have difficulty handling variations in timing and output order, resulting in long test times and inadequate fault coverage.
3. A proposed solution is a protocol aware ATE that can natively emulate real-time chip I/O at the protocol level, enabling more complete functional testing similar to "mission mode" operation.
Wuderlich Malec Engineering - Modular ConstructionJoel Gil
The document discusses the advantages of modular construction for reducing construction costs and schedules. It presents a case study showing that modular construction using prefabricated, pre-tested electrical control enclosures can reduce total project costs by 48% and shorten the project schedule by 16 working days compared to traditional on-site construction methods. The modular approach improves quality, increases safety, and reduces risks by performing complex integration and testing off-site in a controlled factory environment before delivery.
This document defines failure and outlines a failure analysis process. It defines failure as the inability of a system or component to perform its required functions under stated conditions for a specified period of time. It then lists potential causes of failure such as production issues, out of specification operating environments, component flaws, design flaws, wear out, software issues, and mechanical issues. Finally, it outlines a failure analysis process that involves receiving components from the production line, performing visual inspections, analyzing date codes, mapping component locations, and investigating various potential root causes through testing, data analysis, and component inspections.
Rachand N. C. has over 9 years of experience as an electrical quality control inspector, including more than 2.5 years of experience on Gulf projects. He has a diploma in electronics and communication and has worked on projects in the UAE and Qatar. His responsibilities include performing inspections, approving materials, issuing non-compliance reports, ensuring work meets specifications and standards, and coordinating with contractors, subcontractors, and clients. He is proficient in inspection and quality control software and has experience across various electrical systems including power distribution, lighting, earthing, and ELV systems.
Qiang Han has over 13 years of experience as a senior engineer specializing in power system planning, analysis, modeling and simulation. He has a proven track record of leading large, complex projects for utilities and completing them on time and within budget. His areas of expertise include transmission planning, dynamic and transient stability analysis, power flow simulation tools, generator testing, and software development.
Marcus Meadows has over 20 years of experience in electronics assembly, testing, and repair. He has an associate's degree in electronic engineering technology and certifications in soldering. His experience includes positions as a technician performing assembly, testing, and repair of electronic equipment such as servers, networking devices, and industrial control systems.
This document provides a summary of qualifications and work experience for Ken F. Evans, an electronics engineer with a B.S. in electronics engineering and pursuing a PMP certificate. He has over 20 years of experience in systems engineering roles on various defense programs, including experience with requirements development and verification, testing, and project management. His most recent roles include supporting the KC-46A tanker program and P-8 multi-mission aircraft program at Boeing.
Mohammed Obaidullah Mujahed is seeking a position as a QA/QC Communication Engineer with 9 years of experience in low current systems and telecommunications. He has a Bachelor's degree in Electronics and Communication Engineering and has worked on projects in Saudi Arabia and India, including petrochemical plants and high rise buildings. His responsibilities have included reviewing engineering drawings, inspecting installations, testing cables, and ensuring work is completed according to specifications.
Printed circuit board (PCB) functional tester performs critical validation process performed on manufactured PCBs to verify the board’s functionality meets the original design requirements and specifications. Thorough functional testing helps ensure the reliability and performance of PCBs before deployment.
Testing coverage-
Validate continuity and isolation: Verify electrical connectivity and isolation between traces using in-circuit testing (ICT) and flying probe testing to check for opens and shorts.
Confirm impedance: Match measured impedance of traces and interconnects to design values to prevent signal degradation.
Verify power integrity: Check PCB operation under different power conditions to avoid errors from insufficient power delivery.
Assess signal integrity: Examine signal quality under high-speed conditions to prevent distortion and interference.
Test functionality: Stimulate the PCB with input signals and power to check outputs match expected responses based on design.
Confirm robustness: Subject PCB to temperature cycling, vibration, shock to validate resilience and durability.
Execute regression testing: Retest functionality after modifications to ensure no side effects.
Michael A. Leeper is an electrical engineer with experience in electronic systems design, printed circuit board design, and troubleshooting. He has a BS in Electrical Engineering from New Mexico State University and post-graduate coursework from UC Berkeley. His experience includes work as an engineer at several companies developing electronic systems for industries such as semiconductor manufacturing and disk drives.
PCB Assembly Testing and Inspection, from Hitech Circuits Co., Limited.pdfCynthia HitechPCB
PCB Assembly Testing and Inspection
PCBA testing refers to the test of electrical conductivity and input-output value based on PCBA board with electronic components.
Why PCBA testing?
In the design of PCB, there is a numerical relationship between different test points, such as voltage and current. However, the process flow of PCBA production and processing is very complex, including many important processes such as the PCB manufacturing process, component procurement, and inspection, SMT patch assembly, dip plug-in PCBA test. In the process of production and processing, various problems may occur due to improper equipment or operation. Therefore, it is necessary to use professional test equipment or a manual multimeter to test the test points, To verify whether the actual PCBA Board meets the design requirements and ensure that each product will not have quality problems.
PCBA testing is a key step to ensure the quality of production and delivery. FCT test fixture is made according to the test point program and test steps designed by customers, and then the PCBA board is placed on the FCT test rack to complete the test.
Testing is crucial to ensure high quality products are delivered to customers. Thankfully board assemblers offer multiple layers of testing and inspection to ensure high-quality, assembled Circuit boards are produced and delivered to customers. Despite all efforts to prevent errors, printed circuit board assembly is a complex process and defects sometimes occur relating to a variety of issues from incorrect component loading to failures in SMT equipment. Thorough testing and inspection occurs throughout the production process to ensure problems are captured early on, ensuring high quality and yield.
https://www.hitechpcba.com
PCBA testing refers to the test of electrical conductivity and input-output value based on PCBA board with electronic components.
PCBA SMT processing is very complicated and includes multiple important processes, such as PCB board manufacturing process, component procurement and inspection, SMT assembly, DIP, and PCBA testing. Among them, PCBA testing is the most critical quality control step in the entire PCBA processing process. The testing determines the final performance of the product.
Radio Frequency Test Stands for Remote ControllersUjjal Dutt, PMP
The document describes the development of four test stands for testing radio frequency remote control components using LabVIEW and LabVIEW Test Executive. Key challenges included the complexity of tests, parallel product and test stand development, and managing a large team. Test stands were developed for transmitter PCB, receiver PCB, receiver assembly, and transmitter assembly. LabVIEW Test Executive provided an easily customizable solution that met requirements like automatic test sequencing and configurable security levels. Individual tests were developed as LabVIEW VIs and integrated into the test sequence using state queues.
This presentation is designed as per Unit V - Electronic Product Design (Elective II)-SPPU Syllabus. This Study material is useful for BE E & TC students.
Craig Bushman is an upcoming graduate with experience as a technician, engineer, and project manager. He has worked for several electronics companies since 2012, performing tasks like circuit board assembly, testing, repair, and quality assurance. Bushman has a bachelor's degree in electrical engineering and is proficient with various software tools and electronics equipment. He is seeking a position where he can apply his engineering and technical skills.
Testing strategies for electronic componentsDepEd-Bataan
This document discusses different types of testing strategies for electronic components, including passive electronic components, dynamic testing, and in-circuit testing. It defines passive electronic components as those that cannot control electric current with another signal, such as capacitors, resistors, and inductors. Dynamic testing evaluates the mechanical endurance and integrity of electronics under static, dynamic and fatigue conditions. In-circuit testing uses a tester with drivers and sensors to check that components are correctly placed and valued on printed circuit boards by performing simple resistance, capacitance and inductance measurements between points.
CV of Rosanna Ester Navarro Acosta Feb 2016Rosanna Acosta
Rosanna Navarro Acosta has over 20 years of experience in quality engineering and assurance roles. She is fluent in English and Filipino with intermediate skills in Spanish and Cantonese. She holds a Bachelor's degree in Electronics and Communications Engineering and has worked for several companies in Hong Kong and the Philippines performing quality control inspections, reliability testing, and ensuring products meet various industry standards. She has experience across many product categories including appliances, audio/video equipment, toys, and power tools.
Gerry Bicknaver has over 30 years of experience as an electronic technician. He has worked testing, repairing, and developing electronic devices for companies in various industries. His background includes associate's degrees in electrical engineering technology and liberal arts. He is a licensed amateur radio operator and volunteers with emergency response organizations.
Testing strategies for electronics involve various techniques and methodologies to ensure the quality, functionality, and reliability of electronic components, circuits, devices, and systems. Here are some common testing strategies used in the electronics industry:
Unit Testing: This involves testing individual electronic components, such as resistors, capacitors, transistors, integrated circuits (ICs), etc., to ensure they meet specifications and function correctly. Unit testing is typically performed using specialized equipment like multimeters, oscilloscopes, and function generators.
Functional Testing: This tests the functionality of electronic devices or systems as a whole. It verifies whether the device or system performs its intended functions correctly according to the specifications. Functional testing often involves applying input signals and observing output responses. Automated test equipment (ATE) and test scripts are commonly used for functional testing.
In-Circuit Testing (ICT): ICT is used to test electronic circuits and PCBs (Printed Circuit Boards) while they are still in production. It verifies the integrity of the connections and the functionality of individual components by applying test signals to specific nodes on the circuit and measuring responses. ICT can identify defects such as open circuits, short circuits, incorrect component values, etc.
Boundary Scan Testing: Boundary scan, based on the IEEE 1149.1 standard (commonly known as JTAG), is used for testing digital integrated circuits. It allows for testing the interconnects between integrated circuits on a PCB and verifying the functionality of these connections. Boundary scan testing can be performed during manufacturing or in-circuit testing.
Environmental Testing: This involves subjecting electronic devices or systems to various environmental conditions such as temperature extremes, humidity, vibration, and shock to assess their performance and reliability under different operating conditions. Environmental testing helps identify potential weak points and ensures products meet specified standards and requirements.
Burn-In Testing: Burn-in testing involves subjecting electronic components or systems to prolonged operation under normal or accelerated conditions to identify potential early failures. This stress testing helps detect latent defects and ensures product reliability over its expected lifespan.
Automated Testing: Automation of testing processes using specialized test equipment and software can improve efficiency, consistency, and reliability of testing. Automated test systems can execute test scripts, analyze test results, and provide detailed reports, reducing manual effort and human error.
Regression Testing: For iterative development processes, regression testing ensures that modifications or updates to electronic components or systems do not adversely affect previously tested functionality. It involves rerunning previously conducted tests valid.
Muhammad Nouman is an E&I Engineer with over 3 years of experience in Saudi Arabia. He has a Bachelor's Degree in Electrical and Electronics Engineering. His most recent role was as an E&I Engineer from May 2015 to March 2016 for Ever Green Contracting East, where he was responsible for inspection, testing, and commissioning of electrical and instrumentation systems for an oil and gas pipeline project. He is proficient in English and seeks the position of E&I Engineer on a new project.
This document provides a summary of a professional technician with over 30 years of experience in the electronic industry, including extensive experience testing and repairing circuit boards, working closely with engineering teams, and training other technicians. They have a strong record of self-motivated work, problem-solving skills, and experience with a wide range of electronic testing equipment.
This document provides a summary of a professional technician with over 30 years of experience in the electronic industry, including extensive experience testing and repairing circuit boards, working closely with engineering teams, and training other technicians. They have a strong record of self-motivated work, problem-solving skills, and experience with a wide range of electronic testing equipment.
This document provides a summary of a professional technician with over 30 years of experience in the electronic industry, including extensive experience testing and repairing circuit boards, working closely with engineering teams, and training other technicians. They have a history of self-motivated work as a team player with strong mechanical and problem-solving skills.
This document provides a summary of a professional technician with over 30 years of experience in the electronic industry, including extensive experience testing and repairing circuit boards, working closely with engineering teams, and training other technicians. They have a history of self-motivated work as a team player with strong mechanical and problem-solving skills.
This document provides a summary of a professional technician with over 30 years of experience in the electronic industry, including extensive experience testing and repairing circuit boards, working closely with engineering teams, and training other technicians. They have a history of self-motivated and team-oriented work across several companies in the electronic and aerospace industries.
Mohammad Yousuf Ahmed N is seeking a position as a Project Engineer where he can utilize his educational and technical skills in process instrumentation and control. He has over 20 years of experience in instrumentation construction, pre-commissioning, and commissioning. Some of his responsibilities have included installing, testing, and calibrating various field instruments; loop checking instrumentation from DCS; and ensuring quality control. He is proficient in instrumentation standards and has experience programming PLCs and working with DCS, SCADA, and fire and gas systems.
This document discusses VLSI testing and analysis. It defines key terms like defect, fault, and error and describes typical types of defects. It also discusses logical fault models and the role of testing in quality control. Different types of tests like production testing and burn-in testing are described. The testing process, fault simulation, design for testability techniques, and built-in self-test are summarized.
Vijayananda Mohire worked as an assistant engineer on a project from 1996-2000 in Bangalore, India to develop an Engineering Test Station (ETS) to test avionic units for aircraft. The ETS was used to simulate conditions and test devices like flight control computers and communication devices. As an assistant engineer, Mohire's role included analyzing devices, designing hardware and software interfaces, developing test cases, and validating units. He leveraged equipment like oscilloscopes and bus testers at the test station to interface devices and confirm their proper functioning. Mohire adapted strategies like observing colleagues, keeping an official diary, and collaborating with others on the team.
Similar to Fct Test Fixtures | Equip-test.com (20)
FCT is used to detect failed components on finished PCBs before they are shipped. The functional test verifies PCB’s functionality to emphasize its function, development, and procedure to distinguish from PCB to PCB and system to system. Depending on the PCB, we have a wide range of test probes, for instance, multi-purpose probes, interface probes, fixture customizing probe, high-current probe, and a lot more. For more information visit https://bit.ly/3RfmPhU
Takaya Flying Test is one of the most durable and provides high-accuracy, high-speed, and good-quality long lasting mechanics. Flying Probe machines, like those offered by Takaya, can probe the ends of component pads and uncovered vias to get access to the electrical networks.
Kelvin probe enables nanometer-scale imaging in a microscope and is highly used to determine the materials based on a vibrating capacitor and measures. You can also check for lead- free probes, ICT test probes, microprobes, multi-purpose probes, interface probes, fixture customizing probes, and many more. Check our site to know more about tools and products or call us at +36 1 533 3165 for any query.
We provide an in-line test system that covers all complex electronics, industrial products such as PCBAs, injection-molded car, and truck parts. They are best due to the modular structure and can be stand-alone. Our systems are cost-effective and easy to maintain. If you are looking for more information on the in-line test system, contact us at +36 1 533 3165.
Functional test fixtures validate the product by freeing any defects that may impact the function of the system application. Functional test division must conduct tests to verify the function and behavior of a PCB. We have a wide collection of test probes and fixtures to tests defect, if you are interested in buying our products, contact us at +36 1 533 3165.For more information visit https://bit.ly/3aiI7ur
In-circuit test system consists of individual probes to contact the test points on the assembled printed circuit board. ICT and flying probes are used in the electronic assembly also include in-circuit and flying probes testers. The flying probe in-circuit testing technology is used for PCB design, PCB assembly test, and repairs applied to PCB design, PCB Assembly test, and repairs. For more details, visit https://equip-test.com/test-probes.php.For more information visit https://bit.ly/3PaSmQw
Kelvin probe enables nanometer-scale imaging in a microscope and is highly used to determine the materials based on a vibrating capacitor and measures. You can also check for lead- free probes, ICT test probes, microprobes, multi-purpose probes, interface probes, fixture customizing probes, and many more. Check our site to know more about tools and products or call us at +36 1 533 3165 for any query.
RF is any frequency within the electromagnetic spectrum associated with radio wave propagation. In RF testing, when an RF current is supplied to an antenna, an electromagnetic field is created that then is able to propagate through space. Many wireless technologies are based on RF field propagation
Spring-loaded test probe have long been a part of electrical and environmental testing, even though they consist of three or four discrete parts and can be laborious to assemble into probe assemblies.
The document discusses a new TRIO platform for in-circuit testing that features a manual test fixture, fast in-circuit tester, and reliable connectors. In-circuit testing uses a bed of nails to gain access to circuit nodes on a board and measure component performance regardless of other connections.
INGUN high current test probes are divided into two parts. During the stroke motion both plunger parts are deflected away from each other in a radial direction. This cause the plunger parts to press against the barrel and the internal resistance (Ri) is reduced.
http://equip-test.com/ingun-test-probes/
In the testing of printed circuit boards, a flying probe test or fixtureless in-circuit test (FICT) system may be used for testing low to mid volume production, prototypes, and boards those present accessibility problems.
The range of ICT test probes comprises all standard series of products which have established themselves on the market as international standards. These are test probes for centers from 50 mil to 100 mil with a large selection of different tip styles and contact pressures for almost all test requirements.
A cable harness can also be known as a cable assembly, wire harness, wiring loom or a wiring assembly, and is best described as a string of wires or cables that are capable of transmitting informational signals or operating currents. Data Patterns has built high reliability Cable Harness Test Systems for large installations. These are primarily used in launch vehicle aircraft and missile level cable harness test validation.
The range of ICT test probes comprises all standard series of products which have established themselves on the market as international standards. These are test probes for centers from 50 mil to 100 mil with a large selection of different tip styles and contact pressures for almost all test requirements.
Push-back test probes are used for the contacting of connectors when a “catch test” is necessary. In this case, a defined force is applied to the stop parts in order to check correct seating inside the connector or to check that the connector is locked in position.
INGUN high current test probes are divided into two parts. During the stroke motion, both plunger parts are deflected away from each other in a radial direction. This cause the plunger parts to press against the barrel and the internal resistance (Ri) is reduced.
We have made a wide standard of Test Probes devicesto provide the best solution for in accordance with the requirements. Visit our site http://equip-test.com to get to know more about it.
Equip-test is a leading manufacturer of testing equipment that offers well-designed Spring Contact Test Probes to meet customer testing needs. Customers can contact Equip-test at + 36-29 / 550-940 for more information about their testing probes and other equipment. Equip-test's website is http://www.equip-test.com.
We have made a wide standard of Test Probes devices to provide the best solution for in accordance with the requirements. Visit our site http://equip-test.com to get to know more about it.
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....Lacey Max
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
The Genesis of BriansClub.cm Famous Dark WEb PlatformSabaaSudozai
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Easily Verify Compliance and Security with Binance KYCAny kyc Account
Use our simple KYC verification guide to make sure your Binance account is safe and compliant. Discover the fundamentals, appreciate the significance of KYC, and trade on one of the biggest cryptocurrency exchanges with confidence.
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
1. FCT test fixtures – Save Your Time And Money While Using It In Testing
The equip-test referred to be an in house mechanical and electrical
design mostly tested in the electrical department by using the
experienced functional test feature applications. In FCT test fixtures,
many things are tested regularly, such as top & side contracting, linear
railing, LED check, Button press, display check, connector test, product
reading and none other than product making after the test. There are
many options are included in a functional test fixture and these are
derived from the requirement and specification of the projects.
From testing through connectors to ensure a good external connection
to probing from both top and bottom to make sure the test coverage is at
the level you require. Fixture pans can be fully loaded with external
circuitry as part of the FCT test fixtures. The programmers can be
installed many features into the pan and wired to probes for performing
the testing efficiently at the programming board.
Function test features check the entire intended function of a PCB.
According to the intended area of use, the environment is replicated and
the electrical performance of the PCB is checked. In FCT testing, the
dual well fixtures can be used that is very popular, so that while one
board is being tested another board can be loaded, this saves time and
increases your throughput as well as reduces costs by not having any
two fixtures.