The F2H-SANA Interferometer is a non-contact fiber endface measurement tool developed by Grandway Technology. It uses optical interference methods to measure geometric parameters of fiber connectors, bare fibers, and bare ferrules. It has auto-centering functions, an ergonomic design, generates automatic reports, and allows for both PC and APC fiber measurements with high repeatability and reproducibility.
1. F2H-SANA Interferometer
http://www.aliexpress.com/item/F2H-SANA-Interferometer/32451896152.html
SANA is a non contact fiber endface interferometer for single fiber connector
developed by Grandway Technology. SANA measures geometry parameters
by optical interference method. It can measure the parameters of fiber
connectors as well as bare fibers and bare ferrules. Focus handle and platform
with ergonomic design are very helpful to increase efficiency. SANA is
essential instrument in fiber connector manufacturing.
SANA is a non contact fiber endface interferometer for single fiber connector
developed by Dimension Technology; it is able to measure geometric
parameters of single fiber connector such as radius of curvature, apex offset
and fiber height as well as bare fibers and bare ferrules. SANA is an
interferometer with multiple usages.
SANA has auto centering functions and doesn’t need to adjust the fiber
positions by hand. The ergonomic designed focus handle increase the
efficiency of focus. The long lasting fixture is very precise so the cost of
maintenance is very low. SANA can generate the data and report automatically
that does a great help in manufacturing. SANA is essential instrument in fiber
connector manufacturing.
1.Powerful Test Functions
The universal 2.5mm and 1.25mm fixtures equipped with SANA are able to
test most kinds of connectors.2.5mm fixtures are able to test connectors such
as FC/PC, SC/PC, ST/PC, E2000/PC, DIN, FC/APC, SC/AP. 1.25mm fixtures
are able to test connectors such as LC/PC, MU/PC, LC/APC. No need to
change fixtures or calibration in APC/PC conversion, you only need change
the angle of the platform.
2. 2. Auto Centering
The newly designed fixture and software provide high precision, you can just
click the "Center Image" button to centering the fiber other than adjust the
position by hand.
3 Simple and User Friendly Interfaces and Excellent 3D Images
The software of SANA is simple and user friendly, you can change the
language within the software. It provide many endface rebuild method such as
3D, 2D, plot to assist the engineers about the process. The test reports and
data are generated automatically for analyzing and tracing.
4 Bare Ferrule Measurement
Measuring Radius of Curvature(ROC), Apex Offset and Roughness (Ferrule
Ra and Ferrule Rq)
3. 5 Bare Fiber Measurement
6 Flat Polishing Measurement
7 Easy and Fast Calibration
SANA uses 6 point calibration method, the whole calibration sequence costs
for 2-3 min and don't need to adjust the hardware because of the software.
Features
1. Auto centering
2. Auto test mode
3. Need only 1.5s to test a connector
4. Bare fiber and ferrule testing
5. Easy PC /APC changing
6. Series of long lasting fixtures
7. Auto generate data and report in excel format
8. Test by Telcordia
4. Item Range Repeatability Reproducibly
ROC *(mm) 1 to flat 0.1% 0.2%
Fiber Height *(nm) -160~+160 +/-1 +/-2
Apex Offset*(um) 0~200 +/-0.5 +/-1.5
APC Angle *(°) 0(PC)or 8(APC) 0.01 0.02
Test Speed (s) 1.5s
Light Source Red light LED
Weight 5.5kg(mainframe)
Size L32*W16.2*H10(cm)
Software Interface
3D Image