Presentation of the hot-dip galvanising process and of the different parameters that are important when choosing one product over another.
There are two suggestions for different types of treatment lines: a fully acid line with enhanced protection for rough environments needing passivation and another line with alkaline degreasing for extremely greasy parts.
Presentation of the hot-dip galvanising process and of the different parameters that are important when choosing one product over another.
There are two suggestions for different types of treatment lines: a fully acid line with enhanced protection for rough environments needing passivation and another line with alkaline degreasing for extremely greasy parts.
Poster presented at the AVS ALD 2005 conference. This contains Al2O3 solubility data in deionized water and a report on the "bubbles" which form on ALD Al2O3 when heated. This work has been cited sometimes especially for the bubble formation, and now I want to make it easily accessible for all.
---
Controlling the Solubility of ALD Aluminium Oxide in Deionised Water
Riikka L. Puurunen, Jyrki Kiihamäki and Hannu Kattelus
VTT Technical Research Centre of Finland
Here is a “Consumer Goods Datasheet Template“. TDSmaker offer you free Datasheet/ Specsheet/ Techsheet. Visit to ( https://www.tdsmaker.com ) to get start with free template.
Filtration is any of quite a lot of mechanical, physical or biological operations that separate solids from fluids (drinks or gases) through including a medium by means of which handiest the fluid can go. The fluid that passes by means of is known as the filtrate.
Chm Lab: FILTRATION & MICROFILTRATION NEW POSSIBILITIES IN FILTRATIONBMScientific
CHMLAB Group is a specialized company in separation, filtration and purification products with the aim to fulfil the customer requirements in the scientific community.
Our innovative and high-quality products help customers in laboratories and processes in a time- and cost-efficient way. Our vision is to provide the best quality and high-end performance products.
Our key customers are from industries of bioscience, pharmaceutical, medical and food, as well as universities, public research institutes and laboratories.
CHMLAB has the head office in Barcelona, and operates worldwide through local partners in more than 65 countries.
Poster presented at the AVS ALD 2005 conference. This contains Al2O3 solubility data in deionized water and a report on the "bubbles" which form on ALD Al2O3 when heated. This work has been cited sometimes especially for the bubble formation, and now I want to make it easily accessible for all.
---
Controlling the Solubility of ALD Aluminium Oxide in Deionised Water
Riikka L. Puurunen, Jyrki Kiihamäki and Hannu Kattelus
VTT Technical Research Centre of Finland
Here is a “Consumer Goods Datasheet Template“. TDSmaker offer you free Datasheet/ Specsheet/ Techsheet. Visit to ( https://www.tdsmaker.com ) to get start with free template.
Filtration is any of quite a lot of mechanical, physical or biological operations that separate solids from fluids (drinks or gases) through including a medium by means of which handiest the fluid can go. The fluid that passes by means of is known as the filtrate.
Chm Lab: FILTRATION & MICROFILTRATION NEW POSSIBILITIES IN FILTRATIONBMScientific
CHMLAB Group is a specialized company in separation, filtration and purification products with the aim to fulfil the customer requirements in the scientific community.
Our innovative and high-quality products help customers in laboratories and processes in a time- and cost-efficient way. Our vision is to provide the best quality and high-end performance products.
Our key customers are from industries of bioscience, pharmaceutical, medical and food, as well as universities, public research institutes and laboratories.
CHMLAB has the head office in Barcelona, and operates worldwide through local partners in more than 65 countries.
Measuring N-protein has never been that inexpensive! Moreover, we are glad to introduce our alternatives to helium as carrier gas. Never get the helium sticker shock again. This webinar focuses on laboratories within the food and feed sector.
N-protein determination according to the Dumas principle is an industry-proven method with outstanding reliability and robustness. Application areas range from food and beverages to animal feed and pet food. No matter whether it’s beer, soy sauce, cat food, liquid, viscos, solid or a gel - Elementar’s analyzers offer utmost sample flexibility.
Innovative EAS REGAINER technology: reliable and inexpensive
Learn from our experts how Elementar’s patented EAS REGAINER® technology helps to reduce cost per analysis by approx. 50%. Measuring N-protein has never been that inexpensive! Moreover, we are glad to introduce our alternatives to helium as carrier gas. Never get the helium sticker shock again.
Wastewater is produced by multiple sources, including chemical manufacturing, power generation, petroleum product extraction, and private residences. Specific industries can use knowledge of around the analytes present in wastewater to make decisions on reuse, treatment, or whether disposal is the most cost effective option. Prior to any discharge into ground or surface waters, the level of specific analytes must be determined to ensure that they do not exceed regulated limits. If these limits are being exceeded, treatment will be required. Ion Chromatography (IC) is the primary technique used for measuring the concentration of ions in wastewater and numerous methods have been developed that meet regulatory requirements. Learn about IC methods that enable accurate, consistent, and rapid measurement of both anions, such as chloride, sulfate, and bromate, and cations, such as sodium and magnesium.
Third edition INNPT Nano Particles in wastewater treatment presentation 30 s...Medhat Gad
using Nano particles in wastewater treatment to remove TSS,BOD,COD and pathogenic bacteria
INNPT stands for Innovative Nadic Nano particles Technology
our INNPT products works as chemical precipitation agent, Adsorbent with a huge surface area and very high negative charges
POWERED BY PERFORMANCE OurTyrone plant has a long history of satisfying customers who demand quick turnaround, superior products, scale-up/scale-down flexibility and a wide range of industry experience. The ISO-9000 and RC-14000-registered facility sits on 120 acres in a small town, employs more than 150 area residents and boasts an excellent safety record.
GENERAL: Office Waste, Domestic Waste
INFECTITIOUS: Hospital Waste, Research Lab, Waste
CHEMICAL: Pharmaceutical, Chemical, Pesticides, Refineries, etc.
Infectitious and chemical wastes are together termed as hazardous.
Monitoring and maintaining water purity are important to the power and electronics industries. In the both of these industries, impurities must be minimized and monitored to prevent corrosion or scaling, and degradation in demineralization processes. Learn about the analysis of ppb concentrations of ionic contaminants in high purity water using two easy methods: a direct large volume injection and concentration of a large volume injection, using electrolytically generated hydroxide eluents on a Reagent-Free™ Ion Chromatography system (RFIC™).
We develop technology and generate business opportunities for eco-industry and other industrial sectors, focusing our activities in solving their environmental problems …
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
1. Your Reliable Partner for
Custom Syntheses
Fine Chemicals
made in Germany
Equipment and Capabilities
Safety, Responsible Care and
Environmental Protection
• Exhaust- and waste water control
• Solvent recycling
• Responsible care
• REACH compliance
ORGANICA Feinchemie GmbH Wolfen
Kunstseidestr. 5
06766 Bitterfeld-Wolfen
GERMANY
Tel +49-3494-63-6215
Fax +49-3494-63-6165
info@organica.de
www.organica.de
Certifications
• ISO 9001:2008
• Responsible Care
• FDA certification
Analytical Test Methods
• HPLC, GC, GC-MS, FT-IR
• UV-vis- + fluorescence spectroscopy
• Differential scanning calorimetry (DSC)
• Loss on drying (IR, Halogen, vacuum)
• Titration (automatically)
• Water titration (Karl-Fischer)
• NMR (1H-, 13C-, 19F-, 31P-)
• Atomic absorption spectroscopy (AAS)
2. Process Knowledge
More than 70 Types of Reaction
on Large Scale
• Condensation
• Heterocycle syntheses
• Amidation
• Heterogeneous catalysis
• Homogeneous catalysis
• Halogenation
• Sulfonation
• Reduction
+ Chiral hydrogenation
• Organocatalysis
• Oxidation
• Cyanation
• Diazotation
• Friedel- Crafts reactions
• Grignard reactions
• Heck reaction
• Suzuki coupling
(abridged – for full scope go to
www.organica.de)
Your Reliable Partner for Custom Syntheses
Equipment Capabilities Special Raw Materials
and Conditions
• 3 Fully equipped R&D laboratories
• GMP Kilo-Lab for Parenteralia
• Pilot plant
• Multipurpose plant
• 93 m³ reactor capacity in total
• Glass-lined & stainless steel
• Agitated filters, filter press, tray dryers,
vacuum tray dryers
• Hastelloy centrifuge and dryer
• H2
S, CS2
• NaN3
, KCN, POCl3
• SOCl2
, NH3
• Metal hydrides
• Hydrogenation
• Nitration (Oleum, HNO3
conc.)
• High Pressure Reactions
• Hazardous Reactions
Selection of our 61 Reactors
Type/Use Material Capacity Pressure Temperature
CS2 Stainless steel 630 l atm -10 to +80 °C
Low Temp. Stainless steel
+ Glass-lined
2500 l atm to 5 mbar -10 to +130 °C
1600 l atm to 3 mbar -25 to +150 °C
900 l atm -25 to +130 °C
400 l atm -10 to +135 °C
High Temp. Stainless steel
+ Glass-lined
1600 l atm to 3 mbar max. 230 °C
500 l atm to 3 mbar max. 230 °C
Autoclaves Stainless steel 500 l max. 50 bar max. 130 °C
Rectification Stainless steel
+ Glass-lined
8000 l atm max. 150 °C
1200 l full vacuum max. 140 °C