SPECTRO ANALYTICAL LABS LTD is one of the leading nabl accredited laboratories in India, also offering a wide range of Integrated Solutions in various Environmental Sectors. CDM is one area where SPECTRO offers its elite services.
The document discusses the neutroclimat initiative to promote low carbon products and services. It aims to (1) take action now to reduce carbon emissions rather than wait, (2) anticipate new consumption trends by making carbon neutral products more competitive, and (3) provide robust guarantees that carbon reductions are certified by the UN under the Kyoto Protocol. The initiative helps add value to smart energy products and services by labeling them as carbon neutral.
The document provides an overview of carbon credits and the Clean Development Mechanism (CDM) process. It discusses key topics like the Kyoto Protocol, requirements for CDM projects, generating carbon credits, the carbon market, project risks and pricing factors. The CDM allows emission-reduction projects in developing countries to earn certified emission reduction credits, which can be traded and sold, providing a revenue stream to offset project costs.
Presentation by Bikash Pandey, Deputy Chief of Party – USAID and the Director Clean Energy and Environment, Winrock International providing consultancy to Worldbank at a forum organized by Avanceon titled Financing Energy Optimization Projects with guaranteed IRR
This document summarizes key aspects of carbon offsets and the carbon offset market. It discusses the role of offsetting, what constitutes a carbon credit, ideal criteria for offsets, understanding additionality, types of carbon projects, certification standards, and transaction volumes in offsets.
Educational Material of Vietnam Blended Learning Program, undertaken by Institute of Energy Science, with support of World Bank and Vietnam Development Information Center
This chapter outlines the key participants, project types, and process involved in a Clean Development Mechanism (CDM) project. It describes the various entities that must be involved such as project developers, investors, host countries, operational entities, and the CDM Executive Board. It also explains the typical stages a project must go through from initial identification to validation, registration, verification and issuance of credits. Project types that are eligible under the CDM are also summarized, including energy efficiency, renewable energy, methane capture, and forestry projects. The chapter aims to provide readers with a basic understanding of the essential components and steps to successfully implement a CDM project.
This document provides an overview of the Clean Development Mechanism (CDM) under the Kyoto Protocol, including background information, requirements, and status updates from meetings of the Conference of Parties (COP) and Executive Board (EB). Key points include: the Kyoto Protocol established binding emission reduction targets and flexibility mechanisms like CDM; CDM allows projects in developing countries to earn emission credits that can be used by developed countries to meet their targets; and while no projects have been registered yet, progress is being made to establish methodologies and designate operational entities to validate projects.
Carbon neutrality is an approach for organizations and society to respond to climate change challenges. It involves measuring an organization's carbon footprint, reducing emissions as much as possible, and offsetting any remaining emissions. Standards like the GHG Protocol provide guidance on calculating footprints while PAS 2060 specifies requirements for demonstrating carbon neutrality. Some companies pursuing carbon neutrality include Ikea, which aims to be 100% neutral by 2020, Marks & Spencer which achieved neutrality in 2013, and Google which has been neutral since 2007. However, questions remain around how transparent claims are and whether current targets will help limit global warming to 2 degrees.
The document discusses the neutroclimat initiative to promote low carbon products and services. It aims to (1) take action now to reduce carbon emissions rather than wait, (2) anticipate new consumption trends by making carbon neutral products more competitive, and (3) provide robust guarantees that carbon reductions are certified by the UN under the Kyoto Protocol. The initiative helps add value to smart energy products and services by labeling them as carbon neutral.
The document provides an overview of carbon credits and the Clean Development Mechanism (CDM) process. It discusses key topics like the Kyoto Protocol, requirements for CDM projects, generating carbon credits, the carbon market, project risks and pricing factors. The CDM allows emission-reduction projects in developing countries to earn certified emission reduction credits, which can be traded and sold, providing a revenue stream to offset project costs.
Presentation by Bikash Pandey, Deputy Chief of Party – USAID and the Director Clean Energy and Environment, Winrock International providing consultancy to Worldbank at a forum organized by Avanceon titled Financing Energy Optimization Projects with guaranteed IRR
This document summarizes key aspects of carbon offsets and the carbon offset market. It discusses the role of offsetting, what constitutes a carbon credit, ideal criteria for offsets, understanding additionality, types of carbon projects, certification standards, and transaction volumes in offsets.
Educational Material of Vietnam Blended Learning Program, undertaken by Institute of Energy Science, with support of World Bank and Vietnam Development Information Center
This chapter outlines the key participants, project types, and process involved in a Clean Development Mechanism (CDM) project. It describes the various entities that must be involved such as project developers, investors, host countries, operational entities, and the CDM Executive Board. It also explains the typical stages a project must go through from initial identification to validation, registration, verification and issuance of credits. Project types that are eligible under the CDM are also summarized, including energy efficiency, renewable energy, methane capture, and forestry projects. The chapter aims to provide readers with a basic understanding of the essential components and steps to successfully implement a CDM project.
This document provides an overview of the Clean Development Mechanism (CDM) under the Kyoto Protocol, including background information, requirements, and status updates from meetings of the Conference of Parties (COP) and Executive Board (EB). Key points include: the Kyoto Protocol established binding emission reduction targets and flexibility mechanisms like CDM; CDM allows projects in developing countries to earn emission credits that can be used by developed countries to meet their targets; and while no projects have been registered yet, progress is being made to establish methodologies and designate operational entities to validate projects.
Carbon neutrality is an approach for organizations and society to respond to climate change challenges. It involves measuring an organization's carbon footprint, reducing emissions as much as possible, and offsetting any remaining emissions. Standards like the GHG Protocol provide guidance on calculating footprints while PAS 2060 specifies requirements for demonstrating carbon neutrality. Some companies pursuing carbon neutrality include Ikea, which aims to be 100% neutral by 2020, Marks & Spencer which achieved neutrality in 2013, and Google which has been neutral since 2007. However, questions remain around how transparent claims are and whether current targets will help limit global warming to 2 degrees.
Clean Development Mechanism (CDM) allows emission-reduction projects in developing countries to earn certified emission reduction (CER) credits, each equivalent to one tonne of CO2. The Kyoto Protocol established mechanisms for CDM. Projects go through validation, registration, verification and issuance of CERs. India has over 1,400 approved CDM projects expected to generate over 600 million CERs until 2012 across sectors like energy efficiency, renewable energy and waste management. Challenges include tapping potential from new sectors and developing large and programmatic CDM projects.
CDM-Process, Progress and challenges Indian PerspectiveNirav Modh
The Clean Development Mechanism (CDM) allows developing countries to earn certified emission reduction credits from greenhouse gas emission reduction projects that can be traded and sold to help industrialized countries meet emission reduction targets under the Kyoto Protocol. India has been very active in pursuing CDM projects, registering over 32% of total global CDM projects. However, Indian industries face challenges in fully adopting CDM projects due to lack of process driven development, low awareness, resistance to integrating CDM with main business operations, lack of policies and investment. The document then reviews the CDM project cycle and criteria for CDM project eligibility and design.
This presentation is about Clean Development Mechanism and focus is on power sector. key aspects covered are CDM world statistics, Indian scenario, CER prices, CDM project management, etc.
The purpose of the research was to determine the availability of alternative carbon revenue for renewable energy schemes in Zimbabwe taking Chipendeke Micro Hydro Scheme as a case study for the research. The research was based on how the Micro hydro power projects can benefit from the financing in terms of improved revenue provision as a source of income, it came up with the a comparison between carbon financed scheme and a non carbon financed scheme and explained how carbon finance affects the payback period of the project After analysis of the different carbon finance options available a design package of the carbon finance was done and it came up with the mechanism of carbon finance to be used, cost of project with and without carbon finance, how the carbon revenue would be used and the responsible parties for application and receipt of the funding.
This document provides an overview of international forest carbon markets and China's forest carbon sink potential. It discusses the background of carbon credit trading, types of carbon offset projects, international carbon standards (e.g. VCS, CCX, CAR), analyzes a case study of the CCX carbon market, and trends in the international carbon trading market. It also estimates China's potential to increase forest carbon sinks by 400 million hectares and 1.3 billion cubic meters of forest growth by 2020, absorbing approximately 2.4 billion tons of CO2.
An Analysis of Clean Development MechanismBaral Pradeep
The Clean Development Mechanism (CDM) allows developed countries to implement emissions reduction projects in developing countries and earn tradable carbon credits (CERs) for the reductions achieved. The CDM aims to help countries meet Kyoto targets while promoting sustainable development. Projects must demonstrate environmental additionality by proving reductions beyond business as usual. Registration and verification involve several steps overseen by Designated Operational Entities and the CDM Executive Board. Most CDM projects are in Asia focused on renewable energy and methane capture. However, the CDM faces challenges around additionality and local benefits. Recommendations include expanding demand for CERs and restricting supply to help address a market crash.
"Greenhouse Gas Protocol Corporate Standard, by World Resources Institute and World Business Council for Sustainable Development, March 2014." 2012, MIT.
Carbon Capture and Storage- A Disruptive TechnologyAnshdhaNANDRA1
Carbon Capture and Storage (CCS) stands as a disruptive force in the battle against climate change. This groundbreaking technology captures carbon dioxide emissions from industrial processes and power plants, averting their release into the atmosphere. Utilizing advanced capture methods such as chemical absorption and membrane separation, CCS presents a sustainable avenue for curbing greenhouse gas emissions. By securely storing the captured carbon underground, it ensures long-term environmental benefits. CCS heralds a new era in energy production and environmental stewardship, promising transformative solutions to mitigate the impacts of climate change.
The global demand for achieving the net zero emission target by 2050 has pushed governments all over to adapt and adopt advanced carbon removal technologies to go carbon negative.
It is, indeed, an important topic of discussion, because a carbon free environment is the need of the hour to save our planet. And, therefore, BIS Research is glad to announce its upcoming webinar on this particular subject.
Agenda:
The main agenda of this webinar is to understand and explore the following:
• Primary sources of carbon emissions and associated environmental issues
• Carbon dioxide removal – key technology and adoption scenario
• Carbon dioxide removal (CDR): trends and key market developments
• Carbon dioxide removal as a credible solution
• Conclusion and future outlook
The document summarizes a seminar on carbon trading to reduce emissions and mitigate climate change. Dr. V. Nepalia from the Department of Agronomy at RCA, Udaipur is the seminar in-charge. Mohammed Mohsin, a PhD scholar from the same department, will be the speaker. The seminar will cover global practices to reduce emissions, carbon trading through mechanisms like carbon markets and the Kyoto Protocol, carbon sellers and buyers, benefits of carbon trading, and India's carbon trading scenario. Carbon trading allows countries and companies to offset emissions by purchasing carbon credits from other entities with excess credits.
This document summarizes Pollutech Environmental Consultants' experience with a Clean Development Mechanism (CDM) project involving an anaerobic wastewater treatment system at a rum distillery in Nicaragua. The project would reduce greenhouse gas emissions by 192,000 tons of CO2 per year by treating wastewater anaerobically to produce biogas. It describes the CDM process, participants, financing organizations, and attributes such as enhancing project value through certified emission reductions but also complexity and risks.
The document discusses various measures and mechanisms within the Kyoto Protocol to reduce carbon emissions. It describes carbon credits which allow countries to produce a certain amount of emissions that can be traded if the full allowance is not used. It outlines mechanisms such as emissions trading, joint implementation, and the clean development mechanism which allow countries and organizations to meet emissions reduction requirements through projects in other countries. It also discusses monitoring of transactions and reporting of emissions inventories, as well as financing for adaptation projects in developing countries.
Carbon credits are reductions of greenhouse gas emissions, measured in tons of carbon dioxide, from projects that reduce emissions. They provide a way to reduce emissions on an industrial scale through trading. The Kyoto Protocol established mechanisms like Joint Implementation and the Clean Development Mechanism to generate carbon credits by financing emission reduction projects internationally. Credits can then be traded between countries and companies to help nations meet emissions targets cost effectively. However, some criticize that loopholes allow high emitting nations to avoid caps and question whether some offset projects deliver real reductions.
This document appears to be a capstone project submitted by Priyankur Dhar to the Institute for Technology and Management for a Post Graduate Diploma in Management between 2013-2015. The project is titled "A Study on Carbon Finance & Analysis on Carbon Credits (INDIA)". It includes sections on the introduction, literature review, carbon finance, analysis of data, conclusion, and recommendations. It also includes declarations by the student and faculty guide, acknowledgements, table of contents, and references. The project aims to study carbon finance and carbon credits markets in India through empirical analysis of relevant factors.
The document discusses Clean Development Mechanism (CDM) under the Kyoto Protocol and voluntary emission reduction (VER) projects. It provides an overview of the CDM project cycle and requirements, including developing project design documents, undergoing validation, registration, monitoring and verification to obtain certified emission reduction credits. It also summarizes the consultant's services around CDM/JI advisory, carbon footprinting, and developing projects to generate verified emission reductions under voluntary standards.
EIT RM Summit 2020, September 30 [CROCODILE]Jokin Hidalgo
The CROCODILE project will showcase innovative metallurgical systems based on advanced pyro-, hydro-, bio-, iono- and electrometallurgy technologies for the recovery of cobalt and the production of cobalt metal and upstream products from a wide variety of secondary and primary European resources. CROCODILE will demonstrate the synergetic approaches and the integration of the innovative metallurgical systems within existing recovery processes of cobalt from primary and secondary sources at different locations in Europe, to enhance their efficiency, improve their economic and environmental values, and will provide a zero-waste strategy for important waste streams rich in cobalt such as batteries.
Counting for Large Property Portfolios | Sean Lockie icarb
The document summarizes presentations given at the Westminster Carbon counting conference in 2008. It discusses the need for standards in carbon accounting, presents three case studies of carbon accounting projects, and describes Atkins' development of a carbon manual to standardize their carbon services.
Carbon credits represent the right to emit one tonne of carbon dioxide or its equivalent. They are part of national and international efforts to mitigate greenhouse gas emissions. Under emissions trading programs, emissions are capped and markets are used to allocate allowances among regulated groups. The goal is to use market mechanisms to encourage low-emissions approaches. Credits can also be voluntarily purchased to offset carbon footprints. Quality and prices vary depending on whether credits are from compliance markets or secondary markets.
Carbon credits represent the right to emit one tonne of carbon dioxide or its equivalent. They are part of national and international efforts to mitigate greenhouse gas emissions. Under emissions trading programs, emissions are capped and markets are used to allocate allowances among regulated groups. The goal is to use market mechanisms to encourage low-emissions approaches. Credits can also be voluntarily purchased to offset carbon footprints. Quality and prices vary depending on whether credits are from compliance markets or secondary markets.
Spectro provides critical environment cleaning and testing services for cleanrooms, datacenters, and manufacturing facilities. Their key services include particle count testing, HEPA/ULPA filter integrity testing, air velocity measurement, airborne particle classification testing, air exchange rate testing, microbial air sampling, and differential pressure, humidity, temperature, noise, and light intensity testing. Spectro uses the latest equipment and trained staff to adhere to industry standards and meet clients' critical environment needs.
More Related Content
Similar to Environmental testing laboratory in delhi india
Clean Development Mechanism (CDM) allows emission-reduction projects in developing countries to earn certified emission reduction (CER) credits, each equivalent to one tonne of CO2. The Kyoto Protocol established mechanisms for CDM. Projects go through validation, registration, verification and issuance of CERs. India has over 1,400 approved CDM projects expected to generate over 600 million CERs until 2012 across sectors like energy efficiency, renewable energy and waste management. Challenges include tapping potential from new sectors and developing large and programmatic CDM projects.
CDM-Process, Progress and challenges Indian PerspectiveNirav Modh
The Clean Development Mechanism (CDM) allows developing countries to earn certified emission reduction credits from greenhouse gas emission reduction projects that can be traded and sold to help industrialized countries meet emission reduction targets under the Kyoto Protocol. India has been very active in pursuing CDM projects, registering over 32% of total global CDM projects. However, Indian industries face challenges in fully adopting CDM projects due to lack of process driven development, low awareness, resistance to integrating CDM with main business operations, lack of policies and investment. The document then reviews the CDM project cycle and criteria for CDM project eligibility and design.
This presentation is about Clean Development Mechanism and focus is on power sector. key aspects covered are CDM world statistics, Indian scenario, CER prices, CDM project management, etc.
The purpose of the research was to determine the availability of alternative carbon revenue for renewable energy schemes in Zimbabwe taking Chipendeke Micro Hydro Scheme as a case study for the research. The research was based on how the Micro hydro power projects can benefit from the financing in terms of improved revenue provision as a source of income, it came up with the a comparison between carbon financed scheme and a non carbon financed scheme and explained how carbon finance affects the payback period of the project After analysis of the different carbon finance options available a design package of the carbon finance was done and it came up with the mechanism of carbon finance to be used, cost of project with and without carbon finance, how the carbon revenue would be used and the responsible parties for application and receipt of the funding.
This document provides an overview of international forest carbon markets and China's forest carbon sink potential. It discusses the background of carbon credit trading, types of carbon offset projects, international carbon standards (e.g. VCS, CCX, CAR), analyzes a case study of the CCX carbon market, and trends in the international carbon trading market. It also estimates China's potential to increase forest carbon sinks by 400 million hectares and 1.3 billion cubic meters of forest growth by 2020, absorbing approximately 2.4 billion tons of CO2.
An Analysis of Clean Development MechanismBaral Pradeep
The Clean Development Mechanism (CDM) allows developed countries to implement emissions reduction projects in developing countries and earn tradable carbon credits (CERs) for the reductions achieved. The CDM aims to help countries meet Kyoto targets while promoting sustainable development. Projects must demonstrate environmental additionality by proving reductions beyond business as usual. Registration and verification involve several steps overseen by Designated Operational Entities and the CDM Executive Board. Most CDM projects are in Asia focused on renewable energy and methane capture. However, the CDM faces challenges around additionality and local benefits. Recommendations include expanding demand for CERs and restricting supply to help address a market crash.
"Greenhouse Gas Protocol Corporate Standard, by World Resources Institute and World Business Council for Sustainable Development, March 2014." 2012, MIT.
Carbon Capture and Storage- A Disruptive TechnologyAnshdhaNANDRA1
Carbon Capture and Storage (CCS) stands as a disruptive force in the battle against climate change. This groundbreaking technology captures carbon dioxide emissions from industrial processes and power plants, averting their release into the atmosphere. Utilizing advanced capture methods such as chemical absorption and membrane separation, CCS presents a sustainable avenue for curbing greenhouse gas emissions. By securely storing the captured carbon underground, it ensures long-term environmental benefits. CCS heralds a new era in energy production and environmental stewardship, promising transformative solutions to mitigate the impacts of climate change.
The global demand for achieving the net zero emission target by 2050 has pushed governments all over to adapt and adopt advanced carbon removal technologies to go carbon negative.
It is, indeed, an important topic of discussion, because a carbon free environment is the need of the hour to save our planet. And, therefore, BIS Research is glad to announce its upcoming webinar on this particular subject.
Agenda:
The main agenda of this webinar is to understand and explore the following:
• Primary sources of carbon emissions and associated environmental issues
• Carbon dioxide removal – key technology and adoption scenario
• Carbon dioxide removal (CDR): trends and key market developments
• Carbon dioxide removal as a credible solution
• Conclusion and future outlook
The document summarizes a seminar on carbon trading to reduce emissions and mitigate climate change. Dr. V. Nepalia from the Department of Agronomy at RCA, Udaipur is the seminar in-charge. Mohammed Mohsin, a PhD scholar from the same department, will be the speaker. The seminar will cover global practices to reduce emissions, carbon trading through mechanisms like carbon markets and the Kyoto Protocol, carbon sellers and buyers, benefits of carbon trading, and India's carbon trading scenario. Carbon trading allows countries and companies to offset emissions by purchasing carbon credits from other entities with excess credits.
This document summarizes Pollutech Environmental Consultants' experience with a Clean Development Mechanism (CDM) project involving an anaerobic wastewater treatment system at a rum distillery in Nicaragua. The project would reduce greenhouse gas emissions by 192,000 tons of CO2 per year by treating wastewater anaerobically to produce biogas. It describes the CDM process, participants, financing organizations, and attributes such as enhancing project value through certified emission reductions but also complexity and risks.
The document discusses various measures and mechanisms within the Kyoto Protocol to reduce carbon emissions. It describes carbon credits which allow countries to produce a certain amount of emissions that can be traded if the full allowance is not used. It outlines mechanisms such as emissions trading, joint implementation, and the clean development mechanism which allow countries and organizations to meet emissions reduction requirements through projects in other countries. It also discusses monitoring of transactions and reporting of emissions inventories, as well as financing for adaptation projects in developing countries.
Carbon credits are reductions of greenhouse gas emissions, measured in tons of carbon dioxide, from projects that reduce emissions. They provide a way to reduce emissions on an industrial scale through trading. The Kyoto Protocol established mechanisms like Joint Implementation and the Clean Development Mechanism to generate carbon credits by financing emission reduction projects internationally. Credits can then be traded between countries and companies to help nations meet emissions targets cost effectively. However, some criticize that loopholes allow high emitting nations to avoid caps and question whether some offset projects deliver real reductions.
This document appears to be a capstone project submitted by Priyankur Dhar to the Institute for Technology and Management for a Post Graduate Diploma in Management between 2013-2015. The project is titled "A Study on Carbon Finance & Analysis on Carbon Credits (INDIA)". It includes sections on the introduction, literature review, carbon finance, analysis of data, conclusion, and recommendations. It also includes declarations by the student and faculty guide, acknowledgements, table of contents, and references. The project aims to study carbon finance and carbon credits markets in India through empirical analysis of relevant factors.
The document discusses Clean Development Mechanism (CDM) under the Kyoto Protocol and voluntary emission reduction (VER) projects. It provides an overview of the CDM project cycle and requirements, including developing project design documents, undergoing validation, registration, monitoring and verification to obtain certified emission reduction credits. It also summarizes the consultant's services around CDM/JI advisory, carbon footprinting, and developing projects to generate verified emission reductions under voluntary standards.
EIT RM Summit 2020, September 30 [CROCODILE]Jokin Hidalgo
The CROCODILE project will showcase innovative metallurgical systems based on advanced pyro-, hydro-, bio-, iono- and electrometallurgy technologies for the recovery of cobalt and the production of cobalt metal and upstream products from a wide variety of secondary and primary European resources. CROCODILE will demonstrate the synergetic approaches and the integration of the innovative metallurgical systems within existing recovery processes of cobalt from primary and secondary sources at different locations in Europe, to enhance their efficiency, improve their economic and environmental values, and will provide a zero-waste strategy for important waste streams rich in cobalt such as batteries.
Counting for Large Property Portfolios | Sean Lockie icarb
The document summarizes presentations given at the Westminster Carbon counting conference in 2008. It discusses the need for standards in carbon accounting, presents three case studies of carbon accounting projects, and describes Atkins' development of a carbon manual to standardize their carbon services.
Carbon credits represent the right to emit one tonne of carbon dioxide or its equivalent. They are part of national and international efforts to mitigate greenhouse gas emissions. Under emissions trading programs, emissions are capped and markets are used to allocate allowances among regulated groups. The goal is to use market mechanisms to encourage low-emissions approaches. Credits can also be voluntarily purchased to offset carbon footprints. Quality and prices vary depending on whether credits are from compliance markets or secondary markets.
Carbon credits represent the right to emit one tonne of carbon dioxide or its equivalent. They are part of national and international efforts to mitigate greenhouse gas emissions. Under emissions trading programs, emissions are capped and markets are used to allocate allowances among regulated groups. The goal is to use market mechanisms to encourage low-emissions approaches. Credits can also be voluntarily purchased to offset carbon footprints. Quality and prices vary depending on whether credits are from compliance markets or secondary markets.
Similar to Environmental testing laboratory in delhi india (20)
Spectro provides critical environment cleaning and testing services for cleanrooms, datacenters, and manufacturing facilities. Their key services include particle count testing, HEPA/ULPA filter integrity testing, air velocity measurement, airborne particle classification testing, air exchange rate testing, microbial air sampling, and differential pressure, humidity, temperature, noise, and light intensity testing. Spectro uses the latest equipment and trained staff to adhere to industry standards and meet clients' critical environment needs.
With a modest beginning in the year 1995, Spectro has grown steadily to become India's foremost Analytical Laboratory with 9 Branches/Joint Ventures in different parts of the country. It has also got Joint Venture laboratories abroad. Spectro is also involved in the field of providing Calibration services. It is the only lab in this part of the country having NABL Accreditation in Six fields i.e. Electrical Testing and Calibration for: Electro-Technical, Mechanical, Thermal, Chemical Testing, Mechanical Testing, Biological Testing, Non-Destructive Testing. Spectro also undertakes Third Party Inspection for Quality, Quantity & Packaging besides Pre-dispatch Shipment Inspections. It offers Consultancy Services for setting up of laboratory, ETP Designing & Maintenance, undertakes Environment, RLA, NDT and Failure Studies.
Take advantage of professional electrical testing services in Delhi at Spectro Analytical Labs Limited. The company has been offering top rated services to its customers for last two years and has made to the list of best electrical testing labs in Delhi. One of the best set-up electrical testing labs, they provide all types of advance testing services at an affordable price.
Building Materials Testing - Exclusive Services for Infrastructure / Civil Se...Spectro Group of Companies
Spectro Analytical Labs is pioneer in providing Material Testing, Inspection, Non Destructive analysis of various structures. Spectro provides reliable acerate & reproducible test results. The Analysis is conducted in compliance to various is standard including, IS, ASTM, BIS, ISO etc. Spectro owe its credibility to accreditation received from NABL & also a world - class sophisticates Laboratory.
Spectro has diversified its odyssey from testing, inspection and certification to the field of automation and research & development. our automation division is a technology solution provider wing in virtual and real word instrumentation domain. we have a well experienced research & Development team working on the development of testing instrumentation.
Spectro Analytical Labs Food Testing division is equipped to provide complete testing solution for a wide range of food products, be it raw or processed. Spectro Scrupulously follows the guidelines and mandatory requirements specified in ISO 17025 & Regularly Participates in Inter-laboratory comparison (ILC) Studies and proficiency testing (PT) programs. The Testing activities conducted at spectro are accomplished using various National and International Test methods such as IS, PFA AOAC, USFDA, PAM, BAM, EPA, etc. Recently Spectro has procured approval from the "Food Safety and Standards Authority of India” (FSSAI) Testing of Food Products entering into the Indian market.
Spectro Analytical Labs Ltd. is a full service forensic document laboratory with the goal of providing independent, objective, effective and reliable investigation to our esteemed clients or customers like bank corporation, insurance companies, educational institutions, law firms or individual clients etc.
The winter months of November and December 2015 show higher number of days in severe category-four times the safe standard - which is the worst category according to the National Air Quality Index. There has not been a single good air quality day this winter.
Particulate Matter and Indoor Air Quality
-----------------------------------------------------
While Delhi gets moving on its ambitious plan to restrain the number of passenger vehicles on its roads in a desperate bid to improve its air quality
Arsenic and Lead in your beauty products
-----------------------------------------------------
In a recent study, 12 brands each of lipstck, kajal, hair colour and nail polish were tested for the presence of heavy metals – namely lead and arsenic.
The Food Safety and Standards Authority of India (FSSAI) has finalized 12,000 standards for food additives and ingredients in order to do away with the current lengthy process of product approval...
It is good that deadly air pollution in Delhi has become national headline. But it is awful that we are failing to deal with it and find answers that are proportionate with the scale of the problem.
SLE has propitiously completed a Project for setting up of Laboratory for Cement Plant in Central India. An entire array of services was provided with world class quality.
www.spectrolabequipments.com
Coconut oil is 100 per cent fat and is esponsible for several heart problems. Though research in humans has been remarkably limited, the saturated fats in coconut oil appear to be more neutral in their effect on blood cholesterol than that in meat. Saturated fats increase the Low Density Lipoprotein (bad) cholesterol, but they differ in chemical structure.
The newsletter discusses Spectro Group of Companies, a testing and calibration organization in India that has grown to over 500 employees with 12 branches over 20 years. It provides an overview of Spectro's services such as environmental monitoring and testing, non-destructive testing of concrete structures, and technical capabilities like X-ray fluorescence. The newsletter also highlights Spectro completing 20 years in business and expanding into new areas while maintaining high standards of excellence.
In order to keep our esteemed customers updated with the latest technical advancements, we are launching our
monthly Newsletter. The Newsletter is especially designed to showcase informative articles and our distinguished activities.
The document is a newsletter from Spectro Group, a company that provides testing, calibration, training, inspection, R&D, and other services. The newsletter discusses electronic waste (e-waste) and how it contains precious metals like gold, silver, and palladium that can be recovered through recycling. It also summarizes Spectro's capabilities in analyzing e-waste to extract these precious metals. The newsletter provides additional details on Spectro's services and facilities.
The newsletter discusses air pollution in India and its health impacts. It provides an overview of Spectro Group of Companies, which includes analytical labs, equipment manufacturing, and training institutes. The company offers services like environmental monitoring, indoor air quality testing, and cyclic corrosion testing. Spectro has the capabilities for accurate mycotoxin analysis in food using LC-MS/MS and manufactures portable particulate monitors.
We are happy to share with you, our monthly News letter “Tech-Talk” which is designed tobe an emental source for leading information related to developing technologies, ingenious techniques and innovative approaches.
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
Climate Change All over the World .pptxsairaanwer024
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.tiwarimanvi3129
This presentation is for us to know that how our Environment need Attention for protection of our natural resources which are depleted day by day that's why we need to take time and shift our attention to renewable energy sources instead of non-renewable sources which are better and Eco-friendly for our environment. these renewable energy sources are so helpful for our planet and for every living organism which depends on environment.
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Epcon is One of the World's leading Manufacturing Companies.EpconLP
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...Joshua Orris
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
How about Huawei mobile phone-www.cfye-commerce.shop
Environmental testing laboratory in delhi india
1. CLEAN DEVELOPMENT
MECHANISM
(CDM)
SPECTRO ANALYTICAL LABS LTD is one of the leading laboratories in India, also offering a wide range of
Integrated Solutions in various Environmental Sectors. CDM is one area where SPECTRO offers its elite
services.
Services offered under CDM:
Clean Development Mechanism (CDM): An arrangement under the
Kyoto Protocol that allows Real, Measurable and Long Term
bene its in forms of CER's (Carbon Emission Reductions)/Carbon
Credits , or reductions that are additional.
Ø Carbon Trading Solutions
Ø Consultancy in CDM Projects of various sectors
Ø Designing of Project Design Documents (PDD's) as per UNFCCC Guidelines
Ø Development of Methodologies for Baseline Establishment of a project
Ø Facilitation of approval by Host Country's Designated National Authority
Ø Facilitation of identi ication of DOE for Validation, Veri ication and Monitoring purposes along with
registration with UNFCCC
Ø Facilitation of suitable buyers of CER's and VER's
Present day scenario reveals that human activities like Industrialization,
Transportation, Waste Generation, Mining, Agriculture etc. have lead to the
emission of toxic gases called Green House Gases (GHG' s) such as CO N O, SF ,
HFC's and PFC's into the atmosphere leading to GLOBAL WARMING.
CO being the most dangerous of all, has been increasing one's CARBON
FOOTPRINT constantly. Sustainable Development needs to be achieved so,
therefore CDM, was introduced in Kyoto (Japan), in 1997, with an objective to
achieve Sustainable Development.
2, 2 6
We have specialized in handling CDM projects in various sectors in accordance with latest UNFCCC
guidelines. Some of these projects include:
Ø Waste Heat Recovery (WHR) Project of 6 MW capacity Cement Plant in Tamil Nadu
Ø Waste Heat Recovery Project of 10 MW capacity Coke Oven Unit in Jamshedpur (Jharkhand)
Ø Waste Heat Recovery Project of 20 MW capacity Sponge Iron Unit in Raipur (Chhatisgarh)
Ø Establishing a Captive Power Project (CPP) for a Cluster of Dyeing Units in Textile Industry
Ø Establishing a Captive Power Project (CPP) for a Cluster of Looms in Textile Industry
Ø Wind Energy Project
Ø Solar Power Project
2
CLEAN DEVELOPMENT
MECHANISM
(CDM)
4. We offer Integrated Solutions in Clean Technologies which
are consequents of CDM. Some of them include:
Ø GREEN BUILDINGS
Ø CLEAN FUELS
Ø CFL's, SOLAR HEATERS
Ø WIND TURBINES
Ø SOLAR PANELS to capture and store heat from Sun's rays
Ø 3 R's- Reduce, Reduse, Recycle
SPECTRO- “AN ENERGY SAVING COMPANY (ESCO)”
SPECTRO, in association with RENCO TECHNOLOGIES PVT LTD, has introduced a concept
of “ESCO” Model. It has been seen that many industrialists are willing to reduce their
energy consumption but at the same time are reluctant to put in investments in capital
equipments.
“ESCO” Model offers a concept such that both the Technology Provider and the End User
come up with a win-win situation where both of them can simultaneously bene it from the
revenue generated from “Carbon Credits” and Energy Savings, which helps to reduce the
inancial liability.
5. ACCREDITATIONS/CERTIFICATIONS/RECOGNITIONS/APPROVALS
— NABL per ISO-17025
— ISO per 9001 - 2000
— Ministry of Environment & Forest
— State Pollution Control Boards (Haryana, HP, Orissa)
— NPC (Environment Division)
— WAPCOS
— Bureau of Indian Standards
— R I T E S
— Rail Tel corporation of India
— Airports Authority of India
— Director General of Civil Aviation
— Delhi Metro Rail Corporation Ltd
— R. D. S.O
— World Food Programme
— Bureau Veritas
— D G S&D
— G A I L
— Ministry of Defense
We offer lexibility to our clients through “ESCO” by forming a SPV (Special Purpose
Vehicle). SPV is a Joint Venture comprising a structure where the Project Developer,
Finance Provider and the Service & Technology Provider has a commensurate stake
in the revenue generated from the project and therefore maintaining equilibrium
throughout.
6. E-41 Okhla Industrial Area
Phase-II
New Delhi-110020
Ph:- 91 11 40522000, 41611000
E-mail: care@spectro.in
URL:- www.spectrogroup.com
www.spectro.in
Head office Corporate office
S-1 GNEPIP, Surajpur Industrial Area
Kasna, Greater Noida, Phase-V
Gautam Budha Nagar (U.P.)
Pin Code: 201308
Ph:- 0120-2341251/52
E-mail:- care@spectrogroup.com
URL:- www.spectrogroup.com2017
CIN : U74220DL1998PL C092698
Ü Metals& Alloys
Ü NonDestructiveTesting
Ü Rubber& Polymers
Ü FoodandAgroProducts
Ü Coal,SolidFuels& Petroleum
Ü Electrical & Electronics
Ü Pharmaceuticals& Drugs
Ü BuildingMaterials
Ü Minerals& Chemicals
Ü Leather& Textiles
Ü Water& Environment
Ü Paper& PackagingMaterials
Ü HazardousSubstances
Ü CleanRoom Validation
Major Ac vi es
Testing
Calibration
Training
Inspection
R&D
Automation
Reverse
Engineering