The document outlines various electrical testing services accredited by NABL, including tests for cables, water purifiers, electric appliances, automobile components, and energy meters. It details specific tests, procedures, applicable standards, and ranges for each category. Additionally, it mentions facilities for energy audits and equipment health monitoring.

1. Electrical Testing
ISO 17025 (NABL Accredited)

2. Electrical Endurance Testing
1. a. PVC Insulated Cables(1100 V) Annealing Test(Cu) Upto 50 kN
IS:694-2010 (NABL Appd.) Tensile Test(Al) Upto 50 kN
Wrapping Test(Al) Visual
Conductor Resistance Test 11Ω
Test For Overall Dimensions 25 mm,200 mm
Ageing In oven (200°C,0-5 kN)
Shrinkage Tests (200 mm,Upto 200°C)
Hot Deformation Test Upto 200°C
Loss Of Mass In Air Oven (200°C,200g)
Heat Shock Tests Upto 200°C
Insulation Resistance Test Upto 100X 10 MΩ
High Voltage(Water
Immersion Test) (10 kV A.C,100°C)
High Voltage(Water
Immersion Test) (10 kV D.C,100°C)
b. Cross Linked Polyethylene Insulat
-ed PVC Sheathed Cables: Part 1 Same As Above Same As above
For Working Voltage And 1100V
IS: 7098(P-1) 1988 (NABL Appd.)
c. Aluminum Conductors For Diameter Of Al Upto 25 mm
Overhead Transmission Purposes Conductivity Resistence20°C 11 Ω
IS :398 (P-2: 1996) (NABL Appd.) Breaking Load Upto 50 kN
Ductility Test 0- 50kN
Elongation 0- 500kN
Galvanizing Test 0-200g
d. Aluminum Conductors For Stranding Visual
Overhead Transmission Purposes Lay Ratio 0.5 mm
IS: 398:1994 (NABL Appd.)
2. Water Purier Leakage Current Test 2000μA
IS :14724-1999 (NABL Appd.) High Voltage Test 0- 5kV
Earthing Connection (50A ,20 V)
3. Electric Iron Rating Visual
IS:366-1991(NABL Appd.) Measurement Of Heating Time 400°C
Measurement Of Sole Plate 400°C
Protection Against Shocks 0- 75 V
Power Input And Current 5 kW
4. Electric Immersion water Heater Same As Above Same Ranges
IS:368-1982 (NABL Appd.)
5. Switches (Domestic Purpose) Insulation Resistence Test Visual
IS:3854:1997 (NABL Appd.) Resistence To Rusting Visual
Protection Against Shocks 0-75 V
6. Automobile/ Electronic
Components Testing Heat Resistance Test 30 to 250ºC
JIS, JASSO, IEC-60068, Tata Cold Resistance Test -80 to 27ºC
Standard, Maruti Standard Thermal Cycle Test -40 to 180ºC
and IS:10250 Thermal Shock Test -80 to 180ºC
Damp Heat Test 99.9% R.H
Product Description &
Applicable Standard
Test Performed Range
9
We provide complete testing of electrical and electronic products. This ensures customers are
able to comply with the widest range of international standards and end user requirements.
Parameters

3. ASTM B117, ISO:9227, JIS:J2371, Salt Spray Test 5% NaCL
IS:5528
IS & IEC Standard Insulator Testing
NFC Standard Piercing Connector Testing
IS & NFC Standard Overhead Wire Fitting Testing
IS Drop Out Fuse Testing
IS Fuse Wire Testing
7. Power Generation & Distribution
System Testing
a. Current Transformers Testing Determination of Error 5A to 2000A
IS:2705-1992, IEC:60044-1-2003 measurement of winding 1mΩ to 20 kΩ
Resistance
Temperature Rise test 2400A 0-200 Temp.
High Voltage Power 3kV
Frequency Test
Verication of terminal –
Marking and polarity
Accuracy Limit Factor 30
Composite Error Measurement 15%
b. Energy Meters Single Phase Energy Meter
Ω
IS:10250
240 V , 1-5 Amp
ICBIP-88 (Feb 2002), IS:13779:1999 Three Phase Energy Meter 5Wh to 100 kWh
IS:14697:1999, IEC:62052-11-2003
c. Breakers
d. Relays
IEC:60255-5 Insulation Resistance Test 100M
Humidity Test 99.9%
8. Energy Efciency & Performance
Testing
IS:15750 Frost Free Refrigerator Test
AS/NZS:4474.1 & AS/NZS 4474.2/ Direct Cool Refrigerator Testing
IS:1476
IEC 62301 Ed. 1.0 & IEC 62087 Colour Television Test
IS 14155 & IEC 60456 Washing Machine Test
IS 1391 Part 1 & Part 2 Air Conditioner Testing
IS 12615:201, IS 4029 -1967, Induction Motor Testing
IS 325:1996
IS 2418 (Part I), (Part II), (Part III) Tubular Fluorescent
& Part(IV) - 1977 Lamp Testing
IS 14220:1994, IS 8034 : 2002, Agricultural Pump Sets
IS 9079 : 2002, IS 11346: 2004
S 374 :1979 Ceiling Fans Test
IS 2082:1993; IS 302-2-21 Water Heaters/
Electric Geysers Test
IS 4246 : 2002 Liqueed Petroleum Gas Stoves
Product Description &
Applicable Standard
Test Performed Range

4. 9. Equipment Health Monitoring & Cables
Services Turbines
Transformers
Generators
Motors
10.Energy Audits
We Perform On Site Audits for Energy.
Salt Spray Chamber
Thermal Shock Chamber
Climate Temperature System
Humidity Chamber
Oven
Deep Freezer
Million Megaohm meter
Iron Temperature Setting
Kelvin Double Bridge
Conductivity Meter
AC/DC High Voltage Tester
Water Bath
Multi Test Panel
Electrical Testing
List of Major Equipments
Product Description &
Applicable Standard
Test Performed Range

5. E-41 Okhla Industrial Area
Phase-II
New Delhi-110020
Ph:- 91 11 40522000, 41611000
E-mail: care@spectro.in
URL:- www.spectrogroup.com
www.spectro.in
Head Office Corporate office
S-1 GNEPIP, Surajpur Industrial Area
Kasna, Greater Noida, Phase-V
Gautam Budha Nagar (U.P.)
Pin Code: 201308
Ph:- 0120-2341251/52
E-mail:- care@spectrogroup.com
URL:- www.spectrogroup.com2017
Major Ac vi es
Testing
Calibration
Training
Inspection
R&D
Automation
Reverse
Engineering
Ü Metals& Alloys
Ü NonDestructiveTesting
Ü Rubber& Polymers
Ü FoodandAgroProducts
Ü Coal,SolidFuels& Petroleum
Ü Electrical & Electronics
Ü Pharmaceuticals& Drugs
Ü BuildingMaterials
Ü Minerals& Chemicals
Ü Leather& Textiles
Ü Water& Environment
Ü Paper& PackagingMaterials
Ü HazardousSubstances
Ü CleanRoom Validation
CIN : U74220DL1998PL C092698