This document summarizes a study that cultivated the microalgae Chlorella vulgaris in liquor from chemically treated sewage sludge to produce biomass for anaerobic digestion and energy generation. Four types of sludge liquor media were tested: a control with polyelectrolyte (sample 1), two with different lime concentrations (samples 2 and 3), and one with ferric chloride (sample 4). C. vulgaris grew best in sample 1 liquor, producing 1.36 kg/m3 of biomass and providing the highest estimated energy generation of 3.07 kWh and economic value of £1.12 per cubic meter after anaerobic digestion. Samples 2 and 3 performed similarly while sample 4 supported
ER Publication,
IJETR, IJMCTR,
Journals,
International Journals,
High Impact Journals,
Monthly Journal,
Good quality Journals,
Research,
Research Papers,
Research Article,
Free Journals, Open access Journals,
erpublication.org,
Engineering Journal,
Science Journals,
Use of Microalgae for Phycoremdiation & biodiseal productioniqraakbar8
Several wastewater treatment methods are available.
But, they are not feasible for certain nutrients removal.
Considering these issues, microalgae is best alternate approach.
Photosynthetic , and accumulative capabilities of microalgae are making it especially attractive.
waste water treatment through Algae and Cyanobacteriaiqraakbar8
Use of algae in wastewater treatment. Recently, algae have become significant organisms for biological purification of wastewater since they are able to accumulate plant nutrients, heavy metals, pesticides, organic and inorganic toxic substances and radioactive matters in their cells/bodies.
Isolation and Screening of Hydrogen Producing Bacterial Strain from Sugarcane...Editor IJCATR
The aim of this study is to isolate a highly competent bacterium with potent cellulose degrading capability and a better
hydrogen producer. Soil sample from sugarcane bagasse yard was isolated, serially diluted and plated on cellulose specific nutrient
agar plate. Four colonies have been isolated in which a single colony has potent cellulose degrading ability and the highest hydrogen
productivity of 275.13 mL H2 L-1. The newly isolated bacterium was morphologically and biochemically characterized. The
molecular characterization of the bacterium was carried out using 16S rDNA sequencing and the organism was identified as
Bacilllus subtilis AuChE413. Proteomic analysis such as MALDI-TOF was carried out to differentiate the isolated Bacillus subtilis
from Bacillus thuringiensis and Bacillus amyloliquefaciens. Phylogenetic tree was constructed to analyze the evolutionary
relationship among different genus and species with the newly isolated strain.
ER Publication,
IJETR, IJMCTR,
Journals,
International Journals,
High Impact Journals,
Monthly Journal,
Good quality Journals,
Research,
Research Papers,
Research Article,
Free Journals, Open access Journals,
erpublication.org,
Engineering Journal,
Science Journals,
Use of Microalgae for Phycoremdiation & biodiseal productioniqraakbar8
Several wastewater treatment methods are available.
But, they are not feasible for certain nutrients removal.
Considering these issues, microalgae is best alternate approach.
Photosynthetic , and accumulative capabilities of microalgae are making it especially attractive.
waste water treatment through Algae and Cyanobacteriaiqraakbar8
Use of algae in wastewater treatment. Recently, algae have become significant organisms for biological purification of wastewater since they are able to accumulate plant nutrients, heavy metals, pesticides, organic and inorganic toxic substances and radioactive matters in their cells/bodies.
Isolation and Screening of Hydrogen Producing Bacterial Strain from Sugarcane...Editor IJCATR
The aim of this study is to isolate a highly competent bacterium with potent cellulose degrading capability and a better
hydrogen producer. Soil sample from sugarcane bagasse yard was isolated, serially diluted and plated on cellulose specific nutrient
agar plate. Four colonies have been isolated in which a single colony has potent cellulose degrading ability and the highest hydrogen
productivity of 275.13 mL H2 L-1. The newly isolated bacterium was morphologically and biochemically characterized. The
molecular characterization of the bacterium was carried out using 16S rDNA sequencing and the organism was identified as
Bacilllus subtilis AuChE413. Proteomic analysis such as MALDI-TOF was carried out to differentiate the isolated Bacillus subtilis
from Bacillus thuringiensis and Bacillus amyloliquefaciens. Phylogenetic tree was constructed to analyze the evolutionary
relationship among different genus and species with the newly isolated strain.
ER Publication,
IJETR, IJMCTR,
Journals,
International Journals,
High Impact Journals,
Monthly Journal,
Good quality Journals,
Research,
Research Papers,
Research Article,
Free Journals, Open access Journals,
erpublication.org,
Engineering Journal,
Science Journals,
Mixotrophic Cultivation of Botryococcus Braunii for Biomass and Lipid Yields ...IJERA Editor
In the present study an attempt has been made to utilize glucose as a carbon source to cultivate Botyrococcusbrauniimixotrophically with CO2 inputs to achieve biomass and lipid yields along with CO2 reduction. Experiments were carried out in laboratory culture flasks using different glucose concentrations (1g/L, 1.5g/L, 2g/L, 2.5g/L, 3g/L, 3.5g/L, 4g/L, 4.5g/L and 5g/L) with 6% CO2 inputs at a flow rate of 0.1vvm at different time intervals of CO2 aeration (1hr/d, 2hr/d, 4hr/d, 6hr/d, 8hr/d, 10h/d, 12h/d and 24hr/d). The maximum biomass and lipid yields of 2.43g/L and 1.29g/L respectively were obtained at the glucose concentration of 2.5g/L. On the other hand the CO2 removal efficiency reached upto 75%. Hence in the present study it was observed that the microalgaeB. bauniigrew efficiently in the mixotrophic cultivation mode utilizing the glucose and CO2 as carbon source for its growth to achieve CO2reduction and in turn it produced biomass and lipids yields efficiently.
This Slide is made from most efficient Research Paper of world. This is combination of more than 8 Research paper. It may be helps you to increase your knowledge. In this slide we will be try to discuss about waste water treatment & we also discuss how to improve This treatment process. Thank you.
Oleaginous fungal lipid fermentation on combined acid and alkali-pretreated ...zhenhua82
A combined hydrolysis process, which first mixed dilute acid- and alkali-pretreated corn stover at a 1:1 (w/w) ratio, directly followed by enzymatic saccharification without pH adjustment, has been developed in this study in order to minimize the need of neutralization, detoxification, and washing during the process of lignocellulosic biofuel production. The oleaginous fungus Mortierella isabellina was selected and applied to the combined hydrolysate as well as a synthetic medium to compare fungal lipid accumulation and biodiesel production in both shake flask and 7.5 L fermentor. Fungal cultivation on combined hydrolysate exhibited comparable cell mass and lipid yield with those from synthetic medium, indicating that the integration of combined hydrolysis with oleaginous fungal lipid fermentation has great potential to improve performance of advanced lignocellulosic biofuel production
Abideen Adeyinka Adekanmi, Adeniyi Sheriffdeen Adekanmi and Uthman Taiwo Adekanmi “Biotreatment of Slaughterhouse Waste Water by Microalgae” United International Journal for Research & Technology (UIJRT), Volume 01, Issue 09, pp. 19-30, 2020. https://uijrt.com/articles/v1i9/UIJRTV1I90003.pdf
Bioremediation of wastewater by microorganismsadetunjiEwa
ABSTRACT
The term bioremediation has been introduced to describe the process of using biological
agents to remove toxic waste from environment. Bioremediation is the most effective management tool to manage the polluted water and recover contaminated waste water. It is an attractive and successful cleaning technique for polluted environment; it has been used at a number of sites worldwide, with varying degrees of success.
ER Publication,
IJETR, IJMCTR,
Journals,
International Journals,
High Impact Journals,
Monthly Journal,
Good quality Journals,
Research,
Research Papers,
Research Article,
Free Journals, Open access Journals,
erpublication.org,
Engineering Journal,
Science Journals,
Mixotrophic Cultivation of Botryococcus Braunii for Biomass and Lipid Yields ...IJERA Editor
In the present study an attempt has been made to utilize glucose as a carbon source to cultivate Botyrococcusbrauniimixotrophically with CO2 inputs to achieve biomass and lipid yields along with CO2 reduction. Experiments were carried out in laboratory culture flasks using different glucose concentrations (1g/L, 1.5g/L, 2g/L, 2.5g/L, 3g/L, 3.5g/L, 4g/L, 4.5g/L and 5g/L) with 6% CO2 inputs at a flow rate of 0.1vvm at different time intervals of CO2 aeration (1hr/d, 2hr/d, 4hr/d, 6hr/d, 8hr/d, 10h/d, 12h/d and 24hr/d). The maximum biomass and lipid yields of 2.43g/L and 1.29g/L respectively were obtained at the glucose concentration of 2.5g/L. On the other hand the CO2 removal efficiency reached upto 75%. Hence in the present study it was observed that the microalgaeB. bauniigrew efficiently in the mixotrophic cultivation mode utilizing the glucose and CO2 as carbon source for its growth to achieve CO2reduction and in turn it produced biomass and lipids yields efficiently.
This Slide is made from most efficient Research Paper of world. This is combination of more than 8 Research paper. It may be helps you to increase your knowledge. In this slide we will be try to discuss about waste water treatment & we also discuss how to improve This treatment process. Thank you.
Oleaginous fungal lipid fermentation on combined acid and alkali-pretreated ...zhenhua82
A combined hydrolysis process, which first mixed dilute acid- and alkali-pretreated corn stover at a 1:1 (w/w) ratio, directly followed by enzymatic saccharification without pH adjustment, has been developed in this study in order to minimize the need of neutralization, detoxification, and washing during the process of lignocellulosic biofuel production. The oleaginous fungus Mortierella isabellina was selected and applied to the combined hydrolysate as well as a synthetic medium to compare fungal lipid accumulation and biodiesel production in both shake flask and 7.5 L fermentor. Fungal cultivation on combined hydrolysate exhibited comparable cell mass and lipid yield with those from synthetic medium, indicating that the integration of combined hydrolysis with oleaginous fungal lipid fermentation has great potential to improve performance of advanced lignocellulosic biofuel production
Abideen Adeyinka Adekanmi, Adeniyi Sheriffdeen Adekanmi and Uthman Taiwo Adekanmi “Biotreatment of Slaughterhouse Waste Water by Microalgae” United International Journal for Research & Technology (UIJRT), Volume 01, Issue 09, pp. 19-30, 2020. https://uijrt.com/articles/v1i9/UIJRTV1I90003.pdf
Bioremediation of wastewater by microorganismsadetunjiEwa
ABSTRACT
The term bioremediation has been introduced to describe the process of using biological
agents to remove toxic waste from environment. Bioremediation is the most effective management tool to manage the polluted water and recover contaminated waste water. It is an attractive and successful cleaning technique for polluted environment; it has been used at a number of sites worldwide, with varying degrees of success.
Réforme du Paysage de votre commune - synthèse d'enquête - février 2016Pascal Maurand
L’année 2015 a été une année de transition pour le Paysage de votre commune.
Un nouvel angle d’attaque, des nouvelles catégories, des nouveaux intitulés…
Toutes ces modifications ont vu le jour l'année passée,et il était important pour nous d’avoir le retour des acteurs du réseau Paysage de votre commune sur ces nouveaux éléments de langage.
Pour cela, nous avons effectué une enquête de satisfaction auprès d’environ 120 acteurs du réseau au mois de décembre. 54 personnes ont répondu à ces quelques questions.
Et voici les principaux résultats à retenir.
en savoir+ : http://www.caue85.com/-paysage-de-votre-commune-.html
The concept of work-life balance today is obsolete. This conference took a deeper look at people, projects, products, and services that we can all leverage to try to LIVE, WORK, and PLAY BETTER.
International Journal of Engineering and Science Invention (IJESI) inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online
CULTIVATION OF OSCILLATORIA SP IN DAIRY WASTE WATER IN TWO STAGE PHOTO BIOREA...civej
This paper presents an integrated approach to cultivate microalgae in dairy wastewater and to
investigate the capability of the organism for biodiesel production. The present study was carried out
using tolerant strains of microalgae collected from dairy effluent treatment plant, Kochi. Selected blue
green algal strains were mass cultured in the laboratory and acclimatized using different concentrations
of synthetic effluent. Blue green algal filaments were immobilized inside the primary and secondary
photobioreactors. The experiment was conducted in two stages including batch and continuous
treatment. The stage 1 of the experiment was designed for the reduction of physical impurities and the
nutrients. Stage 2 was designed mainly for the cultivation of blue green algae in dairy waste water by
utilizing the extra nutrients . Reduction of 94 -99.5% in phosphate was observed after 48 h of treatment
in the primary and secondary photobioreactors. The level of phosphate, total hardness, ammoniacal
nitrogen in the MSE was reduced by 97%,93 %, 81% respectively. BOD was reduced to 370mg L-1 from
1500 mg L-1 after 48 hrs of treatment in the primary reactor. COD was reduced to 85 mg L -1 from an
initial value of 1500 mg L -1 from medium strength effluent (MSE) and 90-95 % removal of COD was
also obtained from high strength effluent(HSE) during the study period. Biomass developed within the
reactor was harvested at every 15 days intervals from the secondary reactor and analyzed for lipids and
fattyacids. Presence of C14:0, C16:0,C18:0, C18:1 and C18:2 fatty acids strongly supports its abilility for
biodiesel production.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Distillery Wastewater: it's Impact on Environment and Remedies_ Crimson Publi...CrimsonpublishersEAES
Distillery Wastewater: it's Impact on Environment and Remedies by Pankaj Chowdhary, Nawaz Khan and Ram Naresh Bharagava* in Environmental Analysis & Ecology Studies
Biogas Synthesis as Means of Solid Waste Management in Kampala, UgandaScientific Review SR
Cattle dung, cooked food waste, and chicken droppings mixed with coffee husks have been used separately and also as mixtures to form anaerobic digestion slurries in a bid to treat to degrade the organic fractions of these wastes and recycle the bio-fertilizer after recovering biogas. Single and mixed substrate slurries evolved significant quantities of methane within 27days together with reduced mass of soil conditioner. The volume of biogas formed in cogeneration mixtures were higher than for single substrate digestion due to the C/N ratio shifting to near 30:1 as a result of mixing. So degradation of organic pollutants was higher in mixed substrate digestion mixtures. Our study yielded average volumes ranging from 315 to 435+ 5.65.mL/L which was in agreement with what is in literature. Digestion of cattle dung, cooked waste foods, and droppings of chicken and mixed substrate slurries using sludge inoculums was very effective in degrading solid waste from homes, thus detoxifying it to bio-fertilizers. Although both single and mixed substrate digestion of waste yielded high enough volumes of biogas; digestion of slurry of mixed organic solid waste substrates is better method of waste management. Digestion of garbage from Kampala should be tested at macro levels at both ambient and mesophilic temperatures. There is need to try out the garbage digestion experiments in the semi-arid towns as well as very cold towns in Uganda.
Impact of Improved Aeration on Decomposition Rate of Enriched Compostijtsrd
Agricultural activities tend to generate a substantial volume of animal and crop residues. Composting is the most economical and ecologically sustainable option to manage farmyard waste. However, it takes approximately three months to complete decomposition and contains lower plant nutrient percentages than inorganic fertilisers. This study aimed to reduce the decomposition time and improve the nutrient content of compost. Aerobic decomposition was enhanced by aeration inside the pile using a blower with 0.5 l min kg airflow. Paddy straw, poultry manure, goat manure, cattle manure and paddy husk ash were mixed in 3 1 1 1 1 ratio respectively as the raw materials and 3 of Eppawala Rock Phosphate was added to the mixture in weight basis. Six piles 150 X 100 X 80 cm were prepared, and three piles were aerated for six hours per day while other three piles were left to decompose under the ambient condition as the control. According to the results, aerated and control piles took 35 days and 65 days to complete the decomposition. Total N, available P, exchangeable K, C N ratio, pH, EC and CEC were analysed in compost samples from aerated after 35 days and controls, and the results were, 20.5 g kg 1, 1.8 g kg 1, 10.4 g kg 1, 7, 8.8, 4.3 mS cm 1, 19.3 cmol kg 1 and 17.8 g kg 1, 1.5 g kg 1, 9.9 g kg 1, 8.5, 8.8, 3.64 mS cm 1, 21.3 cmol kg 1 respectively. Data were analysed using SAS 9.0 software with a 95 confidence interval. The results revealed a significant increment in total N, exchangeable K, C N ratio, EC and CEC in aerated piles compared to controls. And the nutrient composition of both methods was significantly higher than the commercial compost. Therefore, it can be concluded that decomposition time can be effectively reduced and the nutrient level can be increased by artificial aeration and nutrient enrichment, respectively. However, further studies are recommended to study the economic feasibility. D. M. S. H. Dissanayaka | V. P. T. Dhananjaya | E. J. Kosgollegedara | S. Karthigayini "Impact of Improved Aeration on Decomposition Rate of Enriched Compost" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38557.pdf Paper Url: https://www.ijtsrd.com/engineering/agricultural-engineering/38557/impact-of-improved-aeration-on-decomposition-rate-of-enriched-compost/d-m-s-h-dissanayaka
High Rate of Water Biodenitrification Using Anthracite as Hyphomicrobium Deni...theijes
Pure culture of Hyphomicrobium denitrificans DSM 1869 was immobilized on anthracite and utilized for biological denitrification in 50-ml flasks employing methanol and acetic acid as carbon source. The results demonstrate that acetic acid was a suitable carbon source for H. denitrificans to remove high nitrate concentrations. The maximum denitrification rate was 233.1 mg NO3-N/g MLSS.h and the highest NO3-N removal efficiency was obtained when using C/N ratio of 4.0 and acetic acid as the carbon source. C/N ratio can significantly affect denitrification in different operational conditions. The low C/N ratios did not allow the denitrification process to be completed in case of high NO3-Nconcentrations. High C/N ratio increased the rate of nitrate conversion when using acetic acid as a carbon source; but added a pollutant to denitrified water when using methanol as a carbon source. The results demonstrated that H. denitrificans was a suitable bacterium for denitrifying high NO3-N concentrations.
Research Inventy : International Journal of Engineering and Scienceinventy
Research Inventy : International Journal of Engineering and Science
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed
The Effluent Quality Discharged and Its Impacts on the Receiving Environment ...Agriculture Journal IJOEAR
The study evaluates the performance of Kacyiru Sewage Treatment Plant and its effluent impacts on the receiving wetland. Influent and effluent wastewaters as well as receiving wetland water qualities were measured from April to September 2019, at Kacyiru estate. The average removal efficiency (%) of the parameters such as TN, TP, COD, BOD 5 were recorded as 46.57; 61.49; 50.51; 66.79 respectively. The parameters such as pH, TDS, temperature value, were recorded within the prescribed limit of Rwanda standards for domestic wastewater discharge. The other parameters such as NTU, TN, TP, TSS, BOD 5 and Fecal coliforms were not complying with National standards requirements for domestic wastewater discharge. The finding showed that the excess nutrient observed may present potential sources of pollution in wetland and decrease the oxygen levels which affect the water living organisms. The discharged effluents contain microbes which can negatively devastate the receiving environment, thus the effect of discharged wastewater on environment is significant.
The Effluent Quality Discharged and Its Impacts on the Receiving Environment ...
Energy paper IJTR
1. International Journal of Technical Research and Applications e-ISSN: 2320-8163,
www.ijtra.com Special Issue 32 (September, 2015), PP. 49-54
49 | P a g e
ENERGY AND REVENUE CREATION FROM
THE ANAEROBIC DIGESTION OF CHLORELLA
VULGARIS CULTIVATED IN LIQUOR FROM
CHEMICALLY TREATED SEWAGE SLUDGE.
Okoro-Shekwaga Cynthia Kusin1
, Nigel Horan2
1
Agricultural and Bioresources Engineering Federal University of Technology, Minna Niger State Nigeria.
2
Public Health Engineering, School of Civil Engineering, University of Leeds, Leeds United Kingdom
1
cynthia.okoro@futminna.edu.ng, 2
n.j.horan@leeds.ac.uk
Abstract— Microalgae are a good alternative to fossil fuel for
energy generation. Chlorella vulgaris (C.vulgaris) strain of the
microalgae was cultivated on liquor from chemically treated
sewage sludge samples, to estimate the economic worth of sludge
liquor; from the anaerobic digestion of the generated biomass.
Sample1 was conditioned with zetag66 polyelectrolyte (control
sample), samples 2 and 3 were treated with lime at different
concentrations and sample 4 was treated with ferric chloride.
Biomass yield (dry solids) was 1.36 kg/m3
, 2.94 kg/m3
, 1 kg/m3
and
0.87 kg/m3
for media 1, 2, 3 and 4 respectively. The control had the
highest energy and economic worth per m3
of 3.07 kWh and £1.12
respectively. Media from lime treatment had the same energy and
economic worth per m3
of 2.51 kWh and £0.91 respectively. Media
from ferric chloride treatment had the least energy and economic
worth per m3
of 1.81 kWh and £0.66 respectively. Sludge liquor
has potential for wealth creation and sustainable energy
generation even after chemical sludge treatment, when used to
cultivate microalgae.
Index Terms— C.vulgaris, liquor, energy, anaerobic, digestion.
I. INTRODUCTION
A. Energy sources and demand
Energy generation with minimal greenhouse gas emissions
is of global importance. The comfortable exploitation of fossil
fuel resources for primary energy needs has become
burdensome. These resources are diminishing very fast [1] and
their use negatively affects the environment at large; with
increasing accumulation of carbon dioxide in the atmosphere
[2]. Renewable energy from biomass are now being exploited
for environmental and economic sustainability [3].
Biomass energy supply increased from 38 to 52EJ between
1990 and 2010 as a result of increased energy demand and
policies developed to increase the use of renewable energy [4].
Biomass is at present the largest contributor of world renewable
energy, with even more potentials to exploit for electricity, heat
and vehicle fuels [5].
1) Microalgae usage
Microalgae are single-cell, photosynthetic organisms [6],
with rapid growth rate and high energy content [6], [7].
Microalgae have been the focus of research towards biomass
production for renewable fuels such as biodiesel, methane,
biohydrogen and bioethanol [8]. Different media compositions
are proposed and used for growing microalgae, relative to
investigations of the chemical environment of the natural
occurring microalgae [9].
Microalgae has been used for many purposes such as
anaerobic digestion to biogas [10], gasification to methane or
hydrogen, transesterification to biodiesel [1], [6], pyrolysis gas
or liquid fuels and burning to generate heat and electricity [6].
B. Sewage sludge liquor and treatment
Currently in the UK about 1.2 megatonnes of dry solids of
wastewater sludge is produced annually and approximately 6.5
megatonnes of dry soilds by the EU as a whole [11]. Sludge
contains nutrients such as ammonia, potassium and phosphorus
and can therefore be used on agricultural lands for soil
enrichment. A number of approaches are used by different
wastewater treatment plants (WWTPs) to reduce sludge
volume; thereby minimising handling and cost of
transportation, destroying pathogens in the sludge and also
smell reduction [12].
Sludge treatment processes include thickening, dewatering,
biological treatment (anaerobic digestion and composting), and
chemical stabilization, thermal treatment and drying.
During sludge treatment liquor is produced. By convention
sludge liquor is returned to the WWTPs [13], [14] and removal
of ammonia and phosphorus is achieved during side stream
wastewater treatment [15]. This causes an additional nutrient
load [16] of up to 25 percent [12], [14], [17] to 30 percent [13],
[18]. The high cost involved in treating sludge liquor when
returned to treatment works, led to the decision by most
WWTPs to adopt sustainable and less expensive methods for
treating sludge liquor [13].
The use of microalgae for wastewater treatment purposes
began only in recent years (1970s) [19]. The eutrophication of
many waters due to effluent discharges, opened up the potential
for microalgae to be used in treating wastewater [19].
Cultivation of microalgae for biomass production can therefore
be achieved from nutrients in the wastewater [15]. More so, the
microalgae can be used to destroy pathogens in the wastewater,
by increasing the pH when CO2 is consumed [1].
2. International Journal of Technical Research and Applications e-ISSN: 2320-8163, www.ijtra.com
Special Issue 32 (September, 2015), PP. 49-55
50 | P a g e
C. Anaerobic digestion of microalgae
Anaerobic digestion (AD) of microalgae can be economical
for methane generation, using low cost microalgae cultivated
on wastewater or harvested from water bodies [10]. Unlike
biofuel production from algae that depends on the algae lipid
content, methane generation process recovers more energy than
available in cell lipid [20]. With a cell lipid content below 40%,
AD proves to be the optimal choice in terms of energy balance
[20]. Generation of biogas by AD eliminates a lot of energy
intensive steps such as drying and extraction [10].
Biochemical composition of biomass affects methane and
biogas yield from AD and the amount of VS destroyed during
AD is critical to the entire process. These factors put some
huddles in biogas production from algae biomass because algae
have limited biodegradability [10], [20]. For most macro- and
micro-algae, only about 20 to 60% VS destruction can be
achieved and as a result of algae cell wall, there is limited
accessibility of enzymes to the substrates [10]. Therefore
biodegradation is limited; leading to a longer retention time of
about 20 to 30 days for the conventional AD process [10]. Also
high cellular protein leads to release of ammonia, which in turn
could result in toxicity [20].
The AD of microalgae for biogas can also be combined with
the production of biodiesel using the post-extracted algal
biomass [10], [20]. It was reported that the conversion of low
lipid content algae to biogas has more potential energy than its
conversion to biodiesel alone, while a combination of both
yields the greatest energy output [21].
II. MATERIALS AND METHOD
A. Sludge sampling and liquor media preparation
Sewage sludge (combination of primary and secondary
sludge) was obtained from Esholt wastewater treatment plant,
UK. The sludge samples were chemically treated before
centrifuging to obtain the supernatant. The first sample was
prepared by adding 0.6 g zetag66 polyelectrolyte per litre of
sludge; this served as the control sample. Polyelectrolyte was
used to enhance dewatering. The second and third samples were
prepared by adding lime at different concentrations in order to
optimize the phosphorus distribution to the sludge cake.
Optimization was done at varying concentrations, but only the
liquor from the highest and least concentrations of lime was
used for microalgae cultivation. Therefore the second sample
was prepared using 27.5 g lime per litre of sludge, while the
third was prepared using 1.28 g of lime per litre of sludge. And
lastly the fourth sample was prepared by adding 35 g of ferric
chloride to the sludge to also enhance the phosphorus
distribution to the sludge cake. The samples were labelled
sample1, sample2, sample3 and sample4 respectively.
Sludge samples were centrifuged using Eppendorf
centrifuge5810 at 4000 revolutions per minute (rpm) for 30
minutes. Liquor samples obtained were too concentrated; still
having high amount of suspended solids. As this was assumed
to inhibit adequate light penetration for C.vulgaris
photosynthesis, each sample was further centrifuged using 50
ml centrifuge tubes at 4000 rpm for 40minutes. The supernatant
was then filtered using a GF/C 90mm filter paper; to obtain
clear liquor. Liquor samples were thereafter autoclaved at
120˚C and 2.5 bar pressure, in order to destroy any bacteria or
pathogen that could inhibit the growth of the algae in the media.
Samples were then cooled to room temperature.
Liquor samples were characterized for phosphate, pH,
alkalinity and ammonia-nitrogen; these parameters influenced
the dilutions done for each sample and the volume of C.vulgaris
used in preparing the culture media.
B. C.vulgaris cultivation in the liquor media
The liquor samples prepared from the sludge were used to
cultivate microalgae. C.vulgaris was obtained from a culture in
Bolds Basal Media (BBM) in the University of Leeds
laboratory, on the 4th day of culture (at the exponential growth
phase). Two hundred (200) ml of liquor media was prepared
from each sample and cultivated in 500 ml clogged conical
flasks. Aeration was achieved by the shaking action of the
incubator. Equal volume of C.vulgaris (50 ml) was used in each
media. Media1 was prepared using 1/15 ml dilution of sample1,
media2 was prepared using 1/3 ml dilution of sample2, media3
was prepared using 1/16.7 ml dilution of sample3 and lastly
media4 was prepared using 1/30 ml dilution of sample4. The
dilutions were done in order to control the nutrient in each
culture. The overall percentage ratio of liquor to C.vulgaris in
each media was 5:25, 25:25, 4.5:25 and 2.5:25 for media1,
media2, media3 and media4 respectively. The cultures were
then cultivated in the INFORS HT incubator for 14 days. Total
suspended solids (TSS) and volatile suspended solids (VSS)
tests were carried out on the media during the cultivation period.
These tests measure the biomass growth in the media.
1) Total Suspended Solids (TSS) and Volatile Suspended
Solids (VSS) Analysis
a) Materials
The ESS method 340.2 [22] was used to determine TSS and
VSS. Materials used for these tests include filtration apparatus,
9 cm glass fibre filter paper, vacuum pump, oven, furnace,
desiccators and watch glass.
b) Procedure
The glass fibre filter paper was weighed and recorded. The
filter paper was then placed on the filtration apparatus, with the
vacuum pump in place. Ten (10) ml of sample was filtered
through. The filter paper was then placed in an oven drying tray
and dried in the oven (Gollenhamp Hotbox oven) at 105°C for
24 hours. The filter paper was then placed in a crucible and kept
in a desiccator to cool. The filter paper was weighed at an
interval of 10 minutes, until a constant weight was recorded.
The TSS (mg/l) was then calculated using the formula below;
𝑇𝑆𝑆 =
𝑑𝑟𝑖𝑒𝑑 𝑤𝑡.(𝑚𝑔)− 𝑖𝑛𝑖𝑡𝑖𝑎𝑙 𝑤𝑡.(𝑚𝑔)
𝑣𝑜𝑙𝑢𝑚𝑒 𝑢𝑠𝑒𝑑 (𝑚𝑙)
× 1000. (1)
The volatile suspended solid (VSS) was then determined by
placing the filter paper from the TSS in a crucible and
transferring it to a furnace at 560˚C for 2 hours, to remove all
volatiles. Afterwards it was allowed to cool in a desiccator and
3. International Journal of Technical Research and Applications e-ISSN: 2320-8163, www.ijtra.com
Special Issue 32 (September, 2015), PP. 49-55
51 | P a g e
weighed continuously at an interval of 10 minutes, until a
constant weight was observed. The VSS (mg/l) was then
calculated by the equation;
𝑉𝑆𝑆 =
𝑑𝑟𝑖𝑒𝑑 𝑤𝑡.𝑓𝑟𝑜𝑚 𝑇𝑆𝑆 (𝑚𝑔)− 𝑓𝑖𝑛𝑎𝑙 𝑤𝑡.(𝑚𝑔)
𝑣𝑜𝑙𝑢𝑚𝑒 𝑢𝑠𝑒𝑑 (𝑚𝑙)
× 1000. (2)
C. C.vulgaris growth rate and biomass yield in liquor media
Using a spectrophotometer, the absorbance; optical density
at 540nm wavelength (OD540) was carried out on each media to
determine growth rate. Absorbance has been used to estimate
growth rate in microalgae cultivation [1], [19], [23]. Five point
measurements were done on day1, day4, day7, day11 and day14
and the increase in the absorbance was used to determine the
growth rate of the algae in each media. The growth rate was
then calculated using the equation below,
𝐺𝑟𝑜𝑤𝑡ℎ 𝑟𝑎𝑡𝑒 (/𝑑𝑎𝑦) = (𝐼𝑛𝑂𝐷𝑡 − 𝐼𝑛𝑂𝐷0) 𝑡⁄ . (3)
Where ODt is the optical density at day t, OD0 is the initial
optical density and t is the number of days.
At the end of the 14 days cultivation period, the percentage
biomass yield was calculated as a function of the total
suspended solids (TSS);
𝑇𝑆𝑆 𝑌𝑖𝑒𝑙𝑑 (%) =
𝑇𝑆𝑆 𝑓−𝑇𝑆𝑆 𝑖
𝑇𝑆𝑆 𝑓
× 100. (4)
The Volatile suspended solids (VSS) yield was calculated
as a percentage of the TSS using the equation;
𝑉𝑆𝑆 𝑌𝑖𝑒𝑙𝑑 (%) =
𝑉𝑆𝑆 𝑓−𝑉𝑆𝑆 𝑖
𝑇𝑆𝑆 𝑓−𝑇𝑆𝑆 𝑖
× 100. (5)
Where TSSf and VSSf are the TSS and VSS values after 14
days respectively and TSSi and VSSi are the initial TSS and
VSS values after media preparation before culture.
C.vulgaris yield per m3
of media was also calculated for all
liquor media using the equation below;
𝑌𝑑 =
𝑇𝑆𝑆 𝑓−𝑇𝑆𝑆 𝑖
1000
(6)
Where Yd = Biomass yield (kgDS/m3
media),
TSSf = final TSS (mg/l) and
TSSi = initial TSS (mg/l).
𝑌𝑣 =
𝑉𝑆𝑆 𝑓− 𝑉𝑆𝑆 𝑖
1000
(7)
Where Yv = biomass yield (kgVS/m3
media),
VSSf = final VSS (mg/l) and
VSSi = initial VSS (mg/l)
D. Methane and energy worth of C.vulgaris from liquor media
The theoretical methane that can be achieved from
C.vulgaris biomass obtained was calculated. A Biochemical
Methane Potential (BMP) test was carried out on the AD of
C.vulgaris. The result was then used to estimate how much
methane can be obtained from C.vulgaris cultivated in the
liquor media.
𝑌𝑀 = 𝐵𝑀𝑃 × 𝐵𝑖𝑜𝑚𝑎𝑠𝑠 𝑉𝑆𝑆 (𝑘𝑔 𝑚3
𝑚𝑒𝑑𝑖𝑎)⁄ (8)
Where YM = Methane yield (m3
/m3
media),
BMP = biochemical methane potential
(m3
methane/kgVSSadded)
The energy worth of 1 m3
of liquor media was then analysed.
One (1) Nm3
(normalized cubic metre) of methane is reported
to be equivalent to 9.97 kWh of energy [24]. Therefore from the
methane yield calculated, the amount of energy per m3
of media
was estimated by the following equation;
𝐸𝑛𝑒𝑟𝑔𝑦 (𝑘𝑊ℎ/𝑚3
𝑚𝑒𝑑𝑖𝑎) = 9.97 × 𝑌𝑀. (9)
The use of AD technology to generate energy in the UK has
been greatly encouraged by some government incentives. These
incentives are avenues to generate income for the energy
derived from any AD plant. Figure 1 shows the options for the
methane generated from AD and their respective incentives.
For the sake of this study, the use of methane for income
generation from combined heat and power was analysed. The
Department for food and rural affairs, UK (Defra) [25] reported
that using AD to generate renewable energy attracts 2
RoCs/MWh. A typical value of £80/MWh was assumed for 1
RoC. FiTs for small scale AD with capacity of up to 250 kW is
14p/kWh and 13p/kWh is provided for capacities between
250kW and 500kW [25]. Therefore 14p/kWh was used for
FiTs. Lastly the RHi provides 6.5p/kWh over a 20 year period
for biogas combustion in installations below 200kWh and
biomethane injection into the gas grid at all scales [25]. These
incentives were then used to estimate the financial worth of the
methane generated from liquor media.
III. RESULTS AND DISCUSSION
A. C.vugaris cultivation and growth rate in liquor media
For each media, a different amount of ammonia and
phosphate was taken up by C.vulgaris. The initial and final
media characteristics are presented in table 1.
The growth rate of C.vulgaris calculated during the
exponential growth phase and the biomass yield are presented
in table 2. In contrast to the low specific growth rates of
C.vulgaris observed in all media presented in table 2, an
average specific growth rate of 0.948 d-1
for Chlorella sp. when
cultivated in sludge liquor was reported [19].
Low growth rates have however been recorded for Chlorella sp.
cultivated in different media types; a specific growth rate for
Chlorella sp. of 0.035 day-1
, when cultivated on filtrate from
anaerobic digestate [26], growth rate for Chlorella sp. of 0.45
day-1
when cultivated in a modified Zarrouk medium was also
4. International Journal of Technical Research and Applications e-ISSN: 2320-8163, www.ijtra.com
Special Issue 32 (September, 2015), PP. 49-55
52 | P a g e
recoded [27] and a low growth rate for C.vulgaris of 0.103 d-1
at the exponential growth phase,
Fig. 1. End use options for Methane from Anaerobic Digestion and their respective incentives in the United Kingdom.
when cultivated in BG11 medium [15]. The low growth rate
recorded in this study can be said to be influenced by the N/P
ratios of the media in the range of 13.3 – 42.9 compared to the
suggested optimal range of 6.8 – 10. Clearly only media1 had
close to the suggested range.
Media1 and media4 in fig. 2 demonstrate a standard growth
curve of C.vulgaris in batch cultivation. The trend of media2
and 3 shows that if the cultivation was continued after the 14
days cultivation period, more growth would be realised from
the media. The high absorbance observed in the media from
chemical treatments (2, 3 and 4) could be due to the residual
effect of the chemicals used in the three media during sludge
treatment.
The outcome of C.vulgaris cultivation showed that media2
with equal amount of C.vulgaris and liquor had the highest
biomass yield (dry solids) of 2.94 kg/m3
followed by media1
yielding 1.36 kg/m3
, media 3 yielded 1 kg/m3
and finally
media4 yielded 0.89 kg/m3
. This follows the increasing order of
C.vulgaris in the media; that is media2 had the least amount of
C.vulgaris, followed by media1, media3 and
Fig. 2. C.vulgaris growth curve in liquor media
media4 in that order. Therefore increasing the amount of
C.vulgaris in sludge liquor media will gave rise to decrease in
the biomass yield (dry solids). As all media had suitable pH and
no media was starved of nutrient; having sufficient ammonia
and phosphate, the ratio of C.vulgaris to liquor can be said to
be the primary influence for the biomass yield observed.
B. Methane yield and energy potential following anaerobic
digestion of C.vulgaris
The amount of volatile solids generated is of great
importance. Media1 had the highest amount of volatile solids of
0.88 kg/m3
, media2 and 3 had the same amount of volatile solids
of 0.72 kg/m3
while media3 had the least amount of volatile
solids of 0.52 kg/m3
. The amount of methane that could be
generated from C.vulgaris biomass cultivated in the control
media was calculated as described in Eq. 6 and Eq 7. The
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
1 4 8 11 15
Absorbanceat540nm
Days
Media 1
Media 2
Media 3
Media 4
5. International Journal of Technical Research and Applications e-ISSN: 2320-8163, www.ijtra.com
Special Issue 32 (September, 2015), PP. 49-55
53 | P a g e
methane potential from the BMP test on C.vulgaris was 0.35
m3
/kgVSadded. A similar BMP of 0.31 NL-methane/gVSadded for
Chlorella cultivated on sludge liquor was recorded [26]. On the
other hand, a low methane yield from 100% Chlorella digestion
of 126 mL-CH4/gVSfed have also been recorded [27].
The essence of estimating the methane yield is to know the
energy and economic worth of sludge liquor when C.vulgaris is
cultivated on it. Since 1 Nm3
-methane is equivalent to 9.97 kWh
of energy [24], [28], a sum of 36.5p/kWh is obtainable from
energy generated, using the incentives from fig. 1.
Figure 3 shows that media1 had the highest methane yield
of 0.308 m3
/m3
media, media2 and media3 from the lime
treatment liquor both yielded 0.252 m3
/m3
media, while media4
had the least methane yield of 0.182 m3
/m3
media.
With energy equivalent of 9.97 kWh per Nm3
-methane,
dewatering liquor from WWTPs yields up to 3.07
kWh/m3
media. Therefore in cultivating C.vulgaris for methane
generation from AD, more attention should be paid to factors
that enhance volatile solids than dry solids yield.
Table 1. Initial and final characteristics of media samples
Media 1 Media 2 Media 3 Media 4
initial final initial final initial final initial final
pH 9.39 7.92 9.09 7.82 9.76 7.82 7.50 7.82
Alkalinity (mgCaCO3/l) 1730.0 215.0 2805.0 2245.0 1985.0 2507.7 789.2 1045.0
Ammonia (mg/l) 212.8 5.6 212.8 33.6 302.4 33.6 515.2 44.8
Phosphate (mg/l) 16.00 1.36 7.50 0.80 10.25 1.20 12.00 2.00
TSS (mg/l) 60 1420 100 3040 200 1200 410 1280
VSS (mg/l) 450 1330 710 1430 400 1220 470 990
Figure 3. Methane yield per cubic meter of liquor media in comparison with
biomass yield.
Raw liquor from dewatering process has good methane and
energy potential. Liquor from lime treatment would generate
about the same amount of methane (regardless of the amount
used); this should be considered when using such treatment.
Ferric chloride treatment would have significant effect on the
methane generated from the liquor media.
Table 2. C.vulgaris specific growth rate and percentage biomass yield after 14
days of cultivation
Sample Growth rate (/d) Biomass yield (%)
TSS VSS (% of TSS)
Media 1 0.228 95.8 65
Media 2 0.020 96.7 24
Media 3 0.185 83.3 72
Media 4 0.231 68.0 60
The resultant energy and economic worth of 1 m3
of each
liquor media used have been presented in table 3.
The conventional oxidation of ammonium ions to nitrate
(NO3̄) and then denitrification to nitrogen gas as a treatment
option in WWTPs require a lot of energy for pumping and
aeration and therefore high cost. For this process, 4.57
gO2/gNH3-N is required for complete oxidation. It therefore
means that for the 2240 mgNH3-N/l (2.24 gNH3-N/l) in the
liquor obtained from sample1, an additional 10.24 gO2/l (10.24
kgO2/m3
) is required. On the other hand, the photosynthetic
activity of the microalgae produces oxygen. A maximum of 10
gO2 m-3
min-1
(14.4 kgO2 m-3
d-1
) can be generated by
microalgae in a typical photobioreactor [29]. Therefore, 141%
of the oxygen required to treat the liquor by conventional
process would be produced daily. This can be extracted and
used in WWTPs for other necessary biological processes. The
energy and cost of aeration as required by the conventional
process would therefore be greatly saved.
Also 1 m3
of media has a financial worth of £1.12. The
ammonia available in the liquor from sample1 is about 11 times
the ammonia required to prepare media1. Therefore, 11 times
the financial worth of 1 m3
of media can be generated. In
essence, the raw liquor from sludge dewatering is worth about
£12.32.
Table 3. Energy and economic value of 1m3
liquor media and the respective
ammonia and phosphate required.
Sample Energy yield
(kWh/m3
media)
Economic
worth
(£/m3
media)
Ammonia
required
(mg/l)
Phosphate
required
(mg/l)
Media 1
Media 2
Media 3
Media 4
3.07
2.51
2.51
1.81
1.12
0.91
0.91
0.66
207.2
179.2
268.8
459.2
14.64
6.7
9.05
10
Chemical precipitation of nutrients into the sludge cake
depends on specific soil characteristics and the availability of
plant to use up the nutrient [17]. Therefore if there is insufficient
landbank or where there are stringent regulations regarding the
spreading of sludge cake on land, the process becomes futile.
As such since C.vulgaris showed an impressive growth with the
highest economic value in the raw liquor media, it would be
better to use just microalgae for treating sludge liquor.
0
0.5
1
1.5
2
2.5
3
Yield
Liquor media
Biomass yield
(kgDS/m3 media)
Methane yield
(m3/m3 media)
Biomass yield
(kgVS/m3 media)
6. International Journal of Technical Research and Applications e-ISSN: 2320-8163, www.ijtra.com
Special Issue 32 (September, 2015), PP. 49-55
54 | P a g e
However, wherever it is necessary to use chemicals, only little
chemical dosing should be employed in order to save cost.
IV. CONCLUSION
The energy and revenue potential of the biomass generated
from cultivating C.vulgaris on sludge liquor makes the use of
C.vulgaris for sludge liquor treatment more economical than
conventional nutrient removal processes.
REFERENCES
[1] F. Ahmad, A. Khan, and A. Yasar, “The potential of Chlorella
vulgaris for wastewater treatment and biodiesel production,”
Pakistan J. Bot., vol. 45, no. 1, pp. 461–465, 2013.
[2] Y. P. Li, G. H. Huang, and M. W. Li, “An integrated optimization
modeling approach for planning emission trading and clean-
energy development under uncertainty,” Renew. Energy, vol. 62,
pp. 31–46, Feb. 2014.
[3] B. Esteban, J.-R. Riba, G. Baquero, R. Puig, and A. Rius,
“Environmental assessment of small-scale production of wood
chips as a fuel for residential heating boilers,” Renew. Energy,
vol. 62, pp. 106–115, Feb. 2014.
[4] World Energy Council, “World Energy Resources 2013,”
London, 2013.
[5] World Energy Council, “World Energy Resources: Bioenergy,”
London, 2013.
[6] A. L. Stephenson, E. Kazamia, J. S. Dennis, C. J. Howe, S. a.
Scott, and A. G. Smith, “Life-Cycle Assessment of Potential
Algal Biodiesel Production in the United Kingdom: A
Comparison of Raceways and Air-Lift Tubular Bioreactors,”
Energy & Fuels, vol. 24, no. 7, pp. 4062–4077, Jul. 2010.
[7] A. Singh, P. S. Nigam, and J. D. Murphy, “Renewable fuels from
algae: an answer to debatable land based fuels.,” Bioresour.
Technol., vol. 102, no. 1, pp. 10–6, Jan. 2011.
[8] K.-L. Yeh and J.-S. Chang, “Effects of cultivation conditions and
media composition on cell growth and lipid productivity of
indigenous microalga Chlorella vulgaris ESP-31.,” Bioresour.
Technol., vol. 105, pp. 120–7, Feb. 2012.
[9] R. K. Mandalam and B. O. Palsson, “Elemental balancing of
biomass and medium composition enhances growth capacity in
high-density Chlorella vulgaris cultures.,” Biotechnol. Bioeng.,
vol. 59, no. 5, pp. 605–611, Sep. 1998.
[10] P. Bohutskyi, M. J. Betenbaugh, and E. J. Bouwer, “The effects
of alternative pretreatment strategies on anaerobic digestion and
methane production from different algal strains.,” Bioresour.
Technol., vol. 155, pp. 366–72, Mar. 2014.
[11] N. K. Garg, “Multicriteria Assessment of Alternative Sludge
Disposal Methods Neeraj Kumar Garg,” University of
Strathclyde, 2009.
[12] T. Evans, “SEWAGE SLUDGE : Operational and Environmental
Issues,” United Kingdom, 2011.
[13] F. N. Ocansey, “New trends in the treatment of reject water from
dewatering of sludge,” University of Lund, 2005.
[14] T. Evans, “Sludge treatment and dewatering,” water sewarage J.,
vol. 4, pp. 39–41, 2011.
[15] R. Boonchai, G. T. Seo, D. R. Park, and C. Y. Seong, “Microalgae
Photobioreactor for Nitrogen and Phosphorus Removal from
Wastewater of Sewage Treatment Plant,” Int. J. Biosci. Biochem.
Bioinforma., vol. 2, no. 6, pp. 407–410, 2012.
[16] H. W. Demooij and G. Thomas, “Ammoniacal Nitrogen Removal
from Sludge Liquors – Operational experience with the DEMON
process Keywords The Apeldoorn Project,” in 15th European
Biosolids and Organic Resources Conference, 2010.
[17] N. Jardin, D. Thöle, and B. Wett, “Treatment of sludge return
liquors: experiences from the operation of full-scale plants,”
Proc. Water Environ. Found., pp. 5237–5255, 2006.
[18] D. Willie and G. Reitsma, “One-Step ANAMMOX Process: a
sustainable way to remove ammoniacal nitrogen,” United
Kingdom, 2011.
[19] L. Wang, M. Min, Y. Li, P. Chen, Y. Chen, Y. Liu, Y. Wang, and
R. Ruan, “Cultivation of green algae Chlorella sp. in different
wastewaters from municipal wastewater treatment plant.,” Appl.
Biochem. Biotechnol., vol. 162, no. 4, pp. 1174–86, Oct. 2010.
[20] B. Sialve, N. Bernet, and O. Bernard, “Anaerobic digestion of
microalgae as a necessary step to make microalgal biodiesel
sustainable.,” Biotechnol. Adv., vol. 27, no. 4, pp. 409–16, 2009.
[21] R. Harun, M. Davidson, M. Doyle, R. Gopiraj, M. Danquah, and
G. Forde, “Technoeconomic analysis of an integrated microalgae
photobioreactor, biodiesel and biogas production facility,”
Biomass and Bioenergy, vol. 35, no. 1, pp. 741–747, Jan. 2011.
[22] USEPA, “ESS method 340.2,” United States, 1993.
[23] F. Ji, Y. Liu, R. Hao, G. Li, Y. Zhou, and R. Dong, “Bioresource
Technology Biomass production and nutrients removal by a new
microalgae strain Desmodesmus sp . in anaerobic digestion
wastewater,” Bioresour. Technol., vol. 161, pp. 200–207, 2014.
[24] N. Horan, “Basic Terminology. CIVE5532M Wastewater and
organic waste management,” Univ. Leeds., 2013.
[25] Defra, “Anaerobic Digestion Strategy and Action Plan,” 2011.
[26] T. Hidaka, K. Inoue, Y. Suzuki, and J. Tsumori, “Bioresource
Technology Growth and anaerobic digestion characteristics of
microalgae cultivated using various types of sewage,” Bioresour.
Technol., vol. 170, pp. 83–89, 2014.
[27] M. Wang, A. K. Sahu, B. Rusten, and C. Park, “Bioresource
Technology Anaerobic co-digestion of microalgae Chlorella sp .
and waste activated sludge,” Bioresour. Technol., vol. 142, pp.
585–590, 2013.
[28] N. Horan, “The products: Biogas and Digestate. CIVE5532M
Wastewater and organic waste management,” Univ. Leeds., 2013.
[29] Y. Chisti, “Biodiesel from microalgae.,” Biotechnol. Adv., vol.
25, no. 3, pp. 294–306, 2007.