Efm
•Download as DOCX, PDF•
0 likes•219 views
To construct a triangular pyramid, roll sheets of paper parallel to the diagonal and glue the corners to make 6 rolls total. Cut some rolls to varying lengths and assemble them into a pyramid shape by inserting cut rolls between uncut rolls and spinning them together. For stability, insert an uncut roll between two cut rolls on the sides and a double cut roll at the top.
Report
Share
Report
Share
Recommended
Meitaaa
This document provides instructions for constructing a triangular pyramid out of used paper. The materials needed are used paper, glue, and scissors. The construction involves rolling paper strips, gluing the ends to form loops, and combining the loops in specific ways to form the triangular base and triangular sides of the pyramid shape. Photos are included showing each step of the construction process. The completed pyramid can be used to teach students about geometric properties of pyramids based on triangles.
Sewing
This document lists and categorizes various tools used for sewing and garment construction. It separates the tools into four categories: measuring tools which include tapes, gauges, rulers, and squares; cutting tools such as shears, scissors, and rotary cutters; marking tools like pencils, pens, and wheels; and pinning/sewing tools including cushions, needles, and thimbles. In total, it outlines over 20 essential tools that seamstresses use for tasks like measuring, marking, cutting, and assembling fabrics and textiles.
Sewing Tools (Clothing1)
This document provides information about the basic tools, equipment, and processes used for sewing. It identifies the five basic sewing processes as measuring, cutting, marking, hand stitching, machine stitching, and pressing. The document then lists and describes the various tools used for each step, including tapes, rulers, scissors, pins, needles, thread, and sewing machines. It discusses the importance of knowing how to sew and provides classroom activities and assignments for students to learn to identify tools and sewing processes.
Max2015 ch07
This document discusses modeling a character in 3ds Max 2015. It describes setting up the scene with reference planes and blocking out the basic torso shape. It then discusses using extrude and bridge tools to add arms, legs, and details to the character, as well as building up the neck with extrudes and edge loops. The overall goal is to adjust the geometry to match a provided reference of the character.
Sewing equipment
This document provides a summary of basic sewing equipment including a pin cushion to hold pins, pins to hold fabric together, tailor's chalk for marking fabric, a seam gauge ruler for measuring hems and details, a seam ripper for removing stitches, fabric shears for cutting only fabric, scissors for cutting patterns, a transparent ruler and measuring tape for accurate cuts and measurements, and thread for sewing.
sewing tools and equipments
This document provides information about various sewing tools and equipment, their classification, and uses. It discusses different types of measuring tools like tape measures and rulers, cutting tools like shears and seam rippers, marking tools like chalk and pens, and pinning tools like thimbles. It also lists common sewing tools under each category and provides details about their purposes. For example, it states that bent-handled dressmaker's shears are used for cutting fabrics and seam rippers are used for removing stitches. The document aims to educate about proper tool selection and application for sewing tasks.
Sewing Tools Powerpoint
Sewing tools can be divided into four main categories: measuring, marking, cutting, and sewing. Measuring tools such as tape measures and seam gauges are necessary to produce well-fitting garments. Marking tools like dressmakers' pencils and tailors' chalk help transfer patterns to fabric. Accurate cutting requires tools like scissors and shears. Other useful tools include beeswax, thimbles, and various types of needles. Proper care and storage of sewing tools in a kit helps ensure safety and longevity.
Sewing tools measuring devices
This document provides information on various measuring and marking tools used for sewing. It describes tape measures, rulers, T-squares, French curves, yardsticks, sewing gauges, skirt markers, dressmaker's gauges, and hem gauges; and explains what each tool is used for, such as taking body measurements, checking fabric grain lines, marking buttonholes, and marking hems.
Recommended
Meitaaa
This document provides instructions for constructing a triangular pyramid out of used paper. The materials needed are used paper, glue, and scissors. The construction involves rolling paper strips, gluing the ends to form loops, and combining the loops in specific ways to form the triangular base and triangular sides of the pyramid shape. Photos are included showing each step of the construction process. The completed pyramid can be used to teach students about geometric properties of pyramids based on triangles.
Sewing
This document lists and categorizes various tools used for sewing and garment construction. It separates the tools into four categories: measuring tools which include tapes, gauges, rulers, and squares; cutting tools such as shears, scissors, and rotary cutters; marking tools like pencils, pens, and wheels; and pinning/sewing tools including cushions, needles, and thimbles. In total, it outlines over 20 essential tools that seamstresses use for tasks like measuring, marking, cutting, and assembling fabrics and textiles.
Sewing Tools (Clothing1)
This document provides information about the basic tools, equipment, and processes used for sewing. It identifies the five basic sewing processes as measuring, cutting, marking, hand stitching, machine stitching, and pressing. The document then lists and describes the various tools used for each step, including tapes, rulers, scissors, pins, needles, thread, and sewing machines. It discusses the importance of knowing how to sew and provides classroom activities and assignments for students to learn to identify tools and sewing processes.
Max2015 ch07
This document discusses modeling a character in 3ds Max 2015. It describes setting up the scene with reference planes and blocking out the basic torso shape. It then discusses using extrude and bridge tools to add arms, legs, and details to the character, as well as building up the neck with extrudes and edge loops. The overall goal is to adjust the geometry to match a provided reference of the character.
Sewing equipment
This document provides a summary of basic sewing equipment including a pin cushion to hold pins, pins to hold fabric together, tailor's chalk for marking fabric, a seam gauge ruler for measuring hems and details, a seam ripper for removing stitches, fabric shears for cutting only fabric, scissors for cutting patterns, a transparent ruler and measuring tape for accurate cuts and measurements, and thread for sewing.
sewing tools and equipments
This document provides information about various sewing tools and equipment, their classification, and uses. It discusses different types of measuring tools like tape measures and rulers, cutting tools like shears and seam rippers, marking tools like chalk and pens, and pinning tools like thimbles. It also lists common sewing tools under each category and provides details about their purposes. For example, it states that bent-handled dressmaker's shears are used for cutting fabrics and seam rippers are used for removing stitches. The document aims to educate about proper tool selection and application for sewing tasks.
Sewing Tools Powerpoint
Sewing tools can be divided into four main categories: measuring, marking, cutting, and sewing. Measuring tools such as tape measures and seam gauges are necessary to produce well-fitting garments. Marking tools like dressmakers' pencils and tailors' chalk help transfer patterns to fabric. Accurate cutting requires tools like scissors and shears. Other useful tools include beeswax, thimbles, and various types of needles. Proper care and storage of sewing tools in a kit helps ensure safety and longevity.
Sewing tools measuring devices
This document provides information on various measuring and marking tools used for sewing. It describes tape measures, rulers, T-squares, French curves, yardsticks, sewing gauges, skirt markers, dressmaker's gauges, and hem gauges; and explains what each tool is used for, such as taking body measurements, checking fabric grain lines, marking buttonholes, and marking hems.
PAA 9: Hand sewing tools
This document lists and describes common hand sewing tools and supplies, including felt fabric, sewing needles, threads, scissors, seam rippers, fiber/poly fill, tailor's pins, pincushions, marking tools, needle threaders, thimbles, tape measures, seam gauges, and buttons. The tools are used for tasks like sewing stitches, cutting/removing seams, filling toys, holding fabric pieces, storing pins, marking fabric, threading needles, protecting fingers, measuring, and both functional and decorative purposes.
To make a cross half lap joint
The document summarizes an experiment to make a cross half lap joint using teak wood. It lists the materials, tools, steps of the procedure which include planning, marking, sawing, chiseling and finishing. Precautions are mentioned such as keeping the wood free of moisture and carefully chiseling. The result is that the cross half lap joint was made successfully.
Q1 wk1 d1 classification of sewing tools and materials
Home Economics Grade 8 Exploratory
Module 1 classification of sewing tools and materials
for tondo high school students
Day 3 media and information literacy training (2D Animation)
The document discusses media and information literacy topics such as typography, infographics, websites, and animation elements and principles. It provides examples of offline and online animation tools like Pencil2D, Synfig Studio, and Stykz. The bulk of the document outlines Flash animation tutorials, including examples of motion tweens, shape tweens, and transitions between shapes and text. It concludes by listing 6 scene examples that could be created using the Flash tutorials covered.
Sewing tools and EQUIPMENT (Credit to Deped)
This document provides an overview of the various tools and equipment used in sewing. It discusses measuring tools like tape measures and rulers, cutting tools such as shears and rotary cutters, marking tools including chalk and pens, pinning and sewing tools like thimbles and needles, and basic materials like fabric and thread. The document aims to equip students with knowledge of the complete set of tools needed for sewing and how to use them properly to work efficiently.
To make M.S Plate into required model by square T-fitting.
The document describes an experiment to make a square T-fitting from mild steel plate using various tools. The procedure involves filing the pieces to remove burrs and check dimensions, marking the required dimensions for the fitting, sawing and chipping away unwanted material, and filing edges and corners to finalize the shape. Safety precautions include careful marking, using coolant while sawing, and cleaning tools properly. The result is a square T-fitting made to the required dimensions.
Measuring and Cutting tools use in sewing.
This document discusses important tools used for dressmaking and tailoring. It identifies key measuring tools like tape measures, rulers, sewing gauges, and yardsticks that are essential for taking accurate body and garment measurements. Cutting tools such as bent handled shears, pinking shears, scissors, seam rippers, and thread clippers are also outlined as important for precision cutting of fabrics and threads. Maintaining high quality stainless steel cutting tools and periodically sharpening them is advised.
To make a dovetail lap joint.
This experiment aims to create a dovetail lap joint using teak wood. The materials needed are teak wood pieces measuring 30mm by 150mm by 50mm. Tools used include a steel rule, try square, marking gauge, rip saw, tenon saw, mortise chisel, mallet, jack plane, and wood rasp file. The procedure involves planning the wood pieces, marking lines using the gauge, sawing portions to be removed, chiseling away excess wood in each piece to create the dovetail shape, and finishing by fitting the pieces together tightly.
Iron worker
The document lists various tools used by iron workers including a wrench for tightening bolts, a hickey bar for cutting threads, a piano wire for bending reinforcing bars, a die for marking steel, and a tool belt and transit for holding tools and measuring angles. Keel is used to align steel pieces.
Marking out tools
This module aims to teach students how to mark out workpieces based on engineering drawings. It introduces common marking out tools like scribers, marking blue, punches, engineers squares, surface plates, surface gauges, angle plates, vee blocks, spring dividers and ball peen hammers. It explains how to use each tool, highlighting scribers are used to make lines, marking blue helps lines contrast, punches indent surfaces, and squares, plates and gauges aid layout accuracy. Maintaining tools like keeping plates oiled is also covered.
To make M.S Plate into required model by V- fitting.
This experiment involves making a V-shaped fitting by filing, marking, sawing, and fitting two mild steel plates together. The plates are filed flat and square, then dots are punched along lines marked with dimensions for the V-shape. Unwanted material is cut using a hacksaw and chisel, then edges are filed and corners shaped to precisely fit the two plates together in a V-shape, as required.
Marking tools
The tools of technology class include marking tools like scribers, rulers, set-squares, divider compasses, punches, pencils, and markers. A scriber is used to make thin, semi-permanent marks on metalwork before machining. A graduated metal ruler measures lengths with millimeter graduations. A metal set-square has a sharpened 60° pointer used to mark points for holes. Divider compasses can inscribe circles or arcs and also measure distances. Punches are used to drive or imprint objects using a hammer. Pencils and markers contain solid pigment cores inside casings to mark without breaking or soiling hands.
He module 5
This document provides information about basic clothing and sewing tools for the first year module. It begins with a pre-test of multiple choice questions to assess knowledge of sewing tools and machine parts. It then provides details about different types of measuring, drafting, cutting, marking and sewing tools. The last section describes the main parts of a sewing machine and how to properly thread the upper and lower portions.
sewing tools
This document provides descriptions of common tools used for sewing. It describes sewing needles, pins, threads, a pincushion, tape measure, tailor's chalk, rotary cutter, scissors, thread clippers, bodkin, and French curve. The tools are used for tasks like holding fabric together temporarily, cutting fabric layers simultaneously, snipping threads, drawing elastic through casings, and shaping pattern pieces.
Lesson8
This document provides instructions for constructing 3D shapes in 4 ways: extrude, sweep, revolve, and loft. Extrude allows pushing a 2D shape out to create a 3D object. Sweep uses a profile shape moved along a path curve. Revolve spins a profile around an axis to form a 3D shape. Loft combines two or more 2D shapes into a single 3D object. Key terms are defined, like profile, intersect, and axis. Step-by-step directions are given for each construction method.
Year 10 Engineering - Lesson 5 - How To Mark Out The Spinner 2
The document provides instructions for marking out a hexagon shape on a piece of metal using common metalworking tools. It describes 5 essential tools - steel rule, dividers, scribe, centre punch, and engineer's square. It then gives a step-by-step process for using these tools to precisely mark out the points and lines of a hexagon, including applying engineer's blue, drawing center and edge lines, punching indentations at points, and using a divider to scribe arcs between points, resulting in a completely marked out hexagonal shape.
Year 10 Engineering - Lesson 5 - How To Mark Out The Spinner
The document provides step-by-step instructions for marking out a hexagonal spinner shape on a piece of metal using various tools. It describes cleaning the metal, drawing center and edge lines using a square and scribe, punching indentation marks at set intervals, using dividers to draw quarter circles connecting the marks to create the hexagon outline, and then joining the marks with lines. The overall process allows for precisely marking out the hexagonal shape for cutting.
Quality drawing
This document discusses the equipment and skills needed to create quality drawings using a drawing board. It lists drawing board equipment like parallel motion, set squares, and fixing clips. It outlines three levels of skills - being able to name equipment, describe equipment, and state the use of equipment. The levels also involve creating basic and more advanced 2D and 3D drawings, like grids and cubes of increasing accuracy. The document provides drawing exercises and asks students to identify rules and equipment for using a drawing board.
Measuring tools
This document discusses various tools used in sewing and garment construction. It describes a flexible tape measure of at least 60 inches for taking body measurements. A ruler measuring 12 or 18 inches is useful for measuring and drawing straight lines and cutting. A yardstick made of hardwood or metal is used for marking hemlines and checking grainlines. A 24" hip curve ruler can be used to create graceful curves for garment and lapel design. A French curve is a template used to draw smooth curves of varying radii, while an L-square is useful for constructing perpendicular lines.
Lesson 11
1. The document provides instructions for using patterns, grouping, hiding/showing, mirroring, and applying materials in a 3D design software. It describes how to create rectangular and circular patterns, path patterns along a spline, group objects, hide and show objects, mirror objects, and apply materials.
2. Key steps include selecting objects, using pattern tools to repeat objects in different directions or around an axis, grouping multiple objects, hiding objects by clicking the eye icon, mirroring objects across a plane, and applying materials of different colors.
3. The goal is to learn various techniques for finishing 3D designs using patterns, grouping, transformations, and materials.
More Related Content
What's hot
PAA 9: Hand sewing tools
This document lists and describes common hand sewing tools and supplies, including felt fabric, sewing needles, threads, scissors, seam rippers, fiber/poly fill, tailor's pins, pincushions, marking tools, needle threaders, thimbles, tape measures, seam gauges, and buttons. The tools are used for tasks like sewing stitches, cutting/removing seams, filling toys, holding fabric pieces, storing pins, marking fabric, threading needles, protecting fingers, measuring, and both functional and decorative purposes.
To make a cross half lap joint
The document summarizes an experiment to make a cross half lap joint using teak wood. It lists the materials, tools, steps of the procedure which include planning, marking, sawing, chiseling and finishing. Precautions are mentioned such as keeping the wood free of moisture and carefully chiseling. The result is that the cross half lap joint was made successfully.
Q1 wk1 d1 classification of sewing tools and materials
Home Economics Grade 8 Exploratory
Module 1 classification of sewing tools and materials
for tondo high school students
Day 3 media and information literacy training (2D Animation)
The document discusses media and information literacy topics such as typography, infographics, websites, and animation elements and principles. It provides examples of offline and online animation tools like Pencil2D, Synfig Studio, and Stykz. The bulk of the document outlines Flash animation tutorials, including examples of motion tweens, shape tweens, and transitions between shapes and text. It concludes by listing 6 scene examples that could be created using the Flash tutorials covered.
Sewing tools and EQUIPMENT (Credit to Deped)
This document provides an overview of the various tools and equipment used in sewing. It discusses measuring tools like tape measures and rulers, cutting tools such as shears and rotary cutters, marking tools including chalk and pens, pinning and sewing tools like thimbles and needles, and basic materials like fabric and thread. The document aims to equip students with knowledge of the complete set of tools needed for sewing and how to use them properly to work efficiently.
To make M.S Plate into required model by square T-fitting.
The document describes an experiment to make a square T-fitting from mild steel plate using various tools. The procedure involves filing the pieces to remove burrs and check dimensions, marking the required dimensions for the fitting, sawing and chipping away unwanted material, and filing edges and corners to finalize the shape. Safety precautions include careful marking, using coolant while sawing, and cleaning tools properly. The result is a square T-fitting made to the required dimensions.
Measuring and Cutting tools use in sewing.
This document discusses important tools used for dressmaking and tailoring. It identifies key measuring tools like tape measures, rulers, sewing gauges, and yardsticks that are essential for taking accurate body and garment measurements. Cutting tools such as bent handled shears, pinking shears, scissors, seam rippers, and thread clippers are also outlined as important for precision cutting of fabrics and threads. Maintaining high quality stainless steel cutting tools and periodically sharpening them is advised.
To make a dovetail lap joint.
This experiment aims to create a dovetail lap joint using teak wood. The materials needed are teak wood pieces measuring 30mm by 150mm by 50mm. Tools used include a steel rule, try square, marking gauge, rip saw, tenon saw, mortise chisel, mallet, jack plane, and wood rasp file. The procedure involves planning the wood pieces, marking lines using the gauge, sawing portions to be removed, chiseling away excess wood in each piece to create the dovetail shape, and finishing by fitting the pieces together tightly.
Iron worker
The document lists various tools used by iron workers including a wrench for tightening bolts, a hickey bar for cutting threads, a piano wire for bending reinforcing bars, a die for marking steel, and a tool belt and transit for holding tools and measuring angles. Keel is used to align steel pieces.
Marking out tools
This module aims to teach students how to mark out workpieces based on engineering drawings. It introduces common marking out tools like scribers, marking blue, punches, engineers squares, surface plates, surface gauges, angle plates, vee blocks, spring dividers and ball peen hammers. It explains how to use each tool, highlighting scribers are used to make lines, marking blue helps lines contrast, punches indent surfaces, and squares, plates and gauges aid layout accuracy. Maintaining tools like keeping plates oiled is also covered.
To make M.S Plate into required model by V- fitting.
This experiment involves making a V-shaped fitting by filing, marking, sawing, and fitting two mild steel plates together. The plates are filed flat and square, then dots are punched along lines marked with dimensions for the V-shape. Unwanted material is cut using a hacksaw and chisel, then edges are filed and corners shaped to precisely fit the two plates together in a V-shape, as required.
Marking tools
The tools of technology class include marking tools like scribers, rulers, set-squares, divider compasses, punches, pencils, and markers. A scriber is used to make thin, semi-permanent marks on metalwork before machining. A graduated metal ruler measures lengths with millimeter graduations. A metal set-square has a sharpened 60° pointer used to mark points for holes. Divider compasses can inscribe circles or arcs and also measure distances. Punches are used to drive or imprint objects using a hammer. Pencils and markers contain solid pigment cores inside casings to mark without breaking or soiling hands.
He module 5
This document provides information about basic clothing and sewing tools for the first year module. It begins with a pre-test of multiple choice questions to assess knowledge of sewing tools and machine parts. It then provides details about different types of measuring, drafting, cutting, marking and sewing tools. The last section describes the main parts of a sewing machine and how to properly thread the upper and lower portions.
sewing tools
This document provides descriptions of common tools used for sewing. It describes sewing needles, pins, threads, a pincushion, tape measure, tailor's chalk, rotary cutter, scissors, thread clippers, bodkin, and French curve. The tools are used for tasks like holding fabric together temporarily, cutting fabric layers simultaneously, snipping threads, drawing elastic through casings, and shaping pattern pieces.
Lesson8
This document provides instructions for constructing 3D shapes in 4 ways: extrude, sweep, revolve, and loft. Extrude allows pushing a 2D shape out to create a 3D object. Sweep uses a profile shape moved along a path curve. Revolve spins a profile around an axis to form a 3D shape. Loft combines two or more 2D shapes into a single 3D object. Key terms are defined, like profile, intersect, and axis. Step-by-step directions are given for each construction method.
Year 10 Engineering - Lesson 5 - How To Mark Out The Spinner 2
The document provides instructions for marking out a hexagon shape on a piece of metal using common metalworking tools. It describes 5 essential tools - steel rule, dividers, scribe, centre punch, and engineer's square. It then gives a step-by-step process for using these tools to precisely mark out the points and lines of a hexagon, including applying engineer's blue, drawing center and edge lines, punching indentations at points, and using a divider to scribe arcs between points, resulting in a completely marked out hexagonal shape.
Year 10 Engineering - Lesson 5 - How To Mark Out The Spinner
The document provides step-by-step instructions for marking out a hexagonal spinner shape on a piece of metal using various tools. It describes cleaning the metal, drawing center and edge lines using a square and scribe, punching indentation marks at set intervals, using dividers to draw quarter circles connecting the marks to create the hexagon outline, and then joining the marks with lines. The overall process allows for precisely marking out the hexagonal shape for cutting.
Quality drawing
This document discusses the equipment and skills needed to create quality drawings using a drawing board. It lists drawing board equipment like parallel motion, set squares, and fixing clips. It outlines three levels of skills - being able to name equipment, describe equipment, and state the use of equipment. The levels also involve creating basic and more advanced 2D and 3D drawings, like grids and cubes of increasing accuracy. The document provides drawing exercises and asks students to identify rules and equipment for using a drawing board.
Measuring tools
This document discusses various tools used in sewing and garment construction. It describes a flexible tape measure of at least 60 inches for taking body measurements. A ruler measuring 12 or 18 inches is useful for measuring and drawing straight lines and cutting. A yardstick made of hardwood or metal is used for marking hemlines and checking grainlines. A 24" hip curve ruler can be used to create graceful curves for garment and lapel design. A French curve is a template used to draw smooth curves of varying radii, while an L-square is useful for constructing perpendicular lines.
Lesson 11
1. The document provides instructions for using patterns, grouping, hiding/showing, mirroring, and applying materials in a 3D design software. It describes how to create rectangular and circular patterns, path patterns along a spline, group objects, hide and show objects, mirror objects, and apply materials.
2. Key steps include selecting objects, using pattern tools to repeat objects in different directions or around an axis, grouping multiple objects, hiding objects by clicking the eye icon, mirroring objects across a plane, and applying materials of different colors.
3. The goal is to learn various techniques for finishing 3D designs using patterns, grouping, transformations, and materials.
What's hot (20)
Q1 wk1 d1 classification of sewing tools and materials
Q1 wk1 d1 classification of sewing tools and materials
Day 3 media and information literacy training (2D Animation)
Day 3 media and information literacy training (2D Animation)
To make M.S Plate into required model by square T-fitting.
To make M.S Plate into required model by square T-fitting.
To make M.S Plate into required model by V- fitting.
To make M.S Plate into required model by V- fitting.
Year 10 Engineering - Lesson 5 - How To Mark Out The Spinner 2
Year 10 Engineering - Lesson 5 - How To Mark Out The Spinner 2
Year 10 Engineering - Lesson 5 - How To Mark Out The Spinner
Year 10 Engineering - Lesson 5 - How To Mark Out The Spinner
Viewers also liked
Uber dan grabtaxi mana yang anda pilih
UBER dan GRABTAXI adalah dua aplikasi transportasi online populer di Indonesia. Masing-masing memiliki promo dan strategi untuk menarik pelanggan. Pilihan antara UBER atau GRABTAXI tergantung pada preferensi pengguna.
Lim grupo 2
La Unión Europea ha acordado un paquete de sanciones contra Rusia por su invasión de Ucrania. Las sanciones incluyen restricciones a los bancos rusos, la prohibición de la venta de aviones y equipos a Rusia, y sanciones contra funcionarios rusos. Los líderes de la UE esperan que las sanciones aumenten la presión económica sobre Rusia y la disuadan de continuar su agresión contra Ucrania.
Lego Robots
Jose and Jonathan built a LEGO low rider/bumper car robot that could operate on both carpet and tile surfaces. However, they struggled significantly with programming the robot and it took a long time to get it to perform the desired functions. While they faced many challenges, they learned a great deal about LEGO robotics programming and using components they were previously unfamiliar with through the process.
bosworth_matisse_lg_3
This document contains contact information for sales and press inquiries for Matisse Footwear. It lists Sheena as the contact for sales with her email and phone number. It also provides the email addresses and phone number for Hayley Antonian and Jenna Fischer to contact for press inquiries. Finally, it lists several women's names who may be relevant for the company but no additional context is provided.
11 sep china enterprises news export-oriented sm_es to face challenges in ove...
PayPal, a client based in China, was featured in an article in the China Enterprises News on September 11, 2012 discussing the challenges that small and medium-sized export businesses in China may face when expanding into overseas markets. The article was on page B02 in the Leading Enterprises section and the publication has a circulation of 50,000 readers.
Curso de gestión_ambiental
Este documento describe un curso de gestión ambiental de 100 horas cuya meta es enseñar a implementar sistemas de gestión ambiental según las normas ISO 14000. El curso consta de 14 unidades que cubren temas como conceptos básicos, desarrollo sustentable, evaluación de impactos ambientales y auditorías ambientales. Se llevará a cabo en Ambato y costará 100 USD por participante.
Final (1)
The document provides details about Sebastian Clavijo's 6-week internship at the Shanghai Nuclear Engineering Research and Design Institute. It summarizes the work completed during each week of the internship, including reading documents to understand the design of the AP1000 reactor's core and safety systems. It also describes key functions and requirements of the AP1000's residual heat removal system, emergency feedwater system, safety injection system, and safety depressurization and vent system. Finally, it provides a brief introduction to the European Pressurized Reactor design.
Consulta en clase
Este documento describe diferentes herramientas de filtrado y análisis de datos en Excel, incluyendo filtros, formato condicional, tablas dinámicas y diferentes tipos de gráficos estadísticos como gráficos de columna, línea, circulares, de barra y área. Explica cómo cada herramienta permite organizar y resumir grandes cantidades de información para facilitar su interpretación.
Grant Thornton - Improve the reliability of order book figures UK
Five ways construction companies can improve the reliability of their reported order book figures:
1. Separate orders by division and geography to identify growth areas and aid investment decisions.
2. State what percentage of the order book is secured versus unfinalized, and clarify the time period secured orders refer to for comparison between companies.
3. Separate short-term orders from long-term projects to help investors decide between long and short-term investments.
Pagamenti Digitali
Secondo una ricerca dell'Osservatorio Mobile Payment & Commerce del Politecnico di Milano la quota dei pagamenti elettronici da PC, tablet o smartphone è in continua crescita. Scopriamone il dettaglio
Peta konsep APBN
APBN merupakan anggaran tahunan pemerintah Indonesia yang mengatur perencanaan, pengorganisasian, pengawasan, alokasi, dan distribusi sumber daya ekonomi negara. APBN bertujuan untuk menyeimbangkan stabilitas ekonomi negara dalam bidang fiskal serta mengutamakan pembiayaan yang lebih bermanfaat dengan didasarkan pada kemampuan negara dan peningkatan efisiensi. APBN disusun berdasarkan UUD 1945 dan dilaksanak
NOTICIA 5ºA
Los estudiantes de 5o grado de la escuela Ceip Gloria Fuertes visitaron el yacimiento arqueológico de Mulva Munugüa para aprender más sobre la cultura romana. En el yacimiento, un guía les explicó cómo vivían los romanos que trabajaban en las minas cercanas hace 2,000 años, incluyendo sus viviendas, las termas, y los diferentes dioses a los que rezaban. La visita ayudó a los estudiantes a entender mejor lo que habían aprendido sobre la civilización romana en un viaje anterior a
Viewers also liked (20)
sertifikat kuliah umum PRECAST UNTUK BANGUNAN TINGGI
sertifikat kuliah umum PRECAST UNTUK BANGUNAN TINGGI
11 sep china enterprises news export-oriented sm_es to face challenges in ove...
11 sep china enterprises news export-oriented sm_es to face challenges in ove...
Grant Thornton - Improve the reliability of order book figures UK
Grant Thornton - Improve the reliability of order book figures UK
More from DianaPutri PuspitaDewi
Rencana pelaksanaan pembelajaran
Rencana Pelaksanaan Pembelajaran (RPP) ini membahas pembelajaran materi Teorema Pythagoras untuk siswa kelas VIII SMP Negeri 5 Palembang. RPP ini menggunakan pendekatan saintifik dengan model Problem Based Learning, dimana siswa akan dibagi menjadi kelompok untuk menyelesaikan masalah-masalah matematika berkaitan dengan Teorema Pythagoras.
Lkpd prosedur
Dokumen ini berisi tentang LKPD prosedur pelajaran matematika kelas VIII tentang bidang kartesius. Terdapat kompetensi dasar, tujuan pelajaran, dan permasalahan yang harus diselesaikan yaitu menghitung luas kolam renang berbentuk persegi panjang yang diberikan koordinat titik sudutnya. Langkah penyelesaiannya adalah menggambar kolam di bidang kartesius, menuliskan koordinat titiknya, menghitung panjang dan le
06. b.-salinan-lampiran-permendikbud-no.-68-th-2013-ttg-kurikulum-smp-m ts
Salinan Lampiran Permendikbud No.68 thn 2013 tentang Kurikulum SMP/MTs
Aplikasi komputer
Dokumen ini membahas tentang aplikasi komputer khususnya Geogebra. Dijelaskan bahwa Geogebra adalah perangkat lunak dinamis yang dapat digunakan sebagai alat bantu pembelajaran matematika seperti algebra, geometri, spreadsheet, dan grafik 3D. Kegunaan Geogebra antara lain sebagai media pembelajaran matematika dan alat bantu membuat bahan ajar serta menyelesaikan soal matematika. Juga dijelaskan tips memb
Diana1
Media adalah alat atau sarana yang dipergunakan untuk menyampaikan pesan dari komunikator kepada khalayak.
Misalnya Telepon,Televisi, Radio, Koran dan yang lainnya.
More from DianaPutri PuspitaDewi (8)
06. b.-salinan-lampiran-permendikbud-no.-68-th-2013-ttg-kurikulum-smp-m ts
06. b.-salinan-lampiran-permendikbud-no.-68-th-2013-ttg-kurikulum-smp-m ts
Recently uploaded
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Recently uploaded (20)
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Efm
- 1. Constructing a triangular Pyramid Material and Tools 1. paper 2. cut 3. glue Step of work 1. Roll a sheet of used paper parallel to its diagonal 2. Glue the end of its corner 3. Redo step 1 and step 2 until 6 rolled 4. Cut one end of 2 rolled sheets,2cm 5. Cut two end of 1 rolled sheet,2cm 6. Contruct a pyramid based on a triangle Photo or sketch Suggestion In my opinion the way to make a pyramid stand is : 1. Enter a roll that hasn’t cut into two rolls that haven cut just on the upper side with spin metode. 2. Enter two rolls that haven’t cut into the combine rolls that have made with spin metode. 3. A Roll that has cut on the top and bottom entered to be a standing flank and combined with 2 rolls that haven’t cut. 4. And finally, the pyramid has done.