Dry penetration tester
•
0 likes•76 views
晓
晓平 李Dry penetration tester is to assess the penetration resistance through barrier materials of bacteria-carrying particles. The tester is applicable for medical clothing or relative materials. It is the recommended testing instrument for determine the protective performance against dry infectious agents during the using processing of the textile or clothes above. More specification and configuration, you can find it on http://www.satatonmall.com/p/dry-microbial-penetration-resistance-tes.html
Report
Share
Report
Share
Download to read offline
Recommended
Microbial Impacts on Pharma Products & Cross Contamination
This document discusses microbial contamination and cross-contamination in pharmaceutical manufacturing. It defines cross-contamination as the presence of small quantities of other products manufactured in the same premises. The types of contamination are physical, chemical, and biological from sources like personnel, equipment, and environment. Cross-contamination can be minimized through personnel procedures, adequate facilities, closed production systems, cleaning validation, and proper air pressure differentials. Special attention needs to be given to prevent cross-contamination of beta-lactam drugs like penicillin which can cause allergic reactions in sensitive patients. FDA regulations require dedicated areas for their production to prevent sensitization issues. Personnel hygiene and housekeeping are important to control contamination.
Tds barrier 80 - english (uk) - issued.05.10.2011
Barrier 80 is a two-part zinc rich epoxy primer that complies with standards for corrosion protection. It contains a high amount of zinc and is used as a primer on blast cleaned steel to improve corrosion resistance when combined with advanced coating systems. Barrier 80 is applied by airless spray or brush at a dry film thickness of 40-90 microns and has excellent water resistance, abrasion resistance, and solvent resistance. It requires surface preparation of blast cleaning steel substrates to a minimum standard and provides corrosion protection when used in a full coating system.
Antibacterial finishing
The document discusses using aloe vera gel extract as an antibacterial finish on cotton fabrics. It explains that aloe vera gel is extracted from the plant and converted to a solvent form for application to fabrics. The treated fabrics showed 99% reduction of Staphylococcus bacteria and retained 98% antibacterial effect even after 50 washes. The conclusion is that aloe vera gel is an effective natural antimicrobial agent that can be used to finish textiles and meet consumer demand for hygienic products.
Presentation Rely+On Virkon
Presentation Rely+On Virkon.
Broad spectrum virucidal disinfectant.
Multiple applications in all sectors.
Vioxten s.r.l.s
We import and produce specialized products, medical devices and biocides characterized by the high level of technological innovation.
Antimicrobial finish on bleached cotton fabric with Aloe Vera
The document presents a study on developing antimicrobial cotton fabric treated with Aloe Vera gel. Samples were treated with solutions containing different concentrations of Aloe Vera gel and water. Testing using the parallel streak method showed that samples treated with 60% and 100% Aloe Vera gel inhibited the growth of Staphylococcus aureus, whereas untreated fabric and fabric treated with 40% gel did not. This indicates that cotton fabric treated with high concentrations of Aloe Vera gel has antimicrobial properties and can be used for medical textiles.
Anti microbial finishing
This document discusses antimicrobial finishing on apparels. It defines antimicrobial and antimicrobial agents as chemicals that prevent or inhibit microbial growth. The objectives of antimicrobial finishing on apparels are to prevent cross-infection, reduce odor formation, safeguard fabrics from staining and deterioration, and protect performance. It also discusses types of microbes, evaluation methods, where antimicrobial finishing can be applied, and types of finishes including biostats and biocides.
Antimicrobial
This document discusses various types of antimicrobial finishes for textiles. It describes two aspects of antimicrobial protection: preventing pathogenic microbes and protecting the textile itself. Problems caused by microbial growth include functional, hygienic and aesthetic issues. The document then covers the mechanisms of antimicrobial finishes including controlled release and bound mechanisms. It provides examples of specific antimicrobial chemicals and finishes like triclosan, quaternary ammonium salts, organosilver, and chitosan. Fields of application include industrial, home, and medical textiles.
Contamination control in pharmaceutical industry
Contamination control is important in the pharmaceutical industry to ensure safety and efficacy. Contaminants can make medicines toxic or transmit pathogens. Strict sterilization and containment methods are used, including laminar airflow hoods, sealed hatches, and disposable systems. Decontamination is the first step, using autoclaving, dry heat, or hydrogen peroxide vapor sterilization. Cleanrooms provide isolated ventilation to limit contamination of chemicals, biologicals, and pharmaceutical products from the environment.
Recommended
Microbial Impacts on Pharma Products & Cross Contamination
This document discusses microbial contamination and cross-contamination in pharmaceutical manufacturing. It defines cross-contamination as the presence of small quantities of other products manufactured in the same premises. The types of contamination are physical, chemical, and biological from sources like personnel, equipment, and environment. Cross-contamination can be minimized through personnel procedures, adequate facilities, closed production systems, cleaning validation, and proper air pressure differentials. Special attention needs to be given to prevent cross-contamination of beta-lactam drugs like penicillin which can cause allergic reactions in sensitive patients. FDA regulations require dedicated areas for their production to prevent sensitization issues. Personnel hygiene and housekeeping are important to control contamination.
Tds barrier 80 - english (uk) - issued.05.10.2011
Barrier 80 is a two-part zinc rich epoxy primer that complies with standards for corrosion protection. It contains a high amount of zinc and is used as a primer on blast cleaned steel to improve corrosion resistance when combined with advanced coating systems. Barrier 80 is applied by airless spray or brush at a dry film thickness of 40-90 microns and has excellent water resistance, abrasion resistance, and solvent resistance. It requires surface preparation of blast cleaning steel substrates to a minimum standard and provides corrosion protection when used in a full coating system.
Antibacterial finishing
The document discusses using aloe vera gel extract as an antibacterial finish on cotton fabrics. It explains that aloe vera gel is extracted from the plant and converted to a solvent form for application to fabrics. The treated fabrics showed 99% reduction of Staphylococcus bacteria and retained 98% antibacterial effect even after 50 washes. The conclusion is that aloe vera gel is an effective natural antimicrobial agent that can be used to finish textiles and meet consumer demand for hygienic products.
Presentation Rely+On Virkon
Presentation Rely+On Virkon.
Broad spectrum virucidal disinfectant.
Multiple applications in all sectors.
Vioxten s.r.l.s
We import and produce specialized products, medical devices and biocides characterized by the high level of technological innovation.
Antimicrobial finish on bleached cotton fabric with Aloe Vera
The document presents a study on developing antimicrobial cotton fabric treated with Aloe Vera gel. Samples were treated with solutions containing different concentrations of Aloe Vera gel and water. Testing using the parallel streak method showed that samples treated with 60% and 100% Aloe Vera gel inhibited the growth of Staphylococcus aureus, whereas untreated fabric and fabric treated with 40% gel did not. This indicates that cotton fabric treated with high concentrations of Aloe Vera gel has antimicrobial properties and can be used for medical textiles.
Anti microbial finishing
This document discusses antimicrobial finishing on apparels. It defines antimicrobial and antimicrobial agents as chemicals that prevent or inhibit microbial growth. The objectives of antimicrobial finishing on apparels are to prevent cross-infection, reduce odor formation, safeguard fabrics from staining and deterioration, and protect performance. It also discusses types of microbes, evaluation methods, where antimicrobial finishing can be applied, and types of finishes including biostats and biocides.
Antimicrobial
This document discusses various types of antimicrobial finishes for textiles. It describes two aspects of antimicrobial protection: preventing pathogenic microbes and protecting the textile itself. Problems caused by microbial growth include functional, hygienic and aesthetic issues. The document then covers the mechanisms of antimicrobial finishes including controlled release and bound mechanisms. It provides examples of specific antimicrobial chemicals and finishes like triclosan, quaternary ammonium salts, organosilver, and chitosan. Fields of application include industrial, home, and medical textiles.
Contamination control in pharmaceutical industry
Contamination control is important in the pharmaceutical industry to ensure safety and efficacy. Contaminants can make medicines toxic or transmit pathogens. Strict sterilization and containment methods are used, including laminar airflow hoods, sealed hatches, and disposable systems. Decontamination is the first step, using autoclaving, dry heat, or hydrogen peroxide vapor sterilization. Cleanrooms provide isolated ventilation to limit contamination of chemicals, biologicals, and pharmaceutical products from the environment.
Antibacterial finishes
The document discusses using herbal extracts to provide antibacterial finishes on textiles. Some key points:
1) Many plant extracts like neem, aloe vera, and clove oil contain compounds that have natural antibacterial properties and can be used as eco-friendly textile finishes.
2) Studies examined methods for applying various plant extracts to cotton fabric and evaluated the antibacterial effectiveness against common bacteria like E. coli and S. aureus using tests like agar diffusion and bacterial reduction.
3) Treatments with extracts like quercus infectoria and aloe vera gel showed good antibacterial activity against test bacteria, though washing durability was improved with mordanting agents.
Advanced absorbent filtration media for In vitro (IVD) Devices
Hahnemühle manufactures and offers absorbent filtration media with high quality and
highest purity. These media provide excellent performance and consistent reproducibility
for the manufacture of reliable In vitro Diagnostic Devices (IVDD).
Special materials have been developed for immunodiagnostic device platforms, which must
give consistent, fast and accurate results. A variety of cotton linters, cellulose and glass
fibre filters are the first choice for device manufacturers for over 30 years related to Lateral
Flow and Flow Through assays, as well as dip sticks, such as critical “Point of Care” devices.
GENERAL INTRODUCTION OF ANTIMICROBIAL FINISHES OF COTTON FABRIC
To protect from viral infections caused by pathogenic bacteria. To optimize the rate of metabolism in microbes to reduce the generation of odour. To save the quality of the textile materials from unexpected staining, fade out of color and quality deterioration.
Antibacterial Finishing Of Cotton Fabrics
You can find functionalization of antibacterial agents when applied to cotton fabrics,chloroacetate groups, bioactive carboxylic acid, antibacterial activities in these documents.
I found this documents last year while I was searching some datas about antibacterial finishes on warp kniteed blankets , and now I share with you.
Here is now.
Take it and enjoy.
Good lucks.!
Sterility assurance
This document discusses microbiology activities related to sterility assurance for pharmaceutical products. It outlines the microbiological testing done on raw materials, processes, water systems, environments and finished products. This includes bioburden testing, pathogen testing, endotoxin testing, and sterility testing. It also discusses environmental monitoring programs for sterile facilities and aseptic filling areas. Key requirements outlined include pre-filtration bioburden limits, media fill qualifications, aseptic process simulations, and staff performance monitoring. Recent issues with increased out of limit environmental monitoring results are also summarized.
Antimicrobial textile
This document discusses antimicrobial textiles and introduces Vestex, a cotton-based fabric treated with silver, cationic antimicrobials, or organosilane compounds to kill bacteria. Vestex fabrics repel fluids, resist stains, and contain antimicrobial properties to reduce bacterial transmission. The antimicrobial in Vestex punctures cell membranes and uses an electrical charge to kill microorganisms without allowing resistance. Vestex is durable, machine washable, helps keep users dry and cool, and aims to reduce healthcare-associated infections through antimicrobial uniforms and linens.
Bioburden Testing
Bioburden testing helps keep medical equipment safe for use by finding harmful microbes to eradicate during the sterilization process.
Steam sterilization monitoring
Steam sterilization monitoring involves ensuring sterilized items are free from microorganisms. The document discusses several key aspects of steam sterilization monitoring including: (1) sterility assurance levels and D-values which define sterilization effectiveness, (2) common sterilization methods like steam, gamma radiation and hydrogen peroxide, (3) methods for monitoring sterilization like mechanical, chemical and biological indicators, and (4) levels of assurance including equipment, exposure, pack and load control through proper use of indicators and record keeping. Managing a positive biological indicator requires recalling implantable items, retesting the sterilizer, and putting it back in service only after three consecutive negative retests.
Anti bacterial finish
This document discusses anti-microbial finishes for textiles. It describes how textiles can carry and support the growth of microorganisms like bacteria and fungi. It then discusses different types of microbes and how they can damage textiles by causing discoloration, stains, odors, or fiber damage. The document outlines the requirements and methods for effective anti-microbial finishes that protect both the user and the textile material from microbes. It describes two mechanisms by which anti-microbial agents can work - either through controlled release from the textile over time or by being chemically bound to the textile surface. The conclusion emphasizes the role of anti-microbial finishes in removing bacteria and parasites from materials and
Antimicrobial silver fabric By Dr Anjum Hashmi MPH
The document summarizes the history and use of silver as an antimicrobial agent. It discusses how silver damages bacterial cell walls and inhibits their growth. It then focuses on how silver-infused fabrics can help reduce healthcare-associated infections by providing continuous antimicrobial protection to surfaces like curtains, uniforms, and bedding that are difficult to properly disinfect through laundering alone. Clinical studies show silver fabrics reduce bacterial contamination on surfaces and may help reduce infection transmission between patients and staff.
Bioburden Testing 101
Bioburden Testing fulfills international standards for medical devices and pharmaceuticals by measuring the amount of living cells on a device.
Aseptic processing
The document discusses aseptic processing, which involves bringing together sterile products, containers, and closures that have been separately sterilized and assembling them in a highly controlled environment using specialized personnel and equipment. Key elements of aseptic processing include facility design and control, equipment sterilization and material handling, the aseptic processing itself, personnel training, process verification through media fills and environmental monitoring, finished product testing, and comprehensive documentation.
Good Aseptic Practices ppt
To maintain the desired SAL at the plant is task which demands great care and control over Man, Machine & Method. This summarize work will definitely help you as hand note.
Sterility tests
This document discusses sterility testing methods according to various pharmacopoeias. It provides details on membrane filtration and direct inoculation methods for testing sterility of pharmaceutical products like injections and ophthalmic preparations. These methods are based on incubating the product samples in fluid thioglycollate medium and soybean-casein digest medium to check for microbial growth. Validation of sterility testing methods and interpretation of results are also covered.
Antimicrobial finish ...
This presentation discusses antimicrobial finishes for textiles. Microbes like bacteria and fungi can grow on fabrics and cause odor, staining, and quality deterioration. Antimicrobial treatment prevents microbial growth. Methods include using antimicrobial fibers or post-treating fabrics. Common agents are quaternary ammonium compounds which are applied during pretreatment or finishing. Testing verifies the effectiveness of treatments against microbes using agar diffusion, challenge, and other standard tests. Antimicrobial textiles are important for hygiene in applications like socks, sportswear, and linens.
Aatcc 100 antimicrobial
This test method provides a quantitative procedure for evaluating the degree of antibacterial activity of finishes on textile materials. It involves inoculating test and control fabric swatches with bacteria, incubating them over different time periods, and calculating the percentage reduction in bacteria by the treated test swatches compared to the controls. Both qualitative and quantitative tests are described to determine bacteriostatic versus bactericidal activity. Safety precautions for working with bacteria and chemicals are also outlined.
VAC-V1-Gas-Permeability-Tester
VAC-V1 is applicable to the determination of gas permeability rate, solubility coefficient, diffusion coefficient and permeability coefficient at various temperature of plastic films, laminated films, sheeting, foils and finished packages, etc.
Cross contamination in Pharmaceuticals - by Jitendra J Jagtap
The document discusses cross contamination in pharmaceutical manufacturing. It states that the manufacturing environment is critical for product quality and can impact light, temperature, humidity, air movement and microbial and particulate contamination. Poorly designed or maintained air handling systems, inadequate cleaning procedures, and insufficient personnel and equipment procedures can lead to cross contamination originating from the environment, operators or equipment. Cross contamination can be minimized through skilled personnel, adequate facility design, closed production systems, validated cleaning procedures, and appropriate air pressure differentials in heating, ventilation and air conditioning systems.
Biological Safety Cabinet Operating Sequence
A simple and easy presentation on the proper sequence of events a user should take when operating a Biological Safety Cabinet from start up to shutdown.
Hospital equipments
This document discusses clean room classifications and microorganisms. It provides details on the typical microflora found in clean rooms, which includes skin bacteria like Staphylococcus and environmental bacteria like Bacillus. It also discusses particle counting standards for classifying clean rooms based on ISO and FED-STD-209E standards. The document then provides information about Airtech Equipment, a Singapore company that designs and manufactures customized clean room, bio-safety and operating room equipment for industries like healthcare, laboratories, and semiconductors.
W3 0120-Water-Vapor-Transmission-rate-Tester
The document describes the W3/0120 Water Vapor Transmission Rate Tester. It can test the water vapor transmission rate of up to 12 film or sheeting samples simultaneously under controlled temperature and humidity conditions. By measuring the weight changes of test dishes over time, it determines the water vapor permeability of materials like films, paper, textiles and medical products to ensure they meet production requirements. It provides accurate and automated measurements that conform to various industry standards.
Disinfactants
This document provides information about disinfection and sterilization. It defines key terms like disinfection, antisepsis, asepsis, and discusses the difference between antiseptics and disinfectants. It describes various physical agents for sterilization including heat, radiation, and filtration. It also covers different chemical agents used for sterilization like alcohols, chlorine compounds, formaldehyde, glutaraldehyde and hydrogen peroxide. The document provides details on different sterilization techniques and the advantages and disadvantages of various physical and chemical sterilization methods.
More Related Content
What's hot
Antibacterial finishes
The document discusses using herbal extracts to provide antibacterial finishes on textiles. Some key points:
1) Many plant extracts like neem, aloe vera, and clove oil contain compounds that have natural antibacterial properties and can be used as eco-friendly textile finishes.
2) Studies examined methods for applying various plant extracts to cotton fabric and evaluated the antibacterial effectiveness against common bacteria like E. coli and S. aureus using tests like agar diffusion and bacterial reduction.
3) Treatments with extracts like quercus infectoria and aloe vera gel showed good antibacterial activity against test bacteria, though washing durability was improved with mordanting agents.
Advanced absorbent filtration media for In vitro (IVD) Devices
Hahnemühle manufactures and offers absorbent filtration media with high quality and
highest purity. These media provide excellent performance and consistent reproducibility
for the manufacture of reliable In vitro Diagnostic Devices (IVDD).
Special materials have been developed for immunodiagnostic device platforms, which must
give consistent, fast and accurate results. A variety of cotton linters, cellulose and glass
fibre filters are the first choice for device manufacturers for over 30 years related to Lateral
Flow and Flow Through assays, as well as dip sticks, such as critical “Point of Care” devices.
GENERAL INTRODUCTION OF ANTIMICROBIAL FINISHES OF COTTON FABRIC
To protect from viral infections caused by pathogenic bacteria. To optimize the rate of metabolism in microbes to reduce the generation of odour. To save the quality of the textile materials from unexpected staining, fade out of color and quality deterioration.
Antibacterial Finishing Of Cotton Fabrics
You can find functionalization of antibacterial agents when applied to cotton fabrics,chloroacetate groups, bioactive carboxylic acid, antibacterial activities in these documents.
I found this documents last year while I was searching some datas about antibacterial finishes on warp kniteed blankets , and now I share with you.
Here is now.
Take it and enjoy.
Good lucks.!
Sterility assurance
This document discusses microbiology activities related to sterility assurance for pharmaceutical products. It outlines the microbiological testing done on raw materials, processes, water systems, environments and finished products. This includes bioburden testing, pathogen testing, endotoxin testing, and sterility testing. It also discusses environmental monitoring programs for sterile facilities and aseptic filling areas. Key requirements outlined include pre-filtration bioburden limits, media fill qualifications, aseptic process simulations, and staff performance monitoring. Recent issues with increased out of limit environmental monitoring results are also summarized.
Antimicrobial textile
This document discusses antimicrobial textiles and introduces Vestex, a cotton-based fabric treated with silver, cationic antimicrobials, or organosilane compounds to kill bacteria. Vestex fabrics repel fluids, resist stains, and contain antimicrobial properties to reduce bacterial transmission. The antimicrobial in Vestex punctures cell membranes and uses an electrical charge to kill microorganisms without allowing resistance. Vestex is durable, machine washable, helps keep users dry and cool, and aims to reduce healthcare-associated infections through antimicrobial uniforms and linens.
Bioburden Testing
Bioburden testing helps keep medical equipment safe for use by finding harmful microbes to eradicate during the sterilization process.
Steam sterilization monitoring
Steam sterilization monitoring involves ensuring sterilized items are free from microorganisms. The document discusses several key aspects of steam sterilization monitoring including: (1) sterility assurance levels and D-values which define sterilization effectiveness, (2) common sterilization methods like steam, gamma radiation and hydrogen peroxide, (3) methods for monitoring sterilization like mechanical, chemical and biological indicators, and (4) levels of assurance including equipment, exposure, pack and load control through proper use of indicators and record keeping. Managing a positive biological indicator requires recalling implantable items, retesting the sterilizer, and putting it back in service only after three consecutive negative retests.
Anti bacterial finish
This document discusses anti-microbial finishes for textiles. It describes how textiles can carry and support the growth of microorganisms like bacteria and fungi. It then discusses different types of microbes and how they can damage textiles by causing discoloration, stains, odors, or fiber damage. The document outlines the requirements and methods for effective anti-microbial finishes that protect both the user and the textile material from microbes. It describes two mechanisms by which anti-microbial agents can work - either through controlled release from the textile over time or by being chemically bound to the textile surface. The conclusion emphasizes the role of anti-microbial finishes in removing bacteria and parasites from materials and
Antimicrobial silver fabric By Dr Anjum Hashmi MPH
The document summarizes the history and use of silver as an antimicrobial agent. It discusses how silver damages bacterial cell walls and inhibits their growth. It then focuses on how silver-infused fabrics can help reduce healthcare-associated infections by providing continuous antimicrobial protection to surfaces like curtains, uniforms, and bedding that are difficult to properly disinfect through laundering alone. Clinical studies show silver fabrics reduce bacterial contamination on surfaces and may help reduce infection transmission between patients and staff.
Bioburden Testing 101
Bioburden Testing fulfills international standards for medical devices and pharmaceuticals by measuring the amount of living cells on a device.
Aseptic processing
The document discusses aseptic processing, which involves bringing together sterile products, containers, and closures that have been separately sterilized and assembling them in a highly controlled environment using specialized personnel and equipment. Key elements of aseptic processing include facility design and control, equipment sterilization and material handling, the aseptic processing itself, personnel training, process verification through media fills and environmental monitoring, finished product testing, and comprehensive documentation.
Good Aseptic Practices ppt
To maintain the desired SAL at the plant is task which demands great care and control over Man, Machine & Method. This summarize work will definitely help you as hand note.
Sterility tests
This document discusses sterility testing methods according to various pharmacopoeias. It provides details on membrane filtration and direct inoculation methods for testing sterility of pharmaceutical products like injections and ophthalmic preparations. These methods are based on incubating the product samples in fluid thioglycollate medium and soybean-casein digest medium to check for microbial growth. Validation of sterility testing methods and interpretation of results are also covered.
Antimicrobial finish ...
This presentation discusses antimicrobial finishes for textiles. Microbes like bacteria and fungi can grow on fabrics and cause odor, staining, and quality deterioration. Antimicrobial treatment prevents microbial growth. Methods include using antimicrobial fibers or post-treating fabrics. Common agents are quaternary ammonium compounds which are applied during pretreatment or finishing. Testing verifies the effectiveness of treatments against microbes using agar diffusion, challenge, and other standard tests. Antimicrobial textiles are important for hygiene in applications like socks, sportswear, and linens.
Aatcc 100 antimicrobial
This test method provides a quantitative procedure for evaluating the degree of antibacterial activity of finishes on textile materials. It involves inoculating test and control fabric swatches with bacteria, incubating them over different time periods, and calculating the percentage reduction in bacteria by the treated test swatches compared to the controls. Both qualitative and quantitative tests are described to determine bacteriostatic versus bactericidal activity. Safety precautions for working with bacteria and chemicals are also outlined.
VAC-V1-Gas-Permeability-Tester
VAC-V1 is applicable to the determination of gas permeability rate, solubility coefficient, diffusion coefficient and permeability coefficient at various temperature of plastic films, laminated films, sheeting, foils and finished packages, etc.
Cross contamination in Pharmaceuticals - by Jitendra J Jagtap
The document discusses cross contamination in pharmaceutical manufacturing. It states that the manufacturing environment is critical for product quality and can impact light, temperature, humidity, air movement and microbial and particulate contamination. Poorly designed or maintained air handling systems, inadequate cleaning procedures, and insufficient personnel and equipment procedures can lead to cross contamination originating from the environment, operators or equipment. Cross contamination can be minimized through skilled personnel, adequate facility design, closed production systems, validated cleaning procedures, and appropriate air pressure differentials in heating, ventilation and air conditioning systems.
Biological Safety Cabinet Operating Sequence
A simple and easy presentation on the proper sequence of events a user should take when operating a Biological Safety Cabinet from start up to shutdown.
Hospital equipments
This document discusses clean room classifications and microorganisms. It provides details on the typical microflora found in clean rooms, which includes skin bacteria like Staphylococcus and environmental bacteria like Bacillus. It also discusses particle counting standards for classifying clean rooms based on ISO and FED-STD-209E standards. The document then provides information about Airtech Equipment, a Singapore company that designs and manufactures customized clean room, bio-safety and operating room equipment for industries like healthcare, laboratories, and semiconductors.
What's hot (20)
Advanced absorbent filtration media for In vitro (IVD) Devices
Advanced absorbent filtration media for In vitro (IVD) Devices
GENERAL INTRODUCTION OF ANTIMICROBIAL FINISHES OF COTTON FABRIC
GENERAL INTRODUCTION OF ANTIMICROBIAL FINISHES OF COTTON FABRIC
Antimicrobial silver fabric By Dr Anjum Hashmi MPH
Antimicrobial silver fabric By Dr Anjum Hashmi MPH
Cross contamination in Pharmaceuticals - by Jitendra J Jagtap
Cross contamination in Pharmaceuticals - by Jitendra J Jagtap
Similar to Dry penetration tester
W3 0120-Water-Vapor-Transmission-rate-Tester
The document describes the W3/0120 Water Vapor Transmission Rate Tester. It can test the water vapor transmission rate of up to 12 film or sheeting samples simultaneously under controlled temperature and humidity conditions. By measuring the weight changes of test dishes over time, it determines the water vapor permeability of materials like films, paper, textiles and medical products to ensure they meet production requirements. It provides accurate and automated measurements that conform to various industry standards.
Disinfactants
This document provides information about disinfection and sterilization. It defines key terms like disinfection, antisepsis, asepsis, and discusses the difference between antiseptics and disinfectants. It describes various physical agents for sterilization including heat, radiation, and filtration. It also covers different chemical agents used for sterilization like alcohols, chlorine compounds, formaldehyde, glutaraldehyde and hydrogen peroxide. The document provides details on different sterilization techniques and the advantages and disadvantages of various physical and chemical sterilization methods.
disinfactants-210804144123 (1).pdf
This document provides information about disinfection and sterilization. It defines key terms like disinfection, antisepsis, and asepsis. It describes various physical agents for sterilization like heat, radiation, and filtration. It covers types of heat sterilization including moist and dry heat. It also discusses various chemical agents used for sterilization including alcohols, chlorine compounds, formaldehyde, glutaraldehyde and hydrogen peroxide. The document categorizes different types of filters and provides details on filtration sterilization methods.
water vapor permeability tester for flexible packaging
This instrument is based on the cup method, and is professionally applicable to the water vapor transmission rate test of film specimens. It is equipped with three individual test dishes and the testing process is completely automatic and conforms to international standards.
Water Vapor Transmission Rate Tester
This instrument is based on the humidity sensor method, and is professionally applicable to the water vapor transmission rate test of film specimens. It is equipped with three individual test dishes, and the testing process is completely automatic and conforms to international standards.
Tabletop-Autoclave.pdf
Table top autoclave is a robust and compact, space efficient unit with 20 L of capacity and a sterilizing temperature of 134 °C. It is equipped with 3 sterilizing baskets along with safety features like automatic shutoff preventing overheating of chamber, automatic cold air discharge and auto protection against raised temperature and pressure making a reliable and user friendly device.
industrial sterilization
This document discusses industrial sterilization processes on a large scale. It defines sterilization as destroying all forms of life. Sterilization is important for pharmaceutical products to eliminate contamination. Common sterilization processes include physical methods like heat and radiation, and chemical methods using gases or antimicrobial agents. Proper process selection and validation are important to ensure sterilized products meet specifications.
Sterilization Techniques.pptx
Informative presentation on Sterilization techniques - useful for Medicine & Health Science educational streams.
Telstar Pura STI Brochure
Telstar produces the Pura range of sterility test isolators, which are designed to provide an aseptic environment for sterility testing of pharmaceutical products. The isolators undergo ergonomic testing during development to prevent issues. They utilize 3D modeling software during design. Telstar focuses on technical solutions and works with clients globally. The document then describes the ionHP bio-decontamination system used with the isolators and provides details on the various Pura isolator models.
Telstar Pura STI Brochure
The document discusses Telstar's Pura range of sterility test isolators. It notes that ergonomic trials are performed early in development to prevent issues. The Pura range was developed using this process and 3D modeling software. Features of the Pura isolators include various chamber sizes, glove ports, materials suitable for hydrogen peroxide decontamination, and compliance with ISO standards for sterility testing. Benefits include reduced contamination risk and costs compared to traditional cleanrooms. Options include different decontamination systems and monitoring equipment.
Telstar Pura STI Brochure
The document discusses Telstar's Pura range of sterility test isolators. It notes that ergonomic trials are performed early in development to prevent issues. The Pura range was developed using this process and 3D modeling software. Features of the Pura isolators include various chamber sizes, glove ports, materials compatible with hydrogen peroxide sterilization, and options like monitoring sensors and shelving. The isolators are designed to avoid false positive sterility test results from contamination and provide a reliable aseptic environment.
Biosafety Cabinet Class 1 by ACMAS Technologies Pvt Ltd.
The document discusses a biosafety cabinet class 1. It is constructed of stainless steel and has a microprocessor controller that monitors airflow. It provides personnel, product, and environmental protection. It filters particles above 0.3 microns and has low noise, vibration, and power consumption. It is used in pharmaceutical, healthcare, and research applications involving bacteria, viruses, and other pathogens.
Sterilization
1) Rapid detection of bacteria is important for timely analysis in microbial testing. Methods like membrane filtration and direct epifluorescent filter technique allow rapid concentration and enumeration of microbes within 10 minutes.
2) Sterilization methods like heat, radiation, filtration, and gases aim to eliminate bacteria and viruses. Moist heat sterilization through autoclaving at 121°C is very effective. Dry heat sterilization is also used for heat-stable items.
3) Parameters like D-value, z-value, and F-value are used to define the effectiveness of sterilization methods against microbes. Proper validation and monitoring of sterilization processes is important.
Ozone climatic-test-chamber
The document describes an ozone climatic test chamber manufactured by Technocracy Pvt. Ltd. The test chamber can be used to test rubber and plastic products by simulating high ozone concentration levels along with temperature and humidity settings to evaluate the products' resistance to ozone degradation over time. Key features include a temperature range of 0-70°C, humidity of at least 65% RH, and adjustable ozone density of 50-1000pphm. The chamber uses imported components and meets various industry and regulatory standards.
Ozone climatic-test-chamber
The document describes an ozone climatic test chamber that is used to test rubber products for resistance to ozone exposure. The chamber can simulate high ozone concentration levels along with temperature and humidity settings to replicate real-world conditions. It evaluates how rubber and other materials withstand ozone aging over time in order to improve product lifespan. The chamber features a controlled environment, temperature regulation, humidity control, and an ozone generation/capture system to safely test sample materials.
W3-030-Water-Vapor-Transmission-Rate-Tester
W3/030 is based on the cup method and designed for water vapor transmission rate measurement of plastic films, laminated films, sheets as well as various materials used in medical and construction industries
Biomedical Waste Pulsation Vacuum Sterilizer by ACMAS Technologies Pvt Ltd.
Biomedical Waste Pulsation Vacuum Sterilizer by ACMAS Technologies Pvt Ltd.Acmas Technologies Pvt. Ltd.
The sterilizer is used for the sterilizing the clothes, apparatus, vessels, culture medium, small amount of liquid in the unsealed bottles. For More Information Please Logon http://goo.gl/wAAnhTValidation of sterilization methods by nilesh sharma
Validation of sterilization methods by nilesh sharmaDepartment of Pharmacy ,NIMS Institute of Pharmacy,NIMS University Rajasthan ,Jaipur.
Validation ensures that sterilization processes consistently produce sterile products. It establishes documented evidence through testing to provide a high degree of assurance that specific processes will meet quality standards. Commonly used sterilization methods include dry heat, moist heat, gases, radiation, and filtration. Moist heat sterilization using an autoclave is often validated through heat distribution studies to ensure adequate temperature is reached for a sufficient time throughout loaded chambers and containers. Validation of membrane filtration includes testing operating conditions like processing time and temperature to maintain sterility and comply with manufacturer specifications. Key microbial thermal death time concepts validated include the D-value, which is the decimal reduction time to destroy 90% of microorganisms at a given temperature, and the Z-VACUUM STERILIZER
The sterilizer is strictly designed and manufactured according to ISO 9001-2000 and ISO 13485-2003 quality system.
Tsy w3 Electrolytic Detection Method Water Vapor Permeability Tester
This instrument is professionally applicable to the determination of water vapor transmission rate of plastic films, composite films, high barrier materials, back-sheets, sheeting, aluminum foils, waterproof materials, and other materials used in sanitary and medical industry. By testing the water vapor transmission rate, the technical indexes of materials could be controlled to meet the requirements for production.
Similar to Dry penetration tester (20)
water vapor permeability tester for flexible packaging
water vapor permeability tester for flexible packaging
Biosafety Cabinet Class 1 by ACMAS Technologies Pvt Ltd.
Biosafety Cabinet Class 1 by ACMAS Technologies Pvt Ltd.
Biomedical Waste Pulsation Vacuum Sterilizer by ACMAS Technologies Pvt Ltd.
Biomedical Waste Pulsation Vacuum Sterilizer by ACMAS Technologies Pvt Ltd.
Validation of sterilization methods by nilesh sharma
Validation of sterilization methods by nilesh sharma
Tsy w3 Electrolytic Detection Method Water Vapor Permeability Tester
Tsy w3 Electrolytic Detection Method Water Vapor Permeability Tester
Recently uploaded
Butterfly Valves Manufacturer (LBF Series).pdf
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
This study Examines the Effectiveness of Talent Procurement through the Imple...
In the world with high technology and fast
forward mindset recruiters are walking/showing interest
towards E-Recruitment. Present most of the HRs of
many companies are choosing E-Recruitment as the best
choice for recruitment. E-Recruitment is being done
through many online platforms like Linkedin, Naukri,
Instagram , Facebook etc. Now with high technology E-
Recruitment has gone through next level by using
Artificial Intelligence too.
Key Words : Talent Management, Talent Acquisition , E-
Recruitment , Artificial Intelligence Introduction
Effectiveness of Talent Acquisition through E-
Recruitment in this topic we will discuss about 4important
and interlinked topics which are
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
3rd International Conference on Artificial Intelligence Advances (AIAD 2024) will act as a major forum for the presentation of innovative ideas, approaches, developments, and research projects in the area advanced Artificial Intelligence. It will also serve to facilitate the exchange of information between researchers and industry professionals to discuss the latest issues and advancement in the research area. Core areas of AI and advanced multi-disciplinary and its applications will be covered during the conferences.
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
Begin your journey to contribute to Selenium - A Talk at the Selenium Conference 2024
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
Recently uploaded (20)
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
This study Examines the Effectiveness of Talent Procurement through the Imple...
This study Examines the Effectiveness of Talent Procurement through the Imple...
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
Dry penetration tester
- 1. Dry Penetration Tester Dry penetration tester is to assess the penetration resistance through barrier materials of bacteria-carrying particles. The tester is applicable for medical clothing or relative materials. It is the recommended testing instrument for determine the protective performance against dry infectious agents during the using processing of the textile or clothes above. Standards ISO 22612 YY/T 0506.5 Feature Color touch screen for preset parameter and display. Negative pressure testing condition is safer. Built-in illumination system is convenient for observation during the test. Stainless steel chamber with double layers is heat and fire resistant. Specification Vibrating frequency 20000 per min Pressure -50~-200Pa Vibratory force 650N Air flow 158L/min HEPA ＞99.99%