The document provides specifications for pipe tool joints of various sizes, including their nominal weight, wall thickness, inner diameter, connection type dimensions, and grade. It lists specifications for different pipe sizes ranging from 2-3/8" to 6-5/8" outer diameter pipe in various steel grades.

1. Pipe Tool Joint
Size OD,
in.
Nominal
Weight,
lb/ft
Upset Type Grade
Wall
Thickness,
in.
ID,
in.
Connection
Type
OD,
in.
ID,
in.
Pin Tong
Space*,
in.
Box Tong
Space*,
in.
E-75 0.280 1.815 NC26 3-3/8 1-3/4 9 10
X-95 0.280 1.815 NC26 3-3/8 1-3/4 9 10
G-105 0.280 1.815 NC26 3-3/8 1-3/4 9 10
2-3/8 6.65 EU
S-135 0.280 1.815 NC26 3-5/8 1-3/4 9 10
E-75 0.362 2.151 NC31 4-1/8 2-1/8 9 11
X-95 0.362 2.151 NC31 4-1/8 2 9 11
G-105 0.362 2.151 NC31 4-1/8 2 9 11
2-7/8 10.40 EU
S-135 0.362 2.151 NC31 4-3/8 1-5/8 9 11
E-75 0.368 2.764 NC38 4-3/4 2-11/16 10 12-1/2
X-95 0.368 2.764 NC38 5 2-9/16 10 12-1/2
G-105 0.368 2.764 NC38 5 2-7/16 10 12-1/2
13.30 EU
S-135 0.368 2.764 NC38 5 2-1/8 10 12-1/2
E-75 0.449 2.602 NC38 5 2-9/16 10 12-1/2
X-95 0.449 2.602 NC38 5 2-7/16 10 12-1/2
G-105 0.449 2.602 NC38 5 2-1/8 10 12-1/2
3-1/2
15.50 EU
S-135 0.449 2.602 NC40 5-1/2 2-1/4 9 12
E-75 0.330 3.340 NC40 5-1/4 2-13/16 9 12
X-95 0.330 3.340 NC40 5-1/4 2-11/16 9 12
G-105 0.330 3.340 NC40 5-1/2 2-7/16 9 12
IU
S-135 0.330 3.340 NC40 5-1/2 2-7/16 9 12
E-75 0.330 3.340 NC46 6 3-1/4 9 12
X-95 0.330 3.340 NC46 6 3-1/4 9 12
G-105 0.330 3.340 NC46 6 3-1/4 9 12
4
14.00
EU
S-135 0.330 3.340 NC46 6 3 9 12
DrillPipeSpecifications
Unite Steel
www.gaslinepipe.com chuckyan@gaslinepipe.com

2. X-95 0.380 3.240 NC40 5-1/4 2-7/16 9 12
G-105 0.380 3.240 NC40 5-1/2 2-7/16 9 12
S-135 0.380 3.240 NC40 5-1/2 2 9 12
E-75 0.380 3.240 NC46 6 3-1/4 9 12
X-95 0.380 3.240 NC46 6 3-1/4 9 12
G-105 0.380 3.240 NC46 6 3-1/4 9 12
EU
S-135 0.380 3.240 NC46 6 3 9 12
E-75 0.337 3.826 NC46 6-1/4 3 9 12
X-95 0.337 3.826 NC46 6-1/4 3-1/4 9 12
G-105 0.337 3.826 NC46 6-1/4 3 9 12
IEU
S-135 0.337 3.826 NC46 6-1/4 2-3/4 9 12
E-75 0.337 3.826 NC50 6-5/8 3-3/4 9 12
X-95 0.337 3.826 NC50 6-5/8 3-3/4 9 12
G-105 0.337 3.826 NC50 6-5/8 3-3/4 9 12
16.60
EU
S-135 0.337 3.826 NC50 6-5/8 3-1/2 9 12
E-75 0.430 3.640 NC46 6-1/4 3 9 12
X-95 0.430 3.640 NC46 6-1/4 2-3/4 9 12
G-105 0.430 3.640 NC46 6-1/4 2-1/2 9 12
IEU
S-135 0.430 3.640 NC46 6-1/4 2-1/4 9 12
E-75 0.430 3.640 NC50 6-5/8 3-5/8 9 12
X-95 0.430 3.640 NC50 6-5/8 3-1/2 9 12
G-105 0.430 3.640 NC50 6-5/8 3-1/2 9 12
4-1/2
20.00
EU
S-135 0.430 3.640 NC50 6-5/8 3 9 12
E-75 0.362 4.276 NC50 6-5/8 3-3/4 9 12
X-95 0.362 4.276 NC50 6-5/8 3-1/2 9 12
G-105 0.362 4.276 NC50 6-5/8 3-1/4 9 12
5 19.50 IEU
S-135 0.362 4.276 NC50 6-5/8 2-3/4 9 12

3. X-95 0.362 4.276 5-1/2 FH 7 3-3/4 10 12
G-105 0.362 4.276 5-1/2 FH 7 3-3/4 10 12
S-135 0.362 4.276 5-1/2 FH 7-1/4 3-1/2 10 12
E-75 0.500 4.000 NC50 6-5/8 3-1/2 9 12
X-95 0.500 4.000 NC50 6-5/8 3 9 12
G-105 0.500 4.000 NC50 6-5/8 2-3/4 9 12
S-135 0.500 4.000 NC50 6-5/8 2-3/4 9 12
E-75 0.500 4.000 5-1/2 FH 7 3-1/2 10 12
X-95 0.500 4.000 5-1/2 FH 7 3-1/2 10 12
G-105 0.500 4.000 5-1/2 FH 7-1/4 3-1/2 10 12
25.60 IEU
S-135 0.500 4.000 5-1/2 FH 7-1/4 3-1/4 10 12
E-75 0.361 4.778 5-1/2 FH 7 4 10 12
X-95 0.361 4.778 5-1/2 FH 7 3-3/4 10 12
G-105 0.361 4.778 5-1/2 FH 7-1/4 3-1/2 10 12
21.90 IEU
S-135 0.361 4.778 5-1/2 FH 7-1/2 3 10 12
E-75 0.415 4.670 5-1/2 FH 7 4 10 12
X-95 0.415 4.670 5-1/2 FH 7-1/4 3-1/2 10 12
G-105 0.415 4.670 5-1/2 FH 7-1/4 3-1/2 10 12
5-1/2
24.70 IEU
S-135 0.415 4.670 5-1/2 FH 7-1/2 3 10 12
E-75 0.330 5.965 6-5/8 FH 8 5 10 13
X-95 0.330 5.965 6-5/8 FH 8 5 10 13
G-105 0.330 5.965 6-5/8 FH 8-1/4 4-3/4 10 13
25.20 IEU
S-135 0.330 5.965 6-5/8 FH 8-1/2 4-1/4 10 13
E-75 0.362 5.901 6-5/8 FH 8 5 10 13
X-95 0.362 5.901 6-5/8 FH 8-1/4 4-3/4 10 13
6-5/8
27.70 IEU
G-105 0.362 5.901 6-5/8 FH 8-1/4 4-3/4 10 13
*2" longer than standard.