Ditemsa company profile
•Download as PPT, PDF•
1 like•2,241 views
This document describes a 36-year-old tooling company with worldwide presence and over $5 million invested in machining centers. The company has 3,600 square meters of infrastructure across plants in Mexico and the USA. It specializes in designing and manufacturing tooling for aluminum and iron casting processes. Services include component design, mold layout, inspection, and engineering support.
Report
Share
Report
Share
Recommended
Portfolio Small Project Management
The document summarizes two capital projects involving the sale, installation, and facility reconfiguration for printing presses. The first project involved installing a large format printing press at the largest sheet-fed printer in the country to reduce costs by 13% and allow for expansion. 3D models were used to plan facility changes. The second project involved installing a smaller used sheet-fed press at a northern New York printer and preparing the new installation area, which was completed on time and on budget in 2 months. Both projects were completed successfully and on time.
Project report card
KMPS is requesting feedback from a customer on a recently completed project through a project report card survey. The survey asks the customer to rate various aspects of the project such as proposal development, process design, piping and layout design, major equipment, electrical and instrumentation controls, module assembly, shipment and installation, and overall project execution. The customer is asked to provide a rating from 1 to 5 and any additional comments for each section to help KMPS improve its work processes and products.
Finance for non financial personnel - part 8
Many non-financial personnel find finance is mystical and somehow cannot comprehend financial information.
The 8 parts of the presentation are designed to help the non-financial personnel to look at finance from their own view point. Instead of learn finance from finance perspective, we learn our own perspective.
This is because your goal is to improve your current work not to become a qualified accountant. Crash courses usually can’t provide sufficient knowledge for you to understand finance.
Designed from business’s viewpoint, different from other approaches found in the market. Hopefully, we can equip non-financial personnel with business driven financial knowledge.
By end of the 8 presentation:
1. You can create your value to increase financial value
2. You can interpret financial reports to make decisions
3. You know how to work on budget
4.You can propose your ideas in terms of dollars & cents
5. You produce the financial numbers that your boss likes
6. You can communicate well with finance department
7. You make collaboration with accountant possible instead of just for the sake of formality
Business Finance For Non-Financial Managers
Discover How to Use Financial Information to Make EFFECTIVE Business Decisions!
In this fast challenging business world where the emphasis is on good corporate governance and high profitability, financial awareness for Managers* is not an option, it has becomes compulsory and a necessity to stay competitive!
This course has been specially designed for managers* in the manufacturing sector who do not have a full financial training and strong finance background but whose responsibilities involve and include the following:
• Understanding his or her contribution to the company business goals, plans and profitability
• Managing and/or running the business which includes department, production, research and development, engineering and other support functions and operations
• Planning and decisions making
• Accountability for the profitability of the business, sales plan and growth, market share, department cost, cost control, expenditure and goals
• Managing credit limit and control
• Capital Budgeting and returns on investment
• Project planning
• Budgeting and forecasting
• Negotiation with Suppliers, Banks and Customers
Canadian December retail sales fall 0.5 per cent on weak autos, holiday sales
Retail sales in Canada declined in December 2016, with weaker sales reported for clothing, general merchandise, electronics and appliance, and sporting goods stores. Wages and employment in the retail and wholesale trade sector were also discussed. The report reviewed retail sales trends by province, noting declines in Ontario, Quebec, British Columbia, and Nova Scotia, while Alberta and Saskatchewan saw sales increases. Ecommerce trends in Canada were also referenced from an external source.
IFRS and FASB - Financial Instrument Reporting
This presentation looks at IFRS 9 and FASB reporting in terms of credit losses for financial instruments. The IFRS 9 is in full effect January 1, 2018 for those companies that report under IASB.
Customising user profiles in share point 2010
Having successfully configured user profile synchronization within SharePoint 2010 you may be left wondering what’s next? In this session we will go through the vast array of configuration options that are available such as:
• Creating custom user properties that can be applied to user profiles
• Creating User Sub-Types to have unique user profiles within an organization
• Creating a taxonomy of terms to be used with user profile properties
• Customizing User Profiles with additional links, pages and locations
Concrew training finance for non financial managers
This document outlines an training workshop for non-financial managers that explains basic financial concepts including accounting, financial statements like the profit and loss statement, balance sheet, and cash flow statement. The workshop teaches how to read, analyze and use these financial reports to understand business performance, and calculates key ratios to evaluate profitability, liquidity, efficiency and investments.
Recommended
Portfolio Small Project Management
The document summarizes two capital projects involving the sale, installation, and facility reconfiguration for printing presses. The first project involved installing a large format printing press at the largest sheet-fed printer in the country to reduce costs by 13% and allow for expansion. 3D models were used to plan facility changes. The second project involved installing a smaller used sheet-fed press at a northern New York printer and preparing the new installation area, which was completed on time and on budget in 2 months. Both projects were completed successfully and on time.
Project report card
KMPS is requesting feedback from a customer on a recently completed project through a project report card survey. The survey asks the customer to rate various aspects of the project such as proposal development, process design, piping and layout design, major equipment, electrical and instrumentation controls, module assembly, shipment and installation, and overall project execution. The customer is asked to provide a rating from 1 to 5 and any additional comments for each section to help KMPS improve its work processes and products.
Finance for non financial personnel - part 8
Many non-financial personnel find finance is mystical and somehow cannot comprehend financial information.
The 8 parts of the presentation are designed to help the non-financial personnel to look at finance from their own view point. Instead of learn finance from finance perspective, we learn our own perspective.
This is because your goal is to improve your current work not to become a qualified accountant. Crash courses usually can’t provide sufficient knowledge for you to understand finance.
Designed from business’s viewpoint, different from other approaches found in the market. Hopefully, we can equip non-financial personnel with business driven financial knowledge.
By end of the 8 presentation:
1. You can create your value to increase financial value
2. You can interpret financial reports to make decisions
3. You know how to work on budget
4.You can propose your ideas in terms of dollars & cents
5. You produce the financial numbers that your boss likes
6. You can communicate well with finance department
7. You make collaboration with accountant possible instead of just for the sake of formality
Business Finance For Non-Financial Managers
Discover How to Use Financial Information to Make EFFECTIVE Business Decisions!
In this fast challenging business world where the emphasis is on good corporate governance and high profitability, financial awareness for Managers* is not an option, it has becomes compulsory and a necessity to stay competitive!
This course has been specially designed for managers* in the manufacturing sector who do not have a full financial training and strong finance background but whose responsibilities involve and include the following:
• Understanding his or her contribution to the company business goals, plans and profitability
• Managing and/or running the business which includes department, production, research and development, engineering and other support functions and operations
• Planning and decisions making
• Accountability for the profitability of the business, sales plan and growth, market share, department cost, cost control, expenditure and goals
• Managing credit limit and control
• Capital Budgeting and returns on investment
• Project planning
• Budgeting and forecasting
• Negotiation with Suppliers, Banks and Customers
Canadian December retail sales fall 0.5 per cent on weak autos, holiday sales
Retail sales in Canada declined in December 2016, with weaker sales reported for clothing, general merchandise, electronics and appliance, and sporting goods stores. Wages and employment in the retail and wholesale trade sector were also discussed. The report reviewed retail sales trends by province, noting declines in Ontario, Quebec, British Columbia, and Nova Scotia, while Alberta and Saskatchewan saw sales increases. Ecommerce trends in Canada were also referenced from an external source.
IFRS and FASB - Financial Instrument Reporting
This presentation looks at IFRS 9 and FASB reporting in terms of credit losses for financial instruments. The IFRS 9 is in full effect January 1, 2018 for those companies that report under IASB.
Customising user profiles in share point 2010
Having successfully configured user profile synchronization within SharePoint 2010 you may be left wondering what’s next? In this session we will go through the vast array of configuration options that are available such as:
• Creating custom user properties that can be applied to user profiles
• Creating User Sub-Types to have unique user profiles within an organization
• Creating a taxonomy of terms to be used with user profile properties
• Customizing User Profiles with additional links, pages and locations
Concrew training finance for non financial managers
This document outlines an training workshop for non-financial managers that explains basic financial concepts including accounting, financial statements like the profit and loss statement, balance sheet, and cash flow statement. The workshop teaches how to read, analyze and use these financial reports to understand business performance, and calculates key ratios to evaluate profitability, liquidity, efficiency and investments.
Finance for non financial managers
This two-day training program will be held in Lahore on February 8-9 and in Karachi on February 11-12. The program aims to equip non-financial managers with financial skills including accounting principles, financial statement analysis, budgeting, and using financial tools for decision making. The interactive sessions will use case studies and group work. The facilitator Amir Q is an experienced chartered accountant with international training experience. The investment is Rs. 18,500 per participant with discounts for multiple registrations.
Gsb711 Lecture note 01 Introduction to Managerial Finance
An Introduction to Managerial Finance prepared for the Graduate School of Business at the University of New England. Slides prepared by Dr Subba Reddy Yarram.
BABA endterm quiz solns
The document provides the point breakdown for an endterm quiz solution including points for line items with balances, a title, totals for different sections, line items without balances, and a heading. The total points possible for the quiz solution is 35 points earned from correctly listing line items, titles, totals, and headings.
Finance 4 non financial manager - accounting principles
Finance 4 non financial manager - accounting principles
Finance For Non Finance Manager
This document advertises and provides information about a 2-day training program called "Finance for Non-Finance Managers" hosted by Foster & Bridge Indonesia. The training is designed to help managers without finance backgrounds better understand financial management principles. It will cover topics like accounting, analyzing financial statements, and budgeting. Participants will learn through lectures, exercises, discussions and real-world examples.
FINANCE FOR NON-FINANCIAL MANAGERS
This document provides an overview of an accounting training workshop. It includes:
1) Objectives of helping participants understand key financial concepts and statements and make better business decisions.
2) An outline of course contents covering accounting principles, financial statement analysis, and key metrics.
3) Examples of accounting concepts discussed like the accounting equation, revenue and expense recognition, and the purpose of financial statements.
GITMAN Chapter 1
This document provides an overview of managerial finance. It defines finance and describes the role of the financial manager. The financial manager's responsibilities include raising capital, investing funds to earn a profit, and deciding whether to reinvest profits or distribute them to investors. The document also outlines various career opportunities in finance, different forms of business organization, and the goal of maximizing shareholder wealth. It discusses the relationship between managerial finance, economics, and accounting.
Finance for Non-Financial Managers
The document discusses the question of what to do with wealth. It suggests that the only real question around wealth is how it is used. The summary conveys the core idea in the document in a concise manner in 3 sentences.
Solution for voucher entry problem
- The document contains details of various accounting transactions recorded through journal entries in the books of different proprietorship businesses. It includes transactions related to capital introduction, purchases, sales, payments, receipts and other expenses.
- The transactions are recorded in the debit and credit columns along with brief narration describing the nature of each transaction. Multiple journal entries are provided as solutions to different accounting problems.
Procurement training course -introduction to procurement
Business Services Support offers its introduction to procurement training course for buyers. Buyers learn how to procure goods and services effectively to maximise value for their organisation. Value is a concept that many are unclear about. Procurement adds value through better product development, increased customer satisfaction, improved net cash flow and profitability and much more. Our course materials help you understand the nitty gritty of effective purchasing and procurement skills.
GITMAN Chapter 2 Financial Statement Analysis
This document discusses financial statement analysis and ratio analysis. It begins by outlining the key learning goals which include understanding the four main financial statements, how to calculate and interpret various financial ratios, and using ratios to analyze a company's liquidity, activity, leverage, profitability, and market value. The rest of the document provides details on each of the four main financial statements and then demonstrates how to calculate various ratios like current ratio, quick ratio, inventory turnover, and return on equity using example financial data for a company. The purpose of ratio analysis is to assess a company's financial condition and performance.
Introduction to Managerial Finance - Chapter 1 by: Scott Besley & Eugene Brigham
This chapter introduces managerial finance concepts. It discusses the goals of finance and different forms of business organization such as proprietorships, partnerships, and corporations. The primary goal of corporations is to maximize stockholder wealth by making decisions that increase stock price through higher cash flows and lower risk. While managers' incentives may not always align with stockholders' interests, mechanisms exist to encourage ethical behavior and governance that benefits stockholders. Multinational corporations take on additional financial considerations when operating across different countries and currencies.
Finance for non finance
The document provides an overview of finance basics for managers. It covers key topics like the basics of financial management, understanding financial statements, financial analysis and decision making, and projecting financial scenarios for project management. Some key points include defining accounting and bookkeeping, explaining the purpose and limitations of financial statements like the balance sheet, income statement, and cash flow statement, discussing various financial ratios for analyzing liquidity, profitability, solvency, financial stability, and management efficiency, and introducing techniques for projecting costs and revenues of potential projects through cost benefit analysis, net present value, and return on investment.
Understanding financial statements for non-financial managers and executives
This was a presentation I delivered to a group of department heads and editors of a publishing company (specialising in scientific, technical, and medical books and journals). I've redesigned some slides in this publication.
Principles of Managerial Finance
This document provides an overview and introduction to managerial finance. It defines finance and identifies its three main areas as financial markets, financial services, and managerial finance. It also outlines seven key learning goals, such as defining finance and describing the role of the financial manager. The document discusses different business organizations, the relationship between finance, economics, and accounting. It emphasizes that the goal of a firm is to maximize shareholder wealth and examines ideas like EVA and stakeholder theory. The agency problem between managers and owners is also introduced.
financial_management_solved_problems
This document contains examples and solutions for calculating real interest rates, preparing balance sheets, cash flow statements, and financial ratios. It discusses the error in using a rule of thumb to calculate real rates compared to the correct formula. It also shows how to prepare balance sheets according to the Companies Act format, and classified cash flow statements along with the cash flow identity. Finally, it demonstrates the calculation of times interest covered, inventory turnover, and current ratios using financial information provided.
Basics of Financial Management for Non Finance Executives - Part 1
This is an introductory Session of Financial Management for Non Finance executives. it covers the basic Financial concepts and provides an overview of Financial Statements, different types of transactions and the similarities and differences between assets & expenses.
BigSys_Quickparts
The document discusses various prototyping and manufacturing services offered by a company including:
- Additive manufacturing techniques like stereolithography, selective laser sintering, and multi-jet printing to produce prototypes and low-volume parts.
- CNC machining and sheet metal fabrication for producing prototypes and higher volumes of parts requiring tight tolerances.
- Injection molding tooling and casting processes for producing metal or plastic parts in low to high volumes using molds or plaster casts.
- The company provides instant online quotes, dedicated project support, and sample materials kits to help customers determine the best process for their prototyping and manufacturing needs.
Kbx presentation stampings
KBX Engineering provides tooling design, manufacturing, and program management services. They work with tooling suppliers in Asia to design and build stamping dies and molds for industries such as automotive, appliance, and electronics. KBX handles project management, engineering support in both North America and China, and ensures projects are completed on time and on budget. Customers are encouraged to visit KBX's suppliers in Asia to see their facilities and capabilities.
Maxuni Presentation 2009
This document provides an overview of Maximum Value - Unique Service, a tool making company. It summarizes the company's services, facilities, equipment, personnel, quality systems, and expansion plans. The company offers mould design, engineering, manufacturing, and testing services. It has extensive CNC, EDM, grinding, injection molding equipment and plans to open a new factory to increase annual capacity to 2000 mould sets.
Rapid Manufacturing With Rpdg, Inc
RPDG, Inc. is a rapid prototyping company with facilities in Tijuana, Mexico, China, and California. They offer various rapid prototyping and manufacturing services including CAD/CAM machining, stereolithography, polyjet, SLS, FDM, urethane casting, sheet metal, prototype metal casting, rapid injection tooling, and short-run production. Their goal is to provide fast and economical prototyping, tooling, and low-volume production services to their customers.
Sapa NA Presentation
Sapa Extrusions is a leading North American supplier of extruded aluminum products. They have 17 plants across the US and Canada with 55 extrusion presses. Sapa offers a wide range of standard and custom extruded aluminum shapes, seamless and structural pipe and tube, and rod and bar. They provide complete solutions from raw aluminum to finished products across various markets including construction, automotive, and solar energy. Sapa has extensive fabrication, finishing, and technical support capabilities to meet customers' needs.
More Related Content
Viewers also liked
Finance for non financial managers
This two-day training program will be held in Lahore on February 8-9 and in Karachi on February 11-12. The program aims to equip non-financial managers with financial skills including accounting principles, financial statement analysis, budgeting, and using financial tools for decision making. The interactive sessions will use case studies and group work. The facilitator Amir Q is an experienced chartered accountant with international training experience. The investment is Rs. 18,500 per participant with discounts for multiple registrations.
Gsb711 Lecture note 01 Introduction to Managerial Finance
An Introduction to Managerial Finance prepared for the Graduate School of Business at the University of New England. Slides prepared by Dr Subba Reddy Yarram.
BABA endterm quiz solns
The document provides the point breakdown for an endterm quiz solution including points for line items with balances, a title, totals for different sections, line items without balances, and a heading. The total points possible for the quiz solution is 35 points earned from correctly listing line items, titles, totals, and headings.
Finance 4 non financial manager - accounting principles
Finance 4 non financial manager - accounting principles
Finance For Non Finance Manager
This document advertises and provides information about a 2-day training program called "Finance for Non-Finance Managers" hosted by Foster & Bridge Indonesia. The training is designed to help managers without finance backgrounds better understand financial management principles. It will cover topics like accounting, analyzing financial statements, and budgeting. Participants will learn through lectures, exercises, discussions and real-world examples.
FINANCE FOR NON-FINANCIAL MANAGERS
This document provides an overview of an accounting training workshop. It includes:
1) Objectives of helping participants understand key financial concepts and statements and make better business decisions.
2) An outline of course contents covering accounting principles, financial statement analysis, and key metrics.
3) Examples of accounting concepts discussed like the accounting equation, revenue and expense recognition, and the purpose of financial statements.
GITMAN Chapter 1
This document provides an overview of managerial finance. It defines finance and describes the role of the financial manager. The financial manager's responsibilities include raising capital, investing funds to earn a profit, and deciding whether to reinvest profits or distribute them to investors. The document also outlines various career opportunities in finance, different forms of business organization, and the goal of maximizing shareholder wealth. It discusses the relationship between managerial finance, economics, and accounting.
Finance for Non-Financial Managers
The document discusses the question of what to do with wealth. It suggests that the only real question around wealth is how it is used. The summary conveys the core idea in the document in a concise manner in 3 sentences.
Solution for voucher entry problem
- The document contains details of various accounting transactions recorded through journal entries in the books of different proprietorship businesses. It includes transactions related to capital introduction, purchases, sales, payments, receipts and other expenses.
- The transactions are recorded in the debit and credit columns along with brief narration describing the nature of each transaction. Multiple journal entries are provided as solutions to different accounting problems.
Procurement training course -introduction to procurement
Business Services Support offers its introduction to procurement training course for buyers. Buyers learn how to procure goods and services effectively to maximise value for their organisation. Value is a concept that many are unclear about. Procurement adds value through better product development, increased customer satisfaction, improved net cash flow and profitability and much more. Our course materials help you understand the nitty gritty of effective purchasing and procurement skills.
GITMAN Chapter 2 Financial Statement Analysis
This document discusses financial statement analysis and ratio analysis. It begins by outlining the key learning goals which include understanding the four main financial statements, how to calculate and interpret various financial ratios, and using ratios to analyze a company's liquidity, activity, leverage, profitability, and market value. The rest of the document provides details on each of the four main financial statements and then demonstrates how to calculate various ratios like current ratio, quick ratio, inventory turnover, and return on equity using example financial data for a company. The purpose of ratio analysis is to assess a company's financial condition and performance.
Introduction to Managerial Finance - Chapter 1 by: Scott Besley & Eugene Brigham
This chapter introduces managerial finance concepts. It discusses the goals of finance and different forms of business organization such as proprietorships, partnerships, and corporations. The primary goal of corporations is to maximize stockholder wealth by making decisions that increase stock price through higher cash flows and lower risk. While managers' incentives may not always align with stockholders' interests, mechanisms exist to encourage ethical behavior and governance that benefits stockholders. Multinational corporations take on additional financial considerations when operating across different countries and currencies.
Finance for non finance
The document provides an overview of finance basics for managers. It covers key topics like the basics of financial management, understanding financial statements, financial analysis and decision making, and projecting financial scenarios for project management. Some key points include defining accounting and bookkeeping, explaining the purpose and limitations of financial statements like the balance sheet, income statement, and cash flow statement, discussing various financial ratios for analyzing liquidity, profitability, solvency, financial stability, and management efficiency, and introducing techniques for projecting costs and revenues of potential projects through cost benefit analysis, net present value, and return on investment.
Understanding financial statements for non-financial managers and executives
This was a presentation I delivered to a group of department heads and editors of a publishing company (specialising in scientific, technical, and medical books and journals). I've redesigned some slides in this publication.
Principles of Managerial Finance
This document provides an overview and introduction to managerial finance. It defines finance and identifies its three main areas as financial markets, financial services, and managerial finance. It also outlines seven key learning goals, such as defining finance and describing the role of the financial manager. The document discusses different business organizations, the relationship between finance, economics, and accounting. It emphasizes that the goal of a firm is to maximize shareholder wealth and examines ideas like EVA and stakeholder theory. The agency problem between managers and owners is also introduced.
financial_management_solved_problems
This document contains examples and solutions for calculating real interest rates, preparing balance sheets, cash flow statements, and financial ratios. It discusses the error in using a rule of thumb to calculate real rates compared to the correct formula. It also shows how to prepare balance sheets according to the Companies Act format, and classified cash flow statements along with the cash flow identity. Finally, it demonstrates the calculation of times interest covered, inventory turnover, and current ratios using financial information provided.
Basics of Financial Management for Non Finance Executives - Part 1
This is an introductory Session of Financial Management for Non Finance executives. it covers the basic Financial concepts and provides an overview of Financial Statements, different types of transactions and the similarities and differences between assets & expenses.
Viewers also liked (17)
Gsb711 Lecture note 01 Introduction to Managerial Finance
Gsb711 Lecture note 01 Introduction to Managerial Finance
Finance 4 non financial manager - accounting principles
Finance 4 non financial manager - accounting principles
Procurement training course -introduction to procurement
Procurement training course -introduction to procurement
Introduction to Managerial Finance - Chapter 1 by: Scott Besley & Eugene Brigham
Introduction to Managerial Finance - Chapter 1 by: Scott Besley & Eugene Brigham
Understanding financial statements for non-financial managers and executives
Understanding financial statements for non-financial managers and executives
Basics of Financial Management for Non Finance Executives - Part 1
Basics of Financial Management for Non Finance Executives - Part 1
Similar to Ditemsa company profile
BigSys_Quickparts
The document discusses various prototyping and manufacturing services offered by a company including:
- Additive manufacturing techniques like stereolithography, selective laser sintering, and multi-jet printing to produce prototypes and low-volume parts.
- CNC machining and sheet metal fabrication for producing prototypes and higher volumes of parts requiring tight tolerances.
- Injection molding tooling and casting processes for producing metal or plastic parts in low to high volumes using molds or plaster casts.
- The company provides instant online quotes, dedicated project support, and sample materials kits to help customers determine the best process for their prototyping and manufacturing needs.
Kbx presentation stampings
KBX Engineering provides tooling design, manufacturing, and program management services. They work with tooling suppliers in Asia to design and build stamping dies and molds for industries such as automotive, appliance, and electronics. KBX handles project management, engineering support in both North America and China, and ensures projects are completed on time and on budget. Customers are encouraged to visit KBX's suppliers in Asia to see their facilities and capabilities.
Maxuni Presentation 2009
This document provides an overview of Maximum Value - Unique Service, a tool making company. It summarizes the company's services, facilities, equipment, personnel, quality systems, and expansion plans. The company offers mould design, engineering, manufacturing, and testing services. It has extensive CNC, EDM, grinding, injection molding equipment and plans to open a new factory to increase annual capacity to 2000 mould sets.
Rapid Manufacturing With Rpdg, Inc
RPDG, Inc. is a rapid prototyping company with facilities in Tijuana, Mexico, China, and California. They offer various rapid prototyping and manufacturing services including CAD/CAM machining, stereolithography, polyjet, SLS, FDM, urethane casting, sheet metal, prototype metal casting, rapid injection tooling, and short-run production. Their goal is to provide fast and economical prototyping, tooling, and low-volume production services to their customers.
Sapa NA Presentation
Sapa Extrusions is a leading North American supplier of extruded aluminum products. They have 17 plants across the US and Canada with 55 extrusion presses. Sapa offers a wide range of standard and custom extruded aluminum shapes, seamless and structural pipe and tube, and rod and bar. They provide complete solutions from raw aluminum to finished products across various markets including construction, automotive, and solar energy. Sapa has extensive fabrication, finishing, and technical support capabilities to meet customers' needs.
Additive manufacturing 1
This document discusses additive manufacturing and rapid prototyping. It outlines the objectives of using these technologies, which include increasing efficiency, providing training, and designing tools and molds. Rapid prototyping allows for design validation without investment in tooling and multiple iterations. The document then describes various rapid prototyping processes like stereolithography, selective laser sintering, 3D printing, and fused deposition modeling. It provides details on their materials, advantages, applications and areas for further research to improve these additive manufacturing techniques.
Mastars brochure(2016)
This document provides information about Mastars Industries, a manufacturing company based in China with facilities in Europe. It offers services such as design and engineering, prototyping, mold manufacturing, injection molding, CNC machining, die casting, metal injection molding, and assembly. It produces parts for industries such as automotive, lighting, medical, aerospace, and others. The document outlines Mastars' capabilities and quality control processes.
Maxuni Presentation 2009 Eu
This document summarizes Maximum Value - Unique Service, a tool making company based in China. It provides excellent quality tool making following European standards with short lead times. It has 270 employees across design, engineering, manufacturing, and other functions. The company aims to expand with new facilities and an American office.
CPS Presentation - 2016
This document provides an overview of Complete Prototype Services, Inc., a company that offers prototyping and limited production services. It discusses that CPS is a privately owned company incorporated in 1995 that has 8 facilities and over 350 employees. It details the various services CPS offers, including plastics molding, sheet metal work, fixtures and gauges production, and program management. CPS aims to ensure quality and uses an ERP system called Global Shop to manage projects from start to finish.
Ts industries overview ver 5
Total Solution Industries is a global manufacturing solutions provider headquartered in Raleigh, NC that was founded in 1987. It has manufacturing facilities in Shenzhen, China and provides services including injection molding, compression molding, casting, and stamping dies to customers in industries such as medical devices. The company utilizes a proprietary project management portal and state-of-the-art manufacturing technologies to deliver high quality molds on time at a competitive price through seamless global communications between its teams and customers.
HEADS-PROFILE
Heads was established in 2010 to provide high-end advanced design solutions for mechanical engineering projects. It offers services like 3D modeling, 2D drawings, and fabrication. Some of its clients include Airvent Technologies, Canara Projects, Centum Industries, and IISC Bangalore. Heads has successfully executed projects like slant bed turning machine guards, HT panel boards, drying machine frames, and industrial machinery components. Its goal is to continually improve its processes and systems through modern technology to build long-term client relationships.
Maxuni Presentation 2009 Us New
This company presentation provides an overview of Maxuni, a mold manufacturing company with offices in China, Germany, and plans to open an office in North America. It summarizes Maxuni's international team, projects, customers, facilities, equipment, processes, and key metrics such as 2008 sales and employee numbers. Maxuni aims to provide high quality molds for automotive and packaging industries using automated manufacturing systems and international project management.
Maxuni Presentation 2009 Us New
This company presentation provides an overview of Maxuni, a mold manufacturing company with offices in China, Germany, and plans to open an office in North America. It summarizes Maxuni's international team, sales and production figures from 2008, facilities and automated manufacturing capabilities, and customer industries served which include automotive and packaging. Maxuni aims to provide high quality molds on schedule through their engineering, manufacturing, and quality control processes.
Intent Design Rapid Prototyping R2 Info Sheet
The document describes Intent Design's new Rapid Prototype system which provides several advantages over other 3D printing technologies. It has the fastest build speed at 5-10x faster, the lowest cost per system and per part printed, and is the world's only full-color 3D printer with 24-bit color and 16 million color palette. The system offers versatility, ease of use, speed, low cost, and full color capabilities. It can produce parts for various applications faster and at lower costs than traditional methods.
QTI_Mechanical Design
Quality Tool provides mechanical and industrial design services as well as contract manufacturing of metal products. They have two facilities in South Dakota and Minnesota. They specialize in sheet metal enclosures, chassis design, mechanism design, plastic design, electro-mechanical design, bus bar design, and design for manufacturability. Quality Tool works with companies as a design partner from concept through production. They also provide quick-turn prototyping and production verification. Several case studies are presented showing Quality Tool's work on projects such as an electronic enclosure, DFM analysis, CFD/thermal analysis, rivets, latches and levers, an electro-mechanical design, and a coordinate measuring machine.
Cast designer for investment casting design & simulation
Cast-Designer is a casting design and analysis software that uses upfront design and analysis technology. This allows engineers to conduct simulations early in the design process to optimize designs and detect potential issues. The software generates quick simulations to check designs for issues with metal flow, heat transfer, cooling, and solidification. It aims to help users achieve better designs and time to market goals.
TS industries Overview ver 8
Tooling machinery requires molds, dies, and fixtures of various kinds to create the products we use every day. We can supply you with high quality tooling at cost effective prices and with short lead-times. We are a North Carolina Corporation and support you in your tooling requirements.
Process Systems & Design, Inc. Capabilities
Complete design, layout, engineering and drafting services for any project you may have in progress or in the planning phase.
Creo 8.0 subtractive manufacturing what's new
The document introduces the Creo 5-Axis Mold Machining Extension being added in Creo 8, which will provide new HSM 5-Axis Rough and Rest Rough toolpaths for subtractive manufacturing to simplify 5-axis programming and enable both 3+2-axis and 5-axis roughing strategies with automatic collision checking and various scan types and slicing options. The extension aims to reduce programming time and improve machining efficiency for mold and die work as well as other complex parts.
Plastpro mf presentation_may2016-updated for design
This document summarizes Plast-Pro Solutions' Moldflow CAE and design services. It outlines their resources including dedicated Moldflow analysis engineers and commercial Moldflow licenses. It describes Moldflow capabilities like gate optimization and various analysis types. The Moldflow analysis process and developed methodologies are explained. Design services including CAD support are also listed. Finally, two case studies are summarized showing how Moldflow analysis helped solve issues and improve parts.
Similar to Ditemsa company profile (20)
Cast designer for investment casting design & simulation
Cast designer for investment casting design & simulation
Plastpro mf presentation_may2016-updated for design
Plastpro mf presentation_may2016-updated for design
Recently uploaded
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Recently uploaded (20)
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Ditemsa company profile
- 3. Customer focused organization 36 years of tooling experience Operating 24/7 Big capacity for large projects and fast response
- 4. Worldwide presence from our plants in Mexico and USA with support in Europe and the Far East. 3,600 sq. m. of operational infrastructure and offices
- 7. 36 years of experience Designing & Manufacturing Tooling for: Aluminum SPM, LPM, HPDC Aluminum Core Package System (CPS) Grey Iron Greensand Molding Hot and Coldbox coreboxes Fixtures & assembly aids
- 8. Strong knowledge of all Foundry processes for grey Iron and Aluminum casting. Sand pack development & Mold Studies Rapid Prototype Tooling
- 11. More than $5m investment in state of the art 4 and 5 axes HSM machining centres
- 12. High tech locating and clamping system giving accurate location plus fast set up
- 13. Through Spindle Cooling (TSC) for efficient and accurate machining of all hole work
- 14. Latest CMM and Photo Scanning (GOM) inspection and reverse engineering hardware and software
- 17. Component Design from 2D Print Initial tooling layouts for customer approval Complete mold and fixture design Modification of existing designs to incorporate engineering changes to existing molds Design and project management support on all programs
- 18. Large CNC and Crane capacity to support engineering changes and maintenance to existing tooling, large or small
- 19. Reverse engineering by GOM scanning and modeling back into a 3D system
- 20. Close location to North American Foundries giving fast response to engineering changes, breakdowns and technical reviews
- 23. A multi-cultural English Speaking management team with many years experience in the Foundry and Tooling industry holding key positions throughout the company
- 24. Skilled design team offering a full service to our customers
- 25. Project Leaders tracking and supporting all projects providing a link between us and our customers
- 26. Skilled work force in all areas of manufacture with experience above 20 years
- 27. www.ditemsa.com.mx Blvd. Luis Echeverría 1280, Saltillo, Coahuila, México CP 25240 Tel (+52) 844 438-6200 Fax (+52) 844 415-2588 Sales Fax (+52) 844 416-4097 email: sales@ditemsa.com