Data and computer communication exam ll
•Download as DOCX, PDF•
0 likes•973 views
This document contains 18 multiple choice questions from a data and computer exam related to networking concepts like LAN data rates, medium access control protocols, throughput calculations on bus networks, probabilities of failures in ring networks, contention in LANs, frame sizes and transmission times using different MAC protocols, error detection using CRC, ARQ protocols, and sliding window flow control. It provides the questions and potential multiple choice answers but not the explanations or workings.
Report
Share
Report
Share
Recommended
Data and computer communication exam lll
This document contains 11 multiple choice questions about data and computer networks. The questions cover topics like calculating the number of slots on a slotted ring network, efficiency of bus, CSMA/CD and token ring networks, applications of wireless LANs, ATM network architectures, and properties of Ethernet LANs including the relationship between efficiency and the "a" parameter value.
Data and computer communication exam i
This document contains a multiple choice exam with questions about computer networks, data transmission, and network topologies. Question 1 asks about the time required to transmit a long message from computer A to C via computer B. Question 2 asks about the minimum total cable length required to connect devices in offices on different floors using a star topology network. Question 3 asks about calculating end-to-end delay for circuit switching.
Jaimin chp-3 - data-link layer- 2011 batch
The document discusses data link layer services and functions including:
1. Providing interfaces between network layers and framing/error control/flow control.
2. Types of services include unacknowledged/acknowledged connectionless and connection-oriented.
3. Framing methods like character count, flag bytes, and encoding violations are used to delineate frames. Error control uses acknowledgments, timers, and sequence numbers.
Data Link Layer
Data Link Layer
The main goal of this layer is providing reliability to the layers above it.
3.1 DLL Design Issues
What are the services provided by DLL?
3.2 Error Detection and Correction
Adding redundancy in order to find and correct errors.
3.3 DLL Protocols
xxx
3.4 Sliding Window Protocols
xxx
3.5 Protocol Specification and Verification
xxx.
3.6 Examples
Ch12
This document provides an overview of multiple access protocols for shared wireless media. It discusses random access protocols like ALOHA, slotted ALOHA, CSMA, CSMA/CD, and CSMA/CA. ALOHA protocols allow stations to transmit whenever they have data, which can cause collisions. Slotted ALOHA and CSMA protocols reduce collisions by coordinating transmissions. The document also covers controlled access protocols like reservation, polling, and token passing that establish transmission rights to avoid collisions. It includes frame formats, throughput calculations, and flow diagrams to illustrate how each protocol manages access to the shared channel.
The Data Link Layer
Lecture slides from the 3rd-year module on Computer Networks at the University of Birmingham, UK.
This presentation covers the Data-Link layer of the networks stack, primarily Error Control, Flow Control and Framing.
TOKEN BUS & TOKEN RING.ppt
The document discusses IEEE 802 subgroups and local area network (LAN) technologies such as token bus and token ring. It provides details on:
- IEEE 802 subgroups and their responsibilities for various networking standards
- How token passing works on token bus and token ring networks, with stations passing a token frame that allows the holder to transmit data
- Standards such as IEEE 802.4 for token bus and IEEE 802.5 for token ring
- Key aspects of token ring and token bus networks, including frame formats, priority schemes, and how data is transmitted and errors are handled.
Recommended
Data and computer communication exam lll
This document contains 11 multiple choice questions about data and computer networks. The questions cover topics like calculating the number of slots on a slotted ring network, efficiency of bus, CSMA/CD and token ring networks, applications of wireless LANs, ATM network architectures, and properties of Ethernet LANs including the relationship between efficiency and the "a" parameter value.
Data and computer communication exam i
This document contains a multiple choice exam with questions about computer networks, data transmission, and network topologies. Question 1 asks about the time required to transmit a long message from computer A to C via computer B. Question 2 asks about the minimum total cable length required to connect devices in offices on different floors using a star topology network. Question 3 asks about calculating end-to-end delay for circuit switching.
Jaimin chp-3 - data-link layer- 2011 batch
The document discusses data link layer services and functions including:
1. Providing interfaces between network layers and framing/error control/flow control.
2. Types of services include unacknowledged/acknowledged connectionless and connection-oriented.
3. Framing methods like character count, flag bytes, and encoding violations are used to delineate frames. Error control uses acknowledgments, timers, and sequence numbers.
Data Link Layer
Data Link Layer
The main goal of this layer is providing reliability to the layers above it.
3.1 DLL Design Issues
What are the services provided by DLL?
3.2 Error Detection and Correction
Adding redundancy in order to find and correct errors.
3.3 DLL Protocols
xxx
3.4 Sliding Window Protocols
xxx
3.5 Protocol Specification and Verification
xxx.
3.6 Examples
Ch12
This document provides an overview of multiple access protocols for shared wireless media. It discusses random access protocols like ALOHA, slotted ALOHA, CSMA, CSMA/CD, and CSMA/CA. ALOHA protocols allow stations to transmit whenever they have data, which can cause collisions. Slotted ALOHA and CSMA protocols reduce collisions by coordinating transmissions. The document also covers controlled access protocols like reservation, polling, and token passing that establish transmission rights to avoid collisions. It includes frame formats, throughput calculations, and flow diagrams to illustrate how each protocol manages access to the shared channel.
The Data Link Layer
Lecture slides from the 3rd-year module on Computer Networks at the University of Birmingham, UK.
This presentation covers the Data-Link layer of the networks stack, primarily Error Control, Flow Control and Framing.
TOKEN BUS & TOKEN RING.ppt
The document discusses IEEE 802 subgroups and local area network (LAN) technologies such as token bus and token ring. It provides details on:
- IEEE 802 subgroups and their responsibilities for various networking standards
- How token passing works on token bus and token ring networks, with stations passing a token frame that allows the holder to transmit data
- Standards such as IEEE 802.4 for token bus and IEEE 802.5 for token ring
- Key aspects of token ring and token bus networks, including frame formats, priority schemes, and how data is transmitted and errors are handled.
3a data link layer
The document discusses data link layer protocols:
1. It describes the main functions of the data link layer including data link control, framing, error control, flow control, and media access control.
2. It introduces the Stop-and-Wait ARQ, Go-Back-N ARQ, and Selective Repeat ARQ protocols which combine framing, flow control, and error control to deliver data from one node to another over noisy channels.
3. It explains how these protocols use sequence numbers, sliding windows, and acknowledgments to provide flow and error control.
Asynchronous transfer mode
The document discusses Asynchronous Transfer Mode (ATM) networking. It describes the issues driving changes to local area networks, including supporting different types of traffic like voice, video, and data. It then provides details on the ATM standard and conceptual model, including its connection-oriented nature and use of virtual paths and channels. The document also examines the ATM protocol architecture, including the different ATM adaptation layers used to package data for transmission over ATM networks.
Lan technologies
The document discusses Ethernet networking technologies. It describes how Ethernet was developed in the 1970s and standardized. It outlines the evolution of Ethernet speeds from 2Mbps to 1Gbps. It discusses the physical layer standards for 10BaseT, 100BaseT, 1000BaseT, and 10GBase networking. It also provides an overview of Token Ring and FDDI technologies, including their operation, standards, and key features.
Data link layer
The document discusses the data link layer of the OSI model. It has two sublayers: the Media Access Control (MAC) sublayer and the Logical Link Control (LLC) sublayer. The data link layer is responsible for error-free transmission over the physical layer through functions like framing, error control using techniques like parity checking and cyclic redundancy checks, flow control using methods like stop-and-wait and sliding windows, and physical addressing using protocols like Ethernet, HDLC, Frame Relay, and devices like bridges and switches.
Computer Networks Unit 2 UNIT II DATA-LINK LAYER & MEDIA ACCESS
The document discusses data link layer framing and protocols. It describes:
1) Two main approaches to framing - byte-oriented (using sentinel characters) and bit-oriented (using bit stuffing). Protocols discussed include BISYNC, DDCMP, and HDLC.
2) Features of PPP framing including negotiated field sizes and use of LCP control messages.
3) Functions of data link layer including framing, flow control, error control, and media access control. The relationship between the logical link control and media access control sublayers is also covered.
Ccn unit-2- data link layer by prof.suresha v
The document discusses the data link layer of the OSI model. It covers topics such as:
- Framing methods including character-oriented, bit-oriented, and byte stuffing
- Flow control and error control functions of the data link layer
- Common data link layer protocols including simplex and stop-and-wait
Ethernet
Ethernet uses CSMA/CD access method where nodes can sense carrier and detect collisions. It was first defined in 1978 and formed basis for IEEE 802.3 standard. It uses exponential backoff to retry transmission after collisions and is limited to 2500m to ensure collisions can be detected. Ethernet addresses are unique to each adapter and frames contain fields for source, destination, data and error checking.
Introduction to the Data Link Layer
This document discusses error detection and correction techniques at the data link layer. It covers block coding methods like parity checks and cyclic redundancy checks that add redundant bits to detect errors. Parity checks use a single redundant bit to detect single-bit errors. Cyclic redundancy checks are error detecting codes based on cyclic codes that use a polynomial representation. Checksums are also discussed as an error detection method that adds data segments and checks the resulting sum.
Lecture3 Physical Layer
The document discusses various topics related to transmission media and the physical layer of the OSI model. It describes guided media like twisted pair cable, coaxial cable, and fiber optic cable. It also discusses unguided transmission using radio waves and microwaves. It explains how signals are transmitted over different media and modulation techniques. It provides details on telephone systems, multiplexing, and how fiber optic networks have replaced older copper networks.
Chapter 4 data link layer
The data link layer, or layer 2, is the second layer of the seven-layer OSI model of computer networking. This layer is the protocol layer that transfers data between adjacent network nodes in a wide area network (WAN) or between nodes on the same local area network (LAN) segment.
Chapter 10
This document summarizes error detection and correction techniques. It discusses types of errors like single-bit errors and burst errors. It covers basic concepts of error detection, including adding redundant bits and using techniques like parity checks. Error correction requires knowing the number and positions of errors. Linear block codes and cyclic codes are introduced. Hamming distance and minimum distance are important metrics for error detection and correction capability. Specific codes like parity codes, Hamming codes, and cyclic redundancy checks (CRCs) are described through examples.
Classless subnetting
This document discusses subnetting and provides examples to illustrate the concept. Subnetting is the process of dividing a larger network into smaller subnets by borrowing bits from the host portion of the IP address. This does not increase the number of available hosts but rather allows the network to be divided for better management and traffic control. The document uses an analogy of dividing a barrel of apples into smaller barrels to represent how subnetting works, showing that you still have the same number of apples but distributed across more barrels. Several examples are then provided to demonstrate how to determine the subnet address, range of host addresses, number of subnets and hosts per subnet given an IP address, network mask and subnet mask.
wired lans
The document discusses the evolution of Ethernet standards over four generations from its creation in 1976. It describes the IEEE 802 project which established standards for LAN communication. The original Ethernet standard defined the data link layer to consist of logical link control (LLC) and media access control (MAC) sublayers. It also established physical layer standards and frame formats for early Ethernet implementations using thick and thin coaxial cable and twisted pair wiring in bus and star topologies. Later changes like bridging and switching increased bandwidth and separated collision domains to support higher data rates.
Chapter 20
This document provides an overview of Internet Protocol version 4 (IPv4) and version 6 (IPv6). It discusses the need for a network layer in an internetwork, the key components and functioning of IPv4 including packet structure, fragmentation, and checksum calculation. It then covers the advantages of IPv6 over IPv4 and the differences in packet format and extension headers between the two protocols. Finally, it discusses the challenges of transitioning from IPv4 to IPv6 and different transition strategies like running both protocols simultaneously, tunneling, and header translation.
Token bus
The document discusses Token Bus, which combines features of Ethernet and Token Ring. It operates as a physical bus but with stations logically organized into a ring, passing a token among them. Only the station holding the token can transmit data. Token Bus was limited to industrial applications and saw no commercial use for data communication. It uses the token passing mechanism over a physical bus topology at the data link layer.
Arp and rarp
This document discusses ARP and RARP protocols. ARP is used to map IP addresses to MAC addresses on local networks. It works by broadcasting ARP requests and unicasting replies. RARP is used in the opposite direction, to map a device's MAC address to its IP address. Examples are given of how an ARP cache works, including entries for pending, resolved, and free states. RARP has been replaced by BOOTP and DHCP for providing additional configuration info like subnet masks.
Unit 3 Network Layer PPT
The document discusses network layer concepts including packet switching, IP addressing, and fragmentation. It provides details on:
- Packet switching breaks data into packets that are routed independently and reassembled at the destination. This allows for more efficient use of bandwidth compared to circuit switching.
- IP addresses in IPv4 are 32-bit numbers that identify devices on the network. Addresses are expressed in decimal notation like 192.168.1.1. Fragmentation breaks packets larger than the MTU into smaller fragments for transmission.
Cs8591 u4
UNIT IV TRANSPORT LAYER 9
Introduction – Transport Layer Protocols – Services – Port Numbers – User Datagram Protocol – Transmission Control Protocol – SCTP.
Topic : X.25, Frame relay and ATM
These slides cover a topic on X.25, Frame relay and ATM in Data Communication. All the slides are explained in a very simple manner. It is useful for engineering students & also for the candidates who want to master data communication & computer networking.
Data transmission media
Digital Data Transmission Medium of Digital Networks and Telecommunications describing every aspects, advantages and disadvantages of the ways of transferring information between sender and receiver.
Performance analysis of collision alleviating distributed coordination functi...
This document presents a Collision Alleviating DCF (CAD) protocol to enhance the performance of the IEEE 802.11 Distributed Coordination Function (DCF) in congested wireless networks. It proposes CAD to reduce contention among nodes and avoid channel capture effects by introducing an inter-packet backoff delay. The document also designs an exact Markov chain model to evaluate the performance of CAD and predicts it will outperform DCF particularly when the number of competing nodes is large, with over a 10% reduction in collision probability.
Multiple Access ppt in Object Oriented Programming
This document discusses multiple access protocols for sharing a communication channel between multiple stations. It covers both random access protocols like ALOHA and slotted ALOHA, and controlled access protocols like polling, token passing, and reservation. It also discusses channelization protocols for sharing bandwidth, including Frequency-Division Multiple Access (FDMA), Time-Division Multiple Access (TDMA), and Code-Division Multiple Access (CDMA). FDMA divides the channel into frequency bands, TDMA divides it into time slots, and CDMA allows all stations to transmit simultaneously using unique coding. The document provides detailed explanations, examples, diagrams and equations for each protocol.
More Related Content
What's hot
3a data link layer
The document discusses data link layer protocols:
1. It describes the main functions of the data link layer including data link control, framing, error control, flow control, and media access control.
2. It introduces the Stop-and-Wait ARQ, Go-Back-N ARQ, and Selective Repeat ARQ protocols which combine framing, flow control, and error control to deliver data from one node to another over noisy channels.
3. It explains how these protocols use sequence numbers, sliding windows, and acknowledgments to provide flow and error control.
Asynchronous transfer mode
The document discusses Asynchronous Transfer Mode (ATM) networking. It describes the issues driving changes to local area networks, including supporting different types of traffic like voice, video, and data. It then provides details on the ATM standard and conceptual model, including its connection-oriented nature and use of virtual paths and channels. The document also examines the ATM protocol architecture, including the different ATM adaptation layers used to package data for transmission over ATM networks.
Lan technologies
The document discusses Ethernet networking technologies. It describes how Ethernet was developed in the 1970s and standardized. It outlines the evolution of Ethernet speeds from 2Mbps to 1Gbps. It discusses the physical layer standards for 10BaseT, 100BaseT, 1000BaseT, and 10GBase networking. It also provides an overview of Token Ring and FDDI technologies, including their operation, standards, and key features.
Data link layer
The document discusses the data link layer of the OSI model. It has two sublayers: the Media Access Control (MAC) sublayer and the Logical Link Control (LLC) sublayer. The data link layer is responsible for error-free transmission over the physical layer through functions like framing, error control using techniques like parity checking and cyclic redundancy checks, flow control using methods like stop-and-wait and sliding windows, and physical addressing using protocols like Ethernet, HDLC, Frame Relay, and devices like bridges and switches.
Computer Networks Unit 2 UNIT II DATA-LINK LAYER & MEDIA ACCESS
The document discusses data link layer framing and protocols. It describes:
1) Two main approaches to framing - byte-oriented (using sentinel characters) and bit-oriented (using bit stuffing). Protocols discussed include BISYNC, DDCMP, and HDLC.
2) Features of PPP framing including negotiated field sizes and use of LCP control messages.
3) Functions of data link layer including framing, flow control, error control, and media access control. The relationship between the logical link control and media access control sublayers is also covered.
Ccn unit-2- data link layer by prof.suresha v
The document discusses the data link layer of the OSI model. It covers topics such as:
- Framing methods including character-oriented, bit-oriented, and byte stuffing
- Flow control and error control functions of the data link layer
- Common data link layer protocols including simplex and stop-and-wait
Ethernet
Ethernet uses CSMA/CD access method where nodes can sense carrier and detect collisions. It was first defined in 1978 and formed basis for IEEE 802.3 standard. It uses exponential backoff to retry transmission after collisions and is limited to 2500m to ensure collisions can be detected. Ethernet addresses are unique to each adapter and frames contain fields for source, destination, data and error checking.
Introduction to the Data Link Layer
This document discusses error detection and correction techniques at the data link layer. It covers block coding methods like parity checks and cyclic redundancy checks that add redundant bits to detect errors. Parity checks use a single redundant bit to detect single-bit errors. Cyclic redundancy checks are error detecting codes based on cyclic codes that use a polynomial representation. Checksums are also discussed as an error detection method that adds data segments and checks the resulting sum.
Lecture3 Physical Layer
The document discusses various topics related to transmission media and the physical layer of the OSI model. It describes guided media like twisted pair cable, coaxial cable, and fiber optic cable. It also discusses unguided transmission using radio waves and microwaves. It explains how signals are transmitted over different media and modulation techniques. It provides details on telephone systems, multiplexing, and how fiber optic networks have replaced older copper networks.
Chapter 4 data link layer
The data link layer, or layer 2, is the second layer of the seven-layer OSI model of computer networking. This layer is the protocol layer that transfers data between adjacent network nodes in a wide area network (WAN) or between nodes on the same local area network (LAN) segment.
Chapter 10
This document summarizes error detection and correction techniques. It discusses types of errors like single-bit errors and burst errors. It covers basic concepts of error detection, including adding redundant bits and using techniques like parity checks. Error correction requires knowing the number and positions of errors. Linear block codes and cyclic codes are introduced. Hamming distance and minimum distance are important metrics for error detection and correction capability. Specific codes like parity codes, Hamming codes, and cyclic redundancy checks (CRCs) are described through examples.
Classless subnetting
This document discusses subnetting and provides examples to illustrate the concept. Subnetting is the process of dividing a larger network into smaller subnets by borrowing bits from the host portion of the IP address. This does not increase the number of available hosts but rather allows the network to be divided for better management and traffic control. The document uses an analogy of dividing a barrel of apples into smaller barrels to represent how subnetting works, showing that you still have the same number of apples but distributed across more barrels. Several examples are then provided to demonstrate how to determine the subnet address, range of host addresses, number of subnets and hosts per subnet given an IP address, network mask and subnet mask.
wired lans
The document discusses the evolution of Ethernet standards over four generations from its creation in 1976. It describes the IEEE 802 project which established standards for LAN communication. The original Ethernet standard defined the data link layer to consist of logical link control (LLC) and media access control (MAC) sublayers. It also established physical layer standards and frame formats for early Ethernet implementations using thick and thin coaxial cable and twisted pair wiring in bus and star topologies. Later changes like bridging and switching increased bandwidth and separated collision domains to support higher data rates.
Chapter 20
This document provides an overview of Internet Protocol version 4 (IPv4) and version 6 (IPv6). It discusses the need for a network layer in an internetwork, the key components and functioning of IPv4 including packet structure, fragmentation, and checksum calculation. It then covers the advantages of IPv6 over IPv4 and the differences in packet format and extension headers between the two protocols. Finally, it discusses the challenges of transitioning from IPv4 to IPv6 and different transition strategies like running both protocols simultaneously, tunneling, and header translation.
Token bus
The document discusses Token Bus, which combines features of Ethernet and Token Ring. It operates as a physical bus but with stations logically organized into a ring, passing a token among them. Only the station holding the token can transmit data. Token Bus was limited to industrial applications and saw no commercial use for data communication. It uses the token passing mechanism over a physical bus topology at the data link layer.
Arp and rarp
This document discusses ARP and RARP protocols. ARP is used to map IP addresses to MAC addresses on local networks. It works by broadcasting ARP requests and unicasting replies. RARP is used in the opposite direction, to map a device's MAC address to its IP address. Examples are given of how an ARP cache works, including entries for pending, resolved, and free states. RARP has been replaced by BOOTP and DHCP for providing additional configuration info like subnet masks.
Unit 3 Network Layer PPT
The document discusses network layer concepts including packet switching, IP addressing, and fragmentation. It provides details on:
- Packet switching breaks data into packets that are routed independently and reassembled at the destination. This allows for more efficient use of bandwidth compared to circuit switching.
- IP addresses in IPv4 are 32-bit numbers that identify devices on the network. Addresses are expressed in decimal notation like 192.168.1.1. Fragmentation breaks packets larger than the MTU into smaller fragments for transmission.
Cs8591 u4
UNIT IV TRANSPORT LAYER 9
Introduction – Transport Layer Protocols – Services – Port Numbers – User Datagram Protocol – Transmission Control Protocol – SCTP.
Topic : X.25, Frame relay and ATM
These slides cover a topic on X.25, Frame relay and ATM in Data Communication. All the slides are explained in a very simple manner. It is useful for engineering students & also for the candidates who want to master data communication & computer networking.
Data transmission media
Digital Data Transmission Medium of Digital Networks and Telecommunications describing every aspects, advantages and disadvantages of the ways of transferring information between sender and receiver.
What's hot (20)
Computer Networks Unit 2 UNIT II DATA-LINK LAYER & MEDIA ACCESS
Computer Networks Unit 2 UNIT II DATA-LINK LAYER & MEDIA ACCESS
Similar to Data and computer communication exam ll
Performance analysis of collision alleviating distributed coordination functi...
This document presents a Collision Alleviating DCF (CAD) protocol to enhance the performance of the IEEE 802.11 Distributed Coordination Function (DCF) in congested wireless networks. It proposes CAD to reduce contention among nodes and avoid channel capture effects by introducing an inter-packet backoff delay. The document also designs an exact Markov chain model to evaluate the performance of CAD and predicts it will outperform DCF particularly when the number of competing nodes is large, with over a 10% reduction in collision probability.
Multiple Access ppt in Object Oriented Programming
This document discusses multiple access protocols for sharing a communication channel between multiple stations. It covers both random access protocols like ALOHA and slotted ALOHA, and controlled access protocols like polling, token passing, and reservation. It also discusses channelization protocols for sharing bandwidth, including Frequency-Division Multiple Access (FDMA), Time-Division Multiple Access (TDMA), and Code-Division Multiple Access (CDMA). FDMA divides the channel into frequency bands, TDMA divides it into time slots, and CDMA allows all stations to transmit simultaneously using unique coding. The document provides detailed explanations, examples, diagrams and equations for each protocol.
CN R16 -UNIT-4.pdf
The document discusses medium access control (MAC) sublayer protocols. It describes Pure ALOHA and Slotted ALOHA protocols, which allow multiple users to share a broadcast channel. It then covers Carrier Sense Multiple Access (CSMA) protocols, including persistent and non-persistent CSMA. Exponential backoff is introduced as a way to reduce collisions in CSMA. Finally, it summarizes CSMA/CA used in wireless LANs where collisions are detected by acknowledgements rather than carrier sensing.
07 data linkcontrol
The document discusses data link control protocols and HDLC. It introduces the need for data link protocols to manage frame exchange over a link, including flow control, error control, and addressing. It describes various flow and error control mechanisms like stop-and-wait, sliding windows, go-back-N, and selective reject ARQ. It also provides details on the HDLC frame structure and operation, including address fields, control fields, information fields, and the exchange of different frame types during initialization, data transfer, and disconnection.
Ch 11
The document discusses various data link control protocols and HDLC frame formats. It covers topics like flow control, error control using automatic repeat request (ARQ), and different ARQ protocols including stop-and-wait, go-back-N, and selective repeat. It provides examples of how these protocols operate and calculates link utilization for different scenarios. It also discusses HDLC frame structures, types and fields, and the use of bit stuffing to ensure reliable data transmission.
Chapter 11: Data Link Control
The document discusses data link control and framing in computer networks. It describes two main functions of the data link layer: defining frames and performing error detection on frames. It also discusses different types of framing such as fixed-size framing and variable-size framing using character-oriented and bit-oriented protocols. Specific protocols discussed include Stop-and-Wait ARQ which uses positive acknowledgments and retransmissions, and Go-Back-N ARQ which allows for pipelining of multiple frames before requiring an acknowledgment.
ch12.ppt
This document discusses multiple access protocols for shared wireless channels. It begins by describing random access protocols like ALOHA and carrier sense multiple access (CSMA). It provides examples of calculating throughput for these protocols. The document then covers controlled access protocols, including reservation, polling, and token passing. It describes how each protocol works and provides illustrations. Finally, it states that channelization is a multiple access technique for dividing a channel into several sub-channels.
Topic5
The document discusses medium access control (MAC) protocols for wireless ad-hoc networks. It describes several MAC protocols including the Five Phase Reservation Protocol (FPRP) and Distributed Wireless Ordering Protocol (DWOP). FPRP uses a five phase process for distributed reservation of time slots. DWOP aims to provide fair channel access that approximates a first-in-first-out scheduling order by sharing packet arrival times between nodes. The document evaluates these protocols and discusses their advantages in providing quality of service guarantees and fair scheduling in wireless ad-hoc networks.
Mncs 16-08-3주-변승규-opportunistic flooding in low-duty-cycle wireless sensor ne...
opportunistic flooding in low-duty-cycle wireless sensor networks with unreliable links
Shuo Guo, Tian He
Media Access Control (MAC Layer)
Media Access Control, Random access, ALOHA, CSMA,CSMA/CD,CSMA/CA, Controlled access, Channelization, FDMA,TDMA,CDMA, MAC layer
note9.ppt
1. Random access protocols like ALOHA and slotted ALOHA allow wireless stations to transmit randomly, which can cause collisions and reduce throughput. Carrier sensing multiple access (CSMA) protocols reduce collisions by having stations sense the channel before transmitting. (2 sentences)
2. Scheduling-based medium access control protocols like reservation and polling systems organize transmissions to avoid collisions. Reservation systems use minislots for stations to request transmission slots in future frames. Polling systems have a central controller or token that polls stations in a set order to transmit. (3 sentences)
note_vc.ppt
1. Random access protocols like ALOHA and slotted ALOHA allow wireless stations to transmit randomly, which can cause collisions and reduce throughput. Carrier sensing multiple access (CSMA) protocols reduce collisions by having stations sense the channel before transmitting. (2 sentences)
2. Scheduling-based medium access control protocols like reservation and polling systems organize transmissions to avoid collisions. Reservation systems use reservation intervals for stations to request transmission slots, while polling systems have a central controller or passing permit poll stations in a set order. Both approaches can provide more efficient channel utilization than random access. (3 sentences)
Jaimin chp-4 - media access sub-layer- 2011 batch
The document discusses MAC protocols for broadcast networks. It covers topics like CSMA, CSMA/CD, and how they work. It explains assumptions like the collision model and how protocols determine channel access. It also compares the performance of different protocols in terms of channel utilization and delay under varying load levels. Collision-free protocols are more efficient at high loads while contention-based protocols have lower delay at low loads.
MacProtocols2.ppt
The ALOHA Protocol uses a "free for all" approach where stations transmit whenever they have a frame ready. If the transmitting station does not receive an ACK within a specified time, it will resend the frame after a random wait. It will retry sending for a number of times before giving up. Slotted ALOHA improves performance over pure ALOHA by restricting transmissions to specific time slots. Carrier Sense Multiple Access (CSMA) reduces collisions by having stations sense the channel before transmitting. CSMA with Collision Detection (CSMA/CD) allows stations to detect collisions faster and abort transmissions, improving efficiency for networks with propagation delays close to the minimum frame size.
16 high speedla-ns
This document discusses high-speed local area networks (LANs) including Fast and Gigabit Ethernet. It describes how LAN usage has evolved from basic connectivity to supporting large file transfers and graphics-intensive applications. It also outlines some key applications that require high-speed LANs like centralized server farms and power workgroups. The document then reviews different LAN technologies like Ethernet, token ring, and wireless and how carrier sense multiple access with collision detection (CSMA/CD) works. It concludes by discussing Fast Ethernet specifications and how Gigabit Ethernet differs.
16 high speedla-ns
This document discusses high-speed local area networks (LANs). It describes how LAN traffic and needs have increased with more powerful PCs and graphics-intensive applications. Applications that require high-speed LANs include centralized server farms and power workgroups that transfer large data files. Common high-speed LAN technologies discussed include Fast and Gigabit Ethernet, Fibre Channel, and high-speed wireless LANs.
Multiple Access Techniques
This document discusses multiple access techniques used in wireless networks. It covers both random access techniques like Aloha, CSMA, and CSMA/CD as well as controlled access techniques like reservation, polling, and token passing. For random access, it describes the basic protocols for each and how they work to allow multiple nodes to share a channel. It also discusses concepts like carrier sensing, collision detection, and backoff algorithms used to reduce collisions. For controlled access, it provides overviews of how reservation and polling methods coordinate channel access.
AIU_CN_2.pptx
This document summarizes multiple access protocols used in computer networks at the data link layer. It discusses random access protocols like CSMA/CD and CSMA/CA that allow nodes to transmit randomly. It also covers controlled access protocols like reservation, polling, and token passing that require nodes to get permission before transmitting. Finally, it describes channelization techniques for sharing bandwidth, including FDMA, TDMA, and CDMA that divide the channel by frequency, time, or code respectively.
Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Details : Me...
Media Access Protocol (MAC)
Carrier Sense Multiple Access With Collision Detection (CSMA/CD)
Definition
Introduction
Features
Principle
Flowchart
Collision Mechanism
COLLISION DETECTION METHODS
Slot Time
Non-Persistent CSMA/CD
Efficiency
Advantages
Disadvantages
Detail Discussion with Mathematical Formula
Similar to Data and computer communication exam ll (20)
Performance analysis of collision alleviating distributed coordination functi...
Performance analysis of collision alleviating distributed coordination functi...
Multiple Access ppt in Object Oriented Programming
Multiple Access ppt in Object Oriented Programming
Mncs 16-08-3주-변승규-opportunistic flooding in low-duty-cycle wireless sensor ne...
Mncs 16-08-3주-변승규-opportunistic flooding in low-duty-cycle wireless sensor ne...
Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Details : Me...
Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Details : Me...
Recently uploaded
Gender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdWhat is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Recently uploaded (20)
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Data and computer communication exam ll
- 1. Data and Computer Exam 2 Question 1 A LAN has a data rate of 4 Mbps and a propagation delay between two stations at opposite ends of 20us. For what range of PDU sizes does stop-and-wait give an efficiency of at least 70%. A simple medium access control protocol would be to use a fixed assignment Time Division Multiplexing (TDM) scheme. Each station is assigned one time slot per cycle for transmission. For the bus, the length of each slot is the time to transmit 100 bits plus the end-to-end propagation delay. Stations monitor all time slots for reception. Assume a propagation time of 200000000 m/s. For N stations, what is the throughput per station for a 1-km, 10-Mbps baseband bus? Answer: 6.67 x 10^6N Question 3 System A consists of a single ring with 60 stations, one per repeater. If the probability of a link failure is Pl, a repeater failure is Pr, and a bridge failure is Pb, Assuming Pr=Pl=Pb=0.01, What is Probability of failure of system A Answer: 0.70 Question 4 System B consists of four 15-station rings linked by a bridge. If the probability of a link failure is Pl, a repeater failure is Pr, and a bridge failure is Pb, Assuming Pr=Pl=Pb=0.01, What is Probability of complete failure of system B Answer: 0.004591 Question 5 3 / 5 points A disadvantage of the contention approach for LANs is the capacity wasted due to multiple stations attempting to access the channel at the same time. Suppose that time is divided into discrete slots, with each of N = 8 stations attempting to transmit with probability P = 0.10 during each slot. What fraction of slots are wasted due to multiple simultaneous transmission attempts? Answer: 0.52, 0.18 Question 6 5 / 5 points If it takes 25 micro seconds to send a frame using the pure ALOHA method, then the vulnerable time is ……………. Answer: 373 bits Question 2
- 2. 12.5 micro seconds 50 ms 25 micro seconds 50 micro seconds Question 7 A network using the CSMA random access method with P equal to 0.25 will refrain from sending …………percent of the time after accessing an idle line. 25 50 75 100 Question 8 In the p-persistent approach, when a station finds an idle time, it……………………. Waits a time equal to the propagation time before sending Waits a time equal to the frame transmission time before sending Sends with probability p Sends immediately Question 9 The 1-persistent approach can be considered a special case of the P-persistent approach with a P equal to………… 0.1 0.5 1.0 2.0
- 3. Question 10 …………………..is a controlled access method. Slotted ALOHA Pure ALOHA CSMA/CD Token passing Question 11 At the CRC checker, if the remainder is…………………., then the data unit is damaged. A string of 0s A string of 1s A string of alternating 1s and 0s Not a string of 0s Question 12 In go-back-n ARQ, if frames 4, 5, and 6 are received successfully, the receiver may send an ACK…………….to the sender. 4 5 6 7 Question 13 In stop and-wait ARQ, if data 1 has an error, the receiver sends a ……….frame. NAK 0 NAK 1 NAK 2 NAK
- 4. Question 14 In sliding window flow control (window size of 7), an ACK 3 means the receiver next expects frame …………. 2 3 4 8 Question 15 In sliding window protocol the left wall of the sender sliding window moves to the ……………….. when it ……………….a data frame. right; receives right; sends left; receives left; sends Question 16 The following numbers are used in a sliding window protocol: 0, 1, 2, 3, 4, 5, 6, and 7. The window size is ………. 6 7 8 9 Question 17 If the data unit is 1010101010101010 and the remainder is 1001, what is the dividend at the receiver? 10101010101010100000 10101010101010101010 10101010101010101001
- 5. 1010101010101010 Question 18 The throughput is 10 kbps. How long does it take to send 2000 bits? 0.2 2 200 2000