Tapan Kumar Prusty is an instrumentation engineer with over 5 years of experience in project execution, commissioning, and maintenance for power, energy, oil, and gas sectors. He is currently a senior instrumentation engineer at Fabtech Projects And Engineers Limited. He holds a B.Tech in Applied Electronics & Instrumentation Engineering and has experience monitoring instrumentation installation, coordinating project meetings, developing estimates, and sharing technical knowledge with project teams. He is proficient in DCS systems like Foxboro, Yokogawa, and Honeywell and knowledgeable in industry codes. He is seeking a results-oriented position where he can utilize his skills and continue advancing his career.

1. TAPAN KUMAR PRUSTY E-Mail: prustytapan@ymail.com
( Instrumentation Engineer) Mob. No: +91-9776782450
: +91-7504991550
A position in a results-oriented company that seeks an ambitious and career-conscious person, where
acquired skills and education will be utilized towards continued growth and advancement.
PROFESSIONAL SNAPSHOT
 An Engineering Graduate with an enquiring mind having 5.10+ yrs of experience in
Project Execution ,commissioning and maintenance pertaining to Power, Energy ,
oil and gas sectors.
 Currently working with Fabtech Projects And Engineers Limited as Lead
Instrumentation Engineer from Dec. 2014 to till date.
SCHOLASTICS
 B.TECH. (Applied Electronics & instrumentation Engg.)from Institute of Technical
Education & Research (ITER), Bhubaneswar, Orissa during session 2010 with 81%.
 Senior Secondary in science from Orissa Board(CHSE) with 70%.
 Higher Secondary from Orissa Board(BSE) with 80.40%.
SKILL ENHANCEMENT SCHEDULE
1. Organization Fabtech Projects and Engineers Limited , pune
Responsibilities:-
 Monitor and inspection of works activities regarding instrument installation, tubing, cabling,
trays, conduits , JB & Marshalling, Console Desk installation etc.
 Coordination/weekly progress review meetings with project management Consultants & client.
 Develop and maintain labor and material estimates for project’s execution and commissioning.
 Shares technical knowledge with project team , supervisor , own discipline and other
engineering disciplines.
 Cable laying, gland & termination, cold loop check as per cable schedule and point database.
Site Description-2: Intermediate Storage Tanks and Transfer facilities , Alkylate
Mounded Bullets, H2 compressor and Bullet, MS Blending project
at Indian Oil Corporation Limited (IOCL),Paradip Refinery. The
scope of work is undertaken by Fabtech Projects & Engineers Ltd.
under PMC, JACOBS Engineering India Pvt. Limited with Design
Engineering and technology being provided by Chemtex India
PVt. Ltd .
Site Description-1: Sulphur Recovery unit at Hindustan Petroleum Corporation
Limited(HPCL) , Visakhapatnam. The project comprises a Sulphur
Recovery Unit (SRU), Tail Gas Treatment Unit (TGTU), Amine
Regeneration Unit (ARU) and Fuel Gas Amine Treatment Unit
(FGATU). The scope of work is undertaken by Chemtex in
consortium with Fabtech Projects & Engineers Ltd. under PMC
TOYO Engineering India Limited with technology being provided by
Worley Parsons, USA.
Job Profile Project execution, Commissioning & Maintenance
Designation Senior Instrumentation Engineer.
Period Dec- 2014 – Present Date

2.  Impulse piping hook- up , instrument air line and tubing as per PMS for field instruments.
 Loop checking ,Interlocks checking and commissioning of all ESD and DCS loops of fire & Gas
control systems , Field instruments and control system , tank firm management system ,
Boiler management system as per Cause & Effect matrix.
 Attending engineering issues and contacting vendor for resolution.
 Review & recommendation of Field Engineering documents like PI&Ds, Instrument data sheets,
Hook Ups , Instrument Mounting, Instrument Layouts, point database & cable schedule.
 Prepare as built drawings as per site changes and getting approved from project management
consultant.
 Project documentation work for Instrumentation activities such as IMIR, Calibration Report,
Loop Check report, Interlocks report , ITPs ( Instruments , JBs, panels, Pc console , Trays,
tubings ) , Hook up & fit up reports , Hydro test report , leak test reports , Stroke checking,
Installation and meggar Report etc.
 Familiar with FCS connections from Field till the Engineering Station and HIS panel.
 Familiar with Invensys FOXBORO I/A Series , Yokogawa centum Vp series , TRICONEX safety
shutdown systems and Honeywell CP300 series DCS systems for process control.
 Ensures that the engineered solution meets project requirements in terms of functionality,
standards, quality, and supporting documentation and implementation process at minimum
cost for allocated work assignments.
 Ensures that required pre-requisites (e.g. design inputs , tools , manpower and
documentation) are in place prior to commencing work
 Erection and commissioning of MS Blending system for Euro-4 petrol (Vendor – Honeywell &
ABB) in large refinery.
 Erection, commissioning and SAT of TGS (Tank Gauging System, make- Honeywell-Enraaf).
 Erection, commissioning and SAT of Rim Seal Fire Protection System to achieve MB LAL
recommendations for OISD norms. Make- Vimal Fire .
 Knowledge on Foundation Fieldbus Technology.
 Testing and commissioning of plant control valves, MOV s , On-Off valves , XZVs and ROVs.
 Testing and calibration of plant measurement circuits, pressure, temperature, level, flow,
speed, position and vibration probes.
 Knowledge of industry codes and standards applicable to Oil and Gas and Refining Industries
(API, ISA , OISD, ASME etc.) and preferably also FOSTER WHEELER standards and working
practices.
 Responsible for adherence to HSE Policy and Guidelines.
2. Organization ANI Instruments pvt.Limited, mumbai
Site Description SASAN POWER LIMITED ,A 6*660 MW
SUPERCRITICALultra mega power project, situated at sasan
,singrauli,m.p ,a unit of RELIANCE POWER LIMITED.

3. Responsibilities:-
Commissioning and Maintenance of reliance power 6*660 MW SUMPP
 Testing, calibration and maintenance of plant measurement circuits, pressure, temperature,
level, flow, speed, position and vibration probes.
 Refurbishment, dismantle and assembling of various control valves and their calibration as per
specification (Make - ABB, FISHER, METSO & YTC smart Positioner.)
 Turbine HP and LP bypass oil skid commissioning and maintenance work.
 Commissioning and maintenance of all the Mill system of PFBC corner fired boiler including
lube oil system.
 Weigh bridge and Coal feeder calibration and maintenance work , make- SPERI ,China
 Commissioning of all the PA,FD& ID fan with lube oil system.
 SADC system, SOFA damper and burner management system(Local burner control cabinet),
flame scanner and MFT interlock checking .
 MFT interlock checking of Boiler and Turbine.
 Flame TV camera , Furnace Temp Probe and Boiler Metal Temperature commissioning work.
 Protocol preparation and verification of interlock.
 Rotork, AI/MI motorized valve commissioning and maintenance work.
 Worked with ABB,FISHERS , METSO & YTC smart positioner.
 MDBFP AND TDBFP commissioning work ,Commissioning and maintenance of Field
Instruments, Turbine Supervisory Instruments etc
 Familiar with FCS connections from Field till the Engineering Station and HIS Panel.
 Familiar with Invensys Foxboro I/A Series DCS.
 Boiler Tube Leakage Detector Commissioning and maintenance work.
3. Organization MaaDurga Thermal power company Limited,Bainchua, Cuttack
Responsibilities :-
 Reviewing of P&IDs, Control write up, Logics etc.
 Commissioning of ups system 2*30 KVA emersion pulse system.
Job Profile Commissioning & Maintenance
Designation Commissioning Engineer(C&I)
Period Dec. 2013- Dec. 2014
Description MTPCL is a producer of Thermal Power which is situated in the
heart of Orissa. It comprises of 60MW(2*30mw)Independent
Power plants.
Job Profile Project Execution And Commissioning.
Designation Graduate Engineer Trainee – Asst. Engineer(C&I)
Period July 2010 – Nov 2013

4.  Erection of DCS, yokogawa, centum vp r 4.0.
 Commissioning of water treatment plant , make-Ion exchange limited.
 Responsible for installation and commissioning of field instruments such as temperature,
pressure, flow, level- transmitters and switches.
 Fixing and Checking of Proximity sensor Vibration probes (Make: Bently Neveda).
TRAINING & ACHIEVEMENT
 30 days Training on Real Time PLC (Siemens- simatic manager) at Central Tool &
Training centre (CTTC), Bhubaneswar, Orissa.
PERSONAL INFORMATION
Sex : Male
Marital Status : Married.
Father's name : Gobinda Chandra Prusty
Mother’s name : Smt. Purnima Prusty
Languages Proficiency : Hindi, English, Oriya
Permanent Address : At/Po- Bachhol, Via- Mashara, Dist. Jajpur, Orissa
Current CTC : 6.0 Lacs pa
Preferred Location : Any Where in India
Joining Date : Immediate
Official notice period : 01 month
Willing to Relocate : Yes
Passport Number/ status : K4994816/Valid up to 2023
DECLARATION
I do hereby declare that the information furnished by me is true to the best of my knowledge .
Place: Paradeep, Odisha Signature:
Date: 01/07/2016 Tapan Kumar Prusty