The document provides information about PT Quamaxindo Utama, an Indonesian engineering company established in 2006. It details the company's address, leadership, divisions, health and safety policies, capabilities in areas like tank construction, piping systems and cement plants. It also lists several completed and ongoing projects for clients in the oil, gas and mining industries, demonstrating experience in fabrication, construction and commissioning.
Onoghenero Onoyeyan is seeking a highly motivated and result oriented role. He has over 5 years of experience in sales, marketing, and operations. His most recent role was as a Turbine Operator at Atmospheric Gases Limited, where he monitored equipment and recorded operational data. Prior to that, he worked in marketing for Sterling Bank and completed his NYSC with Doland Resource and Services coordinating safety inspections. Onoghenero holds a B.Eng in Petroleum Engineering from University of Port Harcourt and has attended several training programs in areas such as money laundering prevention, HSE appreciation, and leadership.
PT Borneo Persada Internasional provides mechanical, electrical, fabrication and general supply services. It was established in 2005 and operates workshops in Balikpapan. The company serves customers in oil/gas, mining and other industries. It offers fabrication, piping installation, equipment rental, and general supplies. PT Borneo Persada Internasional aims to be a world-class provider of mechanical and electrical services through experienced staff and a focus on safety, quality and technology.
This document provides information about PT Quamaxindo Utama, an Indonesian engineering and construction company. It was established in 2006 and is located in Jakarta. The company has experience in oil, gas, and petrochemical engineering projects. It has completed projects for clients like Pertamina, Bosowa, and ConocoPhillips. Current ongoing projects include fuel storage infrastructure for a coal mining site in Central Kalimantan.
Dokumen ini memberikan informasi tentang Izine Usaha Jasa Konstruksi (IUJK) yang dipersyaratkan bagi perusahaan konstruksi dan konsultan, serta menjelaskan kualifikasi perusahaan ke dalam golongan kecil, menengah dan besar berdasarkan sub bidangnya. Diberikan pula informasi kontak dari Amarta Consulting untuk pertanyaan lebih lanjut.
Solution is a recruitment firm established in 2006 that offers a range of recruitment services including permanent placements, contract staffing, executive search, and training programs. They specialize in recruiting for the building services industry with a focus on mechanical, electrical, and public health engineering. The firm prides itself on building long-term relationships with clients through transparency, communication, and a thorough candidate screening process.
PT. Bentang Buana Sukses is an engineering and service provider in Indonesia founded in 2014. Their vision is to become the number one service provider in Indonesia by giving excellent service and technology solutions to customers. Their core competencies include installations and maintenance of base transceiver stations, fiber optic networks, VSAT systems, broadband wireless access, and more. They have experience providing these types of services since 2012 to various telecommunications companies across Indonesia.
The document provides information about PT Quamaxindo Utama, an Indonesian engineering company established in 2006. It details the company's address, leadership, divisions, health and safety policies, capabilities in areas like tank construction, piping systems and cement plants. It also lists several completed and ongoing projects for clients in the oil, gas and mining industries, demonstrating experience in fabrication, construction and commissioning.
Onoghenero Onoyeyan is seeking a highly motivated and result oriented role. He has over 5 years of experience in sales, marketing, and operations. His most recent role was as a Turbine Operator at Atmospheric Gases Limited, where he monitored equipment and recorded operational data. Prior to that, he worked in marketing for Sterling Bank and completed his NYSC with Doland Resource and Services coordinating safety inspections. Onoghenero holds a B.Eng in Petroleum Engineering from University of Port Harcourt and has attended several training programs in areas such as money laundering prevention, HSE appreciation, and leadership.
PT Borneo Persada Internasional provides mechanical, electrical, fabrication and general supply services. It was established in 2005 and operates workshops in Balikpapan. The company serves customers in oil/gas, mining and other industries. It offers fabrication, piping installation, equipment rental, and general supplies. PT Borneo Persada Internasional aims to be a world-class provider of mechanical and electrical services through experienced staff and a focus on safety, quality and technology.
This document provides information about PT Quamaxindo Utama, an Indonesian engineering and construction company. It was established in 2006 and is located in Jakarta. The company has experience in oil, gas, and petrochemical engineering projects. It has completed projects for clients like Pertamina, Bosowa, and ConocoPhillips. Current ongoing projects include fuel storage infrastructure for a coal mining site in Central Kalimantan.
Dokumen ini memberikan informasi tentang Izine Usaha Jasa Konstruksi (IUJK) yang dipersyaratkan bagi perusahaan konstruksi dan konsultan, serta menjelaskan kualifikasi perusahaan ke dalam golongan kecil, menengah dan besar berdasarkan sub bidangnya. Diberikan pula informasi kontak dari Amarta Consulting untuk pertanyaan lebih lanjut.
Solution is a recruitment firm established in 2006 that offers a range of recruitment services including permanent placements, contract staffing, executive search, and training programs. They specialize in recruiting for the building services industry with a focus on mechanical, electrical, and public health engineering. The firm prides itself on building long-term relationships with clients through transparency, communication, and a thorough candidate screening process.
PT. Bentang Buana Sukses is an engineering and service provider in Indonesia founded in 2014. Their vision is to become the number one service provider in Indonesia by giving excellent service and technology solutions to customers. Their core competencies include installations and maintenance of base transceiver stations, fiber optic networks, VSAT systems, broadband wireless access, and more. They have experience providing these types of services since 2012 to various telecommunications companies across Indonesia.
This document provides a summary of RatnaPertiwi's education and work experience. It outlines that she graduated from Bina Nusantara University in 2016 with a GPA of 3.33 in Management. It also lists several internships and roles she held with student organizations at her university, including roles in event planning, research assistance, and medical support. Contact information is provided at the end.
Dokumen tersebut merupakan bagian pendahuluan dari laporan penyusunan rencana tata ruang wilayah Kabupaten Muna Barat yang mencakup latar belakang CV. Tri Tehnik Konsultan sebagai konsultan pelaksana, lingkup layanan, pengalaman kerja, personalia, organisasi perusahaan.
Company Profile PT Goe Tech Indonesia Karawangbadar masbadar
Cara Membuat Company Profile Cara membuat corporate profile yang baik Cara Mendesain Profile Company Profesional Company Profile PT GOE-Tech INDONESIA Engineering Karawang Contoh Company Profile Kreatif Identity Branding Jasa Desain Print Cetak Company Profile KIIC Suryacipta Jababeka BSC Karawang Bekasi. Perusahaan Engineering Karawang Perusahaan General Trading Karawang Tips Kreatif Desain Bisnis Profile
Billing rate-konsultan -20091008141045__2178__0_2Ismed Nur
Surat edaran bersama ini memberikan petunjuk penyusunan Rencana Anggaran Biaya (RAB) untuk jasa konsultansi yang terdiri dari Biaya Langsung Personil dan Biaya Langsung Non Personil. Biaya Langsung Personil meliputi gaji, tunjangan, dan keuntungan, sedangkan Biaya Langsung Non Personil meliputi biaya perjalanan, akomodasi, dan pengeluaran lainnya. Surat ini menetapkan formula perhitungan dan ketentuan untuk kedua komp
Achievement consulting company profile 2012 r1Arie Mulyawan
Achievement Consulting is a business consulting firm focused on people development in Indonesia. Its vision is to develop human resources for the nation. The company offers various services including recruitment and assessment, people development programs like training, and consultancy. It has a team of experienced facilitators with expertise in areas like human resources, assessment, training, and motivation. The company aims to be the best and most trustworthy partner for clients' people development needs.
Dokumen tersebut berisi informasi tentang profil perusahaan konsultan CV. Madani Callysta Saibuyun yang memberikan jasa layanan di berbagai bidang seperti penelitian, telematika, pendidikan dan pelatihan, serta memiliki pengalaman kerja lebih dari 10 tahun terakhir bekerja sama dengan berbagai instansi pemerintah.
PT. Inovasi Akses Global (IAG) Consulting is an Indonesian consulting firm that provides services in events, corporate communications, content creation, and training. It was founded in 2012 as Jakarta Brainstorm focusing on procurement, and later expanded its services and changed its name to better serve clients' evolving needs. IAG Consulting aims to be a leading strategic partner for businesses through innovative solutions and a one-stop shop approach. It works with major Indonesian and international companies across industries.
01 hap4 4-space - Hourly Analysis Program - CarrierMonzer Salahdine
This document provides an overview of the capabilities of Carrier's HAP 4.4 HVAC design and energy analysis software. It describes the two main operating modes in HAP - System Design mode for estimating loads and sizing systems, and Energy Analysis mode for hourly energy simulation. Key features covered include building load calculation methods, modeling approach using elements, spaces, zones, air systems and plants, and energy analysis reports. The document also discusses HAP's data management features and provides system requirements for installation.
Pedoman Standar Minimal Tahun 2015 ini memberikan ketentuan untuk menghitung Biaya Langsung Personil dan Biaya Langsung Non Personil dalam penyusunan Rencana Anggaran Biaya dan Harga Perkiraan Sendiri untuk jasa konsultansi. Biaya Langsung Personil terdiri atas Biaya Tenaga Ahli, Sub Profesional, dan Pendukung yang dihitung berdasarkan pengalaman dan berlaku di seluruh provinsi dengan indeks berbeda. Biaya Langsung Non Personil juga diatur untuk mend
PT. DENKI ENGINEERING provides general contractor and supplier services for commercial and industrial projects. Their vision is to be a competitive, reliable company that can perform synergies with others and become a global construction company. Their mission is to provide engineering services professionally for customer satisfaction and stakeholder prosperity. They have experience with various electrical, mechanical, and construction projects since 2009 for companies across industries.
This document provides information about APS Lanka (Pvt) Ltd, an electrical and mechanical services company in Sri Lanka. It outlines their vision, mission, quality and safety policies. It also includes details of their management team, project teams, recent and completed projects which involve electrical, extra low voltage, plumbing and drainage installations. Their vision is to become the top quality electrical engineering services provider in Sri Lanka and their mission is to deliver full turnkey solutions through excellence, technology and effective partnerships.
PT. RPM was established in 1989 and distributes hardware, machinery, and industrial equipment across Indonesia. It has eight sister companies and aims to be a leading supplier of high-quality products and services. The company strives for excellence through its commitment to on-time deliveries, expanding product offerings, and improving employee performance.
This document provides a summary of RatnaPertiwi's education and work experience. It outlines that she graduated from Bina Nusantara University in 2016 with a GPA of 3.33 in Management. It also lists several internships and roles she held with student organizations at her university, including roles in event planning, research assistance, and medical support. Contact information is provided at the end.
Dokumen tersebut merupakan bagian pendahuluan dari laporan penyusunan rencana tata ruang wilayah Kabupaten Muna Barat yang mencakup latar belakang CV. Tri Tehnik Konsultan sebagai konsultan pelaksana, lingkup layanan, pengalaman kerja, personalia, organisasi perusahaan.
Company Profile PT Goe Tech Indonesia Karawangbadar masbadar
Cara Membuat Company Profile Cara membuat corporate profile yang baik Cara Mendesain Profile Company Profesional Company Profile PT GOE-Tech INDONESIA Engineering Karawang Contoh Company Profile Kreatif Identity Branding Jasa Desain Print Cetak Company Profile KIIC Suryacipta Jababeka BSC Karawang Bekasi. Perusahaan Engineering Karawang Perusahaan General Trading Karawang Tips Kreatif Desain Bisnis Profile
Billing rate-konsultan -20091008141045__2178__0_2Ismed Nur
Surat edaran bersama ini memberikan petunjuk penyusunan Rencana Anggaran Biaya (RAB) untuk jasa konsultansi yang terdiri dari Biaya Langsung Personil dan Biaya Langsung Non Personil. Biaya Langsung Personil meliputi gaji, tunjangan, dan keuntungan, sedangkan Biaya Langsung Non Personil meliputi biaya perjalanan, akomodasi, dan pengeluaran lainnya. Surat ini menetapkan formula perhitungan dan ketentuan untuk kedua komp
Achievement consulting company profile 2012 r1Arie Mulyawan
Achievement Consulting is a business consulting firm focused on people development in Indonesia. Its vision is to develop human resources for the nation. The company offers various services including recruitment and assessment, people development programs like training, and consultancy. It has a team of experienced facilitators with expertise in areas like human resources, assessment, training, and motivation. The company aims to be the best and most trustworthy partner for clients' people development needs.
Dokumen tersebut berisi informasi tentang profil perusahaan konsultan CV. Madani Callysta Saibuyun yang memberikan jasa layanan di berbagai bidang seperti penelitian, telematika, pendidikan dan pelatihan, serta memiliki pengalaman kerja lebih dari 10 tahun terakhir bekerja sama dengan berbagai instansi pemerintah.
PT. Inovasi Akses Global (IAG) Consulting is an Indonesian consulting firm that provides services in events, corporate communications, content creation, and training. It was founded in 2012 as Jakarta Brainstorm focusing on procurement, and later expanded its services and changed its name to better serve clients' evolving needs. IAG Consulting aims to be a leading strategic partner for businesses through innovative solutions and a one-stop shop approach. It works with major Indonesian and international companies across industries.
01 hap4 4-space - Hourly Analysis Program - CarrierMonzer Salahdine
This document provides an overview of the capabilities of Carrier's HAP 4.4 HVAC design and energy analysis software. It describes the two main operating modes in HAP - System Design mode for estimating loads and sizing systems, and Energy Analysis mode for hourly energy simulation. Key features covered include building load calculation methods, modeling approach using elements, spaces, zones, air systems and plants, and energy analysis reports. The document also discusses HAP's data management features and provides system requirements for installation.
Pedoman Standar Minimal Tahun 2015 ini memberikan ketentuan untuk menghitung Biaya Langsung Personil dan Biaya Langsung Non Personil dalam penyusunan Rencana Anggaran Biaya dan Harga Perkiraan Sendiri untuk jasa konsultansi. Biaya Langsung Personil terdiri atas Biaya Tenaga Ahli, Sub Profesional, dan Pendukung yang dihitung berdasarkan pengalaman dan berlaku di seluruh provinsi dengan indeks berbeda. Biaya Langsung Non Personil juga diatur untuk mend
PT. DENKI ENGINEERING provides general contractor and supplier services for commercial and industrial projects. Their vision is to be a competitive, reliable company that can perform synergies with others and become a global construction company. Their mission is to provide engineering services professionally for customer satisfaction and stakeholder prosperity. They have experience with various electrical, mechanical, and construction projects since 2009 for companies across industries.
This document provides information about APS Lanka (Pvt) Ltd, an electrical and mechanical services company in Sri Lanka. It outlines their vision, mission, quality and safety policies. It also includes details of their management team, project teams, recent and completed projects which involve electrical, extra low voltage, plumbing and drainage installations. Their vision is to become the top quality electrical engineering services provider in Sri Lanka and their mission is to deliver full turnkey solutions through excellence, technology and effective partnerships.
PT. RPM was established in 1989 and distributes hardware, machinery, and industrial equipment across Indonesia. It has eight sister companies and aims to be a leading supplier of high-quality products and services. The company strives for excellence through its commitment to on-time deliveries, expanding product offerings, and improving employee performance.
This document is a curriculum vitae for Moch Zainal Abidin that includes his personal details, educational background, training and certificates, computer abilities, work experience, and projects. It shows that he has over 10 years of experience in structure design, electrical and instrument drafting, and vessel drafting for oil and gas projects in Indonesia and Malaysia. His most recent role was as a structure designer for SAIPEM working on projects in Angola and Namibia.
Bellibatubara has over 11 years of experience in mechanical engineering, quality control inspection, and project management. He has worked for several companies in roles such as operator, administrator, supervisor, and marketer. His background includes inspecting power plant construction, operating water turbines, managing warehouse administration, and supervising telecommunications infrastructure installation projects.
Sulhendra is an Indonesian electrical engineer seeking new opportunities. He has over 10 years of experience in quality control, production, and installation roles in various industries including oil and gas, electronics, and telecommunications. Sulhendra holds a Bachelor's degree in Electrical Engineering and various welding and quality management certifications. He is proficient in English, Indonesian, and Microsoft Office programs.
SINBERY CORPORATION SDN BHD (SCSB) is an electrical and instrumentation services company founded in 1990 in Malaysia. It provides services to oil and gas, petrochemical, and power generation facilities. SCSB has grown over 13 years through participation in many projects, developing an experienced team and fleet of equipment. It aims to provide comprehensive value-added products and services to meet client needs. The company profile provides details on SCSB's capabilities, projects, clients, safety records, and past experience.
MK Tech Engineering & Contractors provides construction services with skilled staff who have industry experience. They work closely with clients and other organizations to understand project needs. The company aims to deliver quality, cost-effective, and reliable products and services to customers and create value for stakeholders. They have experience in mechanical, electrical, and other sectors on various power, industrial, and chemical plant projects.
This document contains personal and employment details of Ng Aik Boon Danny. It summarizes his work experience including his current role as a Regional Sales Engineer at ABB T&B Business Unit since June 2015. It also outlines his previous roles as a Senior Sales Engineer at Phoenix Mecano S.E.A from 2012-2015 and as an Assistant and Sales Engineer at Ansac Technology from 2009-2012. The document lists his educational qualifications and skills.
Rahmat Hidayat is applying for a position and providing his resume. He has over 18 years of experience in piping, welding inspection, and project management in the oil and gas industry. He is seeking a new opportunity where he can apply his skills in safety, quality control, and completing projects on schedule.
PT. Berkah Hikari Alisha is an Indonesian mechanical engineering and manufacturing company established in 2020. The company aims to be a trusted problem solving partner for customers through high quality, on-time delivery and reasonable costs. PT. Berkah Hikari Alisha provides services including design and manufacturing of equipment, mechanical installation, and design assistance. The company's vision is to contribute to the development of industrial mechanical engineering through speedy, precise, and strong work.
Bhargav Thakkar has over 13 years of experience in mechanical and utility roles in the petrochemical, oil and gas, energy, and textile industries. He currently works as an AGM of Project and Technical Services at Inditech International, where he oversees projects involving machinery erection, commissioning, and maintenance. Some of the key projects he has worked on involve POY/FDY/PA6 machinery. He has expertise in planning, maintenance, troubleshooting, and commissioning of various process equipment and utilities including compressors, pumps, chillers, cooling towers, and more.
The document provides an overview of Engineering Projects (India) Ltd (EPIL) and summarizes an internship report on a construction project completed by EPIL. It describes EPIL's history, vision, services, and projects undertaken. It then summarizes a regional office building project for the Employers State Insurance Corporation, including project details, site layout, contractors involved, and current status in finishing stage.
Md. Al Amin has over 8 years of experience in electrical engineering and maintenance roles. He currently works as an Engineer for Electro Group in Dhaka, Bangladesh, where he is responsible for generator maintenance, project coordination, and reporting. Previously, he worked as an Assistant Engineer for Prime Textile Spinning Mills Ltd. where he managed electrical maintenance, troubleshooting, and repair work. Md. Al Amin holds a BSc in Electrical Engineering and diplomas in Electronics Engineering and other technical training.
Mani Engineers Pune is an engineering design and services company established in 2013 in Pune, India. It provides coordinated mechanical, electrical, plumbing, fire protection, and special systems services for building projects. The company has offices in Maharashtra and Uttar Pradesh and has completed projects for clients such as Ryan International School, Schindler India, and Perkins Ltd. It is currently working on projects including a BSF training center, a Raman Group hotel, and fire and gas systems for Sharp Engineers.
The document provides information about Austin Engineering Company Limited (AEC), including:
1. AEC is an Indian manufacturer of bearings established in 1973 that has expanded to produce over 4,500 bearing varieties for domestic and international markets.
2. The production process at AEC involves purchasing raw materials, testing materials, grinding and shaping components, assembly, inspection and packaging before storage and distribution.
3. AEC has grown over the years and now has ISO certifications, a subsidiary in the US, and supplies bearings to major domestic and international original equipment manufacturers.
Hendra Mai Mulkis has over 11 years of experience in instrument commissioning, calibration, and troubleshooting for various construction and production projects. He has worked on offshore platforms, FPSOs, refineries, and other process facilities. Some of the companies he has worked with include PT Angkasa Engineers Indonesia, PT Cegelec Supply, and CV Mini Indah. His experience spans projects in Indonesia, Ghana, and India.
Md. Mustafijur Rahman is an Electrical and Electronics Engineer seeking a position where he can utilize over 3 years of experience in planning, operating, and maintaining electrical systems. He holds a Bachelor's degree in Electrical and Electronics Engineering and has worked for several companies in maintenance engineering and project planning roles. His skills include AutoCAD, Revit, programming, and he is proficient in English.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
3. PT OODS ERA MANDIRI was establish on 13 January 2007
Started from small office surrounding Batam Centre with fully
organize by 4 persons skilled and expert on Mechanical,
piping, civil and electric instrument, General Trading, General
Contractor , Training & Consultan, Business Partner
The company is still growing, and will always continue to
grow, because for us, there's no end in improving the business
Enhance the quality of productivity, we also consider for
perfect schedule time as per our commitment for highly
regarded customer satisfaction.
PT OODS ERA MANDIRI was establish on 13 January 2007
Started from small office surrounding Batam Centre with fully
organize by 4 persons skilled and expert on Mechanical,
piping, civil and electric instrument, General Trading, General
Contractor , Training & Consultan, Business Partner
The company is still growing, and will always continue to
grow, because for us, there's no end in improving the business
Enhance the quality of productivity, we also consider for
perfect schedule time as per our commitment for highly
regarded customer satisfaction.
4. Vision
To be one of the leading companies in the civil, mechanical and electrical, General
Trading, Consultant & Bussiness Partner construction in Indoensia and by providing world
class equipments and through effective, efficient and excellent service.
Mission
1. Continuously improving the capability and quality of our highly innovative
productivity.
2. Providing the best service for our customers to achieve maximum satisfaction.
3. Highly committed in establishing excellent partnership with our business partners
Services & Support
Using our cutting edge technology working along with experienced qualified engineers, PT
OODS ERA MANDIRI offers our customers with a variety of technical services and
supports.
Vision
To be one of the leading companies in the civil, mechanical and electrical, General
Trading, Consultant & Bussiness Partner construction in Indoensia and by providing world
class equipments and through effective, efficient and excellent service.
Mission
1. Continuously improving the capability and quality of our highly innovative
productivity.
2. Providing the best service for our customers to achieve maximum satisfaction.
3. Highly committed in establishing excellent partnership with our business partners
Services & Support
Using our cutting edge technology working along with experienced qualified engineers, PT
OODS ERA MANDIRI offers our customers with a variety of technical services and
supports.
5. • Akta Notaris: No.01/ 01 October 2010
• izin Usaha (SIUP): No.0585/ Perindag-BTM/PMXI/2010(rev No.01031/Perindag-BTM/PK/V/2012
• Tanda Daftar Perusahaan (TDP): No. 041017409048(rev. No. 33.10.170.09048)
• Dephumham-RI: No. AHU-00800951.AHA.01.09. Tahun 2010
• Nomor Pokok Wajib Pajak (NPWP): No. 03.095.377.2-215.000
• Surat Keterangan Domisili (SKDU): No. 08/DOM/517/BK/X/2010 (rev. Nomor
100/DOM/517/BK/IV/2012)
• Keanggotaan AKEI –Association of Indonesia Electrical Contractors) No: 06.01.458.G2.2013
• Lembaga pengembangan Jasa Konstruksi- Construction service Development Board No.
000255-10/ASTTI/SKA/IV/2013
• LPJK-Sertifikat Badan Usaha Jasa Pelaksana Konstruksi
• No Registrasi: 2-2071-4-123-1-31-353076
• Izin Usaha Jasa Konstruksi Nasional PEMKO Batam No. 1.2171.2.00739.353076
• Akta Notaris: No.01/ 01 October 2010
• izin Usaha (SIUP): No.0585/ Perindag-BTM/PMXI/2010(rev No.01031/Perindag-BTM/PK/V/2012
• Tanda Daftar Perusahaan (TDP): No. 041017409048(rev. No. 33.10.170.09048)
• Dephumham-RI: No. AHU-00800951.AHA.01.09. Tahun 2010
• Nomor Pokok Wajib Pajak (NPWP): No. 03.095.377.2-215.000
• Surat Keterangan Domisili (SKDU): No. 08/DOM/517/BK/X/2010 (rev. Nomor
100/DOM/517/BK/IV/2012)
• Keanggotaan AKEI –Association of Indonesia Electrical Contractors) No: 06.01.458.G2.2013
• Lembaga pengembangan Jasa Konstruksi- Construction service Development Board No.
000255-10/ASTTI/SKA/IV/2013
• LPJK-Sertifikat Badan Usaha Jasa Pelaksana Konstruksi
• No Registrasi: 2-2071-4-123-1-31-353076
• Izin Usaha Jasa Konstruksi Nasional PEMKO Batam No. 1.2171.2.00739.353076
7. Corporate Manager: Mr Fandy
General Manager: Mr. Edo Permana,
Operational Manager: Mr. Bintang,ST
Regional Sales Manager: Mr. Franky Siregar
Accounting & Financial Manager: Mrs. Ernawati Wiwik
Business Plan Manager: Ilmansir
HRD Manager: Ruth Nasya
Corporate Manager: Mr Fandy
General Manager: Mr. Edo Permana,
Operational Manager: Mr. Bintang,ST
Regional Sales Manager: Mr. Franky Siregar
Accounting & Financial Manager: Mrs. Ernawati Wiwik
Business Plan Manager: Ilmansir
HRD Manager: Ruth Nasya
8. 1. ISO 9001;2008 : IRCA External Lead Auditor by TUV Rheinland, German
2. ISO 9001;2004 Internal Auditor by AJA, Singapore
3. ISO 14001;2004: Internal Auditor by AJA, Singapore
4. OHSAS 18001;2007: IRCA External Lead Auditor by Neville & Clarck, England
5. SMK3 Auditor by Menakertrans-RI
6. AK3U by Menakertrans-RI
7. K3 Elecrtical Specialist by Menakertrans-RI
8. K3 Chemical Specialist by Menakertrans-RI
For: Mr. Fandy Iood
As a Management Representative
Passport No: T 414880
1. ISO 9001;2008 : IRCA External Lead Auditor by TUV Rheinland, German
2. ISO 9001;2004 Internal Auditor by AJA, Singapore
3. ISO 14001;2004: Internal Auditor by AJA, Singapore
4. OHSAS 18001;2007: IRCA External Lead Auditor by Neville & Clarck, England
5. SMK3 Auditor by Menakertrans-RI
6. AK3U by Menakertrans-RI
7. K3 Elecrtical Specialist by Menakertrans-RI
8. K3 Chemical Specialist by Menakertrans-RI
For: Mr. Fandy Iood
As a Management Representative
Passport No: T 414880
12. Value Consumen/ Client
No. Company Name Description Location
1 Fu-Tai Engineering, Co Ltd Electrical & Instrument Taiwan
2 PT. Holcim Indonesia ME & Instrument Batam Batam- Indonesia
3. PT. Holcim Indonesia Electrical & Instrument Perawang
4. HyundaiHeavy Industries, Co Ltd General Contractor Korea Selatan
5. PT. Heat Exchanger Indonesia General Contractor Batam-Indonesia
6. PT. Bredero Shaw General Contractor Batam-Indonesia
7 NorthLab, Pte Ltd Electrical & Instruments Singapore
8 PT. Glopack, Indonesia M & E Project Batam-Indonesia
9 PT. Apipa Indonesia Electrical project Batam-Indonesia
10 PT. Jade Micron Batam Electrical Consultant Batam-Indonesia
11 PT. Yabisa Sukses Mandiri Civil & Electrical Project Batam-Indonesia
12 PT. Global Mandira Sakti M & EProject Jakarta- Indonesia
13 CPI Industry, Ltd Electrical Project Thailand
14 Cemtech,Co. Ltd Electrical & Mechanical Project Thailand
15 PT. Teknik Umum Engineering Consultant Jakarta- Indonesia
16 PT. Utomo Ladju General Contractor Jakarta- Indonesia
17 Proserv Batam E&I oil and Gas Batam-indonesia
18 PT. Dhiva Sarana Metal E&I oil and Gas Batam-Indonesia
19 FU-TAI Engineering, Co.,Ltd Electrical & Instrument Taiwan
20 PT. Cemindo Gemilang (Semen
Merah Putih)
Cement Grinding Plan E&I Cilegon-Indonesia
21 Others…..
Value Consumen/ Client
No. Company Name Description Location
1 Fu-Tai Engineering, Co Ltd Electrical & Instrument Taiwan
2 PT. Holcim Indonesia ME & Instrument Batam Batam- Indonesia
3. PT. Holcim Indonesia Electrical & Instrument Perawang
4. HyundaiHeavy Industries, Co Ltd General Contractor Korea Selatan
5. PT. Heat Exchanger Indonesia General Contractor Batam-Indonesia
6. PT. Bredero Shaw General Contractor Batam-Indonesia
7 NorthLab, Pte Ltd Electrical & Instruments Singapore
8 PT. Glopack, Indonesia M & E Project Batam-Indonesia
9 PT. Apipa Indonesia Electrical project Batam-Indonesia
10 PT. Jade Micron Batam Electrical Consultant Batam-Indonesia
11 PT. Yabisa Sukses Mandiri Civil & Electrical Project Batam-Indonesia
12 PT. Global Mandira Sakti M & EProject Jakarta- Indonesia
13 CPI Industry, Ltd Electrical Project Thailand
14 Cemtech,Co. Ltd Electrical & Mechanical Project Thailand
15 PT. Teknik Umum Engineering Consultant Jakarta- Indonesia
16 PT. Utomo Ladju General Contractor Jakarta- Indonesia
17 Proserv Batam E&I oil and Gas Batam-indonesia
18 PT. Dhiva Sarana Metal E&I oil and Gas Batam-Indonesia
19 FU-TAI Engineering, Co.,Ltd Electrical & Instrument Taiwan
20 PT. Cemindo Gemilang (Semen
Merah Putih)
Cement Grinding Plan E&I Cilegon-Indonesia
21 Others…..
13.
14. Workshop & Storage
Komp. Telaga Indah Blok M No.13, Batam, Kepri
Telp: 0778-7270222
Office:
Jalan Abulyatama, Ruko Manalagi Blok C No.10 Batam Kota, 29464, batam, Indonesia
Telp: +62778-475467, 7288919, Fax: +62778-475467
Batam: Mr. Fandy: Hp 082173332233 (Email: fandyiood@oodsgroup.com or
fandyiood@yahoo.com)
Website: www.oodsgroup.com
Contact Number & Email:
Branch Office (JABODATABEK AREA)
Komp. Darmawangsa, Blok Kedaton, Blok B No.18, BEKASI-Jawa barat, Indonesia
15. 1. Bank Name: Bank Internasional Indonesia (BII)
City: Batam-Indonesia
Account Name: PT. Oods Era Mandiri
Account Number: 2.513.006xxx
Curency: Rupiah (IDR)
Swif code: IBBK IDJA
2. Bank Name: Bank Internasional Indonesia (BII)
City: Batam-Indonesia
Account Name: PT. Oods Era Mandiri
Account Number: 2.034.524xxx
Curency: Singapore Dollar (SGD)
Swif code: IBBK IDJA
4. Bank Name: Bank Internasional Indonesia (BII)
City: Batam-Indonesia
Account Name: PT. Oods Era Mandiri
Account Number: 2.513.700xxx
Curency: America Dollar (USD)
Swif code: IBBK IDJA
3. Bank Name: Bank BTN Syariah
City: Batam-Indonesia
Account Name: PT. Oods Era Mandiri
Account Number: 7081001xxx
CurencyRupiah (IDR)
16. 1. PT. Crisand Brother
2. CV. Oods Enterprise
3. CV. Oods Bintang Engineering
4. Oods Jaya Abadi Technic
5. PT. Malelo Andalan Logistik
6. CV. Indonesia Service Academy
(INSA)
Oods Group:
(member of the OODS Group of companies)
Website: www.oodsgroup.com
1. PT. Crisand Brother
2. CV. Oods Enterprise
3. CV. Oods Bintang Engineering
4. Oods Jaya Abadi Technic
5. PT. Malelo Andalan Logistik
6. CV. Indonesia Service Academy
(INSA)
17. DESCRIPTION PHOTO
Cement Factory in Batam,
Mechanical, piping and electrical
installation
Installation Weight Bridge, started
from coulomb preparation,
erection, concrete filling until
setting weighing indicator.
1 2 2
3 4
18. DESCRIPTION PHOTO
AERATION SYSTEM for cement
loading
Fabrication – Setup – Testing
Installation AIR COMPRESSOR
System with piping complete
20. DESCRIPTION PHOTO
Installation Ventomatic Packer
machine, MC order from Italy and
handover to Client with fully
commissioning
Tank for Main air compressor
Fabrication-testing
21. DESCRIPTION PHOTO
Dusting system, fabrication –
erection and installation
PIPING SYSTEM, Fabrication-
erection and installation, from Jetty
to Main silo