This document is a curriculum vitae for Gabi G. Guta, who has over 30 years of experience as a chief mechanic working on offshore drilling rigs around the world. He has worked for several drilling companies and has experience maintaining and repairing a wide range of rig equipment, including drawworks, mud pumps, top drives, air compressors, and hydraulic systems. Guta is currently employed as the chief mechanic at KCA Deutag in Algeria, where he oversees maintenance and repairs on the rig.
Pohick Road - South Run Road Walkway Pedestrian ImprovementsFairfax County
The scope of this project included construction of concrete sidewalk, curb and gutter, curb-cut ramps, concrete bus pads, pavement mill and overlay, pavement marking and signings, drainage improvements, watermain relocation, guardrail system improvements, and pedestrian signals.
Pohick Road - South Run Road Walkway Pedestrian ImprovementsFairfax County
The scope of this project included construction of concrete sidewalk, curb and gutter, curb-cut ramps, concrete bus pads, pavement mill and overlay, pavement marking and signings, drainage improvements, watermain relocation, guardrail system improvements, and pedestrian signals.
The Relationship between Leadership Style and Organizational Commitment at De...feleke2014
The aim of this study was to examine the relationship between leadership styles and organizational commitment at Defense University. In order to achieve the purpose of the study, a cross sectional survey design was used. The sample of the study consisted of 153 employees from 5 different colleges of Defense University. Both leaders and their subordinates were participated in the study. Two standardized questionnaires i.e. Multifactor Leadership Questionnaire which was developed by Bass and Avolio (1995) and Organizational Commitment Questionnaire developed by Allen and Meyer (1990) were used to gather data. Data were analyzed using both descriptive and inferential statistics. Descriptive statistics such as frequency counts, percentages, mean and standard deviations were used while inferential statistics such as t-test and a two tailed Pearson correlation were used. The t-test analysis showed that leaders and subordinates have different perceptions on leadership styles at Defense University. The two-tailed correlation analysis further revealed that there is a positive and significant relationship between transformational leadership behaviors and organizational commitment (affective commitment, continuance commitment and normative commitment) but the relationship was not strong. Transactional leadership behavior had a weak but significant and positive relationship with affective, continuance and normative commitments. For laissez-faire leadership style, the correlation analysis results indicated that there was no statistically significant correlation between laissez-faire leadership behavior and organizational commitment. From the results, it was possible to conclude that both transformational and transactional leadership behaviors were positively related with affective, continuance and normative commitments whereas laissez-fair leadership behavior had no relationship with organizational commitment at Defense University. Finally, the study recommended that both transformational and transactional leadership behaviors can play a major role in developing and improving affective, continuance and normative commitments at Defense University.
Becoming Relentlessly Human-Centred in an AI World - Erin Patchell - SocialHR...SocialHRCamp
Speaker: Erin Patchell
Imagine a world where the needs, experiences, and well-being of people— employees and customers — are the focus of integrating technology into our businesses. As HR professionals, what tools exist to leverage AI and technology as a force for both people and profit? How do we influence a culture that takes a human-centred lens?
The Benefits of Temporary Part-Time Jobs for StudentsSnapJob
SnapJob is revolutionizing the way people connect with work opportunities and find talented professionals for their projects. Find temporary part-time jobs that fit your schedule and skills. Browse our listings and apply online today to secure flexible work opportunities that offer the perfect balance between career and personal life.
Watch this expert-led webinar to learn effective tactics that high-volume hiring teams can use right now to attract top talent into their pipeline faster.
Accelerating AI Integration with Collaborative Learning - Kinga Petrovai - So...SocialHRCamp
Speaker: Kinga Petrovai
You have the new AI tools, but how can you help your team use them to their full potential? As technology is changing daily, it’s hard to learn and keep up with the latest developments. Help your team amplify their learning with a new collaborative learning approach called the Learning Hive.
This session outlines the Learning Hive approach that sets up collaborations that foster great learning without the need for L&D to produce content. The Learning Hive enables effective knowledge sharing where employees learn from each other and apply this learning to their work, all while building stronger community bonds. This approach amplifies the impact of other learning resources and fosters a culture of continuous learning within the organization.
1. GABI G. GUTA
(CURRICULUM VITAE)
Civil status: married, 2 children Date ofbirth: 10
July 1962
Home address: BI. K1 A, ap. 21, et. 4, 10 Pantea Ion Street,
Moreni,
Dambovita, ROMANIA
POSITION:CHIEF MECHANIC
PASSPORT DETAILS: NO.(New Passport) 053493169
Data of issue 26.01.2016
Data of expiry 26.01.2021
Cell phone: +4.0723.235791,
E-mail address: gutagabi1962@yahoo.com
DUTIES AND RESPONSABILITES:
Need to perform all tasks in a safe an efficient manner with the required permit to
work.Completion of PMS,Make Job Requisitions,Oder Spares,Carry out planned
and unplanned maintenance on rig equipment.
-GENERATORS (CATS 3512 B),Oil Change,Valve Lash,Top End Overhauls etc
-Maintenance GENERATORS Emergency D 399,398,C-15
-Maintenance on Top Drive(TDS 11 VARCO)
- Top Drive:Model PS-2-750A,Top Drive HIDRALIFT
- Maintenance Drawworks Model D3000EBD Electric:Model C75ZB-L DC Motors
1,000 hp,Crown Block Saver,Model C85-RT2-E,Brake Cooling System,Drawworks
WIRTH type GH 4500 EG,Hydraulic System,Drilling Fluids
Equipment(Offshore),DRAWWORKS NATIONAL OIL VARCO
- Anual Maintenance Mud Pump:National Oilwell FB 1600 Triplex Mud Pump
Model 12-P-160,Type:F-800,F-1000,F-1300,H.P MUD PUMPS,Type:WIRTH
2. 2200,ABS+CDS
-Maintenance Annual & Semi Annual BOP Handlling System,Power Unit
Assembly,Drilco EZ Torque,Remote Control,H.P.U System,H.B.U System.VARCO
Power TONG(IRON ROUFNECK),Riser Catwalk,Pipe Catwalk(Hydraulic
System),Maintenance BOP (Cameron,Sheaffer 13 5/8``,Change Element
Rubber,Seales etc)
-Maintenance Air Compressor L-37,L-30,GARDNER DENVER.Ingersoll-Rand Air
Winches 5,000 LBS.Capacity,High Pressure Compressor,Ingersoll-Rand (2000
PSI)Man Riding Winches,AIR COMPRESSOR BLAUER,Maintenance Sullair Air
Compressor Unit
-Maintenance Mud Treatment System: Oteco Mud Guard, Model MG-5.5, National
Oil well Halcol,Mission Magnum,etc.
-Maintenance Rotary TableT-3750 Jolit GE Motor 752 and Kelly Spinner,Rotary
Table WIRTH,etc
- Maintaines propel levels of mechanical parts,spears and equipment
inventoriesEnsure all mechanical tools and equipments are kept in safe working
orderAsist the Electricians and Welder on specials projects when reqest to do soSCR
System Model 1400-5x5-3000-3512
-Maintenance on the Iron Roughneck(ST-80),Maintenance on CRANE
TEREX,Maintenance on Centrifugal Pumps(Change
Bearings,Impellers,Mecanichal Seals,Stuffing Box etc)
-Maintenance HPU Unit,Maintenance on Agitators
Diagnose and repair on all types of rig equipment,including disel engines,rig draw
works mud pumps,top drives system,air compressors and hidraulic systems etc.
Prepared and maintain up-to-date maintence records on all rig equipment
PMS procedures
Ensure activites are conducted in compliance with the company Permit to work
system
3. Responsible for own personal safety and the safety of co-workers
Typical Duties & Responsibilities Handled- At the start of every shift had to
report to the supervisor. Had to perform engine room watch keeping duties that
involves the task of checking oil levels in all moving equipment, checking fuel levels,
sounding fuel and water tanks, maintaining stock inventory on oil and reporting it
weekly to supervisor, bunkering fuel ,water, transferring fuel from one tank to another
generators, include change oil, fuel filters and oil filters also air filters.
EXPERINCE:
From 28-09-2010 I worked for KCA Deutag in ALGERIA,as Chief-Mechanic
From 07-01-2007 I work for SAIPEM Company (Offshore) as Chief-Mechanic on
Drillship SAIPEM 10000.Equipment we worked on drillship Saipem 10000
are:DRAWWORK WIRTH type GH 4500 EG,The disc brake,incorporating six (6)
pairs of calipers,gearbox configuration is tri-form,with A & B drives side by side
and the C drive mounted centrally.TDS-model HYDRALIFT,HYDRARACKER
model HYDRALIFT, IRON ROUGHNECK model HYDRALIFT,ST-80 model
VARCO,RISER SKATE CATWALK model HYDRALIFT,also PIPE
CATWALK,same model.H.P MUD PUMPS WIRTH-triplex piston pumps type TPK
7 ½ “x 14 “ / 2200.H.P Compressors BLAUER.We have a rich knowledge about
other equipment,I have worked with them.For example: NOV Drawwork,Top Drive
11 Varco, Mud Pumps NOV.etc.
From 13 March 2007 I work in Kuwait Drilling Company as Chief-Mechanic
25 September 2006-15 February 2007-I had work in Chad From Pride Forasol
Company as Chief-Mechanic
31 May 2005-13 May 2006- I was work for Shiv-Vani Company-drilling rig in Oman
as Chief-Mechanic
16 March 1997-15 April 2005: Chief-Mechanic on drilling and separation
equipments type IDECO 750,900 with HAMAD-AL-HAMAD in KUWAIT
19 December 1991-12 February 1997: drilling mechanics an F125, F200, drilling
equipment in LYBIA, with ROMPETROL Company
18 November 1983-6 December 1991: pump mechanic, motor mechanic, drilling
4. equipment motors mechanic for F100, F125, F320, F400 equipment, at S.A. FORAJ
MORENI (drilling Company)
*EDUCATION:
1969-1977 General School Bucsani
1977 -1981 Gregory Alexander’s Auto Industrial High School 12.08.1988-20.10.1988
Intensive English courses yearly exams for professional knowledge's
On 25 November 2008 I made the training MAINTENANCE HYDRAULIC
SYSTEMS (FESTO ACADEMY-ITALY)
2-6 July 2012 I made NOV Hydraulics Course and NOV TDS Mechanical AC
On the Operation, Maintenance & Troubleshooting (In ABEERDIN-SCOTIA)
On 04-02-2013 I made the BASIC OFFSHORE SAFETY INDUCTION &
EMERGENCY TRAINING INCLUDED HUET AND EBS (5700) SURVIVAL
COURSE and the HYDROGEN SULPHIDE, H2S, MAINTENANCE
HYDRAULIC SYSTEMS
OTHER CRAFT SKILL:
Knowdedge of other craft and operations such as Welding,pipefitting,crane
operations,plumbing,carpentry and etc
*ABILITIES:
-Communication in English and Arabian languages knowledge's -Driver's license,
category B, C
-Computer Knowledge: MS Office,SAP System etc