This document describes several Creo Parametric capabilities including augmented reality, multi-CAD collaboration, import data doctor, 2D detailing, 3D annotations, part and assembly modeling, weld design, freestyle design, surfacing, sheetmetal design, plastic part design, design reuse, assembly management, mechanism design, model animation, additive manufacturing, performance advisor, and eLearning libraries. Each capability is summarized in terms of who needs it, potential business value, process improvements, and key technologies.
Learn how EMA and Cadence are enabling the next generation of engineering data management workflows. This presentation will take you through a complete methodology covering design data management, component library management with automated footprint and symbol creation, and team based schematic design. These OrCAD engineering data management design technologies are geared to provide designers with purpose built tools to effectively manage your PCB data right from within your OrCAD design environment.
Handstar Inc. was started by 2 college students 4 years ago. The company focuses on apps for smartphones. Upon the success of their original expense tracking app, the company grew its service profile to investment portfolio performance app, calendar and an email app. After 4 years Handstar has 10 employees and an annual service revenue of 1.5 mil USD.
Learn how EMA and Cadence are enabling the next generation of engineering data management workflows. This presentation will take you through a complete methodology covering design data management, component library management with automated footprint and symbol creation, and team based schematic design. These OrCAD engineering data management design technologies are geared to provide designers with purpose built tools to effectively manage your PCB data right from within your OrCAD design environment.
Handstar Inc. was started by 2 college students 4 years ago. The company focuses on apps for smartphones. Upon the success of their original expense tracking app, the company grew its service profile to investment portfolio performance app, calendar and an email app. After 4 years Handstar has 10 employees and an annual service revenue of 1.5 mil USD.
Nhằm tri ân sự ủng hộ của học viên và quý khách hàng công ty, trung tâm công nghệ Advance Cad sẽ miễn phí 1000 lượt tải file giáo trình tự học phần xuất bản vẽ Autodesk Inventor 2015. Phần xuất bản vẽ rất quan trọng, đây là khâu giao tiếp từ bộ phận thiết kế tới sản xuất và vì vậy bạn cần phải trình bày tốt phần bản vẽ 2D để có thể làm việc hiệu quả nhất.
Load tại link: http://advancecad.edu.vn/advance-cad-tang-giao-trinh-xuat-ban-ve-autodesk-inventor-2015/
Đây là tài liệu cuối cùng trong phần lý thuyết về tạo hình cũng như tạo hình nổi trên phần mềm Jdpaint, Do phần mềm này có đặc thù liên quan đến mỹ thuật nên không phải ai cũng có thể nắm được một cách rõ ràng nhất, phần thiết kế này rất quan trọng để bạn có thể cho ra đời những hình nổi theo ý muốn chứ không đơn thuần là cắt ghép các hình nổi cho sẵn
Trong bối cảnh hiện tại, khi mà design and build đang phát triển, nhân lực cho mảng MEP Modeler còn đang rất mỏng, rất nhiều doanh nghiệp cần tuyển dụng nhưng không đủ ứng viên. Antdemy tạo ra:
Khóa học THIẾT KẾ HỆ THỐNG MEP – REVIT MEP
Khóa học mang lại những kiến thức và kinh nghiệm làm việc thực tế trong vị trí MEP Modeler. Các kỹ sư đã có kinh nghiệm có thể học thêm về revit để hỗ trợ cho công việc hiện tại của mình, với các sinh viên, tân kỹ sư có thể trực tiếp ứng tuyển vào vị trí Modeler sau khi hoàn thanh khóa học.
Khóa học này ứng dụng revit để tạo ra bản vẽ, model cho hệ thống MEP, đây không phải là một khóa học sử dụng phần mèm nên sẽ đi sâu vào 2 nội dung:
Kiến thức kỹ thuật: đối với các kỹ sư đã có nhiều kinh nghiệm trong ngành, tham gia khóa học với mục tiêu học những kỹ năng về revit thì phần kiến thức kỹ thuật này không có gì đáng nói. Tuy nhiên với các kỹ sư mới ra trường hoặc sinh viên thì cần hết sức chú ý những kiến thức này, có nó bạn sẽ tạo ra những bản vẽ đúng – nếu không bạn chỉ tạo ra những bản vẽ có tính thẩm mỹ mà không sử dụng được.
Kỹ năng làm việc: là những kỹ năng đi làm thực tế của một Revit modeler: từ việc tạo ra model 3d cho tới trình bày bản vẽ và in ấn… là nội dung được truyền tải trực tiếp trong những buổi học trực tiếp với giảng viên.
Bạn cần đọc cuốn tài liệu này trước khi tham gia các buổi học vì những bài giảng trên lớp là những nội dung chi tiết nằm ngoài cuốn sách này, những kiến thức trong tài liệu là những kiến thức nền để giúp bạn nắm được nội dung của các buổi học.
Các bạn tham gia một khóa học thực hành nên cần thiết phải thực hành nhiều để nâng cao kỹ năng của mình, những buổi thực hành trên lớp là không đủ.
Trong tài liệu có một số bài tập cơ bản để bạn nghiên cứu trước khi thực hành ở lớp. Mặc dù các bài tập này khá tổng quát và đã bao phủ được một phần các kỹ năng vẽ. Bạn sẽ được giao một bản vẽ hoàn chỉnh như thực tế để làm bài tập về nhà. Bạn cần bỏ thời gian tự thực hành ở nhà để khám phá ra những vướng mắc, giảng viên sẽ tận tình giải đáp cho các bạn những thắc mắc này, từ đó nâng cao kiến thức và khả năng vận dụng phần mềm trong công việc.
Học viên nên sử dụng phiên bản Revit 2016 có bản quyền education cho khóa học
Sách Dạy Phần Mềm Revit - Sách Revit Pro - Sách Học Revit ArchitectureKiến Trúc KISATO
Sách Dạy Phần Mềm Revit - Sách Revit Pro - Sách Học Revit Architecture
Cuốn sách hướng dẫn sử dụng phần mềm Revit Architecture do Ths. Nhà đào tạo Lương Trainer hướng dẫn sử dụng
Ngoài cuốn sách Revit Pro này ra bạn có thể tham khảo thêm khóa học revit miễn phí qua video tại link: http://revitbox.net/
AutoCAD® is a computer-aided design (CAD) software from Autodesk that provides architects, engineers, and construction professionals the ability to create precise 2D and 3D drawings. Features. Draft, annotate, and design 2D geometry and 3D models with solids, surfaces, and mesh objects
Giáo trình Creo 4.0 này nhằm giúp cập nhật những kiến thức về cách sử dụng phiên bản Creo mới cho công việc thiết kế cơ khí, và để tiết kiệm thời gian, phần này chỉ hướng dẫn về 3D mà không hướng dẫn lại phác thảo 2D, phác thảo 2D khá dễ, chỉ cần biết Autocad là có thể tự học nhanh, hoặc có thể đọc qua những giáo trình Creo 2.0 cơ bản mà Advance CAD đã chia sẻ.
Tài liệu này được dịch lại từ nội dung sách Creo Parametric 4.0 Black Book của các tác giả Gaurav Verma và Matt Weber. Do đó kiến thức sẽ hệ thống hơn, cách trình bày sư phạm dễ hiểu, đặc biệt là tài liệu được dịch nên chúng tôi chia sẻ nó miễn phí cho những ai có nhu cầu tự học thiết kế 3D trên Creo 4.0.
Chúng tôi sẽ cố gắng hoàn thiện thêm các giáo trình nâng cao của Creo để giúp người học có thể tự nâng cao kiến thức hoặc áp dụng được tối đa lợi ích của phần mềm cho công việc như thiết kế mặt, thiết kế kim loại tấm, các kiến thức về gia công phay, gia công tiện trên phần mềm Creo 4.0
Tài liệu được chia sẻ công khai và không dùng với mục đích thương mại. Và được tài trợ bởi Người dịch ( Nguyễn Phước Hải). Trung tâm Advance CAD giữ mọi bản quyền về tài liệu, mọi đóng góp ý kiến, kinh nghiệm xin gởi về tivicad@gmail.com
HCM Tháng 08 năm 2017
Nội dung
Phần 1: 3D cơ bản 3
1. Giới thiệu 4
2. Các mặt trong 3D 6
3. Đối tượng chuẩn 6
4. Tạo phác thảo trên mặt phẳng 22
5. Tạo các đối tượng 3D 25
6. Đùn 25
7. IMPORT SKETCHES 31
8. REVOLVE 32
9. SWEEP 35
10. HELICAL SWEEP 38
11. BLEND 44
12. ROTATIONAL BLEND 51
13. SWEPT BLEND 54
Phần 2: Thực hành thiết kế mô hình 3D 58
Bài tập 1 65
Bài tập 2 74
Bài tập 3 80
Bài tập 4 83
Bài tập 5 91
Bài tập 6 98
Phần bài tập tự luyện 106
Watch video of this presentation on YouTube: https://youtu.be/Q5OhVv-x4eo
PMBOK 6th edition updated slides by process:
https://www.slideshare.net/anandbobade/pmp-chap-50-scope-management-overview
https://www.slideshare.net/anandbobade/chap-51-plan-scope-management
https://www.slideshare.net/anandbobade/chap-52-collect-requirements
https://www.slideshare.net/anandbobade/chap-53-define-scope
https://www.slideshare.net/anandbobade/chap-54-create-wbs
https://www.slideshare.net/anandbobade/chap-55-validate-scope
https://www.slideshare.net/anandbobade/chap-56-control-scope
Représentation graphique des niveaux de maturité BIM selon 3 aspects : 1) modélisation de l'information, 2) modalités de collaboration et 3) technologie.
Richard Petrie, Chief Executive of buildingSMART International presents the organisation and its chapters, open standards, bSDD and the developing of common sloutions for the construction sector.
Chương 1: Mô hình hóa 3D cơ bản
· Tạo khối chữ nhật, trụ tròn, hình chêm, côn, đa diện, hình cầu và vành khuyên
· Tạo hệ tọa độ người dùng- User Coordinate System
· Làm việc với hệ tọa độ động- Dynamic UC
· Thay đổi kiểu xem của đối tượng
· Tạo Viewports cho mô hình
· Tạo thành sử dụng công cụ Polysolid
· Thay đổi hướng nhìn
· Tạo khối đùn, khối xoay, quét, loft và đối tượng dạng nặn tượng
· Quá trình kết hợp đối tượng Boolean
· Canh chỉnh, định vị đối tượng
· Tạo các đường cong xoắn và xoắn ốc
Chương 2 : Chỉnh sửa khối Solid và tạo ra bản vẽ 2D
Trong chương này sẽ giới thiệu đến các nội dung bao gồm:
· Di chuyển đối tượng
· Tạo xếp dãy 3D
· Đối xứng đối tượng trong không gian 3D
· Bo tròn cạnh
· Tạo mặt nghiêng trên khối 3D
· Offset mặt
· Xoay đối tượng
· Tạo đường 3D Polylines
· Tạo vỏ
· Vát cạnh
· Tạo tiết diện trực tiếp
· Xuất bản vẽ 2D từ mô hình 3D
· Tạo hình cắt và bản vẽ chi tiết
Dive into the world of advanced CAD modeling with PTC Creo Parametric, the pinnacle of 3D design software. Explore its extensive capabilities, from powerful extensions to precise 2D and 3D modeling tools. Discover how Creo Parametric revolutionizes the engineering and design process, enabling unparalleled creativity and efficiency. Learn more about its features and benefits at 3hti.
Nhằm tri ân sự ủng hộ của học viên và quý khách hàng công ty, trung tâm công nghệ Advance Cad sẽ miễn phí 1000 lượt tải file giáo trình tự học phần xuất bản vẽ Autodesk Inventor 2015. Phần xuất bản vẽ rất quan trọng, đây là khâu giao tiếp từ bộ phận thiết kế tới sản xuất và vì vậy bạn cần phải trình bày tốt phần bản vẽ 2D để có thể làm việc hiệu quả nhất.
Load tại link: http://advancecad.edu.vn/advance-cad-tang-giao-trinh-xuat-ban-ve-autodesk-inventor-2015/
Đây là tài liệu cuối cùng trong phần lý thuyết về tạo hình cũng như tạo hình nổi trên phần mềm Jdpaint, Do phần mềm này có đặc thù liên quan đến mỹ thuật nên không phải ai cũng có thể nắm được một cách rõ ràng nhất, phần thiết kế này rất quan trọng để bạn có thể cho ra đời những hình nổi theo ý muốn chứ không đơn thuần là cắt ghép các hình nổi cho sẵn
Trong bối cảnh hiện tại, khi mà design and build đang phát triển, nhân lực cho mảng MEP Modeler còn đang rất mỏng, rất nhiều doanh nghiệp cần tuyển dụng nhưng không đủ ứng viên. Antdemy tạo ra:
Khóa học THIẾT KẾ HỆ THỐNG MEP – REVIT MEP
Khóa học mang lại những kiến thức và kinh nghiệm làm việc thực tế trong vị trí MEP Modeler. Các kỹ sư đã có kinh nghiệm có thể học thêm về revit để hỗ trợ cho công việc hiện tại của mình, với các sinh viên, tân kỹ sư có thể trực tiếp ứng tuyển vào vị trí Modeler sau khi hoàn thanh khóa học.
Khóa học này ứng dụng revit để tạo ra bản vẽ, model cho hệ thống MEP, đây không phải là một khóa học sử dụng phần mèm nên sẽ đi sâu vào 2 nội dung:
Kiến thức kỹ thuật: đối với các kỹ sư đã có nhiều kinh nghiệm trong ngành, tham gia khóa học với mục tiêu học những kỹ năng về revit thì phần kiến thức kỹ thuật này không có gì đáng nói. Tuy nhiên với các kỹ sư mới ra trường hoặc sinh viên thì cần hết sức chú ý những kiến thức này, có nó bạn sẽ tạo ra những bản vẽ đúng – nếu không bạn chỉ tạo ra những bản vẽ có tính thẩm mỹ mà không sử dụng được.
Kỹ năng làm việc: là những kỹ năng đi làm thực tế của một Revit modeler: từ việc tạo ra model 3d cho tới trình bày bản vẽ và in ấn… là nội dung được truyền tải trực tiếp trong những buổi học trực tiếp với giảng viên.
Bạn cần đọc cuốn tài liệu này trước khi tham gia các buổi học vì những bài giảng trên lớp là những nội dung chi tiết nằm ngoài cuốn sách này, những kiến thức trong tài liệu là những kiến thức nền để giúp bạn nắm được nội dung của các buổi học.
Các bạn tham gia một khóa học thực hành nên cần thiết phải thực hành nhiều để nâng cao kỹ năng của mình, những buổi thực hành trên lớp là không đủ.
Trong tài liệu có một số bài tập cơ bản để bạn nghiên cứu trước khi thực hành ở lớp. Mặc dù các bài tập này khá tổng quát và đã bao phủ được một phần các kỹ năng vẽ. Bạn sẽ được giao một bản vẽ hoàn chỉnh như thực tế để làm bài tập về nhà. Bạn cần bỏ thời gian tự thực hành ở nhà để khám phá ra những vướng mắc, giảng viên sẽ tận tình giải đáp cho các bạn những thắc mắc này, từ đó nâng cao kiến thức và khả năng vận dụng phần mềm trong công việc.
Học viên nên sử dụng phiên bản Revit 2016 có bản quyền education cho khóa học
Sách Dạy Phần Mềm Revit - Sách Revit Pro - Sách Học Revit ArchitectureKiến Trúc KISATO
Sách Dạy Phần Mềm Revit - Sách Revit Pro - Sách Học Revit Architecture
Cuốn sách hướng dẫn sử dụng phần mềm Revit Architecture do Ths. Nhà đào tạo Lương Trainer hướng dẫn sử dụng
Ngoài cuốn sách Revit Pro này ra bạn có thể tham khảo thêm khóa học revit miễn phí qua video tại link: http://revitbox.net/
AutoCAD® is a computer-aided design (CAD) software from Autodesk that provides architects, engineers, and construction professionals the ability to create precise 2D and 3D drawings. Features. Draft, annotate, and design 2D geometry and 3D models with solids, surfaces, and mesh objects
Giáo trình Creo 4.0 này nhằm giúp cập nhật những kiến thức về cách sử dụng phiên bản Creo mới cho công việc thiết kế cơ khí, và để tiết kiệm thời gian, phần này chỉ hướng dẫn về 3D mà không hướng dẫn lại phác thảo 2D, phác thảo 2D khá dễ, chỉ cần biết Autocad là có thể tự học nhanh, hoặc có thể đọc qua những giáo trình Creo 2.0 cơ bản mà Advance CAD đã chia sẻ.
Tài liệu này được dịch lại từ nội dung sách Creo Parametric 4.0 Black Book của các tác giả Gaurav Verma và Matt Weber. Do đó kiến thức sẽ hệ thống hơn, cách trình bày sư phạm dễ hiểu, đặc biệt là tài liệu được dịch nên chúng tôi chia sẻ nó miễn phí cho những ai có nhu cầu tự học thiết kế 3D trên Creo 4.0.
Chúng tôi sẽ cố gắng hoàn thiện thêm các giáo trình nâng cao của Creo để giúp người học có thể tự nâng cao kiến thức hoặc áp dụng được tối đa lợi ích của phần mềm cho công việc như thiết kế mặt, thiết kế kim loại tấm, các kiến thức về gia công phay, gia công tiện trên phần mềm Creo 4.0
Tài liệu được chia sẻ công khai và không dùng với mục đích thương mại. Và được tài trợ bởi Người dịch ( Nguyễn Phước Hải). Trung tâm Advance CAD giữ mọi bản quyền về tài liệu, mọi đóng góp ý kiến, kinh nghiệm xin gởi về tivicad@gmail.com
HCM Tháng 08 năm 2017
Nội dung
Phần 1: 3D cơ bản 3
1. Giới thiệu 4
2. Các mặt trong 3D 6
3. Đối tượng chuẩn 6
4. Tạo phác thảo trên mặt phẳng 22
5. Tạo các đối tượng 3D 25
6. Đùn 25
7. IMPORT SKETCHES 31
8. REVOLVE 32
9. SWEEP 35
10. HELICAL SWEEP 38
11. BLEND 44
12. ROTATIONAL BLEND 51
13. SWEPT BLEND 54
Phần 2: Thực hành thiết kế mô hình 3D 58
Bài tập 1 65
Bài tập 2 74
Bài tập 3 80
Bài tập 4 83
Bài tập 5 91
Bài tập 6 98
Phần bài tập tự luyện 106
Watch video of this presentation on YouTube: https://youtu.be/Q5OhVv-x4eo
PMBOK 6th edition updated slides by process:
https://www.slideshare.net/anandbobade/pmp-chap-50-scope-management-overview
https://www.slideshare.net/anandbobade/chap-51-plan-scope-management
https://www.slideshare.net/anandbobade/chap-52-collect-requirements
https://www.slideshare.net/anandbobade/chap-53-define-scope
https://www.slideshare.net/anandbobade/chap-54-create-wbs
https://www.slideshare.net/anandbobade/chap-55-validate-scope
https://www.slideshare.net/anandbobade/chap-56-control-scope
Représentation graphique des niveaux de maturité BIM selon 3 aspects : 1) modélisation de l'information, 2) modalités de collaboration et 3) technologie.
Richard Petrie, Chief Executive of buildingSMART International presents the organisation and its chapters, open standards, bSDD and the developing of common sloutions for the construction sector.
Chương 1: Mô hình hóa 3D cơ bản
· Tạo khối chữ nhật, trụ tròn, hình chêm, côn, đa diện, hình cầu và vành khuyên
· Tạo hệ tọa độ người dùng- User Coordinate System
· Làm việc với hệ tọa độ động- Dynamic UC
· Thay đổi kiểu xem của đối tượng
· Tạo Viewports cho mô hình
· Tạo thành sử dụng công cụ Polysolid
· Thay đổi hướng nhìn
· Tạo khối đùn, khối xoay, quét, loft và đối tượng dạng nặn tượng
· Quá trình kết hợp đối tượng Boolean
· Canh chỉnh, định vị đối tượng
· Tạo các đường cong xoắn và xoắn ốc
Chương 2 : Chỉnh sửa khối Solid và tạo ra bản vẽ 2D
Trong chương này sẽ giới thiệu đến các nội dung bao gồm:
· Di chuyển đối tượng
· Tạo xếp dãy 3D
· Đối xứng đối tượng trong không gian 3D
· Bo tròn cạnh
· Tạo mặt nghiêng trên khối 3D
· Offset mặt
· Xoay đối tượng
· Tạo đường 3D Polylines
· Tạo vỏ
· Vát cạnh
· Tạo tiết diện trực tiếp
· Xuất bản vẽ 2D từ mô hình 3D
· Tạo hình cắt và bản vẽ chi tiết
Dive into the world of advanced CAD modeling with PTC Creo Parametric, the pinnacle of 3D design software. Explore its extensive capabilities, from powerful extensions to precise 2D and 3D modeling tools. Discover how Creo Parametric revolutionizes the engineering and design process, enabling unparalleled creativity and efficiency. Learn more about its features and benefits at 3hti.
CAD program is being used on extensive foundation by a number of technological innovation experts and organizations for various programs.
The most common program of these programs is developing and creating. Here are some of the advantages of applying techniques in the companies
While shifting from manual processes to computer-driven arrangements, especially for producing technical drawings, it's hard to downplay the relevance of Computer-aided Design (CAD), Autodesk AutoCAD training, high-paying AutoCAD careers, and job roles.
The Highest-Paying AutoCAD Careers & Job RolesStaciBassett
Skills for managing smarter technologies and software-oriented methodologies. That's what all modern-day competitive organizations and aspiring professionals look for.
Sree Varahhas Technologies, is established with a vision to provide end-to-end Design Engineering Services; enabling customers achieve operational efficiency, flexibility and agility by utilizing our engineering talent
Engineering excellence @ Sree Varahhas is driven by subject matter experts who have long standing experience in Design, R&D, manufacturing and an overall understanding of realizing customer expectations with the help of well-established processes and proven project management methodologies
Engineering processes @ Sree Varahhas align to the Product development Processes of customers in order to fulfill the priorities for speed-to-market and competitive products with consistent quality
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
2. 55
CREO PARAMETRIC − AUGMENTED REALITY (AR)
Rapidly define, publish and distribute AR experiences from Creo
Who Needs It?
Every customer that needs to communicate, collaborate and share CAD data with engineers, suppliers, partners and non-CAD
users
• CAD-based viewing limits productivity and usability
Business Value
• Enhance the customer experience using AR to visualize products in the real
world
− Improve communication and understanding using scale and real-world
environment
• Accelerate sales, marketing and customer loyalty with an AR experience
• Enable virtual design collaboration using AR to facilitate
effective design reviews
− Solicit and apply expertise and knowledge using AR to connect disparate
teams
• Enable non-CAD users to interact, explore and engage using AR
− Easily distribute and enable non-CAD users to interact with CAD geometry
• Protect IP by preventing access to CAD data
Process
Improvement
• Design communication, collaboration and review
Technology/
Capability
• AR Setup, Publishing, Distribution and Viewing via Vuforia View
3. 6
CREO PARAMETRIC − UNITE TECHNOLOGY
Capabilities to support multi-CAD Collaboration and Consolidation
Who Needs It?
Every customer that needs to integrate and work with design data from OEMs and outsourced design partners (components,
subsystems, etc.)
• The typical company uses an average of 2.7 CAD systems
Business Value
• Reduce product cost
• Reduce time-to-market
• Reduce product development cost
• Improve product quality and innovation
Process
Improvement
• Multi-CAD Design Collaboration
• CAD Consolidation
Technology/
Capability
• Easily integrate and work with data from any CAD source
• Directly import CATIA V4/V5, SolidWorks, Solid Edge and
Inventor formats
• Directly open CATIA V4/V5, SolidWorks and Siemens NX
data
4. 7
CREO PARAMETRIC − IMPORT DATA DOCTOR (IDD)
Automate the “repair” and “clean-up” of imported geometry
Who Needs It?
Customers that work with imported data and require the ability to repair translated geometry that has missing information,
geometry gaps and errors
• Data does not always translate 100%
Business Value
• Reduce product costs
• Reduce time-to-market
• Reduce product development cost
Process
Improvement
• Repair and modification of imported data
Technology/
Capability
• Tools to Repair, Modify and Featurize imported
geometry
• Repair tools – used to make geometry solid or
improve the quality of imported surfaces and edges
• Modification tools – used to move, replace, and
manipulate imported geometry
• Featurization tools – used to convert non-analytic
geometry to analytic geometry and create curves and
surfaces within the imported data
5. 8
CREO PARAMETRIC – 2D DETAILING AND DOCUMENTATION
Specialize capabilities to manage component display and system performance
Who Needs It? Every customers that needs to document product specifications and manufacturing details
Business Value
• Reduce product cost
• Reduce time-to-market
• Reduce product development cost
Process
Improvement
• 2D drawing and documentation
Technology/
Capability
• Automated creation of drawings using standard
templates
• Fast drawing “cleanup” of dimensions, notes and
annotations
• Automatic creation of associative BOMs
• Automatic creation of views and balloon callouts
• Easily creation of dimensions, geometric
tolerances, annotations, etc.
• Support for all industry standards (ANSE, ISO,
ASME and JIS)
6. 99
CREO PARAMETRIC – 3D MODEL ANNOTATIONS (aka MBD)
Define a single source of truth for design, manufacturing and process information
Who Needs It?
Customers that want to improve the documentation and sharing of digital
product information for design review and manufacturing
• The goal is to reduce reliance on 2D detailed drawings and eliminate lost
time documenting non-critical information
• Unlike 2D data, 3D information is easily visualized and interrogated
Business Value
• Reduce time-to-market
• Reduce product development
cost
• Improve product quality and
innovation
• Improve collaboration and
communication
Process
Improvement
• Model-based documentation and GD&T
• Streamline communication using a drawing-free process
Technology/
Capability
• Streamline product documentation via drawing-free process
• Eliminate human error and miss-interpretation of 2D information
• Define a single source of product development and manufacturing
information
7. 10
Powerful, parametric design capabilities to create complex geometry and capture
design intent
CREO PARAMETRIC – PART AND ASSEMBLY MODELING
Who Needs It?
Customers that require the power and flexibility to model any geometry
regardless of shape, size or complexity
Business Value
• Reduce product costs
• Reduce time-to-market
• Reduce product development cost
• Develop and define new markets
Process
Improvement
• 3D part modeling
• 3D assembly modeling
Technology/
Capability
• Create precise geometry, regardless of model complexity without compromise
• Capture engineering requirements using feature parameters, constraints and
relations
• Easily create and manage complex assemblies using tools to manage and
improve system performance
• Perform global clearance and interference studies using static components
and real-time collision detection (component drag)
• Seamless integration with PTC Solutions to facilitate concurrent engineering
8. 11
CREO PARAMETRIC – WELD DESIGN
Accurately define weld geometry and the associated weld fabrication documentation
Who Needs It?
Customers that need to define and capture the weld fabrication process
and manufacturing requirements
Business Value
• Reduce product costs
• Design to realize price premium
• Reduce product development cost
Process
Improvement
• 3D Weld definition (modeling)
• 2D Weld documentation (detailing)
Technology/
Capability
• 3D welds are required to support downstream activities
− Reference weld geometry to create accurate structural
analyses
− Perform accurate mass properties and interference checking
− Accurately assess costs and time estimates (manufacturing)
− Accurately create weld symbols and weld fabrication
documentation
9. 12
CREO PARAMETRIC – FREESTYLE DESIGN
Capabilities to speed the creation high-quality freeform surface geometry
Who Needs It?
Any customer that creates freeform surface geometry to satisfy aesthetic,
ergonomic and functional design requirements
Business Value
• Reduce time-to-market
• Reduce product development cost
• Improve product styling and competitive
differentiation
Process
Improvement
• Conceptual design
• Freeform and stylized surface creation
Technology/
Capability
• Fast creation of high-quality surface geometry
− Directly manipulate primitive shapes to
create surface geometry
• Enable novice users to create high-quality stylized surface
geometry
− No need to define curves and surfaces
− No need to understand curve and patch structure
• Ability to align Freestyle geometry to external entities
10. 13
CREO PARAMETRIC – SURFACING
Define parameter and constraint driven entities to create complex free-form and
analytical surfaces
Who Needs It?
Customers that want to define free-form and analytical surfaces using parameters, constraints and
calculations to define variable geometry and capture design intent
Business Value
• Reduce time-to-market
• Reduce product development cost
• Increase styling and design to realize price
premium
Process
Improvement
• 3D part design and surface modeling
− Complex part design frequently requires surfacing
to handle complex geometry and design
scenarios
Technology/
Capability
• Easily model and edit complex surface geometry
• Develop complex surface geometry using sweeps, blends, and boundary
surfaces
• Create analytic surfaces using extrude, revolve and fill tools
• Drive complex surface geometry using mathematical equations and
functions
• Edit surfaces using trim, copy, merge and surface transform
11. 14
CREO PARAMETRIC – SHEETMETAL PART DESIGN
Fast creation of accurate sheetmetal designs and flat pattern geometry
Who Needs It? Customers that need to design accurate sheetmetal parts and flat pattern geometry
Business Value
• Reduce product costs
• Reduce time-to-market
• Reduce product development cost
Process
Improvement
• 3D sheetmetal part design
• Flat pattern geometry creation
Technology/
Capability
• Fast creation of complex sheet metal parts
• Pick and place creation of walls, hems, notches, bend relief,
etc.
• Direct editing of sheet metal walls and features
• Fast creation and placement of sheet metal form features
(louvers, bosses, ribs, etc.)
• Automated creation of sheet metal flat patterns with
accurate bend allowance calculations
12. 15
CREO PARAMETRIC – PLASTIC PART DESIGN
Specialized features to speed the creation and analysis of plastic and “thin walled”
parts
Who Needs It?
Customers that design plastic parts and “thin
walled” geometry
Business Value
• Reduce product costs
• Reduce time-to-market
• Reduce product development cost
Process
Improvement • 3D plastic part design
Technology/
Capability
• True 3D thickness checking
• Fast analysis and verification of draft
geometry
• Specialized features to speed the creation
of thin walled parts
• Integral capabilities to analyze molding
conditions and optimize geometry
13. 16
CREO PARAMETRIC – DESIGN REUSE AND AUTOMATION
Automatically create part variants using design rules and family tables
functionality
Who Needs It?
Any customers that creates standardized components
and part geometry
Business Value
• Reduce product cost
• Reduce time-to-market
• Reduce product development cost
Process
Improvement
• Part standardization and reuse
Technology/
Capability
• Automatic creation/verification of “table-
driven” part variants
− Specify variable dimensions, features,
geometry
14. 17
CREO PARAMETRIC – ASSEMBLY MANAGEMENT AND PERFORMANCE
TOOLS
Specialize capabilities to manage component display and system performance
Who Needs It?
Customers that want to manage the assembly design process
and system performance
Business Value
• Reduce product cost
• Reduce time-to-market
• Reduce product development cost
Process
Improvement
• 3D assembly modeling
Technology/
Capability
• Work efficiently using on-demand simplified Reps
• Define envelope parts to reduce memory usage
• Work efficiently using “zones” to control clipping and
component display
• Create associative and non-associative “shrinkwraps”
• Define lightweight components
15. 18
CREO PARAMETRIC – MECHANISM DESIGN (KINEMATIC)
Model assemblies using true mechanism constraints to support and enable kinematic
motion analysis
Who Needs It?
Customers that need to visualize and understand mechanism
behavior using real world constraints to validate mechanism
design and range of motion
Business Value
• Reduce product costs
• Reduce time-to-market
• Reduce product lifecycle cost
• Reduce product development cost
Process
Improvement
• Mechanism design
• Kinematic motion analysis
Technology/
Capability
• Define assemblies using true mechanical joints
• Design and troubleshoot complex assembly mechanisms
• Perform kinematic analysis to validate and optimize mechanism behavior
• Create motion envelopes to define “keep out zones” occupied by moving
parts and components
• Drag components to easily visualize and validate assembly mechanism
design and range of motion
16. 19
CREO PARAMETRIC – MODEL ANIMATION
Easily create assembly animations to demonstrate real-world behavior and
assembly/disassembly instructions
Who Needs It?
Customers that create documentation and collateral to
demonstrate functional and procedural product specifications
and details
Business Value
• Reduce product costs
• Lower product lifecycle cost
• Reduce product development cost
• Develop and define new markets
Process
Improvement
• Design and functional product review
• Work instructions and /Shop floor procedural
documentation
Technology/
Capability
• Easily define display states, orientations, and motion behavior using a graphical
timeline to create and manage the animation
• Define assembly and disassembly animations for shop floor service and repair
• Reduce or eliminate the need to create lengthy documentation
17. 20
CREO PARAMETRIC – DESIGN FOR ADDITIVE MANUFACTURING
Reduce lengthy product development and manufacturing lead times
Who Needs It?
Any customer that needs to rapidly create prototypes, short run production tooling and
end-use components for evaluation and production use
• Additive manufacturing allows engineers to directly manufacture fully functional
prototypes and end-use sellable goods
• Additive manufacturing eliminates manufacturing process limitations (freedom to
innovate)
Business Value
• Reduce time-to-market
• Reduce product development cost
• Accelerate new product introduction
• Improve product quality and innovation
Process
Improvement
• Rapid prototyping, tooling design and part
manufacturing
Technology/
Capability
• Easy 3D printer selection and configuration
• Simplified 3D model prep
• Printability verification
Note: Extended function with Creo AMX
18. 21
Creo Parametric includes basic Additive Manufacturing capabilities
• OOTB 3D Printer Support
– Support for Stratasys and 3D Systems
• Model Preparation (Tessellation)
– Chord height and angle controls
• Printer tray setup
– Auto position parts in Printer Tray
• Global Scale
– Scale all models
• Printability Validation
– Check models for Thin Walls and Narrow Gaps
• Model Interrogation
– Clipping
– Display Support Material (approximation)
• Calculate Build material
– Rapid cost estimating
• Option to Order 3D Print
– Direct connection to i.materialize online print service
CREO PARAMETRIC ADDITIVE MANUFACTURING OVERVIEW
19. 22
CREO PARAMETRIC – PERFORMANCE ADVISOR
Unprecedented visibility into your Creo-related hardware and software
environment
Who Needs It?
Every Creo customer that wants to optimize
hardware and software performance and
monitor install base usage
Business Value
• Reduce IT support and administration cost
• Maximize and improve software utilization
• Reduce cost of system downtime
• Speed issue investigation
Process
Improvement
• CAD administration and IT support
Technology/
Capability
• Hardware and software performance monitoring
− Proactive investigation and resolution of stability and
compatibility issues
• Feature and usage monitoring
− Identify training requirement
20. 23
Learning Connector delivers on-demand access to training content and materials
• Integrated eLearning promotes rapidly learning and enhanced user skills
ELEARNING LIBRARIES INCLUDED WITH SUBSCRIPTION PURCHASE
Context sensitive learning provides
training as it is needed, when it is
needed,..
With no disruptions
“Hey Bob, how do I create a variable
section sweep?“
• Easy access to training, tutorials, help
center and knowledge base
• Rapidly adoption and utilization of new
and advanced functionality
• Elevate users skills and increase
productivity
21. 2424
CREO PARAMETRIC – “LITE” CAPABILITIES
Capability Limitations
Creo Simulate limited model size (200 surfaces), process wizard UI, and partial access to loads and constraint types
Creo Manufacturing basic 2 ½ -axis milling of prismatic parts in 5-axis positioning, partial icon-driven UI
Creo Schematics scaled down version of Creo Schematics (included with Creo PCX)
Creo HMX limited number of connectors (5) and wires (50), partial reporting and features (included with Creo PCX)
ECAD Collaboration bi-directional data exchange with printed circuit board solutions
Creo Photorender real-time rendering powered by Luxion Keyshot
23. 26
CREO PRODUCT INSIGHT EXTENSION
Design for connectivity to capture relevant data streams and return real-world
data from physical objects
Who Needs It?
Any customer that wants to obtain real-world product data and validate critical
values throughout the product development process
Business Value
• Use real-world data to support engineering and other business functions
− Improve new Product Designs – validate and replace assumptions with real-world data
− Improve New Smart Product Design – optimize the use of sensors to capture and collect data for downstream
consumption
− Improve Existing and Next Generation Product Designs – identify and correct design flaws to improve current and next
generation products
− Enable Extended Organization with the Right Data Streams – support new revenue streams and opportunities
positioning connected products to provide pro-active service and support
Process
Improvement
• Define smart, connected products to obtain real-world product data
and customer usage information
Technology/
Capability
• Specialized functionality to define physical and virtual sensors to support
data capture (measure), calculation and reporting
• Seamless connection and access to data via data files
• Seamless connection and access to data via ThingWorx
24. 27
CREO AR DESIGN SHARE
Easily create and securely share AR experiences managing models and viewer access
Who Needs It?
Every customer that needs to securely communicate, collaborate and share CAD data with
engineers, suppliers, partners and non-CAD users
• Fully control authoring and accessibility of your company’s AR experiences
Business Value
• Enhance the customer experience using AR to visualize
products in the real world
• Enable virtual design collaboration using AR to facilitate
effective design reviews
• Solicit and apply expertise and knowledge using AR to
connect disparate teams
• Enable non-CAD users to interact, explore and engage
using AR
• Protect IP by preventing access to CAD data
Process
Improvement
• Design communication, collaboration and review
• AR model and viewer administration
Technology/
Capability
• AR Setup, Publishing, Distribution and Viewing via
Vuforia View
• Secure management of AR models and viewer access
25. 28
CREO COLLABORATION EXTENSIONS
Easily integrate and work with data from CATIA V4/V5, SolidWorks, Siemens NX
and Inventor
Who Needs It?
Every customer that needs to integrate and work with data from
CATIA, SolidWorks, Siemens NX and Inventor
Business Value
• Reduce product cost
• Reduce time-to-market
• Reduce product development cost
• Improve product quality and innovation
Process
Improvement
• Multi-CAD Design Collaboration and Consolidation
− CATIA V4, CATIA V5, SolidWorks, Siemens NX and Inventor
Technology/
Capability
• PTC Creo Collaboration Extensions are available for CATIA
V4, CATIA V5, SolidWorks, Siemens NX and Inventor
− “Save As” native CATIA V4/V5, SolidWorks and
Siemens NX file formats
Note: Inventor Collaboration Ext. does NOT support Save
As
− Automatically detect and update out of date
information
26. 2929
CREO UNITE TECHNOLOGY
Format Import Open Update Save As
CATIA V4
CATIA V5
Siemens NX /
Unigraphics NX
SolidWorks
JT
CADDS 5
Creo Elements/Direct
STEP
Autodesk Inventor
Rhinoceros
SolidEdge
AutoCAD DXF
AutoCAD Drawing
Base license of Creo
Parametric
For the latest support information, please view the
compatibility matrix.
NEW IN CREO 5.0
Requires Collaboration
Extension Purchase
Requires Creo Interface
for JT
27. 30
CREO FLEXIBLE MODELING (FMX)
Capabilities to directly edit any 3D geometry in Creo
Parametric
Who Needs It?
All customers that need to work with and edit multi-CAD from
suppliers, partners and extended design teams
Business Value
• Reduce time-to-market
• Reduce product development cost
• Improve product quality and innovation
Process
Improvement
• Multi-CAD Design
• Late Stage and Unexpected Change
• Rapid Design Exploration and Reuse
• Model Prep and Simplification
Technology/
Capability
• Support multi-CAD Collaboration and
Consolidation efforts
• Rapidly implement late stage and
unexpected design change
• Speed design exploration and enable CAD
data reuse
• Prepare models for analysis and downstream
use
28. 32
CREO LEGACY DATA MIGRATION EXTENSION (LMX)
Support legacy data migration and CAD consolidation efforts
Who Needs It?
Companies that need to migrate IP (models) and
documentation (drawings) from legacy CAD
systems to PTC Creo LDA addresses the issues or
cost and accuracy which are the major roadblocks
to Legacy Data Migration
Business Value
• Reduce product costs
• Reduce time-to-market
• Reduce product development cost
Process
Improvement
• Legacy data migration and conversion
− LDA provides three levels of association
Model – View – Annotation
Technology/
Capability
• Legacy Drawing Associator (LDA) – automatically connects parametric models
to imported legacy data
− Relink model and drawing to provide associativity (update) and association
when checked into Windchill PDMLink
• Annotation Convertor (AC) – Automatically convert drawing dimensions and
notes to 3D annotations
• Assembly Collapse Configuration (ACC) – Recreate representation as simplified-
reps and explode states in Creo
29. 36
CREO RENDER STUDIO (EXTENSION and APP)
Produce photorealistic images for design review, market collateral, product packaging
and consumer testing
Note: When the App is purchased the customer gets the standalone
functionality AND the ability to run as Creo Render Studio Extension
Who Needs It?
All customers that create product images for
design review, marketing collateral and product
documentation
Business Value
• Lower product cost
• Increase product revenue – first time build success
• Enhance product communication and marketing
collateral
Process
Improvement
• Product rendering and collateral creation
• Design review and product evaluation
Technology/
Capability
• Real-time Raytracing powered by Luxion Keyshot
• Enhanced lighting with High Dynamic Range Image (HDRI)
support
• Light attenuation and light fall off
• Support for caustics, final gathering and global illumination
• Image, texture and decal mapping
• Standard library of over 200 predefined materials types
30. 38
CREO DESIGN EXPLORATION EXTENSION (DEX)
Rapidly create and explore concepts and modeling alternatives
Who Needs It?
Every customer that strives to create
and foster an environment that
encourages design exploration,
innovation and creativity
Business Value
• Reduce time-to-market
• Reduce product development
cost
• Improve product quality and
innovation
Process
Improvement
• Design exploration
• Design review and evaluation
• Change investigation and
exploration
Technology/
Capability
• Rapidly explore and evaluate design ideas and modeling alternatives
− Safely explore options and ideas using checkpoints to manage files and capture design history
• Conduct interactive design reviews using saved DEX session data to review concepts and ideas
− No need to clear in-session data, change folders and reload geometry
• Easily investigate changes and implement change using “Explore Update” to eliminate risk
31. 39
CREO ADVANCED ASSEMBLY (AAX)
Capabilities to facilitate and support concurrent design and development
Who Needs It?
All customers that requires top-down design tools
to capture design intent and manage the
concurrent design process
Business Value
• Reduce time-to-market
• Reduce product development cost
• Improve product quality and innovation
Process
Improvement
• Concurrent design using top-down design
• Data sharing and distribution
• Reference control
• Change propagation
Technology/
Capability
• Define and manage design intent
• Securely share and communicate design
criteria
• Establish and enforce design best practices
• Implement predictable change
32. 41
CREO ADVANCED FRAMEWORK DESIGN (AFX)
Speed design and improve the accuracy of structural framework assemblies
Who Needs It?
All customers that create structural framework assemblies for building
structures, machinery and assembly lines
Business Value
• Reduce time-to-market
• Reduce product development cost
• Improve product quality and innovation
Process
Improvement
• Structural framework design
• Fastener assembly
• Weldment design
Technology/
Capability
• Intuitive, easy to use process driven UI
• Fully integrated modeling, framework
design and analysis
• Comprehensive and customizable libraries of profiles,
joints, connections and equipment
• Automated beam placement and creation of
framework geometry (e.g., joints, connections)
• Automated creation of BOMs, production drawings and
fabrication data
33. 42
CREO INTELLIGENT FASTENER EXTENSION (IFX)
Capabilities to automate fastener geometry creation and hardware assembly
Who Needs It?
The target customer creates products that require
assembly fabrication and/or scheduled service
and maintenance
• Fastener assembly allows equipment to be
assembled and dis-assembled for transport,
service and maintenance
Business Value
• Reduce time-to-market
• Reduce product development cost
Process
Improvement
• Fastener standardization and selection
• Clearance and alignment geometry creation
• Fastener and configuration hardware assembly
• Fastener validation
Technology/
Capability
• Rapid fastener and hardware selection
• Automatic creation of fastener geometry
• Automatic placement of fastener and
configuration hardware
34. 44
CREO PIPING AND CABLING DESIGN (PCX)
Create and optimize routings for cost, manufacturability and service
Who Needs It?
Any customer that requires integral 3D routing
capabilities to optimize manufacturing, cost
and serviceability
Business Value
• Reduce time-to-market
• Reduce product development cost
• Lower lifecycle cost (optimize routings for service
and manufacturability)
Process
Improvement
• 3D cable and pipe routing and optimization
• Verification and validation (2D schematic logic)
• Automated creation of manufacturing deliverables
Technology/
Capability
• Automated routing referencing 2D Schematic
logic
• Easily visualize and edit using drag handles and
on-the-fly editing
• Ability to compare/validate 3D data against 2D
schematic logic
• Fast creation of fully associative drawings and
manufacturing deliverables
35. 48
ENGINEERING NOTEBOOK POWERED BY PTC MATHCAD
Capabilities to connect geometry calculations and documentation to Creo data
Who Needs It?
Any customer that wants to document design
intent and use engineering calculations to
support analysis driven design, verification and
validation
Business Value
• Reduce time-to-market
• Reduce product development cost
• Improve product quality and innovation
Process
Improvement
• Document design intent
• Support analysis driven design
• Enable design verification and validation
Technology/
Capability
• Capture design intent inside your model
− Mathcad worksheets are embedded and saved with
the Creo model or assembly
• Create smart geometry driven by calculations
• Analyze and validate geometry using parameter driven
calculations
36. 60
CREO HUMAN FACTORS EXTENSION
Validate and optimize products for human interaction, usability and safety
Who Needs It?
Customers that need to optimize products for human interaction,
safety, comfort and usability
Business Value
• Reduce time-to-market
• Reduce product development cost
• Validate product usability and human interaction
Process
Improvement
• Perform “worst case analysis” using single
direction i.e., 1D tolerance analysis
Technology/
Capability
• Quickly insert and customize digital human models
− Manikin libraries speed the selection and reuse of
manikin data
• Easily manipulate manikin posture using standard Creo
Parametric functionality
• Define vision cones and reach enveloped to validate design
considerations and field of view
− Create vision windows to “see” what the manikin can see
37. 61
CREO HUMAN FACTORS ANALYSIS EXTENSION
Validate designs and demonstrate compliance with safety, health and
workplace standards
Who Needs It?
Customers that need to analyze human interaction and
demonstrate compliance with safety, health and workplace
standards
Business Value
• Standards compliance
• Reduce time-to-market
• Reduce product development cost
Process
Improvement
• Conformance with safety, health and workplace
standards
Technology/
Capability
• Validate designs against workplace standards and guidelines for:
− Material Handling (RULA), Pushing/Pulling (Snook), Lifting/Lowering
(Snook), Carrying (Snook) and Lifting/Lowering (NIOSH)
• Define and save manikin postures associated with the analysis
− Reuse and apply saved positions for target populations
• Identify and validate acceptable limits for the desired population
− Reuse and repeat the analysis for different populations and criteria
38. 7474
CREO PRISMATIC AND MULTI-SURFACE MILLING EXTENSION
Achieve the highest quality, highest precision machining in the fastest time
possible
Who Needs It?
Any customer that manufactures prototype products and/or tooling for
plastic injection molded and casted components
• High speed machining is effective for machining intricate core and
cavity geometries in mold machining, and for quickly machining large,
complex structural components out of solid blocks of aluminum
Business Value
• Accelerate time-to-market
• Reduce development and manufacturing costs
• Improve quality of manufactured products
• Increase customer satisfaction and win new business
Process
Improvement
• Multi-surface 3-axis milling with 4- and 5-axis positioning
• High speed machining (for rapid prototyping and manufacturing)
Technology/
Capability
• Integral CAD/CAM supporting concurrent design and manufacturing
• Automatic change propagation and associative update of NC toolpaths
• Eliminate data translation and errors
• Automated creation of manufacturing process documentation
74