Creating Orthophotos ( Process Flow )
•
1 like•2,288 views
Orthorectification transforms the central projection of the photograph into an orthogonal view of the ground, thereby removing the distorting effects of tilt and terrain relief. The by-product of orthorectification process is orthoimage or orthophotos.
Report
Share
Report
Share
Recommended
Lecture 08 tilted photograph
This document discusses tilted aerial photographs. It begins by defining tilted photographs as those where the camera axis is slightly angled from vertical when capturing the image, usually by less than 3 degrees. It then introduces exterior orientation parameters (EOPs) that define the spatial position and angular orientation of each photograph. Two systems for defining angular orientation are described: tilt-swing-azimuth and omega-phi-kappa. Perspective projection and how it relates 3D objects to their 2D image is also overviewed. The remainder of the document discusses how to calculate scale on tilted photographs based on factors like tilt, swing, height, and elevation.
Vertical aerial photographs
The document discusses various concepts relating to vertical aerial photographs, including:
- Focal length is the distance from the focal plane to the center of the camera lens, and the angle of coverage increases as focal length decreases.
- Fiducial marks define the coordinate axes and geometric center of an individual photograph. The principal point is the intersection of the fiducial marks.
- There are three important photo centers: the principal point, nadir, and isocenter. Different types of distortion and displacement radiate from each center.
- Distortion alters the perspective of images while displacement does not. Lens distortion and tilt displacement are examples discussed in more detail.
Electronic distance measurement (EDM)
Edm is a surveying instrument used to measure the distance electronically. This Surveying Instrument is used in triangulation to measure the length of Base line because more accuracy is required to measure the length of base line.
Drone flight data processing
This document discusses principles and practices of drone flight planning for photogrammetry purposes. It explains that overlapping photos are needed to reconstruct 3D geometry through structure from motion algorithms. The key stages of SfM processing are described, including feature detection, sparse and dense reconstruction, meshing, and texturing. Several open-source SfM software options are listed as alternatives to commercial programs. Limitations of SfM related to feature similarity, non-Lambertian surfaces, and thin structures are also noted.
Airborne Laser Scanning Technologies
The document summarizes recent developments in airborne laser scanning technologies. It discusses improvements such as increased data acquisition rates enabled by higher pulse repetition rates and scan rates. It also covers developments like multiple return recording and full waveform digitization. Integration of digital cameras to provide higher quality imagery is also described. Overall, technologies have advanced to allow for higher point densities, altitudes, and accuracies in airborne laser scanning systems.
Close range photogrammetry avinash
Close range photogrammetry uses terrestrial photographs taken from the earth's surface to measure objects within 300 meters. It has been used in architecture since 1885 to record buildings and monuments, reconstruct damaged structures, and determine deformations and changes. There are three types of analogue instruments used - normal case plotters, universal plotters, and mapping plotters. Cameras are classified based on the presence of fiducial marks and include metric and non-metric cameras. Stereometric camera systems from 1920-1960 were applied to fields like architecture, archaeology, and engineering but had limitations due to restricted camera choices and fixed projection angles. Close range photogrammetry provides advantages like non-contact measurement, rapid data capture, ability to measure deform
Photogrammetry-part 2
This document discusses photogrammetry and its applications. It describes the different types of aerial photographs based on lens systems and film properties. It then lists several applications of aerial photogrammetry including forestry, geology, agriculture, urban planning, and military intelligence. Finally, it explains some key principles of photogrammetry including central projection, orthogonal projection, stereo pairs, principal points, and fiducial marks.
Introduction to Aerial Photogrammetry
Aerial surveying technology is utilized in a wide range of fields throughout the world. These range from the creation of maps, to terrain analysis and research (rivers, soil erosion, coasts, etc.), urban planning, road planning (roads, rails, etc.), and vegetation research (forests, agriculture, lakes and marshland, etc.).
Recommended
Lecture 08 tilted photograph
This document discusses tilted aerial photographs. It begins by defining tilted photographs as those where the camera axis is slightly angled from vertical when capturing the image, usually by less than 3 degrees. It then introduces exterior orientation parameters (EOPs) that define the spatial position and angular orientation of each photograph. Two systems for defining angular orientation are described: tilt-swing-azimuth and omega-phi-kappa. Perspective projection and how it relates 3D objects to their 2D image is also overviewed. The remainder of the document discusses how to calculate scale on tilted photographs based on factors like tilt, swing, height, and elevation.
Vertical aerial photographs
The document discusses various concepts relating to vertical aerial photographs, including:
- Focal length is the distance from the focal plane to the center of the camera lens, and the angle of coverage increases as focal length decreases.
- Fiducial marks define the coordinate axes and geometric center of an individual photograph. The principal point is the intersection of the fiducial marks.
- There are three important photo centers: the principal point, nadir, and isocenter. Different types of distortion and displacement radiate from each center.
- Distortion alters the perspective of images while displacement does not. Lens distortion and tilt displacement are examples discussed in more detail.
Electronic distance measurement (EDM)
Edm is a surveying instrument used to measure the distance electronically. This Surveying Instrument is used in triangulation to measure the length of Base line because more accuracy is required to measure the length of base line.
Drone flight data processing
This document discusses principles and practices of drone flight planning for photogrammetry purposes. It explains that overlapping photos are needed to reconstruct 3D geometry through structure from motion algorithms. The key stages of SfM processing are described, including feature detection, sparse and dense reconstruction, meshing, and texturing. Several open-source SfM software options are listed as alternatives to commercial programs. Limitations of SfM related to feature similarity, non-Lambertian surfaces, and thin structures are also noted.
Airborne Laser Scanning Technologies
The document summarizes recent developments in airborne laser scanning technologies. It discusses improvements such as increased data acquisition rates enabled by higher pulse repetition rates and scan rates. It also covers developments like multiple return recording and full waveform digitization. Integration of digital cameras to provide higher quality imagery is also described. Overall, technologies have advanced to allow for higher point densities, altitudes, and accuracies in airborne laser scanning systems.
Close range photogrammetry avinash
Close range photogrammetry uses terrestrial photographs taken from the earth's surface to measure objects within 300 meters. It has been used in architecture since 1885 to record buildings and monuments, reconstruct damaged structures, and determine deformations and changes. There are three types of analogue instruments used - normal case plotters, universal plotters, and mapping plotters. Cameras are classified based on the presence of fiducial marks and include metric and non-metric cameras. Stereometric camera systems from 1920-1960 were applied to fields like architecture, archaeology, and engineering but had limitations due to restricted camera choices and fixed projection angles. Close range photogrammetry provides advantages like non-contact measurement, rapid data capture, ability to measure deform
Photogrammetry-part 2
This document discusses photogrammetry and its applications. It describes the different types of aerial photographs based on lens systems and film properties. It then lists several applications of aerial photogrammetry including forestry, geology, agriculture, urban planning, and military intelligence. Finally, it explains some key principles of photogrammetry including central projection, orthogonal projection, stereo pairs, principal points, and fiducial marks.
Introduction to Aerial Photogrammetry
Aerial surveying technology is utilized in a wide range of fields throughout the world. These range from the creation of maps, to terrain analysis and research (rivers, soil erosion, coasts, etc.), urban planning, road planning (roads, rails, etc.), and vegetation research (forests, agriculture, lakes and marshland, etc.).
Remote sensing
Element Of Civil Engineering subject as per GTU syllabus 1st sem carry out all content. also usefull for general idea about civil branch.
Scale of photograph (Aerial Photogrammetry)
This presentation discusses scales used in photographs. It explains that scale is the ratio of an object's size in a photo to its actual size on the ground. Scale can be expressed through a unit equivalent, representative fraction, or ratio. Knowing the camera focal length and aircraft altitude allows one to determine the scale of a vertical photograph. The presentation was given by Mr. Amol V. Ghogare of SRES, SCOE, Kopargaon on the topic of scales used in photographs.
UAV/Drone survey and its methodology and applications
This document outlines a presentation on drone surveys. It introduces different types of surveying techniques, including traditional surveying and aerial surveying using drones. It discusses the components and sensors of drones, as well as their applications. The document outlines the advantages of drones for quick, low-cost surveying but also notes disadvantages like regulations and limited battery life. It describes the process of field data collection, image processing, and accuracy assessment when using drones for surveying projects. Finally, it provides examples of drone survey projects in Nepal.
Errors and biases in gps
Errors and biases in GPS measurements arise from a variety of sources including satellite positions, weather, multipath, timing errors, and signal propagation through the atmosphere. These errors are broadly classified as those originating from satellites (ephemeris, clock errors), receivers (clock errors, multipath, noise), and signal propagation (ionospheric and tropospheric delays). Selective availability intentionally added error for non-authorized users until being discontinued in 2000. Differential GPS and other techniques can help reduce or eliminate some biases to achieve sub-meter accuracy.
Flight planning (aerial Photogrammetry)
flight Planning , Focal length of Camera , time of exposure,ground speed of aircraft, area to be covered
Distortions and displacement on aerial photograph
This document discusses various types of distortions that can occur in aerial photographs. It defines distortion as a shift in the position of landscape features that alters the perspective of the image. Displacement is defined as any shift that does not change the perspective. The document outlines different types of distortions including lens distortion, relief displacement caused by elevation differences, and tilt distortions from aircraft motion like roll, crab, and pitch. It also discusses parallax, orthorectification to remove distortions, and parameters that influence relief displacement.
SURVEYING - Photogrammetry (CE 115) Lec2 By Afia Narzis Spring 2016
Photogrammetry is a method of surveying that uses photographs to prepare maps and plans. There are two main types: terrestrial photogrammetry uses ground-based photos, while aerial photogrammetry uses photos taken from aircraft. Aerial photogrammetry involves advanced planning, flying missions to take overlapping vertical photos with specialized cameras, conducting ground control surveys, and compiling the photos into maps. It is used for tasks like topographic mapping, infrastructure planning, and military surveillance.
Aerial /Drone survey
This document outlines the methodology for an aerial survey project, including identifying the area of interest, obtaining necessary flight permissions, setting up ground control stations, conducting the aerial survey, processing the aerial data to create orthophotos and maps, and delivering the final digital data and reports. Key steps involve planning the flight path, capturing high-resolution aerial images, using GPS and camera data to orient the images, mosaicking orthophotos, extracting mapped features, and providing deliverables such as imagery, terrain models, and maps.
Photogrammetry Survey- Surveying II , Civil Engineering Students
Photogrammetry is the science of making measurements from photographs. It involves planning and taking photographs, processing the photographs, and measuring the photographs to produce results like maps and 3D models.
There are two main types of photographs used in photogrammetry - terrestrial and aerial photographs. Terrestrial photographs are taken from ground-based camera stations using a phototheodolite. Aerial photographs are taken from an airborne camera mounted on an aircraft and can be vertical or oblique.
Key applications of photogrammetry include topographic mapping, engineering surveys, geological mapping, and urban and regional planning due to its ability to cover large areas quickly and accurately.
Application of GPS in mining
GPS technology is increasingly being used in mining for navigation, surveying, tracking, and safety applications. The key components of a GPS system include space, user, and control segments. Satellites in the space segment transmit signals to receivers in the user segment. The control segment maintains satellite functioning. In mining, GPS guides heavy machinery, drill rigs, haul trucks, and monitors driver behavior. It improves efficiency by optimizing digging, loading, and dumping schedules. However, errors from setup, equipment, and satellite signals require high-precision GPS for accuracy within 200mm. Overall, GPS adoption enhances safety while increasing productivity of mining operations.
Rankin LiDAR presentation
LiDAR uses laser light to rapidly create high-resolution 3D models of objects and terrain. It has largely replaced photogrammetry for topographic mapping due to its ability to collect data day or night and its direct measurement of ground surfaces. While public LiDAR datasets are useful for planning, private firms can benefit more from terrestrial and aerial LiDAR for detailed civil engineering and surveying projects. LiDAR allows rapid mapping of complex sites and piping networks to support master planning, grading, utilities, and other design work.
photogrammetry
Photogrammetry is defined as obtaining reliable information about physical objects and environments through processing photographic images. It has its origins in 1851 when the first photogrammetrical devices and methods were developed. Key developments included the first congress on photogrammetry in 1913 and the rise of digital photogrammetry in the 1980s due to improvements in computer hardware and software. Photogrammetry uses triangulation by taking photos from different locations to develop lines of sight and mathematically intersect them to produce 3D coordinates of points of interest. It has various applications including land surveying, medical imaging, military operations, traffic engineering, and structural analysis.
Digital photogrammetry
This document discusses digital photogrammetry. It begins by explaining that digital photogrammetry uses digital images that are stored and processed on a computer, rather than hard copy photos. These digital images can come from satellites, airplanes, or cameras. The document then discusses some applications of digital photogrammetry like topographic mapping and creating orthophotos, digital elevation models (DEMs), and virtual landscapes. It also notes that nadir imagery and image overlap are needed to provide 3D information. Finally, the document lists some common products of digital photogrammetry such as maps, DEMs, and virtual landscapes.
Photogrammetry-part 1
Aerial photography – Types of aerial cameras,
Types of photographs, vertical, horizontal, oblique.
Lecture01: Introduction to Photogrammetry
This is an introduction to Photogrammetry. Lectures prepared for Duhok University's students, surveyign Department.
Lecture 1-aerial photogrammetry
aerial photogrammetry, vertical photographs, oblique photographs, low photographs, scale of photo graphs, remote sensing,
Understanding Coordinate Systems and Projections for ArcGIS
Everything you need to know to work with coordinate systems and projecting data in ArcGIS. The presentation starts by explaining the terminology, and then discusses the details you need to know to actually work successfully with coordinate systems, use the proper projections, and geographic transformations. This is a very practical look at a complex subject.
GPS surveying/DIGITAL SURVEYING
The document discusses GPS surveying and related topics. It covers the shape of the Earth, different types of surveying including plane, geodetic and GPS surveying. It describes the components of a GPS system including antennas, receivers, controllers and satellites. It discusses positioning methods like single point, relative positioning. It also covers GPS coordinates, height systems, signals, codes and different types of receivers. GPS software and measurement techniques are also summarized along with ongoing modernization of GPS.
Accuracy checks in the production of orthophotos
This document summarizes the process of creating an orthophoto and factors that affect its geometric accuracy. It describes preparing input data like aerial photos, camera calibration, and ground control points. It then details the steps of interior and exterior orientation, automatic DTM generation with editing, and orthophoto generation. Accuracy is expected to be within 1 meter horizontally and 0.4 meters vertically based on the input data and DTM error. Planimetric accuracy of digitized features from the orthophoto will also depend on these geometric accuracy factors.
Orthorectification and triangulation
The document discusses orthorectification and triangulation. It defines orthorectification as the process of removing geometric errors from aerial photographs to produce orthophotos that have consistent scale and orthographic projection like a map but also have photographic detail. Triangulation is defined as determining the location of a point by measuring angles to it from other known points, rather than direct measurements. It can be used to orient aerial photographs and produce 3D point measurements. The document provides details on producing orthophotos using DEM data and forward or backward projection methods. It also gives an example of using triangulation to align a block of aerial images.
More Related Content
What's hot
Remote sensing
Element Of Civil Engineering subject as per GTU syllabus 1st sem carry out all content. also usefull for general idea about civil branch.
Scale of photograph (Aerial Photogrammetry)
This presentation discusses scales used in photographs. It explains that scale is the ratio of an object's size in a photo to its actual size on the ground. Scale can be expressed through a unit equivalent, representative fraction, or ratio. Knowing the camera focal length and aircraft altitude allows one to determine the scale of a vertical photograph. The presentation was given by Mr. Amol V. Ghogare of SRES, SCOE, Kopargaon on the topic of scales used in photographs.
UAV/Drone survey and its methodology and applications
This document outlines a presentation on drone surveys. It introduces different types of surveying techniques, including traditional surveying and aerial surveying using drones. It discusses the components and sensors of drones, as well as their applications. The document outlines the advantages of drones for quick, low-cost surveying but also notes disadvantages like regulations and limited battery life. It describes the process of field data collection, image processing, and accuracy assessment when using drones for surveying projects. Finally, it provides examples of drone survey projects in Nepal.
Errors and biases in gps
Errors and biases in GPS measurements arise from a variety of sources including satellite positions, weather, multipath, timing errors, and signal propagation through the atmosphere. These errors are broadly classified as those originating from satellites (ephemeris, clock errors), receivers (clock errors, multipath, noise), and signal propagation (ionospheric and tropospheric delays). Selective availability intentionally added error for non-authorized users until being discontinued in 2000. Differential GPS and other techniques can help reduce or eliminate some biases to achieve sub-meter accuracy.
Flight planning (aerial Photogrammetry)
flight Planning , Focal length of Camera , time of exposure,ground speed of aircraft, area to be covered
Distortions and displacement on aerial photograph
This document discusses various types of distortions that can occur in aerial photographs. It defines distortion as a shift in the position of landscape features that alters the perspective of the image. Displacement is defined as any shift that does not change the perspective. The document outlines different types of distortions including lens distortion, relief displacement caused by elevation differences, and tilt distortions from aircraft motion like roll, crab, and pitch. It also discusses parallax, orthorectification to remove distortions, and parameters that influence relief displacement.
SURVEYING - Photogrammetry (CE 115) Lec2 By Afia Narzis Spring 2016
Photogrammetry is a method of surveying that uses photographs to prepare maps and plans. There are two main types: terrestrial photogrammetry uses ground-based photos, while aerial photogrammetry uses photos taken from aircraft. Aerial photogrammetry involves advanced planning, flying missions to take overlapping vertical photos with specialized cameras, conducting ground control surveys, and compiling the photos into maps. It is used for tasks like topographic mapping, infrastructure planning, and military surveillance.
Aerial /Drone survey
This document outlines the methodology for an aerial survey project, including identifying the area of interest, obtaining necessary flight permissions, setting up ground control stations, conducting the aerial survey, processing the aerial data to create orthophotos and maps, and delivering the final digital data and reports. Key steps involve planning the flight path, capturing high-resolution aerial images, using GPS and camera data to orient the images, mosaicking orthophotos, extracting mapped features, and providing deliverables such as imagery, terrain models, and maps.
Photogrammetry Survey- Surveying II , Civil Engineering Students
Photogrammetry is the science of making measurements from photographs. It involves planning and taking photographs, processing the photographs, and measuring the photographs to produce results like maps and 3D models.
There are two main types of photographs used in photogrammetry - terrestrial and aerial photographs. Terrestrial photographs are taken from ground-based camera stations using a phototheodolite. Aerial photographs are taken from an airborne camera mounted on an aircraft and can be vertical or oblique.
Key applications of photogrammetry include topographic mapping, engineering surveys, geological mapping, and urban and regional planning due to its ability to cover large areas quickly and accurately.
Application of GPS in mining
GPS technology is increasingly being used in mining for navigation, surveying, tracking, and safety applications. The key components of a GPS system include space, user, and control segments. Satellites in the space segment transmit signals to receivers in the user segment. The control segment maintains satellite functioning. In mining, GPS guides heavy machinery, drill rigs, haul trucks, and monitors driver behavior. It improves efficiency by optimizing digging, loading, and dumping schedules. However, errors from setup, equipment, and satellite signals require high-precision GPS for accuracy within 200mm. Overall, GPS adoption enhances safety while increasing productivity of mining operations.
Rankin LiDAR presentation
LiDAR uses laser light to rapidly create high-resolution 3D models of objects and terrain. It has largely replaced photogrammetry for topographic mapping due to its ability to collect data day or night and its direct measurement of ground surfaces. While public LiDAR datasets are useful for planning, private firms can benefit more from terrestrial and aerial LiDAR for detailed civil engineering and surveying projects. LiDAR allows rapid mapping of complex sites and piping networks to support master planning, grading, utilities, and other design work.
photogrammetry
Photogrammetry is defined as obtaining reliable information about physical objects and environments through processing photographic images. It has its origins in 1851 when the first photogrammetrical devices and methods were developed. Key developments included the first congress on photogrammetry in 1913 and the rise of digital photogrammetry in the 1980s due to improvements in computer hardware and software. Photogrammetry uses triangulation by taking photos from different locations to develop lines of sight and mathematically intersect them to produce 3D coordinates of points of interest. It has various applications including land surveying, medical imaging, military operations, traffic engineering, and structural analysis.
Digital photogrammetry
This document discusses digital photogrammetry. It begins by explaining that digital photogrammetry uses digital images that are stored and processed on a computer, rather than hard copy photos. These digital images can come from satellites, airplanes, or cameras. The document then discusses some applications of digital photogrammetry like topographic mapping and creating orthophotos, digital elevation models (DEMs), and virtual landscapes. It also notes that nadir imagery and image overlap are needed to provide 3D information. Finally, the document lists some common products of digital photogrammetry such as maps, DEMs, and virtual landscapes.
Photogrammetry-part 1
Aerial photography – Types of aerial cameras,
Types of photographs, vertical, horizontal, oblique.
Lecture01: Introduction to Photogrammetry
This is an introduction to Photogrammetry. Lectures prepared for Duhok University's students, surveyign Department.
Lecture 1-aerial photogrammetry
aerial photogrammetry, vertical photographs, oblique photographs, low photographs, scale of photo graphs, remote sensing,
Understanding Coordinate Systems and Projections for ArcGIS
Everything you need to know to work with coordinate systems and projecting data in ArcGIS. The presentation starts by explaining the terminology, and then discusses the details you need to know to actually work successfully with coordinate systems, use the proper projections, and geographic transformations. This is a very practical look at a complex subject.
GPS surveying/DIGITAL SURVEYING
The document discusses GPS surveying and related topics. It covers the shape of the Earth, different types of surveying including plane, geodetic and GPS surveying. It describes the components of a GPS system including antennas, receivers, controllers and satellites. It discusses positioning methods like single point, relative positioning. It also covers GPS coordinates, height systems, signals, codes and different types of receivers. GPS software and measurement techniques are also summarized along with ongoing modernization of GPS.
What's hot (20)
UAV/Drone survey and its methodology and applications
UAV/Drone survey and its methodology and applications
SURVEYING - Photogrammetry (CE 115) Lec2 By Afia Narzis Spring 2016
SURVEYING - Photogrammetry (CE 115) Lec2 By Afia Narzis Spring 2016
Photogrammetry Survey- Surveying II , Civil Engineering Students
Photogrammetry Survey- Surveying II , Civil Engineering Students
Understanding Coordinate Systems and Projections for ArcGIS
Understanding Coordinate Systems and Projections for ArcGIS
Viewers also liked
Accuracy checks in the production of orthophotos
This document summarizes the process of creating an orthophoto and factors that affect its geometric accuracy. It describes preparing input data like aerial photos, camera calibration, and ground control points. It then details the steps of interior and exterior orientation, automatic DTM generation with editing, and orthophoto generation. Accuracy is expected to be within 1 meter horizontally and 0.4 meters vertically based on the input data and DTM error. Planimetric accuracy of digitized features from the orthophoto will also depend on these geometric accuracy factors.
Orthorectification and triangulation
The document discusses orthorectification and triangulation. It defines orthorectification as the process of removing geometric errors from aerial photographs to produce orthophotos that have consistent scale and orthographic projection like a map but also have photographic detail. Triangulation is defined as determining the location of a point by measuring angles to it from other known points, rather than direct measurements. It can be used to orient aerial photographs and produce 3D point measurements. The document provides details on producing orthophotos using DEM data and forward or backward projection methods. It also gives an example of using triangulation to align a block of aerial images.
Photogrammetry chandu
Photogrammetry is a technique for obtaining reliable spatial information about physical objects through the processes of recording, measuring, and interpreting image data. It involves taking overlapping aerial photographs from aircraft and processing them to generate digital elevation models, contours, orthophotos, and other geospatial data products. The outputs can be used to create 3D models and accurate maps.
Digital Elevation Models
This document discusses digital elevation models (DEMs), including how they are generated from remote sensing data like satellite imagery and LiDAR, their typical accuracies, and common uses. DEMs can be created from aerial or satellite stereo images, radar interferometry, or terrestrial land surveying. They are used to produce topographic maps and orthophotos, model flooding, perform visibility analysis, and create 3D terrain representations. The quality and resolution of DEMs varies depending on the source data and techniques used.
Principle of aerial photography and types.ppt
Principle of aerial photography and photogrammetry, types of aerial photographs, scale of aerial photograph.
Lecture on photogrammetry
Photogrammetry is the science of obtaining reliable measurements from photographs. There are three main techniques: aerial, using vertically downward photos from planes or satellites; terrestrial, using horizontal photos on the ground; and industrial, adapting terrestrial techniques to small areas. Aerial photos are used for topographic mapping, cadastral plans, land use maps, and hydrographic charts. Stereo plotters allow precise 3D measurement and analysis from stereo photo pairs. Photogrammetry has many applications beyond traditional surveying, including traffic accident reconstruction, medical imaging, and analysis of surface movement.
A Three-Dimensional Representation method for Noisy Point Clouds based on Gro...
A Three-Dimensional Representation method for Noisy Point Clouds based on Gro...Sergio Orts-Escolano
Slides used for the thesis defense of the PhD candidate Sergio Orts-Escolano.
The research described in this thesis was motivated by the need of a robust model capable of representing 3D data obtained with 3D sensors, which are inherently noisy. In addition, time constraints have to be considered as these sensors are capable of providing a 3D data stream in real time.This thesis proposed the use of Self-Organizing Maps (SOMs) as a 3D representation model. In particular, we proposed the use of the Growing Neural Gas (GNG) network, which has been successfully used for clustering, pattern recognition and topology representation of multi-dimensional data. Until now, Self-Organizing Maps have been primarily computed offline and their application in 3D data has mainly focused on free noise models, without considering time constraints. It is proposed a hardware implementation leveraging the computing power of modern GPUs, which takes advantage of a new paradigm coined as General-Purpose Computing on Graphics Processing Units (GPGPU). The proposed methods were applied to different problems and applications in the area of computer vision such as the recognition and localization of objects, visual surveillance or 3D reconstruction.Principle of photogrammetry
This document summarizes the principles of photogrammetry. It discusses the basic elements of photogrammetry including obtaining quantitative information from aerial photographs. It covers topics such as photographic scale, horizontal ground coordinates, relief displacement, exterior orientation of tilted photographs, stereoscopic vision, and the geometry of aerial stereophotographs. The purpose is to provide background information and references to support standards and guidelines for photogrammetric mapping.
Photogrammetry - areaotriangulation
The document summarizes key concepts about aerotriangulation from a lecture on photogrammetry. It discusses that aerotriangulation establishes geometric relationships between overlapping photographs to determine supplemental ground control points. Aerotriangulation can be performed using semianalytical or analytical bundle block methods. The analytical bundle block method represents the geometric relationships between object space, camera positions, and image points in a mathematical model.
Viewers also liked (9)
A Three-Dimensional Representation method for Noisy Point Clouds based on Gro...
A Three-Dimensional Representation method for Noisy Point Clouds based on Gro...
Recently uploaded
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S4 HANA to Public cloud data object differences
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.A Comprehensive Guide to DeFi Development Services in 2024
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Recently uploaded (20)
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloud
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Creating Orthophotos ( Process Flow )
- 1. SBL Geomatics Creating orthophots
- 2. SBL GEOMATICSMapping For An Accessible World Requirements * Ground control points ( GCP) in xyz format * Details to identify GCP * AGPS - IMV Data/ Photo center points) * Camera calibration report * Flight height
- 3. Process Flow ( Creating orthophotos ) Ortho input Aerial Triangulation Stereo Model DEM Extraction & Editing No Yes Orthophoto Generation Seamless mosaic Mosaic Tiling Orthorectified tile in specific Output dimension Is DEM Available?
- 4. Orthophoto Generation Ortho Input Stereo Model DEM Model Orthophoto (output)
- 5. SBL 1st Floor, Leela Infopark Phase II, Kinfra Export Promotion Industrial Park, Kusumagiri P.O, Kakkanad, Cochin, India mail :- gayathril@sblinfo.com Ph:- 91 484 2784057http://www. sblgis.com/photogrammetry_services.aspx