TOOLGAL’S CONSTRUCTION DIAMOND TOOLS
In the construction industry, concrete and concrete-like materials are often required to be processed, cut or demolished. Toolgal is a leading provider of diamond cutting and drilling tools for a wide variety of applications in the construction industry.
Typical applications of Toolgal tools include:
Concrete cutting and drilling
Asphalt and green concrete cutting
Pre-stressed concrete cutting
Concrete brick cutting
Grinding
Toolgal’s metallurgical know-how and ongoing commitment to R&D ensures our offerings provide state-of-the-art technical solutions using the highest quality diamond cutting tools. Toolgal’s advanced technologies and professional tools will help enhance and improve all of your organization construction processes.
Total chain solutions - diamond cutting chains & accessories for cutting pip...Yan Mashov
High Quality Chains
SUPERIOR PERFORMANCE LASER WELDED DIAMOND CHAIN FOR:
General building materials
Firebrick/ Refractories
Reinforced concrete
Stone /Granite
Block/ Sandstone/ Abrasive materials
Coal
Building Bricks
Ductile iron/ Cast iron/ PVC/ HDPE
SPEED – 25% faster than others.
LIFE SPAN – 25% longer life span than others.
IMPROVED USER EXPERIENCE – On each link there is a segment providing smoother cutting and higher output. Diamond segment on each link providing smoother cutting, higher output and less vibration.
BULK CONCEPT – Efficient stock management solution: cut to size and repair capability.
COMPLETE KIT – Provides a compatible answer for most common chain cutting machines.
ACCESSORIES – Compatible high quality guide bars, sprockets and chain parts.
TECHNICAL SUPPORT – Direct from the manufacturer.
Total chain solutions - diamond cutting chains & accessories for cutting pip...Yan Mashov
High Quality Chains
SUPERIOR PERFORMANCE LASER WELDED DIAMOND CHAIN FOR:
General building materials
Firebrick/ Refractories
Reinforced concrete
Stone /Granite
Block/ Sandstone/ Abrasive materials
Coal
Building Bricks
Ductile iron/ Cast iron/ PVC/ HDPE
SPEED – 25% faster than others.
LIFE SPAN – 25% longer life span than others.
IMPROVED USER EXPERIENCE – On each link there is a segment providing smoother cutting and higher output. Diamond segment on each link providing smoother cutting, higher output and less vibration.
BULK CONCEPT – Efficient stock management solution: cut to size and repair capability.
COMPLETE KIT – Provides a compatible answer for most common chain cutting machines.
ACCESSORIES – Compatible high quality guide bars, sprockets and chain parts.
TECHNICAL SUPPORT – Direct from the manufacturer.
DRILLING ACCESSORIES - PRD RIGS INDIA
We manufacture DTH Hammers in different sizes ranging from 3″ to 18″.These hammers are made corresponding to Drilling Hammers to carry out prevalent objectives. These hammers are used in various down the hole operations like bench drilling, foundation drilling, underground production drilling (mining), exploration and civil engineering applications (water well drilling) and many more.
DTH Hammers are available in valve-less model and is competent to operate in harsh conditions. These hammers are conserves energy and offers low cost maintenance. It is extensively used in various sectors owing to its uncomplicated and convenient re-assembly and dis-assembly operations.
We also produce Bits that are sturdy heavy duty tools with simple design.They are designed for maximum performance and for easy maintenance at a minimum cost. Our Bits provide more cutting power and faster rates with heat treatment and tight controlled machining tolerances. Our Bits are available in various models and designs as per the industrial applications.
Our Pole Drill Hammers and Bits are ideally made of superior quality raw material, with an inbuilt characteristic of performing with precision in their specified application. They are long lasting, durable and easily maintainable.
Rohit Industries Group Private Limited, brand name is a first choice among the users of Carbide and HSS cutting tools in India. We offer wide range of Solid Carbide & HSS Cutting tools like Drills, End Mills, Reamers etc.
Esco Weighing and Dispensing Containment Isolators (WDCI)Esco Group
Weighing and Dispensing Containment Isolators (WDCI) are advanced containment systems providing controlled negative pressure environments to maximize personnel protection during weighing and dispensing of potent compounds.
Esco WDCIs provide standard configurable designs able to adapt to various weighing and dispensing quantities and accuracy.
Basic Principles
Turbulent airflow allowing maximum containment with low airflow and therefore improved energy efficiency.
• Low negative pressure to reduce operator fatigue whilst providing maximum containment.
• Stable weighing accuracy as a result of low chamber pressure and flow in conjunction with Anti Vibration platform.
• Contained Pass In / Pass Out systems to allow safe material transfer
Group Mechatronics is India's Largest CNC Machine Manufacturer. It has got three divisions- Prasad NC Machine Systems- Specializes in design and manufacturing of Large size CNC Turning and Machining Centers, Water Jet Germany- Specializes in design and Manufacturing of CNC Abrasive Water Jet Cutting Machines, and VHS Mechatronics- Specializes in Retrofitting and reconditioning of CNC Machines. This presentation gives more insight on the Group Mechatronics.
Prime is SLTL Group’s baseline Laser Cutting Machine designed to provide best value for price in the market. SLTL Group is popular for intervening in the industry with pioneering innovations. The Laser System provides excellent cutting quality and superior productivity. It is turning out to be the favourite of fabricators.
Lets Connect:
SLTL Group - Sahajanand Laser Technology Ltd.
Global Headquarter: E-2, Electronic Estate, G. I. D. C., Sector - 26, Gandhinagar - 382 028 Gujarat, India.
Product Inquiry: mkt@SLTL.com
Mobile: +91-9925036495 (Call + Whatsapp)
Connect Now on Call / Whatsapp - https://bit.ly/9925036495
Telephone: +91-079-61701616
Official Website: www.SLTL.com
#Laser #Fiber #Lasercutter #Sheetcutter #SSsheetcut #Lasercuttingmachine #Laser #SLTLGroup #LaserExperts #TheTrustedBrand #lasercutting #lasermarking #lasercleaning #laserwelding #lasercuttingsystem #lasercuttingmachine #machinetool #IOT #lasertechnology #Fiber #Cuttingmachine #cutting #weldingmachine #Automations #TubeCutting #PipeCutting #Industrylaser #TubeCutting
Sahajanand Laser Technology Ltd. (SLTL Group) is the
largest manufacturer of laser systems in India and world's
first manufacturer of fiber laser cutting machine for sheet
metal application such as Laser cutting, Marking, Welding,
Micro machining, Solar cell scribing / cutting, Scanning,
Diamond processing, Medical equipments, Medical stent
cutting, etc
DRILLING ACCESSORIES - PRD RIGS INDIA
We manufacture DTH Hammers in different sizes ranging from 3″ to 18″.These hammers are made corresponding to Drilling Hammers to carry out prevalent objectives. These hammers are used in various down the hole operations like bench drilling, foundation drilling, underground production drilling (mining), exploration and civil engineering applications (water well drilling) and many more.
DTH Hammers are available in valve-less model and is competent to operate in harsh conditions. These hammers are conserves energy and offers low cost maintenance. It is extensively used in various sectors owing to its uncomplicated and convenient re-assembly and dis-assembly operations.
We also produce Bits that are sturdy heavy duty tools with simple design.They are designed for maximum performance and for easy maintenance at a minimum cost. Our Bits provide more cutting power and faster rates with heat treatment and tight controlled machining tolerances. Our Bits are available in various models and designs as per the industrial applications.
Our Pole Drill Hammers and Bits are ideally made of superior quality raw material, with an inbuilt characteristic of performing with precision in their specified application. They are long lasting, durable and easily maintainable.
Rohit Industries Group Private Limited, brand name is a first choice among the users of Carbide and HSS cutting tools in India. We offer wide range of Solid Carbide & HSS Cutting tools like Drills, End Mills, Reamers etc.
Esco Weighing and Dispensing Containment Isolators (WDCI)Esco Group
Weighing and Dispensing Containment Isolators (WDCI) are advanced containment systems providing controlled negative pressure environments to maximize personnel protection during weighing and dispensing of potent compounds.
Esco WDCIs provide standard configurable designs able to adapt to various weighing and dispensing quantities and accuracy.
Basic Principles
Turbulent airflow allowing maximum containment with low airflow and therefore improved energy efficiency.
• Low negative pressure to reduce operator fatigue whilst providing maximum containment.
• Stable weighing accuracy as a result of low chamber pressure and flow in conjunction with Anti Vibration platform.
• Contained Pass In / Pass Out systems to allow safe material transfer
Group Mechatronics is India's Largest CNC Machine Manufacturer. It has got three divisions- Prasad NC Machine Systems- Specializes in design and manufacturing of Large size CNC Turning and Machining Centers, Water Jet Germany- Specializes in design and Manufacturing of CNC Abrasive Water Jet Cutting Machines, and VHS Mechatronics- Specializes in Retrofitting and reconditioning of CNC Machines. This presentation gives more insight on the Group Mechatronics.
Prime is SLTL Group’s baseline Laser Cutting Machine designed to provide best value for price in the market. SLTL Group is popular for intervening in the industry with pioneering innovations. The Laser System provides excellent cutting quality and superior productivity. It is turning out to be the favourite of fabricators.
Lets Connect:
SLTL Group - Sahajanand Laser Technology Ltd.
Global Headquarter: E-2, Electronic Estate, G. I. D. C., Sector - 26, Gandhinagar - 382 028 Gujarat, India.
Product Inquiry: mkt@SLTL.com
Mobile: +91-9925036495 (Call + Whatsapp)
Connect Now on Call / Whatsapp - https://bit.ly/9925036495
Telephone: +91-079-61701616
Official Website: www.SLTL.com
#Laser #Fiber #Lasercutter #Sheetcutter #SSsheetcut #Lasercuttingmachine #Laser #SLTLGroup #LaserExperts #TheTrustedBrand #lasercutting #lasermarking #lasercleaning #laserwelding #lasercuttingsystem #lasercuttingmachine #machinetool #IOT #lasertechnology #Fiber #Cuttingmachine #cutting #weldingmachine #Automations #TubeCutting #PipeCutting #Industrylaser #TubeCutting
Sahajanand Laser Technology Ltd. (SLTL Group) is the
largest manufacturer of laser systems in India and world's
first manufacturer of fiber laser cutting machine for sheet
metal application such as Laser cutting, Marking, Welding,
Micro machining, Solar cell scribing / cutting, Scanning,
Diamond processing, Medical equipments, Medical stent
cutting, etc
TOOLGAL offers a wide range of bond types that suit professional drilling&sawing jobs worldwide.
We supply segments for :
- core drills bits
- rings for small diameter core drills
- wall saws
- floor saws
- pre-stresed concrete blades
- grinding plates
- special applicatons
Hydra Solid Carbide Replaceable Head Drillsdario furlato
Dormer Interchangeable solid carbide head drills for high performance machining of steels, stainless steels and cast iron. Proven in drilling structural steel beams used in the construction industry. One of the most reliably accurate interchangeable head drills available. Fail-safe head location can be changed without ejecting the drill from the machine. Available with coolant feed across the full range and a choice of HSS bodies to support drilling to 3xD, 5xD and 8xD
New Ideas and techniques, with superior quality. We produce standard tools as well as special tools and Machineries for concrete cutting, such as Construction industry. Concrete cutting Diamond Blades, Asphalt Cutter, Concrete & Reinforced Cutting diamond wire, Core drill bits, Core drill bit Segments, Road cutting machines, Wall Cutting Machines and Core drilling machine.
We offer high precision rolls for Tube Mills. The rolls are made of EN-31 / High Carbon High Chrome ( D2, D3 ) and are hardened for longer life. We offer roll sets for manufacturing tubes/pipes OD range from 1/2" to 14".
Torlins has been a leading drilling strings manufacturers for many years. We provide ZT series Drilling Collar are used for push the drilling bits during drilling operation.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
2. In the construction industry, concrete and concrete-like materials are often required
to be processed, cut or demolished. Toolgal is a leading provider of diamond
cutting and drilling tools for a wide variety of applications in the construction
industry.
Typical applications of Toolgal tools include:
Concrete cutting and drilling, Asphalt and green concrete cutting, Pre-stressed
concrete cutting, Concrete brick cutting and grinding
Toolgal’s metallurgical know-how and ongoing commitment to R&D ensures our
offerings provide state-of-the-art technical solutions using the highest quality
diamond cutting tools.
Toolgal’s advanced technologies and professional tools will help enhance and
improve all of your organization construction processes.
Typical Tools
Floor Saws, Diamond Wall Saw Blades, Ring Saws, Diamond Core Drills, Diamond
Dry Cutting Blades, Chain Saws, Pre-stressed Concrete Saws, Table Saws
TOOLGAL’S CONSTRUCTION DIAMOND TOOLS
2 TOOLGAL industrial diamond tools
4. TOOLGAL’S Quality Control
ƒƒ Quality System in Toolgal assures the same quality level of products and
processes by permanent control and reducing dependence from human,
equipment and materials Variance Factors.
ƒƒ Each station in Toolgal performs In-process Self-inspection under supervise of
Quality Engineer according to Control Plan
ƒƒ The Control Plan is defined according to customer, engineers and legal
requirements and is attached by drawings and specifications
ƒƒ All Quality Data is reported, investigated (per each work order) and reviewed
periodically in the Quality meetings.
4 TOOLGAL industrial diamond tools
6. 6 TOOLGAL industrial diamond tools
Saws
Drills
Chain
Floor Saws Cured Concrete Saws Wide Slot
Cost effective - Toolgal’s wide slot saw provides the fastest floor sawing solution,
in addition to improving cooling and slurry evacuation.
Diameter: From 300 – 900 mm
Floor saw blades come in the following machine categories:
Electrical machines (usually low HP)
Petrol, up to 20 HP
Petrol, 20 - 35 HP
Large Diesel Machines (usually above 50 HP)
Basically floor types can be divided as follows: Concrete, Asphalt and Asphalt over
Concrete (green or fresh concrete is cut with saws similar to Asphalt and Asphalt-
Over-Concrete saw types).
Floor Wide Slot Saw Table
A variety of U/C protection solutions are available for abrasive materials, as per the
recommendations in the table below.
Toolgal’s Floor Saws are recognized industry-wide for their fast and reliable cutting
properties.
Wide Slot Floor Saws-NS
7. 7TOOLGAL industrial diamond tools
Saws
Drills
Chain
Floor Saws
Saws
Cured Concrete Saws Wide Slot
Wide Slot NS Saws
ƒƒ Wide slot blades for extra cutting speed to be used on low powered
machines
ƒƒ Good solution for all types of concrete
ƒƒ NS Blades with under cutting (U/C) protection for abrasive and
porous materials
Floor NS Saws
SegmentsCore: NS
No. of
Segments
HeightThicknessLengthDiameterSerial
Number
188/102.840300FS-NS-30
218/103.140350FS-NS-35
248/103.140400FS-NS-40
268/10440450FS-NS-45
308/10440500FS-NS-50
368/104.640600FS-NS-60
388/104.640650FS-NS-65
408/105.540700FS-NS-70
428/10640750FS-NS-75
468/10640800FS-NS-80
528/106.540900FS-NS-90
Wide Slot NS Saws With U/C Protection
ƒƒ Premium - first choice, large variety of applications
ƒƒ High - high power machines and special long life requirement
Floor NS Saws with U/C Protection
SegmentsCore: NS + U/C
No. of
Segments
HeightThicknessLengthU/CDiameter
Serial
Number
18102.8403C300CS-NS-30-10
21103.1403C350CS-NS-35-10
24103.1404C400CS-NS-40-10
26104404C450CS-NS-45-10
30104405C500CS-NS-50-10
36104.6406C600CS-NS-60-10
40105.5406V700CS-NS-70-10
42106406V750CS-NS-75-10
52106.5406V900CS-NS-90-10
U/C - recommended solutions see table on page 19.
t
TLH
t
TLH
8. 8 TOOLGAL industrial diamond tools
Saws
Drills
Chain
Floor Saws cured concrete saws
Toolgal’s Narrow Slot Floor Saw core configuration provides the advantages of fast
cutting with a long product life - the preferred solution for any floor saw application.
The use of narrow slot saws for concrete floor sawing is applicable for powerful
machines, where the output from a wide slot blade is insufficient. It is uncommon to
use narrow slot saws above 900 mm due to problems with slurry removal.
Narrow Slot Floor Saw Table
A variety of U/C protection solutions are available for abrasive materials, as per the
recommendations in the table below.
The key factors that can influence the quality of the cutting result include:
The Material
ƒƒ Reinforcement ratio (number and diameter of bars)
ƒƒ Aggregate type and size
ƒƒ Percentage of sand and cement
ƒƒ Concrete hardness (density)
The Machine
ƒƒ Machine drive power type (electric, hydraulic, diesel or petrol)
ƒƒ Machine power
ƒƒ Cutting speed and depth
ƒƒ Water supply or air cooling
TOOLGAL offers the right tools for every material and
machine type
ƒƒ Operation Recommendations
ƒƒ Water cooling is always preferred to ensure sufficient cooling.
ƒƒ Optimum peripheral speeds of 40-45 m/s for soft aggregates with a
low reinforcement ratio.
ƒƒ Optimum peripheral speeds of 35-40 m/s for hard aggregates with
a heavy reinforcement ratio.
ƒƒ Operators should employ the optimum machine working parameters,
such as the correct RPM, accessories and maintenance.
Narrow Slot Floor Saws-SS
Narrow Slot
9. TOOLGAL industrial diamond tools
Saws
Drills
Chain
Saws
9
Narrow Slot SS Saws
Narrow Slot SS Saws With U/C Protection
t
TLH
t
TLH
Floor SS Saws
SegmentsCore: SS
No. of
Segments
HeightThicknessLengthDiameterItem code
218/102.840300FS-SS-30
258/103.140350FS-SS-35
288/103.140400FS-SS-40
328/10440450FS-SS-45
368/10440500FS-SS-50
428/104.640600FS-SS-60
468/104.640650FS-SS-65
508/105.540700FS-SS-70
528/10640750FS-SS-75
548/10640800FS-SS-80
648/106.540900FS-SS-90
ƒƒ SS Saw blades for fast cutting while maintaining high output
ƒƒ Mainly used on powerful machines and for highly reinforced concrete
ƒƒ SS Blades with under cutting (U/C) protection for abrasive and porous
materials
ƒƒ Fast - for light (low HP) machines and high cutting speed
ƒƒ Premium - first choice for a large variety of applications
ƒƒ High performance - high power machines and high output requirement
Floor SS Saws with U/C protection
SegmentsCore: SSL U/C
No. of
Segments
HeightThicknessLengthU/CDiameterItem code
21102.8403C300CS-SS-30-10
25103.1405C350CS-SS-35-10
28103.1404C400CS-SS-40-10
32104404C450CS-SS-45-10
36104406C500CS-SS-50-10
42104.6406C600CS-SS-60-10
50105.5405V700CS-SS-70-10
54106406V800CS-SS-80-10
64106.5406V900CS-SS-90-10
Floor Saws Cured Concrete Saws Narrow Slot
10. 10 TOOLGAL industrial diamond tools
Saws
Drills
Chain
ƒƒ Blades for concrete and Asphalt grooving
ƒƒ A wide variety of thicknesses as standard options
ƒƒ Expert solutions for 350 mm and 450 mm diameters
ƒƒ Standard arbor holes are: ø1” with an additional pin hole (1+1)
or 50 mm
ƒƒ Fast - for light (low HP) machines
ƒƒ High performance - high power machines and high output
Loop Cutting
Loop Cutting
No. of
Segments
HeightLengthThickness
(T*)
DiameterItem code
185.5406/8/10/12300LC-NS-30-5.5/T
215.5406/8/10/12350LC-NS-35-5.5/T
245.5406/8/10/12400LC-NS-40-5.5/T
265.5406/8/10/12450LC-NS-45-5.5/T
Loop Cutting Saws
Floor Saws Loop Cutting
øD
H
T
L
ød (H7)
11. 11TOOLGAL industrial diamond tools
Saws
Drills
Chain
Floor Saws
Saws
ƒƒ Fast - for light (low HP) machines and high cutting speed
ƒƒ Premium - first choice for large variety of applications
ƒƒ High Performance - high power machines and special high output
requirement
Green Concrete - Wide Slot
Green Concrete
SegmentsCore: NS
No. of
Segments
HeightThicknessLengthU/CDiameterItem code
188/102.8403C300GC-NS-30
218/103.1403C350GC-NS-35
248/103.1404C400GC-NS-40
268/104404C450GC-NS-45
308/104405C500GC-NS-50
368/104.6406C600GC-NS-60
388/104.6406C650GC-NS-65
Green Concrete - Narrow Slot
Green Concrete
SegmentsCore: SS
No. of
Segments
HeightThicknessLengthU/CDiameterItem code
218/102.8403C300GC-SS-30-10
258/103.1403C350GC-SS-35-10
288/103.1404C400GC-SS-40-10
328/104404C450GC-SS-45-10
368/104406C500GC-SS-50-10
428/104.6406C600GC-SS-60-10
Recommended solutions see table on page 19.
NS cores will be used for fast cutting and low power machines.
SS cores will be used for high output and high power machines.
t
TLH
t
TLH
Green Concrete Saws
Green Concrete Saws
12. 12 TOOLGAL industrial diamond tools
Saws
Drills
Chain
Floor Saws Asphalt and AOC Saws
Asphalt and AOC Saws
Asphalt Saw
New construction, construction extensions and the demolition of asphalt surfaces
require precise separation and cutting-off tasks. The demands required from these
blades are unique, with different features from standard floor saw blades.
All asphalt saw blades are equipped with under cutting protection segments to
reduce premature wear of the saw blade (i.e. the undercutting effect).
Toolgal offers a wide range of 300 – 900 mm cutting blades for wet and dry abrasive
applications with the right U/C protection solution for the application and the
machine.
Laser-welded blades guarantee safe working, and are available upon request for
diameters above 600 mm. Smaller blades are always laser-welded.
ƒƒ High output, achieved by using unique bonds and grits
ƒƒ Large variety of under cutting solutions , using C, R, T and V configurations
ƒƒ Fast - for light (low HP) machines and high cutting speed
ƒƒ Premium - first choice for large variety of applications
ƒƒ High Performance - high power machines and special high output requirement
13. 13TOOLGAL industrial diamond tools
Saws
Drills
Chain
Floor Saws
Saws
Asphalt and AOC Saws
t
TLH
Asphalt And AOC Saws - Wide Slot
Asphalt and AOC Saws in NS cores
SegmentsCore: NS
No. of
Segments
HeightThicknessLengthU/CDiameterItem code
188/102.8403C300AS-NS-30
218/103.1403C350AS-NS-35
248/103.1404C400AS-NS-40
268/104404C450AS-NS-45
308/104405C500AS-NS-50
368/104.6406C600AS-NS-65
388/104.6406C650AS-NS-60
408/105.5406V700AS-NS-70
428/106406V750AS-NS-75
468/106406V800AS-NS-80
528/106.5406V900AS-NS-90
Asphalt And AOC Saws - Narrow Slot
Asphalt and AOC in SS cores
SegmentsCore: SS
No. of
Segments
HeightThicknessLengthU/CDiameterItem code
21102.8403C300AS-SS-30
25103.1405C350AS-SS-35
28103.1404C400AS-SS-40
32104404C450AS-SS-45
36104406C500AS-SS-50
42104.8406C600AS-SS-65
46104.8406C650AS-SS-60
50105.5406V700AS-SS-70
52106406V750AS-SS-75
54106406V800AS-SS-80
62106.5406V900AS-SS-90
Recommended solutions see table on page 19.
t
TLH
15. Saws
Drills
Chain
Saws
15TOOLGAL industrial diamond tools
Wall SawsSaws
Drills
Chain
TOOLGAL WALL SAW
Toolgal Wall Saws are available in large diameters variety and can be adapted to all
machine and concrete types. Wall Saws are available with flush cut patterns and
other arbor configurations, as per the machine.
Many diamond blades require extra holes to be bored into the steel core in addition
to the central bore.
Toolgal offers three basic segments and core configurations with special fast cutting
qualities.
ƒƒ Standard step cutting blades
ƒƒ Thin wall saws for extra cutting speed and low power machines
ƒƒ Three segments configurations for different applications
- Regular.
- T – Turbo.
- S – Split (V shape).
Our optimal wall saw solution uses 4.6 mm thick segments on a 3.5 mm core thickness
with wide slots, to enable better cooling and slurry evacuation.
Blades can be laser-welded up to 900 mm, if required.
Toolgal offers special thin wall saws for low HP machines or quick turnaround cutting
projects. Segments are 3.7 to 4 mm thick on a 2.8 – 3 mm core thickness.
Toolgal offers Step Cutting Wall saws in a 5.5 mm segment thickness, wherever required.
As a market leader in Wall Saws Toolgal can customize solutions to meet customer needs.
Wall Saws
16. 16 TOOLGAL industrial diamond tools
Saws
Drills
Chain
Wall Saws
Wall Saw
DIMENSIONS
No. of
Segments
HeightThicknessLengthCoreDiameterItem code
36104.6403.5600WS-NS-60-10
40104.6403.5700WS-NS-70-10
42104.6403.5750WS-NS-75-10
46104.6403.5800WS-NS-80-10
52104.6403.5900WS-NS-90-10
58104.6403.51000WS-NS-100-10
70104.6403.51200WS-NS-120-10
Standard arbor holes are: ø1” with an additional pin hole (1+1) or ø60 mm
with pin holes.
t
T
LH
Wall Saws - Standard
Standard
17. 17TOOLGAL industrial diamond tools
Saws
Drills
Chain
Saws
t
T
LH
Wall Saws - Thin
ƒƒ Fast - for light (low HP) machines
ƒƒ High performance - high power machines and high output requirement
Wall Saw - thin
DIMENSIONS
No. of
Segments
HeightThicknessLengthCoreDiameterItem code
36103.7402.8600WSt-NS-60-10
40103.7402.8700WSt-NS-70-10
42103.7/4402.8750WSt-NS-75-10
46104403800WSt-NS-80-10
52104403900WSt-NS-90-10
Standard arbor holes are: ø1” with an additional pin hole (1+1) or ø60 mm with
pins per machine.
Wall Saws - Step Cutting
Wall Saw - step cutting
DIMENSIONS
No. of
Segments
HeightThicknessLengthCoreDiameterItem code
36105.5403.5600WSs-NS-60-10
40105.5403.5700WSs-NS-70-10
42105.5403.5750WSs-NS-75-10
46105.5403.5800WSs-NS-80-10
Standard arbor holes are: ø1” with an additional pin hole (1+1) or ø60 mm
with pins per machine.
Wall Saws Thin / Step Cutting
18. 18 TOOLGAL industrial diamond tools
Saws
Drills
Chain
Ring Saws
Ring Saws
Toolgal offers the following three high quality solutions for the 365 mm ring saw:
a standard solution for common applications; a soft version for special fast cutting;
and a hard version for abrasive materials. Toolgal also supplies ring saws with three
different segment thicknesses to enable step cutting.
The standard thickness is 4.3 mm and 5.5 mm thickness available.
Ring Saw
t
TLH
Ring Saw
DIMENSIONS
No. of
Segments
HeightThicknessLengthCoreDiameterItem code
225.54.3353365RS-365-4.3-5.5
225.55.5353365RS-365-5.5-5.5
19. 19TOOLGAL industrial diamond tools
Saws
Drills
Chain
Saws
Abrasive slurry and loose grits (such as aggregate underlay on roads or asphalt) will
circulate with the cutting motion and attack the steel core. This can wear the steel away
before the segment wears down. To break up the flow of this material, undercutting
protection segments are used to protect the steel core. This technique is generally reserved
for asphalt, sandstone, fresh concrete and some large diameter road saws applications.
Several configurations of undercutting segment are used by Toolgal:
V – Small diamond segment inserts brazed into
the slots of the core.
T – Extra height segment. Used on laser welded
blades. Full cutting power and full undercut
protection.
R – Trapezoid segment. Used on laser welded
blades. Similar in principle to T segments with refined
geometry.
C – a regular segment set on a slant. Used
mainly on regular concrete and asphalt saws.
Part of the slanted segment is dedicated for
undercutting protection.
U/C coding is compossed of one digit and a letter.
The digit represents the number of U/C segments on the saw blade.
The letter defines the u/c segment configuration (per above groups).
V = Hammer Segment
T = High Segment
R = Trapeziod
C = Inclined
Under Cutting Protection
Toolgal offers four different kinds of U/C protection configurations, as shown in the
table below.
Configuration C provides the fastest cutting solution, while the standard vertical
segment V configuration or the special R and T configurations enable the usage of
U/C protection segments with “full segment usage.”
Under Cutting Protection
20. Saws
Drills
Chain
20 TOOLGAL industrial diamond tools
Pre-Stressed Concrete Saws
Large saws are used in pre-stressed beam factories and railway beds.
Toolgal offers a wide variety of high performance saws that can be adapted to all
customer applications.
Toolgal possesses extensive expertise providing solutions for all kinds of
pre-stressed concrete production materials that comprise different wires, aggregates
and curing times. Toolgal provides a range of segment qualities and sizes according
to customer requirements, in addition to the following standard sizes.
ƒƒ High performance (speed and output) large blades for pre-stressed concrete
ƒƒ Suited for cutting all aggregate types and wires
ƒƒ Premium - for general use
ƒƒ High performance - for special high output requirement
To ensure that the right blade is used for the task at hand, the following information is
required:
Material
ƒƒ Aggregate quality (limestone, granite, quartz, etc.) and size
ƒƒ Curing time (in hours)
ƒƒ Tensioning wires and structure (thickness and number)
ƒƒ Drive power in kW and maximum limitations
Pre-Sterssed Concrete Saw
DIMENSIONS
No. of
Segments
HeightThicknessLengthDiameterItem code
4610640650PS-SS-65-10
5010640700PS-SS-70-10
54106.540800PS-SS-80-10
58106.540850PS-SS-85-10
64107.540900PS-SS-90-10
70108401000PS-SS-100-10
74108401100PS-SS-110-10
80108401200PS-SS-120-10
84109401300PS-SS-130-10
92109401400PS-SS-140-10
Pre–Stressed Concrete Saws
t
TLH
22. Saws
Drills
Chain
22 TOOLGAL industrial diamond tools
Ring Drills
Ring Core Drills
Toolgal offers a wide range of rings and segment configurations, sizes and qualities
to match customer requirements.
Ring Drills, small diameter drills up to 42 mm in diameter, are usually made from a
continuous ring rather than from segments.
Toolga’s ring drills for concrete have the following configurations:
a. The standard 6 mm to 8 mm high ring with a lathed base to enable the
positioning of the ring centrally during brazing and cut water slots to aid
cooling.
b. The 4T configuration of 7 mm high ring has a fast cutting action and improved
water cooling through its special geometry. These drills do not have the lathed
pad and are available in a limited variety of sizes.
* All rings drills have water cooling slots.
The rings are available as rings or mounted on tubes with a standard 1/2” BSP male
connection, which can be ordered in usable lengths of 150 to 400 mm.
Other dimentions by request.
ƒƒ Premium - for general use and light machines
ƒƒ High Performance - for long life and powerfull machines
24. Saws
Drills
Chain
24 TOOLGAL industrial diamond tools
24 TOOLGAL industrial diamond tools
Ring Drills
B
L
A
øD
B
L
A
øD
B
L
A
øD
Concrete Segmented Drills
For drills larger than 45 mm in diameter, Toolgal offers segmented core drills.
The segments have three different optional configurations: Flat, V-Shaped and Turbo
Shaped, as shown below.
Segments are mostly brazed with or without notches on the core, as per customer
requirements.
Toolgal’s three main qualities include:
Standard, Fast and Long Life in heights of 7.5, 10 and 15 mm.
Standard sizes are listed in the table below.
ƒƒ Fast drilling of all types of concrete
ƒƒ Very fast initial drill penetration
ƒƒ Variety of segment shapes
ƒƒ Premium - for general use and light machines
ƒƒ High Performance - for long life and powerfull machines
Concrete Segmented Drills
SegmentsCore
No. of
Segments
HeightThicknessLengthThicknessDiameterItem code
5103.524252WD-52-450
5103.524257WD-57-450
6103.524262WD-62-450
6103.524267WD-67-450
7103.524275WD-75-450
7103.524282WD-82-450
8103.524287WD-87-450
810424292WD-92-450
8104242102WD-102-450
9104242112WD-112-450
10104242117WD-117-450
11104242127WD-127-450
12104242132WD-132-450
13104242152WD-152-450
14104242162WD-162-450
14104242177WD-177-450
16104.5242.5187WD-187-450
16104.5242.5202WD-202-450
17104.5242.5212WD-212-450
18104.5242.5227WD-227-450
20105243252WD-252-450
22105243277WD-277-450
24105243302WD-302-450
All item codes refer to a usage length of 450 mm with a 1 1
⁄4” connector.
Other connectors types, diameters, lengths and number of segments are
available on request.
ƒƒ Drill with flat segment
ƒƒ Drill with V segment
ƒƒ Drill with T segment
26. Drills
Saws
Chain
26 TOOLGAL industrial diamond tools
SawShark Chain Series
The Chain Series
TOOLGAL SAWSHARK Chain is made of
engineered diamond for absolute best performance
in a variety of cutting applications.
ƒƒ Longer life.
ƒƒ More torque can be placed on chain and bar due to less spacing.
ƒƒ Gives greater life - up to 30% more surface area.
ƒƒ Chain stretching is reduced because of pressure on each segment is lower.
ƒƒ Cuts significantly faster when cutting through heavy reinforced concrete. More diamonds in
contact with the material.
Smoother Cutting & Less Vibration to the operator
ƒƒ Unique sandwich segment design maintains segment profile throughout chain life
ƒƒ The sandwich design has harder outer shell that keeps the segment’s profile throughout its
life. The use of a soft bond in the center enables fast cutting, especially in heavy steel.
ƒƒ Allowed the segment work all the way.
ƒƒ Only top quality diamonds are used in the bond which increases speed and life. Special
Grinding
OPEN SEGMENTS- Toolgal chain is surface ground during the production, so the operator can
start cutting immediately our of the box. (In competitor’s chain it can take more than 20 minutes to
open the segment, even in abrasive material).
Chain Structure
ƒƒ The basic concept is using a hardened internal bushing between the links and the drive link.
ƒƒ The link is very stable and slows down the elongation of the chain. The special hardening
process prevents excessive guide bar wear.
ƒƒ The assembly and disassembly is very easy using Toolgal chain assembly kit. An operator
can easily remove a broken link and replace it within minutes.
ƒƒ A special hole on the bottom of the drive link enable better cooling when water supply is
reduced.
27. Drills
Saws
Chain
Chainsaws
27TOOLGAL industrial diamond tools
TOOLGAL DIAMOND CHAIN
Chain Segments per Machine
Hydraulic Saws
MachineSegmentsChain Size
823 / 853 / 8805611” / 22 cm
CC 20/206212” / 30 cm
Mini SawShark / MiniSaw / LCC30 / DS06 / 813 / 8145013” / 33 cm
Mini SawShark / MiniSaw / LCC30 / DS065515” / 38 cm
LCC31 / DS116415” / 38 cm
853 / 823 / 8806615” / 38 cm
SawShark SS15 / C1507815” / 38 cm
CC 20/207416” / 40 cm
LCC31 / DS117418” / 45 cm
853 / 823 / 8807819” / 48 cm
CC 20/208620” / 50 cm
SawShark SS15 / C1508820” / 50 cm
853 / 823 / 8809424” / 60 cm
CC 20/209824” / 60 cm
SawShark SS15 / C150 / 853 / 823 / 88011030” / 75 cm
Gas Saws
MachineSegmentsChain Size
RZ60 / 603489” / 22 cm
RZ60 / 6035010” / 25 cm
RZ60 / 6035412” / 30 cm
613 / 680 / 6335812” / 30 cm
K950 / K960 / 613 / 680 / 6336414” / 35 cm
6337016” / 40 cm
Diamond Chain
28. Drills
Saws
Chain Chainsaws
28 TOOLGAL industrial diamond tools
Bulk Concept
Bulk Concept
‘Cut to Size’ Concept
The “Cut to Size” idea gives the customer the option to create his own chain, per needs, by using
the Toolgal assembly kit. Creating such a new chain will take a couple of minutes only and reduce
the chains stock.
With the BULK chain and assembly kit you can
create a chain for a variety of job applications.
ƒƒ Always guaranteed to have the right size in stock.
ƒƒ Reduces the need for a large inventory.
ƒƒ Can be assembled on site.
ƒƒ Quick & easy to assemble.
THE BULK: 25’ - 425 LINKS
BLUE SHARK – For the most demanding applications.
Very hard aggregate. Heavy reinforced steel.
TIGER SHARK – Classic abrasive chain.
Excellent speed and life in all abrasive material.
29. Drills
Saws
Chain Chainsaws
Chainsaws
29TOOLGAL industrial diamond tools
Chain Assembly Kit
Chain Assembly Kit - Operating
Instructions
Important: Fasten the kit (with proper bolts) to a sturdy table before use.
Operating the kit:
1. Remove the clamp assembly from the kit.
2. Insert the proper punch: riveting or extracting.
3. For extracting, remove the anvil (the toothed part) from the clamp assembly.
4. When riveting, the rivet is placed with its head resting on the anvil (on the
underside of the chain).
5. Place the chain in the clamp, so that the suitable pin is inserted into the hole
in the drive link. The chain’s location is according to the particular rivet being
treated.
6. Close the clamping jaw with the middle (larger) screw to straighten the chain
and hold it in place; close with moderate force only.
7. Put the clamp assembly, with the chain, in its place in the kit.
8. When riveting, lubricate the rivet with a drop of oil for better results.
9. Lower the punch down to the rivet with the handlebar (twin levers). Apply
pressure to the rivet with a 1/4 turn of the handlebar. Then turn the center
handle one or two turns. Repeat the former actions until the riveting is
completed. Attention: take care not to apply excessive pressure.
10. Release the chain when the riveting is completed; make sure that the drive link
turns freely around the rivet.
30. Drills
Saws
Chain Chainsaws
30 TOOLGAL industrial diamond tools
SawShark - 15
SawShark - 15
SawShark Cutter - SawShark 15™
Choice of two diamond chains:
1. Blue Shark – Chain for cutting hard / very hard aggregate with heavy steel reinforcment
2. Tiger Shark – Chain for cutting green concrete, brick and concrete block without steel
reinforcing
Part NumberSize
BAR
CA64101715” / 38 cm
CA64101920” / 50 cm
CA64102130” / 75 cm
CHAIN
Blue Shark - ACT11076
Tiger Shark - ACR00076
15” (38 cm) with 76
segments
Blue Shark - ACT11088
Tiger Shark - ACR00088
20” (50 cm) with 88
segments
Blue Shark - ACT11011
Tiger Shark - ACR00110
30” (75 cm) with 110
segments
SPROCKET
SHRN18-00
31. Drills
Saws
Chain Chainsaws
Chainsaws
31TOOLGAL industrial diamond tools
SawShark MINI
SawShark MINI
The MINI Chainsaw is DCI’s newest addition to the finest line of hydraulic concrete cutting saws.
Available with 13” or 15” cutting depths and manufactured with an aluminum frame.
The MINI Saw can be powered by a DCI HydraPak or by any other compatible power source.
Features & Benefits
ƒƒ Makes clean plunge, bottom, notch, trim, and corner cuts without overcutting.
ƒƒ Equipped with a powerful hydraulic motor (requires 8 gpm @ 2000 - 2250 psi).
ƒƒ The trigger lockout safety feature is standard.
ƒƒ Dual function trigger starts and stops tool and water simultaneously. Water flow system
delivers maximum lubrication, cooling, and abrasive flushing through eight internal bar
channels.
ƒƒ Lightweight aluminum frame is ergonomically designed to enhance cutting precision while
reducing operator fatigue.
ƒƒ 13” bar provides a full 13” cutting depth.
ƒƒ 15” bar provides a full 15” cutting depth.
ƒƒ Choose from two types of diamond chains:
BLUE SHARK – For the most demanding applications.
Very hard aggregate. Heavy reinforced steel.
TIGER SHARK – Classic abrasive chain. Excellent speed
and life in all abrasive material.
Part NumberSize
BAR
CA64102013” / 33 cm
CA64101215” / 38 cm
CHAIN
Blue Shark - ACT11050
Tiger Shark - ACR00050
13” (33 cm) with 50
segments
Blue Shark - ACT11055
Tiger Shark - ACR00055
15” (38 cm) with 55
segments
SPROCKET
SHSN07-00
32. Drills
Saws
Chain Chainsaws
32 TOOLGAL industrial diamond tools
Hydraulic Saws
823-853 / 813-814 Hydraulic Saws
823 - 853 Large frame hydraulic saw
Part NumberSize
BAR
CA64100711” / 28 cm
CA64100915” / 38 cm
CA64101019” / 48 cm
CA64101124” / 60 cm
CA64101330” / 75 cm
CHAIN
Blue Shark - ACT11056
Tiger Shark - ACR00056
11” (28 cm) with 56
segments
Blue Shark - AC000110
Tiger Shark - ACR00066
15” (38 cm) with 66
segments
Blue Shark - ACT 11078
Tiger Shark - ACR00078
19” (48 cm) with 78
segments
Blue Shark - ACT11094
Tiger Shark - ACR00094
24” (60 cm) with 94
segments
Blue Shark - ACT11011
Tiger Shark - ACR00110
30” (75 cm) with 110
segments
SPROCKET
SHIN14-00
SHARK LOCK - Conversion
STID14-00853 No motor
upgrade
STID16-01853 motor
upgrade & F4
813 - 814 Small frame hydraulic saw
Part NumberSize
BAR
CA64100813” / 33 cm
CHAIN
Blue Shark - ACT11050
Tiger Shark - ACR00050
13” (33 cm) with 50
Segments
SPROCKET
SHIN13-00
DO YOU KNOW HOW EASY IT IS TO CONVERT BACK?
Just take our sprocket and guide Bar.
If you have 853 w/Motor Upgrade or 880F4 you need STID16-01 Shark Lock
If you have 853 No Motor Upgrade you need: STID14-00 Shark Lock
33. Drills
Saws
Chain Chainsaws
Chainsaws
33TOOLGAL industrial diamond tools
Hydraulic Chain
Hydraulic chain
LCC30 / DS06
Part NumberSize
BAR
CA64102013” / 33 cm
CA64101215” / 38 cm
CHAIN
Blue Shark - ACT11050
Tiger Shark - ACR00050
13” (33 cm) with 50
segments
Blue Shark - ACT10055
Tiger Shark - ACR00055
15” (38 cm) with 55
segments
SPROCKET
SHSN07-00
LCC31 / DS11
Part NumberSize
BAR
BHSN156415” / 38 cm
BHSN187418” / 45 cm
CHAIN
Blue Shark - ACT11064
Tiger Shark - ACR00064
15” (38 cm) with 64
segments
Blue Shark - AC5H0074
Tiger Shark - ACR00074
18” (45 cm) with 74
segments
SPROCKET
SHSN14-00
CC20 / CSH 40
Part NumberSize
BAR
BHDN208620” / 50 cm
CHAIN
Blue Shark - ACT11062
Tiger Shark - ACR00062
12” (30 cm) with 62
segments
Blue Shark - ACT11074
Tiger Shark - ACR00074
16” (40 cm) with 74
segments
Blue Shark - ACT11086
Tiger Shark - ACR00086
20” (50 cm) with 86
segments
Blue Shark - ACT11098
Tiger Shark - ACR00098
24” (60 cm) with 98
segments
SPROCKET
SHDN14-00
34. Drills
Saws
Chain Chainsaws
34 TOOLGAL industrial diamond tools
Guide Bars - Tips
Guide Bars - Tips
Bar Tips
ƒƒ A Guide Bar is a wearable part of the diamond chain process, Guide Bars should wear at a
rate of 2-3 chains per bar. Harder materials can reduce the life.
ƒƒ There are things you can do to help extend the life of a Guide Bar.
ƒƒ Make sure the water pressure is good – Reduces overheati ng.
ƒƒ Correct tensioning of the chain will prevent the Bar Nose from opening or splitting.
ƒƒ The Bar Nose should not be continuously used for p lunge cuts.
ƒƒ If you are experiencing excessive wear – Try applying less pressure (Let the chain do the
work).
ƒƒ Do Not Use a longer Guide Bar than necessary, if you are cutting up to 15” use 15” bar.
Do not use a 24” bar for 12” of cutting.
ƒƒ When you fit a new chain be sure to rotate the Bar (Turn it Upside down). The guide Bar
works both ways and this helps to spread the wear on both sides of the bar.
ƒƒ Never run a new chain on a damaged Guide Bar, not only is it dangerous but it will cause
excessive wear to the chain.
Segment
Neutral
Pad
Drive
Link
Link
Rivet
Rivet
Bushing
25/64”x7/32”x1/4”
0.1”
Normal Diamond
Segment Wear
New Chain
35. Drills
Saws
Chain Chainsaws
Chainsaws
35TOOLGAL industrial diamond tools
Gas Chain Comparision Chart
Gas Chain Comparision Chart
Gas Chain Saw Comparison
Gas Saw Advantages
ƒƒ Up to 49% Improvement in Cutting Speed*
ƒƒ Up to 51% Improvement in Life of Chain*
ƒƒ Up to 55% Reduction in Vibration Levels*
Compared to Competitor
Estimated Chain Life
The estimate range of chain life for each chain is highlighted in red
Material Selection Chart
Gas machines
in-ft
m
2
9" (RZ) 48
10" 50
12" 58
14" 64
16" 70
600 700 800
1.6 2.3 3.1 3.9 4.7 5.4 6.2
500Bar
length
Chain Length
(links)
200 300 400Bar
Length
(inch)
9” (RZ)
10”
12”
14”
16”
Bar
Length
(CM)
23 cm(RZ)
25 cm
30 cm
35 cm
40 cm
100% 100% 100% 100%
45%
151%
364%
149%
Reinforced
Concrete
Rebar Only Overall Life Vibration Level
%Performance
Cutting Speed
400%
350%
300%
250%
200%
150%
100%
50%
`0%
Toolgal - Blue Shark
Competitor
, water pressure and capacity, aggregate, steel reinforcement, concrete age (green or cured),++ Best Soft
Abrasive/
Brick
Natural
stone
Medium
Concrete / Light
Reinforcement
Hard Concrete
/ Heavy
Reinforcement
+ + + +Blue shark + +
Tiger shark + +
+ Suitable
Gas machines
in-ft
m
2
9" (RZ) 48
10" 50
12" 58
14" 64
16" 70
600 700 800
1.6 2.3 3.1 3.9 4.7 5.4 6.2
500Bar
length
Chain Length
(links)
200 300 400Bar
Length
(inch)
9” (RZ)
10”
12”
14”
16”
Bar
Length
(CM)
23 cm(RZ)
25 cm
30 cm
35 cm
40 cm
100% 100% 100% 100%
45%
151%
364%
149%
Reinforced
Concrete
Rebar Only Overall Life Vibration Level
%Performance
Cutting Speed
400%
350%
300%
250%
200%
150%
100%
50%
`0%
Toolgal - Blue Shark
Competitor
, water pressure and capacity, aggregate, steel reinforcement, concrete age (green or cured),++ Best Soft
Abrasive/
Brick
Natural
stone
Medium
Concrete / Light
Reinforcement
Hard Concrete
/ Heavy
Reinforcement
+ + + +Blue shark + +
Tiger shark + +
+ Suitable
Gas machines
in-ft
m
2
9" (RZ) 48
10" 50
12" 58
14" 64
16" 70
600 700 800
1.6 2.3 3.1 3.9 4.7 5.4 6.2
500Bar
length
Chain Length
(links)
200 300 400Bar
Length
(inch)
9” (RZ)
10”
12”
14”
16”
Bar
Length
(CM)
23 cm(RZ)
25 cm
30 cm
35 cm
40 cm
100% 100% 100% 100%
45%
151%
364%
149%
Reinforced
Concrete
Rebar Only Overall Life Vibration Level
%Performance
Cutting Speed
400%
350%
300%
250%
200%
150%
100%
50%
`0%
Toolgal - Blue Shark
Competitor
, water pressure and capacity, aggregate, steel reinforcement, concrete age (green or cured),++ Best Soft
Abrasive/
Brick
Natural
stone
Medium
Concrete / Light
Reinforcement
Hard Concrete
/ Heavy
Reinforcement
+ + + +Blue shark + +
Tiger shark + +
+ Suitable
36. Chainsaws
36 TOOLGAL industrial diamond tools
Drills
Saws
Chain Gas Chain Machines
Gas Chain Machines
603GC - 64CC
Part NumberSize
BAR
CA6420129” / 22 cm
BGZN105010” / 25 cm
CA64201312” / 30 cm
CHAIN
Blue Shark - ACT11048
Tiger Shark - ACRG0048
9” (22 cm) with 48
segments
Blue Shark - ACT11050
Tiger Shark - ACRG0050
10” (25 cm) with 50
segments
Blue Shark - ACT11054
Tiger Shark - ACRG0054
12” (30 cm) with 54
segments
SPROCKET
SGIN08-00
613GC / 680 - 80CC
Part NumberSize
BAR
CA64200512” / 30 cm
CA64200614” / 35 cm
CHAIN
Blue Shark - ACT11058
Tiger Shark - ACRG0058
12” (30 cm) with 58
segments
Blue Shark - ACT11064
Tiger Shark - ACRG0064
14” (35 cm) with 64
segments
SPROCKET
SGIN08-00
37. Chainsaws
Chainsaws
37TOOLGAL industrial diamond tools
Drills
Saws
Chain Gas Chain Machines
Gas Chain Machines
633GC - 101CC
Part NumberSize
BAR
CA64201412” / 30 cm
CA64200614” / 35 cm
CA64200716” / 40 cm
CHAIN
Blue Shark - ACT11058
Tiger Shark - ACRG0058
12” (30 cm) with 58
segments
Blue Shark - ACT11064
Tiger Shark - ACRG0064
14” (35 cm) with 64
segments
Blue Shark - ACT11070
Tiger Shark - ACRG0070
16” (40 cm) with 70
segments
SPROCKET
SGIN08-00
K950 - K960
Part NumberSize
BAR
CA64201412” / 30 cm
CA64200614” / 35 cm
CHAIN
Blue Shark - ACT11058
Tiger Shark - ACRG0058
12” (30 cm) with 58
segments
Blue Shark - ACT11064
Tiger Shark - ACRG0064
14” (35 cm) with 64
segments
SPROCKET
SGIN09-00
38. Drills
Saws
Chain Chainsaws
38 TOOLGAL industrial diamond tools
Cutting Depth & Applications
Cutting Depth & Applications
Cutting Depth
Diamond Chain vs. Blades
Chart Shows Bar Size required to cut same depth as a Diamond Blade
Applications
LANDSCAPE CONSTRUCTION
ƒƒ Miter, angle and arc cuts
ƒƒ Natural stone - water features and fountains
ƒƒ Notch stones to create water channels
ƒƒ Create clean, tight fitting stone and rock walls
ƒƒ Hardscapes and faux rocks
ƒƒ Labor savings on dry stack walls and features
MASONRY CONSTRUCTION
ƒƒ Windows
ƒƒ Door openings
ƒƒ Expansion joints
ƒƒ Masonry repair
ƒƒ Crawl space access
ƒƒ Beam pockets
ƒƒ Remodel brick walls
GENERAL CONSTRUCTION
ƒƒ Foundations
ƒƒ Concrete pipe
ƒƒ Electrical box openings
ƒƒ Ventilation openings
ƒƒ Expansion joints
ƒƒ Vents
ƒƒ Curb cut-outs
UTILITY CONSTRUCTION
ƒƒ Pipe taps
ƒƒ Trim manholes to grade
ƒƒ Utility Vaults
ƒƒ Small openings
ƒƒ Concrete removal
DCI
DCI
12”
14”
36”
30”
26”
24”
20”
18”
16”
14” 633GC
13” SawShark MINI
13” 613GC
DCI
DCI
Wall Saw 36”
Bar 15”
Saw 36”
230-250 lbs.
DCI
DCI
Wall Saw 24”
Bar 13”
Saw 24”
230-250 lbs.
39. 39TOOLGAL industrial diamond tools
GENERAL TERMS OF SALES
The following terms and conditions shall apply to all sales completed by Toolgal
Degania Industrial Tools Limited.
No variation of these terms and conditions shall be binding on the company unless
authorized in writing.
Price
Price offers are valid for 90 days. Price lists are subject to occasional variation by prior
notification to the purchaser.
Export prices relate to minimum order weights or 50Kg.
Export prices are generally quoted CIF air freight local Airport. Purchasers may request
delivery by other means in which case the difference will be borne by the purchaser.
Publication
All information contained in any of Toolgal›s publications is given in good faith but
without warranty or condition and no liability is accepted for any damage or loss
arising from the same.
Delivery Dates
Toolgal will endeavor to deliver all orders to port by the date specified on the order
acknowledgment issued by the export department. No liability is accepted for loss
due to failure to deliver or a delay in delivery howsoever arising.
Quotations
All quotations are subject to modification or withdrawal and no binding contract shall
be deemed as existing until Toolgal accepts a firm order by way of acknowledgment.
Returns
All returns must be done with prior written agreement of Toolgal and executed
according to Toolgal›s instructions. All goods sent without such agreement may be
returned to sender at his/her cost.
Warranty
Toolgal warrants that goods are free from defects in material and workmanship.
Toolgal will replace or credit any such items as reported providing written notice is
received within 3 months of delivery. Toolgal has the right to ask for such goods, a
sample thereof to be sent for examination prior to compensation, as described.
Safety
Purchasers are responsible for the dissemination of appropriate safety standards to
end users and compliance with local national regulations. Purchasers should maintain
a product liability policy where necessary, especially where segments are brazed by
purchaser.
Governing Law
All contracts shall be governed and construed according to the laws of the state of
Israel and any dispute arising out of or in connection with the same shall be submitted
to the exclusive jurisdiction of the Israeli courts.
Terms
40. 40 TOOLGAL industrial diamond tools
This right applies to the designation of the registered tools as well as their
packaging or labelling.
Executive Board
Organization for the Safety of Abrasives (oSa®
) - Oxfordstraße 8 - D-53111 Bonn - Germany
Membership Cer tificate
The Organization for the Safety of Abrasives (oSa®
)
herewith grants to the company
based on the Application Form, oSa®
-Constitution and Conditions of Use for the oSa®
Trademark the right until withdrawn to use the oSa®
mark in the described colours
for the abrasives notified.
Bonn, 15 December 2010
TOOlgAl DegAniA
inDuSTriAl DiAmOnDS limiTeD
as of 15 December 2010
OSA Certification
OSA