This document outlines plans for opening events at multiple Planet Bar de Luxe locations over the summer season. It identifies attracting new and loyal customers, presenting the clubs as the hottest spots, and gaining media coverage as objectives. Threats include competing clubs hosting prominent artists on the same day and a low budget. The proposed solution is to offer innovative, unprecedented entertainment through singers, dancers, DJs and decorations to make customers feel privileged. One event featured international MMA fighters, entertainment and became a reported sporting event. Another successful event sold 2000 tickets and fully booked an MMA fight on a yacht that gained significant media coverage.
This document outlines plans for opening events at multiple Planet Bar de Luxe locations over the summer season. It identifies attracting new and loyal customers, presenting the clubs as the hottest spots, and gaining media coverage as objectives. Threats include competing clubs hosting prominent artists on the same day and a low budget. The proposed solution is to offer innovative, unprecedented entertainment through singers, dancers, DJs and decorations to make customers feel privileged. One event featured international MMA fighters, entertainment and became a reported sporting event. Another successful event sold 2000 tickets and fully booked an MMA fight on a yacht that gained significant media coverage.
This document contains a review of pelvis and perineum structures and functions including:
1. A multiple choice question regarding structures at risk of injury during adrenal gland removal.
2. The layer enclosing the adrenal gland when not removed with the kidney during nephrectomy.
3. Expected effects on a boy who develops without FSH release due to anterior pituitary injury.
4. The enzyme deficiency suspected in a newborn with ambiguous genitalia and enlarged adrenals.
5. The typical days of ovulation within a 28-30 day menstrual cycle.
On August 26, 2014, SOCAP Florida hosted a Luncheon on "Customer Service Gamification" at the NAP of the Americas in Downtown Miami.
Our gracious and thought provoking keynote speaker was Kelly McQuiston, Director Commercial Products at Kelly Services.
In the presentation, Kelly dives into what is Customer Service Gamification, how it is defined, and why we should gamify the agent experience for customer service professionals.
TRUNG TÂM ĐÀO TẠO BIM XÂY DỰNG
Phòng G01 - H1, Hẻm 1034, đường Nguyễn Ái Quốc, Tổ 13, KP1, P. Trảng Dài TP.Biên Hòa, Tỉnh Đồng Nai
Email: bimxaydung@gmail.com
Website: http://bimxaydung.com
FB: https://www.facebook.com/bimxaydung
Đồ án chi tiết máy: Tính toán và thiết kế hộp giảm tốc răng trụ răng nghiêng. Mục đích giới thiệu về hộp giảm tốc bánh răng nghiêng, tính toán bộ truyền xích, cách tính toán và chọn động cơ, tính momen, chọn trục, biết được kết cấu trục, giúp sinh viên lộ trình rõ ràng cho các bạn sinh viên tham khảo và hoàn thành thật tốt đồ án môn học thật tốt. Chúc các bạn thành công!
Mình sẽ thường xuyên cập nhât, các bạn tham khảo tại trang kythuatcokhidm.org . Thân ái!
Chuyên cung cấp dịch vụ và giải pháp VOIP, đầu số hotline 1800 và 1900 cho doanh nghiệp
TIME TRUE LIFE TECHNOLOGY JOINT STOCK COMPANY
Mr Long
Mobi: 0986883886 - 0905710588
Email: long.npb@ttlcorp.vn
Website: ttlcorp.vn
The document describes the SINAMICS V20 drive, which offers a cost-effective and easy-to-use drive solution for basic automation applications with power requirements up to 30 kW. Key features include compact design, quick commissioning through parameter cloning and connection macros, integrated energy monitoring, robust performance in variable voltage conditions, and cost savings through optimized control for low overload applications. The V20 works with SIMATIC controllers and offers application examples for pumping, conveying, processing, and solar power systems.
This document provides an overview of a 10-unit lecture course on English for Mechanical Engineering. It includes summaries of Units 1-3. Unit 1 introduces the main branches of engineering and discusses what engineering involves. It provides tasks for students to complete related to engineering fields and materials. Unit 2 focuses on engineering materials, including a table comparing properties and uses of various metals and plastics. Unit 3 will cover mechanisms but its content is not shown. The document is formatted as a textbook with learning objectives, tasks and exercises for students.
This document provides information about mechanisms and engineering materials. It contains 10 units that cover topics such as engineering branches, materials properties, mechanisms, forces, electric motors, safety, washing machines, corrosion, CAD, and applying for jobs. The first unit defines the main branches of engineering like civil, mechanical, electrical, and electronic engineering. It also discusses the different types of engineers involved in areas like transport, building services, food processing, and energy. The second unit presents a table of common engineering materials including their properties and uses. It discusses metals, thermoplastics, and thermosetting plastics. The third unit introduces basic mechanisms and the different types of motion they produce. It explains how mechanisms allow everyday functions and industrial processes.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
This short document promotes creating Haiku Deck presentations on SlideShare and getting started making one. It encourages the reader to be inspired to make their own presentation using Haiku Deck on the SlideShare platform. A call to action is given to get started creating a Haiku Deck presentation.
1. N- Tính tæ soá truyeàn i ñeå ñieàu chænh baùnh raêng thay theá.
II.2. Ví duï veà ñieàu chænh maùy töï ñoäng:
II.1 Ñieàu chænh maùy töï ñoäng nhoùm 1:
Ñieàu chænh maùy tieän töï ñoäng ñònh hình doïc:
* Noäi dung coâng vieäc ñieàu chænh:
1) Laäp baûn veõ
2) Chuaån bò maùy, duïng cuï caét, phoâi, ñoà gaù
3) Sô ñoà boá trí baøn dao
4)Laäp sô ñoà gia coâng
5) Xaùc ñònh cheá ñoä caét
6) Xaùc ñònh caùc thoâng soá coâng ngheä
7) Laäp phieáu ñieàu chænh
8) Laäp chu trình laøm vieäc
9) Thieát keá cam
Noäi Dung
1) Laäp baûn veõ:
Ñaëc ñieåm cuûa maùy töï ñoäng ñònh hình doïc
- Chæ gia coâng nhöõng chi tieát nhoû, ñôn giaûn vaø ít nguyeân
coâng …
(Hình Chi tieát gia coâng)
2) Chuaån bò maùy, duïng cuï caét, phoâi, ñoà gaù:
- Döïa vaøo hình daùng cuûa chi tieát, xaùc ñònh choïn nhoùm maùy,
chi tieát ñôn giaûn, deå gia coâng.
- Choïn maùy 1π12
1: Maùy tieän
π: Theá heä maùy
249
2. 12: Ñöôøng kính lôùn nhaát (Dmax), maùy coù theå gia coâng ñöôïc (φ
12).
3) Sô ñoà boá trí baøn dao:
Treân maùy coù boä ñoà gaù phay raõnh vít, laøm vieäc truøng vôùi
caùc nguyeân coâng khaùc
Maùy coù 3 baøn dao ñöùng vaø hai baøn dao ngang (goïi laø baøn
dao ñoøn caân)
* Caùc böôùc ñieàu chænh maùy:
Laäp sô ñoà gia coâng:
Thöù töï choïn dao
Dao (1 vaït goùc , dao (2) tieän truï ngoaøi , dao (3) caét ñöùt
Ngoaøi ra coøn coù baøn dao caét ren ñaët ñoái dieän truïc chính vaø dao
phay raõnh vít laép treân ñoà gaù chuyeân duøng:
3
2
1
5
4
4)Laäp sô ñoà gia coâng:
Baûng thöù töï caùc nguyeân coâng:
Soá
nguyeân
coâng
Sô ñoà nguyeân coâng Teân nguyeân coâng
250
H. X.6. Sô ñoà boá trí baøn dao treân maùy
1π12
3. 1
2
3
Vaït goùc: 3 x 45
o
Tieän ngoaøi: Þ5,96 x 32
Caét ren vaø caét ñöùt: M6 x
1
5) Xaùc ñònh cheá ñoä caét:
Döïa vaøo thuyeát minh cuûa maùy,vaät lieäu vaø baûn veõ,hoaëc
giaùo trình (saùch cheá ñoä caét khi gia coâng cô…).
Choïn löôïng chaïy dao doïc Sd = 0.04 mm/ v
Löôïng chaïy dao ñeå caét ñöùt Sn = 0.02 mm/ v
Vaän toác caét khi tieän trôn: V = 65 (meùt/
phuùt)
Vaän toác caét ren: Vr = 7 (meùt /
phuùt)
Treân cô sôû caùc soá lieäu ñaõ coù ta tính soá voøng quay cuûa caùc
böôùc nguyeân coâng:
Soá voøng quay phoâi:
2073
10.
65.1000
==
πftn (v/f)
Ta choïn soá voøng quay gaàn nhaát vôùi soá voøng quay coù treân
maùy:
n f = 2070 (v/f)
251
4. Soá voøng quay khi caét ren: 372
6.
7.1000
==
πftn (m/f)
Caét ren baèng phöông phaùp caét ñuoåi baøn ren
Soá voøng quay truïc duïng cuï khi caét ren: ndr
Ndr = nft + nor = 2070 + 372 = 2442 (v/f)
Soá voøng quay khi luøi: n
’
dr = 0, (truïc duïng cuï khoâng quay)
6) Xaùc ñònh caùc thoâng soá coâng ngheä:
a) Xaùc ñònh chieàu daøi haønh trình:
Goàâm 16 böôùc nguyeân coâng:.
böôùc1-3:keïp phoâi, boä phaän keïp coù saún treân maùy neân
khoâng caàn tính toaùn.
böôùc 2: choïn dao caét, daøy 2 mm
Chieàu daøi uï phoâi luøi: L2 = 40 + 2 = 42 mm
Ta laáy tæ soá truyeàn töø cam ñeán uï phoâi: h2 = i.L2 = 42 mm
Haønh trình böôùc 4: caét ñöùt (vaït maët ñaàu)
∆1 = 0.5, dao ngoaøi phoâi
∆2 = 0.15,dao vöôït qua ñöôøng taâm phoâi, L4=0.5+5+0.15+2tg10
o
= 6
(mm)
Dao caét ñöùt ñöôïc ñaët treân baøn dao 3 cuûa giaù dao, coù i3 = 3
Ñoä naâng cam laø: h = I.L4 = 3.6 = 18 (mm)
Böôùc 5:
252
H. X.7. Sô ñoà böôùc caét ñöùt
5. - Haønh trình vaït goùc 3x45
o
L5 = 15 (mm), tæ soá truyeàn töø cam tôùi baøn dao, i = 3
Böôùc 6: Haønh trình vaït goùc.
L6 = 3.2 (mm)
Ñoä naâng: h6 = 3,2 x3 = 9,6 (mm)
Böôùc 7: dao lui veà vò trí cuõ:
L7 =L5 + L 6 = 1.5+3.2 = 4.7 (mm)
H7 = 3 x 4.7 = 14.1 (mm)
Böôùc 8: Haønh trình chaïy khoâng,(dao tieán töø ngoaøi vaøo)
L 8 = 0.5 + 2 = 2.5 (mm), vôùi I = 3
Goùc naâng cam: H8 = 3 x 2.5 = 7.5 (mm)
253
H. X.8. Sô ñoà böôùc vaït caïnh
H. X.9. Sô ñoà böôùc tieän
ngoaøi
6. Böôùc 9: tieän truï ngoaøi Þ5,96.
Dao caùch chi tieát: ∆ = 0.2
Dao chuyeån ñoäng suoát ñoä daøi haønh trình:
L = 32 - 1 + 0.2 = 31.2 (mm), i = 1, h9 = i.L9 = 31.2(mm)
Böôùc 10: dao tieän ngoaøi luøi:
L10 = L8 = 2.5 (mm)
H10 = h8 = 7.5 (mm), haønh trình luøi dao gioáng nhau.
Böôùc 11: dao caét naèm leäch vôùi dao tieän 1 khoaûng 0.8 (mm)
- UÏ phoâi tieán nhanh,
haønh trình chaïy khoâng
L11 = 0.8+ 8 + 2 = 10.8 (mm), i = 1, h = 10.8 (mm)
Böôùc 12,13,14: böôùc caét ren vaø luøi (haønh trình laøm vieäc):
L12 = L13 = 20 + 1 = 21 (mm)
- Cô caáu keïp phoâi vaøo cuøng moät luùc vôùi haønh trình caét ren
naøy.
Böôùc 15:
Dao caét ñöùt ñi vaøo (haønh trình chaïy khoâng)
L 15 = 0.3 mm, i = 3
H15 = 3 x 0.3 =0.9
(i: tæ soá truyeàn töø truïc phaân phoái ñeán baøn dao)
254
H. X.10. Böôùc uï phoâi tieán
nhanh
7. Böôùc 16: haønh trình caét ñöùt chi tieát: L 16 = 0.2 + 5+ 0.15 +2tg10
= 5.7 (mm)
Vì:i = 3, h16 = 3 x 5.7
b) Xaùc ñònh soá löôïng voøng quay vaø thôøi gian chính:
Soá löôïng voøng quay caàn thieát cuûa truïc mang phoâi, cho
caùc böôùc nguyeân coâng:
Kí hieäu: Ki = Li / Si,
Ñoái vôùi haønh trình caét ren: Zi = Li / Ti.
Khi vaït goùc K6 = 80 voøng
Tieän ngoaøi K9 = 780 voøng
Caét ñöùt K16 = 285 voøng
Khi caét ren Z =21 voøng
Khi luøi baøn ren L13 =21 voøng
Heä soá qui daãn khi caét ren laø:
6.5
372
2070
====
or
ft
ti
to
r
n
n
n
n
C
Soá löôïng voøng quay caàn thieát khi caét ren: K12 = Z. Cr = 21 x
5.6 =118 (voøng)
+ Böôùc caét ren truøng vôùi böôùc caét ñöùt phoâi neân thôøi gian
gia coâng tính cho moãi böôùc naøy:
Vaäy thôøi gian chính: s
n
KKK
n
k
T
ftto
i
5.3360.
2070
1145
60.
60 1669
==
++
==
∑
Thôøi gian sô boä gia coâng chi tieát:
T = 4.6 + 1.07T1 = 4.6 + 1,07 x 33.5 = 40 s
Naêng suaát cuûa maùy laø: Q = 60 /T = 60 /40 = 1,5 (chi tieát /
1phuùt)
c) Xaùc ñònh söï phoái hôïp giöõa caùc nguyeân coâng:
- xaùc ñònh goùc quay β caùc haønh trình chaïy khoâng cuûa
truïc phaân phoái:
β: phuï thuoäc vaøo naêng suaát cuûa maùy (Q)
Neáu coâng suaát Q cuûa maùy coù Q = 0 ÷ 8 (chi tieát / phuùt)
Thì: Khi cam naâng 1 mm: β = 1.2
o
255
8. Khi cam haï 1 mm: β = 0.5
o
Neáu coâng suaát Q cuûa maùy coù Q = 8÷ 15 (chi tieát / phuùt)
Thì: Khi cam naâng 1 mm: β = 1.5
o
Khi cam haï 1 mm: β = 1
o
Treân cô sôû naøy ta xaùc ñònh goùc β cho töøng böôùc nguyeân coâng:
Böôù
c
Nguyeân Coâng Soá Lieäu
1 vaø
3
Khi môû oáng keïp β1 = 10
o
Khi sieát oáng keïp β = 15
o
2
Uï phoâi luøi, cam laøm vieäc treân
ñöôøng cong haï xuoáng, cam haï
moät ñoaïn
h = 42mm,
Goùc quay:
β2 = 0,5
o
.H2 = 0.5x42= 21
o
4 Dao caét ñöùt luøi khi cam haï β4 = 0.5
o
. H4 = 0.5 x 18 = 9
o
5
Dao vaït goùc khi cam naâng,
böôùc naøy truøng vôùi böôùc 4
β5 = 0.5
o
x h5= 0.5 x4,5= 5.4
O
H5 = 4,5 mm
7 Dao vaït goùc luøi khi cam haï β6 = 0.5
o
x h6 = 0.5 x 14,1 = 7
O
8
Dao tieän ngoaøi vaøo khi cam haï,
böôùc naøy truøng vôùi böôùc 7
β7 = 0.5
o
x h7 = 0.5 x 7,5 = 4
O
10
Dao tieän ngoaøi luøi khi cam
naâng
β10 = 1,2
o
x h10 = 1.2 x 7,5 = 9
O
11 Uï phoâi tieán nhanh khi cam naâng β11 = 1,2
o
x h11= 1.2 x 10.8 = 13
O
15
Dao caét ñöùt vaøo khi cam naâng
β15 = 1,2
o
x h15 = 1.2 x 0.9 = 1.08
O
- Ñeå deå thieát keá vaø gia
coâng ta choïn β15 = 3
o
Goùc quay cuûa haønh trình phuï vaø chaïy khoâng cuûa truïc phaân
phoái:
Σβ = 10 +21+15+9+7+9+13+3 = 87
o
Toång goùc quay truïc phaân phoái cho haønh trình laøm vieäc:
Σα = 360
o
- Σβ = 360
o
- 87
o
= 273
o
256
15. - Tæ leä: 1:2
Cam naøy ñieàu khieån dao vaït goùc:
Ta laáy; rmax = 60 mm, r = 125 mm, a = 135 mm, h2 = 14.1
Rmin = 45,9 mm
töø 0
o
÷46
o
; cam chaïy khoâng
46
o
÷52
o
; cam naâng ñöa dao gaït vaøo
52
o
÷55
o
; cam
chaïy khoâng
55
o
÷74
o
; cam laøm vieäc
74
o
÷81
o
; cam haï ñeå luøi dao
81
o
÷360
o
; cam chaïy khoâng
Cam naâng haï ñeàu laø nhöõng ñoaïn thaúng, cam chaïy khoâng laø
nhöõng cung troøn, ñeå cam ít moøn ta haï baùn kính cam, hoaëc thay
baèng ñöôøng cong arsimet.
Ñeã deå laép cam vaøo truïc phaân phoái, ta xeû raõnh cho cam baøn
dao ñöùng.
263
H. X.13.Hình veõ: cam baøn dao ñöùng