CHT was established in 1987 as a specialized agency of the petroleum industry to assess future technology requirements and develop indigenous capabilities for the oil sector. Its vision is to attain technological competence and self-reliance in the hydrocarbon sector, and its mission includes advising the ministry of petroleum on technology programs, assessing refinery performance, and promoting information sharing. CHT functions under the guidance of a governing council and conducts activities like refinery reviews, research projects, and technical support to the ministry.
Debottlenecking Claus Sulfur Recovery Units: An Investigation of the applicat...Gerard B. Hawkins
Debottlenecking Claus Sulfur Recovery Units: An Investigation of the application of Zinc Titanates
1 Executive Summary
2 Claus Process
2.1 Partial Combustion Claus
2.2 Split Flow Claus
2.3 Sulfur Recycle Claus
3 Zinc Titanates
4 Application of Zinc Titanate to Debottleneck Partial Combustion Claus by 10%
4.1 Process
4.2 ASPEN Modeling Results
4.3 Cost of Zinc Titanate Bed Installation
4.3.1 Basis of Costing
4.3.2 Zinc Titanate Beds
4.3.3 Regen Cooler
4.3.4 Blowers
4.3.5 Results
4.4 Alternative Debottlenecking Technology for Partial Combustion Claus
4.5 Cost of 10% Debottlenecking Using COPE Process
5 Debottlenecking Claus Split Flow System by 10% with Zinc Titanates
6 Debottlenecking Claus Sulfur Recycle System With Zinc Titanate
7 Effect of Zinc Titanate Debottlenecking on Existing Tail; Gas Treatment Systems
7.1 Selectox
7.2 SuperClaus99
7.3 Superclaus 99.5
7.4 SCOT Process
7.5 Zinc Titanate as a Claus Tail Gas Treatment
7.6 H2S Removal Efficiency With Zinc Titanate
8 Effects on COS and CS2 Formation
9 Questions for further Investigation
FIGURES
Figure 1 Claus Unit and TGCU
Figure 2 Claus Process
Figure 3 Typical Claus Sulfur Recovery Unit
Figure 4 Two-Stage Claus SRU
Figure 5 The Super Claus Process
Figure 6 SCOT
Figure 7 SCOT/BSR-MDEA (or clone) TGCU
REFERENCES: PATENTS
US4333855_PROMOTED_ZINC_TITANATE_CATALYTIC_AGENT
US4394297_ZINC_TITANATE_CATALYST
US6338794B1_DESULFURIZATION_ZINC_TITANATE_SORBENTS
Determination of Aniline Point of Petroleum SamplesIRJESJOURNAL
ABSTRACT:– Aniline point is the minimum temperature for a complete mixing of aniline and materials such as gasoline; used in some specifications to indicate the aromatic content of oils and to calculate approximate heat of combustion
Debottlenecking Claus Sulfur Recovery Units: An Investigation of the applicat...Gerard B. Hawkins
Debottlenecking Claus Sulfur Recovery Units: An Investigation of the application of Zinc Titanates
1 Executive Summary
2 Claus Process
2.1 Partial Combustion Claus
2.2 Split Flow Claus
2.3 Sulfur Recycle Claus
3 Zinc Titanates
4 Application of Zinc Titanate to Debottleneck Partial Combustion Claus by 10%
4.1 Process
4.2 ASPEN Modeling Results
4.3 Cost of Zinc Titanate Bed Installation
4.3.1 Basis of Costing
4.3.2 Zinc Titanate Beds
4.3.3 Regen Cooler
4.3.4 Blowers
4.3.5 Results
4.4 Alternative Debottlenecking Technology for Partial Combustion Claus
4.5 Cost of 10% Debottlenecking Using COPE Process
5 Debottlenecking Claus Split Flow System by 10% with Zinc Titanates
6 Debottlenecking Claus Sulfur Recycle System With Zinc Titanate
7 Effect of Zinc Titanate Debottlenecking on Existing Tail; Gas Treatment Systems
7.1 Selectox
7.2 SuperClaus99
7.3 Superclaus 99.5
7.4 SCOT Process
7.5 Zinc Titanate as a Claus Tail Gas Treatment
7.6 H2S Removal Efficiency With Zinc Titanate
8 Effects on COS and CS2 Formation
9 Questions for further Investigation
FIGURES
Figure 1 Claus Unit and TGCU
Figure 2 Claus Process
Figure 3 Typical Claus Sulfur Recovery Unit
Figure 4 Two-Stage Claus SRU
Figure 5 The Super Claus Process
Figure 6 SCOT
Figure 7 SCOT/BSR-MDEA (or clone) TGCU
REFERENCES: PATENTS
US4333855_PROMOTED_ZINC_TITANATE_CATALYTIC_AGENT
US4394297_ZINC_TITANATE_CATALYST
US6338794B1_DESULFURIZATION_ZINC_TITANATE_SORBENTS
Determination of Aniline Point of Petroleum SamplesIRJESJOURNAL
ABSTRACT:– Aniline point is the minimum temperature for a complete mixing of aniline and materials such as gasoline; used in some specifications to indicate the aromatic content of oils and to calculate approximate heat of combustion
A detailed explanation for one of the most substantial tools in the wire-line formation testers family including the history of wire-line formation testers family, the main functions of the tool , the difference between RFT and DST , the operation of the tool , the pressure profiles , log presentation , log interpretation , corrections with other tools and permeability calculations from pressure measured by the RFT tool.
Reserve Estimation of Initial Oil and Gas by using Volumetric Method in Mann ...ijtsrd
This research paper is focused to estimate the current production rate of the wells and to predict field remaining reserves. The remaining reserve depends on the production points that selected to represent the real well behavior, the way of dealing with the production data, and the human errors that might happen during the life of the field. Reserves estimating methods are usually categorized into three families analogy, volumetric, and performance techniques. Reserve Estimators should utilize the particular methods, and the number of methods, which in their professional judgment are most appropriate given i the geographic location, formation characteristics and nature of the property or group of properties with respect to which reserves are being estimated ii the amount and quality of available data and iii the significance of such property or group of properties in relation to the oil and gas properties with respect to which reserves are being estimated. In this research paper, the calculation of collecting data and sample by volumetric method are suggested to estimate the oil and gas production rate with time by using the geological configuration and the historical production data from CD 3700 3800 sand in Mann Oil Field. San Win "Reserve Estimation of Initial Oil and Gas by using Volumetric Method in Mann Oil Field" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27945.pdfPaper URL: https://www.ijtsrd.com/engineering/petroleum-engineering/27945/reserve-estimation-of-initial-oil-and-gas-by-using-volumetric-method-in-mann-oil-field/san-win
Sustainable Approach Of Recycling Palm Oil Mill Effluent Using Integrated Bio...SAJJAD KHUDHUR ABBAS
Bio-film bacteria (Biological Treatment) integrated with Membrane Technology is based on WHAT FACTORS ?
ANS:
COST EFFECTIVE
REQUIREMENTS
FLEXIBILITY
SIMPLICITY
CLOSED OR OPEN SYSTEM
N0TE: UPON our knowledge and research, There is no previous work had or have done on using integrated biofilm-Membrane.
Unconventional petroleum resource potentiality in the bengal basinShahadat Saimon
Unconventional petroleum resource is rather a new term in the world of hydrocarbon where petroleum is extracted from the source rock itself without expecting any trap, reservoir and migration pathways. As of Bangladesh’s perspective, we have only been successful in exploiting structural traps (saying anticlinal traps would be more perfect). In this growing industrialization, exploring unconventional resources or new petroleum plays is a must to meet with the current demand, as Bangladesh is likely to run out of indigenous fuel by 2030s.
In this project we basically studied scope of this project, its feasibility and market assessment, raw material availability, different routes to produce Syngas and their comparison, process selection and its complete description, its P&ID, and environmental consideration.
Cairn has been exploring for hydrocarbons in India for more than 15 years. Today, it has a proven track record of making exploration discoveries and fast tracking them to production. Three out of the seven landmark oil discoveries made in India between 2000 and 2005 were by Cairn and its Joint Venture (JV) partners. The Mangala discovery in Rajasthan in 2004 was the largest onshore discovery in the country in the past two decades.
The Mangala Field commenced production on 29 August 2009 after it was dedicated to the nation by the Honourable Prime Minister of India, Dr. Manmohan Singh at the Mangala Processing Terminal in Barmer, Rajasthan.
For more info log onto www.cairnindia.com
A detailed explanation for one of the most substantial tools in the wire-line formation testers family including the history of wire-line formation testers family, the main functions of the tool , the difference between RFT and DST , the operation of the tool , the pressure profiles , log presentation , log interpretation , corrections with other tools and permeability calculations from pressure measured by the RFT tool.
Reserve Estimation of Initial Oil and Gas by using Volumetric Method in Mann ...ijtsrd
This research paper is focused to estimate the current production rate of the wells and to predict field remaining reserves. The remaining reserve depends on the production points that selected to represent the real well behavior, the way of dealing with the production data, and the human errors that might happen during the life of the field. Reserves estimating methods are usually categorized into three families analogy, volumetric, and performance techniques. Reserve Estimators should utilize the particular methods, and the number of methods, which in their professional judgment are most appropriate given i the geographic location, formation characteristics and nature of the property or group of properties with respect to which reserves are being estimated ii the amount and quality of available data and iii the significance of such property or group of properties in relation to the oil and gas properties with respect to which reserves are being estimated. In this research paper, the calculation of collecting data and sample by volumetric method are suggested to estimate the oil and gas production rate with time by using the geological configuration and the historical production data from CD 3700 3800 sand in Mann Oil Field. San Win "Reserve Estimation of Initial Oil and Gas by using Volumetric Method in Mann Oil Field" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27945.pdfPaper URL: https://www.ijtsrd.com/engineering/petroleum-engineering/27945/reserve-estimation-of-initial-oil-and-gas-by-using-volumetric-method-in-mann-oil-field/san-win
Sustainable Approach Of Recycling Palm Oil Mill Effluent Using Integrated Bio...SAJJAD KHUDHUR ABBAS
Bio-film bacteria (Biological Treatment) integrated with Membrane Technology is based on WHAT FACTORS ?
ANS:
COST EFFECTIVE
REQUIREMENTS
FLEXIBILITY
SIMPLICITY
CLOSED OR OPEN SYSTEM
N0TE: UPON our knowledge and research, There is no previous work had or have done on using integrated biofilm-Membrane.
Unconventional petroleum resource potentiality in the bengal basinShahadat Saimon
Unconventional petroleum resource is rather a new term in the world of hydrocarbon where petroleum is extracted from the source rock itself without expecting any trap, reservoir and migration pathways. As of Bangladesh’s perspective, we have only been successful in exploiting structural traps (saying anticlinal traps would be more perfect). In this growing industrialization, exploring unconventional resources or new petroleum plays is a must to meet with the current demand, as Bangladesh is likely to run out of indigenous fuel by 2030s.
In this project we basically studied scope of this project, its feasibility and market assessment, raw material availability, different routes to produce Syngas and their comparison, process selection and its complete description, its P&ID, and environmental consideration.
Cairn has been exploring for hydrocarbons in India for more than 15 years. Today, it has a proven track record of making exploration discoveries and fast tracking them to production. Three out of the seven landmark oil discoveries made in India between 2000 and 2005 were by Cairn and its Joint Venture (JV) partners. The Mangala discovery in Rajasthan in 2004 was the largest onshore discovery in the country in the past two decades.
The Mangala Field commenced production on 29 August 2009 after it was dedicated to the nation by the Honourable Prime Minister of India, Dr. Manmohan Singh at the Mangala Processing Terminal in Barmer, Rajasthan.
For more info log onto www.cairnindia.com
Gasification Technologies for Fuel, Power, and Chemical ProductsWalter Lee
This course provides a fundamental grounding in gasification technology. It communicates sufficient theoretical background to understand why different processes behave the way they do. It also reviews the properties of coals and other feedstock for their suitability for gasification.
Optimizing Gas Turbines and Life ManagementWalter Lee
A practical and comprehensive course on condition & life
assessments for gas turbines with the aim of improving gas
turbine operational & maintenance practices, minimizing
the likelihood of failures, prolonging asset life & reducing
maintenance costs.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
2. OUTLINE
• Introduction
• Vision
• Mission
• Formation
• Functioning
• Member organization
• Activities of CHT
• R & D projects
• References
3. INTRODUCTION
• CHT was established in 1987 as a specialized agency of petroleum
industry to assess futuristic requirements, acquire, develop and adopt
technologies in the field of refinery processes, petroleum products,
additives, storage and handling of crude oil products and gases.
• It is an advisory body to implement scientific and technological
programs for the oil sector.
• It acts as a forum for sharing technical information amongst the
refineries.
• The institute is also carrying out Integrated Refinery Business
Improvement Programme (IRBIP), a special study through Shell GSI
in four refineries.
4. VISION
• Development of indigenous capabilities to attain
technological competence and self-reliance in the
Hydrocarbon Sector.
5. MISSION
• Assess futuristic technology requirement for acquisition,
development and up-gradation.
• Function as the executive wing of Ministry of Petroleum & Natural
Gas to advise and implement the scientific technological
programmes for the oil Industry.
• Assess the operational performance of the refineries and develop
programmes in consultation with the industry for improvement.
• Project proposal evaluation and appraisal.
• Promote dissemination of information and develop a centralized
pool of data & information in specific fields for use by the oil
industry.
• Participation in various Expert Committees.
6. FORMATION
The Government Technology Policy Statement and Declaration aiming at
development of our own capabilities to attain technological competence and
self reliance in strategic and critical areas needed the following for achieving
excellence and progress in petroleum refining:
• Create an environment for technological improvement and to identify areas
/ missions where technological improvements is needed.
• Establish Scientific Advisory Committees for interaction and firm linkages
with R&D and Academic Institutions.
• Draw action plans for technology up-gradation through collaborative
projects.
7. • Project proposal evaluation and appraisal
• Simplify procedures for according various clearances / approvals for
mission status projects
• Create Advance Technology Cells
Priority for pursuing the above decisions and objectives
necessitated creation of a dedicated technology cell - Centre for High
Technology by Ministry of Petroleum & Natural GAS on 27th May 1987.
8. FUNCTIONING
• CHT functions under the overall guidance and supervision of the
Governing Council.
• The Governing Council is headed by the Secretary, Government of
India, Ministry of Petroleum & Natural Gas (MoP&NG) as the
Chairman and all Joint Secretaries and Advisers in the MoP&NG
and Chief Executives of IOCL, BPCL, HPCL, CPCL, NRL,
MRPL, GAIL, EIL, IIP, OIDB as members.
• The Executive Director of CHT is the Member Secretary of the
Governing Council.
• The expenditure of CHT is funded through grants from OIDB.
9. MEMBER ORGANISATION
• Bharat Petroleum Corporation Limited
• Chennai Petroleum Corporation Limited
• Engineers India Limited
• GAIL ( India) Limited
• Hindustan Petroleum Corporation Limited
• Indian Institute of Petroleum
• Indian Oil Corporation Limited
• Mangalore Refinery and Petrochemicals Limited
• Numaligarh Refinery Limited
• Oil Industry Development Board
• ESSAR Oil Limited
10. ACTIVITIES OF CHT
1. Review of Physical Performance of Refineries for QPR meeting
at MOP & NG.
Energy Performance.
Crude throughput & Capacity utilisation
Product Pattern
2. Integrated Refinery Business Improvement Program (IRBIP).
3. Development of energy factor for new process units and
Revalidation of factors for the existing units in refineries.
4. Participation in joint studies under the Asia-Pacific-Partnership
(APP6) on “ Carbon Capture & Storage and IGCC technology ” .
11. 5. Performance Audit of Refineries.
6. CHT Publications
Technology Scan
CHT Bulletin
7.Technical support to MOP & NG
Review of Applications for Foreign Technology collaboration
Comments for Issuance of Essentiality Certificates for various refinery
and pipeline projects .
8. Scientific Advisory Committee (SAC) on Hydrocarbons
12. R & D PROJECTS
• Centre for High Technology sponsors research projects in the field
of Petroleum Refining, Gas Processing, Transportation, storage and
handling of Crude Oil and Petroleum products.
• The proposals received from R&D and academic institutions after
review by Scientific Advisory Committee on Hydrocarbon of
Ministry of Petroleum & Natural Gas are recommended to
Advisory Committee of CHT. The proposals up to Rs 100 Lakhs
recommended by Advisory Committee are approved by Executive
Committee of CHT. The proposals above Rs 100 Lakhs are
approved by the Governing Council of CHT.
