CHECKLIST SALON Form # HSEQ - CS Rev 2.docx
•Download as DOCX, PDF•
0 likes•286 views
Accommodation Name: Location: Company Name: Date: Time : ITEMS TO BE CHECKED Yes No N/A Comments 1 Tools and towel cleaned and sterilized 2 Tools sterilizer available and is working properly 3 Disposable blades and tools not used before and to be discarded after use. 4 Worker in salon washes his hands before and after serving customers. 5 Use clean and sterilized hair brushes that are kept in clean and suitable drawers. 6 Non-metal nail care tools and face sponges must be disposable and packaged well. 7 Below areas are Cleaned and disinfected Sitting and servicing areas, floors, surfaces, corners, sauna and steam rooms, as well as cabinets, shelves, drawers, curtains and toilets. 8 First aid box with valid contents ready for use 9 Cosmetics label written in Arabic and English and includes source, contents, methods of storing and usage and stored according to producer instructions 10 Is the water sinks are clean. 11 Is Covered waste bin provided for waste collection? 12 Is facial machines maintained clean and disinfected. 13 Is No smoking strictly Observed? Avoid practicing the following in beauty salons: Pimples and acne removal, skin scraping tattoo, ear piercing. Observation Remarks: Inspected By: Signature: Reviewed By HSE Manager / In charge : Signature:
Report
Share
Report
Share
Recommended
PORTABLE TOOLS CHECKLIST Form # HSEQ - PTC Rev 2 -.docx
Project Information
Project Name:
Location:
Company Name: Date :
Sl. No Description Yes No N/A Comments
General
1. Power cables present no hazard or obstruction. Connections are appropriate, earthed and provided with fuse.
2. User competent and authorized
3. Guard is fitted, adjusted and tool in good condition.
4. Emergency stop is available and operational.
5. Manufacturer instructions available and followed.
Pneumatic Tools
6. All hoses, couplings and fittings of correct rating.
7. Hoses, couplings and fittings inspected and maintained regularly.
8. Whip arrestor are placed to hoses.
9. Air supply lines protected from damage, maintained and inspected regularly.
10. Safety devices are provided for air hose with large diameter.
11. Manufacturer instruction is available and followed.
Manual un powered Tools
12. Tools checked and inspected before use
13. Right tool for the right job, no improvised tool
14. Others specify
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
SECURITY CHECKLIST Form # HSEQ - SC Rev 2 -.docx
Project Information
Project Name:
Location: Company Name:
Date: Time :
ITEMS TO BE CHECKED Yes No N/A Comments
1. Hoarding encloses all construction activities.
2. No unauthorised entry to the project
3. Hoarding secure and not damaged.
4. Hoarding not less than 2 meters high.
5. Hoarding inspected both inside and outside.
6. Hoarding support posts securely anchored.
7. Materials/rubble/litter along hoarding.
8. Surveillance of gates maintained while the area open.
9. Warning signs fixed to hoarding
10. Adequate lighting at gates/at boundary
11. Control movement of material in and out of the project
12. Safe access & good visibility for plant & vehicles entering and leaving site.
13. Pedestrians segregated from vehicle access ways
14. Reversing vehicles accompanied by banksmen
15. Condition of vehicle and pedestrian routes maintained
16. Warning signs posted e.g. maximum speed limit, traffic direction, pedestrian routes etc.
17. Bus drop off and pick up areas no risk to pedestrians
18. Housekeeping
19. No sleeping on the site except for rest area
20. Safe Stacking & Storage
21. Night shift: Lighting adequate
22. Security equipment: torches, radios etc. in place
23. Security hand over book completed, no deviations recorded in the Book
24. Others ( Specify)
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
LIFE LINE INSPECTION RECORD Form # HSEQ - LLIR Rev 2.docx
Project Information
Project Name: Level/ Floor:
Location: Grid line:
Company name : Date:
Life line check point Line No. Line No. Line No. Line No:
Life line to be installed by competent erector and inspected prior use
Wire rope free from damage / broken wires
Minimum 12 mm diameter wire rope with breaking strength of 89 kN
Wire rope not corroded/ rusted
No kinks available
No reduction in diameter
No birdcage available
Both vertical pipes at ends provided at diagonal bracing
Platform secured with ladders
3 bull dog clips provided at end joints and properly clamped
No joints available in life line
No deformity on formwork scaffold
Safe Distance between two life lines is maintained.
Away from electrical lines
Valid third party certificate available for installed lifeline
Others ( Specify)
Remarks:
This checklist to be completed for both Shift
Inspector Name: Signature:
Reviewed By HSE Manager / In charge Signature:
27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docx
27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docxDwarika Bhushan Sharma
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Hydrostatic pressure testing of pipework inside buildings Relevant Applicable MAS:
• Additional Training required:
NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
L C RR
1 Pressure testing equipment • Use at high pressure; • Rupture/failure of pump during testing;
• Valve/connection failure;
• Instrument failure resulting in system over-pressurization;
3 3 9 MED i. The supervisor in charge of the test shall ensure that all pressure testing gauges etc. are in good sound condition, undamaged, correctly dated with the current valid calibration and that appropriate calibration certificates are available;
ii. All pumps shall be in sound condition and complete with a valid test certificate. Any vulnerable items such as manometers and pressure switches shall be removed or isolated from the system prior to testing if not required;
iii. The test supervisor shall carry out a thorough inspection of the system before requesting the permit detailed above to ensure that all isolations, blanks and other specified safety devices are in place before testing commences; No test documentation available Quarantine equipment until valid documentation provided Low
2 Permit to work system • Interaction of personnel and high pressure system; • Injury due to uncontrolled testing;
• Injury due to failure to ensure adequate pre-checks undertaken; 3 4 12 HIGH i. All pressure testing operations shall require a Permit to Work to ensure that no pressure testing will be allowed to commence until all,Electrical safety training based on osha 1910 standards sw
OSHA standards, Hazard Identification, PPE, Safety, Safe working practices, Electrical hazards and causes, Osha 1910.301, Employee responsibility, statistical quality and safety training
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
This document is a sub-contractor pre-start HSE checklist that must be filled out daily before starting any activity. It collects project information, task details including description, location, workers and duration. It also checks that various HSE prerequisites are in place such as safety inductions, risk assessments, PPE availability, inspection of tools and equipment, and that unsafe conditions have been rectified. The sub-contractor must acknowledge that all precautions and control measures have been taken and the workers have been deemed competent to perform the task safely.
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Control Measures: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement & Risk assessment developed, approved & communicated? ☐ ☐ ☐
Availability of rescue procedure and equipment? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Workplace appropriately illuminated ☐ ☐ ☐
Any high risk activity associated that requires PTW (i.e. hot work, CSE)? ☐ ☐ ☐
Forced ventilation provided? ☐ ☐ ☐
Are all necessary Permit approved and displayed at work location? ☐ ☐ ☐
Means of communication available? (Mobile, radio etc.) ☐ ☐ ☐
Safe access / Working Platform provided? ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
Availability of barricades/protection to prevent unauthorized or accidental entry? ☐ ☐ ☐
Life Line provided? ☐ ☐ ☐
Warning signs posted? ☐ ☐ ☐
Fall Protection equipment (e.g. full body harness) available? ☐ ☐ ☐
Availability of Fall protection arrangement? ☐ ☐ ☐
Other(s): ☐ ☐ ☐
Adequate Lighting provided? ☐ ☐ ☐
☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
27 hydrostatic pressure testing inside buildings risk assessment templates
Establishing exclusion zones • Personnel in area • Unauthorized access to test area;
• Workers struck by flying materials;
• Worker struck by High pressure water release;
Signage to test area • Personnel in area • Unauthorized access to test area;
• Inadequate signage to test area;
Pressure testing • High pressure to pipework; • Uncontrolled Stored Energy release;
• Rupture/failure in Pipe lines during testing;
• Valve/connection failure;
• Instrument failure resulting in system over-pressurization;
• End caps/plugs ejecting under high pressure;
• Weld/seal/fitting failure, flying objects;
• High pressure water/air injection.
Emergency procedures • High pressure to pipework; • Emergency procedures not briefed to task workers;
• Poor response in the event of an emergency;
Re-testing in the event of failure • Re-testing with high pressure • Injury due to uncontrolled testing;
• Worker injury due to working on pressurized system;
• Injury due to failure to ensure adequate pre-checks undertaken;
Recommended
PORTABLE TOOLS CHECKLIST Form # HSEQ - PTC Rev 2 -.docx
Project Information
Project Name:
Location:
Company Name: Date :
Sl. No Description Yes No N/A Comments
General
1. Power cables present no hazard or obstruction. Connections are appropriate, earthed and provided with fuse.
2. User competent and authorized
3. Guard is fitted, adjusted and tool in good condition.
4. Emergency stop is available and operational.
5. Manufacturer instructions available and followed.
Pneumatic Tools
6. All hoses, couplings and fittings of correct rating.
7. Hoses, couplings and fittings inspected and maintained regularly.
8. Whip arrestor are placed to hoses.
9. Air supply lines protected from damage, maintained and inspected regularly.
10. Safety devices are provided for air hose with large diameter.
11. Manufacturer instruction is available and followed.
Manual un powered Tools
12. Tools checked and inspected before use
13. Right tool for the right job, no improvised tool
14. Others specify
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
SECURITY CHECKLIST Form # HSEQ - SC Rev 2 -.docx
Project Information
Project Name:
Location: Company Name:
Date: Time :
ITEMS TO BE CHECKED Yes No N/A Comments
1. Hoarding encloses all construction activities.
2. No unauthorised entry to the project
3. Hoarding secure and not damaged.
4. Hoarding not less than 2 meters high.
5. Hoarding inspected both inside and outside.
6. Hoarding support posts securely anchored.
7. Materials/rubble/litter along hoarding.
8. Surveillance of gates maintained while the area open.
9. Warning signs fixed to hoarding
10. Adequate lighting at gates/at boundary
11. Control movement of material in and out of the project
12. Safe access & good visibility for plant & vehicles entering and leaving site.
13. Pedestrians segregated from vehicle access ways
14. Reversing vehicles accompanied by banksmen
15. Condition of vehicle and pedestrian routes maintained
16. Warning signs posted e.g. maximum speed limit, traffic direction, pedestrian routes etc.
17. Bus drop off and pick up areas no risk to pedestrians
18. Housekeeping
19. No sleeping on the site except for rest area
20. Safe Stacking & Storage
21. Night shift: Lighting adequate
22. Security equipment: torches, radios etc. in place
23. Security hand over book completed, no deviations recorded in the Book
24. Others ( Specify)
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
LIFE LINE INSPECTION RECORD Form # HSEQ - LLIR Rev 2.docx
Project Information
Project Name: Level/ Floor:
Location: Grid line:
Company name : Date:
Life line check point Line No. Line No. Line No. Line No:
Life line to be installed by competent erector and inspected prior use
Wire rope free from damage / broken wires
Minimum 12 mm diameter wire rope with breaking strength of 89 kN
Wire rope not corroded/ rusted
No kinks available
No reduction in diameter
No birdcage available
Both vertical pipes at ends provided at diagonal bracing
Platform secured with ladders
3 bull dog clips provided at end joints and properly clamped
No joints available in life line
No deformity on formwork scaffold
Safe Distance between two life lines is maintained.
Away from electrical lines
Valid third party certificate available for installed lifeline
Others ( Specify)
Remarks:
This checklist to be completed for both Shift
Inspector Name: Signature:
Reviewed By HSE Manager / In charge Signature:
27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docx
27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docxDwarika Bhushan Sharma
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Hydrostatic pressure testing of pipework inside buildings Relevant Applicable MAS:
• Additional Training required:
NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
L C RR
1 Pressure testing equipment • Use at high pressure; • Rupture/failure of pump during testing;
• Valve/connection failure;
• Instrument failure resulting in system over-pressurization;
3 3 9 MED i. The supervisor in charge of the test shall ensure that all pressure testing gauges etc. are in good sound condition, undamaged, correctly dated with the current valid calibration and that appropriate calibration certificates are available;
ii. All pumps shall be in sound condition and complete with a valid test certificate. Any vulnerable items such as manometers and pressure switches shall be removed or isolated from the system prior to testing if not required;
iii. The test supervisor shall carry out a thorough inspection of the system before requesting the permit detailed above to ensure that all isolations, blanks and other specified safety devices are in place before testing commences; No test documentation available Quarantine equipment until valid documentation provided Low
2 Permit to work system • Interaction of personnel and high pressure system; • Injury due to uncontrolled testing;
• Injury due to failure to ensure adequate pre-checks undertaken; 3 4 12 HIGH i. All pressure testing operations shall require a Permit to Work to ensure that no pressure testing will be allowed to commence until all,Electrical safety training based on osha 1910 standards sw
OSHA standards, Hazard Identification, PPE, Safety, Safe working practices, Electrical hazards and causes, Osha 1910.301, Employee responsibility, statistical quality and safety training
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
This document is a sub-contractor pre-start HSE checklist that must be filled out daily before starting any activity. It collects project information, task details including description, location, workers and duration. It also checks that various HSE prerequisites are in place such as safety inductions, risk assessments, PPE availability, inspection of tools and equipment, and that unsafe conditions have been rectified. The sub-contractor must acknowledge that all precautions and control measures have been taken and the workers have been deemed competent to perform the task safely.
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Control Measures: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement & Risk assessment developed, approved & communicated? ☐ ☐ ☐
Availability of rescue procedure and equipment? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Workplace appropriately illuminated ☐ ☐ ☐
Any high risk activity associated that requires PTW (i.e. hot work, CSE)? ☐ ☐ ☐
Forced ventilation provided? ☐ ☐ ☐
Are all necessary Permit approved and displayed at work location? ☐ ☐ ☐
Means of communication available? (Mobile, radio etc.) ☐ ☐ ☐
Safe access / Working Platform provided? ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
Availability of barricades/protection to prevent unauthorized or accidental entry? ☐ ☐ ☐
Life Line provided? ☐ ☐ ☐
Warning signs posted? ☐ ☐ ☐
Fall Protection equipment (e.g. full body harness) available? ☐ ☐ ☐
Availability of Fall protection arrangement? ☐ ☐ ☐
Other(s): ☐ ☐ ☐
Adequate Lighting provided? ☐ ☐ ☐
☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
27 hydrostatic pressure testing inside buildings risk assessment templates
Establishing exclusion zones • Personnel in area • Unauthorized access to test area;
• Workers struck by flying materials;
• Worker struck by High pressure water release;
Signage to test area • Personnel in area • Unauthorized access to test area;
• Inadequate signage to test area;
Pressure testing • High pressure to pipework; • Uncontrolled Stored Energy release;
• Rupture/failure in Pipe lines during testing;
• Valve/connection failure;
• Instrument failure resulting in system over-pressurization;
• End caps/plugs ejecting under high pressure;
• Weld/seal/fitting failure, flying objects;
• High pressure water/air injection.
Emergency procedures • High pressure to pipework; • Emergency procedures not briefed to task workers;
• Poor response in the event of an emergency;
Re-testing in the event of failure • Re-testing with high pressure • Injury due to uncontrolled testing;
• Worker injury due to working on pressurized system;
• Injury due to failure to ensure adequate pre-checks undertaken;
Risk Assessment Example.pdf
This document provides a risk assessment for lifting operations using overhead cranes. It identifies several potential hazards including using uncertified or untrained crane operators, riggers, and lifting equipment. Control measures are outlined such as ensuring all operators and riggers are properly trained and certified, performing pre-use checks of cranes, not exceeding crane weight limits, and barricading lifting areas. Responsible parties for implementing controls and supervising work are also specified. The assessment was performed to reduce risks of injuries or property damage during crane lifting operations.
FIRE EXTINGUISHER INSPECTION Form # HSEQ - FEI Rev 4.docx
This document is a fire extinguisher inspection form to be completed twice weekly. It includes details of fire extinguishers such as their number, type, location, seal, lock, pin, pressure gauge, and discharge hose and nozzle. Inspectors check each fire extinguisher for cracks, breaks, seals and other defects, and note any required repairs or replacements in the remarks section. The inspection is reviewed and noted by safety and project management.
PRESSURE TESTING PERMIT Form # HSEQ - PTP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE TEST AND IS NOT EXTENDABLE
Description of Task:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
Design Pressure of Pipeline: Operating Pressure:
Testing Pressure: Pressure Time:
3. Pressure Testing Details: (To be filled by initiator/originator)
Type of Work Request ☐ Hydrostatic
☐ Pneumatic
☐ Gravity Testing
☐ Other :
Type of Equipment testing: ☐ Pipeline
☐ GRP ☐ AC ☐ others:
☐ Tanks
☐ Hose
☐ Other(s)
Dimensions: Pipeline/Tank/Hose
☐ Diameter:
☐ Thickness:
☐ Length:
☐ Other(s):
Attachment(s): ☐ Plan
☐ Sketch
☐ Drawing (approved)
☐ Method Statement & Risk Assessment
☐ Authority Approvals (NOCs)
☐ Road Traffic Approval (if applicable)
☐ Other(s)
4. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Is the segment of pipeline under testing isolated from service by closing nearest valves? ☐ ☐ ☐
Risk assessment/ method statement developed, approved and communicated? ☐ ☐ ☐
Is the Liquid/Gas vented/removed from the pipeline? ☐ ☐ ☐
Testing & monitoring of the environment prior to entry? ☐ ☐ ☐
Test Head and End plug/end point are properly sealed/secured/tighten. ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Is Air vented completely by pumping and filling the water in the testing segment pipeline without pressurizing? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Pressure testing equipment in good condition with available safe guards ☐ ☐ ☐
Provision of vigilance supervision? ☐ ☐ ☐
Flexible pipe/hose are in good condition and connections are safely clamped ☐ ☐ ☐
Proper barricade and signage are posted? ☐ ☐ ☐
Pressure testing gauge have valid calibration. ☐ ☐ ☐
Safe means of access/egress provided? ☐ ☐ ☐
Pressure testing gauge/ valve are in safe & accessible place outside restricted/isolated area ☐ ☐ ☐
Means of communication available? ☐ ☐ ☐
Is the testing pipeline/vessel/tank are properly isolated ☐ ☐ ☐
Electrical equipment & connections safe? ☐ ☐ ☐
Is confined space PTW required & obtained? ☐ ☐ ☐
Other(s) ☐ ☐ ☐
5. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
6. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
TOWER CRANE INSPECTION CHECKLIST Form # HSEQ - TCI Rev 2 -.docx
This document is a daily inspection checklist for tower cranes. It contains 21 items to check including the crane foundation, power system, ropes, lifts, lights, safety equipment, and operational controls. Any issues identified during inspection are noted in the comments section. The checklist is signed by both the crane operator and an HSE manager to confirm all inspections were completed for each shift. The purpose is to ensure the crane's safety through regular documented inspections.
STORE INSPECTION Form # HSEQ - Form 2 Rev 2.docx
Project Information
Project Name: Store No.
Location: Contact Person:
Company Name: Arabtec Construction LLC. Date:
Sr. Description Yes No N/A Comments
1. Is access to stores are restricted to authorized personnel only?
2. Are there clear spaces around racks and stacks of stored materials and are adequate gangways provided between them?
3. Are stacks and storage kept clear of light fittings and hot surfaces?
4. Are all stocks of flammable liquids kept in purpose-built flammable storage liquid stores?
5. Are storage areas generally cleaned and tidy?
6. Are flammable liquids kept away from all possible sources of ignition?
7. Emergency exit signs are available in right locations
8. Smoke detectors/fire alarm are visible and accessible.
9. Fire extinguishers are available are serviced regularly
10. Are free standing shelves and cupboards secured for stability?
11. Are heavy items stored at a suitable height?
12. Are chemical containers used for storage suitable and clearly labelled?
13. Is there adequate light in the storage area?
14. Are all small loose items secured in appropriate storage?
15. Are warning notices, prohibiting smoking and naked lights prominently displayed?
16. Others if any:
Remarks:
Inspected by: Signature:
Reviewed by Project Manager/HSE Manager Signature:
Electrical Hazards in the Workplace
This document discusses common electrical hazards in the workplace including arc flash. It outlines hazards such as electric shock, burns, and blast that can occur when working with energized electrical equipment. The document reviews regulations around ground-fault circuit interrupter protection, flexible cords, cabinets and boxes, lockout/tagout procedures, approach boundaries for live parts, and training requirements for qualified persons working on electrical equipment. Ensuring equipment is deenergized when possible, through lockout/tagout, is emphasized as the most effective way to eliminate electrical hazards.
Fire extinguisher monthly checklist report
This document is a fire extinguisher inspection record for contract number 098-C58 at the EPC of JIC Cooling Plant project site. It was inspected by Salman Khyder on May 2nd, 2015 and contains information on 34 fire extinguishers such as their type, condition, and inspection details. The inspection was reviewed by the safety officer.
17 Traffic Operations - Working on live roads Risk Assessment Templates.docx
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Scaffold for work access. Classed as Temporary Works Relevant Applicable MAS:
• Additional Training required:
Temporary Works Coordinator to be designated NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
P S RR
1 • Road works
• Road delineation
• Diversions
• Closures • Workers in proximity of live private vehicle routes • Worker conflict with live traffic routes;
• Worker injury due to insufficient traffic barriers or protection;
• Lane closures and diversions of high speed traffic;
• Traffic incident due to incorrect traffic management;
• Uncontrolled entry by public into work areas;
• Objects falling from site plant onto public roads;
• Night time works; 4 4 16
HIGH i. Adhere to requirements in Project Safety Plan;
ii. Traffic Safety Buffers and Worker Safety Buffers to be as Chapter 3 fig.3.3 from RTA Manual where practicable;
iii. Works undertaken adjacent to live traffic shall be clearly indicated including correct multi-language warning signs;
iv. All personnel shall be briefed on RTA standards;
v. For night time works signs and cones using flashing lights shall be used;
vi. Lane closures and diversions to be in line with RTA manual;
vii. Tail vehicle to be fitted with flashing directional arrows;
viii. Tail vehicle to allow for curves and hills in roads when situating;
ix. Tail vehicle shall be in contact with supervisor at all times by radio or mobile;
x. Ensure that where required a flagman is used to control site personnel and vehicles crossing traffic routes (o
Scaffolding checklist
This document is a scaffolding inspection checklist for a construction project to upgrade the Sungai Besi-Ulu Kelang highway to a multi-level highway. It lists various items that are checked to ensure the scaffolding was erected properly and safely, including checking that frames, braces, guardrails, and other scaffolding components were correctly positioned and fixed. The checklist also includes fields to record the inspection results, and spaces for the inspector, witness, and person acknowledging the inspection to sign off.
JSA For Work at Height.docx
This document provides a job safety analysis for work at height at the Ajyal international School Project in Dammam, Saudi Arabia. It identifies potential risks such as falling materials, unauthorized or untrained personnel, and improper scaffolding erection. Control measures include using only experienced workers, inspecting equipment, ensuring scaffolding is properly erected and braced, using fall protection when working over 1.8 meters, and complying with proper PPE. The analysis also covers risks from night work such as electric shock, improper illumination, and personal injury, and control measures like inspecting power cables, providing adequate lighting, and using required PPE. Housekeeping tasks also require barricading areas, using PPE, and controlling slip/trip hazards
JSA Aerial Lift (english) KWW
This Job Safety Analysis document provides safety guidance for operating an aerial lift. It outlines required personal protective equipment including a full body harness, safety glasses, steel-toed boots, and ear plugs. It describes pre-operation inspections of the lift and work area that must be completed each day. Proper procedures are listed for mounting and dismounting the lift basket, traveling with loads, and setting up at the work site. Fall protection is mandatory when working in an elevated basket.
Overhead crane risk assessment
Lifting operation, as a huge and complicated systems engineering, involves every aspects of enterprise production. This paper will briefly introduce some common problems and control procedures during operation for occupational safety and health .
AIR COMPRESSOR CHECKLIST Form # HSEQ - ACL Rev 2.docx
Project Information
Project Name: Serial No:
Location: Manufacture Name:
Company Name: Date :
3rd Party Inspection valid till:
Sr. Description Yes No N/A Comments
1. Are compressors equipped with pressure relief valves and pressure gauges?
2. Are signs posted to warn about hot surfaces of the exhaust?
3. Air compressor 3rd party certificate available?
4. Is whip check arrestor used in all coupling points?
5. Is the belt drive system totally enclosed to provide protection for the front, back, top, and sides?
6. Air hoses in good condition without cracks/ damages.
7. Control valves in good condition
8. Is there any oil leakage
9. Drip tray provided
10. Fire extinguisher provided
11. Any damage/Cut in tires/ tire pressure
12. Meter gauge working properly
13. Lifting Hooks damaged
14. Battery of air compressor charged
15. Visible damage
16. Exhaust directed/ close to combustibles/ flammables
17. Exhaust not directed inside any room. (Internal Combustion Air Compressors shall be kept outside in the well-ventilated area)
18. Others specify:
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / in charge : Signature:
WORK AT HEIGHT PERMIT Form # HSEQ - WHP Rev.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
Type :
Work at height without guardrails
Work at height on fragile surfaces
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator) Yes-No-NA
Method Statement and Risk Assessment developed, approved and communicated? ☐ ☐ ☐
Area barricaded & proper signage are posted? ☐ ☐ ☐
Qualified and briefed workers? ☐ ☐ ☐
PPE of workers available & inspected as per MS/RA? ☐ ☐ ☐
Tools/Equipment inspected? ☐ ☐ ☐
Safe means of access/ Egress? ☐ ☐ ☐
Lifeline available and inspected? ☐ ☐ ☐
Fragile surface covered / work surface protected? ☐ ☐ ☐
Dimensions of platform and restrain lanyard match safety requirement? ☐ ☐ ☐
Harness with double lanyard provided and its use briefed to workforce? ☐ ☐ ☐
Harness anchorage point checked? ☐ ☐ ☐
Load bearing capacity of anchoring point checked? ☐ ☐ ☐
Load bearing capacity of fragile service checked? ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Others ( Specify) ☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature : Time:
MEDICAL REPORT FORM Form # HSEQ - MRF Rev 3 -.docx
MEDICAL REPORT FORM
Day _____________
Date ____________
Time ____________
To: _________________________________________________________________________________________________________
Dear Sir,
We would kindly request you to give necessary treatment to our following employee who had met with an accident and provide us with your diagnosis.
Name of injured __________________________________________________________ Age ( ) years.
Occupation __________________________________________________________ M.B. No. _______________________________
Date of Accident ____________________________________________ Time of Accident __________________________________
Place of Accident (Project Name) _______________________________ Location _________________________________________
Nature of Accident ____________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
First Aider Name: ________________________________ SE Manager/Incharge: ________________________________
Signature: ________________________________ Signature: ________________________________
(If Medical Certificate is attached, this portion is not required.)
MEDICAL REPORT
Nature and extent of Accident / Injury____________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
Fit for duty___________________________________________________________________________________________________
Unfit for duty_________________________________________________________________________________________________
Remarks_____________________________________________________________________________________________________
____________________________________________________________________________________________________________
Signature of Medical Officer Date _______________
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Location / Area :
Panel No : Voltage:
Permit Validity:
Time (from): _______Hrs.
Time (To): __________Hrs.
Date:
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
No: Checks Yes-No-NA Checks Yes-No-NA
ENERGIZATION (“Power On”) ISOLATION (“Power Off”)
1. Safety tool box briefing done. ☐ ☐ ☐
Method statement/Risk assessment in place. ☐ ☐ ☐
2. Authorized personnel / operators available. ☐ ☐ ☐
Authorized personnel / operators available. ☐ ☐ ☐
3. Method statement/Risk assessment in place. ☐ ☐ ☐
Adjacent live areas protected. ☐ ☐ ☐
4. Safety Barriers in place and safety signage Displayed. ☐ ☐ ☐
PPE available, high voltage rubber gloves, Safety goggles and floor mat. ☐ ☐ ☐
5. Working area is well lighted. ☐ ☐ ☐
Isolation/Lock-out in place. ☐ ☐ ☐
6. Electrical instruments are available for any Purpose. ☐ ☐ ☐
Electrical circuits “proved” by calibrated Instrument and found out to be no power. ☐ ☐ ☐
7. Correct PPE available, high voltage rubber Gloves, safety goggles and floor mat. ☐ ☐ ☐
Unauthorized workers are cleared from the Area. ☐ ☐ ☐
8. Approved WIR for installation, testing and Termination are attached to the permit. ☐ ☐ ☐
Standby operatives in the event of contact With live circuits. ☐ ☐ ☐
9. Emergency light (Flashlight) available. ☐ ☐ ☐
Emergency light (Flashlight) available. ☐ ☐ ☐
10. Is live work absolutely necessary? ☐ ☐ ☐
Emergency response plan available ☐ ☐ ☐
11. Unauthorized workers are cleared from the area.
☐ ☐ ☐
Other ( Specify): ☒ ☐ ☐
12. Power cable route from panel board to plant & equipment has been checked ☐ ☐ ☐
13 Emergency response plan available ☐ ☐ ☐
14 Other ( Specify): ☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
Lifting plan template
This document provides a lifting plan, risk assessment, and method statement for lifting operations. It includes details of the load, cranes, lifting accessories, hazards identified, risk assessment, responsibilities of personnel, and acceptance signatures. The key details are the load weight and dimensions, crane models and capacities, identified hazards like overhead power lines, and the sequence of operations. Personnel roles like appointed person, slinger, and crane supervisor are defined. Weather limits and ground conditions are also addressed.
CONFINED SPACE ENTRY PERMIT Form # HSEQ - CSE Rev 3.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
(This permit is only for one shift and is not extendable)
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement and Risk assessment developed, approved and communicated? ☐ ☐ ☐
Provision of vigilance supervision? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Safe means of access/egress provided? ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Means of communication available? ☐ ☐ ☐
Proper signage are posted? ☐ ☐ ☐
Workplace appropriately illuminated? ☐ ☐ ☐
Electrical equipment & connections safe? ☐ ☐ ☐
Ventilation means are available & used before entry? ☐ ☐ ☐
Gases/ hazardous material Isolation is done (LOTO)? ☐ ☐ ☐
Will ventilation be continued during work? (LEV) ☐ ☐ ☐
Mechanical & electrical equipment isolation done (LOTO)? ☐ ☐ ☐
Harness/lifeline/ mechanical retrieval system (tripod) available? ☐ ☐ ☐
Will any other equipment be used/ running in the space? ☐ ☐ ☐
SCBA is maintained & available? ☐ ☐ ☐
Will any chemical be used in the space? ☐ ☐ ☐
Trained stand-by man available? ☐ ☐ ☐
Was the space been found unacceptable? ☐ ☐ ☐
Others( Specify) ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
☐ ☐ ☐
4. Trained Authorized Individuals: (To be filled by initiator/originator)
Entry Supervisor:
Stand-by Man:
First Aider(s)
Rescuer: 1. 2.
Authorized Entrants: 1. 2.
3. 4.
Equipment/ Materials details to be used
Details of Chemicals to be used (MSDS attached)
5. Atmospheric Conditions: (To be tested by authorized tester)
Authorized Tester(s):
Time O2 LEL H2S CO Heat (C) Other
Pre-entry 1. O2 – 19.5% to 23.5%
2. LEL – less than 10%
3. H2S – below 10 ppm
4. CO – PEL-below 35 ppm
Pre-entry after Vent
During Work
Others
Others
6. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any) :
7. Authorization (PM/CM):
Name: Designation:
Signature: Time:
8. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I
19 use of mobile elevated work platforms risk assessment templates
19 Use of Mobile Elevated Work Platforms Risk Assessment Templates
MEWP checks on arrival to site
PRIOR TO SITE ACCESS • Use of Access plant • Unauthorized operation of the plant resulting in incident;
• Failure due to use of un-certificated plant;
MEWP operation
(Operator) • Operator competency;
• Plant / pedestrian interaction;
• Work at Height; • Incident due to use of defective plant or associated equipment;
• MEWP overturning;
• Plant reversing – risk of serious injury to pedestrians;
• Unauthorized use of MEWP by untrained personnel;
• Operators climbing onto hand rails;
• Collision with other plant and live traffic within site boundary;
• Workers struck by working MEWP, very high risk of fatality;
• Falling materials;
MEWP operation (supervision) • MEWP operations around workers;
• Workers in MEWP operating radius;
• Reversing vehicles; • Worker struck by vehicle;•
Weekly generator check list
This generator daily inspection checklist documents routine inspections for a generator used on Project098-C58. It lists 14 items to check such as oil, fuel, and water levels, emissions, wiring connections, instruments, grounding, output power, and safety equipment. The contractor supervisor signs off after inspecting the generator each date, noting any remarks.
11 chapter eleven
Cleaning and sanitizing surfaces properly is important for food safety. To clean surfaces, they must be cleaned with soap and rinsed with water. To sanitize, surfaces must be cleaned, rinsed, then sanitized with heat or chemicals and allowed to air dry. Chemical sanitizers work best within certain concentration, temperature, contact time and water hardness ranges. Proper cleaning and sanitizing of surfaces, equipment and utensils using dishes machines or three-compartment sinks is crucial. Developing an effective cleaning program requires creating a master cleaning schedule and training employees.
Food Sanitation Chapter 12
This document discusses cleaning and sanitizing in food service operations. It covers types of cleaners like detergents, degreasers, and abrasive cleaners. Sanitizing reduces pathogens to safe levels and can be done with heat or chemicals. Proper dishwashing and cleaning of surfaces and premises is also discussed. Developing a cleaning program involves identifying cleaning needs, choosing correct cleaning materials, and training staff on cleaning procedures.
More Related Content
What's hot
Risk Assessment Example.pdf
This document provides a risk assessment for lifting operations using overhead cranes. It identifies several potential hazards including using uncertified or untrained crane operators, riggers, and lifting equipment. Control measures are outlined such as ensuring all operators and riggers are properly trained and certified, performing pre-use checks of cranes, not exceeding crane weight limits, and barricading lifting areas. Responsible parties for implementing controls and supervising work are also specified. The assessment was performed to reduce risks of injuries or property damage during crane lifting operations.
FIRE EXTINGUISHER INSPECTION Form # HSEQ - FEI Rev 4.docx
This document is a fire extinguisher inspection form to be completed twice weekly. It includes details of fire extinguishers such as their number, type, location, seal, lock, pin, pressure gauge, and discharge hose and nozzle. Inspectors check each fire extinguisher for cracks, breaks, seals and other defects, and note any required repairs or replacements in the remarks section. The inspection is reviewed and noted by safety and project management.
PRESSURE TESTING PERMIT Form # HSEQ - PTP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE TEST AND IS NOT EXTENDABLE
Description of Task:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
Design Pressure of Pipeline: Operating Pressure:
Testing Pressure: Pressure Time:
3. Pressure Testing Details: (To be filled by initiator/originator)
Type of Work Request ☐ Hydrostatic
☐ Pneumatic
☐ Gravity Testing
☐ Other :
Type of Equipment testing: ☐ Pipeline
☐ GRP ☐ AC ☐ others:
☐ Tanks
☐ Hose
☐ Other(s)
Dimensions: Pipeline/Tank/Hose
☐ Diameter:
☐ Thickness:
☐ Length:
☐ Other(s):
Attachment(s): ☐ Plan
☐ Sketch
☐ Drawing (approved)
☐ Method Statement & Risk Assessment
☐ Authority Approvals (NOCs)
☐ Road Traffic Approval (if applicable)
☐ Other(s)
4. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Is the segment of pipeline under testing isolated from service by closing nearest valves? ☐ ☐ ☐
Risk assessment/ method statement developed, approved and communicated? ☐ ☐ ☐
Is the Liquid/Gas vented/removed from the pipeline? ☐ ☐ ☐
Testing & monitoring of the environment prior to entry? ☐ ☐ ☐
Test Head and End plug/end point are properly sealed/secured/tighten. ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Is Air vented completely by pumping and filling the water in the testing segment pipeline without pressurizing? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Pressure testing equipment in good condition with available safe guards ☐ ☐ ☐
Provision of vigilance supervision? ☐ ☐ ☐
Flexible pipe/hose are in good condition and connections are safely clamped ☐ ☐ ☐
Proper barricade and signage are posted? ☐ ☐ ☐
Pressure testing gauge have valid calibration. ☐ ☐ ☐
Safe means of access/egress provided? ☐ ☐ ☐
Pressure testing gauge/ valve are in safe & accessible place outside restricted/isolated area ☐ ☐ ☐
Means of communication available? ☐ ☐ ☐
Is the testing pipeline/vessel/tank are properly isolated ☐ ☐ ☐
Electrical equipment & connections safe? ☐ ☐ ☐
Is confined space PTW required & obtained? ☐ ☐ ☐
Other(s) ☐ ☐ ☐
5. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
6. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
TOWER CRANE INSPECTION CHECKLIST Form # HSEQ - TCI Rev 2 -.docx
This document is a daily inspection checklist for tower cranes. It contains 21 items to check including the crane foundation, power system, ropes, lifts, lights, safety equipment, and operational controls. Any issues identified during inspection are noted in the comments section. The checklist is signed by both the crane operator and an HSE manager to confirm all inspections were completed for each shift. The purpose is to ensure the crane's safety through regular documented inspections.
STORE INSPECTION Form # HSEQ - Form 2 Rev 2.docx
Project Information
Project Name: Store No.
Location: Contact Person:
Company Name: Arabtec Construction LLC. Date:
Sr. Description Yes No N/A Comments
1. Is access to stores are restricted to authorized personnel only?
2. Are there clear spaces around racks and stacks of stored materials and are adequate gangways provided between them?
3. Are stacks and storage kept clear of light fittings and hot surfaces?
4. Are all stocks of flammable liquids kept in purpose-built flammable storage liquid stores?
5. Are storage areas generally cleaned and tidy?
6. Are flammable liquids kept away from all possible sources of ignition?
7. Emergency exit signs are available in right locations
8. Smoke detectors/fire alarm are visible and accessible.
9. Fire extinguishers are available are serviced regularly
10. Are free standing shelves and cupboards secured for stability?
11. Are heavy items stored at a suitable height?
12. Are chemical containers used for storage suitable and clearly labelled?
13. Is there adequate light in the storage area?
14. Are all small loose items secured in appropriate storage?
15. Are warning notices, prohibiting smoking and naked lights prominently displayed?
16. Others if any:
Remarks:
Inspected by: Signature:
Reviewed by Project Manager/HSE Manager Signature:
Electrical Hazards in the Workplace
This document discusses common electrical hazards in the workplace including arc flash. It outlines hazards such as electric shock, burns, and blast that can occur when working with energized electrical equipment. The document reviews regulations around ground-fault circuit interrupter protection, flexible cords, cabinets and boxes, lockout/tagout procedures, approach boundaries for live parts, and training requirements for qualified persons working on electrical equipment. Ensuring equipment is deenergized when possible, through lockout/tagout, is emphasized as the most effective way to eliminate electrical hazards.
Fire extinguisher monthly checklist report
This document is a fire extinguisher inspection record for contract number 098-C58 at the EPC of JIC Cooling Plant project site. It was inspected by Salman Khyder on May 2nd, 2015 and contains information on 34 fire extinguishers such as their type, condition, and inspection details. The inspection was reviewed by the safety officer.
17 Traffic Operations - Working on live roads Risk Assessment Templates.docx
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Scaffold for work access. Classed as Temporary Works Relevant Applicable MAS:
• Additional Training required:
Temporary Works Coordinator to be designated NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
P S RR
1 • Road works
• Road delineation
• Diversions
• Closures • Workers in proximity of live private vehicle routes • Worker conflict with live traffic routes;
• Worker injury due to insufficient traffic barriers or protection;
• Lane closures and diversions of high speed traffic;
• Traffic incident due to incorrect traffic management;
• Uncontrolled entry by public into work areas;
• Objects falling from site plant onto public roads;
• Night time works; 4 4 16
HIGH i. Adhere to requirements in Project Safety Plan;
ii. Traffic Safety Buffers and Worker Safety Buffers to be as Chapter 3 fig.3.3 from RTA Manual where practicable;
iii. Works undertaken adjacent to live traffic shall be clearly indicated including correct multi-language warning signs;
iv. All personnel shall be briefed on RTA standards;
v. For night time works signs and cones using flashing lights shall be used;
vi. Lane closures and diversions to be in line with RTA manual;
vii. Tail vehicle to be fitted with flashing directional arrows;
viii. Tail vehicle to allow for curves and hills in roads when situating;
ix. Tail vehicle shall be in contact with supervisor at all times by radio or mobile;
x. Ensure that where required a flagman is used to control site personnel and vehicles crossing traffic routes (o
Scaffolding checklist
This document is a scaffolding inspection checklist for a construction project to upgrade the Sungai Besi-Ulu Kelang highway to a multi-level highway. It lists various items that are checked to ensure the scaffolding was erected properly and safely, including checking that frames, braces, guardrails, and other scaffolding components were correctly positioned and fixed. The checklist also includes fields to record the inspection results, and spaces for the inspector, witness, and person acknowledging the inspection to sign off.
JSA For Work at Height.docx
This document provides a job safety analysis for work at height at the Ajyal international School Project in Dammam, Saudi Arabia. It identifies potential risks such as falling materials, unauthorized or untrained personnel, and improper scaffolding erection. Control measures include using only experienced workers, inspecting equipment, ensuring scaffolding is properly erected and braced, using fall protection when working over 1.8 meters, and complying with proper PPE. The analysis also covers risks from night work such as electric shock, improper illumination, and personal injury, and control measures like inspecting power cables, providing adequate lighting, and using required PPE. Housekeeping tasks also require barricading areas, using PPE, and controlling slip/trip hazards
JSA Aerial Lift (english) KWW
This Job Safety Analysis document provides safety guidance for operating an aerial lift. It outlines required personal protective equipment including a full body harness, safety glasses, steel-toed boots, and ear plugs. It describes pre-operation inspections of the lift and work area that must be completed each day. Proper procedures are listed for mounting and dismounting the lift basket, traveling with loads, and setting up at the work site. Fall protection is mandatory when working in an elevated basket.
Overhead crane risk assessment
Lifting operation, as a huge and complicated systems engineering, involves every aspects of enterprise production. This paper will briefly introduce some common problems and control procedures during operation for occupational safety and health .
AIR COMPRESSOR CHECKLIST Form # HSEQ - ACL Rev 2.docx
Project Information
Project Name: Serial No:
Location: Manufacture Name:
Company Name: Date :
3rd Party Inspection valid till:
Sr. Description Yes No N/A Comments
1. Are compressors equipped with pressure relief valves and pressure gauges?
2. Are signs posted to warn about hot surfaces of the exhaust?
3. Air compressor 3rd party certificate available?
4. Is whip check arrestor used in all coupling points?
5. Is the belt drive system totally enclosed to provide protection for the front, back, top, and sides?
6. Air hoses in good condition without cracks/ damages.
7. Control valves in good condition
8. Is there any oil leakage
9. Drip tray provided
10. Fire extinguisher provided
11. Any damage/Cut in tires/ tire pressure
12. Meter gauge working properly
13. Lifting Hooks damaged
14. Battery of air compressor charged
15. Visible damage
16. Exhaust directed/ close to combustibles/ flammables
17. Exhaust not directed inside any room. (Internal Combustion Air Compressors shall be kept outside in the well-ventilated area)
18. Others specify:
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / in charge : Signature:
WORK AT HEIGHT PERMIT Form # HSEQ - WHP Rev.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
Type :
Work at height without guardrails
Work at height on fragile surfaces
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator) Yes-No-NA
Method Statement and Risk Assessment developed, approved and communicated? ☐ ☐ ☐
Area barricaded & proper signage are posted? ☐ ☐ ☐
Qualified and briefed workers? ☐ ☐ ☐
PPE of workers available & inspected as per MS/RA? ☐ ☐ ☐
Tools/Equipment inspected? ☐ ☐ ☐
Safe means of access/ Egress? ☐ ☐ ☐
Lifeline available and inspected? ☐ ☐ ☐
Fragile surface covered / work surface protected? ☐ ☐ ☐
Dimensions of platform and restrain lanyard match safety requirement? ☐ ☐ ☐
Harness with double lanyard provided and its use briefed to workforce? ☐ ☐ ☐
Harness anchorage point checked? ☐ ☐ ☐
Load bearing capacity of anchoring point checked? ☐ ☐ ☐
Load bearing capacity of fragile service checked? ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Others ( Specify) ☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature : Time:
MEDICAL REPORT FORM Form # HSEQ - MRF Rev 3 -.docx
MEDICAL REPORT FORM
Day _____________
Date ____________
Time ____________
To: _________________________________________________________________________________________________________
Dear Sir,
We would kindly request you to give necessary treatment to our following employee who had met with an accident and provide us with your diagnosis.
Name of injured __________________________________________________________ Age ( ) years.
Occupation __________________________________________________________ M.B. No. _______________________________
Date of Accident ____________________________________________ Time of Accident __________________________________
Place of Accident (Project Name) _______________________________ Location _________________________________________
Nature of Accident ____________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
First Aider Name: ________________________________ SE Manager/Incharge: ________________________________
Signature: ________________________________ Signature: ________________________________
(If Medical Certificate is attached, this portion is not required.)
MEDICAL REPORT
Nature and extent of Accident / Injury____________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
Fit for duty___________________________________________________________________________________________________
Unfit for duty_________________________________________________________________________________________________
Remarks_____________________________________________________________________________________________________
____________________________________________________________________________________________________________
Signature of Medical Officer Date _______________
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Location / Area :
Panel No : Voltage:
Permit Validity:
Time (from): _______Hrs.
Time (To): __________Hrs.
Date:
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
No: Checks Yes-No-NA Checks Yes-No-NA
ENERGIZATION (“Power On”) ISOLATION (“Power Off”)
1. Safety tool box briefing done. ☐ ☐ ☐
Method statement/Risk assessment in place. ☐ ☐ ☐
2. Authorized personnel / operators available. ☐ ☐ ☐
Authorized personnel / operators available. ☐ ☐ ☐
3. Method statement/Risk assessment in place. ☐ ☐ ☐
Adjacent live areas protected. ☐ ☐ ☐
4. Safety Barriers in place and safety signage Displayed. ☐ ☐ ☐
PPE available, high voltage rubber gloves, Safety goggles and floor mat. ☐ ☐ ☐
5. Working area is well lighted. ☐ ☐ ☐
Isolation/Lock-out in place. ☐ ☐ ☐
6. Electrical instruments are available for any Purpose. ☐ ☐ ☐
Electrical circuits “proved” by calibrated Instrument and found out to be no power. ☐ ☐ ☐
7. Correct PPE available, high voltage rubber Gloves, safety goggles and floor mat. ☐ ☐ ☐
Unauthorized workers are cleared from the Area. ☐ ☐ ☐
8. Approved WIR for installation, testing and Termination are attached to the permit. ☐ ☐ ☐
Standby operatives in the event of contact With live circuits. ☐ ☐ ☐
9. Emergency light (Flashlight) available. ☐ ☐ ☐
Emergency light (Flashlight) available. ☐ ☐ ☐
10. Is live work absolutely necessary? ☐ ☐ ☐
Emergency response plan available ☐ ☐ ☐
11. Unauthorized workers are cleared from the area.
☐ ☐ ☐
Other ( Specify): ☒ ☐ ☐
12. Power cable route from panel board to plant & equipment has been checked ☐ ☐ ☐
13 Emergency response plan available ☐ ☐ ☐
14 Other ( Specify): ☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
Lifting plan template
This document provides a lifting plan, risk assessment, and method statement for lifting operations. It includes details of the load, cranes, lifting accessories, hazards identified, risk assessment, responsibilities of personnel, and acceptance signatures. The key details are the load weight and dimensions, crane models and capacities, identified hazards like overhead power lines, and the sequence of operations. Personnel roles like appointed person, slinger, and crane supervisor are defined. Weather limits and ground conditions are also addressed.
CONFINED SPACE ENTRY PERMIT Form # HSEQ - CSE Rev 3.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
(This permit is only for one shift and is not extendable)
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement and Risk assessment developed, approved and communicated? ☐ ☐ ☐
Provision of vigilance supervision? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Safe means of access/egress provided? ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Means of communication available? ☐ ☐ ☐
Proper signage are posted? ☐ ☐ ☐
Workplace appropriately illuminated? ☐ ☐ ☐
Electrical equipment & connections safe? ☐ ☐ ☐
Ventilation means are available & used before entry? ☐ ☐ ☐
Gases/ hazardous material Isolation is done (LOTO)? ☐ ☐ ☐
Will ventilation be continued during work? (LEV) ☐ ☐ ☐
Mechanical & electrical equipment isolation done (LOTO)? ☐ ☐ ☐
Harness/lifeline/ mechanical retrieval system (tripod) available? ☐ ☐ ☐
Will any other equipment be used/ running in the space? ☐ ☐ ☐
SCBA is maintained & available? ☐ ☐ ☐
Will any chemical be used in the space? ☐ ☐ ☐
Trained stand-by man available? ☐ ☐ ☐
Was the space been found unacceptable? ☐ ☐ ☐
Others( Specify) ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
☐ ☐ ☐
4. Trained Authorized Individuals: (To be filled by initiator/originator)
Entry Supervisor:
Stand-by Man:
First Aider(s)
Rescuer: 1. 2.
Authorized Entrants: 1. 2.
3. 4.
Equipment/ Materials details to be used
Details of Chemicals to be used (MSDS attached)
5. Atmospheric Conditions: (To be tested by authorized tester)
Authorized Tester(s):
Time O2 LEL H2S CO Heat (C) Other
Pre-entry 1. O2 – 19.5% to 23.5%
2. LEL – less than 10%
3. H2S – below 10 ppm
4. CO – PEL-below 35 ppm
Pre-entry after Vent
During Work
Others
Others
6. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any) :
7. Authorization (PM/CM):
Name: Designation:
Signature: Time:
8. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I
19 use of mobile elevated work platforms risk assessment templates
19 Use of Mobile Elevated Work Platforms Risk Assessment Templates
MEWP checks on arrival to site
PRIOR TO SITE ACCESS • Use of Access plant • Unauthorized operation of the plant resulting in incident;
• Failure due to use of un-certificated plant;
MEWP operation
(Operator) • Operator competency;
• Plant / pedestrian interaction;
• Work at Height; • Incident due to use of defective plant or associated equipment;
• MEWP overturning;
• Plant reversing – risk of serious injury to pedestrians;
• Unauthorized use of MEWP by untrained personnel;
• Operators climbing onto hand rails;
• Collision with other plant and live traffic within site boundary;
• Workers struck by working MEWP, very high risk of fatality;
• Falling materials;
MEWP operation (supervision) • MEWP operations around workers;
• Workers in MEWP operating radius;
• Reversing vehicles; • Worker struck by vehicle;•
Weekly generator check list
This generator daily inspection checklist documents routine inspections for a generator used on Project098-C58. It lists 14 items to check such as oil, fuel, and water levels, emissions, wiring connections, instruments, grounding, output power, and safety equipment. The contractor supervisor signs off after inspecting the generator each date, noting any remarks.
What's hot (20)
FIRE EXTINGUISHER INSPECTION Form # HSEQ - FEI Rev 4.docx
FIRE EXTINGUISHER INSPECTION Form # HSEQ - FEI Rev 4.docx
PRESSURE TESTING PERMIT Form # HSEQ - PTP Rev 2 -.docx
PRESSURE TESTING PERMIT Form # HSEQ - PTP Rev 2 -.docx
TOWER CRANE INSPECTION CHECKLIST Form # HSEQ - TCI Rev 2 -.docx
TOWER CRANE INSPECTION CHECKLIST Form # HSEQ - TCI Rev 2 -.docx
17 Traffic Operations - Working on live roads Risk Assessment Templates.docx
17 Traffic Operations - Working on live roads Risk Assessment Templates.docx
AIR COMPRESSOR CHECKLIST Form # HSEQ - ACL Rev 2.docx
AIR COMPRESSOR CHECKLIST Form # HSEQ - ACL Rev 2.docx
MEDICAL REPORT FORM Form # HSEQ - MRF Rev 3 -.docx
MEDICAL REPORT FORM Form # HSEQ - MRF Rev 3 -.docx
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
CONFINED SPACE ENTRY PERMIT Form # HSEQ - CSE Rev 3.docx
CONFINED SPACE ENTRY PERMIT Form # HSEQ - CSE Rev 3.docx
19 use of mobile elevated work platforms risk assessment templates
19 use of mobile elevated work platforms risk assessment templates
Similar to CHECKLIST SALON Form # HSEQ - CS Rev 2.docx
11 chapter eleven
Cleaning and sanitizing surfaces properly is important for food safety. To clean surfaces, they must be cleaned with soap and rinsed with water. To sanitize, surfaces must be cleaned, rinsed, then sanitized with heat or chemicals and allowed to air dry. Chemical sanitizers work best within certain concentration, temperature, contact time and water hardness ranges. Proper cleaning and sanitizing of surfaces, equipment and utensils using dishes machines or three-compartment sinks is crucial. Developing an effective cleaning program requires creating a master cleaning schedule and training employees.
Food Sanitation Chapter 12
This document discusses cleaning and sanitizing in food service operations. It covers types of cleaners like detergents, degreasers, and abrasive cleaners. Sanitizing reduces pathogens to safe levels and can be done with heat or chemicals. Proper dishwashing and cleaning of surfaces and premises is also discussed. Developing a cleaning program involves identifying cleaning needs, choosing correct cleaning materials, and training staff on cleaning procedures.
Clean premisese and equipments
The document provides information about cleaning premises and equipment in the hospitality industry. It defines key terms related to chemical safety, storage, and disposal. It explains that cleaning duties should be assigned to specific areas while avoiding interruptions. A variety of cleaning equipment is described, including microfiber cloths, brooms, buckets, mops, and scrubbing brushes suited to different surfaces. Protective equipment like gloves should be worn. The document emphasizes selecting cleaning agents and storing chemicals appropriately according to manufacturers' guidelines.
2NDPPT_FOR9.pptx
This document discusses the importance of proper preventative and corrective maintenance for nail care tools and equipment. It emphasizes cleaning, disinfecting, and sterilizing tools after each use to prevent bacterial and fungal infections. Specifically, it outlines the steps to properly sterilize metal implements, sanitize wooden tools, and disinfect surfaces. The document stresses performing maintenance regularly to ensure a safe and hygienic work environment.
LAUNDRY HEALTH INSTRUCTION Form # HSEQ - LSI- Rev 2.docx
Project Information
Accommodation Name:
Location: Company Name:
Date: Time :
Sl No. ITEMS TO BE CHECKED Yes No N/A Comments
Audit Check List for Laundry
1 The premises are cleaned & situated in an environment which has minimum risk for contamination.
2 Sufficient area for storage of unwashed clothes & washed clothes.
3 Washing & drying premises was found cleaned & in good condition.
4 There are arrangements to control the entry of rodents, insects and birds.
5 Clothes are collected washed & dried separately.
Infection Control Checklist Laundry Personnel
1 Clean, neat, untorn and appropriate clothing is worn
2 Closed toe shoes with safety soles and in good repair are worn
3 Good personal hygiene (including hair and body cleanliness) is practiced
4 Fingernails are clean and trimmed
5 Hair is neat and protected by covering
6 Strict clothing and linen handling procedures are followed to avoid contamination
7 Direct resident contact is avoided except in emergency situations
8 Rubber gloves and protective covering are worn when handling and loading soiled linen
9 Disposable gloves are worn when handling isolation supplies
10 Injuries and suspected infections are reported immediately
11 Personnel are oriented to infection control policies on hiring; this is documented
12 Personnel attend department/facility-wide infection control in services monthly
13 Personnel are screened for infectious diseases on hiring and at further facility discretion
14 Personnel are informed of potential dangers/toxicities of cleaning compounds
15 Personnel, when informed of these potential dangers, follow safety procedures/precautions
16 Personnel are aware of methods to handle supplies and disposal of globes/equipment
Washing/Folding/Cleaning/Storage
1 Wash/rinse temperatures are maintained at a minimum of _____of for regular linen
2 Dryer temperatures are set at _____of for linen and regular clothes
3 Clean linens are transported in covered containers and stored in covered areas
4 Dirty linens are separated from clean ones at all times
5 Soiled linens are kept in a covered barrel at all times
6 Linen barrels are lined with plastic bags which cover the inside surface at all time
7 Isolation linen is transported as outlined in the Infection Control Manual
8 Linen folding surfaces are cleaned with a detergent germicide solution
9 All laundry appliances (washers/dryers, carts) are cleaned daily with detergent germicide solution
10 Supplies for clothing/equipment cleaning approved by Infection Control Committee
11 Equipment and supply problems are immediately reported to the administrator
………………………………………………….………………………………………………………………………………………………………………………………………..
Laundry Condition & Specific Location if needed: Initial
Foot spa tools
1. The document outlines the procedures and supplies for a hands and feet spa treatment.
2. It details 15 steps for the hands spa treatment including soaking, scrubbing, applying lotion and paraffin wax.
3. It also lists the tools, materials and 13 step procedure for a manicure and pedicure treatment.
BeautySafe Esthetics
BeautySafe is an online education tool created by BeautyCouncil to promote safe sanitation protocols and standards in the beauty industry. It was created in response to the lack of health and safety standards in the industry and public health concerns. BeautySafe certification training provides benefits like reduced health risks, enhanced client confidence, and assisting professionals to refresh their knowledge on safety standards. ALL personal service workers are recommended to complete the BeautySafe certification which is valid for 3 years.
DLL-Q1-COOKERY-9 (1).docx
This document outlines learning objectives, competencies, content, procedures and resources for a lesson on cleaning and sanitizing kitchen tools, equipment, and premises. The objectives are to understand how to maintain a clean kitchen. Key points include identifying areas that need cleaning, such as floors, sinks, stoves, walls and storage areas. Proper cleaning involves using the correct cleaning agents and following safety procedures. The lesson also addresses establishing a cleaning schedule and storing tools appropriately after cleaning.
Padgett Instruments Cleaning Instructions
These instructions summarize the reprocessing steps for reusable medical devices supplied by PADGETT INSTRUMENTS, including cleaning, inspection, lubrication, packaging, sterilization and storage. Key steps include cleaning devices using an automated washer or manually to remove all soil, inspecting devices to ensure all surfaces are clean, applying lubricant to joints, packaging according to standards, sterilizing using steam sterilization, and storing in dry conditions until next use. It is the responsibility of the reprocessor to properly reprocess devices to achieve decontamination.
How to Clean Your Airbnb Property.docx
Airbnb is growing and proving to stay. While the number of may be on the decline, the demand keeps growing globally. For one reason to the other, more local and international travelers opt for Airbnb properties than the traditional hotels. This calls for Airbnb hosts to up their cleaning standards to satisfy the ever-growing demand.
Most Airbnb units are either apartments, villas, cottages, houses, etc. Cleaning an Airbnb unit is not similar to cleaning a hotel room or to cleaning for your boss in his/ her private home.
Here are the steps to clean your Airbnb property:
• Step# 1 - Prepare your cleaning material, chemicals and equipment
• Step# 2 – Check for Airbnb property items
• Step# 3 - Remove trash and linen and spray the bathroom
• Step# 4 - Soak the dishes and wash linen
• Step# 5 - Clean the kitchen and utensils
• Step# 6 - Dust and damp wipe
• Step# 7 – Make the bed
• Step# 8 - Clean the bathroom
• Step# 9 - Replenish items
• Step# 10 - Iron and fold linen
• Step# 11 - Clean the floor
• Step# 12 - Inspect your work
Prepare your Cleaning Material, Chemical and Equipment
The first step is very crucial. In order to carry out your work efficiently, you have to prepare! Remember the 5Ps? Proper, Planning, Prevents, Poor, Performance. Prepare everything you will need to clean the Airbnb property. Most Airbnb properties are self-catering, so consider that cleaning is slightly different to cleaning a hotel room. Here is what you need to prepare:
Cleaning Agents - Types of cleaning agents varies from one property to another. Any of the following products may apply in the cleaning of self-catering areas:
• Neutral detergent or all-purpose cleaner – Used for cleaning floors, walls, surfaces that may be harmed by strong chemicals, fridges, bread bins and closed containers.
• Glass cleaner - Quick drying, streak free glass cleaner.
• Non-ammoniated glass cleaner - Acrylic and plastic surfaces.
• Sanitizer - Sanitizes all cleaned surfaces/ cleans surfaces and areas such as cutting boards, kitchen equipment, sinks and fridges.
• Stripper / degreaser/oven cleaner - stoves, ovens and racks, garbage cans, disposal containers and garbage disposal areas.
• Chlorinated cleaner or disinfectant – garbage areas, cans disposal areas.
• Brooms and mops – for sweeping and mopping.
• Colour-coded cloths – for dusting and damp wiping.
• Gloves – for your protection
There are five basic steps for any cleaning to be effective
• Pre-cleaning - Remove food scraps, dirt and grease by soaking, scraping, rinsing and sweeping.
• Main cleaning - Remove surface dirt, food debris, marks or grease by washing and scrubbing using a detergent.
• Sanitizing - Use a chemical sanitiser or very hot water to rinse or soak.
• Air drying - Allow items to air dry naturally on a clean, dry sanitised surface.
• Post cleaning - Make sure all sinks are thoroughly rinsed out and that the drainage is free of waste and blockages. Rinse and hang mops and cloths to air dry them.
102 clean and maintain washrooms
This document provides guidance on cleaning and maintaining washrooms. It outlines the importance of personal protective equipment, hand hygiene, and cleaning from clean to dirty areas to prevent cross-contamination. The steps for cleaning toilets, washbasins, and replenishing supplies are described. Personal hygiene and proper waste disposal are also covered. The goal is to eliminate bacteria in washrooms and prevent the spread of illnesses.
Haccp food safety booklet
This document outlines procedures for a Hazard Analysis and Critical Control Points (HACCP) food safety and quality assurance manual. It includes definitions of key food safety terms, as well as policies and procedures for management, hiring, emergencies, food safety, employees, sanitation, and quality assurance forms. The goal is to prevent foodborne illness through error-free food production by identifying critical control points and monitoring temperatures, times, and procedures.
Perform basic preventive and corrective maintenance (TLE) FOR GRADE 7
This document provides instructions for properly sterilizing and storing tools, maintaining cleanliness in the workplace, and disposing of waste materials in a beauty salon. It recommends sterilizing metal implements after each use by soaking them in hospital-grade disinfectant for 10 minutes. It also recommends disinfecting foot basins after each use with a bleach solution and sterilizing all tools once a month by boiling them for 10 minutes. The document stresses the importance of keeping the salon well-ventilated, rodent-free, and with clean curtains, floors, and restrooms. Waste should be disposed of frequently in a closed, lined waste bin.
Untitled-presentation.pdf
This document provides information about nail care, including the tools, materials, equipment, and processes involved. It discusses:
1) The various tools used in nail care like nail files, cuticle nippers, buffers, and brushes.
2) The materials needed like cotton, plastic spatulas, towels, and nail cosmetics.
3) Equipment such as disinfection containers, manicure pillows, and supply trays.
4) The importance of maintaining and safely storing tools, as well as following occupational health and safety procedures.
K 12 basic education curriculum technology and livelihood education c00kery 1 2
This document discusses chemicals used for cleaning and sanitizing kitchen tools and equipment. It identifies the main types of cleaning products including abrasive cleaners, detergents, chlorine or bleach, sanitizers, disinfectants, and specialist cleaning agents. It provides details on their uses and safety guidelines for using cleaning products, such as only using them as directed, wearing protective equipment, properly storing and disposing of chemicals, and following manufacturer instructions.
THE IV ROOM PROJECT
The document summarizes the requirements for an IV room project based on USP <797> standards. It discusses the primary engineering controls including laminar airflow workbenches and biological safety cabinets. It also outlines the architecture of buffer and ante areas, recommended devices for compounding, cleaning and disinfecting frequency guidelines, personnel hygiene and garbing procedures, packaging and labeling standards, and staff responsibilities. The IV room is designed to meet most USP requirements, with some exceptions like not fully separating the buffer and ante areas into different rooms.
Employsure Workplace Presentation | Workplace Hygiene
This presentation by Employsure provides an overview of workplace hygiene. Including what to include in a workplace hygiene policy and the correct handwashing steps. It is designed to help employers understand their rights and obligations.
With one of the most complex workplace relations systems in the world it's a challenge for owners and managers of SMEs in Australia to ensure they are compliant. Small businesses often struggle to understand their obligations to employees and that's where Employsure can help.
Employsure protects employers from risks by providing unlimited advice, legally compliant documents, insurance and representation. Employsure is a workplace relations specialist dedicated to helping small businesses succeed by creating fair and safe workplaces.
Call us: 1300 651 415
Visit us at: https://employsure.com.au/
LinkedIn: https://www.linkedin.com/company/empl...
Facebook: https://www.facebook.com/employsure.c...
Twitter: https://twitter.com/Employsure
MODULE2.STEPS IN SANITIZING EQUIPMENT.pptx
1. The steps for sanitizing equipment are to read disinfectant directions, measure and mix the disinfectant, saturate a cleaning cloth and wipe the entire surface, wipe with a paper towel to dry, and dispose of used materials.
2. The steps for sterilizing metal implements are to soak in soapy water to remove debris, place in 70-90% alcohol for 20 minutes, remove and wipe dry and place in dry sterilizer.
3. The steps for sanitizing wooden implements are to cleanse the sanitizing jar, line with sterile cotton, place implements in handles up, and fill with 70-90% alcohol to cover surfaces.
PERSONAL PROTECTIVE EQUIPMENT (PPE) Nail Care.pptx
This document provides information on personal protective equipment (PPE) and safety procedures for nail care. It discusses various types of PPE like gloves, smocks, masks, and headbands. It also outlines the importance of sanitizing and sterilizing tools and equipment, including the differences between sanitization, disinfection, and sterilization. Proper preparation and storage of tools is described, along with disposing of waste and maintaining a sanitary workspace.
steps in giving hand spa treatment
The document outlines the 10 step procedure for providing a hand spa treatment which includes preparing supplies, washing and drying the hands, applying lotion, soaking the hands in paraffin wax for 10-15 minutes, removing the wax, applying a softening product and massage. It also discusses the importance of decontamination to prevent infections by removing pathogens from tools and surfaces through proper storing and sanitation techniques in the salon.
Similar to CHECKLIST SALON Form # HSEQ - CS Rev 2.docx (20)
LAUNDRY HEALTH INSTRUCTION Form # HSEQ - LSI- Rev 2.docx
LAUNDRY HEALTH INSTRUCTION Form # HSEQ - LSI- Rev 2.docx
Perform basic preventive and corrective maintenance (TLE) FOR GRADE 7
Perform basic preventive and corrective maintenance (TLE) FOR GRADE 7
K 12 basic education curriculum technology and livelihood education c00kery 1 2
K 12 basic education curriculum technology and livelihood education c00kery 1 2
Employsure Workplace Presentation | Workplace Hygiene
Employsure Workplace Presentation | Workplace Hygiene
PERSONAL PROTECTIVE EQUIPMENT (PPE) Nail Care.pptx
PERSONAL PROTECTIVE EQUIPMENT (PPE) Nail Care.pptx
More from Dwarika Bhushan Sharma
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB
3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP.pdf
3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP-STOP FALLS, CLEAN UP, PICK UP, WIPE UP
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK 2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK
1-HAZARDOUS CHEMICALS.pdf
This document provides the name of a company but no other details. It contains only the words "Company Name" with no other context or information provided. In just two words, the document states the name of a company without any other descriptive text.
PRE-START BRIEFING Form # HSEQ - PSB Rev 2 -.docx
Project Information:
Project Name:
Location: Supervisor :
Company name : Date:
Task Description:
Before work starts, the following must be in place
Induction Supervision Test Certificates Communication in same language Method Statement Risk Assessment Permit To Work Area Lighting
SELECT HAZARDS SELECT CONTROLS
( Tick to identify the controls in place)
Fall from height Training Access Ladder Access Handrail Edge Protection Secure Ladder Adequate Work Platform Guards for Openings Safety Harness Life Lines
Others( Specify)
Manual Handling Training Check Weight Mechanical Aids Access Route Team Lifting Wrong method Right Method
Power tools Training Color code inspection tag Check Cable Wheel guards Safe plug & sockets Cable Protection Proper Scaffold Cable Overhead Rotatory part guards
Scaffold Scaffold Tag Edge Protection Check Overhead works Access Ladder Adequate Work Platform Weather condition Out riggers Ladder 3 feet above platform Safety Harness
SELECT HAZARDS SELECT CONTROLS
( Tick to identify the controls in place)
Risk Assessment
Lifting Plan Tag Lines Lifting points / hooks Banks man Load stability Check Lifting gear Examination /Inspection Sharp edges protected
Lifting operations Weather/ Wind Speed Ground conditions Exclusion zone Communication Loading/ unloading vehicles Spreader Beams Check Ground conditions Check outriggers Others
Fire Fire Extinguisher Fire Hose Fire Exit Assembly point others
Slip/Trip Clean before you go Barricade the waste Waste Management Clean Access Housekeeping Clean liquid spillage Access signs Maintain access/ Egress
PPE
Safety Harness
Safety Helmet Coveralls Hi vis Jacket Safety Shoe Face Shield Ear Protection
Dust mask Respiratory Equipment Life line/ harness anchorage Hand Gloves Goggles/ Glass
Pre start Briefing done by: Signature:
Reviewed By HSE Manager/ In charge: Signature:
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
Code of Practice
C.O.P # 01
Fire Prevention Requirements
(Management of Combustible Materials & Electrical Inspections)
Rev. 01, Mar 23
WITNESS STATEMENT FORM.docx
This document records a statement for a project located at an unspecified location. The statement is provided and written by an individual who acknowledges that the information is true to the best of their recollection. The individual provides their name, signature, position and date at the end of the statement.
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
1. Project Information:
Project Name: Click here to enter text.
Report No.: Click here to enter text.
Project Location: Click here to enter text.
Property No.: Click here to enter text.
☐ Fatality ☐ Major Injury ☐ Minor Injury ☐ Property Damage ☐ Environmental ☐ Other
2. Describe the Incident in detail:
Answer who, what, why, where, when & how in this section: (Attach additional pages if required)
3. Incident Root Causes:
Describe direct, indirect & root cause: (Attach additional pages if required)
4. Key Corrections Taken Immediately after the Incident:
Attach additional pages if more space is required:
5. Key Corrective Actions to Prevent Recurrence:
Describe the corrective actions with timeframe: (Attach additional pages if required)
Corporate Office Remarks:
HSE FORMS (COVER PAGE)2 Form # HSEQ - Rev 2.docx
This document pertains to health, safety, environment, and quality forms from an HSEQ department. The HSEQ department handles forms related to health, safety, environment, and quality assurance. No other details are provided about the specific forms or purpose of the HSEQ department.
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
Project Information
Project Name:
Date: Location:
Sr. Equipment type / Name Registration No & Exp Date Company Name
Operator Name / Mb. No Operator Third party competency certificate expiry date Operator License expiry date Equipment & Plant 3rd Party Inspection Certificate expiry date SWL / Capacity Signalman /Rigger name & TPC Exp Comment
1
2
3
4
5
6
7
8
9
10.
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge: Signature:
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
This 5-page document is a checklist for inspecting labour accommodation on a weekly basis. It contains over 100 questions across various categories including access/egress, housekeeping, septic tanks, food preparation, living quarters, firefighting, emergency procedures, first aid, record keeping, environment, and civil defence requirements. Inspectors are to verify that accommodation meets standards for safety, sanitation, emergency preparedness and regulatory compliance by completing the checklist and noting any needed corrective actions or due dates.
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
INCIDENT INVESTIGATION REPORT
(To be submitted to the HSEQ Corporate Office within 7 days of incident.)
1. Project Information:
Project Name: Click here to enter text.
Report No.: Click here to enter text.
Project Location: Click here to enter text.
Property No.: Click here to enter text.
☐ Fatality ☐ Major Incident ☐ Minor Incident
2. Describe the Incident in detail:
Answer who, what, why, where, when & how in this section: (Attach additional pages if required)
Click here to enter text.
☐ Photos Attached
3. Incident Root Causes:
Describe direct, indirect & root cause: (Attach additional pages if required)
Click here to enter text.
4. Key Corrective Actions to Prevent Recurrence:
Describe the corrective actions with timeframe: (Attach additional pages if required)
Click here to enter text.
5. Key Corrections Taken Immediately after the Incident:
Attach additional pages if more space is required:
Click here to enter text.
6. Witnesses:
I declare that I witnessed the incident and the information provided above is true, correct and complete.
No. Name Designation Signature Date
1. Click here to enter text.
Click here to enter text.
Click here to enter text.
2. Click here to enter text.
Click here to enter text.
Click here to enter text.
7. Incident Information:
Initial Incident Report No.: Click here to enter text.
Date Reported: Click here to enter text.
Date of Incident: Click here to enter text.
Time of Incident: Click here to enter text.
Type of Incident: ☐ Near Miss
☐ Major Environmental Incident
☐ Serious Dangerous Occurrence
☐ Equipment / Property Damage
☐ Medical Treatment Case (MTC)
☐ Restricted Work Case (RWC)
☐ Lost Workday Case (LWC)
☐ Serious Occupational Illness/Disease
☐ Class 1 Injuries
☐ Permanent Partial Disability (PPD)
☐ Permanent Total Disability (PTD)
☐ Fatality (F)
Recordkeeping: ☐ Reportable ☐ Recordable
Incident Location on Site: Click here to enter text.
Applicable Reports: ☐ Police
☐ Medical
☐ Other (Specify)
Click here to enter text.
Attached: ☐ Yes ☐ No
☐ Yes ☐ No
☐ Yes ☐ No
8. Injured Person’s Personal Details:
In case of an incident with more than one injured person, complete the information for each person using separate forms.
Name: Click here to enter text.
Occupation: Click here to enter text.
Company: Click here to enter text.
MB / Oracle No.: Click here to enter text.
Nationality: Click here to enter text.
Date of Birth: Click here to enter text.
Passport Number: Click here to enter text.
Length of Service: Click here to enter text.
Gender: ☐ Male ☐ Female
Labour Card No.: Click here to enter text.
9. Incident Causes Details: To be supported with factual evidence
Immediate Cause
(Unsafe Acts) ☐ Failure to secure
☐ Failure to warn
☐ Removing / Defeating Safety Devices
☐
HSE INDUCTION Form # HSEQ - HSEI Rev 2 -.doc
HSE INDUCTION
(Workers)
Name: _________________________________ Trade: ____________________________
M.B. No./Company Name : ________________
Date of Joining: __________________________
SL. N SUBJECT ON INDUCTION PREVIOUS SAFETY EXPOSURE FURTHER SAFETY TRAINING NEED ANALYSIS
1. Introduction Safety Requirements
2. Working Safety is of Primary Importance
3. General Safety Rules
4. Basic Safety Requirements
5. House Keeping
6. Health, Hygiene & Welfare Facilities
7. Fire Extinguisher / Fire Fighting
8. Emergency Procedure
9. Safety Violations & Penalty
10. Safety Award
11. Manual Handling
Induction Given By: Name: ___________________________
Designation: ___________________________
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
1st Warning 0 Ref. No. ______________
2nd Warning 0
3rd Warning 0
4th Warning 0 Date: ________________
Employee’s Name : ______________________________________ M.B No. : __________
Occupation : _____________________________________________________________________
Location / Project Site: _____________________________________________________________________
You have committed the following HSE violation/s:
………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….….
The employee is hereby warned that if the violation is repeated further disciplinary action can be
taken as per the company Code of Conduct.
ORIGINATOR APPROVED BY (MANAGER IN CHARGE / ARABTEC HSEQ & ORG. RISK Manager)
Name: _______________________________ Name: _____________________________
Designation: _______________________________ Designation: _____________________________
Signature:
_______________________________ Signature:
_____________________________
Employee Acknowledgement:
I the undersigned have received this Safety warning letter / disciplinary notice and I admit that I have understood the contents.
0 Received on: ………………………….. (Date) Signature: ………………………………..…..
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
Project Information
Project Name: Porta Cabin No:
Location: Contact Person:
Company Name: Date :
Sr. Description Yes No N/A Comments
1. Emergency exit signs are available in right locations
2. Fire alarms and fire extinguishers are visible and accessible.
3. Fire doors (e.g. in stairways) are kept closed unless equipped with automatic closing device
4. Fire extinguishers are serviced regularly
5. Corridors and stairways are kept free of obstruction
6. Fire escape/ evacuation plan available and posted
7. First aid box available
8. Floor surfaces are kept dry and free of slip hazards
9. Electrical cords and plugs are in good condition with proper Grounding
10. Kitchen equipment checked
11. Fire blanket available in the pantry
12. Heat detector available in the pantry
13. Toilets floor clean and dry
14. Are staff trained to use Fire Extinguishers
15. Hand wash/ soap solution available in the toilet
16. Civil Defense or Authority approval
17. Others if any:
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
LIFTING TACKLE VISUAL INSPECTION & REGISTER Form # HSEQ - LTVIR Rev 3.docx
Project Information
Project Name:
Company Name: Date :
ID NO TYPE OF LIFTING GEARS LOCATION VISUAL INSPECTION THIRD PARTY INSPECTION VALID TILL MONTHLY COLOUR CODE
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
☐ OK ☐ Not OK
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
FULL BODY HARNESS INSPECTION RECORD Form # HSEQ - FBHIR Rev 2.docx
Harness Checklist
Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Remarks
Shoulder Straps
Chest & Back Straps
Waist Straps
Back D-Ring
Shoulder Adjustment
Legible Label
Shoulder Straps
Chest & Back Straps
Waist Straps
Leg Straps
Cuts
Burns
Holes
Deterioration
Corrosive/ worn out
Color code
Others (Specify)
Project Information
Project Name: Location:
Company name : Date:
Remarks:
Inspector Name: Signature:
Reviewed By HSE Manager / Incharge Signature:
GENERAL SITE SAFETY RULES Form # HSEQ - Rev 2.docx
Always wear proper personal protective equipment and inspect and maintain it. You are responsible for your own safety and others, so report any unsafe acts or conditions and avoid taking shortcuts or engaging in horseplay or fights. Communicate risks and follow all safety procedures and instructions.
HAZARDOUS SUBSTANCE CHECKLIST Form # HSEQ - HSC Rev 2 -.docx
Project Information
Project Name:
Location:
Company Name: Date :
Sl. No Description Yes No N/A Comments
1. Properly stored, labeled, ventilated, isolated, Log and suitable signs displayed.
2. Material Data Safety Sheet (MSDS) available, and communicated to concerned personnel.
3. Adequate/ Sufficient firefighting equipment are in place.
4. Emergency escape and breathing apparatus available, tested and in good condition.
5. Hazardous substances containers/drums have eligible labeling and protected from leakages or spillage.
6. Personnel must be trained in chemical handling.
7. Emergency control plan must be made available, spillage control kits must be available.
8. Empty hazardous substances containers, drums and receptacles should be properly maintained and controlled.
9. Expired chemicals are logged, segregated and disposed properly
10. Others Specify
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
More from Dwarika Bhushan Sharma (20)
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
LIFTING TACKLE VISUAL INSPECTION & REGISTER Form # HSEQ - LTVIR Rev 3.docx
LIFTING TACKLE VISUAL INSPECTION & REGISTER Form # HSEQ - LTVIR Rev 3.docx
FULL BODY HARNESS INSPECTION RECORD Form # HSEQ - FBHIR Rev 2.docx
FULL BODY HARNESS INSPECTION RECORD Form # HSEQ - FBHIR Rev 2.docx
GENERAL SITE SAFETY RULES Form # HSEQ - Rev 2.docx
GENERAL SITE SAFETY RULES Form # HSEQ - Rev 2.docx
HAZARDOUS SUBSTANCE CHECKLIST Form # HSEQ - HSC Rev 2 -.docx
HAZARDOUS SUBSTANCE CHECKLIST Form # HSEQ - HSC Rev 2 -.docx
Recently uploaded
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Presentation on Food Delivery Systems
This presentation is about Food Delivery Systems and how they are developed using the Software Development Life Cycle (SDLC) and other methods. It explains the steps involved in creating a food delivery app, from planning and designing to testing and launching. The slide also covers different tools and technologies used to make these systems work efficiently.
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
Begin your journey to contribute to Selenium - A Talk at the Selenium Conference 2024
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Butterfly Valves Manufacturer (LBF Series).pdf
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Beckhoff Programmable Logic Control Overview Presentation
This presentation is to describe the overview of PLC Beckhoff for beginners
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
This study Examines the Effectiveness of Talent Procurement through the Imple...
In the world with high technology and fast
forward mindset recruiters are walking/showing interest
towards E-Recruitment. Present most of the HRs of
many companies are choosing E-Recruitment as the best
choice for recruitment. E-Recruitment is being done
through many online platforms like Linkedin, Naukri,
Instagram , Facebook etc. Now with high technology E-
Recruitment has gone through next level by using
Artificial Intelligence too.
Key Words : Talent Management, Talent Acquisition , E-
Recruitment , Artificial Intelligence Introduction
Effectiveness of Talent Acquisition through E-
Recruitment in this topic we will discuss about 4important
and interlinked topics which are
Recently uploaded (20)
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques.ppt
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Beckhoff Programmable Logic Control Overview Presentation
Beckhoff Programmable Logic Control Overview Presentation
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
This study Examines the Effectiveness of Talent Procurement through the Imple...
This study Examines the Effectiveness of Talent Procurement through the Imple...
CHECKLIST SALON Form # HSEQ - CS Rev 2.docx
- 1. SALON INSPECTION CHECK LIST Page 1 of 1 Form # HSEQ - CS Rev 2 - Mar 23 Accommodation Name: Location: Company Name: Date: Time : ITEMS TO BE CHECKED Yes No N/A Comments 1 Tools and towel cleaned and sterilized 2 Tools sterilizer available and is working properly 3 Disposable blades and tools not used before and to be discarded after use. 4 Worker in salon washes his hands before and after serving customers. 5 Use clean and sterilized hair brushes that are kept in clean and suitable drawers. 6 Non-metal nail care tools and face sponges must be disposable and packaged well. 7 Below areas are Cleaned and disinfected Sitting and servicing areas, floors, surfaces, corners, sauna and steam rooms, as well as cabinets, shelves, drawers, curtains and toilets. 8 First aid box with valid contents ready for use 9 Cosmetics label written in Arabic and English and includes source, contents, methods of storing and usage and stored according to producer instructions 10 Is the water sinks are clean. 11 Is Covered waste bin provided for waste collection? 12 Is facial machines maintained clean and disinfected. 13 Is No smoking strictly Observed? Avoid practicing the following in beauty salons: Pimples and acne removal, skin scraping tattoo, ear piercing. Observation Remarks: Inspected By: Signature: Reviewed By HSE Manager / In charge : Signature: