3. PPE…
•Are the garments designed to
protect the wearer’s body form
injury or chemicals or for job-
related occupational safety and
health purposes.
14. CHECK CONDITION OF TOOLS AND
EQUIPMENT
•It is important to
assemble, sanitize and
sterilize all the necessary
items before starting any
nail care activity.
22. Preparation of Equipment to be
Sanitized…
1. Read directions on disinfectant.
2. Measure and mix disinfectant as directed.
3. Saturate a cleaning cloth with disinfectant
solution and wipe entire surface area of
equipment.
4. Wipe the surface with paper towel to dry it.
5. Dispose of sanitizing solution and used
24. ANSWER…
1. It is the process of destroying all
living micro-organisms.
a. Sanitation ion
b. Disinfecting
c. Sterilization
d. Sanitization
25. ANSWER…
2. It is the process of destroying some, but
not all micro-organisms using heat or
antiseptics.
a. Sanitation
b. Disinfecting
c. Sterilization
d. Sanitization
26. ANSWER…
3. It is a substance used to control
micro-organisms on non-living surfaces.
a. Antiseptic
b. Solvent
c. Disinfectant
d. Nail Hardener
27. ANSWER…
4. t is an agent that prevents the
multiplication of micro-organisms.
a. Antiseptic ant
b. Solvent
c. Disinfect
d. Nail Hardener
28. ANSWER…
5. It is the application of measures to
promote public health and prevent the
spread of infectious diseases.
a. Sanitation ion
b. Disinfecting
c. Sterilization
d. Sanitization
30. Preparation of metals implements for
sterilization…
1. Soak the tools/ implements in hot, soapy water
solution to remove any debris and oil residue.
Rinse them thoroughly.
2. Place the tools/implements in a 70% to 90%
alcohol solution for 20 minutes.
3. Remove the tools/implements from solution,
wipe them dry, and place them into a dry
sterilizer.
31. Preparation of the sanitizing jar…
1. Cleanse sanitizing jar with disinfectant and wipe it
dry.
2. Place thin layer of sterile cotton at the bottom of jar.
3. Remove implements from wet or dry sanitizer and
place them into the jar, handles up, except for metal
nail files.
4. Fill jar with 70% to 90% alcohol solution to cover
cutting edges and tips of orangewood sticks.
32. After working session, the following
should be done…
• Tools which are made of plastic should be kept clean
and sanitized properly in preparation for the next patron.
• Empty bottles and containers are discarded in a covered
trash bin.
• Used treatment products and other chemicals are
stored, arranged and properly labeled in the cabinet.
• Finger bowls must be sanitized before use of every
client.
33. After working session, the following
should be done…
• The hand and foot spa machines must be
flushed with a solution of about 5% bleach and
circulate the liquid through the system for at
least 10 minutes.
• Leave the solution in the hand and foot spa
machines overnight or at least 5-10 hours before
draining the machines so that they are
thoroughly sanitized.
34. After working session, the following
should be done…
• Table tops and door handles are wiped
with disinfectant and the floor should be
mopped with disinfectant as well.
• Metal tools and instruments must be
sterilized following proper sterilization
techniques. After the process, store in a
dry cabinet until needed.
35. After working session, the following
should be done…
• Tools/Implements which are made of
porous materials such as nail files,
buffers, nail brushes and orangewood
sticks can harbor bacteria easily. Since
they are wood products which cannot be
sterilized, these tools should not be
reused.
36. After working session, the following
should be done…
•Waste materials should be disposed
properly in an enclosed waste bin
fitted with polythene bag.
•Contaminated wastes should be
disposed off as recommended by
local authority.
37. After working session, the following
should be done…
•Any tool or equipment in poor
condition must be repaired
immediately or disposed properly
so as not to pose danger to the
clients as well as the beauticians
38. • Keep in mind that all tools/implements
and equipment should not be used
unless effectively sanitized or sterilized
so as to prevent possible diseases and
that all materials are neatly organized
on the trolley.
39. •Make sure that the client’s safety
and comfort is ensured by using
tools and equipment which are in
good condition and that he/she is
provided with the appropriate
personal protective clothing.
46. CHOOSE YOUR ANSWER FROM THE
BOX
WATER STORE
INSPECT BOLT
ENCLOSED STERILIZE
DISINFECT SANITARY
LAUNDERED DIRECTED
47. SUPPLY AN APPROPRIATE WORD…
•1.__________ metal
implements after every
use to avoid infection
or possible diseases.
48. SUPPLY AN APPROPRIATE WORD…
•2.________ foot
basin after each use
with bleach solution.
49. SUPPLY AN APPROPRIATE WORD…
•3._______ metal
implements once a
month in a pot for 10
minutes.
50. SUPPLY AN APPROPRIATE WORD…
•4.________sterilized metal
instruments in an airtight,
zipper-sealed bag to keep
them from being exposed to
dirt and bacteria.
51. SUPPLY AN APPROPRIATE WORD…
•5.________tools and
equipment regularly
to identify defective
ones.
52. SUPPLY AN APPROPRIATE WORD…
•6.All beauty salon must be
well-lighted and ventilated
and must be in good
_____ condition.
53. SUPPLY AN APPROPRIATE WORD…
•7.Salon establishments
must be provided with
continuous running hot
and cold ________.
54. SUPPLY AN APPROPRIATE WORD…
•8.All waste materials
should be disposed of in
an _______ waste bin
filled with polythene bin
liner.
55. SUPPLY AN APPROPRIATE WORD…
•9.Each client must be
provided with a freshly
_______ towel.