This document discusses inter-VLAN routing and layer 3 switching. It describes the different options for enabling inter-VLAN routing including legacy routing, router-on-a-stick, and layer 3 switching. It provides instructions for configuring each method and troubleshooting common issues like incorrect switch port configurations, IP addressing errors, and VLAN mismatches. Layer 3 switching allows high-performance switches to perform routing internally at wire speed.
1) Configure a router to route between multiple directly connected networks
2) Describe the primary functions and features of a router.
3) Explain how routers use information in data packets to make forwarding decisions in a small- to medium-sized business network.
4) Explain the encapsulation and de-encapsulation process used by routers when switching packets between interfaces.
5) Compare ways in which a router builds a routing table when operating in a small- to medium-sized business network.
6) Explain routing table entries for directly connected networks.
7) Explain how a router builds a routing table of directly connected networks.
8) Explain how a router builds a routing table using static routes.
9) Explain how a router builds a routing table using a dynamic routing protocol.
A
PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
1) Describe the three primary options for enabling inter-VLAN routing.
2) Configure legacy inter-VLAN routing.
3) Configure router-on-a-stick inter-VLAN routing.
4) Troubleshoot common inter-VLAN configuration issues.
5) Troubleshoot common IP addressing issues in an inter-VLAN-routed environment.
6) Configure inter-VLAN routing using Layer 3 switching.
7) Troubleshoot inter-VLAN routing in a Layer 3-switched environment.
1) Configure a router to route between multiple directly connected networks
2) Describe the primary functions and features of a router.
3) Explain how routers use information in data packets to make forwarding decisions in a small- to medium-sized business network.
4) Explain the encapsulation and de-encapsulation process used by routers when switching packets between interfaces.
5) Compare ways in which a router builds a routing table when operating in a small- to medium-sized business network.
6) Explain routing table entries for directly connected networks.
7) Explain how a router builds a routing table of directly connected networks.
8) Explain how a router builds a routing table using static routes.
9) Explain how a router builds a routing table using a dynamic routing protocol.
A
PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
1) Describe the three primary options for enabling inter-VLAN routing.
2) Configure legacy inter-VLAN routing.
3) Configure router-on-a-stick inter-VLAN routing.
4) Troubleshoot common inter-VLAN configuration issues.
5) Troubleshoot common IP addressing issues in an inter-VLAN-routed environment.
6) Configure inter-VLAN routing using Layer 3 switching.
7) Troubleshoot inter-VLAN routing in a Layer 3-switched environment.
Explain the purpose of VLANs in a switched network.
1) Analyze how a switch forwards frames based on VLAN configuration in a multi-switched environment.
2) Configure a switch port to be assigned to a VLAN based on requirements.
3) Configure a trunk port on a LAN switch.
4) Configure Dynamic Trunk Protocol (DTP).
5) Troubleshoot VLAN and trunk configurations in a switched network.
6) Configure security features to mitigate attacks in a VLAN-segmented environment.
7) Explain security best practices for a VLAN-segmented environment.
Chapter 3: Objectives
---------------------------------------------------
Explain the purpose of VLANs in a switched network.
Analyze how a switch forwards frames based on VLAN configuration in a multi-switched environment.
Configure a switch port to be assigned to a VLAN based on requirements.
Configure a trunk port on a LAN switch.
Configure Dynamic Trunk Protocol (DTP).
Troubleshoot VLAN and trunk configurations in a switched network.
Configure security features to mitigate attacks in a VLAN-segmented environment.
Explain security best practices for a VLAN-segmented environment.
Yaser Rahmati | یاسر رحمتی
Rahmati Academy | آکادمی رحمتی
www.yaser-rahmati.ir
www.rahmati-academy.ir
Chapter 4: Objectives
-------------------------------------------------
Configure a router to route between multiple directly connected networks
Describe the primary functions and features of a router.
Explain how routers use information in data packets to make forwarding decisions in a small- to medium-sized business network.
Explain the encapsulation and de-encapsulation process used by routers when switching packets between interfaces.
Compare ways in which a router builds a routing table when operating in a small- to medium-sized business network.
Explain routing table entries for directly connected networks.
Explain how a router builds a routing table of directly connected networks.
Yaser Rahmati | یاسر رحمتی
Rahmati Academy | آکادمی رحمتی
www.yaser-rahmati.ir
www.rahmati-academy.ir