This document provides instructions for completing several creative plates and outputs related to art and illustration techniques. It includes directions for plates on tint, shade and tone (Plate 16); painting techniques (Plate 17); penciling and inking techniques using brushes or pens (Plates 18 and 19); and coloring inked works (Plate 20). It also provides guidelines for two creative outputs - an original art illustration (Output 3) and a 3-panel comic strip (Output 4)."
I have tried to explain the elementary fundamentals of drawing like shapes, forms, shading, perspective drawing etc.
This training material was prepared for my team consisting primarily of Graphic Designers with the objective that they'd start approaching their work like artists.
There are plenty of exercises at the end of each section as well... hope you enjoy it!
I have tried to explain the elementary fundamentals of drawing like shapes, forms, shading, perspective drawing etc.
This training material was prepared for my team consisting primarily of Graphic Designers with the objective that they'd start approaching their work like artists.
There are plenty of exercises at the end of each section as well... hope you enjoy it!
AS 90019 involves recording information from subject matter to demonstrate basic drawing and compositional conventions, and control of wet and dry media in recording information.
Paper Craft Planet and Stampendous team up to bring you this weekly series on the Basics of Rubber Stamping.
This is lesson #5 -- embossing and painting with powder techniques
Similar to Cci1 lec 6 painting techniques and art illustration (20)
Entrepreneurship Lesson 1 Introduction to Entrepreneurship Pinoy StyleWilfred Dexter Tanedo
Introduction to the Filipino Entrepreneurship Definition and Importance of Entrepreneurship, Filipino Values and how it makes or breaks us as an entrepreneur the Creative Industry and the Entrepreneur
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Cci1 lec 6 painting techniques and art illustration
1. PLATE 16: TINT, SHADES AND TONE
PLATE 17: CHART OF PAINTING
TECHNIQUES
PLATE 18: PENCILING AND INKING A
PLATE 19: PENCILING AND INKING B
PLATE 20: COLORING AN INKED
WORK
CREATIVE OUTPUT 3: ART
ILLUSTRATION
CREATIVE OUTPUT 4: 3-PANEL COMIC
BOOK
CREATIVE INDUSTRY I:
MIDTERM PLATES
CREATIVE OUTPUTS 3 AND 4
2. PLATE 16: TINT, SHADE AND TONE
Painting coloring techniques that adds VALUE to a particular HUE. We add white to create
TINT, we add black to create SHADE and we add grey to TONE. The colors: White, Black and
Grey are called Neutral Colors
Materials: Primary and Neutral Acrylic Paint Colors, Brush, Mixing Plate, Water Holder, Flat Brush,
HB Pencil, Eraser, Ruler
Orientation: Landscape
Note: If you don’t have a ready made gray, mix equal parts of white
Procedure:
Do the standard margin and labelling system
Divide the working space based on what is given on the next slide.
On the 3 big spaces label as Tint (white), Shade (black) and Tone (Gray)
On the 3 smaller spaces that measure 2 in x .80 in on each big space; divide into 5 segments
measuring 2 in each.
Follow the system of adding tint, shade and tone on each segment.
4. Plate no. 17: Chart of Painting Techniques
There are many techniques in painting, however these three Basic Techniques are the most common and applicable to
watercolor, acrylic and oil medium. They are Wet on Dry, Dry on Dry and Wet on Wet.
Materials: Acrylic Paint, Flat, Top Round and Pointed Brushes, Water, HB Pencil, Ruler and Eraser
Procedure:
Create the proper margin system for a landscape orientation plate.
Divide the area into 3 columns measuring 3.6 in x 7.5 in by drawing a line; on the lower area, create a line with a measurement of
0.50 in
On the 0.50 in space below, label each column into the following: 1st Column WET ON DRY, 2nd Column will be Dry on Dry and
3rd Column Wet on Wet
Lightly sketch the subject for each painting and follow the technique for each column.
Note: Wet on Dry has a near balance of water on brush and pigment on the paper; You may change the color
but the pattern of design must be the same
Dry on Dry uses little to no water on the acrylic paint on paper thus giving a more rough texture; Paint the
background first with one solid color and let dry; Sketch and paint the tree on the panel with no water at all to
create texture, use the top round and flat brushes to achieve the rough look
Wet on Wet uses a lot of water on brush and little pigment to create a more diffused
tonal coloration on paper this will give a more smooth and aerial look. Lightly wet your paper with water and
using either your pointed or top round brushes that are loaded with water and little pigment create splotches of color
within the area. Be careful not to wet the paper too much as the paper we are using is not capable at holding too much
liquid and may rip. Just make sure you get the intended effect
5. Wet on Dry Dry on Dry Wet on Wet
3.6 in
7.0 in
0.50 in
PLATE NO. 17: Chart of Painting Techniques SCORE:
Materials: Acrylic Paint, Flat, Top Round and Pointed Brushes, Water, HB Pencil, Ruler and Eraser DATE SUBMITTED:
6. PLATE 18 A Pencil and Ink A Using Brush
PLATE 19 B Pencil and Ink B Using Tech Pens
The inker (sometimes credited as the finisher or embellisher or tracer) is one of the two line artists in traditional
comic book production. The penciller creates the initial drawing or sketch. Using a pen or a brush, the inker adds
depth and shading to give the image more definition.
Orientation: Portrait
Plate 18 Materials: Tracing Paper 82 gsm, Pencil, Eraser, Ruler, Masking Tape, Black Acrylic Paint,
Pointer Brushes, Water and water container, mixing plate
Plate 19 Materials: Tracing Paper 82 gsm, Pencil, Eraser, Ruler, Different Tech pen and Black
Marker, Scratch paper
Procedure:
1) Margin according to our portrait oriented plate.
2) Follow the steps in drawing Robin with the correct measurements using pencils. Erase all guide lines and unnecessary
lines or dirt in your pencil work
3) Cut the tracing paper in accordance to the size of your working area (8 x 10.5 in) before taping it on top of plate.
4) Depending on what plate your are working on, trace the lines of that you made with your drawing on the tracing paper.
Rule of the thumb: Play with the Quality of Lines (Thick and Thin)
5) Do not color your work. Just present a black and white output.
* For Plate 19 put a scratch paper below the tracing paper when you apply the black ink from the black marker
7. Follow the steps in drawing Robin but consider the following measurements:
Head to Toe is 10 inches (head size is 5.5 in with hair and body 4.5 in)
Cape from one tip to the other is 7 inches
8. Effective Inking Tips
• A clean ang clear outline of your
pencil will go a long long way in
inking.
• Do not shade the black areas (hair and
mask) with your pencil, just mark them
with an “X” indicating when you ink
them they will need to be painted
black.
• Always play with the quality of lines.
This is where the brush has an
advantage than a technical pen.
However, technical pen is more
forgiving in inking than brushes.
• In advance inking, there are strokes
that can be added for lines but this will
not be used for these plates
Follow the steps in drawing Robin but consider the following measurements:
Head to Toe is 10 inches (head size is 5.5 in with hair and body 4.5 in)
Body width without a hands is set at 3 inches; with arms 1.5 in
Cape from one tip to the other is 7 inches
9. Plate 20: Coloring an Inked Work
color renditions of inked worked usually uses water base mediums or highlighter pens. But a few years back in
the late 90s and early 2000s, computers have been used in color rendering after the inked work is scanned.
Recent years, all work from line art, to detailing and coloring are done in computer.
Orientation: Portrait
Materials: Photocopy of Robin, Acrylic Paints,
Brush, Water and Water container and glue
Procedure:
Margin your plate in portrait orientation
Photocopy your inked work on either Plate 18
or 19 and cut perfectly on your working area
Using your acrylic painst follow the color
scheme of Robin from the based art.
10. CREATIVE OUTPUTS
ART ILLUSTRATIONS
CREATIVE OUTPUT 3 ART ILLUSTRATION
Landscape or Portrait Orientation
Create an original artwork that will
combine pencil, brush black inking and
color; Use the proper margin system
based on your chosen orientation
Indicate your materials accordingly in the
details below your artwork together with
the Creative Output Number and Title,
Score and Date Submitted.
CREATIVE OUTPUT 4 3-PANEL COMIC STRIP
Landscape Orientation
Create a 3 panel comic strip; Each panel box
must measure 3 x 3 inches with a space of 0.5
in between two boxes.
Do a 3 sequence of a Knock Knock Joke or Hugot
Line or Pick – Up Line
Use only your technical pens in inking your work.
Note: Paint your work first before inking it with
your tech pens so as to avoid smudging of ink.
Indicate your materials accordingly in the details
below your artwork together with the Creative
Output Number and Title, Score and Date
Submitted
11. Sample Art Works for Art Illustration
Art Nouveau Louis Théophile Hingre Superman by Adam Hughes The Endless by Jill Thompson
12. Sample Art Work for 3-Panel Comic Strip
Source: http://ww2.onvacations.co/anesthesia-jokes-cartoons/