Bs 4027-1996
•
1 like•573 views
The document outlines British Standard BS 4027:1996, which specifies requirements and test methods for common cements. It includes sections on scope, references, definitions, constituents, composition, strength, physical and chemical properties, marking, sampling, testing, and annexes with tables on conformity criteria, compositional requirements, and product guidance.
Report
Share
Report
Share
Download to read offline
Recommended
070002179.PDF
This document contains measurements and notes for a repair bracket made of low carbon steel. It lists various dimensional measurements ranging from 1.00 to 4.07 inches. Notes specify the material as 7 gauge commercial quality low carbon steel with a black oxide finish and that burrs should be removed. Revision and approval information is provided at the bottom.
Rohm SiC MOSFET Gen3 Trench Design Family
Trench technology in Rohm 650V and 1200V SiC MOSFETs.
More information on that report at: http://www.systemplus.fr/reverse-costing-reports/rohm-sic-mosfet-gen3-trench-design-family/
(Company profile)ykt pcb manufacturer_in_korea_2019_1st_half
Now, the U.S. and China traded war is getting worse and worse.
It is time to re-consider your PCB supply chain in order to overcome the unforeseeable global trading circumstance.
If you are looking for a reliable PCB manufacturer in Korea, we guarantee that we can be your alternative option for your Business Continuity Management Plan.
If you are interested in purchasing PCB from Korea, please do't hesitate to contact me.
Quality assurance plan
This document outlines a quality assurance plan for pre-engineered steel buildings and steel structures. It specifies inspection requirements for raw materials, fabrication processes, welding, surface cleaning and painting. Raw materials like steel plates, bolts, doors and windows will be verified against specifications. Fabrication like member dimensions and identification will be inspected. Welding procedures, welder qualifications and welding inspections will follow codes like AWS D1.1. Surface preparation and coating thickness will be checked daily. Final inspection will verify dimensions and surfaces before painting according to drawings and standards. Inspection results will be documented in reports.
CBCODE.pdf
This document provides the Indian Railway Standard Code of Practice for Plain, Reinforced and Prestressed Concrete for General Bridge Construction (Concrete Bridge Code). It summarizes the history and revisions of the code. The code was first adopted in 1936 and revised in 1962 and 1997. The 1997 revision incorporated limit state design methodology and brought the code in line with international standards. It summarizes the key changes incorporated in the 1997 revision related to limit state design, fatigue criteria, units adopted, symbols used, acceptance criteria for concrete, and supplemental measures for design and durability. The document lists the main codes and standards that were referenced in revising the code.
Bis list of codes
The document provides the Programme of Work for the Civil Engineering Department (CED) of the Bureau of Indian Standards as of 1 April 2012. It lists 35 Sectional Committees under CED covering various topics related to civil engineering. Each committee lists the published Indian Standards and draft standards at different stages of development. The document aims to provide the latest information on standards under development and revision to serve as a reference for further information needs.
Presentation Slides: PHMSA Final Rule (Part 1) for Gas Transmission Pipelines
Presentation Slides: PHMSA Final Rule (Part 1) for Gas Transmission PipelinesAudubon Engineering Company
The new section 192.607 defines requirements for verifying material properties and attributes of onshore steel transmission pipelines. Operators must maintain traceable, verifiable, and complete records for the life of the pipeline. The rule requires developing procedures to verify unverified material information through destructive or non-destructive testing. It also establishes sampling programs for pipelines with incomplete data to test for properties like minimum yield strength. The impacts are moderate, as operators will need to update practices to comply with the new verification and record keeping standards.ASME SEC IX PPT.pdf
The document summarizes the key aspects of ASME Section IX (Ed. 2019), which contains requirements for welding procedure and performance qualifications. It discusses the history and timeline of ASME standards development. It also provides an overview of the various articles within ASME Section IX, including Article I on general welding requirements, Article II on welding procedure qualification, Article III on welding performance qualification, and Article IV on welding data. Key terms like essential variables, P-numbers, F-numbers, and A-numbers used for material grouping are also defined in the document.
Recommended
070002179.PDF
This document contains measurements and notes for a repair bracket made of low carbon steel. It lists various dimensional measurements ranging from 1.00 to 4.07 inches. Notes specify the material as 7 gauge commercial quality low carbon steel with a black oxide finish and that burrs should be removed. Revision and approval information is provided at the bottom.
Rohm SiC MOSFET Gen3 Trench Design Family
Trench technology in Rohm 650V and 1200V SiC MOSFETs.
More information on that report at: http://www.systemplus.fr/reverse-costing-reports/rohm-sic-mosfet-gen3-trench-design-family/
(Company profile)ykt pcb manufacturer_in_korea_2019_1st_half
Now, the U.S. and China traded war is getting worse and worse.
It is time to re-consider your PCB supply chain in order to overcome the unforeseeable global trading circumstance.
If you are looking for a reliable PCB manufacturer in Korea, we guarantee that we can be your alternative option for your Business Continuity Management Plan.
If you are interested in purchasing PCB from Korea, please do't hesitate to contact me.
Quality assurance plan
This document outlines a quality assurance plan for pre-engineered steel buildings and steel structures. It specifies inspection requirements for raw materials, fabrication processes, welding, surface cleaning and painting. Raw materials like steel plates, bolts, doors and windows will be verified against specifications. Fabrication like member dimensions and identification will be inspected. Welding procedures, welder qualifications and welding inspections will follow codes like AWS D1.1. Surface preparation and coating thickness will be checked daily. Final inspection will verify dimensions and surfaces before painting according to drawings and standards. Inspection results will be documented in reports.
CBCODE.pdf
This document provides the Indian Railway Standard Code of Practice for Plain, Reinforced and Prestressed Concrete for General Bridge Construction (Concrete Bridge Code). It summarizes the history and revisions of the code. The code was first adopted in 1936 and revised in 1962 and 1997. The 1997 revision incorporated limit state design methodology and brought the code in line with international standards. It summarizes the key changes incorporated in the 1997 revision related to limit state design, fatigue criteria, units adopted, symbols used, acceptance criteria for concrete, and supplemental measures for design and durability. The document lists the main codes and standards that were referenced in revising the code.
Bis list of codes
The document provides the Programme of Work for the Civil Engineering Department (CED) of the Bureau of Indian Standards as of 1 April 2012. It lists 35 Sectional Committees under CED covering various topics related to civil engineering. Each committee lists the published Indian Standards and draft standards at different stages of development. The document aims to provide the latest information on standards under development and revision to serve as a reference for further information needs.
Presentation Slides: PHMSA Final Rule (Part 1) for Gas Transmission Pipelines
Presentation Slides: PHMSA Final Rule (Part 1) for Gas Transmission PipelinesAudubon Engineering Company
The new section 192.607 defines requirements for verifying material properties and attributes of onshore steel transmission pipelines. Operators must maintain traceable, verifiable, and complete records for the life of the pipeline. The rule requires developing procedures to verify unverified material information through destructive or non-destructive testing. It also establishes sampling programs for pipelines with incomplete data to test for properties like minimum yield strength. The impacts are moderate, as operators will need to update practices to comply with the new verification and record keeping standards.ASME SEC IX PPT.pdf
The document summarizes the key aspects of ASME Section IX (Ed. 2019), which contains requirements for welding procedure and performance qualifications. It discusses the history and timeline of ASME standards development. It also provides an overview of the various articles within ASME Section IX, including Article I on general welding requirements, Article II on welding procedure qualification, Article III on welding performance qualification, and Article IV on welding data. Key terms like essential variables, P-numbers, F-numbers, and A-numbers used for material grouping are also defined in the document.
5288PS1i1
This document provides technical details for Addaset and Addabound resin bound surfacing systems. It includes information on manufacturing, delivery, design considerations, installation and durability. Key factors assessed include the systems' strength and stability under traffic loads, surface characteristics like skid resistance, and ability to drain rainwater to prevent ponding. When used as specified, the systems have a service life exceeding traditional asphalt and require regular cleaning to maintain permeability.
Bs 2594 specification for carbon steel welded horizontal cylindrical storage ...
This document is a British Standard specification for carbon steel welded horizontal cylindrical storage tanks. It provides requirements for design, construction, materials, welding, testing and other aspects of the tanks. The standard includes dimensions and capacities for a range of tank sizes with dished and flanged ends, suitable for both above-ground and underground storage of liquids. It specifies minimum plate thicknesses for shells, ends and compartments. The tanks are intended for static storage of petroleum and chemical products vented to the atmosphere, and can withstand internal pressures up to 0.4 bar and vacuums of 10 mbar.
TES-P-119-19-R1.pdf
This document provides standards and requirements for the design of substation buildings. It outlines equipment layout considerations, including clearances between equipment, and separate rooms for things like batteries, switchgear, and auxiliary equipment. Specific equipment and system requirements are also covered, such as for HVAC, lighting, grounding, and fire safety. The document aims to ensure substation buildings are properly designed to safely house electrical equipment while providing adequate maintenance access.
14 fundamentals vip
The document contains a practice exam for the CWI Fundamentals exam with 45 multiple choice questions covering topics like welding processes, inspection methods, documentation requirements, and material properties. It tests knowledge of welding, brazing, cutting and inspection fundamentals needed for CWI certification.
5288PS2i1
The document is a technical approval certificate from the British Board of Agrément for the Terrabound resin bound aggregate surfacing system. It provides details on the product's certification, key factors assessed including strength and stability, surface characteristics, rainwater drainage and durability. It also addresses use, practicability of installation and resistance to permanent deformation. The certificate indicates the system is suitable for use in domestic driveways, patios and lightly trafficked areas when installed and maintained as specified.
CORE KNOWLEGDE for CIVIL INSPECTORS.pdf
The document provides technical skills and knowledge requirements for civil inspection engineers. It includes descriptions of international standards and Saudi Aramco standards relevant to various civil materials and inspection. Requirements are outlined for inspecting fill materials, aggregates, concrete, asphalt, masonry materials, steel structures, and reviewing associated test reports to ensure standards compliance.
PSI-130-30-0002-RC-R1_Agitators.pdf
This document is a material requisition for slurry storage tank agitators for a bauxite pipeline project in Paragominas, Brazil. It includes 6 agitators to be provided - 4 for mine site storage tanks and 2 for terminal site tanks. The scope of work includes design, fabrication, testing and delivery of the agitators. Drawings, manuals and other documentation are required to be submitted. Quality surveillance of the agitator manufacturing is also specified, requiring the supplier to allow access to their facilities for inspection. Technical specifications for aspects like painting, gearboxes and instruments are referenced.
AA Nace PPT.pdf
The document discusses corrosion mechanisms such as SSC, SCC, and HIC that can occur in wet H2S environments. It describes NACE standards for materials selection for resistance to these corrosion mechanisms, including MR0175/ISO15156 which provides guidelines for selecting cracking-resistant materials like steels, alloys, and cast irons. The standard has three parts that specify requirements for different material types and qualification methods through laboratory testing and field experience evaluation.
Saes a-206-pmi
This document provides requirements for positive material identification (PMI) of pressure-retaining alloy components and welds to ensure the correct materials are supplied and installed. Key points:
- PMI testing is required for all alloy materials and welds to verify the chemical composition matches specifications.
- Exceptions include some carbon steel components, non-pressure items, small tubes/bolting with additional controls.
- Testing methods include X-ray fluorescence analysis to quantify major alloying elements in materials and welds.
- Responsibilities are defined for project management, plant operations, manufacturers, fabricators and inspectors to implement PMI programs and procedures.
IS 383-2016.pdf
This document outlines revisions made to Indian Standard 383 from 2016 regarding specifications for coarse and fine aggregates used in concrete. Some key changes include expanding the scope to include aggregates from non-natural sources, rationalizing definitions, including limits for mica as a deleterious material, specifying requirements for shape characteristics, and provisions for addressing alkali aggregate reactivity. The revisions also provide quality requirements and utilization limits for aggregates produced from waste materials to address shortages of natural aggregates in some areas.
Quality Assurance in PEB - Pre Engineered steel buildings
Quality is main aspect in Pre engineered steel buildings. it is applicable to each and every parameter of PEB design. while manufacturing a PEB , it is essential to maintain QAP. for more details visit http://www.mbphenix.com
Pontofocal-textos-regulamentos-chn 785-suppl_1
This document provides the national standard of the People's Republic of China for pressure vessels - Part 4: Fabrication, inspection and testing, and acceptance. It replaces some sections of the 1998 standard and includes additional requirements. The document outlines the scope, references, terms, general provisions, material testing and segmentation requirements, fabrication processes, welding, heat treatment, testing, and acceptance criteria for pressure vessels. It aims to standardize the manufacturing, inspection, and acceptance of pressure vessels in China.
2 appendix ii technical conditions, requirements and ma (1)
This document provides technical specifications for the supply of glass reinforced pipe (GRV) materials for water wells in Libya. It outlines requirements for GRV well casing, screens, and components. The materials must be designed to last 50 years under Libyan environmental conditions, including a range of water qualities. The document specifies applicable standards from organizations like the American Petroleum Institute and American Society for Testing and Materials. It also provides design requirements, considering factors like loads, degradation over time, service environments, and installation.
PHMSA Final Rule (part 1) for Gas Transmission Pipelines
The document summarizes key aspects of PHMSA's final rule for gas transmission pipelines, including:
- Several new definitions are added around engineering critical assessments and moderate consequence areas.
- Requirements are added around material records retention, pipe design records, and component records that must now be kept for the life of the pipeline.
- MAOP establishment and reconfirmation has new requirements, including increasing the Class 1 safety factor from 1.1 to 1.25 and developing procedures to reconfirm MAOP for pipelines lacking complete records or in high consequence areas. Pipelines must complete 50% of reconfirmations by 2028 and 100% by 2035.
303.1 97 standard specification for-cast-in-place architec
This document provides an overview and requirements for ACI 303.1-97, the standard specification for cast-in-place architectural concrete. It includes definitions of key terms, lists reference organizations and standards, and outlines the general scope and content of the specification which covers materials, forming, placement, curing, treatments and inspection of architectural concrete. The document also provides notes and instructions to architects and engineers for selecting options and requirements for specific projects when using ACI 303.1-97 as a reference standard in project specifications.
Saes q-012
This document provides criteria for the design, materials, fabrication, delivery, erection, inspection, and testing of precast and prestressed concrete structures for Saudi Aramco. It references various Saudi Aramco engineering standards and specifications as well as industry codes and standards. The document covers topics such as structural design requirements, materials specifications, connection design, tolerances, embedments, fire resistance, and more. It aims to ensure precast concrete structures are designed and constructed safely and reliably for Saudi Aramco's applications.
ME REVIEWER
The document appears to be a set of questions for a licensing exam on construction project management. It includes questions on topics like construction contracts, project scheduling, specifications for construction materials and methods, quality control testing procedures, and roles of people involved in construction projects.
Is 1343 2012
This document is the Indian Standard for prestressed concrete code of practice. It provides revisions to the code to align with changes in IS 456 for reinforced concrete and updated practices. Key changes include allowing higher strength concrete up to M80, revising durability requirements to limit maximum cement content, and updating provisions for materials, workmanship, and structural design based on the limit state method. The code is intended to guide qualified engineers in the design of prestressed concrete structures.
RESUME MAHESH M RAVAL
This resume summarizes Mahesh Raval's qualifications and experience. He has 18 years of experience as a Mechanical Engineer with NDT Level II certifications. His current role is Manager of Quality Management at Reliance Industries where he is responsible for quality inspection, auditing, and materials testing on various expansion projects. Previously, he held quality roles at Remi Metals and Fivebros Forgings where he performed inspections, audits, testing and ensured compliance with ISO and other standards.
Saes h-001 - 2016
This document provides requirements for the selection and application of protective coatings for industrial plants and equipment. It covers scope, conflicts and deviations, references, definitions, health and safety, general requirements, coating material selection, surface preparation, coating application, inspection and testing, and approved coating systems. The document is intended to establish minimum mandatory requirements for new and existing onshore industrial facilities to properly select and apply coatings for corrosion protection.
Using fly ash as replacement of cement & aggregate
This document presents a thesis study on utilizing fly ash as a partial replacement for cement and fine aggregates in concrete. The study was conducted by Mohamad Rkein under the supervision of Professor Sabaratnam Prathapan and Associate Professor Krishnan Kannoorpatti. The study aims to determine the feasibility and effects on mechanical properties of using fly ash to replace cement and fine aggregates in concrete mixtures. Tests were conducted on workability and compressive strength of concrete with varying replacement levels of fly ash at 7, 28, and 56 days. The results indicate that fly ash can effectively be used as a partial replacement material in concrete and may provide benefits to strength properties and reduce environmental impacts.
Toward green concrete for better sustainable environment
This document discusses efforts to develop green concrete as a more sustainable building material. It begins by noting that cement production currently accounts for 8-10% of global CO2 emissions. The document then discusses various approaches researchers have taken to reduce the environmental impacts of concrete, including substituting fly ash for cement, using recycled materials, and nanoengineering cement mixtures to improve performance. It emphasizes that green concrete must use waste materials, have a sustainable production process, and perform well over its lifetime. The document surveys cleaner cement production technologies and argues green concrete can help all three pillars of sustainability.
More Related Content
Similar to Bs 4027-1996
5288PS1i1
This document provides technical details for Addaset and Addabound resin bound surfacing systems. It includes information on manufacturing, delivery, design considerations, installation and durability. Key factors assessed include the systems' strength and stability under traffic loads, surface characteristics like skid resistance, and ability to drain rainwater to prevent ponding. When used as specified, the systems have a service life exceeding traditional asphalt and require regular cleaning to maintain permeability.
Bs 2594 specification for carbon steel welded horizontal cylindrical storage ...
This document is a British Standard specification for carbon steel welded horizontal cylindrical storage tanks. It provides requirements for design, construction, materials, welding, testing and other aspects of the tanks. The standard includes dimensions and capacities for a range of tank sizes with dished and flanged ends, suitable for both above-ground and underground storage of liquids. It specifies minimum plate thicknesses for shells, ends and compartments. The tanks are intended for static storage of petroleum and chemical products vented to the atmosphere, and can withstand internal pressures up to 0.4 bar and vacuums of 10 mbar.
TES-P-119-19-R1.pdf
This document provides standards and requirements for the design of substation buildings. It outlines equipment layout considerations, including clearances between equipment, and separate rooms for things like batteries, switchgear, and auxiliary equipment. Specific equipment and system requirements are also covered, such as for HVAC, lighting, grounding, and fire safety. The document aims to ensure substation buildings are properly designed to safely house electrical equipment while providing adequate maintenance access.
14 fundamentals vip
The document contains a practice exam for the CWI Fundamentals exam with 45 multiple choice questions covering topics like welding processes, inspection methods, documentation requirements, and material properties. It tests knowledge of welding, brazing, cutting and inspection fundamentals needed for CWI certification.
5288PS2i1
The document is a technical approval certificate from the British Board of Agrément for the Terrabound resin bound aggregate surfacing system. It provides details on the product's certification, key factors assessed including strength and stability, surface characteristics, rainwater drainage and durability. It also addresses use, practicability of installation and resistance to permanent deformation. The certificate indicates the system is suitable for use in domestic driveways, patios and lightly trafficked areas when installed and maintained as specified.
CORE KNOWLEGDE for CIVIL INSPECTORS.pdf
The document provides technical skills and knowledge requirements for civil inspection engineers. It includes descriptions of international standards and Saudi Aramco standards relevant to various civil materials and inspection. Requirements are outlined for inspecting fill materials, aggregates, concrete, asphalt, masonry materials, steel structures, and reviewing associated test reports to ensure standards compliance.
PSI-130-30-0002-RC-R1_Agitators.pdf
This document is a material requisition for slurry storage tank agitators for a bauxite pipeline project in Paragominas, Brazil. It includes 6 agitators to be provided - 4 for mine site storage tanks and 2 for terminal site tanks. The scope of work includes design, fabrication, testing and delivery of the agitators. Drawings, manuals and other documentation are required to be submitted. Quality surveillance of the agitator manufacturing is also specified, requiring the supplier to allow access to their facilities for inspection. Technical specifications for aspects like painting, gearboxes and instruments are referenced.
AA Nace PPT.pdf
The document discusses corrosion mechanisms such as SSC, SCC, and HIC that can occur in wet H2S environments. It describes NACE standards for materials selection for resistance to these corrosion mechanisms, including MR0175/ISO15156 which provides guidelines for selecting cracking-resistant materials like steels, alloys, and cast irons. The standard has three parts that specify requirements for different material types and qualification methods through laboratory testing and field experience evaluation.
Saes a-206-pmi
This document provides requirements for positive material identification (PMI) of pressure-retaining alloy components and welds to ensure the correct materials are supplied and installed. Key points:
- PMI testing is required for all alloy materials and welds to verify the chemical composition matches specifications.
- Exceptions include some carbon steel components, non-pressure items, small tubes/bolting with additional controls.
- Testing methods include X-ray fluorescence analysis to quantify major alloying elements in materials and welds.
- Responsibilities are defined for project management, plant operations, manufacturers, fabricators and inspectors to implement PMI programs and procedures.
IS 383-2016.pdf
This document outlines revisions made to Indian Standard 383 from 2016 regarding specifications for coarse and fine aggregates used in concrete. Some key changes include expanding the scope to include aggregates from non-natural sources, rationalizing definitions, including limits for mica as a deleterious material, specifying requirements for shape characteristics, and provisions for addressing alkali aggregate reactivity. The revisions also provide quality requirements and utilization limits for aggregates produced from waste materials to address shortages of natural aggregates in some areas.
Quality Assurance in PEB - Pre Engineered steel buildings
Quality is main aspect in Pre engineered steel buildings. it is applicable to each and every parameter of PEB design. while manufacturing a PEB , it is essential to maintain QAP. for more details visit http://www.mbphenix.com
Pontofocal-textos-regulamentos-chn 785-suppl_1
This document provides the national standard of the People's Republic of China for pressure vessels - Part 4: Fabrication, inspection and testing, and acceptance. It replaces some sections of the 1998 standard and includes additional requirements. The document outlines the scope, references, terms, general provisions, material testing and segmentation requirements, fabrication processes, welding, heat treatment, testing, and acceptance criteria for pressure vessels. It aims to standardize the manufacturing, inspection, and acceptance of pressure vessels in China.
2 appendix ii technical conditions, requirements and ma (1)
This document provides technical specifications for the supply of glass reinforced pipe (GRV) materials for water wells in Libya. It outlines requirements for GRV well casing, screens, and components. The materials must be designed to last 50 years under Libyan environmental conditions, including a range of water qualities. The document specifies applicable standards from organizations like the American Petroleum Institute and American Society for Testing and Materials. It also provides design requirements, considering factors like loads, degradation over time, service environments, and installation.
PHMSA Final Rule (part 1) for Gas Transmission Pipelines
The document summarizes key aspects of PHMSA's final rule for gas transmission pipelines, including:
- Several new definitions are added around engineering critical assessments and moderate consequence areas.
- Requirements are added around material records retention, pipe design records, and component records that must now be kept for the life of the pipeline.
- MAOP establishment and reconfirmation has new requirements, including increasing the Class 1 safety factor from 1.1 to 1.25 and developing procedures to reconfirm MAOP for pipelines lacking complete records or in high consequence areas. Pipelines must complete 50% of reconfirmations by 2028 and 100% by 2035.
303.1 97 standard specification for-cast-in-place architec
This document provides an overview and requirements for ACI 303.1-97, the standard specification for cast-in-place architectural concrete. It includes definitions of key terms, lists reference organizations and standards, and outlines the general scope and content of the specification which covers materials, forming, placement, curing, treatments and inspection of architectural concrete. The document also provides notes and instructions to architects and engineers for selecting options and requirements for specific projects when using ACI 303.1-97 as a reference standard in project specifications.
Saes q-012
This document provides criteria for the design, materials, fabrication, delivery, erection, inspection, and testing of precast and prestressed concrete structures for Saudi Aramco. It references various Saudi Aramco engineering standards and specifications as well as industry codes and standards. The document covers topics such as structural design requirements, materials specifications, connection design, tolerances, embedments, fire resistance, and more. It aims to ensure precast concrete structures are designed and constructed safely and reliably for Saudi Aramco's applications.
ME REVIEWER
The document appears to be a set of questions for a licensing exam on construction project management. It includes questions on topics like construction contracts, project scheduling, specifications for construction materials and methods, quality control testing procedures, and roles of people involved in construction projects.
Is 1343 2012
This document is the Indian Standard for prestressed concrete code of practice. It provides revisions to the code to align with changes in IS 456 for reinforced concrete and updated practices. Key changes include allowing higher strength concrete up to M80, revising durability requirements to limit maximum cement content, and updating provisions for materials, workmanship, and structural design based on the limit state method. The code is intended to guide qualified engineers in the design of prestressed concrete structures.
RESUME MAHESH M RAVAL
This resume summarizes Mahesh Raval's qualifications and experience. He has 18 years of experience as a Mechanical Engineer with NDT Level II certifications. His current role is Manager of Quality Management at Reliance Industries where he is responsible for quality inspection, auditing, and materials testing on various expansion projects. Previously, he held quality roles at Remi Metals and Fivebros Forgings where he performed inspections, audits, testing and ensured compliance with ISO and other standards.
Saes h-001 - 2016
This document provides requirements for the selection and application of protective coatings for industrial plants and equipment. It covers scope, conflicts and deviations, references, definitions, health and safety, general requirements, coating material selection, surface preparation, coating application, inspection and testing, and approved coating systems. The document is intended to establish minimum mandatory requirements for new and existing onshore industrial facilities to properly select and apply coatings for corrosion protection.
Similar to Bs 4027-1996 (20)
Bs 2594 specification for carbon steel welded horizontal cylindrical storage ...
Bs 2594 specification for carbon steel welded horizontal cylindrical storage ...
Quality Assurance in PEB - Pre Engineered steel buildings
Quality Assurance in PEB - Pre Engineered steel buildings
2 appendix ii technical conditions, requirements and ma (1)
2 appendix ii technical conditions, requirements and ma (1)
PHMSA Final Rule (part 1) for Gas Transmission Pipelines
PHMSA Final Rule (part 1) for Gas Transmission Pipelines
303.1 97 standard specification for-cast-in-place architec
303.1 97 standard specification for-cast-in-place architec
More from hsaam hsaam
Using fly ash as replacement of cement & aggregate
This document presents a thesis study on utilizing fly ash as a partial replacement for cement and fine aggregates in concrete. The study was conducted by Mohamad Rkein under the supervision of Professor Sabaratnam Prathapan and Associate Professor Krishnan Kannoorpatti. The study aims to determine the feasibility and effects on mechanical properties of using fly ash to replace cement and fine aggregates in concrete mixtures. Tests were conducted on workability and compressive strength of concrete with varying replacement levels of fly ash at 7, 28, and 56 days. The results indicate that fly ash can effectively be used as a partial replacement material in concrete and may provide benefits to strength properties and reduce environmental impacts.
Toward green concrete for better sustainable environment
This document discusses efforts to develop green concrete as a more sustainable building material. It begins by noting that cement production currently accounts for 8-10% of global CO2 emissions. The document then discusses various approaches researchers have taken to reduce the environmental impacts of concrete, including substituting fly ash for cement, using recycled materials, and nanoengineering cement mixtures to improve performance. It emphasizes that green concrete must use waste materials, have a sustainable production process, and perform well over its lifetime. The document surveys cleaner cement production technologies and argues green concrete can help all three pillars of sustainability.
Green concrete in jordan
The document discusses sustainable design. It states that sustainable design uses green building techniques for materials, energy systems, and construction. Sustainably designed buildings are usually passively cooled and heated, requiring less energy usage. They also minimize impacts on land and resources while meeting present and future needs. The goals of sustainable design are to satisfy current needs without compromising future generations financially, environmentally, and socially.
Final report-cesticcreports fly-ash_pervious_concrete-05202016
This document is a report on a study that developed and tested a graphene oxide-modified pervious concrete using fly ash as the sole binder. The concrete was tested against control groups to evaluate its density, void ratio, mechanical strength, infiltration rate, freeze-thaw durability, and resistance to degradation. Test results found that the graphene oxide addition increased strength and durability properties while reducing void ratio and infiltration rate compared to fly ash concrete. However, further durability testing is needed on the fly ash concrete at later ages due to its slow hydration. The report provides background on pervious concrete and fly ash properties.
Experimental investigation of rap modified asphalt binder and crushed rap ag...
This document presents an experimental investigation of reclaimed asphalt pavement (RAP) modified asphalt binder and crushed RAP aggregates. The study evaluates the physical properties of asphalt binder mixed with RAP at various proportions (10-50%) and tests the effect on properties like penetration, softening point, ductility and specific gravity. Aggregate tests like Los Angeles abrasion, crushing, shape and impact value are also conducted on crushed RAP aggregates. The results of mixing RAP with virgin binder and using crushed aggregates are discussed to analyze the recycling of RAP materials and minimize waste disposal.
Evaluation of green concrete types
The document summarizes the evaluation of different types of green concrete being investigated by the Danish Centre for Green Concrete. The center aims to reduce the environmental impact of concrete by developing new technologies. Four ways to produce green concrete are described, including using conventional and industrial residual products and cement with reduced environmental impact. Preliminary results show the green concrete types can achieve similar mechanical properties and durability as conventional concrete. A life cycle screening of a bridge found that three green concrete column designs reduced CO2 emissions by 30% or more compared to a reference design, fulfilling the center's environmental goals.
Effect of coconut fibre in concrete and to improve the
This document discusses the use of coconut fibre in concrete. Coconut fibre is extracted from the outer shell of coconuts and is one of the most ductile and tough natural fibres. It has high tensile strength and is capable of withstanding strains 4-6 times more than other natural fibres. The objective of the study is to enhance the strength properties of concrete by adding coconut fibre. Different tests will be conducted on fresh and hardened concrete with coconut fibre added at various percentages to determine workability and strength properties. The study will also investigate the effect of incorporating a superplasticizer to improve workability of concrete containing coconut fibre.
Design and properties of sustainable concrete
The document discusses methods for designing and assessing sustainable concrete. It outlines three approaches: (1) optimizing the concrete mix to reduce environmental impact while maintaining performance and lifetime; (2) improving concrete performance at equal environmental impact and lifetime; and (3) optimizing the structure's lifetime at equal environmental impact and performance. The document then summarizes methods for evaluating a concrete's environmental impact using life cycle assessments. It notes that cement has a large influence on impact and that replacing it can reduce impact if replacements are industrial byproducts. The document concludes by presenting mix design principles for "green concretes" with reduced cement content through optimization and additive replacements while maintaining strength and durability.
Concrete from grey to green
Gammon Construction has been a leading construction contractor in Asia for over 50 years. It developed Gammon Green Concrete to reduce the carbon footprint of concrete through formulations that lower cement content and optimize particle packing density. This high-performance concrete has 10% lower carbon emissions, improved durability, and reduces lifetime costs of structures. Gammon also uses technologies like GPS tracking and residue concrete recycling to improve efficiency and sustainability of its concrete operations.
Concrete as a green building material
This document discusses concrete as a green building material. It notes that while concrete is widely used due to its low cost and versatility, its production has significant environmental impacts due to the large amounts of raw materials, energy, and CO2 emissions required. The document summarizes efforts to make concrete more sustainable through the use of cement substitutes like fly ash and slag, and recycled materials as aggregate substitutes. It argues that identifying valuable properties in waste materials can increase their commercial viability as concrete ingredients. The emerging green building movement is also changing economic factors to favor more sustainable resource use.
I.s.en1997 1-2004+a1-2013
This document provides amendments to Eurocode 7: Geotechnical design - Part 1: General rules (EN 1997-1:2004). The amendments include modifications to sections and annexes of the original standard, such as the contents, national annex, definitions, limit state design, soil and groundwater characterization, geotechnical analysis and design situations. The purpose is to clarify provisions and incorporate technical enhancements to Eurocode 7 Part 1.
En 1997
This document provides an overview of Eurocode 7 (EN 1997), which establishes the design rules for geotechnical structures. It summarizes the contents and sections of Parts 1 and 2 of Eurocode 7. Part 1 covers general geotechnical design rules, while Part 2 focuses on ground investigation and testing. The document also discusses some key aspects of Part 1, including the determination of characteristic and design values of geotechnical parameters, approaches to ultimate limit state design, and the treatment of serviceability limit states. Various workshop presentations are then listed that will provide more detailed explanations of sections of Eurocode 7 on topics like foundations, retaining structures, slope stability and embankments.
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete4
testing fresh concrete. self-compacting concrete
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete3
This document provides testing methods for self-compacting concrete using the J-ring test. The J-ring test involves placing fresh concrete into a mold surrounded by a metal ring with gaps. The test determines if the concrete can flow through the gaps under its own weight without segregation or blocking. Passing the J-ring test indicates the concrete is self-compacting.
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete2
testing fresh concrete. self-compacting concrete
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete1
This document provides testing methods for self-compacting concrete using the J-ring test. The J-ring test involves placing fresh concrete into a mold surrounded by a metal ring with gaps. The test determines if the concrete can flow through the gaps under its own weight without segregation or blocking. Passing the J-ring test indicates the concrete is self-compacting.
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete-
testing fresh concrete. self-compacting concrete
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete
This document provides testing methods for self-compacting concrete using the J-ring test. The J-ring test involves placing fresh concrete into a mold surrounded by a metal ring with gaps. The test determines if the concrete can flow through the gaps under its own weight without segregation or blocking. Passing the J-ring test indicates the concrete is self-compacting.
Technical notes in brick construction
This document provides an overview of two national masonry standards:
1) The Building Code Requirements for Masonry Structures (MSJC Code), which provides requirements for designing masonry structures.
2) The Specification for Masonry Structures (MSJC Specification), which establishes requirements for masonry construction.
It discusses the development of these consensus standards and emphasizes revisions made in the 2002 edition, including new provisions for strength design and seismic design of masonry structures. Adoption of the standards provides benefits such as uniform design criteria and quality assurance.
More from hsaam hsaam (20)
Using fly ash as replacement of cement & aggregate
Using fly ash as replacement of cement & aggregate
Toward green concrete for better sustainable environment
Toward green concrete for better sustainable environment
Final report-cesticcreports fly-ash_pervious_concrete-05202016
Final report-cesticcreports fly-ash_pervious_concrete-05202016
Experimental investigation of rap modified asphalt binder and crushed rap ag...
Experimental investigation of rap modified asphalt binder and crushed rap ag...
Effect of coconut fibre in concrete and to improve the
Effect of coconut fibre in concrete and to improve the
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete4
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete4
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete3
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete3
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete2
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete2
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete1
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete1
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete-
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete-
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete
Bs en 12350 12 2010 - testing fresh concrete. self-compacting concrete
Recently uploaded
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Recently uploaded (20)
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Introduction to AI Safety (public presentation).pptx
Introduction to AI Safety (public presentation).pptx
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Bs 4027-1996
- 1. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 2. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 3. - - - BSI BS*q027 9b Lb24bb9 0532350 313 I BS 4027 : 1996 - - Contents Committees responsible Foreword page Inside front cover ii Specification Scope References Definitions Cement Constituents Composition, notation and manufacture Compressive strength Physical properties Chemical properties Marking Information to be provided Sampling and testing for acceptance inspection at delivery Annexes A (informative) Conformity criteria (cement manufacturer's autocontrol) B (informative) Compositional requirements for all cement types C (informative) Product guidance Thbles 1 Compressive strength 2 Chemical properties 3 Acceptance inspection limits A.1 Minimum testing frequencies A.2 Parameters determining the conformity procedure A.3 Major defects A.4 Acceptability constant k~ A.5 Acceptable number of defects CA B.1 Extreme compositional possibilities List of references Inside back cover
- 4. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 5. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 6. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 7. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 8. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 9. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 10. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 11. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 12. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 13. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 14. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 15. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 16. IHS Intra/Spex technology and images copyright (c) IHS 2003
- 17. IHS Intra/Spex technology and images copyright (c) IHS 2003