BS 2
•Download as PPTX, PDF•
1 like•69 views
Single phase power supply uses one conductor to provide power through two wires, while three phase uses three conductors and four wires to provide higher and more efficient power transfer. Single phase is simpler and less expensive but is less efficient for heavy loads, while three phase can handle larger loads with less power loss but requires more complex installation and maintenance.
Report
Share
Report
Share
Recommended
Force Energy Saver
The patented FORCE Energy Saving System reduces the electricity usage of motor driven equipment especially VFD’s, appliances, electronics, refrigeration systems and electric furnaces by improving and stabilizing the condition and performance of your electrical system. FORCE is committed to the reduction of electricity usage of Companies and residences worldwide.
A novel transformer less interleaved four-phase step-down dc converter with l...
A novel transformer less interleaved four-phase step-down dc converter with low switch voltage stress and automatic uniform current sharing characteristics
Do Your Projects With Technology Experts...
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Retail P P T Kvar Presentation 2
The document describes the KVAR Energy Controller (EC) as a solution for rising energy costs. It saves energy by optimizing the power factor of electric motors and other inductive loads. The KVAR EC stores reactive power and recycles it to supply motors more efficiently. Tests show it can reduce energy bills by up to 25% on average with typical payback periods of under two years. By optimizing power factor, the KVAR EC reduces wasted electricity and lowers utility demand charges.
Very Pc Enterprise Servers
VeryPC Enterprise Servers help reduce data center costs through their low power and heat output servers. Their J200 dual servers use half the power and produce half the heat of standard servers, allowing twice as many servers per rack. Their L200 storage servers have low power consumption and can provide 252TB of storage per rack. Virtualizing with VeryPC and VMware can reduce physical servers, make management easier, allow underused servers to be powered off, quickly increase server capacity, and eliminate downtime. VeryPC is interested in discussing how their server platforms can help customers reduce costs and have financing options available.
99% complete (4)
Single phase wiring uses one active wire and one neutral wire, is simpler and cheaper but less efficient for power transfer. It is suitable for small houses with few appliances. Three phase wiring uses three active wires and a neutral, is more complex but transfers power more constantly and efficiently. It is suitable for larger houses with many air conditioners and appliances. Upgrading from single to three phase wiring may not be necessary unless the house experiences frequent overloading of the current system.
Difference between single phase wiring and three phase (latest)
Single phase wiring uses two wires to deliver power at voltages up to 240V and is suitable for small appliances. Three phase wiring uses three conductors and a neutral wire to deliver continuous power at 415V, making it suitable for larger homes and allowing multiple appliances to run in parallel more efficiently. While single phase wiring has lower installation costs, three phase wiring provides more stable power delivery and is recommended for homes with higher power needs or air conditioning units over 1.5 horsepower. Upgrading from single to three phase requires applying to the electricity provider and can take several weeks and cost between RM2,000-10,000 depending on the home size.
Difference between single phase wiring and three phase wiring
The document compares single phase and three phase wiring. It notes that single phase wiring uses two wires while three phase uses three conductors and a neutral wire. Single phase supplies 240 volts at peaks and dips, while three phase supply is continuous and delivers higher voltage. Three phase wiring is suitable for larger homes and applications needing to run multiple high power appliances simultaneously. It has advantages like more efficient power transmission using less material and producing uniform torque.
AC.pptx
This document discusses and compares overhead and underground power transmission lines. It covers topics such as distribution systems, overhead vs. underground transmission lines, their advantages and disadvantages. Key points are that overhead lines have lower installation and maintenance costs but are more vulnerable to storms, while underground lines have higher costs but offer more reliability and safety. The conclusion emphasizes the need for utilities to consider both overhead and underground options for power distribution.
Recommended
Force Energy Saver
The patented FORCE Energy Saving System reduces the electricity usage of motor driven equipment especially VFD’s, appliances, electronics, refrigeration systems and electric furnaces by improving and stabilizing the condition and performance of your electrical system. FORCE is committed to the reduction of electricity usage of Companies and residences worldwide.
A novel transformer less interleaved four-phase step-down dc converter with l...
A novel transformer less interleaved four-phase step-down dc converter with low switch voltage stress and automatic uniform current sharing characteristics
Do Your Projects With Technology Experts...
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Retail P P T Kvar Presentation 2
The document describes the KVAR Energy Controller (EC) as a solution for rising energy costs. It saves energy by optimizing the power factor of electric motors and other inductive loads. The KVAR EC stores reactive power and recycles it to supply motors more efficiently. Tests show it can reduce energy bills by up to 25% on average with typical payback periods of under two years. By optimizing power factor, the KVAR EC reduces wasted electricity and lowers utility demand charges.
Very Pc Enterprise Servers
VeryPC Enterprise Servers help reduce data center costs through their low power and heat output servers. Their J200 dual servers use half the power and produce half the heat of standard servers, allowing twice as many servers per rack. Their L200 storage servers have low power consumption and can provide 252TB of storage per rack. Virtualizing with VeryPC and VMware can reduce physical servers, make management easier, allow underused servers to be powered off, quickly increase server capacity, and eliminate downtime. VeryPC is interested in discussing how their server platforms can help customers reduce costs and have financing options available.
99% complete (4)
Single phase wiring uses one active wire and one neutral wire, is simpler and cheaper but less efficient for power transfer. It is suitable for small houses with few appliances. Three phase wiring uses three active wires and a neutral, is more complex but transfers power more constantly and efficiently. It is suitable for larger houses with many air conditioners and appliances. Upgrading from single to three phase wiring may not be necessary unless the house experiences frequent overloading of the current system.
Difference between single phase wiring and three phase (latest)
Single phase wiring uses two wires to deliver power at voltages up to 240V and is suitable for small appliances. Three phase wiring uses three conductors and a neutral wire to deliver continuous power at 415V, making it suitable for larger homes and allowing multiple appliances to run in parallel more efficiently. While single phase wiring has lower installation costs, three phase wiring provides more stable power delivery and is recommended for homes with higher power needs or air conditioning units over 1.5 horsepower. Upgrading from single to three phase requires applying to the electricity provider and can take several weeks and cost between RM2,000-10,000 depending on the home size.
Difference between single phase wiring and three phase wiring
The document compares single phase and three phase wiring. It notes that single phase wiring uses two wires while three phase uses three conductors and a neutral wire. Single phase supplies 240 volts at peaks and dips, while three phase supply is continuous and delivers higher voltage. Three phase wiring is suitable for larger homes and applications needing to run multiple high power appliances simultaneously. It has advantages like more efficient power transmission using less material and producing uniform torque.
AC.pptx
This document discusses and compares overhead and underground power transmission lines. It covers topics such as distribution systems, overhead vs. underground transmission lines, their advantages and disadvantages. Key points are that overhead lines have lower installation and maintenance costs but are more vulnerable to storms, while underground lines have higher costs but offer more reliability and safety. The conclusion emphasizes the need for utilities to consider both overhead and underground options for power distribution.
20620041 electrical-motors
Electric motors are electromechanical devices that convert electrical energy into mechanical energy. The document discusses types of electric motors including direct current (DC) motors and alternating current (AC) motors. It also discusses assessing motor efficiency and energy efficiency opportunities for electric motors such as using energy efficient motors, reducing underloading, improving power quality, and power factor correction.
Bssss
- Single phase power uses a single conductor to transmit power while three phase uses three conductors and a neutral.
- Three phase power is preferable for larger loads and industrial applications due to benefits like constant power delivery and self starting induction motors.
- To change from single phase to three phase, a certified electrical contractor submits an application to the electricity provider and completes installation works before testing and commissioning.
Electrial tractions
The document discusses electrical traction systems used in rail transport. It describes the key components of diesel-electric and electric traction systems including the diesel engine, alternator, and traction motors. For electric systems, it explains how alternating current is drawn from overhead lines and converted to direct current to power DC series motors or used directly to power AC induction motors. It also discusses multi-system locomotives that can operate on different electrification systems and the use of pantographs to draw power from overhead lines.
Single Phase to Three Phase Converter
single phase to three phase converter by using digital converter in which we firstly convert single phase AC input to DC by using Rectifier and then again convert this DC into Three Phase Ac by using 3-Phase Inverter
Building Services II (Group assignment) - Semester 3
The document provides information about single-phase and three-phase electrical power systems. It defines single-phase power as using two wires to complete a circuit, while three-phase uses three conductors spaced 120 degrees apart. Single-phase is used for smaller loads like homes and businesses, while three-phase is more efficient for industrial applications. The document also includes diagrams of simple single-phase and three-phase wiring for a building, and discusses advantages and disadvantages of each system.
Energy conservation in electric drives
This Ppt gives a short but complete content about the losses occuring in electric drives, different methods to improve the losses occuring in drives and detail description about 3 methods for improving efficiency of drives
lecture 1 & 2.pdf electric power system
Electric power systems involve generation of power at high voltages, its transmission over long distances via transmission lines, and distribution to consumers via lower voltage distribution lines. Historically, direct current power systems were limited in transmission range but the development of alternating current systems enabled economical long distance transmission using transformers. Modern power grids involve large interconnected networks of generation, transmission, and distribution infrastructure to reliably supply electricity.
Triz competition 2014 part2
The machine constantly breaks down every few weeks, costing time and money to fix temporarily. The document discusses applying TRIZ principles to reduce downtime by replacing the fixed-length signal cables with more flexible coiled cables, allowing for cable movement without compromising the machine design. This solution aims to increase productivity while maintaining the ease of operation and complexity of the machine subsystem.
Electric traction (Part 1)
This document discusses electric traction systems for trains. It outlines the requirements of an ideal traction system, the merits and demerits of electric traction, and different supply systems for electric traction including DC, AC, and composite systems. The key advantages of electric traction are cleanliness, high efficiency, high starting torque, less running costs, and more flexibility. However, electric traction also has higher capital costs and requires additional equipment.
Future on power electronics for wind turbine systems
This document discusses the future of power electronics for wind turbine systems. It outlines how wind turbine technology has advanced from 4-8 kW units in the 1980s to today's 4.5-8 MW units, and how control systems are now necessary to regulate frequency and voltage. It describes how wind power can be generated using doubly-fed induction generators or synchronous generators, and compares the advantages and disadvantages of each. Finally, it discusses technology challenges around cost, stability, and reliability, and how further advances in generators, power electronics, and power devices could help wind power match or exceed conventional energy sources.
Future on power electronics for wind turbine systems
Wind turbine technology has advanced significantly since the 1980s, increasing power production per unit from 4-8 kW to 4.5-8 MW today. Power electronics are now a necessary part of wind turbine systems to regulate frequency and voltage. There are two main methods for generating wind power - doubly fed induction generators and synchronous generators. Both have advantages and disadvantages related to cost, efficiency, and connection to the grid. Future developments aim to lower energy costs through improved power electronics, power semiconductor devices, and generators/drive trains to increase reliability and stability of wind power systems.
Basics of Electrical Engineering 4th Module Generation of Power
Textbook of Basics of Electrical Engineering 4th Module "Generating stations,Transmission and distribution of electric power"
Bs ii presentation slides
1) Three phase power uses three conductors that provide power in alternating phases 120 degrees apart, allowing for constant power delivery. Single phase uses two conductors and power drops to zero three times per cycle.
2) Three phase power is preferable for premises with high power demands like large homes, industries, and offices due to its ability to transmit more power using smaller cables. It is also more efficient for powering motors.
3) Upgrading from single to three phase power involves applying to the electricity provider and both external wiring by the provider and internal wiring by an electrician. Costs depend on the home size and equipment.
Variable Frequency Drives . Are they worth it?
VFDs (variable frequency drives) are often specified to control pump speed for various reasons, but they are not always the best or most energy efficient solution. Alternatives to consider include pressure/flow control valves, bypass valves, changing pump impeller size, using multiple pumps, or varying the pumped fluid properties/conditions. While VFDs can provide benefits in some cases, they also have downsides such as increased capital and operating costs, reduced motor lifespan, and lower combined motor/VFD efficiency compared to running a properly sized pump at its best efficiency point. Engineers should evaluate all options before specifying a VFD and ensure the electrical design considers potential issues from voltage harmonics and other factors.
Design_of_Power_Transformers.ppt
............................................................................................................................................................................................................................................................................................
Wide Vin DC/DC Converters: Reliable Power for Demanding Applications
The document discusses wide input voltage (wide Vin) DC-DC converters, highlighting their use in industrial, automotive, and communications systems where input voltages can vary widely and experience transients. It presents challenges faced in these applications and how Texas Instruments' wide Vin controllers and integrated modules address issues like reliability across voltage ranges, overload protection, and high power density with low EMI. Examples are given of wide Vin solutions for isolated bias supplies, boost converters, and automotive systems dealing with start-stop events and battery voltage variations.
Electrical supply & distribution
The document discusses single-phase and three-phase wiring, including their differences, advantages, and considerations for costing approaches. Single-phase wiring is simpler and cheaper but has less power capacity, while three-phase can support higher demand but is more complex. Factors like a building's power needs, efficiency, and cost determine the best option. Safety precautions for working with electricity like using insulated tools and disconnecting power sources are also outlined. Images show various distribution and safety equipment like transformers, switchgear, and personal protective equipment.
Cooler I.D Report.pptx
The in-line fuses for a drive were failing randomly. An investigation found that the conductors and lugs feeding the drive were heating up excessively. Thermography revealed that the conductors from the disconnect to the fuses and from the fuses to the drive were undersized, creating a lot of heat that was likely causing the fuse failures. It is recommended to replace these conductors with a minimum size of 500 MCM to distribute the load more evenly and prevent overheating. Monitoring after the change is also recommended.
BASIC ELECTRO MECHANICAL ARRANGEMENTS.pptx
This document provides an overview of basic electro-mechanical components used in water and wastewater systems. It discusses electrical concepts like current, voltage, power, and power factor. It then describes typical electrical component arrangements including transformers, panels, motors, and protection devices. It also covers cable layout and earthing systems. Load calculations and transformer sizing are demonstrated. Finally, it discusses estimation and costing of electrical works.
Chapter 26
This chapter discusses electrical repairs and diagnostics. It covers electrical terminology, types of circuits, diagnostic equipment like multimeters, and electrical components. Common electrical systems are described like starting, charging, and ignition. The chapter explains locating electrical problems, protective devices, batteries, and safety procedures. Electrical diagrams and a multistep process for repairs are also outlined.
Management science
This document provides information about MTL Construction Sdn. Bhd., including its vision, mission, goals, organizational structure, and job responsibilities. It discusses recruiting 3 management trainees: an accountant to handle financial tasks, prepare reports, and ensure financial security; a site supervisor to oversee the site and employees, manage subcontractors, meet budgets, and ensure schedule and operational standards; and a project engineer to solve technical issues and monitor construction progress. MTL Construction aims to hire qualified candidates with the needed experience and skills to fill these roles.
Bubble deck & hollow core slab
The document discusses Bubble Deck and Hollow Core Slab construction methods. Bubble Deck involves implanting hollow plastic balls into a concrete slab that is reinforced with steel, removing up to 35% of the concrete weight while maintaining strength. Hollow Core Slab is a prestressed concrete element with a constant cross-section that is manufactured using high-tensile strength prestressed strands embedded within. The document describes the materials, manufacturing processes, installation procedures, advantages and case studies for both Bubble Deck and Hollow Core Slab construction.
More Related Content
Similar to BS 2
20620041 electrical-motors
Electric motors are electromechanical devices that convert electrical energy into mechanical energy. The document discusses types of electric motors including direct current (DC) motors and alternating current (AC) motors. It also discusses assessing motor efficiency and energy efficiency opportunities for electric motors such as using energy efficient motors, reducing underloading, improving power quality, and power factor correction.
Bssss
- Single phase power uses a single conductor to transmit power while three phase uses three conductors and a neutral.
- Three phase power is preferable for larger loads and industrial applications due to benefits like constant power delivery and self starting induction motors.
- To change from single phase to three phase, a certified electrical contractor submits an application to the electricity provider and completes installation works before testing and commissioning.
Electrial tractions
The document discusses electrical traction systems used in rail transport. It describes the key components of diesel-electric and electric traction systems including the diesel engine, alternator, and traction motors. For electric systems, it explains how alternating current is drawn from overhead lines and converted to direct current to power DC series motors or used directly to power AC induction motors. It also discusses multi-system locomotives that can operate on different electrification systems and the use of pantographs to draw power from overhead lines.
Single Phase to Three Phase Converter
single phase to three phase converter by using digital converter in which we firstly convert single phase AC input to DC by using Rectifier and then again convert this DC into Three Phase Ac by using 3-Phase Inverter
Building Services II (Group assignment) - Semester 3
The document provides information about single-phase and three-phase electrical power systems. It defines single-phase power as using two wires to complete a circuit, while three-phase uses three conductors spaced 120 degrees apart. Single-phase is used for smaller loads like homes and businesses, while three-phase is more efficient for industrial applications. The document also includes diagrams of simple single-phase and three-phase wiring for a building, and discusses advantages and disadvantages of each system.
Energy conservation in electric drives
This Ppt gives a short but complete content about the losses occuring in electric drives, different methods to improve the losses occuring in drives and detail description about 3 methods for improving efficiency of drives
lecture 1 & 2.pdf electric power system
Electric power systems involve generation of power at high voltages, its transmission over long distances via transmission lines, and distribution to consumers via lower voltage distribution lines. Historically, direct current power systems were limited in transmission range but the development of alternating current systems enabled economical long distance transmission using transformers. Modern power grids involve large interconnected networks of generation, transmission, and distribution infrastructure to reliably supply electricity.
Triz competition 2014 part2
The machine constantly breaks down every few weeks, costing time and money to fix temporarily. The document discusses applying TRIZ principles to reduce downtime by replacing the fixed-length signal cables with more flexible coiled cables, allowing for cable movement without compromising the machine design. This solution aims to increase productivity while maintaining the ease of operation and complexity of the machine subsystem.
Electric traction (Part 1)
This document discusses electric traction systems for trains. It outlines the requirements of an ideal traction system, the merits and demerits of electric traction, and different supply systems for electric traction including DC, AC, and composite systems. The key advantages of electric traction are cleanliness, high efficiency, high starting torque, less running costs, and more flexibility. However, electric traction also has higher capital costs and requires additional equipment.
Future on power electronics for wind turbine systems
This document discusses the future of power electronics for wind turbine systems. It outlines how wind turbine technology has advanced from 4-8 kW units in the 1980s to today's 4.5-8 MW units, and how control systems are now necessary to regulate frequency and voltage. It describes how wind power can be generated using doubly-fed induction generators or synchronous generators, and compares the advantages and disadvantages of each. Finally, it discusses technology challenges around cost, stability, and reliability, and how further advances in generators, power electronics, and power devices could help wind power match or exceed conventional energy sources.
Future on power electronics for wind turbine systems
Wind turbine technology has advanced significantly since the 1980s, increasing power production per unit from 4-8 kW to 4.5-8 MW today. Power electronics are now a necessary part of wind turbine systems to regulate frequency and voltage. There are two main methods for generating wind power - doubly fed induction generators and synchronous generators. Both have advantages and disadvantages related to cost, efficiency, and connection to the grid. Future developments aim to lower energy costs through improved power electronics, power semiconductor devices, and generators/drive trains to increase reliability and stability of wind power systems.
Basics of Electrical Engineering 4th Module Generation of Power
Textbook of Basics of Electrical Engineering 4th Module "Generating stations,Transmission and distribution of electric power"
Bs ii presentation slides
1) Three phase power uses three conductors that provide power in alternating phases 120 degrees apart, allowing for constant power delivery. Single phase uses two conductors and power drops to zero three times per cycle.
2) Three phase power is preferable for premises with high power demands like large homes, industries, and offices due to its ability to transmit more power using smaller cables. It is also more efficient for powering motors.
3) Upgrading from single to three phase power involves applying to the electricity provider and both external wiring by the provider and internal wiring by an electrician. Costs depend on the home size and equipment.
Variable Frequency Drives . Are they worth it?
VFDs (variable frequency drives) are often specified to control pump speed for various reasons, but they are not always the best or most energy efficient solution. Alternatives to consider include pressure/flow control valves, bypass valves, changing pump impeller size, using multiple pumps, or varying the pumped fluid properties/conditions. While VFDs can provide benefits in some cases, they also have downsides such as increased capital and operating costs, reduced motor lifespan, and lower combined motor/VFD efficiency compared to running a properly sized pump at its best efficiency point. Engineers should evaluate all options before specifying a VFD and ensure the electrical design considers potential issues from voltage harmonics and other factors.
Design_of_Power_Transformers.ppt
............................................................................................................................................................................................................................................................................................
Wide Vin DC/DC Converters: Reliable Power for Demanding Applications
The document discusses wide input voltage (wide Vin) DC-DC converters, highlighting their use in industrial, automotive, and communications systems where input voltages can vary widely and experience transients. It presents challenges faced in these applications and how Texas Instruments' wide Vin controllers and integrated modules address issues like reliability across voltage ranges, overload protection, and high power density with low EMI. Examples are given of wide Vin solutions for isolated bias supplies, boost converters, and automotive systems dealing with start-stop events and battery voltage variations.
Electrical supply & distribution
The document discusses single-phase and three-phase wiring, including their differences, advantages, and considerations for costing approaches. Single-phase wiring is simpler and cheaper but has less power capacity, while three-phase can support higher demand but is more complex. Factors like a building's power needs, efficiency, and cost determine the best option. Safety precautions for working with electricity like using insulated tools and disconnecting power sources are also outlined. Images show various distribution and safety equipment like transformers, switchgear, and personal protective equipment.
Cooler I.D Report.pptx
The in-line fuses for a drive were failing randomly. An investigation found that the conductors and lugs feeding the drive were heating up excessively. Thermography revealed that the conductors from the disconnect to the fuses and from the fuses to the drive were undersized, creating a lot of heat that was likely causing the fuse failures. It is recommended to replace these conductors with a minimum size of 500 MCM to distribute the load more evenly and prevent overheating. Monitoring after the change is also recommended.
BASIC ELECTRO MECHANICAL ARRANGEMENTS.pptx
This document provides an overview of basic electro-mechanical components used in water and wastewater systems. It discusses electrical concepts like current, voltage, power, and power factor. It then describes typical electrical component arrangements including transformers, panels, motors, and protection devices. It also covers cable layout and earthing systems. Load calculations and transformer sizing are demonstrated. Finally, it discusses estimation and costing of electrical works.
Chapter 26
This chapter discusses electrical repairs and diagnostics. It covers electrical terminology, types of circuits, diagnostic equipment like multimeters, and electrical components. Common electrical systems are described like starting, charging, and ignition. The chapter explains locating electrical problems, protective devices, batteries, and safety procedures. Electrical diagrams and a multistep process for repairs are also outlined.
Similar to BS 2 (20)
Building Services II (Group assignment) - Semester 3
Building Services II (Group assignment) - Semester 3
Future on power electronics for wind turbine systems
Future on power electronics for wind turbine systems
Future on power electronics for wind turbine systems
Future on power electronics for wind turbine systems
Basics of Electrical Engineering 4th Module Generation of Power
Basics of Electrical Engineering 4th Module Generation of Power
Wide Vin DC/DC Converters: Reliable Power for Demanding Applications
Wide Vin DC/DC Converters: Reliable Power for Demanding Applications
More from Erik Ong
Management science
This document provides information about MTL Construction Sdn. Bhd., including its vision, mission, goals, organizational structure, and job responsibilities. It discusses recruiting 3 management trainees: an accountant to handle financial tasks, prepare reports, and ensure financial security; a site supervisor to oversee the site and employees, manage subcontractors, meet budgets, and ensure schedule and operational standards; and a project engineer to solve technical issues and monitor construction progress. MTL Construction aims to hire qualified candidates with the needed experience and skills to fill these roles.
Bubble deck & hollow core slab
The document discusses Bubble Deck and Hollow Core Slab construction methods. Bubble Deck involves implanting hollow plastic balls into a concrete slab that is reinforced with steel, removing up to 35% of the concrete weight while maintaining strength. Hollow Core Slab is a prestressed concrete element with a constant cross-section that is manufactured using high-tensile strength prestressed strands embedded within. The document describes the materials, manufacturing processes, installation procedures, advantages and case studies for both Bubble Deck and Hollow Core Slab construction.
Site surveying report (theodolite)
The document is a report on a theodolite survey conducted by students. It details the objectives, procedures, and calculations involved in open and closed traverses. Key findings include adjustments made to initial angular measurements to account for errors, adjusted angles and coordinates, and computation of distances using the stadia method.
Site surveying report (levelling)
The document presents the results of a student fieldwork exercise in surveying. It includes leveling data collected at 12 stations using both the rise and fall method and the collimation method. Adjustments were made to both data sets to account for instrumental errors. The final misclosure of -0.029m was within an acceptable range, demonstrating the accuracy of the leveling exercise. The document provides background on leveling techniques and terminology to contextualize the collected data and results.
Building Services Assignment
This document discusses telecommunication services for a high-rise building project. It covers the installation process including main distribution frames, fiber termination boxes, riser closets, and pathways. It also discusses application requirements, management systems, advantages and disadvantages of telecommunication and fiber optic cables. A case study of a luxury apartment development called Upper East@Tiger Lane is provided as an example, outlining its telecommunication infrastructure design including fiber to home services. Suggestions are made for future improvements to telecommunication systems.
Building Services Assignment
This document discusses telecommunication services for high-rise buildings. It covers the installation process including main distribution frames, fiber termination boxes, and riser closets. Safety precautions and management systems are also outlined. The advantages of telecommuting include flexibility in work location and time. Optical fiber cables provide high bandwidth but are more expensive to install than copper cables. Case studies demonstrate best practices for telecommunication infrastructure design in high-rise buildings.
ITD: Project 3
This document appears to be a scanned receipt from a grocery store listing various food items purchased including eggs, milk, bread, bananas, and ground beef. The total for the grocery items comes to $36.87. The receipt shows a payment was made with a credit card ending in 4321.
ITD: Project 2
This document is a scanned receipt from a grocery store purchase on January 15th, 2022 for $167.57. It lists the items bought including produce, dairy, baked goods, and other grocery items. The payment was made with a credit card ending in 4321.
CL Project 2B
The document is a scanned image of a receipt from a restaurant called "The Grill" dated January 15th, 2023. It shows the customer's name as John Doe and lists items purchased including a cheeseburger, fries, and a soda for a total of $12.45 including tax. The receipt includes a thank you message from The Grill and lists their business address.
Constructed Landscape: Project 2a II
The document discusses the importance of diversity and inclusion in the workplace. It notes that a diverse workforce leads to better problem solving and decision making by bringing in a variety of perspectives. The document encourages embracing diversity to create an environment where all employees feel respected and able to perform their best work.
Constructed Landscape: Project 2
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the property located at 123 Main St. It specifies the monthly rental rate of $1,000 due on the 1st of each month, the security deposit of $500, and responsibilities of landlord and tenant for repairs and maintenance. The lease period is for one year beginning January 1st, 2023 and either party must give 30 days notice if they do not intend to renew the agreement.
english 2 assignment
Wan Choon Tong and Toon Choon Thong are two Chinese herbal shops located in different areas of Malaysia. Wan Choon Tong has been operating for 62 years in Seremban, while Toon Choon Thong has been operating for 52 years in Semenyih. Both shops sell traditional Chinese herbs and provide health consultations. However, Wan Choon Tong sees more customers daily (around 100) due to its location in a larger, more developed city. Toon Choon Thong averages 30-50 customers daily in the smaller town of Semenyih. While both shops faced challenges when starting, Wan Choon Tong had an easier time gaining regular customers as it was established earlier and
Social Pyscology-assignment 2:
Jack excels at online gaming but is unable to focus on his studies as his finals approach. His girlfriend helps motivate him to study by bringing him to the quiet library and helping manage his time so he can rearrange his schedule. In the exam, Jack performs well due to his diligent studying in the past few days in the library, proving that his girlfriend's encouragement and help with time management were effective in helping him focus on his academics.
Psycology final project
This document outlines an assignment for a research report on social psychology concepts. It includes the group members, course details, objectives of the project, and summaries of the methods and findings. The group conducted experiments related to stereotype, mere exposure effect, fear-based appeals, bystander effect, and bias. They filmed social experiments around campus and wrote a report of their findings, discussing how the results related to each concept.
Social physcology essay
This document contains an individual journal submission from a student named Ong Chia Hong. The journal discusses several topics related to social psychology, including detecting deception, counterfactual thinking, the power of persuasion, social learning, and prosocial behavior. For each topic, the student provides two entries describing personal experiences related to that topic.
EPC Mural Art
This document discusses several murals located in Shah Alam, Malaysia. It begins by defining mural art as any artwork directly applied to walls or large surfaces. It then describes three specific murals - an owl mural representing intellectualism, a black and white portrait reflecting on art, and a mural with faces displaying different emotions. Each mural description includes the artist, concepts depicted, and non-verbal messages or codes used. References are provided at the end.
Account assignment
This document analyzes the financial ratios of Starbucks Corporation from 2012-2013. It finds that the company's profitability declined over this period as return on equity and net profit margin decreased. However, the gross profit margin increased, indicating better control of costs of goods sold. Liquidity also weakened as the current ratio fell below the minimum requirement of 2:1. The document recommends against investing in Starbucks due to low profitability, stability, and an expensive share price with a high P/E ratio of 28.6.
Research report
This document is a report comparing two bakery businesses located in different geographical areas. It discusses Wonderbread Bakery and Café in Seremban and The Carpenter's Daughter in Subang. The report includes a table of contents, key summary, history of the bakery trade, brief descriptions of the two businesses, and a comparative analysis of their competitive traits such as number of competitors and strategies used. It finds that The Carpenter's Daughter has been more commercially successful.
Ong chia hong city report
1. The document presents a report on designing a future city called Vinne. Research was conducted on ancient cities like Babylon, present cities like Freiburg, and future city concepts to inform the design.
2. Vinne is proposed as an underground city with 4 levels, using renewable energy and situated near the ocean for agricultural use. Key elements include solar panels, a water reservoir, bullet train access, and zoning for government, residential, farm, and industry areas.
3. The design of Vinne aims to create a sustainable city protected from high surface temperatures, with natural lighting, fresh air circulation, and renewable energy sources. The underground structure and location near the sea supports the city's planned functions.
Document 1
This document provides details about a proposed project to construct a new recreation area at Taylor's University Lakeside Campus. The key points are:
1) The project aims to build a park next to the Syopz Mall that provides students and staff with a unique dining experience while enjoying views of the lake.
2) The park should be environmentally friendly and utilize the natural scenery without disruption. It should also provide comfort and a natural feel.
3) Benefits include a unique experience, enhancing the lake's beauty, and increasing the university's green space and publicity. Approvals will be required from the local authorities by November 2013.
More from Erik Ong (20)
Recently uploaded
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaOptimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Recently uploaded (20)
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
BS 2
- 1. Basic For Comparison Single Phase Three Phase Diagram Definition The power suppy through one conductor The power supply throught three conductirs Wave Shape Power Supply Connector Number of wire Require two wires for comleting the cuircuit Require four wires for comleting the cuircuit Voltage Carry 230V Carry 415V Phase Name Split Phase No other name Power Transfer Capability Minimun Maximun Network Simple Complicated Power Failure Occurs Do not occur Loss Maximun Minimun Efficiency Less High Economical Less More Uses For home appliances In lagre industries for running heavy loads
- 2. Single Phase Three Phase Advantage • Less expensive to manufacture • Require little maintainence • Easy to replace part • Design is much simpler • Quick installation • Smooth and continuous flow of power • Allow for longer cord lengths/cable to run • Require less place to install • Have higher power factor Disadvantage • Parts need to be constant begin monitors • Experience more interruptions in electrical flow • Motors have shorter lifespan • Cannot handle overload • Units are more efficient to run, but more expensive to purchase • Increase cost and inconvenience repairs • Service is more expensive than single phase • Motors may experience rotation issues if installed improperly Conclusion