The document provides a summary of Bidhan R. Dey's credentials and experience. It includes his educational background in electrical engineering and qualifications. It then details his extensive experience over 35+ years working on electrical design, procurement, and construction projects for offshore platforms and onshore facilities around the world. It lists specific roles he has held with major companies and provides examples of key projects he has worked on and responsibilities held.

1. BIDHAN R. DEY
1602 Kent Valley Lane, Rosenberg, Texas 77471
281 344 1004 (home), 832 641-1435 (cell),
E-mail: bidhandey2@gmail.com
Credentials
B.S. in Electrical Engineering, University of Nottingham (1978), England
Graduate Studies in Electrical Engineering, University of Ottawa (1988), Canada
Programmable Logic Controller (PLC), Southern Alberta Institute of Technology (1991), Canada
ETAP training, Houston, Texas (2008)
Qualifications Summary
 Have experience in E&I design during FEED/detailed engineering, procurement and
construction in Offshore Platforms, FPSO, Semi-Submersible Drilling Rigs, TLWP, DPS2
Modular Capture Vessels; Onshore - Refinery & Petrochemical Plants, Power Plants,
Pipeline & Pump Stations projects in the United States, Canada, Europe and Dubai & KSA.
 Have extensive knowledge and experience in MV & LV power generation, distribution &
protection in offshore platforms and onshore projects.
 Have managed and supervised E&I team and EPCI Contractor for all site installations &
commissioning, monitored the progress and took necessary actions to ensure timely
completion of key milestones.
 Have extensive experience in field instruments and control systems design, packaged
equipment, pumps and compressors monitoring systems and analyzers packages.
 Have experience in hardware design & configurations for PLC, DCS & SCADA systems.
 Have experience in ETAP for Electrical Power System Study.
 Familiar with ANSI / IEC codes, standards and specifications.
 Familiar with ABS rules – MODU & Steel Vessel rules, API – 14FZ etc
Employment History
2011 – Present ExxonMobil, Houston, TX
2008 – 2011 SBM Offshore, Houston, TX
2005 – 2008 Excel Engineering, Houston, TX
2001 - 2005 Kaneka Texas Corporation, Pasadena, TX
1995 – 2001 Kellogg Brown & Root, Houston, TX
1991 – 1995 Saudi Aramco, Abqaiq, Saudi Arabia
1989 - 1991 PCL-Braun-Simons Ltd, Calgary, Canada
1984 – 1987 Partec Lavalin, Calgary, Canada

2. BIDHAN R. DEY
Major Assignments (Continued)
1982 – 1984 Optima Engineers Constructors, Calgary, Canada
1978 – 1982 Standard Telephones and cables, London, England
Key Projects
ExxonMobil, Houston, Texas:
Execution Planning Lead Electrical Engineer – West Qurna 1 Project in IRAQ:
Responsible for overseeing engineering contractors for detailed engineering, procurement and
construction. Design include replacing existing 132KV National Grid power with new 11KV
power generation using 4 x 13.6 MW Solar Turbine Titan 130 generators, Connecting all
degassing stations power via 33KV overhead distribution lines. Identify all electrical interface
points of major tie-ins with different units within the degassing stations.
Project Lead Electrical Engineer – Point Thomson Project to develop gas condensate field
in Alaska North Slope: Responsible for overseeing Worley Parsons/Fluor in CA for facilities
FEED/detailed engineering, procurement and construction. Design includes facilities 13.8KV,
4x7MW Solar Turbine Taurus-70 and 13.8KV 3x1.8MW Standby Power Generation,
Distribution and Protection; PMS / PCS interface with power generation modules and
13.8KV/4.16KV SWGRs modules for plant operations, Integration of PMS/PCS/Compressor
control panel with Autotransformer Control Cabinet for starting injection compressors
2x100000HP motors. Provide direction and guidance to the contractors/sub-contractors on
Electrical technical issues. Review & approve all purchase order for all electrical equipment and
related packages including long lead equipment. Responsible for inspection/approve of FAT on
all major electrical equipment & PCS/SIS control system cabinets. Responsible for approving all
project drawings for construction and overseeing the construction of all sealift modules by
Hyundai Heavy industries (HHI) in Ulsan site, Korea.
Responsible for reviewing & approving project ETAP study reports on 2x10000HP Motor
Starting, Load Flow, Short Circuit, Arc Flash Study, Relay Coordination & Transient Stability
Analysis for the power systems plant.
Project Lead Electrical Engineer – design & construction: DPS2 Modular Capture Vessel
(MCV) for Marine Well Containment System (MWCS) Project:
Responsible for overseeing EPC contractors for detail design phase - 6.6KV Power Generation,
Distribution and Protection for the MCV, Equipment specifications, Selection & purchasing of
all major electrical & control equipment including Wartsila 4 x 4150KW Diesel Generators,
Tanker/Emergency Generators, MV/LV SWGRs, MCCs, Transformers, Thrusters(5x2150KW) /
VFDs, PMS and VMS. Performed FAT on all major electrical equipment. Run ETAP (version
11.1.1C) to study MCV’s power systems Load Flow, Short Circuit, Arc Flash Study, and Relay
Coordination & Transient Stability Analysis.

3. BIDHAN R. DEY
Major Assignments (Continued)
Construction site responsibilities includes overseeing engineering construction contractor Dubai
Dry Dock World (DDW) in Dubai for construction & commissioning work of MWCS project
including all E/I installation, integration of PMS/FGDS/VMS to Kongsberg IAS.
SBM Offshore, Houston, TX: Principal Engineer - Electrical: Semi-Submersible DPS2
Drilling Rigs, TLWP Drilling systems and FPSO Projects
Overseeing projects during feed process and detail design for deliverables, design of power
system to meet the total electrical power requirements for FPSO and Rigs and the main
generators are sized with a sufficient capacity of power to meet all normal operating loads.
Established the requirements for design deliverables relating to Electrical Engineering, monitor
progress of the development of electrical design deliverables and propose corrective actions in
the event of potential schedule overrun.
Responsible for MV and LV Power Generation & Distribution systems design, Electrical load
calculations & selection of Generators, SWGR, Power Transformers, VFD & MCCs, Drilling
equipment and PMS including sizing & selecting of battery chargers and UPS systems for all
critical loads, Electrical equipment specifications & data sheets for IEC/ANSI offshore
application projects, Design & layout termination details of MV/LV Generators / SWGR, MCCs,
drilling VFD SWBD and Thrusters VFD & Motors.
Responsible for all major electrical packages & perform vendor bid evaluation and coordination
with the equipment vendors and perform FAT on all major equipment. Interface with clients &
ABS to resolve their comments and issues.
Used ETAP version 7.1.0C to performed Electrical power system study for various FPSO and
Semi-Submersible drilling rigs.
Interface with construction site and platforms to resolved site queries.
Excel Engineering, Houston, TX. Lead Electrical Engineer: Offshore platform projects:
Pioneer, Devon, Petrotech, Dana Gas-Khor Mor LPG Recovery Plant in Kurdistan in Iraq, Long
Point Offshore Production Facility for El Paso Production Oil & Gas Co. and Offshore
Production Facility for BPZ Energy in Peru.
Responsibilities included overall design & layout of MV/LV power generation, distribution &
protection. Design/layout 20 MVA/23.4 KV power feed run from FPSO to remote central
platform via submersible power cables.
Performed load analysis to select overall platforms power requirements and written all major
electrical equipment specifications. Responsible key one line diagram, motor schematics and
panel drawings. Performed vendor bid evaluation and selected vendors. Issued requisition for
purchase of Main / Emergency Generators, SWGRs, Power Transformers, MCCs, MV VFDs for
ESPs, Battery Chargers & UPS systems, HVAC systems, Worked on NAV-AID, Fire & Gas and
PAGA Systems and laid out drawings. Reviewed all project drawings and checked vendor data.
Performed FAT on all vendors supplied equipment before shipment and coordinated with the
team at the construction site.

4. BIDHAN R. DEY
Major Assignments (Continued)
Kaneka Texas Corporation, Pasadena, TX. Lead E & I Engineer in the Maintenance
Engineering Dept: Responsible for leading maintenance engineering department in all on going
plant improvement projects. Developed and evaluated power studies for all the units in the plant.
Upgraded 138KV – 12.47KV main substation transformers capacity from 12 MVA to 22.4
MVA. Installed capacitor banks and reactor bank on 12.47KV line to improve power factor and
reduce harmonics. Designed and executed capital projects for Polymer modifiers manufacturing
plant. Developed cost estimate for capital approval. Co-coordinated and supported construction
and installation of electrical equipment, instruments & control systems in the plant. Installed new
12.47KV SWGR in the main substation and provided 12MVA power to the new plant.
Developed Safety Integrity Level (SIL) for the plant and introduced new safety instrumented
TMR in the plant. Developed DCS (Hitachi) I/O configuration for major projects. Responsible
for field instruments, engineering design for relay panels, gas detection systems and termination
detail for different units in the plant, Vendor supplied equipments and their FAT. Responsible for
selecting E / I & C systems vendors & prepared and issued requisition for their purchase.
Developed engineering detail design & initiated purchase order for palletizer system.
M.W. Kellogg Company / KBR, Houston, TX, Electrical Engineer: PEMEX EPC-1, AKAL
C2 and Compressor & Process Platforms projects in Mexico and SABLE Offshore Energy
project in Nova Scotia, Canada.
Onshore Projects: Halobutyl Expansion Project for ExxonMobil Chemical Company, Baytown, /
Phillips Petroleum Co, Pasadena and Sonartech in Algeria.
Reviewed project standard and specifications for projects. Worked on overall MV/LV one line
diagrams, one line diagrams for LV MCCs and UPS & DC electrical panels design. Created
electrical equipment lists and area classification plan drawings. Specified gas turbine generators
& diesel engine generators for platforms power generation and their protection. Worked on
system grounding and equipment grounding. Worked and reviewed SWGR & MCC detail one
line drawing and their termination drawings and LER for the platforms. Reviewed vendor
packages on main generators & emergency generators control panel, SWGR, power transformers
and MCC and performed bid evaluation for projects. Selected vendors and issued requisition for
purchase of equipment. Issued drawings for construction. Interfaced with the clients and visited
site to resolved site queries. Worked with the construction team to monitor progress and
interfaced with clients. Performed field evaluation of electrical equipment and instruments in the
plant and recommended for replacement or refurbish. Performed QA/QC on vendor supplied
packages.
Saudi Aramco, Abqaiq, Saudi Arabia. Project Engineer. (Aramco - PMT) on Berri Gas
Plant TDC-3000 DCS upgrading Project in Jubail, AXL Segregation project in Abqaiq plant and
East/West pipeline (PRS upgrading) project in Yanbu.

5. BIDHAN R. DEY
Major Assignments (Continued)
Overseeing the EPC contractors for all E & I detailed design, procurement & construction.
Responsible for reviewing contractor’s engineering design work included P&ID’s development,
data sheet specifications for field instrumentation (control valves, pressure relief valves, MOV’s,
flow/level/temperature/pressure instruments), PLC and DCS configuration, I/O loop and
termination details.
Responsible reviewing all drawings and submittals for upgrading 13.8 KV SWGR in the main
substation and interconnection diagrams. Run underground power cables to MV motors in the
field. Approved electrical and instrumentation design packages for construction. Reviewed
electrical / instruments bid packages. Prepared and issued requisitions for purchase of electrical
equipment / instruments and control systems for the projects.
Responsible for supervision of construction contractor to install 4.16 KV Switchgears, MV
drives, MCC’s and UPS in the Substation building; Booster pumps, Shipping pumps, MCC’s and
instrumentation in the field; Temperature/Vibration Monitors, PLC(Triconex), Fisher Provox
DCS in the control room. Tie-in field terminations with control room and SCADA systems.
Responsible for pre-commissioning and testing of instruments/equipment and loop checked.
PCL-Braun-Simons Ltd., Calgary, Canada. Electrical Engineer. Husky Bi-Provincial
Upgrade Project and Esso Chemical plant upgrade project.
Prepared and reviewed load lists for medium and low voltage systems, prepared single line
diagrams, equipment layouts, area classifications, prepared equipment specifications and data
sheets and also responsible for selection of vendors and issuing requisitions for purchase of
equipment for the project. Performed technical bid analysis and FAT for the project. Design and
layout termination details marshalling panels, relay panels, temperature & vibration monitoring
systems to interface with PLC / Foxboro I/A DCS. Provided liaison with contractors during
project construction and commissioning.
Partec Lavalin, Calgary, Canada. Field Engineer. Syncrude Upgrading Project.
Review electrical and instrumentation design packages prepared by other consulting engineers
for the projects. Providing liaison with construction contractors during project installation and
commissioning of 4.16KV switchgear, MCC’s electrical equipment and instruments / control
systems. Provide technical support to the maintenance and operations group with regards to
troubleshooting of instruments / electrical equipment in the field, control room and upgraded
main substation and installed new feeder & cable trays. Responsible for reviewing all physical
aspects of the involved equipment, voltage levels, and determining whether equipment needs
replacement-all with the objective of ensuring that the clients’ requirements have been met.
Worked closely with design teams, project managers and construction crews.
Optima Engineers Constructors, Calgary, Canada. E & I Engineer. Shell Oil CO2 Injection,
Home Oil Water Injection and Husky Oil Gas Plant Projects.

6. BIDHAN R. DEY
Major Assignments (Continued)
Project duties included 138 KV / 13.8 KV Electrical power system study (using DAPPER
computer program), Demand load and Load flow and Voltage drop analysis, Fault study
analysis, Transient motor starting analysis for 4000HP and 6000HP motors at 4.16KV.
PLC control panel design and layout wiring termination detail including PLC I/O loop drawings.
Worked on P&ID’s development. Sizing and preparing data sheet specifications for field
instruments (control valves,relief valves, flow meters, transmitters and switches). Prepared and
issued requisitions for purchase of instruments and PLC systems for the projects. Performed
QA/QC on vendor packages. Reviewed vendor equipment packages and integrate them with
DCS and Safety systems
REFERENCES: Furnished upon request

7. BIDHAN R. DEY
Major Assignments (Continued)
Project duties included 138 KV / 13.8 KV Electrical power system study (using DAPPER
computer program), Demand load and Load flow and Voltage drop analysis, Fault study
analysis, Transient motor starting analysis for 4000HP and 6000HP motors at 4.16KV.
PLC control panel design and layout wiring termination detail including PLC I/O loop drawings.
Worked on P&ID’s development. Sizing and preparing data sheet specifications for field
instruments (control valves,relief valves, flow meters, transmitters and switches). Prepared and
issued requisitions for purchase of instruments and PLC systems for the projects. Performed
QA/QC on vendor packages. Reviewed vendor equipment packages and integrate them with
DCS and Safety systems
REFERENCES: Furnished upon request