Martin Royse has over 37 years of experience in electrical engineering management, design, maintenance and project management. He is seeking a growth position with a progressive company. His most recent experience was as the Driller's Cabin Electrical Engineering Supervisor at National Oilwell Varco, where he managed electrical design and ensured regulatory compliance. Prior to that, he held roles such as Electrical Design Manager and Senior Systems Design Specialist at Omron Oilfield and Marine, where he designed large drive systems and control systems for drilling rigs. He has extensive experience in AutoCAD and various control systems.

1. 17630 Moss Point
Dr.
Spring, TX 77379
Mobile (812)890-5997
E-mail
martin.royse@gmail.com
Martin Royse
Objective Electrical Engineer with thirty-seven years of experience in engineering
management, design, maintenance and project management seeks
growth position with a progressive company.
Work experience 2014 – 2016 National Oilwell Varco Houston, Texas
(Manufacturer of drilling rigs for land and off shore applications)
Driller’s Cabin Electrical Engineering Supervisor
 Manage electrical design of Driller’s Cabin electrical and ancillary
systems including power, HVAC, lighting, CCTV, talkback and fire and
gas protection.
 Ensure system design compliance with hazardous area and other
regulations including NEC-500, NEC-505, CE ATEX, IECEx, ABS, NFPA
496, EAC and other
 Developed IP based CCTV system for use on drilling rigs. Was working
on development of IP based talkback system for use on drilling rigs.
 Provided electrical design support for sales, quotations and proposals.
Provide support for Installation and Commissioning groups world-wide in
rig start-ups.
 Performed management and supervisory functions for ten employees
including reviews, job assignments, scheduling,
 Worked with other departments including Mechanical, Amphion, Tools,
Rig Electrical and Software to coordinate cooling, cabin installation,
interconnect cabling, power requirements and communications of
systems.
 Developed a group of young engineers into a highly functioning team
well suited to meet the electrical design needs of the peak rig demand
during 2014 and 2015.
2007 – 2014 Omron Oilfield and Marine Houston, Texas
(Provider of AC and DC drive systems and custom control systems for
the oil and gas industry)
Electrical Design Manager 2011 – 2014
 Manage a team of electrical engineers, designers and draftsmen to
produce project designs for custom engineered PCR’s and drillers
cabins.
 Act as senior electrical technical reference to create design guidelines for
rig power and control system.
 Work with mechanical team, production, sales, QC, and field service to

2. define projects, assist with quoting, facilitate production, testing and
startup, field modifications and customer support.
Senior Systems Design Specialist 2007 - 2011
 Design large horsepower SCR and VFD (Yaskawa) drive systems for
drilling rigs, drillers consoles and cabins for associated rigs.
 Design generator controls and switchgear for rig drive SCR/VFD houses.
Perform short circuit analysis and circuit breaker coordination for
switchgear.
 Create complete drawing packages using AutoCAD 2008.
 Create engineering standards for consistent and modular VFD and PLC
designs, reducing design time and manufacturing costs.
 Work with customers to tailor preliminary conceptual designs to their
exact specifications and needs.
1994 – 2007 Gemtron Corporation Vincennes, Indiana
(Manufacturer of glass products for the furniture and appliance industries)
Project Engineer
 Design and install manufacturing machinery and systems used in the
glass fabrication business in seven manufacturing locations including the
US, Canada and Mexico.
 Responsible for the administration of the Capital Budget for the entire
corporation.
 Experience with Allen Bradley PLC’s, VFD’s and DC Drives.
 Designed control systems using AutoCAD 2004.
 Programmed Allen Bradley PLC’s using RSLogix, RSLinx and
RSNetworx.
 Designed automated machinery to reduce labor and scrap costs.
 Designed systems and machines to increase production rates on
existing production lines.
 Made numerous trips to Monterrey and San Luis Potosi, Mexico to install
systems and machinery in manufacturing facilities there.
1988 - 1994 Bowater, Inc – Southern Division Calhoun, Tennessee
(Manufacturer of newsprint, computer forms and market pulp)
Electrical Engineer
 Project leader for various projects involving process instrumentation,
power distribution and UPS systems. Projects ranged from $10,000 to
$2,000,000 total cost.
 Set up a plant-wide preventative maintenance record keeping system for
over 4000 lubrication points.
1985 - 1988 Fort Howard Paper Company Muskogee, Oklahoma
(Manufacturer of tissue and towel products from 100% recycled stock)
Electrical Engineer

3.  Conceptualized, designed, estimated costs, let bids and supervised
contract labor on capital and maintenance projects.
1980 - 1985 Public Service Indiana Princeton, Indiana
(Coal fired power plant)
Production Engineer
 Supervised craft labor on maintenance and capital projects, implemented
capital projects, provided troubleshooting assistance to maintenance and
operations departments.
 Assisted mechanical engineer in setting up a predictive maintenance
program for all critical rotating machines using vibration and oil analysis.
Education PURDUE UNIVERSITY – West Lafayette, Indiana
B.S. Electrical Technology, 1979