Jim Beane is a principal electrical engineer with over 22 years of experience in various industries such as chemical, food and beverage, government, and aviation. He has extensive experience performing electrical design, project management, commissioning, and start-up support. Some of his duties include electrical design, PLC programming, quality assurance, code compliance, and serving as the lead engineer on multiple process improvement projects.

1. Jim Beane is a principal electrical engineer, experienced in a wide
variety of industries including chemical and petrochemical, food and
beverage, agricultural, government, and aviation industries. During his
career, Jim served as electrical department discipline manager, senior
electrical design engineer, project manager, group leader, and project
start-up and test engineer.
Duties Jim has performed include:
Electrical Department Oversite
Electrical Design Team Lead (Power & Control)
Quality Assurance Checks
Member of Company Standards Committee
PLC code creation
ASi, Device Net, Profibus
Commissioning/start-up support
Electronic design and test
Power and lighting calculations and design
Arc flash studies
Special systems design
Lightning protection and grounding design
Electrical code compliance
Emergency power system calculation and design
Electrical construction supervision
Experience
AECOM Experience:
Anheuser-Busch InBev, Chicago, IL
EI&C Lead [Spent Grains, Brewhouse & Filtration Upgrades]
Lead electrical engineer for project associated with Goose Island
Brewery Upgrades. Duties included power and control design for new
process equipment installation and building additions. Field
investigation, schematic diagrams, Loops, panel schedules, plan
drawings, single line diagrams, heat trace design, EI&C scope of work
and construction support.
Anheuser-Busch InBev, Fairfield, CA
EI&C Lead [Syrup Unloading & Storage Addition]
Lead electrical engineer for project associated with plant Process
Upgrades. Duties included power and control design for new process
James Beane, PE
Principal Electrical Engineer
Areas of Expertise
 Process Electrical Design
 Process Control Design
 Building Services Design
 Construction Support
 Start-Up/Commissioning
 Electrical Code Compliance
Education
BS in Electrical Engineering,SIUE
MS in Electrical Engineering,SIUE
Licenses/Registrations
Registered Professional Engineer:
Missouri [2004000764]
Nebraska [E-12196]
Michigan [6201055257]
Minnesota [47861]
Illinois [62061534]
Georgia [035166]
California [19603]
Virginia [402051726]
North Carolina [040079]
Wisconsin [43162-6]
Texas [114842]
Ohio [E-78792]
Colorado [0049112]
Years of Experience
With AECOM 6 Years
With Other Firms 16 Years

2. AECOM James Beane, P.E.
Page 2 of 10
equipment installation and building additions. Field investigation,
schematic diagrams, Loops, panel schedules, plan drawings, single line
diagrams, Title 24 Documentation, EI&C scope of work and construction
support.
General Motors Corp, Wentzville, MO
EI&C Lead [Parking Lot Expansion and Main Gate Modifications]
Lead electrical engineer for project associated with plant Haul Lot
Expansion. Duties included power and control design for new area
lights, guard shack area upgrades and security system upgrades. Panel
schedules, lighting plans, EI&C scope of work and construction support.
Anheuser-Busch InBev, Fairfield, CA
EI&C Lead [Parking Lot Expansion]
Lead electrical engineer for project associated with plant Truck Lot
Expansion. Duties included power and control design for new area lights
and security system installation. Panel schedules, lighting plans, EI&C
scope of work and construction support.
Anheuser-Busch InBev, Houston, TX
EI&C Lead [Enzyme Injection Expansion]
Lead electrical engineer for project associated with plant Process
Upgrades. Duties included power and control design for new process
equipment installation. Field investigation, new IOC Panel drawings,
schematic diagrams, Loops, panel schedules, plan drawings, single line
diagrams, EI&C scope of work and construction support.
Anheuser-Busch InBev, Fairfield, CA
EI&C Lead [Enzyme Injection Expansion]
Lead electrical engineer for project associated with plant Process
Upgrades. Duties included power and control design for new process
equipment installation. Field investigation, schematic diagrams, Loops,
panel schedules, plan drawings, single line diagrams, EI&C scope of
work and construction support.
Anheuser-Busch InBev, Los Angeles, CA
EI&C Lead [Enzyme Injection Expansion]
Lead electrical engineer for project associated with plant Process
Upgrades. Duties included power and control design for new process
equipment installation. Field investigation, schematic diagrams, panel
schedules, plan drawings, single line diagrams, EI&C scope of work and
construction support.
Anheuser-Busch InBev, Ft. Collins, CO
EI&C Lead [Enzyme Injection Expansion]
Lead electrical engineer for project associated with plant Process
Upgrades. Duties included power and control design for new process
equipment installation. Field investigation, schematic diagrams, Loops,
panel schedules, plan drawings, single line diagrams, EI&C scope of
work and construction support.
SAB MillerCoors, Milwaukee, WI
EI&C Lead & Electrical Engineer of Record [Hot Water System
Upgrade]
Lead electrical engineer for project associated with plant Utilities
Upgrades. Duties included power and control design for new process
equipment installation. New IOC panel design, schematic diagrams,

3. AECOM James Beane, P.E.
Page 3 of 10
Loops, panel schedules, plan drawings, single line diagrams, arc flash
coordination, EI&C scope of work, cost estimating support and sequence
of operation support.
Anheuser-Busch InBev, Jonesboro, AR
EI&C Lead [Rice Plant Upgrades]
Lead electrical engineer for project associated with plant Process
Upgrades. Duties included power and control design for new process
equipment installation. Field investigation, new IOC panel design,
schematic diagrams, Loops, panel schedules, plan drawings, single line
diagrams, area classification drawing and EI&C scope of work.
GSA, St. Louis, MO
EI&C Field Audit Team Lead [Electric Vault Inspections]
Lead electrical inspection engineer for the electrical vault study of
several government owned buildings located in north St. Louis. Duties
included inspection of approximately 20 electrical vaults to note electrical
safety and NEC code violations. Violations were then given a priority
ranking and compiled into a status report for GSA use. The field team
undertook an extensive field investigation and the created a final report
to provide GSA with a comprehensive list of deficiencies. Each
deficiency was given a condition level, recommended corrective action
with rough order of magnitude cost.
SAB MillerCoors, Eden, NC
EI&C Lead & Electrical Engineer of Record [Steam System
Upgrades]
Lead electrical engineer for project associated with plant Utilities
Upgrades. Duties included power and control design for new process
equipment installation. Field investigation, new IOC panel design,
schematic diagrams, Loops, panel schedules, plan drawings, single line
diagrams, heat trace design, arc flash coordination, EI&C scope of work,
cost estimating support, sequence of operation support and
commissioning/start-up support.
SAB MillerCoors, Ft. Worth, TX
EI&C Lead & Electrical Engineer of Record [Deaerator System
Expansion]
Lead electrical engineer for project associated with plant Utilities
Upgrades. Duties included power and control design for new process
equipment installation. Field investigation, schematic diagrams, Loops,
panel schedules, plan drawings, single line diagrams, EI&C scope of
work, cost estimating support, sequence of operation support and
commissioning/ start-up support.
SAB MillerCoors, Irwindale, CA
EI&C Lead & Electrical Engineer of Record [Diluent Water System
Upgrades]
Lead electrical engineer for project associated with plant Utilities
Upgrades. Duties included power and control design for new process
equipment installation. Field investigation, new IOC panel design,
schematic diagrams, Loops, panel schedules, plan drawings, single line
diagrams, arc flash coordination, construction scope of work, cost
estimating support, and sequence of operation support.

4. AECOM James Beane, P.E.
Page 4 of 10
Previous Work Experience:
Molycorp Chemical Corporation, Mt. Pass, CA,
EI&C Group Manager & Electrical Engineer of Record [Plant
Expansion]
Project consisted of a large, multi-building chemical plant expansion.
Duties included oversite of approximately 24 engineers and designers in
a fast paced multiple bid package design effort. Designed and developed
the building services, power systems, instrumentation and control
drawings for five multi story process buildings, eight electrical buildings
and pipe bridge/utility corridor coordination. Project deliverables included
plan drawings, schematics, loops, panel schedules, cable schedules,
interconnection diagrams, single lines, and EI&C scope of work.
Instrument engineers specified and ordered over 2000 instruments.
Ameren UE, St. Louis, MO,
Lead Electrical Engineer [CTG Automation Study]
Served as electrical project engineer for creation and submittal of
feasibility study and cost assessment for the remote monitoring and
partial automatic control of off-site combustion turbine generators.
Extensive field investigation and client interviews to develop a cost
estimate and feasibility report for the automation and remote
monitoring/control of varying types of combustion turbine generators at
up to 15 sites in rural Missouri and Southern Illinois.
Croda Chemical Corporation, New Castle, DE,
Lead Electrical Engineer [Laboratory Upgrades]
Served as the lead engineer on a lab modernization project. Electrical
work included addition of new electrical panels, RTU, power for new and
relocated lab casework and new lighting.
Sunoco Chemical, Philadelphia, PA,
Lead Electrical Engineer [Laboratory Upgrades]
Served as lead engineer on a lab modernization project. Electrical work
included addition of new electrical panels, RTU, power for new and
relocated lab casework and new lighting.
Boeing, St. Charles, MO,
Lead Electrical Engineer [Warehouse Upgrades]
Served as lead electrical engineer for several warehouse upgrades on
the St. Charles campus. Responsible for electrical project documents
including drawing package, scope of work and Division 16 specifications.
Work included lighting design, equipment relocation power requirements,
and electrical panel replacement.
Granite City Steel, Granite City, IL,
Owner’s Representative [Project Complete Field Audit]
Served as owner’s representative in finished project inspection and as-
building the drawing package for Benzyne Monitoring Upgrades.
General Motors, Warren, MI,
Lead Electrical Engineer [Design Build Fuel Fill]
Lead electrical engineer for 30% submittal of electrical design drawings,
cost estimate and design narrative. Project included an automatic fuel fill
system with gasoline storage tanks, pumps and automated dispensing
system.

5. AECOM James Beane, P.E.
Page 5 of 10
General Motors Fuel Fill, Warren, MI,
Lead Electrical Engineer [Design Build Vehicle Test Area]
Electrical design drawings, cost estimate and design narrative. Project
included a vehicle test booth with pit located hydraulic pistons,
soundproofing and control room. Four separate locations were included
in the initial design.
US Steel, Great Lakes Works Detroit, MI
Owner’s Representative [Project Scoping]
Served as owner’s representative in front end project scoping and
estimating for several plant upgrades in the Blast Furnace area.
US Steel, Midwest Plant Gary, IN
Owner’s Representative [Annealing Area Control Upgrade]
Served as lead EI&C engineer on small controls project associated with
gas shutoff valves in the annealing area of the plant. Performed field
survey, developed drawing package and construction scope of work for
the addition of five (5) emergency stop stations and three (3) control
stations. Developed interconnect diagram, control station layout and
BOM, schematic diagrams, photo sketch’s and cable schedule.
General Motors, Warren, MI,
Electrical Project Engineer [Fuel Fill Upgrades]
Feasibility study and cost assessment for the remote monitoring and
partial automatic control of off-site combustion turbine generators.
Extensive field investigation and client interviews to develop a cost
estimate and feasibility report for the automation and remote
monitoring/control of varying types of combustion turbine generators at
up to 15 sites in rural Missouri and Southern Illinois.
FOOD & BEVERAGE
Wrigley, Chattanooga, TN,
Lead Electrical Project Engineer [Packaging Line Upgrades]
Electrical design for candy line relocation from Canada to existing
Tennessee plant. Work included demolition of equipment and as-building
of existing plant electrical panels. Responsible for electrical project
documents including plan drawings for relocated production equipment,
1-line diagrams, panel schedules and electrical scope of work. Work
included extensive field investigation to obtain existing electrical
conditions, electrical demolition drawings associated with existing
packaging lines, updated lighting and power plans for relocated
equipment and updated communication drawings.
Kraft Foods, Davenport, IA
Lead Electrical Project Engineer [Plant Expansion]
Project work included the demolition of existing four story building and
the addition of a new two story building and four story addition to existing
two story building. Work included extensive field investigation, upgrades
to the electrical panels, lighting design, heat trace design, and power
system design for the new manufacturing additions. Responsible for
electrical design and project documents including Scope of Work, Div. 16
specifications, and drawing package.

6. AECOM James Beane, P.E.
Page 6 of 10
ACH Foods, Jacksonville, IL,
Lead Electrical Engineer [Plant Capacity Expansion]
Plant Modification project for plant automation upgrades and facility
expansion. Responsible for electrical project documents including plan
drawings for new building addition, control schematics, and electrical
scope of work. Field investigation to obtain existing electrical conditions,
electrical demolition drawings associated with tank relocations, creation
of grounding, lighting and power plans for new Truck Unloading Building,
new feeder for new MCC, panel layout drawings for the addition of two
PLC panels, creation of instrument index for addition of control valves
and flow meters, control schematics and communication drawings.
Anheuser-Busch, St. Louis, MO
Electrical Engineer [Packaging Upgrades]
Anheuser-Busch Warehouse upgrades to Grid System. Project work
consisted of conversion of manual control to PLC control of 13 Grid Cars.
Duties included PLC programming, construction support and system
commissioning and start-up.
Anheuser-Busch, Houston, TX
Electrical Engineer [Packaging Line Installation]
Design, install and commission two bottle lines. Construction support and
coordination of equipment vendors and electrical contractor to facilitate
the commissioning of bottle line 8 and 9. Responsible for programming
of Allen-Bradley PLC based control system and device net field devices.
Anheuser-Busch, St. Louis, MO
Lead Electrical Engineer [Office Building Renovations]
Office renovations of six stories of the world headquarters building and
two stories in the engineering building on the St. Louis campus. Worked
with architects to remove office space and return areas to open office
environments. Responsible for electrical project documents including
drawing package and scope of work. Tasks included extensive field
investigation to obtain existing electrical conditions.
Anheuser-Busch, St. Louis, MO
Lead Electrical Engineer [Packaging Modernization]
Can Line 69 Grid Car Replacement for grid car replacement and
conveyor modifications. Responsible for electrical project documents
including drawing package and scope of work. Work included extensive
field investigation to obtain existing electrical conditions, detailed power
plans and control schematic modifications.
Anheuser-Busch, St. Louis, MO
Lead Electrical Engineer [Packaging Modernization]
Bottle Line 36 grid car replacement and conveyor modifications. Work
included field investigation to obtain existing electrical conditions,
detailed power plans and control schematic modifications.
Anheuser-Busch, St. Louis, MO
Lead Electrical Engineer [Packaging Upgrades]
Bottle Line 34 Team Room for facility upgrades. Extensive field
investigation to obtain existing electrical conditions, detailed demolition
drawings, power, lighting, voice, data, and fire alarm system additions.

7. AECOM James Beane, P.E.
Page 7 of 10
Anheuser-Busch, St. Louis, MO
Lead Electrical Engineer [Packaging Upgrades]
Bottle Line 36 Team Room Facility Upgrades. Work included extensive
field investigation to obtain existing electrical conditions, detailed
demolition drawings, power, lighting, voice, data, and fire alarm system
additions.
Anheuser-Busch, St. Louis, MO
Lead Electrical Engineer [Packaging Upgrades]
Anheuser-Busch Bottle Line 33 Soaker Modifications for removal of
Soaker System on Bottle Line 33. Included extensive field investigation
to obtain existing electrical conditions, detailed demolition drawings,
power plan upgrades, one-line diagram and control schematic
modifications.
Anheuser-Busch, Merrimack, NH
Lead Electrical Engineer [Facilities Upgrades]
Anheuser-Busch Lab Upgrade Project, Merrimack, New Hampshire for
facility upgrades. Through field investigation, obtained existing electrical
conditions, detailed power layout for lab instrumentation and casework
limitations, lighting design, gas alarm system, fire alarm system,
upgrades to the data communications room and electrical panel
upgrades.
Anheuser-Busch, St. Louis, MO
Lead Electrical Engineer [Facility Upgrades]
St. Louis Brewery laboratory upgrades project. Obtained existing
electrical conditions, detailed power layout for lab instrumentation and
casework limitations, lighting design, oxygen sensing system, fire alarm
system, elevator conversion and electrical panel upgrades.
Anheuser-Busch, Ft. Collins, CO
Electrical Engineer [Brewery Expansion]
Fort Collins Brewery Fermenting Cellar Upgrade and Power House
Expansion. Work included electrical modifications for the addition of two
Carbon Filters, one Degasifier, and upgrades to the NH3, CO2, and hot
water systems. Drawing package consisted of demolition drawings,
Allen-Bradley PLC schematics and I/O mapping, heat trace design,
instrumentation/loop drawings and power system design. Also served as
a member of electrical project team for the Fermenting Cellar expansion.
Anheuser-Busch, St. Louis, MO
Lead Electrical Engineer [Utilities Upgrades]
St. Louis Brewery Power House Upgrade/Expansion. Work included
electrical modifications for the addition of two Carbon Filters, one
Degasifier and upgrades to the CO2, and hot water systems.
Responsible for partial electrical design including power system design,
heat trace design, and plan drawings.
Sara Lee, Meridian, MI,
Lead Electrical Engineer [Packaging Expansion]
Meridian Mississippi facility expansion project. Responsible for electrical
project documents including drawing package and scope of work. Work
included detailed power, grounding and lighting plans, 1-line diagrams
and motor control schematics.

8. AECOM James Beane, P.E.
Page 8 of 10
AGRICULTURE
Anheuser-Busch, Inc., Manitowoc, WI,
Lead Electrical Design Engineer [Power Distribution Upgrades]
Malt Plant Electrical Upgrade project. Work included new 15KV feed
from local utility, new medium voltage pad mount switchgear,
replacement of four 480V unit substations, and upgrades to select
electrical panels.
Monsanto Company, Constantine, MI,
Lead Electrical Design Engineer [Seed Corn Plant Expansion]
Seed Corn Facility Expansion project in Constantine, Michigan. Green
corn receiving expansion, husk/sort building expansion, yard conveyor
additions and modifications, the addition of a 28-bin dryer, 6 story sheller
and Bulk Storage building expansion. Work included field investigation,
electrical power design and coordination with a third party systems
integrator. Responsible for power & control plans, panel schedules, 1-
line diagrams and electrical drawing package.
Monsanto Company, Kearney, NE
Lead Electrical Design Engineer [Seed Corn Plant Expansion]
Seed Corn Facility Expansion project in Kearney, Nebraska, lead
electrical engineer for existing chopper modifications, green corn
receiving expansion, husk/sort building expansion, conveyor additions
and modifications, climate controlled warehouse expansion, truck scale
additions, the addition of a 20-bin dryer and 7 story sheller building and
Bulk Storage building. Work included extensive field investigation,
medium voltage utility upgrades, electrical power design and
coordination with a third party systems integrator. Responsible for power
& control plans, panel schedules, 1-line diagrams and electrical drawing
package.
GOVERNMENT
State of Missouri, Fulton, MO
Lead Electrical Engineer [Energy Audits]
State of Missouri Energy Audit, Fulton, Missouri: served as member of
energy audit team. Field survey of four separate multi building
campuses. Leader of 4 person lighting audit team that gathered data
during a 3 week field survey. Results from field survey led to the
development of numerous energy conservation methods recommended
to the State of Missouri.)
United States Department of Agriculture, St. Louis, MO
Lead Electrical Engineer [Building Upgrades]
USDA Space Consolidation Project, General Services Administration, St.
Louis, Missouri: served as lead electrical engineer in tenant finish of
several large office buildings at the Goodfellow campus. Responsible for
electrical project documents including drawing package, scope of work
and Division 16 and Fire Alarm specifications. Work included detail
design of server room, print room, web farm, emergency back-up system
with generator and several UPS systems. Office lighting design,
receptacle lay-out, new electrical panels, fire alarm system, card access
system, zoned public address system and phasing of the work.

9. AECOM James Beane, P.E.
Page 9 of 10
Air National Guard, Pittsburg, PA
Lead Electrical Engineer [Building & Main Gate Upgrades]
Facilities Upgrade, Pennsylvania Air National Guard on the Main Gate
and Building 300 Training Facility Upgrades. Responsible for electrical
project documents including drawing package, scope of work and
Division 16 specifications. Work included roadway lighting design,
automated gate control system, hydraulic control system for vehicle
barriers, and new HVAC system powerClient Name, Project Title, Project
Location (Role). Start typing description of project – focus on
responsibilities on project.
Air National Guard, Selfridge, MI
Lead Electrical Engineer [Medical Building Design & Development]
Joint Medical Training Facility, Air National Guard. Initial design and cost
estimate for new facility. Work included attending project Charette,
building electrical load estimate, extensive field investigation of site
conditions for power and communications, and electrical Tab A design
narrative.
Air National Guard, Newport, RI
Electrical Engineer [Construction Support]
Operations Building and C-140 Hanger, Rhode Island Air National
Guard. Work included assisting in electrical design, answered RFI’s and
providing final walk through and electrical punch list for both buildings.
Air National Guard, Fort Leonard Wood, MO
Lead Electrical Engineer [Construction Support]
Black Hawk Hanger and Operations building. Work included partial shop
drawing review and addressed RFI’s. Extensive on-site interfaced with
electrical contractor as construction progressed to address concerns and
design omissions.
Commercial
Alton Memorial Hospital, Alton, IL
Lead Electrical Engineer [Imaging Floor Upgrades]
Served as lead electrical engineer for several imaging room upgrades.
Responsible for electrical project documents including drawing package,
scope of work and Division 16 specifications. Work included field audit of
existing panels, demolition of existing imaging equipment, remodel of
suite including new lighting design, receptacle layout, and electrical
panel as builds.)
Monsanto Corp, St. Louis, MO
Lead Electrical Engineer [Office Building Upgrades]
Served as lead electrical engineer for several office building upgrades at
the Olive Blvd campus. Responsible for electrical project documents
including drawing package, scope of work and Division 16 specifications.
Work included lighting design, receptacle layout, and electrical panel
replacements.
Parkway School District, St. Louis, MO
Lead Electrical Engineer [Bellerive Elementary School Upgrades]
Served as lead electrical engineer for HVAC replacement project. Work
included 100% electrical design drawings, cost estimate, specifications
and design narrative. Project included panel replacements, stage and
cafeteria lighting and demolition of existing hot water system.

10. AECOM James Beane, P.E.
Page 10 of 10
Parkway School District, St. Louis, MO
Lead Electrical Engineer [Fern Ridge High School Upgrades]
Served as lead electrical engineer for HVAC replacement project. Work
included 100% electrical design drawings, cost estimate, specifications
and design narrative. Project included panel replacements, stage,
kitchen, computer room and cafeteria lighting and re-routing rooftop
conduits through building. A new weather head service entrance was
provided.
General Services Administration (GSA), Champlain, NY
Review Team Engineer [US Land Port of Entry Expansion]
Served as as a member of the review team, responsible for the electrical
quality assurance review on behalf of the owner. Reviewed third parties
electrical drawings, calculations, design narrative, and specifications.
Verified electrical design package adhered to the National Electric Code,
established practices, and GSA guidelines. Project consisted of a Cargo
Warehouse; Processing Buildings with Brokerage Area; HAZMAT
Containment Facilities; Veterinary Service Building; Commercial Primary
Inspection Building; Export Control Building; Commercial Primary
Queuing Booths; Passenger Vehicle Inspection Plaza; Secondary
Inspection Garage; Administration Building; Roadways; and Parking
Areas.
Washington Metro Transit Authority, Washington, DC
Lead Electrical Engineer [Train Maintenance Building Upgrades]
Served as Lead Electrical Engineer for creation of design/build
documents at Greenbelt Yard Facility. The 177,500-square-foot (16,490-
square-meter) Greenbelt Yard buildings were modified to accommodate
heavy maintenance. A new 72,000-square-foot (6,690-square-meter)
building was added at Greenbelt to house maintenance functions, offices
and labs moved from Brentwood. This was part of a $10.7 billion
program involving traction power upgrades, train control upgrades, and
additions and alterations at three yards to expand maintenance and shop
capacity for the larger fleet size.
Military Experience
United States Navy Veteran (1978-1981), specialized in Aviation
Electronics. US Navy Reserves (1981-1984 & 1988-1991).
Contact Information
AECOM
1001 Highlands Plaza Drive West
Suite 300
St. Louis, MO 63110
Tel: 314.450.4824
Fax: 314.429.0462
Email: james.beane@aecom.com