Dear Friends
I am MEP Draftsman/ Junior Design Engineer and i am also available for part time/freelancer work. For any kind of above said work you can contact me.
Thanks & Best Regards
We provide mechanical, electrical, and plumbing (MEP) engineering design services all under one roof. With our technical expertise and multidisciplinary approach to building services design we can bridge the gap between the requirements of the client and efficiency of planning.
Our team is equipped to handle project of all sizes. We have a varied platter of project, from Hospitality, Malls, IT Parks, Commercial Towers, High Rise Residential Towers, Residential Townships, Sports Complex and Mixed use buildings. Our scope included concept, feasibility study, master planning, design services, contract preparation, site visits and implementation up to commissioning.
The latest IES Faculty event took place in London on 24th September, 2014. The seminar, which was part of World Green Building Week, focused on the issue of the Performance Gap, with our aim being to engage and work with the industry to diminish the difference between the expected and actual energy performance of buildings.
We provide mechanical, electrical, and plumbing (MEP) engineering design services all under one roof. With our technical expertise and multidisciplinary approach to building services design we can bridge the gap between the requirements of the client and efficiency of planning.
Our team is equipped to handle project of all sizes. We have a varied platter of project, from Hospitality, Malls, IT Parks, Commercial Towers, High Rise Residential Towers, Residential Townships, Sports Complex and Mixed use buildings. Our scope included concept, feasibility study, master planning, design services, contract preparation, site visits and implementation up to commissioning.
The latest IES Faculty event took place in London on 24th September, 2014. The seminar, which was part of World Green Building Week, focused on the issue of the Performance Gap, with our aim being to engage and work with the industry to diminish the difference between the expected and actual energy performance of buildings.
• B.Tech (Electronics & Instrumentation Engineering) with more than +5 years of experience in Design Engineering and Project Execution.
• Adept in Project co-ordination & documentation of all related drawing, data sheets, QAP’s, Field reports, JHA’s, Hook-up diagrams, BOM etc.
• Fair understanding of the aspects of Design & Development Processes, Drafting and Customer Relationship Management
• Adept in handling commissioning activities involving resource planning and co-ordination with internal / external departments/ clients/ vendors.
• Understanding in executing cost saving techniques/measures and modifications to achieve substantial reduction in O&M expenditures and work within the budget
• An effective communicator, hard worker with good interpersonal, problem solving and presentation skills
NASA Net Zero Roadmap: Federal Utilities Partnership Working Group, November ...Shanti Pless
A summary presentation of NASA's Net Zero Roadmap. The roadmap, available at http://www.nrel.gov/docs/fy15osti/60838.pdf, provides strategic, operational, and tactical level proficiencies necessary for NASA to implement to successfully reach net zero by 2020. Slides posted at FUPWG's site at http://energy.gov/eere/femp/downloads/fupwg-fall-2014-agenda-and-presentations.
Building complaince with the energy efficiency measures in the building code of Autralia can be a little daunting to understand. This presentation provides a structured approach and sets out the contents of acheiving compliance with BCA Section J, using the JV3 verification method. The JV3 method provides greater freedom in the desing process, can generally result in lower construction costs, lower energy costs and more comfortable buildings when used appropriately.
IES World Green Building Week Faculty Event IES VE
IES hosted a free IES Faculty session on Tuesday 18th September in central London to celebrate World Green Building Week 2012. The seminar was titled “Virtual Building Models: Driving Measurable Change for Sustainable Built Environments”
Part 1 of this presentation covers:
- Interoperability: IFC / Sketch-Up
- Management: IES TaP
- TSB Project: Optimise
Part 2 of this presentation covers:
- TSB Project: IMPACT
- Daikin VRV
- Monodraught Windcatcher
View a video of the event here: http://www.youtube.com/watch?v=O6N5Bzw3D8Q&list=UUjCPI969e4Hb11RSgzlHf4Q&index=2&feature=plcp
Case study of ms1525 energy efficiency and renewable energy code of practice.Steve Lojuntin
Paper presented at the seminar in Kuala Lumpur on 12 September 2019. "Achieving Sustainable Development Goals Through The Application of MS1525 : Code of Practice – Energy Efficiency & Use of Renewable Energy for Non-residential Buildings".
Low Carbon Building in Malaysia (update 2014) @ bcckSteve Lojuntin
Low Carbon Building in Malaysia 2014 was presented at the Green Buildings & Parks World 2014 @ Borneo Convention Centre Kuching Sarawak.
An update of some info on affordable green building system .
2012 07 Low Carbon Green Building Performance DesignSteve Lojuntin
Low Carbon Green Building system to support the Malaysian Green Performance Assessment System for buildings (GreenPASS) and some government low carbon building projects that I had done.
• B.Tech (Electronics & Instrumentation Engineering) with more than +5 years of experience in Design Engineering and Project Execution.
• Adept in Project co-ordination & documentation of all related drawing, data sheets, QAP’s, Field reports, JHA’s, Hook-up diagrams, BOM etc.
• Fair understanding of the aspects of Design & Development Processes, Drafting and Customer Relationship Management
• Adept in handling commissioning activities involving resource planning and co-ordination with internal / external departments/ clients/ vendors.
• Understanding in executing cost saving techniques/measures and modifications to achieve substantial reduction in O&M expenditures and work within the budget
• An effective communicator, hard worker with good interpersonal, problem solving and presentation skills
NASA Net Zero Roadmap: Federal Utilities Partnership Working Group, November ...Shanti Pless
A summary presentation of NASA's Net Zero Roadmap. The roadmap, available at http://www.nrel.gov/docs/fy15osti/60838.pdf, provides strategic, operational, and tactical level proficiencies necessary for NASA to implement to successfully reach net zero by 2020. Slides posted at FUPWG's site at http://energy.gov/eere/femp/downloads/fupwg-fall-2014-agenda-and-presentations.
Building complaince with the energy efficiency measures in the building code of Autralia can be a little daunting to understand. This presentation provides a structured approach and sets out the contents of acheiving compliance with BCA Section J, using the JV3 verification method. The JV3 method provides greater freedom in the desing process, can generally result in lower construction costs, lower energy costs and more comfortable buildings when used appropriately.
IES World Green Building Week Faculty Event IES VE
IES hosted a free IES Faculty session on Tuesday 18th September in central London to celebrate World Green Building Week 2012. The seminar was titled “Virtual Building Models: Driving Measurable Change for Sustainable Built Environments”
Part 1 of this presentation covers:
- Interoperability: IFC / Sketch-Up
- Management: IES TaP
- TSB Project: Optimise
Part 2 of this presentation covers:
- TSB Project: IMPACT
- Daikin VRV
- Monodraught Windcatcher
View a video of the event here: http://www.youtube.com/watch?v=O6N5Bzw3D8Q&list=UUjCPI969e4Hb11RSgzlHf4Q&index=2&feature=plcp
Case study of ms1525 energy efficiency and renewable energy code of practice.Steve Lojuntin
Paper presented at the seminar in Kuala Lumpur on 12 September 2019. "Achieving Sustainable Development Goals Through The Application of MS1525 : Code of Practice – Energy Efficiency & Use of Renewable Energy for Non-residential Buildings".
Low Carbon Building in Malaysia (update 2014) @ bcckSteve Lojuntin
Low Carbon Building in Malaysia 2014 was presented at the Green Buildings & Parks World 2014 @ Borneo Convention Centre Kuching Sarawak.
An update of some info on affordable green building system .
2012 07 Low Carbon Green Building Performance DesignSteve Lojuntin
Low Carbon Green Building system to support the Malaysian Green Performance Assessment System for buildings (GreenPASS) and some government low carbon building projects that I had done.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
2. Summary
A highly self-motivated & organized, detail-oriented,
conscientiousself-starter, able to strategize & prioritize
effectively to accomplish multipletasks and stay calm under
pressure, also can work for long hours, if situation demands.
StrongTeam leadership and Management Skills. Ability to
work in a collaborative and diverse team environment. To work
in sophisticated and multinational environment with a view to
expand my knowledge horizon and to serve National and
International communities and organizations.
3. Experience
MEP DRAFTSMAN at Anhui Arabest Contracting L.L.C
June 2014 - June 2016 (2 years 1 month)
=>Preparation of Electrical Drawings.
1-Electrical Lighting
2-Electrical Power High Level & Low Level
3-Electrical Containment
4-Emergency & Exit Lighting System
5-Fire Alarm
6-Security System
7-Telephone & Data
8-SMATV System
9-Lightning Protection System
4. =>Preparation Of Fire Fighting Drawings.
=>Preparation Of Fire Strategy Drawings.
=>Preparation Of Drainage Drawings.
=>Preparation Of Water Supply Drawings.
=>Preparation Of HVAC System Drawings.
•Preparation of Shop Drawings.
•Rectifying of drawing due to Coordination of
M.E.P. actual work at site.
•Preparing Schematic/Single Line Diagram for
all disciplines.
5. •Working on MEP coordination drawing (Underground & above false ceiling, reflected ceiling
coordination).
•For the As built drawings visit the site and prepare the as built drawing according to site
work.
•Follow the QA/QC instruction for quality and standard the drawings.
•Preparing Sketches for Request for information (RFI).
•Issuing the latest drawing for site, and coordinating with Project engineer, site engineer and site
foreman.
•Working on drainage & water supply shop drawings.
•Working on MEP coordination drawing (above false ceiling & reflected ceiling coordination
ground floor).
•Rectifying of drawing due to Coordination of Architectural, Structural, and Mechanical, Electrical
Shop
Drawings.
•Preparation of Electrical Load Schedule .
•Project Planning.
•Material Estimation.
•Preparation Of MEP Materials List.
•Preparation of Coordination Design Included All Disciplines.
•Manage and Supervise Site Activities.
6. Associate Engineer at Kundian Chemical Industries
October 2009 - October 2013 (4 years 1 month)
DUTIES AND RESPONSIBILITIES:
RADIOGRAPHIC INTERPRETATION OF DIFFERENT TECHNIQUES (DWSI, DWDI, SWSI,
PANORAMIC)
RADIOGRAPHIC TESTING OF WELD JOINTS BY X-RAY.& GAMMA RAY Radio Graphic FILM
PROCESSING
DYE-PENETRANT AND MAGNETIC PARTICLE TESTING OF VARIOUS TYPES OF WELDING
/ CASTING/FORGING/ROLLING ETC.
TENSILE TESTING AND COMPRESSION TESTING OF DIFFERENT MATERIALS AND
WELDING VISUAL INSPECTION WELD JOINTS AS PER STANDARDS ASME SEC-V.
BOILER INSPECTION TECHNICAL REPORT WRITING
PROCEDURE WRITING ACCORDING TO CODES AND SPECIFICATIONS FAMILIARITY WITH
INTERNATIONAL STANDARDS I.E., ASME, ASNT & AWS. FULL CAPABILITY OF MATERIAL
CONTROL & INVENTORY
PIPING INSPECTION
EVALUATION OF WELDING QUALITY CORROSION PREVENTION METHOD
7. STANDARD CATHODIC PROTECTION
POTENTIAL OF WORKING AT HIGH EVALUATION
PNEUMATIC TESTING / HYDROSTATIC TESTING / HYDRAULIC TESTING RESULT
ORIENTED WITH SURFACE ROUGHNESS METER
QUALIFY AND CERTIFY WELDING PROCEDURE SPECIFICATIONS (WPS), PROCEDURE
QUALIFICATION RECORDS (PQR) AND WELDER PERFORMANCE QUALIFICATION (WPQ)
AS PER DIFFERENT AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) AND
AMERICAN WELDING SOCIETY (AWS) CODES
WITNESS VARIOUS INSPECTION POINTS FOR WELDING
QUALIFY WELDERS AND PROCEDURES IN THE USE OF ARC WELDING E.G. GTAW, SMAW
USING ASME SEC-9, AWS-D1.1
MATERIAL ANALYSIS (BY ALLOY ANALYZER X-MET 3000)
REVIEW OF TEST PACKAGES AND RELEASE THE LINES FOR HYDRO TEST
CONDUCT PUNCH LISTING PRIOR TO HYDRO TESTING OF PIPELINES. WITNESS AND
APPROVE PRESSURE TEST AND LOOP PACKAGES PRIOR TO MECHANICAL COMPLETION
REVIEW TEST CERTIFICATES, REPORTS & OTHER DOCUMENTS
REVIEW OF RADIOGRAPHS, WITNESSING OF NON-DESTRUCTIVE TESTING DAY TO DAY
PLANNING AND CO-ORDINATION OF QA & QC ACTIVITIES
AWARE OF CODES & STANDARDS IN ASME SECTION, III, V, VIII, IX, ASME B31.1, ASME
B31.3, AWS D1.1, API 510 & 570.
LEAK TESTING (VACCUME BOX TECHNIQUE). ULTRASONIC TESTING
DOCUMENTATION OF QA/QC DEPARTMENT
SUPERVISION OF ALL QUALITY CONTROL & QUALITY ASSURANCE ACTIVITIES
8. Skills & Expertise
MicroStation
Auto CAD (2D & 3D)
Autodesk Revit
Computer Programming In Softwares
MS-DOS
MS-WORD
MS-Excel
MS-Power Point
Microsoft Project T.T.6
Window Treatments
Windows
Web Design
Inpage Urdu
Correl Draw
MS Access
Adobe Photo Shop
Adobe Premier
Ulead Video Studio
Home Designer Suite
Home Plan Pro 3D
Computer Hardware
3D Studio Max
10. Education
Pakistan Institute Of Modern Studies
Professional Diploma, (HRM) Human Resource
Management, 2010 - 2011
Activities and Societies: human resource
management
Lahore Board of Technical Education
Diploma of Associate Engineer (3 Years),
Mechanical Engineering, 2002 - 2005
Iqra Model High School & College
S.S.C, Science, 2000 - 2002
11. Courses
NDT Inspector Radio Graphic Testing NDT
Inspector Dye Penetrant Testing NDT Inspector
Magnetic Particles Testing