**Sila perbetulkan jika terdapat kesalahan dimana2 nota @ soalan saya. Semua nota dan latihan yang diupload hasil dr pengalaman saya menjadi guru sandaran di sekolah yang ditempatkan dan mungkin dari sumber yang saya kumpulkan di internet. Saya menerima segala teguran.
Rbt tingkatan 2 reka bentuk mekanikal 2.2.1Beela Sensei
RBT Tingkatan 2
**Sila perbetulkan jika terdapat kesalahan dimana2 nota @ soalan saya. Semua nota dan latihan yang diupload hasil dr pengalaman saya menjadi guru sandaran di sekolah yang ditempatkan dan mungkin dari sumber yang saya kumpulkan di internet. Saya menerima segala teguran.
**Sila perbetulkan jika terdapat kesalahan dimana2 nota @ soalan saya. Semua nota dan latihan yang diupload hasil dr pengalaman saya menjadi guru sandaran di sekolah yang ditempatkan dan mungkin dari sumber yang saya kumpulkan di internet. Saya menerima segala teguran.
Rbt tingkatan 2 reka bentuk mekanikal 2.2.1Beela Sensei
RBT Tingkatan 2
**Sila perbetulkan jika terdapat kesalahan dimana2 nota @ soalan saya. Semua nota dan latihan yang diupload hasil dr pengalaman saya menjadi guru sandaran di sekolah yang ditempatkan dan mungkin dari sumber yang saya kumpulkan di internet. Saya menerima segala teguran.
Easily share what happened during the past month with a beautiful presentation from Venngage. Bring attention to your accomplishments with graphs, charts, and engaging icons. With a presentation from Venngage your audience will be on the edge of their seats.
Easily share what happened during the past month with a beautiful presentation from Venngage. Bring attention to your accomplishments with graphs, charts, and engaging icons. With a presentation from Venngage your audience will be on the edge of their seats.
Easily share what happened during the past year with a beautiful presentation from Venngage. Bring attention to your accomplishments with graphs, charts, and engaging icons. With a presentation from Venngage your audience will be on the edge of their seats.
Easily share your biggest accomplishments with your audience using graphs, charts, and engaging icons. With a presentation from Venngage your audience will be on the edge of their seats.
The name of Athens, connected to the name of its patron goddess Athena, originates from an earlier Pre-
Greek language.
The etiological myth explaining how Athens acquired this name through the legendary contest between Poseidon and Athena was described by Herodotus, Apollodorus, Ovid, Plutarch, Pausanias and others.
Plato, in his dialogue Cratylus, offers his own etymology of Athena's name connecting it to the phrase ἁ θεονόα or hē theoû nóēsis (ἡ θεοῦ νόησις, 'the mind of god')
http://inarocket.com
Learn BEM fundamentals as fast as possible. What is BEM (Block, element, modifier), BEM syntax, how it works with a real example, etc.
Tips from Calvin and Hobbes on how to be a good customerFreshdesk Inc.
What could a careless, mischievous six year old possibly teach you about being a good customer? Well, not much really, but he can surely tell you a lot about what you should NOT do.
Here are a few things you can learn from Calvin about being a good customer.
For more tips on customer support, head over to the Freshdesk blog - http://blog.freshdesk.com/
How NOT to Run Your Company – Lessons LearnedWeekdone.com
The Internet is full of articles on „How to succeed“ and „How to build a great company“ But while following those guidelines we often forget that there's a lot you just can't do.
Learning from your own mistakes is good, but it's even better when you can learn from the mistakes of others.
Everyone's favorite billionaire and Republican presidential hopeful Donald Trump has said “Watch, listen, and learn. You can’t know it all yourself. Anyone who thinks they do is destined for mediocrity.”
Enjoy the slides and a sense of humor is advised.
The colours that dresses your brand are playing an important role in how they support this personality that you want to portray. Don’t panic when a colour speaks one thing, but in the relation to the brand it delivers a slightly different response.
Check out these examples of how brands used in conveying their message through branding and banner advertisement.
Read more http://www.bannersnack.com/blog/color-banner-design-inspiration/
Lightning Talk #9: How UX and Data Storytelling Can Shape Policy by Mika Aldabaux singapore
How can we take UX and Data Storytelling out of the tech context and use them to change the way government behaves?
Showcasing the truth is the highest goal of data storytelling. Because the design of a chart can affect the interpretation of data in a major way, one must wield visual tools with care and deliberation. Using quantitative facts to evoke an emotional response is best achieved with the combination of UX and data storytelling.
Clickbait: A Guide To Writing Un-Ignorable HeadlinesVenngage
We looked at some of the top performing content on social media, from some of the top publications on the web. From this, we were able to figure out the recipe for crafting a click-worthy title. Here is what we learned...
Dispatches From The New Economy: The Five Faces Of The On-Demand EconomyIntuit Inc.
From people determined to be their own boss, to those embracing the flexibility to do something they love, to workers finding a replacement for a traditional job – people working in the on-demand economy are just about as diverse as the labor market itself. A new report from Intuit Inc. and Emergent Research shows that there are a broad range of motivations – and differing levels of satisfaction – among five distinct groups of on-demand workers:
The Business Builders – primarily driven by the desire to be their own boss. They represent 22 percent of on-demand workers.
The Career Freelancers – happily building a career through independent work. They represent 20 percent of on-demand workers.
The Side Giggers – looking to find financial stability by supplementing existing income. They represent 26 percent of on-demand workers.
The Passionistas – looking for the flexibility to do something they love. They represent 18 percent of on-demand workers.
The Substituters – replacing a traditional job that is no longer available. They represent 14 percent of on-demand workers.
Methodology
A total of 4,622 workers who find work opportunities via the platforms provided by the participating partner companies completed an online survey between September 11 and October 1, 2015. The results were weighted to reflect the proportion of workers in each of the following segments: Drivers/Delivery, Online Talent Marketplaces and Field Service/Onsite Talent. The weights were developed using earlier survey work that sized the on-demand economy. The largest weighted share of on-demand worker respondents from any single company is 16%, with most partner companies providing less than 10% of the respondents.
Visit us at gykantler.com for more information.
The concept of a “brand” is no longer taboo at B2B companies. In fact, strong B2B brands outperform weaker ones by as much as 20%, according to recent research by McKinsey. Yet it’s not easy for ROI-obsessed marketers to justify spending money on their brand, which can be difficult to track. As a result, your brand is too often left either underfunded or on the back-burner altogether.
We’re going to help you solve this. In this presentation you’ll learn:
- How your brand can boost demand generation and other key performance indicators
- The elements of a B2B brand and how those are different from traditional consumer branding
- How to elevate your brand through B2B marketing channels and brand advocates
- Metrics to track the impact of your brand
10 Engagement Lessons Learned From 1 Million Survey AnswersD B
Officevibe released a research report called The State of Employee Engagement based on 1,200,000 survey answers from employees in 157 countries. After analyzing the data, we discovered some truly shocking statistics about the state of engagement across the world.
This actionable webinar will show you how you can keep your employees happy and productive.
See the recording of the webinar:
http://bit.ly/2gjJg3o
Get all the free bonuses and extra tips:
http://bit.ly/2g7Q3xM
Content by Officevibe, the simplest tool for a greater workplace.
What happens when the digital tools and platforms we make and use for communication and entertainment are hijacked for terrorism, violence against the vulnerable and nefarious transactions? What role do designers and developers play? Are we complicit as creators of these technologies and products? Should we police them or fight back? As Portfolio Lead for Northern Lab, Northern Trust's internal innovation startup focused on client and partner experience, Antonio will share a mix of provocative scenarios torn from today's headlines and compelling stories where activism and technology facilitated peace—and war.
As a call-to-action for designers and developers to engage in projects capable of transformational change, he'll explore the question: How might technology foster new experiences to better accelerate social activism and make the world a smarter, safer place?
Get Featured: So You Want to be on the Front Page of SlideShare?Venngage
After trying to figure out whether or not there is a secret formula for getting featured on the SlideShare homepage, we decided to ask 13 pros who have been featured on multiple occasions. We created this deck to share their insights with you!
Featuring tips from:
Robert Katai
Julius Solaris
Jen Jones
Sandra Jovanovic
Ross Simmonds
Michael Brenner
Joe Gelman
Steve Williamson
Stephen Jeske
Ayesha Ambreen
Josh Steimle
Eugene Cheng
Pamela Pavliscak
Read their full and in depth tips here: https://venngage.com/blog/get-featured-slideshare/
Nobody can discover the world for somebody else. Only when we discover it for ourselves does it become common ground and a common bond and we cease to be alone.”
The technologies and people we are designing experiences for are constantly changing, in most cases they are changing at a rate that is difficult keep up with. When we think about how our teams are structured and the design processes we use in light of this challenge, a new design problem (or problem space) emerges, one that requires us to focus inward. How do we structure our teams and processes to be resilient? What would happen if we looked at our teams and design process as IA’s, Designers, Researchers? What strategies would we put in place to help them be successful? This talk will look at challenges we face leading, supporting, or simply being a part of design teams creating experiences for user groups with changing technological needs.
1. REKA BENTUK
OBJEKTIIF/HASIL
PEMBELAJARAN BAGI TOPIK
INI.
2. • MENERANGKAN KONSEP DAN TUJUAN
MEREKABENTUK.
• MENYATAKAN ELEMEN-ELEMEN REKA BENTUK.
• MENYATAKAN ASPEK-ASPEK YANG PERLU
DIAMBILKIRA DALAM SETIAP ELEMEN REKA BENTUK.
• MENERANGKAN PROSES REKA BENTUK.
• MELAKUKAN PENYIASATAN UNTUK MENGUMPUL
MAKLUMAT-MAKLUMAT BAGI MENYELESAIKAN
MASALAH REKA BENTUK.
• MENYESUAIKAN PENGGUNAAN TEKNOLOGI DALAM
MENYELESAIKAN MASALAH REKA BENTUK.
• MENGAMBIL KIRA ASPEK-ASPEK BINAAN SEMASA
MEREKABENTUK.
• MEMILIH DAN MENGGUNAKAN BAHAN DAN PROSES
YANG PALING MURAH, MUDAH, DAN BERKESAN
3. • MEMILIH BAHAN YANG MEMPUNYAI SIFAT
SESUAI DENGAN SESUATU REKA BENTUK.
• MENGAMBILKIRA FAKTOR-FAKTOR ESTETIK DAN
ERGONOMIK DALAM REKA BENTUK.
• MEMILIH DAN MEMBUAT KEPUTUSAN YANG
SESUAI BERDASARKAN ASPEK DALAM SETIAP
ELEMEN UNTUK MENYELESAIKAN SESUATU
MASALAH REKA BENTUK.
• MENILAI DAN MENGANALISIS ELEMEN-ELEMEN
YANG DIPERTIMBANGKAN UNTUK SESUATU
PROSES MEREKABENTUK SERTA CADANGAN
PERUBAHAN UNTUK MEMPERBAIKI REKA
BENTUK TERSEBUT.
• MEREKABENTUK ARTIFAK UNTUK
MENYELESAIKAN SATU MASALAH YANG
4. • BERUSAHA MENGHASILKAN ARTIFAK YANG KREATIF.
• MENYATAKAN KAEDAH PEMBENTANGAN HASIL REKA
BENTUK.
• MEMBENTANGKAN HASIL REKA BENTUK DALAM
BENTUK DOKUMEN , PEMBENTANGAN DAN LISAN.
• MENILAI DAN MENGANALISIS ARTIFAK REKA BENTUK
YANG DIHASILKAN OLEH RAKAN SEKELAS DAN DAPAT
MENCADANGKAN CIRI-CIRI MEMPERBAIKI REKA
BENTUK TERSEBUT.
• MENILAI DAN MENGANALISIS ARTIFAK REKA BENTUK
YANG DIHASILKAN OLEH RAKAN SEKELAS DAN DAPAT
MENCADANGKAN PROSES KERJA DAN BAHAN YANG
DIGUNAKAN UNTUK MEMPERBAIKI REKA BENTUK
TERSEBUT .
5. PENGENALAN.
Dalam tajuk ini kita menyentuh
konsep, tujuan, elemen-elemen reka
bentuk dan merekabentuk dalam
reka bentuk. Ianya juga melibatkan
bagaimana kaedah-kaedah yang
perlu dilalui oleh pelajar dalam
membuat kerja kursus yang telah
ditetapkan oleh Lembaga
Peperiksaan.
6. BIDANG-BIDANG REKA BENTUK.
REKA BENTUK KEJURUTERAAN
– REKA BENTUK PRODUK
– Reka Bentuk Sistem
REKA BENTUK PERINDUSTRIAN
REKA BENTUK DALAMAN
REKA BENTUK TEKSTIL
REKA BENTUK GRAFIK/KOMPUTER
REKA BENTUK LANSKAP
REKA BENTUK BANGUNAN
REKA BENTUK MARIN
REKA BENTUK AERONAUTIK
REKA BENTUK LEBUHRAYA
REKA BENTUK EMPANGAN DAN
SEBAGAINYA.
7. KONSEP DAN TUJUAN
Rekabentuk adalah satu proses
berterusan yang merangkumi aktiviti
kreatif dan penggunaan teknologi untuk
menyelesaikan masalah tertentu.
Contohnya;
Reka bentuk sebuah set komputer adalah
berbeza mengikut zaman dan kehendak
peredaran perkembangan teknologi.
8. ELEMEN-ELEMEN REKA BENTUK.
Terdiridaripada;
Proses reka bentuk
Penggunaan teknologi
Binaan
Ekonomi
Pemilihan bahan
Kesesuaian
9. Proses reka bentuk.
Terdiri daripada;
Menganalisis masalah
menyiasat
idea awalan
analisis idea
penghalusan
keputusan
perlaksanaan
10. Menganalisis masalah.
Masalah perlu dikenalpasti terlebih dahulu
sebarang usaha dapat dilakukan untuk
menyelesaikannya.
11. Latar belakang Ekonomi
masalah
MENGANALISIS MASALAH
Keperluan
Data
Kesan
Sebab
12. Menyiasat
Pengumpualn maklumat yang dilakukan untuk
mendapatkan idea awalan/penyelesaian masalah. Di
antara maklumat yang diperlukan ialah:-
Maklumat dari segi kos.
Harga produk di pasaran
Reka bentuk produk terkini di pasaran.
Keperluan pengguna.
Harga bahan mentah yang didapati di pasaran.
Maklum balas dari pengguna.
13. Idea awalan
Setelah masalah dianalisis dengan jelas
berdasarkan maklumat yang didapati,langkah
seterusnya adalah mengumpulkan idea yang
mungkin dapat menyelesaikan masalah. Idea
awalan boleh dikumpulkan secara individu
atau berkumpulan dan mesti secara
menyeluruh. Idea awalan boleh diilham secara
bertulis atau lakaran idea.
15. Analisis Idea
Proses ini dijalankan setelah idea awalan
dicetuskan. Hanya sebilangan idea awalan di
analisis dan memilih yang terbaik (maksimum
3 pilihan) untuk dikaji secara terperinci.Ini
adalah untuk menentukan kos, kekuatan,
fungsi serta daya penarikan. Analisis idea
boleh dibahagikan kepada tujuh jenis.
16. kekuatan
Fungsi
kos
Ergonomik ANALISIS IDEA
Kuantiti fizikal
Model dan Pasaran dan
prototaip produk
17. Penghalusan
Setelah idea awalan dianalisis dan memilih
sebahagian idea yang dicetuskan, penghalusan
perlu dibuat sebelum membuat keputusan
memilih idea yang terbaik.Oleh yang
demikian, lakaran-lakaran kasar ditukarkan
kepada lukisan berskala bagi membolehkan
analisis tertentu dijalankan seperti analisis
ruang,pengukuran dimensi kritikal serta
pengiraan tertentu dan pemasangan yang
kritikal.
18. Berat dan
Sudut dan
isipadu
Panjang
Keratan dan
Lukisan persilangan
berskala PENGHALUSAN
Bentuk dan
Sifat-sifat
tekstur
fizikal
19. Keputusan
Pada peringkat ini, satu reka bentuk yang
paling baik perlu dipilih sebagai penyelesaian
kepada masalah reka bentuk . Proses membuat
keputusan atau pemilihan rekabentuk
bergantung kepada fakta dan data tertentu
yang terhasil semasa fasa analisis dan
penghalusan.
20. Tolak
Terima
Gabungkan Kaji Semula
KEPUTUSAN
Sambung Berhenti
21. Perlaksanaan
Merupakan fasa terakhir dalam satu kitaran
proses reka bentuk. Fasa ini, reka bentuk
sesuatu produk akan bertukar menjadi reality.
Bagi tujuan ini, lukisan kerja serta spesifikasi
yang lengkap disediakan serta digunakan
dalam kaedah pembuatan untuk menghasilkan
sesuatu produk.Pada masa kini lukisan kerja
dihasilkan menggunakan perisian komputer
CAD. Produk yang dihasilkan boleh dibuat
produk sebenar ataupun model.
22. Penyelesaian
yang lengkap
Spesifikasi
PERLAKSANAAN
Perincian
Produk/model
Lukisan Kerja
23. Dalam menghasilkan sesuatu reka bentuk beberapa
perkara perlu diambilkira oleh pereka bentuk. Antara
perkara-perkara yang perlu diambilkira ialah:
Penggunaan teknologi
Binaan reka bentuk
Ekonomi reka bentuk
Pemilihan bahan
Kesesuaian reka bentuk.
24. PENGGUNAAN TEKNOLOGI.
Seorang pereka bentuk perlu menggunakan
aspek-aspek teknologi tertentu dalam
menyelesaikan masalah reka bentuk. Teknologi
yang digunakan mestilah bersesuaian dengan
penggunaan sesuatu reka bentuk. Sebahagian
kecil daripadanya adalah seperti berikut:
25. 1. Gear
2. Takal dan talisawat
3. Penyambung atau perangkai
4. Roda
5. Galas
6. Pacuan rantai
7. Komponen piawai
26. BINAAN REKA BENTUK
• Binaan reka bentuk adalah merujuk
kepada penyambungan struktur atau
bahagian produk dengan menggunakan
kaedah tertentu supaya produk dapat
berfungsi dengan cekap serta selamat
pada kos minimum.
27. Binaan reka bentuk merangkumi
beberapa aspek penting iaitu:
Kekuatan struktur
Saiz produk
Faktor pemasangan dan penyenggaraan
Faktor keselamatan
Proses binaan
28. Kekuatan struktur
• Bergantung kepada beberapa factor:
– bahan struktur yang digunakan
– bentuk anggota struktur
– bentuk keseluruhan struktur
– sambungan antara anggota struktur
29. Saiz produk
• Dua jenis saiz perlu dipertimbangkan
ketika membuat reka bentuk iaitu;
– saiz anggota struktur
– saiz keseluruhan struktur
30. Faktor pemasangan dan
penyenggaraan
• Faktor pemasangan dan penyenggaraan
memainkan peranan penting dalam menentukan
pembinaan sesuatu produk.
• Kaedah pemasangan adalah mudah dilakukan
dan jelas.
• Penyenggaraan pada sesuatu produk mestilah
mudah,penggunaan alat yang minimum,tanpa
kepakaran yang tinggi dan terdapat penjelasan
jelas bagaimana disenggarakan.
31. Faktor keselamatan.
• Ciri-ciri keselamatan perlu difikirkan serta
digabungkan ketika sesuatu produk itu di reka
bentuk.
• Diantara ciri-ciri keselamatan yang perlu ada
pada reka bentuk produk adalah:
– kemasan serta bucu tajam mesti dielakkan.
– Produk yang direka bentuk mestilah stabil
penggunaannya.
– Produk atau mesin yang mempunyai bahagian yang
bergerak atau berputar perlu mempunyai pengadang.
– Dalam sisitem elektrik , ciri-ciri keselamatan yang
khusus perlu diadakan.
32. Proses binaan
Sesuatu produk itu dibina daripada
anggota-anggota yang berasingan dengan
menggunakan kaedah pembinaan yang
tertentu.
• Kaedah pembinaan bagi menghasilkan
satu produk lengkap boleh dibahagikan
kepada dua kumpulan iaitu:
• membentuk atau memisah
• menyambung
33. EKONOMI REKA BENTUK
Dalam menentukan ekonomi dalam reka
bentuk dua perkara perlu
dipertimbangkan:
• Bahan
• Proses-proses binaan.
36. 1. Nilai estetik
Adalah satu nilai yang berkaitan dengan ciri-ciri
atau konsep kecantikan, keindahan dan
kesenian.Konsep-konsep yang biasa dikaitkan
dengan nilai estetik dalam bidang reka bentuk
produk adalah seperti berikut:
• fungsi
• bentuk
• keharmonian (unity)
• stail
37. 2. Nilai ergonomik
• Adalah nilai mengenai perhubungan
manusia (pengguna) dan persekitaran
(produk reka bentuk). Dari segi ergonomik
pereka bentuk perlu menghasilkan produk
atau reka bentuk yang dapat diguna pakai
dengan mudah, berkesan, senang
dipelajari (friendly) dan tidak memerlukan
kekuatan fizikal dan mental yang
keterlaluan.
38. PEMBENTANGAN HASIL REKA BENTUK
Pembentangan hasil reka bentuk adalah
proses menyampaikan maklumat reka
bentuk yang dicadangkan kepada satu
kumpulan sasaran supaya ia boleh
difahami serta dipertimbangkan untuk
dilaksanakan. Biasanya pembentangan
terbahagi kepada tiga perkara utama.
39. Laporan bertulis
Pengenalan
Penerangan mengenai penyelesaian
Kos reka bentuk
Lakaran & lukisan kerja
Model dan prototaip
Persembahan/lisan