Automatic room light intensity detection and control using a microprocessor and light sensors
•Download as DOC, PDF•
0 likes•101 views
The document proposes a design called the HLCM (Home Light Control Module) that uses a microprocessor and light sensors for automatic room light detection and control. The HLCM, which will be installed in every light fixture of a home, uses a PIR sensor to detect human presence and a light sensor to measure light intensity. If no one is present, all lights will turn off, but if someone enters, the HLCM will maintain sufficient light by controlling the number of lights. The HLCM also includes an RF module to transmit data between units to control lights in different areas of the home remotely, with the goal of reducing total power consumption.
Report
Share
Report
Share
Recommended
IR Controller For Air Conditioning Unit
This Presentation Describes a simple project consists of an IR Remote for the Air Conditioning Unit.
IoT Based Fire Alarm and Monitoring System
This paper has proposed an internet of things (IoT) based fire alarm and monitoring system best suited for industrial and
home applications.
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM
The idea behind this project is to use the existing GSM infrastructure. So, all the operations involve the GSM system also. As we send any SMS, it goes through the GSM system. Any sent SMS can be received if we use a SIM card and GSM module. To operate any GSM modem, we have to use the AT commands to operate them. For example, if any SMS arrives the GSM modem sends the serial data in ASCII format. We can read these data if we connect the modem with the serial port of the microcontroller at the baud rate of 9600. As the microcontroller comes to know that a SMS has been arrived, it can sent a proper AT command to read the SMS. The reading of SMS returns the mobile number of sender, the time and much more information. We have to select the SMS part of the message. The starting string of the SMS is used as the password. As the password is matched, then the SMS arrival is assumed to be valid by the microcontroller otherwise, it ignores the SMS. Working of “FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM” is very simple.
wireless security control system and sensor network for smoke and fire detection
This technical paper presents a wireless security control system and sensor network for smoke and fire detection. The system uses a microcontroller, smoke sensor, fire sensor, LCD, buzzer, and GSM to detect smoke and fire, display information, sound an alarm, and alert authorized individuals via text message. It aims to protect homes and public areas from fire accidents in a low-cost and automated way. The system has applications in buses, trains, forests, industries, and residential/commercial areas and offers advantages like reduced manpower needs, low cost, time savings, and increased safety.
Intelligent monitoring and control rendered to street lighting
Intelligent Monitoring and Control Rendered to Street Lighting is a novel system to wirelessly control individual streetlights using a microcontroller and RF IC in each light. The system allows the control center to send messages through a gateway node to automatically or manually switch lights on/off, dim intensity, and monitor status. This reduces power consumption by 50% through dimming and lowers maintenance costs. The design aims to be flexible, compact and cost effective for any application.
Intelligent monitoring and control rendered to street lighting
Intelligent Monitoring and Control Rendered to Street Lighting is a novel system to wirelessly control individual streetlights using a microcontroller and RF IC in each light. The system allows the control center to send messages through a gateway node to automatically or manually switch lights on/off, dim intensity, and monitor status. This reduces power consumption by 50% through dimming and lowers maintenance costs. The design aims to be flexible, compact and cost effective for street lighting control applications.
Iot based fire department alerting system
Leading project maker in Nashik, Electrical project in nashik goelectromeh.in, Electronic project in nashik goelectromeh.in, computer project in nashik, Electrical project engineering project in nashik goelectromeh.in, Electronic project engineering project in nashik goelectromeh.in, Computer project engineering project in nashik goelectromeh.in,
Electrical project Diploma project in nashik goelectromeh.in, Electronic project Diploma project in nashik goelectromeh.in, Computer project Diploma project in nashik goelectromeh.in.
Ffr seminar presentation
This document describes a technical seminar presentation on an automatic fire sensing and extinguishing robot. The robot is equipped with flame sensors to detect fires, a microcontroller to process sensor data and control the robot's movement, motors to move and position a water pump, and a GSM modem to alert authorities of any detected fires via SMS messages. The presentation covers the objectives, literature review, block diagram, working mechanism, component descriptions, advantages and disadvantages, and references cited. The robot is intended to increase firefighter safety by automatically detecting and extinguishing fires without human intervention.
Recommended
IR Controller For Air Conditioning Unit
This Presentation Describes a simple project consists of an IR Remote for the Air Conditioning Unit.
IoT Based Fire Alarm and Monitoring System
This paper has proposed an internet of things (IoT) based fire alarm and monitoring system best suited for industrial and
home applications.
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM
The idea behind this project is to use the existing GSM infrastructure. So, all the operations involve the GSM system also. As we send any SMS, it goes through the GSM system. Any sent SMS can be received if we use a SIM card and GSM module. To operate any GSM modem, we have to use the AT commands to operate them. For example, if any SMS arrives the GSM modem sends the serial data in ASCII format. We can read these data if we connect the modem with the serial port of the microcontroller at the baud rate of 9600. As the microcontroller comes to know that a SMS has been arrived, it can sent a proper AT command to read the SMS. The reading of SMS returns the mobile number of sender, the time and much more information. We have to select the SMS part of the message. The starting string of the SMS is used as the password. As the password is matched, then the SMS arrival is assumed to be valid by the microcontroller otherwise, it ignores the SMS. Working of “FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM” is very simple.
wireless security control system and sensor network for smoke and fire detection
This technical paper presents a wireless security control system and sensor network for smoke and fire detection. The system uses a microcontroller, smoke sensor, fire sensor, LCD, buzzer, and GSM to detect smoke and fire, display information, sound an alarm, and alert authorized individuals via text message. It aims to protect homes and public areas from fire accidents in a low-cost and automated way. The system has applications in buses, trains, forests, industries, and residential/commercial areas and offers advantages like reduced manpower needs, low cost, time savings, and increased safety.
Intelligent monitoring and control rendered to street lighting
Intelligent Monitoring and Control Rendered to Street Lighting is a novel system to wirelessly control individual streetlights using a microcontroller and RF IC in each light. The system allows the control center to send messages through a gateway node to automatically or manually switch lights on/off, dim intensity, and monitor status. This reduces power consumption by 50% through dimming and lowers maintenance costs. The design aims to be flexible, compact and cost effective for any application.
Intelligent monitoring and control rendered to street lighting
Intelligent Monitoring and Control Rendered to Street Lighting is a novel system to wirelessly control individual streetlights using a microcontroller and RF IC in each light. The system allows the control center to send messages through a gateway node to automatically or manually switch lights on/off, dim intensity, and monitor status. This reduces power consumption by 50% through dimming and lowers maintenance costs. The design aims to be flexible, compact and cost effective for street lighting control applications.
Iot based fire department alerting system
Leading project maker in Nashik, Electrical project in nashik goelectromeh.in, Electronic project in nashik goelectromeh.in, computer project in nashik, Electrical project engineering project in nashik goelectromeh.in, Electronic project engineering project in nashik goelectromeh.in, Computer project engineering project in nashik goelectromeh.in,
Electrical project Diploma project in nashik goelectromeh.in, Electronic project Diploma project in nashik goelectromeh.in, Computer project Diploma project in nashik goelectromeh.in.
Ffr seminar presentation
This document describes a technical seminar presentation on an automatic fire sensing and extinguishing robot. The robot is equipped with flame sensors to detect fires, a microcontroller to process sensor data and control the robot's movement, motors to move and position a water pump, and a GSM modem to alert authorities of any detected fires via SMS messages. The presentation covers the objectives, literature review, block diagram, working mechanism, component descriptions, advantages and disadvantages, and references cited. The robot is intended to increase firefighter safety by automatically detecting and extinguishing fires without human intervention.
Temparature alarm
This is a file for microprocessor project. Here i have given brief pics and description about Temperature alarm.
AN INTEGRATED SOLUTION FOR BOTH MONITORING AND CONTROLLING FOR AUTOMIZATION...
Temperature monitoring plays a major role in controlling it according to its varied conditions. This
process is common in all critical areas like data centre, server rooms, grid rooms and other data
communication equipped rooms. This is mandatory for each organization/industry to impart such
process, as most of the critical data would be in data centre along with their network infrastructure which
having various electronic, electrical and mechanical devices are involved for data transmissions. These
devices are very much depend on the environmental factors such as temperature, moisture, humidity etc.,
and also emit heat in the form of thermal energy when they are in functional. To overcome these heats,
the server/data centre room(s) would be engaged with multiple (distributed) air-conditioning (ac) systems
to provide cooling environment and maintain the temperature level of the room. The proposed paper is
the study of automization of monitoring and controlling temperature as per desired requirements with
wsn network
Smart Fire Detection using Pi and AWS
This document outlines a proposed smart fire alarm system using a Raspberry Pi and Amazon Web Services. The system would use machine learning and computer vision on images from the Raspberry Pi to detect fires and reduce false alarms. If a fire is detected, the Raspberry Pi would communicate with AWS services like SNS, SQS and Lambda using the MQTT protocol to alert users through a smart home hub. The proposed architecture diagrams this system and the document concludes that this IoT approach could successfully integrate AWS cloud services and deep learning for real-time fire detection with reduced false positives.
Gas and smoke detection system using arduino
To study the working principle of gas and smoke detector system
To design and construct of the gas and smoke detector system and control system using Arduino with Bluetooth module
To implement gas and smoke design in the project
At the very first time of smoke creation so that avoided the unwanted accident
Smart Street Lamp Monitoring System Using Wireless Xbee
Smart street light system: These street lights can automatically switch ON/OFF depending upon the daylight conditions.
Each lamp checks its status and if found faulty, sends status to area control system. A central monitoring system collects
data of each area and generates report. Each lamp talks to each other as in mesh topology, so that each lamp can act as a
bridge between the nth lamp and the area control, thus covering a wider area.At central monitoring system,
a Graphic User Interface is used to check the status, lamp details, lineman details, time of fault and report can be
generated depending upon area or undertaking lineman.
Need for Wireless Fire Detection Systems using IOT
1) The document discusses the need for wireless fire detection systems using the Internet of Things (IoT). It describes how IoT allows physical devices with sensors to collect data and transmit it over the internet.
2) The document outlines several techniques for detecting fires wirelessly using sensors and technologies like image processing, CCTV, and Zigbee wireless networks. It also discusses components commonly used in IoT fire detection systems like microcontrollers, temperature sensors, gas sensors, and flame sensors.
3) The key advantages of wireless fire detection systems using IoT are real-time monitoring, early detection of fires, and automatic alarm activation. This can help provide early extinguishing of fires and reduce damage.
Wireless gas leakage detector with device control
This document describes a wireless home safety gas leakage detector and device control system. The system has two main modules: a detection and transmission module and a receiver module. The detection module uses a gas sensor to detect changes in LPG or CO gas concentration and transmits a signal to the receiver module. The receiver module then activates a relay system to control devices like exhaust fans. The system was designed and its hardware was demonstrated to efficiently detect gas leaks and function as a fire alarm. Potential applications include protection from gas leaks in homes, vehicles and industries.
Light level and gas monitoring system
This document introduces a light level and gas monitoring system that consists of sensors to measure light, methane, butane, propane, LPG and smoke levels in a room. The system alerts users via SMS and buzzer if light levels are low or gas is detected. It uses a photo-resistor to measure light, an MQ-2 gas sensor, an LCD display, and a SIM800l GSM module connected to an Arduino Uno microcontroller. The system is less bulky than former systems and can provide real-time data on measured quantities via the microcontroller. It has advantages over analog and some digital systems in providing unambiguous data and a more functional design.
Arduino UNO Gas & Smoke Detection - Embedded Systems
Introduction
Components Used
About MQ-4 Gas & Smoke Sensor
Circuit Schematics
Code
Image of Current System
Limitations
References
Iot based fire alarm system
The document describes a project report for an IoT based fire alarm system using ESP8266 Wi-Fi modules and MQTT. The system uses temperature and flame sensors to detect fire outbreaks and sends alerts to a control station over Wi-Fi to trigger actuators like buzzers for response. The sensors monitor physical quantities which are processed by an ESP8266 microcontroller and sent via MQTT to notify authorities and allow remote monitoring and control of the system.
home automaton using pc ppt
This document describes a home automation project that allows controlling home appliances like a TV, refrigerator, and lights using a personal computer. A PC is interfaced with a microcontroller via an RS232 cable. The microcontroller is connected to relays that switch appliances on and off. Home automation provides network connectivity between computers, appliances, and subsystems like HVAC and security. The project allows remote control and monitoring of appliances for convenience and energy savings.
fire detection system
this system will automatically detects the fire and prevent that by using water sprinkler to spray water on it.
Presentation group 1
This document describes an automatic room light, temperature, and fire detection alarm system with a visitor counter. The system uses sensors like LDR, temperature sensor, IR sensors, and smoke sensor along with an Arduino microcontroller to automatically control the room lights and fan based on ambient light and temperature. It also counts the number of visitors and detects fires by triggering an alarm. The system aims to reduce electricity waste and provide safety by automating control of lights, fans, temperature and fire detection based on sensor readings.
Auto turning outdoor light
The document describes an automated outdoor light circuit that uses an LDR light sensor and NPN transistor to turn a light on and off based on light intensity levels. The circuit aims to reduce human effort in controlling lights and lower power consumption. It works by using an LDR light sensor to detect light levels and trigger an NPN transistor switch to power a light. The automated light system has applications for street lights, home exterior lights, and outdoor gardens. It provides effortless and economical light control but has limitations in response time and issues measuring light levels.
Transparency and anti corruption
Certificate of Completion Transparency and Anti-Corruption by MOOC Chile José Zalaquett, Udemy 2015.
Automatic break failure and engine heat controller
This document describes an automatic brake failure and engine heat controller system that uses a microcontroller to control vehicle safety features. The system can automatically shut off the ignition if the brakes fail and activate a water pump and cooling fan if the engine temperature exceeds a limit. An LCD display is included to show temperature levels and other parameters to the user, with all components monitored and controlled by a PIC16f877a microcontroller.
Web 2.0
El documento habla sobre el fenómeno de Web 2.0 y las redes sociales surgidas de aplicaciones en internet como YouTube y blogs, los cuales permiten compartir y actualizar información de forma constante. También menciona cómo Google provee resultados relevantes a las búsquedas y cómo las redes sociales son herramientas comunicativas e innovadoras para compartir conocimiento. Finalmente, señala que la Data Web representa la evolución de la red hacia la inteligencia artificial y la visión 3D a través de programas inteligentes que usan datos semánticos.
Visita médico: homeopatia médica
Un médico homeopático recoge de forma detallada los síntomas físicos, emocionales y circunstancias vitales del paciente para elaborar la historia clínica, así como realiza una exploración clínica convencional y pruebas complementarias para encontrar síntomas relevantes que rodean la enfermedad del paciente.
Training%20brochure
The document provides information about the European Civil Protection Training Programme, which aims to prepare experts for international civil protection assistance interventions. It describes 12 training courses that cover topics such as the EU Civil Protection Mechanism, operational management, security, information management, and international coordination. The courses include theory, practical exercises, and networking opportunities. Candidates are encouraged to follow a basic order of courses and may need a certificate from a distance preparation tool to gain admission to some courses.
#ShareThis2015 Class 3: Professional and Organizational Approaches to Social...
This slide deck covers the second class of my social media course, Share This: Professional and Organizational Approaches to Social Media. If you would like to know more about the course or what services I can provide with regard to social media, please feel free to reach out to me.
Good tidings,
Lance
Lance Eaton
he/him/his
http://www.ByAnyOtherNerd.com
https://twitter.com/leaton01
https://www.linkedin.com/in/leaton01/
____________________
I wish I had all the answers; better yet, I wish I knew all the questions to ask.
Automatic temperature based exhaust fan controller
This document describes an automatic temperature-based exhaust fan controller circuit. The circuit uses a thermistor to sense room temperature, which is converted to a digital signal by an analog-to-digital converter (ADC). The microcontroller then adjusts the firing angle of a TRIAC, which controls the average power and therefore speed of the exhaust fan motor, based on the temperature reading. The fan speed will increase as the temperature rises to effectively regulate the room temperature.
Ecornell plant based nutrition certificate
Sachin Pagey wrote a document on June 11, 2015 about plant based nutrition. The document likely discusses the health benefits of a plant-based diet and may provide recommendations for including more plants and removing animal products from one's nutrition plan. In just 3 sentences, the summary captures the key details of who wrote the document, when it was written, and hints at the overall topic and purpose based on the limited information provided.
More Related Content
What's hot
Temparature alarm
This is a file for microprocessor project. Here i have given brief pics and description about Temperature alarm.
AN INTEGRATED SOLUTION FOR BOTH MONITORING AND CONTROLLING FOR AUTOMIZATION...
Temperature monitoring plays a major role in controlling it according to its varied conditions. This
process is common in all critical areas like data centre, server rooms, grid rooms and other data
communication equipped rooms. This is mandatory for each organization/industry to impart such
process, as most of the critical data would be in data centre along with their network infrastructure which
having various electronic, electrical and mechanical devices are involved for data transmissions. These
devices are very much depend on the environmental factors such as temperature, moisture, humidity etc.,
and also emit heat in the form of thermal energy when they are in functional. To overcome these heats,
the server/data centre room(s) would be engaged with multiple (distributed) air-conditioning (ac) systems
to provide cooling environment and maintain the temperature level of the room. The proposed paper is
the study of automization of monitoring and controlling temperature as per desired requirements with
wsn network
Smart Fire Detection using Pi and AWS
This document outlines a proposed smart fire alarm system using a Raspberry Pi and Amazon Web Services. The system would use machine learning and computer vision on images from the Raspberry Pi to detect fires and reduce false alarms. If a fire is detected, the Raspberry Pi would communicate with AWS services like SNS, SQS and Lambda using the MQTT protocol to alert users through a smart home hub. The proposed architecture diagrams this system and the document concludes that this IoT approach could successfully integrate AWS cloud services and deep learning for real-time fire detection with reduced false positives.
Gas and smoke detection system using arduino
To study the working principle of gas and smoke detector system
To design and construct of the gas and smoke detector system and control system using Arduino with Bluetooth module
To implement gas and smoke design in the project
At the very first time of smoke creation so that avoided the unwanted accident
Smart Street Lamp Monitoring System Using Wireless Xbee
Smart street light system: These street lights can automatically switch ON/OFF depending upon the daylight conditions.
Each lamp checks its status and if found faulty, sends status to area control system. A central monitoring system collects
data of each area and generates report. Each lamp talks to each other as in mesh topology, so that each lamp can act as a
bridge between the nth lamp and the area control, thus covering a wider area.At central monitoring system,
a Graphic User Interface is used to check the status, lamp details, lineman details, time of fault and report can be
generated depending upon area or undertaking lineman.
Need for Wireless Fire Detection Systems using IOT
1) The document discusses the need for wireless fire detection systems using the Internet of Things (IoT). It describes how IoT allows physical devices with sensors to collect data and transmit it over the internet.
2) The document outlines several techniques for detecting fires wirelessly using sensors and technologies like image processing, CCTV, and Zigbee wireless networks. It also discusses components commonly used in IoT fire detection systems like microcontrollers, temperature sensors, gas sensors, and flame sensors.
3) The key advantages of wireless fire detection systems using IoT are real-time monitoring, early detection of fires, and automatic alarm activation. This can help provide early extinguishing of fires and reduce damage.
Wireless gas leakage detector with device control
This document describes a wireless home safety gas leakage detector and device control system. The system has two main modules: a detection and transmission module and a receiver module. The detection module uses a gas sensor to detect changes in LPG or CO gas concentration and transmits a signal to the receiver module. The receiver module then activates a relay system to control devices like exhaust fans. The system was designed and its hardware was demonstrated to efficiently detect gas leaks and function as a fire alarm. Potential applications include protection from gas leaks in homes, vehicles and industries.
Light level and gas monitoring system
This document introduces a light level and gas monitoring system that consists of sensors to measure light, methane, butane, propane, LPG and smoke levels in a room. The system alerts users via SMS and buzzer if light levels are low or gas is detected. It uses a photo-resistor to measure light, an MQ-2 gas sensor, an LCD display, and a SIM800l GSM module connected to an Arduino Uno microcontroller. The system is less bulky than former systems and can provide real-time data on measured quantities via the microcontroller. It has advantages over analog and some digital systems in providing unambiguous data and a more functional design.
Arduino UNO Gas & Smoke Detection - Embedded Systems
Introduction
Components Used
About MQ-4 Gas & Smoke Sensor
Circuit Schematics
Code
Image of Current System
Limitations
References
Iot based fire alarm system
The document describes a project report for an IoT based fire alarm system using ESP8266 Wi-Fi modules and MQTT. The system uses temperature and flame sensors to detect fire outbreaks and sends alerts to a control station over Wi-Fi to trigger actuators like buzzers for response. The sensors monitor physical quantities which are processed by an ESP8266 microcontroller and sent via MQTT to notify authorities and allow remote monitoring and control of the system.
home automaton using pc ppt
This document describes a home automation project that allows controlling home appliances like a TV, refrigerator, and lights using a personal computer. A PC is interfaced with a microcontroller via an RS232 cable. The microcontroller is connected to relays that switch appliances on and off. Home automation provides network connectivity between computers, appliances, and subsystems like HVAC and security. The project allows remote control and monitoring of appliances for convenience and energy savings.
fire detection system
this system will automatically detects the fire and prevent that by using water sprinkler to spray water on it.
Presentation group 1
This document describes an automatic room light, temperature, and fire detection alarm system with a visitor counter. The system uses sensors like LDR, temperature sensor, IR sensors, and smoke sensor along with an Arduino microcontroller to automatically control the room lights and fan based on ambient light and temperature. It also counts the number of visitors and detects fires by triggering an alarm. The system aims to reduce electricity waste and provide safety by automating control of lights, fans, temperature and fire detection based on sensor readings.
Auto turning outdoor light
The document describes an automated outdoor light circuit that uses an LDR light sensor and NPN transistor to turn a light on and off based on light intensity levels. The circuit aims to reduce human effort in controlling lights and lower power consumption. It works by using an LDR light sensor to detect light levels and trigger an NPN transistor switch to power a light. The automated light system has applications for street lights, home exterior lights, and outdoor gardens. It provides effortless and economical light control but has limitations in response time and issues measuring light levels.
What's hot (14)
AN INTEGRATED SOLUTION FOR BOTH MONITORING AND CONTROLLING FOR AUTOMIZATION...
AN INTEGRATED SOLUTION FOR BOTH MONITORING AND CONTROLLING FOR AUTOMIZATION...
Smart Street Lamp Monitoring System Using Wireless Xbee
Smart Street Lamp Monitoring System Using Wireless Xbee
Need for Wireless Fire Detection Systems using IOT
Need for Wireless Fire Detection Systems using IOT
Arduino UNO Gas & Smoke Detection - Embedded Systems
Arduino UNO Gas & Smoke Detection - Embedded Systems
Viewers also liked
Transparency and anti corruption
Certificate of Completion Transparency and Anti-Corruption by MOOC Chile José Zalaquett, Udemy 2015.
Automatic break failure and engine heat controller
This document describes an automatic brake failure and engine heat controller system that uses a microcontroller to control vehicle safety features. The system can automatically shut off the ignition if the brakes fail and activate a water pump and cooling fan if the engine temperature exceeds a limit. An LCD display is included to show temperature levels and other parameters to the user, with all components monitored and controlled by a PIC16f877a microcontroller.
Web 2.0
El documento habla sobre el fenómeno de Web 2.0 y las redes sociales surgidas de aplicaciones en internet como YouTube y blogs, los cuales permiten compartir y actualizar información de forma constante. También menciona cómo Google provee resultados relevantes a las búsquedas y cómo las redes sociales son herramientas comunicativas e innovadoras para compartir conocimiento. Finalmente, señala que la Data Web representa la evolución de la red hacia la inteligencia artificial y la visión 3D a través de programas inteligentes que usan datos semánticos.
Visita médico: homeopatia médica
Un médico homeopático recoge de forma detallada los síntomas físicos, emocionales y circunstancias vitales del paciente para elaborar la historia clínica, así como realiza una exploración clínica convencional y pruebas complementarias para encontrar síntomas relevantes que rodean la enfermedad del paciente.
Training%20brochure
The document provides information about the European Civil Protection Training Programme, which aims to prepare experts for international civil protection assistance interventions. It describes 12 training courses that cover topics such as the EU Civil Protection Mechanism, operational management, security, information management, and international coordination. The courses include theory, practical exercises, and networking opportunities. Candidates are encouraged to follow a basic order of courses and may need a certificate from a distance preparation tool to gain admission to some courses.
#ShareThis2015 Class 3: Professional and Organizational Approaches to Social...
This slide deck covers the second class of my social media course, Share This: Professional and Organizational Approaches to Social Media. If you would like to know more about the course or what services I can provide with regard to social media, please feel free to reach out to me.
Good tidings,
Lance
Lance Eaton
he/him/his
http://www.ByAnyOtherNerd.com
https://twitter.com/leaton01
https://www.linkedin.com/in/leaton01/
____________________
I wish I had all the answers; better yet, I wish I knew all the questions to ask.
Automatic temperature based exhaust fan controller
This document describes an automatic temperature-based exhaust fan controller circuit. The circuit uses a thermistor to sense room temperature, which is converted to a digital signal by an analog-to-digital converter (ADC). The microcontroller then adjusts the firing angle of a TRIAC, which controls the average power and therefore speed of the exhaust fan motor, based on the temperature reading. The fan speed will increase as the temperature rises to effectively regulate the room temperature.
Ecornell plant based nutrition certificate
Sachin Pagey wrote a document on June 11, 2015 about plant based nutrition. The document likely discusses the health benefits of a plant-based diet and may provide recommendations for including more plants and removing animal products from one's nutrition plan. In just 3 sentences, the summary captures the key details of who wrote the document, when it was written, and hints at the overall topic and purpose based on the limited information provided.
Evidencias científicas-homeopatia-médica
EVIDENCIAS CIENTÍFICAS DE LA HOMEOPATÍA MÉDICA:
HOMEOPATIA MEDICA, MEDICOS HOMEOPATICOS, HOMEOPATIA SI FUNCIONA, AMHB, MEDICOS HOMEOPATICOS BARCELONA, HOMEOPATIA NO ES UNA ESTAFA, HOMEOPATIA FUNCIONA, BENEFICIOS HOMEOPATIA, CELEBRIDADES QUE USAN HOMEOPATIA
LibQUAL+ Survey Introduction
This document provides an introduction and overview of the LibQUAL+ survey. It discusses the development and history of LibQUAL+ from 2000 to present, including its iterative development process involving mixed qualitative and quantitative methods. It outlines the core dimensions (Affect of Service, Library as Place, Information Control) and items measured by the survey. It also discusses frameworks for interpreting LibQUAL+ results, including examining perceptions vs expectations, longitudinal comparisons, and peer comparisons. The document promotes LibQUAL+ as a standardized assessment tool that allows libraries to understand user perspectives on service quality.
Pretrito indefinido irregular
El documento proporciona una lista de verbos regulares e irregulares en pretérito indefinido o pretérito perfecto simple en español. Incluye las conjugaciones completas de los verbos ser, ir, dar, estar, tener, andar, hacer, querer, venir y otros verbos irregulares como poder, poner, haber, saber, caber, así como variaciones irregulares comunes en la tercera persona. También ofrece ejemplos de verbos que siguen patrones irregulares como cambiar la e a i, la o a uo/u o
Laporan teknis manajemen proyek robot untuk membersihkan sampah kolam bere...
Laporan Manajemen Proyek Fido Girgazita
Case tool lab-Reg2013 by Karthick Raja
This document is a record notebook for a computer science student documenting the experiments completed in a CASE tools laboratory course. It contains details of 15 software systems developed during the course like passport automation, book banking, stock maintenance, etc. It also includes studies of UML diagrams like use case diagrams, sequence diagrams, class diagrams, etc. and how to connect a Visual Basic form to a Microsoft Access database.
Odoo OpenERP 7 University Management System
The document describes a university management system software that provides functionality for student management, attendance, exams, events, fees, hostel management, library management, transport management, activity management, and more. It allows tracking of student information and activities. Key features include admission management, timetables, exam scheduling, attendance tracking, library book management, hostel room allocation, fees collection, and student transportation assignment. The software gives administrators, faculty, and students access to relevant modules and dashboards.
Famosos homeopatía médica
HOMEOPATIA MEDICA, MEDICOS HOMEOPATICOS, HOMEOPATIA SI FUNCIONA, AMHB, MEDICOS HOMEOPATICOS BARCELONA, HOMEOPATIA NO ES UNA ESTAFA, HOMEOPATIA FUNCIONA, BENEFICIOS HOMEOPATIA, CELEBRIDADES QUE USAN HOMEOPATIA
online examination management system
The document is a project report submitted by Praveen Patel for the development of an online examination system. It discusses the technologies used such as Java, servlets, and Oracle database. It provides requirements for the system including functional and non-functional requirements. It also discusses the design of the system using use case and class diagrams. The development was done using the waterfall model. Various features of the system are described along with testing and validation. Finally, it provides an estimation of the project cost using function point analysis.
Viewers also liked (16)
Automatic break failure and engine heat controller
Automatic break failure and engine heat controller
#ShareThis2015 Class 3: Professional and Organizational Approaches to Social...
#ShareThis2015 Class 3: Professional and Organizational Approaches to Social...
Automatic temperature based exhaust fan controller
Automatic temperature based exhaust fan controller
Laporan teknis manajemen proyek robot untuk membersihkan sampah kolam bere...
Laporan teknis manajemen proyek robot untuk membersihkan sampah kolam bere...
Similar to Automatic room light intensity detection and control using a microprocessor and light sensors
Automatic Room Light Intensity Detection And Control Using A Microprocessor A...
The document describes a design for an automatic room light detection and control system called the HLCM (Home Light Control Module). Key points:
- The HLCM uses PIR sensors to detect human presence, light sensors to measure light intensity, a microprocessor to control lights via solid state relays, and an RF module to enable communication between HLCM units.
- The HLCM can turn lights on or off to maintain sufficient light levels based on measurements from the light sensors. It can also activate lights in adjacent areas via RF communication to pre-emptively provide lighting where a person is moving to.
- Experimental results showed the HLCM can accurately measure and control light levels, with communication between units. It provides automatic
DESIGN OF AN INTELLIGENT AND EFFICIENT LIGHT CONTROL SYSTEM
Recently, many researches has been carried out to save the energy in many aspects such
as producing a device which consumes very less energy or designing a system which helps to
reduce the power consumption using the existing devices. In this paper, a room light control system
is proposed which is named as light control system (LCS). This proposed system will able to
provide the needed light which provides the satisfaction of users and will provide energy saving
and management.
In this paper the Lighting Control System and the decision making algorithm, are
discussed. As per the algorithm the system will first check any occupant is there in the room. If so
then the system will check the intensity of light in the room and if it is low then it will switch on the
light.
Our proposed system can able to minimize the energy consumed for lighting in a room
and can able to provide it efficiently.
AUTOMATIC ROOM LIGHTING SYSTEM.pptx
AUTOMATIC ROOM LIGHTING SYSTEM is very effective project on a large scale because of the conservation of energy and electricity.
I think that it should have large scale production by multinational companies like TATA etc.
Thankyou for the visit!.
Human presence detection based room light controller using pir2.pptx [repaired]
This document describes a human presence detection system using a PIR sensor to control room lighting. The system aims to automatically turn lights on when a person enters a room and turn them off when the room is empty. It uses a PIR sensor to detect movement and a microcontroller to process the sensor readings and control a relay that switches the lights. The microcontroller is programmed using C language. The system is intended to automatically control room lighting without manual operation, saving energy when the space is unoccupied.
PIR sensors day
Sensors are devices that measure physical quantities and convert them to signals that can be read by observers or instruments, and are used in many everyday objects like touch screens and light dimmers, as well as in applications involving cars, machines, aerospace, medicine, manufacturing, and robotics. PIR sensors in particular detect infrared radiation emitted from warm objects like the human body using a crystalline sensor element and can be used to trigger automatic lighting or security systems when motion is detected.
K041246468
This document describes an automatic fire fighting system that uses various sensors to detect fire conditions and activate a response. The system uses a microcontroller to process signals from temperature, smoke, and flame sensors. If fire is detected, the microcontroller activates a firefighting pump and sends an SMS notification via a GSM module. The system provides visual status feedback through LED indicators and can help extinguish fires and alert owners remotely through wireless communication. It is designed to provide early detection of fires and an automatic response in buildings where fire hazards are high.
Lighting sensors and its importance
This presentation talks about the lighting sensors and various types of light sensors. it states various methods to control light automatically. It includes the information about the Lighting Control Sensor Technologies. Also, its usage and importance in today's world.
Automatic Room Lights Controller Using Arduino & PIR Sensor
The document describes an automatic room light control system using an Arduino microcontroller and PIR motion sensor. The system is designed to automatically turn lights on when motion is detected by the PIR sensor, and turn lights off after a period of no motion. The system components include a PIR sensor to detect motion, an Arduino Uno microcontroller for processing and control, and a relay to control power to the lights. When motion is detected, the PIR sensor sends a signal to the Arduino, which then activates the relay to turn on the lights. After a set time of no motion, the Arduino deactivates the relay to turn off the lights. The system is intended to automatically control room lights to save
Health Monitoring System of Elderly using Wireless Sensor NetworkIjcatr04031005
Wireless-sensor-network-based home monitoring system for elderly activity behaviour involves functional assessment of daily activities. In this paper, we report a mechanism for estimation of elderly well-being condition based on usage of house-hold appliances connected through various sensing units. We define a two new wellness functions to determine the status of the elderly on performing essential daily activities. The modernized system for monitoring and evaluating the essential daily activities was tested at homes for four different elderly persons living alone and the results are encouraging in determining wellness of the elderly.
PIR based security system
This PIR security system is most advanced as of now. This can be implemented in the most secured area under surveillance.
Inclinometer.pptx
A motion detector is a device that contains a motion sensor that detects moving objects and transforms the detection of motion into an electric signal.
The detector is often integrated as a component of a system that automatically performs a task or alerts a user of motion in an area. Motion detectors form a vital component of security, automated lighting control, home control, energy efficiency, and other useful systems.
Ir remote based 6 devices 1 fan
This project uses an infrared remote control to switch on and off up to six home appliances and one fan using an 8-bit microcontroller. The microcontroller receives infrared signals from the remote and decodes them to control the devices. It can control electrical devices with a maximum load of 5 amps up to a range of 10 meters. The microcontroller is programmed using Keil uVision and Pro51 programmer software.
Natural light and artificial lighting
This document discusses different types of indoor lighting, including ambient, task, and accent lighting. It also discusses intelligent lighting systems that use sensors and controls to optimize energy usage based on factors like human presence, daylight, and illuminance levels. Sensors can detect motion, occupancy, and utilize daylight, with passive infrared and high frequency sensors being the main technologies. Precise detection ranges and appropriate mounting heights are important considerations.
Analysis and Construction of a Robot controlled by a Universal Remote Control
This paper aims at controlling a robot that is a tank like vehicle using a universal infrared remote
control. The infrared signal sent from the universal infrared remote control is received by IR receiver and
decoded by the microcontroller PIC16F873A using an algorithm embedded in the microcontroller. The output
from the microcontroller is fed to the motor driver which drives the left and right motors. The robot‟s motor
control can be speed controlled by using PWM/PDM (Pulse Width Modulation/ Pulse Duration Modulation)
technique
Warehouse Managing Robot
Our BTech Final Project Presentation Slide: Wireless Powered WMS Robot.
A Fully Autonomous WMS Robot powered by AtMega 2560 with Artificial Intelligence.
Iaetsd ethernet based intelligent security system
This document describes an Ethernet-based intelligent security system that uses both PIR (pyroelectric infrared) sensors and ultrasonic sensors for intruder detection. The system architecture includes indoor and outdoor sensor groups that detect intruders and trigger a majority voting mechanism (MVM). The MVM then activates indoor PIR and ultrasonic sensors. If the MVM detects an intruder, it triggers an embedded board to power a webcam for capturing images. The document discusses the working of the PIR sensors, ultrasonic sensors, and GSM modem used for remote monitoring and alarm functions. It also provides circuit diagrams and explains the working of the sensor processing, alarm, and GSM interfacing segments of the security system.
Automatic Door Opener using PIR Sensor
This document describes an automatic door opening system using a PIR sensor. When a person approaches within the sensor's range, it sends a signal to the microcontroller to open the door using a motor. The door automatically closes after a fixed time delay if no further movement is detected. The system uses an Arduino, PIR sensor, LCD display, motor driver, and other hardware. It is powered by a battery and is designed to open doors automatically for accessibility purposes in places like malls, hotels, and theaters. Further improvements proposed include adding user counting and upgrading to a closed-circuit TV system for security monitoring.
Smart street light system
This document describes the design of a smart street light system that uses sensors and a microcontroller to automatically control street lights. The system aims to reduce energy waste by switching lights on only when motion is detected and adjusting brightness based on sunlight levels. Key components include infrared and proximity sensors to detect vehicles, an Arduino microcontroller to control the lights, and a light dependent resistor to measure sunlight intensity and determine when to turn lights on or off. The document outlines the problem, objectives, design constraints, system features and components.
Ambient light adaptive LED light dimmer
This document describes the design of an ambient light adaptive LED light dimmer. The dimmer uses a light sensor to detect ambient light levels and adjusts the intensity of an LED accordingly. It functions by using a TSL2561 light sensor, an ATTiny85 microcontroller to output PWM to control an LT3795 LED driver. The LED driver outputs current to an LED based on the PWM signal. It is designed to operate from a 48V input and dim the LED between 20-100 Lux of ambient light. Simulations show the LED driver outputs the proper voltage and current levels to drive the LED. The design aims to provide efficient, low-cost lighting that can operate using renewable energy sources.
IRJET- Intelligent Room Lighting System
This document describes an intelligent room lighting system that monitors and controls light intensity based on ambient light levels and occupancy detection to reduce energy waste. The system uses an LDR to measure ambient light, a PIR sensor to detect occupancy, and a TRIAC voltage regulator and servomotor to adjust light intensity from lightbulbs and window screens accordingly. It aims to automatically provide the desired light level in a room without wasting energy by leaving lights on when not needed. The system is an improvement over conventional manually operated or motion-activated switches that do not consider ambient light levels.
Similar to Automatic room light intensity detection and control using a microprocessor and light sensors (20)
Automatic Room Light Intensity Detection And Control Using A Microprocessor A...
Automatic Room Light Intensity Detection And Control Using A Microprocessor A...
DESIGN OF AN INTELLIGENT AND EFFICIENT LIGHT CONTROL SYSTEM
DESIGN OF AN INTELLIGENT AND EFFICIENT LIGHT CONTROL SYSTEM
Human presence detection based room light controller using pir2.pptx [repaired]
Human presence detection based room light controller using pir2.pptx [repaired]
Automatic Room Lights Controller Using Arduino & PIR Sensor
Automatic Room Lights Controller Using Arduino & PIR Sensor
Health Monitoring System of Elderly using Wireless Sensor NetworkIjcatr04031005
Health Monitoring System of Elderly using Wireless Sensor NetworkIjcatr04031005
Analysis and Construction of a Robot controlled by a Universal Remote Control
Analysis and Construction of a Robot controlled by a Universal Remote Control
More from Ecway2004
Covering points of interest with mobile sensors
Ecway Technologies provides IEEE projects and software developments from its offices located in multiple cities across Tamil Nadu, India. The company's website and contact information is provided.
The document discusses an algorithm for optimizing the autonomous deployment of mobile sensors to cover predefined Points of Interest while maintaining connectivity between the sensors and a base station. Each sensor moves toward a Point of Interest but also maintains connectivity with a subset of neighboring sensors that are part of a Relative Neighborhood Graph, which is reduced to provide global connectivity locally. The deployment scheme aims to minimize connectivity sensors and maximize monitoring sensors. Analytical results, simulations, and a practical implementation demonstrate the efficiency of the algorithm.
Coloring based inter-wban scheduling for mobile wireless body area networks
This document describes a study on inter-WBAN scheduling for mobile wireless body area networks. The study proposes a random incomplete coloring algorithm with low time complexity and high spatial reuse to overcome interference between wireless body area networks. Simulation results show that the proposed coloring algorithm effectively overcomes inter-WBAN interference and supports higher system throughput in various mobile WBAN scenarios compared to conventional coloring methods.
Code modulation based encryption & decryption technique for secure communicat...
This document describes a code modulation based encryption and decryption technique for secure wireless communication. The system has a transmitter section and receiver section, each designed around a microcontroller. At the transmitter, data typed into a PC is encrypted using the microcontroller and transmitted via RF. At the receiver, the encrypted data is received, decoded by the microcontroller, and displayed on the PC. To view the actual data, a password must be entered which decrypts the cipher text into plaintext. The block diagram shows the transmitter components include an encoder, microcontroller, MAX232, and RF transmitter. The receiver components include a decoder, microcontroller, MAX232, and RF receiver.
Clustering sentence level text using a novel fuzzy relational clustering algo...
Ecway Technologies is a software development company with offices in multiple cities in Tamil Nadu, India. They can be contacted via phone or email.
The paper presents a novel fuzzy clustering algorithm that operates on relational input data in the form of a pairwise similarity matrix between objects. The algorithm uses a graph representation and models centrality as likelihood in an Expectation-Maximization framework. Results show the algorithm can identify overlapping clusters of semantically related sentences, demonstrating potential use in text mining tasks. It was also applied successfully to benchmark datasets in other domains.
Clustering large probabilistic graphs
This document summarizes a study on clustering probabilistic graphs. It proposes extending the edit-distance-based definition of graph clustering to probabilistic graphs. Practical approximation algorithms are developed based on establishing a connection between the objective function and correlation clustering. The parameter-free objective function means the number of clusters is part of the output. Methods are developed for testing statistical significance of clusters and handling noisy clusterings. Experiments on real protein-protein interaction and large-scale social networks demonstrate the techniques can discover correct numbers of clusters and identify known relationships.
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
This paper presents a smart driving direction system that leverages taxi drivers' intelligence and experience. GPS-equipped taxis act as mobile sensors to model the dynamic traffic patterns of a city. A time-dependent landmark graph models traffic patterns and experienced drivers' route choices to provide users with the practically fastest route to a destination at a given departure time. A clustering approach estimates travel times between landmarks in different time slots. A two-stage routing algorithm then computes a customized, practically fastest route for the user based on this graph and real-world trajectory data from over 33,000 taxis over three months. Evaluation found that 60-70% of routes suggested were faster than alternatives, with 20% sharing results, and on average routes
Cloudsim ranking on data manifold with sink points
ECWAY Technologies provides IEEE projects and software development services from its offices in multiple cities across India. The document discusses a novel ranking approach called Manifold Ranking with Sink Points (MRSP) that addresses diversity, relevance, and importance in ranking. MRSP uses manifold ranking over a data manifold to find the most relevant objects while turning already ranked objects into "sink points" to prevent redundant objects from receiving a high rank. Experimental results on update summarization and query recommendation tasks show MRSP performs strongly compared to existing ranking approaches by better addressing the importance of diversity in ranking.
Cloudsim quality-differentiated video multicast in multirate wireless networks
This document describes a quality-differentiated video multicast scheme for multirate wireless networks called QDM. QDM aims to provide heterogeneous clients with differentiated video qualities matching their channel conditions. It first proposes a rate scheduling model to select the optimal transmission bitrate for each video frame to maximize total visual quality subject to minimum quality guarantees. It then presents QDM, a practical protocol that constructs a cluster-based structure to characterize heterogeneity and adapts transmission rates based on video quality perceived by cluster heads. Simulation results show QDM can efficiently adapt to network dynamics and variable bitrates, producing a 2-5 dB gain in average video quality over leader-based approaches.
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
The document proposes a power allocation scheme for statistical quality-of-service provisioning in multi-relay cognitive networks. The scheme first chooses between direct transmission or relay transmission based on channel state information. It then performs efficient power allocation according to the transmission mode and given constraints like quality-of-service requirements, average transmit power limits, and peak interference limits. Simulations show the proposed scheme outperforms max-min criterion and equal power allocation policies by achieving higher throughput while involving at most two relays for transmission.
Cloudsim distributed web systems performance forecasting using turning bands...
The document discusses using the Turning Bands method to forecast the performance of distributed web systems. Real-life data was obtained from an experiment monitoring a group of web servers worldwide using an agent system called MWING located in different parts of Poland. The results showed good quality in predicting web performance when European web servers were monitored from an agent in Gliwice, Poland using the Turning Bands method.
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
This document summarizes a paper on distributed processing of probabilistic top-k queries in wireless sensor networks. It introduces the concepts of sufficient and necessary sets, which can facilitate localized data pruning in clusters. It then describes three algorithms - sufficient set-based, necessary set-based, and boundary-based - for intercluster query processing with bounded communication rounds. Finally, it presents an adaptive algorithm that dynamically switches between the three algorithms to minimize transmission cost, and experimental results showing the algorithms significantly reduce data transmission with small constant communication rounds, with the adaptive algorithm performing near-optimally under various conditions.
Civil 2013 titles
This document contains 15 titles for civil engineering projects related to structural analysis. The titles cover topics like analyzing beams, trusses, bridges, dams, and other structures under different loads and conditions using methods like finite element analysis. The analyses will determine factors like deflection, stresses, stability, and performance of the various civil structures.
Chopper based dc motor speed control
This document discusses using a chopper circuit to control the speed of a DC motor. A chopper circuit allows controlling the voltage to the motor by rapidly switching the voltage on and off, which enables remote speed control. This method improves motor efficiency by reducing current, lowers temperatures, shrinks motor size, and increases lifetime compared to previous variable resistor and transformer-based speed control methods. The project will use buttons to vary the firing angle of a MOSFET in the chopper circuit to control motor speed, with lower firing angles providing higher speeds.
Channel assignment for throughput optimization in multichannel multiradio wir...
ECWAY Technologies provides IEEE projects and software developments with offices in multiple cities in Tamil Nadu, India. They can be contacted via phone or email.
The document discusses a channel assignment algorithm for throughput optimization in multi-radio wireless mesh networks using network coding. It formulates the joint problem of random network coding, channel assignment, and broadcast link scheduling while taking into account opportunistic overhearing, interference constraints, coding constraints, number of channels, radios per node, and fairness between unicast connections. An auction-based suboptimal solution is developed for overall network throughput optimization. Performance evaluation shows the algorithm can effectively use multiple radios and channels while addressing fairness issues from the auction, with promising gains over traditional routing
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
The document proposes a hybrid channel allocation and routing approach for multichannel multiradio wireless mesh networks. It presents an Adaptive Dynamic Channel Allocation (ADCA) protocol that considers both throughput and delay for channel assignment. It also proposes an Interference and Congestion Aware Routing (ICAR) protocol for hybrid networks with static and dynamic links that balances channel usage. Simulation results show ADCA reduces packet delay without degrading throughput, and the hybrid approach adapts better to changing traffic than static-only networks with lower overhead and delay than existing hybrid methods.
Casual stereoscopic photo authoring
Ecway Technologies provides software development and IEEE projects services from offices located in multiple cities across India. They can be contacted via phone or email on their website at www.ecwayprojects.com.
The paper presents a method for easy stereoscopic photo authoring using a regular monocular camera. It takes two input images or video frames and transforms them into a stereoscopic image pair for pleasant 3D viewing. This is done through a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. The warping uses spatially-varying mesh-based warps that encode various constraints to best meet the stereoscopic geometry and minimize distortion. Experiments show the
Casual stereoscopic photo authoring
Ecway Technologies provides IEEE projects, software developments, and casual stereoscopic photo authoring. It has offices in multiple cities across India. Ecway's casual stereoscopic photo authoring method takes two images or video frames from a regular monocular camera as input and transforms them into a stereoscopic image pair for 3D viewing. The method uses a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. It formulates the warping problem as a quadratic energy minimization solved using a sparse linear solver. The method also allows local and global disparity adjustments for adapting stereoscopic images to different viewing conditions. Experiments show Ecway's spatially-varying war
Capacity of hybrid wireless mesh networks with random a ps
This paper proposes a hybrid wireless mesh network (WMN) architecture that allows the backbone to utilize random connections to access points (APs) in a wireless local area network (WLAN). Theoretical analysis shows that the capacity of a three-tier hybrid WMN is affected by the number of mesh router cells connected to APs, the ratio of access link bandwidth to backbone link bandwidth, and traffic balance among routers with AP access. Simulation results demonstrate that configuring APs and balancing traffic can significantly improve network capacity in the proposed hybrid architecture by taking advantage of wired connections through APs.
Bomb detection robot with wireless camera
This prototype robot is designed to help bomb squads by remotely detecting bombs and obstacles. It uses sensors to detect metals and obstacles as it moves through an area, sending that information back to operators via a wireless camera and computer. The robot is navigated and directed remotely using the camera while its metal detection, obstacle detection, and location data are sent to a base station for operators to monitor on LED displays and sounds.
Bed side patients monitoring system with emergency alert
The document describes a bedside patient monitoring system that measures temperature data using a portable medical monitoring unit. The unit contains a microcontroller, sensor board, and processing system to manage information, analyze data in real-time, and provide warnings for emergencies or abnormal diagnoses. The system takes a patient's temperature, converts it to digital using an ADC, and sends it to the microcontroller for processing. If the temperature exceeds a threshold, the system sounds a buzzer for notification.
More from Ecway2004 (20)
Coloring based inter-wban scheduling for mobile wireless body area networks
Coloring based inter-wban scheduling for mobile wireless body area networks
Code modulation based encryption & decryption technique for secure communicat...
Code modulation based encryption & decryption technique for secure communicat...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim ranking on data manifold with sink points
Cloudsim ranking on data manifold with sink points
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Capacity of hybrid wireless mesh networks with random a ps
Capacity of hybrid wireless mesh networks with random a ps
Bed side patients monitoring system with emergency alert
Bed side patients monitoring system with emergency alert
Recently uploaded
Pro Tips for Effortless Contract Management
Tired of chasing down expiring contracts and drowning in paperwork? Mastering contract management can significantly enhance your business efficiency and productivity. This guide unveils expert secrets to streamline your contract management process. Learn how to save time, minimize risk, and achieve effortless contract management.
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Enhancing Adoption of AI in Agri-food: Introduction
Introduction to the Panel on: Pathways and Challenges: AI-Driven Technology in Agri-Food, AI4Food, University of Guelph
“Enhancing Adoption of AI in Agri-food: a Path Forward”, 18 June 2024
State of D2C in India: A Logistics Update
The report *State of D2C in India: A Logistics Update* talks about the evolving dynamics of the d2C landscape with a particular focus on how brands navigate the complexities of logistics. Third Party Logistics enablers emerge indispensable partners in facilitating the growth journey of D2C brands, offering cost-effective solutions tailored to their specific needs. As D2C brands continue to expand, they encounter heightened operational complexities with logistics standing out as a significant challenge. Logistics not only represents a substantial cost component for the brands but also directly influences the customer experience. Establishing efficient logistics operations while keeping costs low is therefore a crucial objective for brands. The report highlights how 3PLs are meeting the rising demands of D2C brands, supporting their expansion both online and offline, and paving the way for sustainable, scalable growth in this fast-paced market.
欧洲杯赌球-欧洲杯赌球买球官方官网-欧洲杯赌球比赛投注官网|【网址🎉ac55.net🎉】
【网址🎉ac55.net🎉】欧洲杯赌球是世界上历史最悠久的博彩公司之一。其历史可以追溯到十九世纪末，确切时间是1886年。这家英国公司拥有超过15000名员工，是博彩行业规模最大的公司。欧洲杯赌球是英国最受欢迎的实体博彩公司之一，其排名仅次于欧洲杯赌球，旗下2800家投注站遍布全英国。
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
Slides presented by Phil Hornby, Founder and Director of "for product people", at Cambridge Product Management Network, on Monday 17th June 2024.
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Cover Story - China's Investment Leader - Dr. Alyce SU
In World Expo 2010 Shanghai – the most visited Expo in the World History
https://www.britannica.com/event/Expo-Shanghai-2010
China’s official organizer of the Expo, CCPIT (China Council for the Promotion of International Trade https://en.ccpit.org/) has chosen Dr. Alyce Su as the Cover Person with Cover Story, in the Expo’s official magazine distributed throughout the Expo, showcasing China’s New Generation of Leaders to the World.
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
In this article, we will dive into the extraordinary life of Ellen Burstyn, where the curtains rise on a story that's far more attractive than any script.
PM Surya Ghar Muft Bijli Yojana: Online Application, Eligibility, Subsidies &...
PM Surya Ghar Muft Bijli Yojana: Online Application, Eligibility, Subsidies &...Ksquare Energy Pvt. Ltd.
During the budget session of 2024-25, the finance minister, Nirmala Sitharaman, introduced the “solar Rooftop scheme,” also known as “PM Surya Ghar Muft Bijli Yojana.” It is a subsidy offered to those who wish to put up solar panels in their homes using domestic power systems. Additionally, adopting photovoltaic technology at home allows you to lower your monthly electricity expenses. Today in this blog we will talk all about what is the PM Surya Ghar Muft Bijli Yojana. How does it work? Who is eligible for this yojana and all the other things related to this scheme?DearbornMusic-KatherineJasperFullSailUni
My powerpoint presentation for my Music Retail and Distribution class at Full Sail University
8328958814KALYAN MATKA | MATKA RESULT | KALYAN
8328958814KALYAN MATKA | MATKA RESULT | KALYAN KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Tesla Energy rEVolution And The Golden Age For Copper: Kirill Klip GEM Royalty TNR Gold Copper Presentation
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
Recently uploaded (20)
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
Enhancing Adoption of AI in Agri-food: Introduction
Enhancing Adoption of AI in Agri-food: Introduction
The Steadfast and Reliable Bull: Taurus Zodiac Sign
The Steadfast and Reliable Bull: Taurus Zodiac Sign
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Cover Story - China's Investment Leader - Dr. Alyce SU
Cover Story - China's Investment Leader - Dr. Alyce SU
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
PM Surya Ghar Muft Bijli Yojana: Online Application, Eligibility, Subsidies &...
PM Surya Ghar Muft Bijli Yojana: Online Application, Eligibility, Subsidies &...
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Automatic room light intensity detection and control using a microprocessor and light sensors
- 1. AUTOMATIC ROOM LIGHT INTENSITY DETECTION AND CONTROL USING A MICROPROCESSOR AND LIGHT SENSORS ABSTRACT In this paper we propose a design using both a microprocessor and light sensors for automatic room light detection and control. Our design, the HLCM (Home Light Control Module) which will be installed in every light fixture of a family, is made up of four blocks: the pyro electric infrared (PIR) sensor circuit, the light sensor circuit, the microprocessor and the RF module. By using the PIR sensor circuit, the HLCM detects if a human body enters the detection area or not. If there is no human body present, all controlled lights are turned off. If there is, the HLCM detects the light intensity under the environment and maintains sufficient light by controlling the number of lights. We have also integrated an RF module to transmit and receive the data from each HLCM so we can control different lights in different regions. The result of using the HLCM shows that the total power consumption can be reduced