Automated Tip-on-Tip Cannabis Filtration
•
0 likes•7 views
Tip-on-Tip (ToT) Filtration provides removal of course and fine particulates from cannabis samples after grinding and homogenization. Eliminate clogging and increase the life-time of chromatographic columns. Filtration tips are easy to integrate into an existing workflow using manual pipettors or automated liquid handlers.
Report
Share
Report
Share
Download to read offline
Recommended
Different types of industrial filters
Fil-Trek Corporation offers bag and cartridge filter housings, as well as industrial filters for many industries. They are located at 70 Fleming Dr Cambridge, ON N1T 2B1 (519) 623-7448.
Industrial filters
Enviro Tech Industrial Products offers a wide range of industrial filters for applications such as air and water pollution analysis, liquid clarification, and cell harvesting. Their filter product line includes fine filters, pre-filters, HVAC filters, HEPA filters, bag filters, carbon filters, fuel filters, and oil filters. The filters are manufactured using materials like non-woven synthetic media, activated charcoal, and expanded metal mesh in various micron ratings and sizes.
Peridox RTU new literature piece
This document describes a sporicidal disinfectant and cleaner called PeridoxRTU. It kills spores as well as various pathogens like C. difficile and MRSA in as little as 3 minutes, faster than diluted bleach or hydrogen peroxide solutions. PeridoxRTU is EPA-registered, contains no alcohol or bleach, and leaves no residue. It is suitable for use in pharmacy cleanrooms to meet cleaning standards.
The importance of industrial water filtration
Industrial water filtration is crucial across many industries to remove unwanted particles from water and ensure processes run smoothly. It typically involves filtering particles larger than 0.5 microns using commercial filters like bag filters and cartridge filters. The type and number of filters needed depends on factors like suspended solids levels, water volumes, and desired post-filtration quality. Poor industrial water filtration can lead to contaminated products, recalls, and regulatory or health issues depending on the industry.
Depth Filter flyer - final
This document summarizes the features and specifications of a depth cartridge filter. The filter is made of PET material, which allows it to be used for filtering liquids like water, oils, and acid solutions at temperatures up to 90°C. It has a novel gradient design that provides high filtration efficiency, high dirt holding capacity, and good contaminant retention along with low pressure drop. The filter media can be customized in terms of weight, width, diameter and other properties to meet user requirements.
Paper Making Process by Nirjhar
Dear Readers,
The presentation may be helpful for those who wants to know the basic concept of paper making process.
Please post your valuable comments improve the quality of presentation.
Regards,
Nirjhar.
clariant
Clariant has various environmental, safety, and health measures in place. They treat hazardous waste from their plants and send it to waste management sites to be properly disposed of. They also have extensive water and air pollution controls, including water treatment plants and jet scrubbers. The company provides protective equipment to all employees and has health and safety protocols. Their pigment plant uses a plate and frame filter press in the filtration process and a tray dryer to dry the product cake.
Everpure High Flow CSR Triple MC2 System
Our High Flow CSR-MC2 System delivers premium quality water to high flow fountain, coffee and ice machine applications, increasing the overall efficiency of related foodservice equipment.
Recommended
Different types of industrial filters
Fil-Trek Corporation offers bag and cartridge filter housings, as well as industrial filters for many industries. They are located at 70 Fleming Dr Cambridge, ON N1T 2B1 (519) 623-7448.
Industrial filters
Enviro Tech Industrial Products offers a wide range of industrial filters for applications such as air and water pollution analysis, liquid clarification, and cell harvesting. Their filter product line includes fine filters, pre-filters, HVAC filters, HEPA filters, bag filters, carbon filters, fuel filters, and oil filters. The filters are manufactured using materials like non-woven synthetic media, activated charcoal, and expanded metal mesh in various micron ratings and sizes.
Peridox RTU new literature piece
This document describes a sporicidal disinfectant and cleaner called PeridoxRTU. It kills spores as well as various pathogens like C. difficile and MRSA in as little as 3 minutes, faster than diluted bleach or hydrogen peroxide solutions. PeridoxRTU is EPA-registered, contains no alcohol or bleach, and leaves no residue. It is suitable for use in pharmacy cleanrooms to meet cleaning standards.
The importance of industrial water filtration
Industrial water filtration is crucial across many industries to remove unwanted particles from water and ensure processes run smoothly. It typically involves filtering particles larger than 0.5 microns using commercial filters like bag filters and cartridge filters. The type and number of filters needed depends on factors like suspended solids levels, water volumes, and desired post-filtration quality. Poor industrial water filtration can lead to contaminated products, recalls, and regulatory or health issues depending on the industry.
Depth Filter flyer - final
This document summarizes the features and specifications of a depth cartridge filter. The filter is made of PET material, which allows it to be used for filtering liquids like water, oils, and acid solutions at temperatures up to 90°C. It has a novel gradient design that provides high filtration efficiency, high dirt holding capacity, and good contaminant retention along with low pressure drop. The filter media can be customized in terms of weight, width, diameter and other properties to meet user requirements.
Paper Making Process by Nirjhar
Dear Readers,
The presentation may be helpful for those who wants to know the basic concept of paper making process.
Please post your valuable comments improve the quality of presentation.
Regards,
Nirjhar.
clariant
Clariant has various environmental, safety, and health measures in place. They treat hazardous waste from their plants and send it to waste management sites to be properly disposed of. They also have extensive water and air pollution controls, including water treatment plants and jet scrubbers. The company provides protective equipment to all employees and has health and safety protocols. Their pigment plant uses a plate and frame filter press in the filtration process and a tray dryer to dry the product cake.
Everpure High Flow CSR Triple MC2 System
Our High Flow CSR-MC2 System delivers premium quality water to high flow fountain, coffee and ice machine applications, increasing the overall efficiency of related foodservice equipment.
Automatic Dispensing Machine for Textile Dyeing Lab
An important study for Textile Engineers on Automatic Dispensing machine which will help for the beginners.
Scouring
Scouring is a process that removes natural and added impurities from textiles through the use of chemicals like alkalis and surfactants. It saponifies fats and waxes, breaks down proteins and pectins, and increases the textile's absorptive capacity. The type of scouring agent used depends on the fiber and extent of impurities. Scouring emulsifies and saponifies impurities to solubilize and suspend them for removal, improving dyeability and finish performance.
Dryers
This document provides an overview of grain drying methods and dryer classification. It begins with an introduction to drying as a method for conditioning grains through moisture removal. Common drying methods are then described, including conduction, convection and radiation. Grain dryers are classified based on thin layer drying vs deep bed drying principles. Various mechanical dryer types are also outlined, including sack, rotary, continuous flow, tray, spray, freeze, vacuum, dielectric, electrical, infrared and fluidized bed dryers. Optimal moisture contents for storing different crops are listed. In conclusion, the document states that dryers play an important role in food security by allowing crops to be stored safely below their critical moisture levels.
Preparation of Poly Acrylate Binder
This document outlines the preparation of a poly acrylate binder for pigment printing. It discusses selecting monomers like butyl acrylate, ethyl acrylate, and methyl methacrylate. A recipe is provided using these monomers along with acrylic acid and N-hydroxymethyl acrylamide. The procedure for emulsion polymerization is described in 7 steps, beginning with emulsifying the monomers and ending with drying the purified polymer. The calculated glass transition temperature of the polymer is 180°C, making it suitable for use as a pigment printing binder.
Auto dosing and dispensing systems For Dye house
1. The document describes an auto dosing and dispensing system for dye houses that automatically measures and dispenses dyes and chemicals.
2. The system includes storage silos for salt and soda, mixing tanks for solutions, and 15 dispensing tanks for chemicals like hydrogen peroxide and auxiliaries.
3. Dyes, chemicals, and auxiliaries are gravity fed from the dispensing tanks to dyeing machines through stainless steel tubes controlled by the computer system.
TEXTILE MANUFACTURING PROCESS
Rerouting rope-guides, which determine the route fabrics take through dyeing machines, reduced water use by 6.2% on average for 5 dye recipes. Counter-current washing, where wastewater is recycled from the last wash step to the next, reduced consumption by 50-80% compared to normal flow washing and showed decreasing pollution concentrations from the first to last wash tanks. Both techniques provide simple, effective ways to minimize water and wastewater in textile dyeing and finishing.
Panel filters
arsha Filters is steadily growing in the industry, since its inception. Based in Bangalore (Karnataka), the company is renowned as an eminent Manufacturer, Exporter, and Supplier of Industrial Filters, Industrial Filter Elements, Filter Cartridges, Pulse Jet Dust Collection System and Industrial Strainers, in India. The products, that we provide, comply with international quality standards and have been proved to be exceptionally efficient and cost effective for the end users.
Presentation on Textile Desizing
Desizing is the process of removing size material from warp yarns in woven fabrics to facilitate weaving. Size is applied before weaving to prevent breakage on the loom but must be removed before dyeing and finishing. There are two main methods of desizing - hydrolytic and oxidative. Hydrolytic methods like enzymatic desizing use enzymes like amylase to hydrolyze and reduce the molecular weight of starch size. Oxidative desizing uses oxidizing agents like bromides but risks damaging the cellulose fibers. Complete removal of size is important for effective dyeing and is tested by checking for color change or measuring weight loss in the fabric.
Presentation on candle filter bag
The document discusses candle filters, which use cylindrical tubes to filter slurry from the outside in. The tubes accumulate cake on the inside, which is discharged through pulsing. Candle filters work by pressure and have a pre-coating stage followed by slurry pumping and cake formation. The cake is then removed by vacuum. Key specifications are an area of 50-150 m^2, vessel diameter of 2-3 m, and cake thickness of 50-100mm. It can operate under 6 bars of pressure. Components include filtrate, tubes, inlet, scavenger, air vent, screw jet, and cake discharge outlet.
Woven dyeing process
This document provides details about various woven dyeing processes. It begins with an introduction to dyeing technology and lists the main types of fabrics - woven, knitted, and non-woven. It then outlines the typical steps in woven fabric dyeing, from inspection to packing. Several dyeing methods are described, including direct dyeing and yarn dyeing. Key dyeing machines like jet, overflow, airflow and jigger dyeing machines are explained. Limitations of jigger dyeing are also noted.
Lecture 2 preparatory processes
The document discusses various preparatory processes for cotton textiles including desizing, scouring, and bleaching. Desizing involves removing added starches used in sizing through processes like hydrolysis or oxidation. Scouring uses alkaline solutions to remove natural impurities like fats, waxes, pectins and proteins from cotton. Bleaching removes color pigments through oxidation, with common bleaching agents being sodium hypochlorite, hydrogen peroxide, and peracetic acid. These preparatory processes are important to remove impurities, improve dyeability and finishability of cotton textiles.
Paper mill factory final project
The document discusses plans for a paper manufacturing company in Malaysia. It outlines goals of targeting the Malaysian market and export markets, utilizing available raw materials, and improving competitiveness and management practices. It then details objectives to be a long-term market leader in Malaysia, expand to foreign markets, increase production quality, and ensure raw material availability and improved management. Finally, it discusses the paper making process, required equipment, manufacturing strategies, and economic factors of the industry.
Desizing
1. Desizing is done to remove sizing agents like starch that were applied to warp yarns during weaving to facilitate the weaving process.
2. There are several methods of desizing including enzymatic, acid, and oxidative methods. Enzymatic desizing uses enzymes like amylase to break down starch into soluble sugars.
3. Proper control of factors like temperature, pH, and fabric speed are important for effective desizing when using the enzymatic method.
Desizing
This document discusses various methods for desizing fabric after weaving to remove starch paste. It describes the objectives of desizing as removing starch paste to increase fabric absorbency, affinity for dry chemicals, and suitability for downstream processes. The key desizing methods discussed are rot steeping, acidic desizing using hydrochloric or sulfuric acid, alkaline desizing using caustic soda, enzymatic desizing using amylase enzymes, and oxidative desizing using chlorine or bromine. Each method is explained in terms of its process, advantages, and disadvantages. Enzymatic desizing is noted as requiring less time and avoiding fibre damage compared to other methods. Proper control of temperature, pH, and time is important for
Effect of cold enzyme washing on physical and
This document discusses the effect of cold enzyme washing on cotton-tencel denim fabrics. It introduces tencel fiber and its use in denim fabrics. Cold enzyme washing is proposed as an environmentally friendly alternative to conventional enzyme washing that uses lower temperatures. The document outlines the cold enzyme washing process and provides data on the weight loss, k/s values, GSM change, color fastness, and wicking ability of cotton-tencel samples after being cold enzyme washed. Further testing of properties like tensile strength, thickness, air permeability, pilling, and tearing strength is recommended.
Wet processing introduction ppt
The document discusses wet processing in the textile industry. Wet processing includes bleaching, dyeing, printing, and finishing processes. There are three main types of wet processing: 1) Preparation processes like scouring and bleaching ensure the textile has properties for coloring or finishing. 2) Coloration processes like dyeing and printing add color for aesthetic or functional purposes. 3) Finishing processes provide properties demanded by the end use, such as water repellency or flame retardancy, and occur last to enhance fiber properties. Wet processing transforms raw fibers into a finished textile product.
DESIZING
1. Desizing is the process of removing size material from warp yarns in woven fabrics to facilitate weaving. Sizing agents are selected based on fabric type.
2. Size comes from coating warp yarns with sizing agents before weaving to decrease breakage and improve productivity. However, sizing agents resist dyes and chemicals used in textile processing, so must be removed before wet processing.
3. Common desizing methods include acid desizing using dilute acids, enzymatic desizing using enzymes to degrade starch size, and desizing on a jigger using hot water and amylase in an impregnation stage followed by washing.
Technical development of wet processing
This document discusses recent technical developments in wet processing for the textile industry. It covers innovations in dyes and chemicals, preparation, dyeing, printing, finishing, digital printing, biotechnology, nanotechnology, and ultrasonic textile processing. New environmentally friendly products are highlighted from companies like Archroma, Americhem, HeiQ Materials, and Novozymes. Machinery innovations from Benninger focus on reducing the carbon footprint and environmental impact of wet processing.
Textile chemical processing
This presentation is my graduation internship presentation at BSL (LNJ group) Bhilwara (Rajasthan).
In this presentation I describe BSL company profile, Process significance, all steps which use for fibre to fabric in textile.
Dampening Solution Fine Filtration System
This simple fine filtration system will reduce wastage in your press room while protecting the environment. Go green with alpha.f!
3-RWM5.0_EN-Brochure 032022 Panel Filter.pdf
Nanofiber is the Best Technology Available Today for Filtering Fine Dust, Bacteria,
Pollen and Harmful Particles in the Air. Filters All Particles up to 150nm.
Uses Nanofiber
Technology to
Provide High Levels
of Filtration.
Air Handling
RoofTop, Fan-Coil
Units, VAM, Grilles
etc. Used in all air
conditioning
systems.
Test approved by
the world's best
laboratories such as
TUV, NELSON,
EMPA, SUZ, TEC,
WIPO.
NanoFiber Filter, CONTINUOUS AND
RELIABLE CLEAN AIR SOURCE
Provides. Perfect Filtering
Device Thanks to its Performance
Evaporators Do Not Contaminate. Bag
Filters You Don't Need To Use. (F5-F6-F7)
Standard G2 - G3 - G4 Cassette Filters are installed instead of.
Filter Frame Thickness Size 3 mm - 300mm range It can be made for all sizes.
Working places
Excellent Features
Unique Protection
Office - Workspaces
Shopping malls
Hospitals - Health Centers
Hotels
Factories - Production Areas
Clean Air in All Conditions
Washable
Long Service Life
Aluminum Frame
Suitable for All Sizes and
Devices
Filters Exhaust Smoke
Filters Ultra Fine Dust
Pollen, Bacteria, Pathogen
Does not contain harmful chemicals
Prevents Bad Odors
Nanofiber membrane creates a mechanical barrier which prevents the penetration of
dangerous particles without using any dangerous chemical substances.
What do you gain by incorporating nanofiber
window membrane into your portfolio?
A solution that will provide a continuous, reliable and healthy supply of clean air
A premium product with high added value without the need for new equipment and
filter investments Innovative, modern technology product demanded worldwide
Reduced device service costs
Minimizing the failures of moving parts such as fans
Feel the trust of Focal Filter, the world's leading nanofiber technology company
Contact Us
Tel: +90 911 0 565
info@focalfiltre.com
BatıSitesi St. 2305/1 N.25
Yenimahalle /ANKARA/TURKEY
www.focalfilter.com
Lv1 bio beers pdf
The new LV1 Microfluidizer processor allows for high pressure processing of small sample volumes between 1-20ml with near total sample recovery. It is well-suited for applications in research and development, discovery, exploratory studies, and small clinical studies due to its scalability and ability to process small volumes. The LV1 provides consistent shear rates and particle size reduction performance comparable to larger Microfluidizer systems.
More Related Content
What's hot
Automatic Dispensing Machine for Textile Dyeing Lab
An important study for Textile Engineers on Automatic Dispensing machine which will help for the beginners.
Scouring
Scouring is a process that removes natural and added impurities from textiles through the use of chemicals like alkalis and surfactants. It saponifies fats and waxes, breaks down proteins and pectins, and increases the textile's absorptive capacity. The type of scouring agent used depends on the fiber and extent of impurities. Scouring emulsifies and saponifies impurities to solubilize and suspend them for removal, improving dyeability and finish performance.
Dryers
This document provides an overview of grain drying methods and dryer classification. It begins with an introduction to drying as a method for conditioning grains through moisture removal. Common drying methods are then described, including conduction, convection and radiation. Grain dryers are classified based on thin layer drying vs deep bed drying principles. Various mechanical dryer types are also outlined, including sack, rotary, continuous flow, tray, spray, freeze, vacuum, dielectric, electrical, infrared and fluidized bed dryers. Optimal moisture contents for storing different crops are listed. In conclusion, the document states that dryers play an important role in food security by allowing crops to be stored safely below their critical moisture levels.
Preparation of Poly Acrylate Binder
This document outlines the preparation of a poly acrylate binder for pigment printing. It discusses selecting monomers like butyl acrylate, ethyl acrylate, and methyl methacrylate. A recipe is provided using these monomers along with acrylic acid and N-hydroxymethyl acrylamide. The procedure for emulsion polymerization is described in 7 steps, beginning with emulsifying the monomers and ending with drying the purified polymer. The calculated glass transition temperature of the polymer is 180°C, making it suitable for use as a pigment printing binder.
Auto dosing and dispensing systems For Dye house
1. The document describes an auto dosing and dispensing system for dye houses that automatically measures and dispenses dyes and chemicals.
2. The system includes storage silos for salt and soda, mixing tanks for solutions, and 15 dispensing tanks for chemicals like hydrogen peroxide and auxiliaries.
3. Dyes, chemicals, and auxiliaries are gravity fed from the dispensing tanks to dyeing machines through stainless steel tubes controlled by the computer system.
TEXTILE MANUFACTURING PROCESS
Rerouting rope-guides, which determine the route fabrics take through dyeing machines, reduced water use by 6.2% on average for 5 dye recipes. Counter-current washing, where wastewater is recycled from the last wash step to the next, reduced consumption by 50-80% compared to normal flow washing and showed decreasing pollution concentrations from the first to last wash tanks. Both techniques provide simple, effective ways to minimize water and wastewater in textile dyeing and finishing.
Panel filters
arsha Filters is steadily growing in the industry, since its inception. Based in Bangalore (Karnataka), the company is renowned as an eminent Manufacturer, Exporter, and Supplier of Industrial Filters, Industrial Filter Elements, Filter Cartridges, Pulse Jet Dust Collection System and Industrial Strainers, in India. The products, that we provide, comply with international quality standards and have been proved to be exceptionally efficient and cost effective for the end users.
Presentation on Textile Desizing
Desizing is the process of removing size material from warp yarns in woven fabrics to facilitate weaving. Size is applied before weaving to prevent breakage on the loom but must be removed before dyeing and finishing. There are two main methods of desizing - hydrolytic and oxidative. Hydrolytic methods like enzymatic desizing use enzymes like amylase to hydrolyze and reduce the molecular weight of starch size. Oxidative desizing uses oxidizing agents like bromides but risks damaging the cellulose fibers. Complete removal of size is important for effective dyeing and is tested by checking for color change or measuring weight loss in the fabric.
Presentation on candle filter bag
The document discusses candle filters, which use cylindrical tubes to filter slurry from the outside in. The tubes accumulate cake on the inside, which is discharged through pulsing. Candle filters work by pressure and have a pre-coating stage followed by slurry pumping and cake formation. The cake is then removed by vacuum. Key specifications are an area of 50-150 m^2, vessel diameter of 2-3 m, and cake thickness of 50-100mm. It can operate under 6 bars of pressure. Components include filtrate, tubes, inlet, scavenger, air vent, screw jet, and cake discharge outlet.
Woven dyeing process
This document provides details about various woven dyeing processes. It begins with an introduction to dyeing technology and lists the main types of fabrics - woven, knitted, and non-woven. It then outlines the typical steps in woven fabric dyeing, from inspection to packing. Several dyeing methods are described, including direct dyeing and yarn dyeing. Key dyeing machines like jet, overflow, airflow and jigger dyeing machines are explained. Limitations of jigger dyeing are also noted.
Lecture 2 preparatory processes
The document discusses various preparatory processes for cotton textiles including desizing, scouring, and bleaching. Desizing involves removing added starches used in sizing through processes like hydrolysis or oxidation. Scouring uses alkaline solutions to remove natural impurities like fats, waxes, pectins and proteins from cotton. Bleaching removes color pigments through oxidation, with common bleaching agents being sodium hypochlorite, hydrogen peroxide, and peracetic acid. These preparatory processes are important to remove impurities, improve dyeability and finishability of cotton textiles.
Paper mill factory final project
The document discusses plans for a paper manufacturing company in Malaysia. It outlines goals of targeting the Malaysian market and export markets, utilizing available raw materials, and improving competitiveness and management practices. It then details objectives to be a long-term market leader in Malaysia, expand to foreign markets, increase production quality, and ensure raw material availability and improved management. Finally, it discusses the paper making process, required equipment, manufacturing strategies, and economic factors of the industry.
Desizing
1. Desizing is done to remove sizing agents like starch that were applied to warp yarns during weaving to facilitate the weaving process.
2. There are several methods of desizing including enzymatic, acid, and oxidative methods. Enzymatic desizing uses enzymes like amylase to break down starch into soluble sugars.
3. Proper control of factors like temperature, pH, and fabric speed are important for effective desizing when using the enzymatic method.
Desizing
This document discusses various methods for desizing fabric after weaving to remove starch paste. It describes the objectives of desizing as removing starch paste to increase fabric absorbency, affinity for dry chemicals, and suitability for downstream processes. The key desizing methods discussed are rot steeping, acidic desizing using hydrochloric or sulfuric acid, alkaline desizing using caustic soda, enzymatic desizing using amylase enzymes, and oxidative desizing using chlorine or bromine. Each method is explained in terms of its process, advantages, and disadvantages. Enzymatic desizing is noted as requiring less time and avoiding fibre damage compared to other methods. Proper control of temperature, pH, and time is important for
Effect of cold enzyme washing on physical and
This document discusses the effect of cold enzyme washing on cotton-tencel denim fabrics. It introduces tencel fiber and its use in denim fabrics. Cold enzyme washing is proposed as an environmentally friendly alternative to conventional enzyme washing that uses lower temperatures. The document outlines the cold enzyme washing process and provides data on the weight loss, k/s values, GSM change, color fastness, and wicking ability of cotton-tencel samples after being cold enzyme washed. Further testing of properties like tensile strength, thickness, air permeability, pilling, and tearing strength is recommended.
Wet processing introduction ppt
The document discusses wet processing in the textile industry. Wet processing includes bleaching, dyeing, printing, and finishing processes. There are three main types of wet processing: 1) Preparation processes like scouring and bleaching ensure the textile has properties for coloring or finishing. 2) Coloration processes like dyeing and printing add color for aesthetic or functional purposes. 3) Finishing processes provide properties demanded by the end use, such as water repellency or flame retardancy, and occur last to enhance fiber properties. Wet processing transforms raw fibers into a finished textile product.
DESIZING
1. Desizing is the process of removing size material from warp yarns in woven fabrics to facilitate weaving. Sizing agents are selected based on fabric type.
2. Size comes from coating warp yarns with sizing agents before weaving to decrease breakage and improve productivity. However, sizing agents resist dyes and chemicals used in textile processing, so must be removed before wet processing.
3. Common desizing methods include acid desizing using dilute acids, enzymatic desizing using enzymes to degrade starch size, and desizing on a jigger using hot water and amylase in an impregnation stage followed by washing.
Technical development of wet processing
This document discusses recent technical developments in wet processing for the textile industry. It covers innovations in dyes and chemicals, preparation, dyeing, printing, finishing, digital printing, biotechnology, nanotechnology, and ultrasonic textile processing. New environmentally friendly products are highlighted from companies like Archroma, Americhem, HeiQ Materials, and Novozymes. Machinery innovations from Benninger focus on reducing the carbon footprint and environmental impact of wet processing.
Textile chemical processing
This presentation is my graduation internship presentation at BSL (LNJ group) Bhilwara (Rajasthan).
In this presentation I describe BSL company profile, Process significance, all steps which use for fibre to fabric in textile.
What's hot (19)
Automatic Dispensing Machine for Textile Dyeing Lab
Automatic Dispensing Machine for Textile Dyeing Lab
Similar to Automated Tip-on-Tip Cannabis Filtration
Dampening Solution Fine Filtration System
This simple fine filtration system will reduce wastage in your press room while protecting the environment. Go green with alpha.f!
3-RWM5.0_EN-Brochure 032022 Panel Filter.pdf
Nanofiber is the Best Technology Available Today for Filtering Fine Dust, Bacteria,
Pollen and Harmful Particles in the Air. Filters All Particles up to 150nm.
Uses Nanofiber
Technology to
Provide High Levels
of Filtration.
Air Handling
RoofTop, Fan-Coil
Units, VAM, Grilles
etc. Used in all air
conditioning
systems.
Test approved by
the world's best
laboratories such as
TUV, NELSON,
EMPA, SUZ, TEC,
WIPO.
NanoFiber Filter, CONTINUOUS AND
RELIABLE CLEAN AIR SOURCE
Provides. Perfect Filtering
Device Thanks to its Performance
Evaporators Do Not Contaminate. Bag
Filters You Don't Need To Use. (F5-F6-F7)
Standard G2 - G3 - G4 Cassette Filters are installed instead of.
Filter Frame Thickness Size 3 mm - 300mm range It can be made for all sizes.
Working places
Excellent Features
Unique Protection
Office - Workspaces
Shopping malls
Hospitals - Health Centers
Hotels
Factories - Production Areas
Clean Air in All Conditions
Washable
Long Service Life
Aluminum Frame
Suitable for All Sizes and
Devices
Filters Exhaust Smoke
Filters Ultra Fine Dust
Pollen, Bacteria, Pathogen
Does not contain harmful chemicals
Prevents Bad Odors
Nanofiber membrane creates a mechanical barrier which prevents the penetration of
dangerous particles without using any dangerous chemical substances.
What do you gain by incorporating nanofiber
window membrane into your portfolio?
A solution that will provide a continuous, reliable and healthy supply of clean air
A premium product with high added value without the need for new equipment and
filter investments Innovative, modern technology product demanded worldwide
Reduced device service costs
Minimizing the failures of moving parts such as fans
Feel the trust of Focal Filter, the world's leading nanofiber technology company
Contact Us
Tel: +90 911 0 565
info@focalfiltre.com
BatıSitesi St. 2305/1 N.25
Yenimahalle /ANKARA/TURKEY
www.focalfilter.com
Lv1 bio beers pdf
The new LV1 Microfluidizer processor allows for high pressure processing of small sample volumes between 1-20ml with near total sample recovery. It is well-suited for applications in research and development, discovery, exploratory studies, and small clinical studies due to its scalability and ability to process small volumes. The LV1 provides consistent shear rates and particle size reduction performance comparable to larger Microfluidizer systems.
Wandres+dietronic light
This document describes a combined brusher and oiler unit that can clean and lubricate metal parts during production. It discusses the benefits of cleaning parts to reduce scrap and improve safety. It then compares brush cleaning to washing methods and outlines the advantages of brush cleaning like constant quality and no need for washing medium. The document provides details on the unit's brush and oiling components and controls. It emphasizes the unit's ability to save energy and lubricant while protecting the environment.
Innovative Products for Hotel Housekeeping & Commercial Laundries
This presentation describes some of the innovative new products by Tanishka Products India for Hotel Housekeeping & Commercial Laundries
Dhruti Avlani - TLC & HPTLC
Various chromatographic techniques can be employed for the qualitative and quantitative analysis of the drug. It is observed that HPTLC is the most widely used Chromatography instrument as it consumes less solvent for developing in less time. Reproducibility of results is also easy.
Oil Mist Collector /Eliminator for Clean Air
The REX oil mist collector /eliminator design minimizes the reliance on filters, is suitable for high mist applications provides exceptional fluid drainage and air quality exhaust, low maintenance and life-cycle cost.
Fume Extraction Systems by Powertech Pollution Controls Private Limited Benga...
Fume Extraction Systems by Powertech Pollution Controls Private Limited Benga...IndiaMART InterMESH Limited
Started to create milestones, we Powertech Pollution Controls Private Limited marked our presence in the year 1996 and operates in the manufacturing/servicing of Dust Extractor Arm, Dust Bag Filter, Fume Extractor Arm, Fume Extractor, Fume Killer since 15 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Dust Extractor Arm, Dust Bag Filter, Fume Extractor Arm, Fume Extractor, Fume Killer, Fume Extraction Systems that has made us to deepen our roots in the market. We Powertech Pollution Controls Private Limited breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
Cleaning & sanitization
The document discusses cleaning and sanitization procedures at Emami units. It finds very poor audit scores and major gaps in prerequisite programs for master cleaning and sanitization. It emphasizes the importance of expert cleaning and sanitization methods, chemicals, frequencies and microbial control to protect finished products. It outlines standard solutions, areas, frequencies and how various cleaning agents like caustic soda, teepol and sanitizers like lysol, phenyl and IPA work. It also discusses sanitization of equipment, CIP, pest control, air filters and personal hygiene fundamentals. Key learnings are that SOPs must be justified by chemistry and applied uniformly as a benchmark for effective cleaning and sanitization.
Supersonics Bin Washing Machines
Detailed catalog of different Bin Washing Machines by Supersonics Industries including some recent developments. Best in market machines offering unmatched performance in difficult-to-clean applications.
INTip solid phase extraction
INTip SPE utilizes a patented technology known as Dispersive Pipette XTRaction. This device is unique from all other SPE devices because sorbent is loosely contained within a pipette tip.
This technology enables INTip solid phase extraction for easy sample preparation. The disperser helps to perturb the sample solution and loose sorbent during aspirate and dispense steps. This mixing provides a highly efficient interaction of the sorbent with the analyte of interest resulting in ideal analyte recoveries.
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalogDepuratori Acqua Osmosi Inversa Addolcitori Sinergroup
Microfiltration is a filtration process that removes solid particles from water, by passing through filters with filtering density from 10 to 0.1 microns. Improves water features that is already good. Microfiltration removes chlorine from water, microorganisms, sediment, rust, odor, color, taste, cloudiness, making it crystal clear, good to drink and for all alimentary purpose, food production, boiling broths, soups and pasta cooking ideal for all the family and is also available in 2-way version, with sparkling water. Microfiltration does not discard water and does not remove minerals leaving unaltered (TDS). The system operates in vertical or horizontal position depending by model selected, takes up very little space and can be placed under the sink. D.M. 25, D.M. 174 Certified. Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalogDepuratori Acqua Osmosi Inversa Addolcitori Sinergroup
Microfiltration is a filtration process that removes solid particles from water, by passing through filters with filtering density from 10 to 0.1 microns. Improves water features that is already good. Microfiltration removes chlorine from water, microorganisms, sediment, rust, odor, color, taste, cloudiness, making it crystal clear, good to drink and for all alimentary purpose, food production, boiling broths, soups and pasta cooking ideal for all the family and is also available in 2-way version, with sparkling water. Microfiltration does not discard water and does not remove minerals leaving unaltered (TDS). The system operates in vertical or horizontal position depending by model selected, takes up very little space and can be placed under the sink. D.M. 25, D.M. 174 Certified. Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalogDepuratori Acqua Osmosi Inversa Addolcitori Sinergroup
Microfiltration is a filtration process that removes solid particles from water, by passing through filters with filtering density from 10 to 0.1 microns. Improves water features that is already good. Microfiltration removes chlorine from water, microorganisms, sediment, rust, odor, color, taste, cloudiness, making it crystal clear, good to drink and for all alimentary purpose, food production, boiling broths, soups and pasta cooking ideal for all the family and is also available in 2-way version, with sparkling water. Microfiltration does not discard water and does not remove minerals leaving unaltered (TDS). The system operates in vertical or horizontal position depending by model selected, takes up very little space and can be placed under the sink. D.M. 25, D.M. 174 Certified. Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalogDepuratori Acqua Osmosi Inversa Addolcitori Sinergroup
Microfiltration is a filtration process that removes solid particles from water, by passing through filters with filtering density from 10 to 0.1 microns. Improves water features that is already good. Microfiltration removes chlorine from water, microorganisms, sediment, rust, odor, color, taste, cloudiness, making it crystal clear, good to drink and for all alimentary purpose, food production, boiling broths, soups and pasta cooking ideal for all the family and is also available in 2-way version, with sparkling water. Microfiltration does not discard water and does not remove minerals leaving unaltered (TDS). The system operates in vertical or horizontal position depending by model selected, takes up very little space and can be placed under the sink. D.M. 25, D.M. 174 Certified. Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalogDepuratori Acqua Osmosi Inversa Addolcitori Sinergroup
Microfiltration is a filtration process that removes solid particles from water, by passing through filters with filtering density from 10 to 0.1 microns. Improves water features that is already good. Microfiltration removes chlorine from water, microorganisms, sediment, rust, odor, color, taste, cloudiness, making it crystal clear, good to drink and for all alimentary purpose, food production, boiling broths, soups and pasta cooking ideal for all the family and is also available in 2-way version, with sparkling water. Microfiltration does not discard water and does not remove minerals leaving unaltered (TDS). The system operates in vertical or horizontal position depending by model selected, takes up very little space and can be placed under the sink. D.M. 25, D.M. 174 Certified. Mammoth
The Mammoth is an automated powder dosing system designed for analytical laboratories requiring precision, accuracy, speed and quality control. It features fully enclosed dosing of powder samples into various containers while minimizing exposure risks. The system provides high throughput levels and sample traceability through independent balances, vibration isolation, and RFID/barcode scanning. It also offers superior cleaning methods and lowest cross-contamination levels in its class.
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalogDepuratori Acqua Osmosi Inversa Addolcitori Sinergroup
Microfiltration is a filtration process that removes solid particles from water, by passing through filters with filtering density from 10 to 0.1 microns. Improves water features that is already good. Microfiltration removes chlorine from water, microorganisms, sediment, rust, odor, color, taste, cloudiness, making it crystal clear, good to drink and for all alimentary purpose, food production, boiling broths, soups and pasta cooking ideal for all the family and is also available in 2-way version, with sparkling water. Microfiltration does not discard water and does not remove minerals leaving unaltered (TDS). The system operates in vertical or horizontal position depending by model selected, takes up very little space and can be placed under the sink. D.M. 25, D.M. 174 Certified. Ethos x natural products brochure
The document describes the ETHOS X microwave extraction system from Milestone for extracting essential oils and natural products from plants. It highlights that traditional extraction methods are outdated but the ETHOS X provides a solvent-free microwave approach that is faster, requires no solvents, avoids degradation, and produces high quality extracts in minutes compared to hours for other methods. The ETHOS X was developed in partnership with a university and has various patented extraction technologies. It is a versatile system available in different configurations for extracting fragrances or flavors.
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalogDepuratori Acqua Osmosi Inversa Addolcitori Sinergroup
Microfiltration is a filtration process that removes solid particles from water, by passing through filters with filtering density from 10 to 0.1 microns. Improves water features that is already good. Microfiltration removes chlorine from water, microorganisms, sediment, rust, odor, color, taste, cloudiness, making it crystal clear, good to drink and for all alimentary purpose, food production, boiling broths, soups and pasta cooking ideal for all the family and is also available in 2-way version, with sparkling water. Microfiltration does not discard water and does not remove minerals leaving unaltered (TDS). The system operates in vertical or horizontal position depending by model selected, takes up very little space and can be placed under the sink. D.M. 25, D.M. 174 Certified. Similar to Automated Tip-on-Tip Cannabis Filtration (20)
Innovative Products for Hotel Housekeeping & Commercial Laundries
Innovative Products for Hotel Housekeeping & Commercial Laundries
Fume Extraction Systems by Powertech Pollution Controls Private Limited Benga...
Fume Extraction Systems by Powertech Pollution Controls Private Limited Benga...
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Residential Microfiltration Ultrafiltration Water catalog
Recently uploaded
The cost of acquiring information by natural selection
This is a short talk that I gave at the Banff International Research Station workshop on Modeling and Theory in Population Biology. The idea is to try to understand how the burden of natural selection relates to the amount of information that selection puts into the genome.
It's based on the first part of this research paper:
The cost of information acquisition by natural selection
Ryan Seamus McGee, Olivia Kosterlitz, Artem Kaznatcheev, Benjamin Kerr, Carl T. Bergstrom
bioRxiv 2022.07.02.498577; doi: https://doi.org/10.1101/2022.07.02.498577
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Ozturkcan, S., Berndt, A., & Angelakis, A. (2024). Mending clothing to support sustainable fashion. Presented at the 31st Annual Conference by the Consortium for International Marketing Research (CIMaR), 10-13 Jun 2024, University of Gävle, Sweden.
Compositions of iron-meteorite parent bodies constrainthe structure of the pr...
Magmatic iron-meteorite parent bodies are the earliest planetesimals in the Solar System,and they preserve information about conditions and planet-forming processes in thesolar nebula. In this study, we include comprehensive elemental compositions andfractional-crystallization modeling for iron meteorites from the cores of five differenti-ated asteroids from the inner Solar System. Together with previous results of metalliccores from the outer Solar System, we conclude that asteroidal cores from the outerSolar System have smaller sizes, elevated siderophile-element abundances, and simplercrystallization processes than those from the inner Solar System. These differences arerelated to the formation locations of the parent asteroids because the solar protoplane-tary disk varied in redox conditions, elemental distributions, and dynamics at differentheliocentric distances. Using highly siderophile-element data from iron meteorites, wereconstruct the distribution of calcium-aluminum-rich inclusions (CAIs) across theprotoplanetary disk within the first million years of Solar-System history. CAIs, the firstsolids to condense in the Solar System, formed close to the Sun. They were, however,concentrated within the outer disk and depleted within the inner disk. Future modelsof the structure and evolution of the protoplanetary disk should account for this dis-tribution pattern of CAIs.
Signatures of wave erosion in Titan’s coasts
The shorelines of Titan’s hydrocarbon seas trace flooded erosional landforms such as river valleys; however, it isunclear whether coastal erosion has subsequently altered these shorelines. Spacecraft observations and theo-retical models suggest that wind may cause waves to form on Titan’s seas, potentially driving coastal erosion,but the observational evidence of waves is indirect, and the processes affecting shoreline evolution on Titanremain unknown. No widely accepted framework exists for using shoreline morphology to quantitatively dis-cern coastal erosion mechanisms, even on Earth, where the dominant mechanisms are known. We combinelandscape evolution models with measurements of shoreline shape on Earth to characterize how differentcoastal erosion mechanisms affect shoreline morphology. Applying this framework to Titan, we find that theshorelines of Titan’s seas are most consistent with flooded landscapes that subsequently have been eroded bywaves, rather than a uniform erosional process or no coastal erosion, particularly if wave growth saturates atfetch lengths of tens of kilometers.
TOPIC OF DISCUSSION: CENTRIFUGATION SLIDESHARE.pptx
Centrifugation is a powerful technique used in laboratories to separate components of a heterogeneous mixture based on their density. This process utilizes centrifugal force to rapidly spin samples, causing denser particles to migrate outward more quickly than lighter ones. As a result, distinct layers form within the sample tube, allowing for easy isolation and purification of target substances.
Mechanisms and Applications of Antiviral Neutralizing Antibodies - Creative B...
Neutralizing antibodies, pivotal in immune defense, specifically bind and inhibit viral pathogens, thereby playing a crucial role in protecting against and mitigating infectious diseases. In this slide, we will introduce what antibodies and neutralizing antibodies are, the production and regulation of neutralizing antibodies, their mechanisms of action, classification and applications, as well as the challenges they face.
Sustainable Land Management - Climate Smart Agriculture
Sustainable Land Management - Climate Smart AgricultureInternational Food Policy Research Institute- South Asia Office
PPT on Sustainable Land Management presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024.
Male reproduction physiology by Suyash Garg .pptx
Physiology of Male reproduction.
Video mentioned at page no. 23 as summary for better understanding
Discovery of An Apparent Red, High-Velocity Type Ia Supernova at 𝐳 = 2.9 wi...
We present the JWST discovery of SN 2023adsy, a transient object located in a host galaxy JADES-GS
+
53.13485
−
27.82088
with a host spectroscopic redshift of
2.903
±
0.007
. The transient was identified in deep James Webb Space Telescope (JWST)/NIRCam imaging from the JWST Advanced Deep Extragalactic Survey (JADES) program. Photometric and spectroscopic followup with NIRCam and NIRSpec, respectively, confirm the redshift and yield UV-NIR light-curve, NIR color, and spectroscopic information all consistent with a Type Ia classification. Despite its classification as a likely SN Ia, SN 2023adsy is both fairly red (
�
(
�
−
�
)
∼
0.9
) despite a host galaxy with low-extinction and has a high Ca II velocity (
19
,
000
±
2
,
000
km/s) compared to the general population of SNe Ia. While these characteristics are consistent with some Ca-rich SNe Ia, particularly SN 2016hnk, SN 2023adsy is intrinsically brighter than the low-
�
Ca-rich population. Although such an object is too red for any low-
�
cosmological sample, we apply a fiducial standardization approach to SN 2023adsy and find that the SN 2023adsy luminosity distance measurement is in excellent agreement (
≲
1
�
) with
Λ
CDM. Therefore unlike low-
�
Ca-rich SNe Ia, SN 2023adsy is standardizable and gives no indication that SN Ia standardized luminosities change significantly with redshift. A larger sample of distant SNe Ia is required to determine if SN Ia population characteristics at high-
�
truly diverge from their low-
�
counterparts, and to confirm that standardized luminosities nevertheless remain constant with redshift.
BIRDS DIVERSITY OF SOOTEA BISWANATH ASSAM.ppt.pptx
Ahota Beel, nestled in Sootea Biswanath Assam , is celebrated for its extraordinary diversity of bird species. This wetland sanctuary supports a myriad of avian residents and migrants alike. Visitors can admire the elegant flights of migratory species such as the Northern Pintail and Eurasian Wigeon, alongside resident birds including the Asian Openbill and Pheasant-tailed Jacana. With its tranquil scenery and varied habitats, Ahota Beel offers a perfect haven for birdwatchers to appreciate and study the vibrant birdlife that thrives in this natural refuge.
Injection: Risks and challenges - Injection of CO2 into geological rock forma...
Presentation by Dr. Florian Krob, Workshop "Risks of CO2 storage - How can they be addressed and reduced?", 22.4.2024
Direct Seeded Rice - Climate Smart Agriculture
Direct Seeded Rice - Climate Smart AgricultureInternational Food Policy Research Institute- South Asia Office
PPT on Direct Seeded Rice presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024.
Reaching the age of Adolescence- Class 8
This is a presentation on understanding the age of adolescence.
Recently uploaded (20)
Microbiology of Central Nervous System INFECTIONS.pdf
Microbiology of Central Nervous System INFECTIONS.pdf
The cost of acquiring information by natural selection
The cost of acquiring information by natural selection
Introduction_Ch_01_Biotech Biotechnology course .pptx
Introduction_Ch_01_Biotech Biotechnology course .pptx
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Compositions of iron-meteorite parent bodies constrainthe structure of the pr...
Compositions of iron-meteorite parent bodies constrainthe structure of the pr...
Juaristi, Jon. - El canon espanol. El legado de la cultura española a la civi...
Juaristi, Jon. - El canon espanol. El legado de la cultura española a la civi...
TOPIC OF DISCUSSION: CENTRIFUGATION SLIDESHARE.pptx
TOPIC OF DISCUSSION: CENTRIFUGATION SLIDESHARE.pptx
Mechanisms and Applications of Antiviral Neutralizing Antibodies - Creative B...
Mechanisms and Applications of Antiviral Neutralizing Antibodies - Creative B...
Sustainable Land Management - Climate Smart Agriculture
Sustainable Land Management - Climate Smart Agriculture
Discovery of An Apparent Red, High-Velocity Type Ia Supernova at 𝐳 = 2.9 wi...
Discovery of An Apparent Red, High-Velocity Type Ia Supernova at 𝐳 = 2.9 wi...
BIRDS DIVERSITY OF SOOTEA BISWANATH ASSAM.ppt.pptx
BIRDS DIVERSITY OF SOOTEA BISWANATH ASSAM.ppt.pptx
Injection: Risks and challenges - Injection of CO2 into geological rock forma...
Injection: Risks and challenges - Injection of CO2 into geological rock forma...
Automated Tip-on-Tip Cannabis Filtration
- 1. Edibles All sample types for Dried plant material Potency Pesticides Terpenes Mycotoxins Use ToT Filtration prior to downstream analysis for a variety of applications including: Process 1 - 96 samples at a time for all throughput needs. Use the top tip to aspirate your homogenized sample and dispense through a filtration tip. Replace tedious syringe filters. Tip-on-Tip (ToT) Filtration provides removal of course and fine particulates from cannabis samples after grinding and homogenization. Eliminate clogging and increase the life-time of chromatographic columns. Filtration tips are easy to integrate into an existing workflow using manual pipettors or automated liquid handlers. Products: Extracts and concentrates/oils INTip™ Filtration Cannabis Matrices Cannabis Matrix INTip Filtration Analysis Particulate removal 1µm Gasket provides air tight seal Low Porosity 1µm High efficiency sub-micron filtration for a variety of applications Dual Phase Two filters in a series provide maximum filtration without clogging for higher volume applications info@dpxlabs.com dpxtechnologies.com Contact us for more info on using INTip Filtration with your workflow.