This document summarizes the features and specifications of a depth cartridge filter. The filter is made of PET material, which allows it to be used for filtering liquids like water, oils, and acid solutions at temperatures up to 90°C. It has a novel gradient design that provides high filtration efficiency, high dirt holding capacity, and good contaminant retention along with low pressure drop. The filter media can be customized in terms of weight, width, diameter and other properties to meet user requirements.

1. Depth Cartridge Filter
TABLE 1 : MOC, Dimensions & Operating limits
www.ginnifilaments.com
filters are designed for removal of contaminants from Water and other liquids.
Due to its novel gradient design and high void volume, It has high filtration efficiency,
extremely high dirt holding capacity as well as good retention capability of the contaminants
along with low pressure drop.
As the Filter Media is of PET, so apart from Water, it has high suitability in the area of Petroleum
oil, edible oil and acid solution and in high temperature filtration. As there is no chemical inside,
so can be safely used in Pharma, Cosmetic, Biotechnology industry as well as in other industries.
be designed
Maximum ΔP 2 bar* at room temperature
Maximum 90˚C Operating temperature
Temperature
Max water 1000 Liter per hour per 10” length
flow rate and 2.5” OD*
Nominal 2µm, 5µm & 10µm
Micron
Rating
Fact Sheet

2. HYGIENE & REGULATION
• The filter is tested and passed for TOXICITY
(passes Bio Reactivity test as per USP <88>, CYTOTOXICITY
and Controlled Bioburden i.e. <1000 CFU/Gm)
• The Media is approved for Food contact act
GINNI FILAMENTS LIMITED
Office : H-6, Sector-63, NH-24, Noida-201307.
Ph.: 0120 4058400 Email- ginni@ginnifilaments.com
Factory : 205-207, Panoli GIDC, Ankleshwar, Gujarat – 394116
Depth Cartridge Filter
0
2
4
6
8
10
12
14
16
18
248.9
209.3
176
Par culate size in Micron
Micron size distribu on before
and a er Filtra on
Inlet
5 mic
Melt blown
Filter
%Channel
148
124.5
104.7
88
74
62.23
52.33
44
73
31.11
26.16
22
18.5
15.56
13.08
11
9.25
7.75
6.54
5.5
4.62
3.89
3.27
2.75
2.312
0
10
20
30
40
50
60
70
80
90
Melt Blown
Filter
Total Dust Hold
Gram
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
7.6 15.1 22.7 30.3
LPM
Delta P for various Flow rates
Ginni Flter
Market Filter
DeltaP
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1 3 4 5 6 7 8
Delta P across the days with
Flow rate 2KI / Hr
Ginni Filter
Market
Filter
DeltaP
Days
2
Ÿ Unique process that allows creating nonwoven fabrics with
random pores yet pore-size distribution is very even.
Unique three dimensional structures allow trapping of lots
of dirt & dust within its body.
Ÿ When using these filters, it is observed that it creates lesser
amount of pressure drop.
Ÿ These filters can withstand and filter the liquid flowing
o
with temperature up to 90 C with peak temperature of
o
120 C.
Ÿ Being 'Make in India' product developed indigenously, the
filters can be customized in terms of weight, width,
diameter based on users' requirement, thus optimizing the
product life cycle and reducing overall cost.
Ÿ Ownership cost of this filter is much less than available
filters in market. Please ask for customization. We shall be
happy to address your concern by achieving desired
efficiency in depth filters.
Ÿ Desired micron ratings of output liquid shall be achieved
after due analysis of source liquid.
Ÿ To serve diverse needs of different industries, we can
incorporate antimicrobial, antifungal, hydrophobic /
hydrophilic properties in the filter media.
FEATURES