(1) This document provides instructions for using a remote control surveillance device. (2) Key functions and components are described such as powering on/off, video and photo recording, sound recording, and resetting the device. (3) Tips are provided such as charging the battery when low, connecting to a computer to adjust the time stamps, and troubleshooting issues like unclear pictures or non-responsiveness.

1. equipment to obtain detailed safety ⑴Remote control receiving indicator learning has finished successfully.
User Manual instructions, do not connect to other device ⑵ Work indicator ⑶Power indicator
that the equipment not equipped with. ⑷Charging indicator ⑸Remote control Power On:long press⑹for two seconds or
Thank you for using our company's learning key ⑹ On/Off key press remote control ⒃ key once,yellow
products,please read the user manual Backup Important data of this equipment ⑺Remote control power On/Off light is on after flash twice, the device will
carefully before using this product. When please do a back up, any error operational ⑻M i i U S B
n ⑼Operation key automatic turn on and enters the standby
you start to use this equipment, we believe methods resulting in paper loss,the company ⑽Reset ⑾T F card slot mode.
that you have read the user manual shall not be responsible for. ⑿Remote control transmitting indicator
carefully. ⒀Remote control video recording key Video Recording:In standby Status,long
Host Interface： ⒁Remote control taking photo key press⑼ for two seconds or short press
Attentions： remote control ⒀ key once,green light is
Secure Startup: Avoid turning on ⒂Remote control sound recording key
⒃Remote control On/Off key on,at this time, the device has entered to
the equipment in the very dry or video mode. In video mode, short press⑼
humid environment, to prevent once or short press remote control ⒀ key
damaging of the equipment； Operation Instruction:
Note:The following operations are once,the green light is off, video files saved ,
Using qualified maintenance required to operate in standby mode and automatically the device automatic returns to
services:Only qualified ensure that the identified T-Flash card standby mode; if you want record more
maintenance personnel can repair was inserted to the card slot properly. videos,please repeat the above operation.
the equipment, Please do not Taking Photo:In standby status, short
dismantle the equipment by yourself Remote control learning:
Insert a samll needle into ⑸hold press press ⑼ key once or short press remote
Connect to other devices: When the machine and press the key,the blue control ⒁key once,green light is off after
connect to other equipments, light is on,press any key of the remote flash once, meas that photo shooting is
please read the user manual of the control, the blue light flashes once then completed and has been automatic return
off,it means that the remote control to the standby mode,if you want take more
photos,please repeat above operation.

2. Sound Recording:In standby status, short Time watermarks:Video files with time of the host is low,please charge the battery do the next step.the particular operation
press remote control⒂key once, green light watermarks. it can be modified, we did not adjust in time. in the course of charging,if the red is written in the manual.
and yellow light are on at the same time. the time of equipments when it comes from light is on constantly, it means it is charging. Q: Why the time watermark is not accurate
means that the device has entered to sound factory, if you found it is not accurate , it's easy to When red light is off,it means the enough after updating the system time?
recording mode. short press again remote adjust by yourself, just use the USB cable and recharging finished. please pull out the A: Because the battery support the working
control ⒂ key once,green light is off, sound connect the equipment to the computer, After the machine from computer in time, to prevent of system time. Please do not exhaust the
recording files saved automatically,and the computer dispay that found the movable batteries being damaged. This device battery and charge the battery in time, or
device automatic returns to standby mode; if disk(muse be insert identifiable TF card), run the support plug-in work,to prevent power off in keep the battery full and adjust the time
you want record more sounds,please repeat CD-ROM, and double clik the file "Time.bat" to long time working process,please insert before you use it.
the above operation. run, then the equipment automatic change the USB power supply into USB port of this Q: Why I can not find the mobile hard disk
time to the display-time of computer. After device. after the equipment is connected to the
Power Off: In power on Status,short that,pull out equipment from computer, then Reset:If the device crashed due to computer?
press⑹once or short press remote restart and power off once. The modification of improper operation,please insert a A: Please confirm your computer’s
control⒃key once, all the lights are off, time is finished. needle-like objects into the ⑽and lightly operating system. It can identify and install
means that equipment has been power off. press it once,then restart the device after the correspond drivers
PC Camera:Press⑹key and insert the computer reset automatically in WINDOWS98SE/ME
Remote Control PoweOn/Off:Move⑺t o USB, then enter the PC Camera Mode. /2000/X P/MAS OS/LINUX. WINDOWS 98
left ON position,means that the remote Note:When insert the external USB power system need to install drivers which is
control power on,can receive remote control Removable disk:if you need to connect the supply to the device,please don’t manually recorded in the CD-ROM
operation. Move⑺t ri OFF
o ght computer as a removable disk,please connect shut down and perform the “Reset” action. Q: Why the picture is not so clear?
position,means that the remote control the computer after power on,it can not identify A:The equipment does not possess the
power off,at this time,it can not remote correctly if you connect the computer aftter FAQ: function of preventing free of shaking,
control the host.if use this device for a long power off. Q:Why it does not have any response Please keep your hands and the object do
time,please move ⑺ t O F F position to
o after pressing the ①continuously. not shake.
avoid the battery being exhausted. Charging:In the course of using, if yellow light A:Because all operation needs going
flashes constantly, means that the power volume back to the standby mode, then we can