Assignment_DSM_II.docx
•Download as DOCX, PDF•
0 likes•5 views
This document contains an assignment given to students with 17 questions covering various digital logic design topics. The questions cover converters between BCD and excess-3 code and BCD and gray code using K-maps, magnitude comparators, encoders and decoders, 7-segment displays, multiplexers, demultiplexers, adders including look ahead carry and BCD adders, shift registers, counters including asynchronous and Johnson counters, and sequential circuits. The assignment was prepared by Prashant Kumar and verified by the head of department.
Report
Share
Report
Share
Recommended
Implementation of High Speed Low Power 16 Bit BCD Multiplier Using Excess-3 C...
The paper mainly concentrates on the development of the new architecture for BCD parallel multiplier that
exploits some properties of two different redundant BCD codes to speed up its computation: the redundant
BCD excess-3 code (XS-3), and the overloaded BCD representation (ODDS). In this we have developed a 16
bit BCD multiplier using some new techniques to reduce significantly the latency and area of previous
representative high-performance implementations. The key role plays by the Partial product generation in
parallel using a signed-digit radix-10 recoding of the BCD multiplier with the digit set [-5, 5], and a set of
positive multiplicand multiples (1X, 2X, 3X, 4X, 5X) coded in XS-3.By using the above approach of encoding
there are several advantages like mainly it is a self-complementing code, so that a negative multiplicand
multiple can be obtained by just inverting the bits of the corresponding positive one. Also, the available
redundancy allows a fast and simple generation of multiplicand multiples in a carry-free way and finally, the
partial products can be recoded to the ODDS representation by just adding a constant factor into the partial
product reduction tree. Since the ODDS uses a similar 4-bit binary encoding as non-redundant BCD,
conventional binary VLSI circuit techniques. We had developed a new approach of BCD addition for the final
stage. The above developed architecture of 4X4 has been synthesized a RTL model and given better
performance compared to old version multipliers.
IC Layout Design of 4-bit Magnitude Comparator using Electric VLSI Design System
There is need to develop various new design techniques in order to fulfil the demand of increased speed, reduced area for compactness and reduced power consumption. It is considered that improved other performance specifications such as less delay, high noise immunity and suitable ambient temperature conditions are the prime factors. In this paper two different techniques are used for designing a 4-bit Magnitude Comparator(MC) and then a comparison is made about area and average delay. First one is Transmission Gate (TG) technique and second one is GDI Technique. This paper describes the design of an Integrated Circuit (IC) layout for a 4-bit MC. The layout was designed by use of an open source software namely Electric VLSI Design System which is Electronic Design Automation (EDA) tool. LTspiceXVII is used as simulator to carry out the simulation work.
Design and Implementation of Different types of Carry skip adder
https://www.irjet.net/archives/V9/i12/IRJET-V9I12180.pdf
Designing of Adders and Vedic Multiplier using Gate Diffusion Input
https://irjet.net/archives/V4/i9/IRJET-V4I999.pdf
High Performance FPGA Based Decimal-to-Binary Conversion Schemes
Here we represent high performance FPGA based decimal to binary conversion scheme to support BCD arithmetic based on binary hardware .The architecture presented here requires less LUTs as compare to others and delay is also reduced by the help of shifters in place of multipliers.
For more info visit us at:
http://www.siliconmentor.com/
Design and Implementation of DMC for Memory Reliability Enhancement
https://irjet.net/archives/V4/i8/IRJET-V4I8337.pdf
Recommended
Implementation of High Speed Low Power 16 Bit BCD Multiplier Using Excess-3 C...
The paper mainly concentrates on the development of the new architecture for BCD parallel multiplier that
exploits some properties of two different redundant BCD codes to speed up its computation: the redundant
BCD excess-3 code (XS-3), and the overloaded BCD representation (ODDS). In this we have developed a 16
bit BCD multiplier using some new techniques to reduce significantly the latency and area of previous
representative high-performance implementations. The key role plays by the Partial product generation in
parallel using a signed-digit radix-10 recoding of the BCD multiplier with the digit set [-5, 5], and a set of
positive multiplicand multiples (1X, 2X, 3X, 4X, 5X) coded in XS-3.By using the above approach of encoding
there are several advantages like mainly it is a self-complementing code, so that a negative multiplicand
multiple can be obtained by just inverting the bits of the corresponding positive one. Also, the available
redundancy allows a fast and simple generation of multiplicand multiples in a carry-free way and finally, the
partial products can be recoded to the ODDS representation by just adding a constant factor into the partial
product reduction tree. Since the ODDS uses a similar 4-bit binary encoding as non-redundant BCD,
conventional binary VLSI circuit techniques. We had developed a new approach of BCD addition for the final
stage. The above developed architecture of 4X4 has been synthesized a RTL model and given better
performance compared to old version multipliers.
IC Layout Design of 4-bit Magnitude Comparator using Electric VLSI Design System
There is need to develop various new design techniques in order to fulfil the demand of increased speed, reduced area for compactness and reduced power consumption. It is considered that improved other performance specifications such as less delay, high noise immunity and suitable ambient temperature conditions are the prime factors. In this paper two different techniques are used for designing a 4-bit Magnitude Comparator(MC) and then a comparison is made about area and average delay. First one is Transmission Gate (TG) technique and second one is GDI Technique. This paper describes the design of an Integrated Circuit (IC) layout for a 4-bit MC. The layout was designed by use of an open source software namely Electric VLSI Design System which is Electronic Design Automation (EDA) tool. LTspiceXVII is used as simulator to carry out the simulation work.
Design and Implementation of Different types of Carry skip adder
https://www.irjet.net/archives/V9/i12/IRJET-V9I12180.pdf
Designing of Adders and Vedic Multiplier using Gate Diffusion Input
https://irjet.net/archives/V4/i9/IRJET-V4I999.pdf
High Performance FPGA Based Decimal-to-Binary Conversion Schemes
Here we represent high performance FPGA based decimal to binary conversion scheme to support BCD arithmetic based on binary hardware .The architecture presented here requires less LUTs as compare to others and delay is also reduced by the help of shifters in place of multipliers.
For more info visit us at:
http://www.siliconmentor.com/
Design and Implementation of DMC for Memory Reliability Enhancement
https://irjet.net/archives/V4/i8/IRJET-V4I8337.pdf
Project report on design & implementation of high speed carry select adder
Project report on design & implementation of high speed carry select adder
M367578
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Comparative study of single precision floating point division using differen...
Comparative study of single precision floating point division using differen...International Journal of Reconfigurable and Embedded Systems
This paper presents different computational algorithms to implement single
precision floating point division on field programmable gate arrays (FPGA).
Fast division computation algorithms can apply to all division cases by
which an efficient result will be obtained in terms of delay time and power
consumption. 24-bit Vedic multiplication (Urdhva-Triyakbhyam-sutra)
technique enhances the computational speed of the mantissa module and this
module is used to design a 32-bit floating point multiplier which is the
crucial feature of this proposed design, which yields a higher computational
speed and reduced delay time. The proposed design of floating-point divider
using fast computational algorithms synthesized using Verilog hardware
description language has a 32-bit floating point multiplier module unit and a
32-bit floating point subtractor module unit. Xilinx Spartan 6 SP605
evaluation platform is used to verify this proposed design on FPGA.
Synthesis results provide the device utilization and propagation delay
parameters for the proposed design and a comparative study is done with
previous work. Input to the divider is provided in IEEE 754 32-bit formats.J43015355
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Design of high speed area optimized binary coded
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
A High performance unified BCD adder/Subtractor
Improved architecture for efficient Binary Coded Decimal (BCD) addition/subtraction is presented that performs binary
addition/subtraction without any extra hardware
FPGA based JPEG Encoder
Compression is playing a vital role in data transfer. Hence, Digital camera uses JPEG standard to compress the captured image. Hence, it reduces data storage requirements. Here, we proposed FPGA based JPEG encoder. The processing system is coupled with DCT and then it is quantized and then it is prepared for entropy coding to form a JPEG encoder
DUAL FIELD DUAL CORE SECURE CRYPTOPROCESSOR ON FPGA PLATFORM
This paper is devoted to the design of dual core crypto processor for executing both Prime field and binary field instructions. The proposed design is specifically optimized for Field programmable gate array (FPGA) platform. Combination of two different field (prime field GF(p) and Binary field GF(2m)) instructions execution is analysed.The design is implemented in Spartan 3E and virtex5. Both the performance results are compared. The implementation result shows the execution of parallelism using dual field instructions
An Optimal Design of UP-DOWN Counter as SAR Logic Based ADC using CMOS 45nm T...
In this paper an analog to digital converter architecture is introduced. The proposed design is based on Up-Down counter approach SAR type ADC. This design offers less design complexity which leads to low power consumption. Based on the proposed idea, a 4-bit ADC is simulated in Microwind 3.5 environment using 45nm CMOS technology with supply voltage of 1 V. The ADC is designed with control signal like Start of conversion (SOC) and End of conversion (EOC). The ADC design consumes 3.2mW of power. The proposed ADC design is optimized to area of 829.6µm2.
A Novel Efficient VLSI Architecture for IEEE 754 Floating point multiplier us...
Due to advancement of new technology in the field of VLSI and Embedded system, there is an increasing
demand of high speed and low power consumption processor. Speed of processor greatly depends on its
multiplier as well as adder performance. In spite of complexity involved in floating point arithmetic, its
implementation is increasing day by day. Due to which high speed adder architecture become important. Several
adder architecture designs have been developed to increase the efficiency of the adder. In this paper, we
introduce an architecture that performs high speed IEEE 754 floating point multiplier using modified carry
select adder (CSA). Modified CSA depend on booth encoder (BEC) Technique. Booth encoder, Mathematics is
an ancient Indian system of Mathematics. Here we are introduced two carry select based design. These designs
are implementation Xilinx Vertex device family.
H0534248
IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) is an open access international journal that provides rapid publication (within a month) of articles in all areas of electronics and communication engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in electronics and communication engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Reconfigurable CORDIC Low-Power Implementation of Complex Signal Processing f...
In recent years, CORDIC algorithms has been used extensively for various image processing
system& biomedical applications. By using CORDIC algorithm we can able to reducing the number of
iteration to process the image in the system. Low power design is to be challenging process during system
operations. Previous approaches scope to minimize the power consumption without image quality
consideration. In this paper CORDIC Based Low Power DCT iterations process equally based upon their
image quality. An hardware implementation of ROM & control logic circuit to require large hardware
space in this system. Look-ahead CORDIC Approach is used to finish the iteration at one time. When
reducing hardware area & reducing number of iterations for maximize battery lifetime. This idea used to
achieve the low power design of image and video compression application
A 12-Bit High Speed Analog To Digital Convertor Using μp 8085
The need constantly exists for converters with higher resolution, faster conversion speeds and lower power dissipation. High-speed analog to digital converters (ADC’s) have been based on flash architecture, because all comparators sample the analog input voltage simultaneously, this ADC is thus inherently fast. Unfortunately, flash ADC requires 2N - 1 comparators to convert N bit digital code from an analog sample. This makes flash ADC’s unsuitable for high-resolution applications. This paper demonstrates a simple technique to enhance resolution of flash ADC’s that require as few as 256 comparators for 12-bit conversion. In this approach, the analog input range is partitioned into 256 quantization cells, separated by 255 boundary points. An 8-bit binary code 00000000 to 11111111 is assigned to each cell. A 12-bit flash converter requires 4096 comparators, while proposed technique reduces number of comparator requirements to only 256 for 12- bit conversion. Therefore, this technique is best suitable when high speed combined with high resolution is required. Result of 12-bit prototype is presented.
EFFICIENT ABSOLUTE DIFFERENCE CIRCUIT FOR SAD COMPUTATION ON FPGA
Video Compression is very essential to meet the technological demands such as low power, less memory
and fast transfer rate for different range of devices and for various multimedia applications. Video
compression is primarily achieved by Motion Estimation (ME) process in any video encoder which
contributes to significant compression gain.Sum of Absolute Difference (SAD) is used as distortion metric
in ME process.In this paper, efficient Absolute Difference(AD)circuit is proposed which uses Brent Kung
Adder(BKA) and a comparator based on modified 1’s complement principle and conditional sum adder
scheme. Results shows that proposed architecture reduces delay by 15% and number of slice LUTs by 42
% as compared to conventional architecture. Simulation and synthesis are done on Xilinx ISE 14.2 using
Virtex 7 FPGA.
More Related Content
Similar to Assignment_DSM_II.docx
Project report on design & implementation of high speed carry select adder
Project report on design & implementation of high speed carry select adder
M367578
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Comparative study of single precision floating point division using differen...
Comparative study of single precision floating point division using differen...International Journal of Reconfigurable and Embedded Systems
This paper presents different computational algorithms to implement single
precision floating point division on field programmable gate arrays (FPGA).
Fast division computation algorithms can apply to all division cases by
which an efficient result will be obtained in terms of delay time and power
consumption. 24-bit Vedic multiplication (Urdhva-Triyakbhyam-sutra)
technique enhances the computational speed of the mantissa module and this
module is used to design a 32-bit floating point multiplier which is the
crucial feature of this proposed design, which yields a higher computational
speed and reduced delay time. The proposed design of floating-point divider
using fast computational algorithms synthesized using Verilog hardware
description language has a 32-bit floating point multiplier module unit and a
32-bit floating point subtractor module unit. Xilinx Spartan 6 SP605
evaluation platform is used to verify this proposed design on FPGA.
Synthesis results provide the device utilization and propagation delay
parameters for the proposed design and a comparative study is done with
previous work. Input to the divider is provided in IEEE 754 32-bit formats.J43015355
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Design of high speed area optimized binary coded
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
A High performance unified BCD adder/Subtractor
Improved architecture for efficient Binary Coded Decimal (BCD) addition/subtraction is presented that performs binary
addition/subtraction without any extra hardware
FPGA based JPEG Encoder
Compression is playing a vital role in data transfer. Hence, Digital camera uses JPEG standard to compress the captured image. Hence, it reduces data storage requirements. Here, we proposed FPGA based JPEG encoder. The processing system is coupled with DCT and then it is quantized and then it is prepared for entropy coding to form a JPEG encoder
DUAL FIELD DUAL CORE SECURE CRYPTOPROCESSOR ON FPGA PLATFORM
This paper is devoted to the design of dual core crypto processor for executing both Prime field and binary field instructions. The proposed design is specifically optimized for Field programmable gate array (FPGA) platform. Combination of two different field (prime field GF(p) and Binary field GF(2m)) instructions execution is analysed.The design is implemented in Spartan 3E and virtex5. Both the performance results are compared. The implementation result shows the execution of parallelism using dual field instructions
An Optimal Design of UP-DOWN Counter as SAR Logic Based ADC using CMOS 45nm T...
In this paper an analog to digital converter architecture is introduced. The proposed design is based on Up-Down counter approach SAR type ADC. This design offers less design complexity which leads to low power consumption. Based on the proposed idea, a 4-bit ADC is simulated in Microwind 3.5 environment using 45nm CMOS technology with supply voltage of 1 V. The ADC is designed with control signal like Start of conversion (SOC) and End of conversion (EOC). The ADC design consumes 3.2mW of power. The proposed ADC design is optimized to area of 829.6µm2.
A Novel Efficient VLSI Architecture for IEEE 754 Floating point multiplier us...
Due to advancement of new technology in the field of VLSI and Embedded system, there is an increasing
demand of high speed and low power consumption processor. Speed of processor greatly depends on its
multiplier as well as adder performance. In spite of complexity involved in floating point arithmetic, its
implementation is increasing day by day. Due to which high speed adder architecture become important. Several
adder architecture designs have been developed to increase the efficiency of the adder. In this paper, we
introduce an architecture that performs high speed IEEE 754 floating point multiplier using modified carry
select adder (CSA). Modified CSA depend on booth encoder (BEC) Technique. Booth encoder, Mathematics is
an ancient Indian system of Mathematics. Here we are introduced two carry select based design. These designs
are implementation Xilinx Vertex device family.
H0534248
IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) is an open access international journal that provides rapid publication (within a month) of articles in all areas of electronics and communication engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in electronics and communication engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Reconfigurable CORDIC Low-Power Implementation of Complex Signal Processing f...
In recent years, CORDIC algorithms has been used extensively for various image processing
system& biomedical applications. By using CORDIC algorithm we can able to reducing the number of
iteration to process the image in the system. Low power design is to be challenging process during system
operations. Previous approaches scope to minimize the power consumption without image quality
consideration. In this paper CORDIC Based Low Power DCT iterations process equally based upon their
image quality. An hardware implementation of ROM & control logic circuit to require large hardware
space in this system. Look-ahead CORDIC Approach is used to finish the iteration at one time. When
reducing hardware area & reducing number of iterations for maximize battery lifetime. This idea used to
achieve the low power design of image and video compression application
A 12-Bit High Speed Analog To Digital Convertor Using μp 8085
The need constantly exists for converters with higher resolution, faster conversion speeds and lower power dissipation. High-speed analog to digital converters (ADC’s) have been based on flash architecture, because all comparators sample the analog input voltage simultaneously, this ADC is thus inherently fast. Unfortunately, flash ADC requires 2N - 1 comparators to convert N bit digital code from an analog sample. This makes flash ADC’s unsuitable for high-resolution applications. This paper demonstrates a simple technique to enhance resolution of flash ADC’s that require as few as 256 comparators for 12-bit conversion. In this approach, the analog input range is partitioned into 256 quantization cells, separated by 255 boundary points. An 8-bit binary code 00000000 to 11111111 is assigned to each cell. A 12-bit flash converter requires 4096 comparators, while proposed technique reduces number of comparator requirements to only 256 for 12- bit conversion. Therefore, this technique is best suitable when high speed combined with high resolution is required. Result of 12-bit prototype is presented.
EFFICIENT ABSOLUTE DIFFERENCE CIRCUIT FOR SAD COMPUTATION ON FPGA
Video Compression is very essential to meet the technological demands such as low power, less memory
and fast transfer rate for different range of devices and for various multimedia applications. Video
compression is primarily achieved by Motion Estimation (ME) process in any video encoder which
contributes to significant compression gain.Sum of Absolute Difference (SAD) is used as distortion metric
in ME process.In this paper, efficient Absolute Difference(AD)circuit is proposed which uses Brent Kung
Adder(BKA) and a comparator based on modified 1’s complement principle and conditional sum adder
scheme. Results shows that proposed architecture reduces delay by 15% and number of slice LUTs by 42
% as compared to conventional architecture. Simulation and synthesis are done on Xilinx ISE 14.2 using
Virtex 7 FPGA.
Similar to Assignment_DSM_II.docx (20)
Project report on design & implementation of high speed carry select adder
Project report on design & implementation of high speed carry select adder
Comparative study of single precision floating point division using differen...
Comparative study of single precision floating point division using differen...
DUAL FIELD DUAL CORE SECURE CRYPTOPROCESSOR ON FPGA PLATFORM
DUAL FIELD DUAL CORE SECURE CRYPTOPROCESSOR ON FPGA PLATFORM
An Optimal Design of UP-DOWN Counter as SAR Logic Based ADC using CMOS 45nm T...
An Optimal Design of UP-DOWN Counter as SAR Logic Based ADC using CMOS 45nm T...
A Novel Efficient VLSI Architecture for IEEE 754 Floating point multiplier us...
A Novel Efficient VLSI Architecture for IEEE 754 Floating point multiplier us...
Reconfigurable CORDIC Low-Power Implementation of Complex Signal Processing f...
Reconfigurable CORDIC Low-Power Implementation of Complex Signal Processing f...
A 12-Bit High Speed Analog To Digital Convertor Using μp 8085
A 12-Bit High Speed Analog To Digital Convertor Using μp 8085
EFFICIENT ABSOLUTE DIFFERENCE CIRCUIT FOR SAD COMPUTATION ON FPGA
EFFICIENT ABSOLUTE DIFFERENCE CIRCUIT FOR SAD COMPUTATION ON FPGA
Recently uploaded
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
学校原件一模一样【微信：741003700 】《(ANU毕业证书)澳洲国立大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Online aptitude test management system project report.pdf
The purpose of on-line aptitude test system is to take online test in an efficient manner and no time wasting for checking the paper. The main objective of on-line aptitude test system is to efficiently evaluate the candidate thoroughly through a fully automated system that not only saves lot of time but also gives fast results. For students they give papers according to their convenience and time and there is no need of using extra thing like paper, pen etc. This can be used in educational institutions as well as in corporate world. Can be used anywhere any time as it is a web based application (user Location doesn’t matter). No restriction that examiner has to be present when the candidate takes the test.
Every time when lecturers/professors need to conduct examinations they have to sit down think about the questions and then create a whole new set of questions for each and every exam. In some cases the professor may want to give an open book online exam that is the student can take the exam any time anywhere, but the student might have to answer the questions in a limited time period. The professor may want to change the sequence of questions for every student. The problem that a student has is whenever a date for the exam is declared the student has to take it and there is no way he can take it at some other time. This project will create an interface for the examiner to create and store questions in a repository. It will also create an interface for the student to take examinations at his convenience and the questions and/or exams may be timed. Thereby creating an application which can be used by examiners and examinee’s simultaneously.
Examination System is very useful for Teachers/Professors. As in the teaching profession, you are responsible for writing question papers. In the conventional method, you write the question paper on paper, keep question papers separate from answers and all this information you have to keep in a locker to avoid unauthorized access. Using the Examination System you can create a question paper and everything will be written to a single exam file in encrypted format. You can set the General and Administrator password to avoid unauthorized access to your question paper. Every time you start the examination, the program shuffles all the questions and selects them randomly from the database, which reduces the chances of memorizing the questions.
Water billing management system project report.pdf
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
Building Electrical System Design & Installation
Guide for Building Electrical System Design & Installation
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
Governing Equations for Fundamental Aerodynamics
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.
Thank me later.
samsarthak31@gmail.com
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Recently uploaded (20)
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
DESIGN AND ANALYSIS OF A CAR SHOWROOM USING E TABS
DESIGN AND ANALYSIS OF A CAR SHOWROOM USING E TABS
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Online aptitude test management system project report.pdf
Online aptitude test management system project report.pdf
Fundamentals of Electric Drives and its applications.pptx
Fundamentals of Electric Drives and its applications.pptx
Water billing management system project report.pdf
Water billing management system project report.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
Assignment_DSM_II.docx
- 1. ASHOKRAO MANE GROUP OF INSTITUTIONS, VATHAR. FORMAT Doc. No.: AMGOI-ACAD-FRM-27 Rev. No.: 00 PAGE 1 of 1 Rev. Dt: 05/01/2013 Assignment No. 2 Sub : DSM Date: 03.03.2014 1. Design BCD to Excess-3 code Converter with K-map. 2. Design BCD to Gray Code Converter with K-map. 3. What is Comparator and design 5-bit Magnitude Comparator. 4. What is Encoder and Decoder. Also Design Decimal to BCD Encoder and Decoder. 5. Explain BCD-to-Seven segment Decoder Configuration. 6. Implement the following logic function using an 8:1 MUX F(A,B,C,D) = ∑m(1,3,4,11,12,13,14,15) 7. Design of a 16:1 MUX using 4:1 MUX Modules. 8. What is demultiplexer and why it is called a distributor. 9. With neat schematic explain 4 bit adder with look ahead carry. 10. With neat schematic explain the working of shift register and its types. 11. Explain Universal Shift Register with neat diagram. 12. Differentiate between asynchronous and synchronous sequential circuits. 13. What is counter? Draw and explain 3 bit up asynchronous counter. 14. Design BCD adder? 15. What is counter and its application. 16. What is ring counter? Explain Johnson counter. 17. Determine the number of FFs Required for the following: a) mod- 3 b) mod-8 c) mod-14 d) mod-32 e) mod-150 Prepared By Verified By Prashant kumar H.O.D