Mohammad Nafisul Haque has over 12 years of experience in quality control and inspection roles in the oil, gas, and petrochemical industries. He is applying for a QC Manager position. His experience includes inspection of welding, piping, materials, coatings, and other aspects of construction and installation. He has worked on large projects for companies like Saudi Aramco and ONGC in Saudi Arabia and India.

1. .
Mohammad Nafisul Haque
Email: nafis.mallick@gmail.com
MOBILE No. +966577652352 | +919570387224
Subject: Application for the Post of QC Manager
PROFILE SUMMARY:
Professional Engineering in Mechanical Engineer with Noteworthy experience in Construction, Maintenance,
Start-up, Shutdown and Annual Turnaround Activities in the Oil/Gas and Petrochemical industries. Around 12
years of extensive work experience in various engineering inspection practice with proven leadership
capabilities and staff supervision, in a QC Department for Execution of work inspection / witness and testing of
Calibration | Hydro Test | Leak Test | Pneumatic Test, and Various type of Inspection.
 Welding, Structure, Piping, Pipeline Operations and Quality Control & Assurance Inspection &
Documentation.
 Extensive knowledge of the Welding Process, Non Destructive Testing, Distortion Control, Repair Rejection
Rate Control, Cost Reduction and other Quality Controls.
 Inspection in various welding process included GTAW, SMAW, FCAW and SAW, Material Welded Inconel,
Carbon Steel, Austenitic SS, ferritic SS, Clad material and Alloy Steel.
ORGANIZATIONAL EXPERIENCE
1. DAEAH Engineering & Construction Co. Ltd. , Saudi Arabia , UO1 Petro Rabigh Project ,Phase-II
Saudi Aramco Approved Site QC Manager Since 22nd December 2014 – Till date for Rabigh II SMP-4
Interconnecting Package.
Responsibilities:
 Participating in the kick off and weekly project progress meeting.
 Conducting QA/QC weekly Meeting with the contractor and PID to resolve the issues/concerns
related with quality.
 Conducting internal meeting with QA/QC Engineers & Discipline inspectors on daily basis and follow-
up daily site activities.
 Coordinate with the client items related to quality
 Verification of all documents related with inspection activities as per approved ITP.
 Maintaining all safety aspects both at site and offices as per company HSE policy thru HSE
representative.
 Interview / review prospective personnel
 Resolving of all quality related issues whenever it arises.
 Performing both internal and external audit at planned schedule.
 Follow-up the NCR and LBE until it will be rectified and closed.
 Attending some inspections in case of emergency.
 Review all the hydro test packages.
 Develop the QA/QC procedure & report format for some critical activities.
 To take care about all activities related with QA/QC.
 A Little experience of handling and closing of projects in oil & gas and petrochemical industry.
 Handling and closing of the projects as per Owner Specification and International Code.
 Review of QC dossier when the project will be completed and hand over to the clients.
2. DODSAL Engineering & Construction Pte. Ltd.| SGD-2 & 3 Project | Hameem, UAE
QC Piping Inspector Since 6th October 2012 – Till 19th June 2014 for Shah Gas Development Project
(SGD-2 & 3). (1 year 8 Months)
RESPONSIBILITIES:
 Inspection of Incoming Material as per Test Certificate and traceability records.
 Reviewing the Documents such as WPS/PQR, Welding consumable Control procedure and Vendor
documents of Metering skid according to specification.
 Inspection of piping spool before welding, fit-up inspection of joints e.g. root gap, root face, bevel angle
and checking the Pre-heat temperature to avoid hydrogen cracking as per approved WPS.
 Inter Pass temperature and post weld heat temperature (PWHT) inspection during and after welding of
alloy Steel Material like P11 and P22 materials.
 Carried out structural inspection on panel, sub-assembly, assembly, block erection stages.
 Fit up and welding inspection of structural, Inconel and clad material piping as per approved drawing
and related WPS.

2.  During welding checking Welding Parameters like polarity, current, voltage, position & direction of
welding as per approved WPS.
 Final dimension and weld visual inspection of piping and structural joints as per Section IX and ASME
B31.3 requirements.
 Proper Inspection of Pre-heating and PWHT of Alloy Steel Material (P11 & P22) and LTCS Material.
 Monitoring WQT of welders as per Section IX.
 Monitoring Welders for Correct usages of WPS & effective as well as cost control welding technique.
 Monitoring Weld Repairs and Resolving as per procedure.
 Reviewing NDT and RT Films as per ASME Section V.
 Witnessing and monitoring pressure tests, PWHT and interpret relevant charts.
 Handling DWR of daily progress of Welding and fit-up joints of piping.
 Witness of Hydro-testing of Piping fabricated spool.
 Site Erection as per approved drawing with proper line direction of spools and structure.
 Preparation and clearance of test pack as per line.
 Boiler and stem drum piping fit-up as well as welding inspection on site.
 Punch listing for walk down and reinstatement of test packs.
 Witness of bolt torque and tensioning as per approved flange management system (FMS).
 Ensuring that accurate, concise records of approved Procedures are maintained.
 Inspection and verification of various raw materials and applicable consumables are as per ITP.
 Co-ordinate with client project inspection unit for necessary project inspection for witnessing point and
hold point.
 Confirm repairs, re-testing and re-inspection in accordance with specifications.
 Monitoring piping fabrication work, fit-up welding and erection and co-ordinate to sub-contractor to
assure that construction activities effecting safety and quality are compliance with project
requirements.
 Prepare punch list for completed line and review test packages prior for hydro test.
 Witness of Hydro testing, pneumatic testing ; Air blowing ; flushing; with owner representative.
 Conducted Surveillance on all Mechanical Inspection related issues and coordination with the Project
Inspection Dept.
 Reviewing final package for hydro test approval and releasing for test.
 Checking the punch listing item as per P & ID and Isometric, such as pipe support, valves, guides, and
NDT completion.
 Final reinstatement and verification inspection, Piping of walkthrough, final mechanical completion and
inspection
3. Velosi Certification Services (I) Pvt. Ltd.| Mumbai
Inspection Engineer (TPI) 12th
January 2010 – 30th
August 2012 For ONGC (Oil & Natural Gas
Corporation) Assam Renewal Project.(470Km Pipeline and GGS Piping)) ( 2 years 7 Months)
RESPONSIBILITIES:
 Supervising EPC contractor and subcontractors, on behalf of the ONGC, to carry out inspection/ ensure
compliance with project specific QA/QC requirements such as Inspection Procedures/Checklists/ITPs
etc.
 Construction progress monitoring of all phase of work performed by EPC Contractor (civil, structural,
tank, Equipment and piping mainly) in the gas compressors & export metering areas issuing daily /
weekly reports for the company management.
 Review and comments of method statements , ITP, Test packs, inspection of items from this documents
requiring client attendance
 Verification of contractor check-list from test packs and witnessing the pressure tests of (above/
underground) piping system installed
 Verification on site the physical progress of work, the quality required level, safety condition
 Verifying contractor's check list for pressure test, mechanical completion / pre-commissioning stages.
 Review Sub-Contractor Piping and structural WPS, WQT, NDE, Procedure as per requirement.
 Carried out structural inspection on panel, sub-assembly, assembly, block erection stages.
 Certifying welding procedure specification (WPS) and welder’s qualification test (WQT) of contractor.
 Monitoring all welding, Painting, QA/QC inspection of contractors & ensuring that all codes, standards
and specification requirements are strictly adhere during execution & final signing off on reports.
 Inspection of IMIR for equipment’s, valves & fitting, pipe instruments, plates and others as per test
certificates & IRC.
 Verification of all QC related activities in Piping/Pipeline , Equipment(Static & Rotating, Tanks, Painting,
Fireproofing & Insulation
 Witness of hydro test as per client’s specification.
 Surveillance of stringing and welding of pipes.
 Final dimension and weld visual inspection of pipes as per API 5L and section IX requirements.
 Surveillance of fit-up inspection for proper root gap, groove angle, root face and pre-heat temperature
to avoid hydrogen cracking.

3.  Surveillance During welding of polarity, current, Voltage, position & direction of welding as per
approved WPS.
 To co-ordinate with client to undertake procedure qualification test (PQT) and inspection of prepared
test specimens and witness destructive tests.
 Inspection of coating material as per approved specification.
 During coating inspection of DFT and temperature as per approved procedure.
 Witnessing peel test of sleeve as per available Temperatures records.
 Pipe-book verification as per welding, RT, and coating reports.
 During lowering of pipe inspection of trench width & depth, Pipeline sequence as per approved line
sequence sheet.
 Witness of holiday detection test as per approved required voltage (25kv).
 Hold point inspection of drain & vent casing pipe thickness, carrier pipe, insulator fitting as per
dimension for Nala, River and road crossing area as well as restoration & drain of ROU.
 Inspection of crude oil & effluent tank as per approved code.
 Hold point inspection of Construction of new Storage tank as per API 650 Codes.
 Inspection related to tank e.g. Diesel check, RF pad, flange orientation, trusses, bottom & roof plate
dimension, ladder, platform orientation Wind girder , roof drain orientation, Overtly check , diameter of
tank as per approved drawing.
 Repair tank inspection as per API 653 Codes.
 Inspection of test separator and heater teeter structural frame as per approved drawing
4. Al-Suwaidi Trading & Development Co. Ltd.| Al-Khobar, Saudi Arabia
QC Welding & Piping Inspector Since 5th August 2007 – 13th August 2009 For Tasnee Ethylene
Cracking Furnace, OIEC, SSEM and Yuksel INSAAT Project. (2 years)
RESPONSIBILITIES:
 Inspection of Incoming Material as per Test Certificate and traceability records.
 Reviewing the Documents such as WPS/PQR, Welding consumable Control procedure and Vendor
documents of Metering skid according to specification.
 Inspection of piping spool before welding, fit-up inspection of joints e.g. root gap, root face, bevel angle
and checking the Pre-heat temperature to avoid hydrogen cracking as per approved WPS.
 Inter Pass temperature and post weld heat temperature (PWHT) inspection during and after welding of
alloy Steel Material like P11 and P22 materials.
 Fit up and welding inspection of Inconel & clad material piping as per approved drawing and related
WPS.
 During welding checking Welding Parameters like polarity, current, voltage, position & direction of
welding as per approved WPS.
 Final dimension and weld visual inspection of piping joints as per Section IX and ASME B31.3
requirements.
 Proper Inspection of Pre-heating and PWHT of Alloy Steel Material (P11 & P22) and LTCS Material.
 Monitoring WQT of welders as per Section IX.
 Monitoring Welders for Correct usages of WPS and effective as well as cost control welding technique
 Monitoring Weld Repairs and Resolving as per procedure.
 Reviewing NDT and RT Films as per ASME Section V.
 Handling DWR of daily progress of Welding and fit-up joints of piping.
 Witness of Hydro-testing of Piping fabricated spool.
 Inspection of piping supports and structural supports.
 Inspection of all headers & spool piece for furnace as per approved drawing.
 Review of P & ID, Isometric & Plot plan drawing for proper inspection.
 Inspection of Spool Fabrication of piping, Piping Headers and pipe supports as per drawing
 Inspection of different types and sizes of valves as per approved drawing.
 Inspection of Site Erection & Installation of all the Instruments according to the Pressure.
 Site Inspection and implementation of installation of piping as per drawing and quality specification of
project requirement.
 Inspection of Fabrication of ladder & platform Welding and fit-up as per approved drawing.
 Inspection of New crude oil tank and Repair Tank as per API 650 & API 653.
 Diesel check inspection for bottom plate & trusses weld leakage of tanks.
 Hydrostatic test of heating coils of crude oil tanks.
 Inspection of Flange orientation as per approved drawing for tanks.
 Proper bending operation for hand rail & tank wind girder of tanks.
 Welding of tank as per approved WPS.
 Fully aware about productivity & efficiency rate of piping related processes, consumables & resources.
 Planning of work and delegate to contractor.
 Monitoring progress & take preventive as well as corrective action
 Hydro-test as per design pressure and temperature for test pack.
 Planning of work and delegate to Contractor.

4.  Monitoring Quality report & take preventive as well as corrective action.
 Ensuring the relevant documents such as route sheets, WPS, drawings, etc. are available with the
welders or operators during work.
5. Desein Pvt. Ltd.| near Savitri Cinema Delhi
PipingEngineer 1st August2006 – 30th May 2007 forMathon Left BankProject.(11 Months)
RESPONSIBILITIES :
 Fabricating pipe spool as per Approved Isometric drawings.
 Review of P & ID and plot plan for installation and erection of piping spool on site.
 Arrangement of equipment’s related to welding & other activities.
 Review all the activity related to pipe lying.
 Fabricating piping supports and structural supports.
 Proper Co-ordination with QC people for welding and IMIR of materials.
 Hydro-test as per design pressure and temperature.
 Obeying safety related activities.
6. Jacobs H & G Pvt. Ltd. | Okhla Phase III, Delhi
Inspection Engineer 1st September 2004– 20th July 2006 for Reliance Industries Project. (1 year 10
Months)
RESPONSIBILITIES:
 Inspection of pipes and fittings, Consumables, welding Machine for spool fabrication.
 Reviewing daily progress report for welding as fit up of spool fabrications.
 Piping inspections like Fit-Up, Erection, Installation, etc.
 Inspection of various types of industrial equipment such as Pumps, Valves, Piping Systems, Pipeline and
Various Tanks such as Crude Oil Tanks, Water Tanks, Chemical Injection Skid Tanks etc.
 Verify welding parameters and consumables during installation/construction activities.
 Verifying procedures and welders qualifications test.
 Looking after the entire tasks from design, fabrication and till the preparation of erection drawings.
 Developing Field Isometric, Piping Sketch and Welding Maps Drawings using AutoCAD software.
 Providing support to the organization in meeting the customers need.
 Working knowledge of design, manufacture, metallurgy, welding standards and legislation associated
with inspection of plant /equipment and familiar with QA/QC system and procedures.
 Technical ability in understanding codes, standards and inspection methods.
 Knowledge of HSE procedures & practices, planning and organizing, scheduling and Coordinating,
checking, Examining and recording.
 Assisting in the preparation and maintenance of various quality control standards, qualification of
welding procedure specifications and completing final inspection of Piping.
 Conducting WQT, PQR as per Client Requirement for welder and Procedure Qualification.
 Conducting Hydro-test and Pneumatic Test for Piping, Pipeline and Tanks.
 Check the availability and suitability of the welding equipment, filler material, pre-heating, welding,
heat treatment, bevels, the extent of the repairs made by the various welders (taking any corrective
action required), the heat treatment record diagrams.
 Perform pipes line up check, ensuring that all installed pipe/fittings are compliant to the correct
specification and that the material is in accordance with the specified material traceability requirements.
 Carry out visual inspections and issues relevant reports.
 Handle all piping & welding technical queries.
 Ensure that all welding, heat treatment and any hardness testing are in compliance with the relevant
codes and specifications.
 Orderly collect and manage/check documents certifying tests, controls and inspections documents,
ensuring that all welding and testing related records form a complete package and reflect the As Built
as accordingly.
 Ensure the correct implementation of the approved Quality Control Plans/Inspection Test Plans relevant
to welding by organization in charge of construction activities.
 Examine visually work in progress and effectively supervise repair procedures.
 Review welding requirements for field erected Structures, vessels, tanks, boilers and other process
plants
 Punch Listing for Walk down & Reinstatement of Test Pack.
 Pipe book Verification for Pipeline Process.
 Interpretation of Weld Joints
7. Rakhoh Enterprises, MIDC, Pune.
QC Engineersince 20th May 2003–15th August 2004 Thermax Ltd. Pune.( 1 year3 Months)
RESPONSIBILITIES:
 Inspection of Incoming Material as per Test Certificate and traceability records.
 Reviewing the Documents such as WPS/PQR, Welding consumable Control procedure and Vendor
documents of Metering skid according to specification.

5.  Inspection of piping spool before welding, fit-up inspection of joints e.g. Root gap, root face, bevel
angle and checking the Pre-heat temperature to avoid hydrogen cracking as per approved WPS.
 Inspection of welding and welding consumables as per approved WPS.
 Visual Inspection of weld joint as per acceptance criteria.
 Bending Inspection of plate, pipe for storage tanks and ladder of tanks as per approved drawing.
 Calibration and related documentation for welding machines, inspection tools, consumables.
 Checking all dimensions as per approved drawing as well as Documentation as per project.
 Monitoring WQT of welders as per Section IX.
 Monitoring Welders for Correct usages of WPS and effective as well as cost control welding technique
 Monitoring Weld Repairs and Resolving as per procedure.
 Reviewing NDT and RT Films as per ASME Section V.
 Handling DWR of daily progress of Welding and fit-up joints of piping.
 Preparing requests and coordinate with vendors for radiographic tests, load test etc.
 Witness of Hydro-testing of Piping fabricated spool.
 Performs welding inspection to monitor & verify the welding parameters to ensure correct essential
Variable and supplementary parameters are followed.
8. Rewale Engineering Pvt. Ltd| MIDC, Pune.
QC Inspector Since 20th May 2002– 20th January 2003 For Tata Telco, Pune (8 Months)
RESPONSIBILITIES:
 Inspection of Raw material as per test certificates.
 Inspection of actual product after production as per approved drawing.
 Ensuring all dimension of test piece for mass production.
 Review all the documents related to design for inspection.
Knowledge Purview:
 Well versed with the following Standards:
 ASME SEC IX, ASME SEC VIII, ASME SEC II and ASME Sec V
 API 1104, API 650 and API 653
 AWS D1.1 and AWS D1.6
Personal Details:
Date of Birth : 2nd April, 1979
Language : Fluent in English, Hindi, and Urdu.
Nationality : Indian
Passport Number : L1181793,
Date of Issue : 09.05.2013,
Date of Expiry : 08.05.2023
Place of Issue : Abu Dhabi
Driving License : Indian
Education & Certification
 B.TECH in Mechanical Engineering from PSC, Faridabad
 Diploma in Mechanical Engineering from K.C.T Polytechnic, Gulbarga | Karnataka
 CSWIP 3.1 (Certified Welding Inspector) From TWI UK , Cert. No.- 80495 , Expiry Date-
10.10.2018
 ASNT LEVEL II ( RT, PT , UT, MT ) From Dona World, Kolkata
 QMS ISO 9001-2008 Lead Auditor.
 SAUDI ARAMCO APPROVAL as a Site QC Manager
 SAUDI ARAMCO APPROVAL as a Piping QC Inspector
 Auto CAD Training from ESSAR Computers, Gulbarga, Karnataka in 2001.
 Design & Mfg. Technique Using CAD/CAM Certification from Indo Danish Tool Room(IDTR)
Jamshedpur Govt. of India(Ministry of SSI)